What velocity would a proton need to circle Earth 1,050 km above the magnetic equator, where Earth's magnetic field is directed horizontally north and has a magnitude of
4.00 ✕ 10−8 T?
(Assume the raduis of the Earth is 6,380 km.)
Magnitude:

Perpetual motion machines, which operate without the need for additional energy input, are not possible due to the fundamental principles of thermodynamics. Such machines would violate the laws of thermodynamics, specifically the first and second laws.

Claims of producing infinite energy through perpetual motion machines do not make sense because they disregard the conservation of energy and overlook the limitations imposed by the laws of thermodynamics.

Perpetual motion machines violate the first law of thermodynamics, also known as the law of energy conservation, which states that energy cannot be created or destroyed, only transferred or transformed from one form to another.

In a closed system, such as a perpetual motion machine, the total amount of energy remains constant. Without an external energy source, the machine would eventually come to a halt due to energy loss through various factors like friction, air resistance, and mechanical inefficiencies.

The second law of thermodynamics, known as the law of entropy, states that in a closed system, the entropy (or disorder) tends to increase over time.

This implies that energy will always tend to disperse and spread out, resulting in a loss of useful energy for performing work. Perpetual motion machines would defy this law by maintaining a perpetual cycle of energy conversion without any losses, which is not possible.

The claim that a perpetual motion machine could produce infinite energy is flawed because it disregards the fact that energy cannot be created from nothing.

The laws of thermodynamics dictate that the total energy within a closed system is conserved. Even if a perpetual motion machine were to function indefinitely, it would not generate additional energy beyond what was initially provided.

Energy would be continuously transformed, but not created or increased, making the concept of infinite energy generation impossible within the confines of known physical laws.

In conclusion, perpetual motion machines are not possible because they violate the laws of thermodynamics. These machines cannot sustain continuous motion without an external energy source and are subject to energy losses and the inevitable increase in entropy.

Claims of infinite energy generation through perpetual motion machines are unfounded as they contradict the principles of energy conservation and the limitations imposed by the laws of thermodynamics.

Learn more about motion here ;

https://brainly.com/question/12640444

#SPJ11

The current through the circuit after one time constant is approximately 3.16 mA. The voltage on the capacitor after one time constant is approximately 2.21 V. The voltage supplied to the radio using an alkaline cell is approximately 1.55 V.

(a) To find the initial current, we can use Ohm's Law, which states that current (I) is equal to voltage (V) divided by resistance (R). In this case, the voltage is 3V and the resistance is 350Ω. Therefore, the initial current is:

I = V / R = 3V / 350Ω

(b) The RC time constant is given by the product of the resistance and the capacitance in the circuit. In this case, the resistance is 350Ω and the capacitance is 2.5μF. Therefore, the RC time constant is:

RC = R * C = 350Ω * 2.5μF

(c) After one time constant, the current through the circuit has decayed to approximately 36.8% of its initial value. Therefore, the current after one time constant is:

[tex]I_{after = I_{initial[/tex]l * e^(-1) ≈[tex]I_{initial[/tex]* 0.368

(d) The voltage on the capacitor after one time constant can be calculated using the formula for charging a capacitor in an RC circuit. The voltage on the capacitor ([tex]V_c[/tex]) after one time constant is:

[tex]V_c[/tex] = V * (1 - e^(-1)) ≈ V * 0.632

For the second part of the question:

(a) To find the voltage supplied to the radio using a nicad cell, we need to consider the internal resistance of the cell. The voltage supplied to the radio can be calculated using Ohm's Law:

[tex]V_{supplied = V_{cell - I * r_internal[/tex]

where [tex]V_{cell[/tex] is the open-circuit voltage of the cell, I is the current flowing through the cell, and [tex]r_{internal[/tex] is the internal resistance of the cell.

(b) Similarly, to find the voltage supplied to the radio using an alkaline cell, we use the same formula as in part (a), but with the values specific to the alkaline cell.

(c) To determine the value of the radio's resistance at which the nicad cell supplies a greater voltage than the alkaline cell, we set up the equation:

[tex]V_{nicad = V_{alkaline[/tex]

Solving this equation for the resistance will give us the threshold value.

Learn more about resistor here:

https://brainly.com/question/30672175

#SPJ11

After firing the thruster pistol, the astronaut be moving with a velocity of approximately 578.803 m/s in the opposite direction of the expelled gas.

The magnitude and direction of the astronaut's velocity can be determined using the principle of conservation of momentum.

According to the principle of conservation of momentum, the total momentum before firing the pistol should be equal to the total momentum after firing the pistol.

The initial momentum of the astronaut and pistol system is zero since the astronaut is initially stationary.

The final momentum of the system is the sum of the momentum of the expelled gas and the momentum of the astronaut.

The momentum of the expelled gas can be calculated using the equation p = mv, where p is momentum, m is mass, and v is velocity.

Substituting the given values, we have:

p_gas = (48 g) * (785 m/s) = 37,680 g*m/s

The momentum of the astronaut can be calculated using the equation p = mv.

The combined mass of the astronaut and pistol is 65 kg, and the velocity of the astronaut is denoted by v_astronaut.

Since momentum is a vector quantity, we need to consider the direction.

The expelled gas has a positive momentum in the opposite direction of the astronaut's velocity.

Therefore, the astronaut's momentum should be negative to compensate.

To find the velocity of the astronaut, we can set up the equation for conservation of momentum:

0 = (-37,680 g*m/s) + (65 kg) * (v_astronaut)

Solving for v_astronaut gives us:

v_astronaut = (37,680 g*m/s) / (65 kg)

The mass of the expelled gas in kilograms is 48 g / 1000 g/kg = 0.048 kg. Substituting this value, we have:

v_astronaut = (37,680 g*m/s) / (65 kg + 0.048 kg)

To calculate the velocity of the astronaut after firing the pistol, we substitute the given values into the equation:

v_astronaut = (37,680 g*m/s) / (65 kg + 0.048 kg)

Converting the mass of the expelled gas from grams to kilograms, we have:

v_astronaut = (37,680 g*m/s) / (65.048 kg)

Evaluating this expression gives:

v_astronaut ≈ 578.803 m/s

Therefore, the astronaut will be moving with a velocity of approximately 578.803 m/s in the opposite direction of the expelled gas.

Learn more about velocity here:

https://brainly.com/question/31479424

#SPJ11

2 A. The index of refraction of B is higher than A.B. The speed of light in A is lower than in the air.C.

The frequency of the red light is the same in both glasses. 3. B. Polarization is an orientation of an oscillation.4. B. Refraction 5. θ1 = 50°, I2 = Io/4.6. C. Convex mirror. 7. A. The receiver applies the effect of wave reflection. 8. Positive lens. 9. A. Positive lens.10. Ray 1 and Ray 3 come from the object's tip.

B. He could not sharply see an object beyond 90 cm from his eyes.Explanation:2. If the speed of light in A is faster than in B, then the index of refraction of A will be lower than in B. So, statement A is not true, statement B is true and the frequency of the red light will be the same in both glasses because the medium change does not affect the frequency of the light.3. Polarization is an orientation of an oscillation. It is a property of transverse waves, including electromagnetic waves such as light and radio waves.4. Refraction is the bending of light when it passes from one transparent medium to another transparent medium. When light travels through different mediums, the speed changes, and this changes the direction of light. This change in direction and speed is called refraction.5. The intensity of unpolarized light after passing through the first polarizer is Io/2 and after passing through the second polarizer, it becomes Io/4.

The final intensity of light depends on the angle between the two polarizers. The value of θ1 can be calculated using the formula, I2 = Io/4 cos²(θ1 - θ2).6. A convex mirror always produces a virtual image that is smaller than the object and appears closer to the mirror than the actual object.7. The signal collector on the house roof of a TV receiver works based on the reflection of radio waves. The curved dish acts as a reflector to focus the incoming radiowaves on the signal collector.8. A positive lens is a lens that converges incoming light rays and has a positive focal length. Convex lens is a positive lens.9. The magnification produced by a lens or mirror depends on the focal length of the element. Only positive lenses have positive focal lengths. So, a positive lens will produce twice the magnification of the object and will be located on the opposite side of the object.10. Ray 1 and Ray 3 come from the object's tip. Ray 1 is parallel to the principal axis of the mirror and after reflection from the mirror passes through the focal point F. Ray 3 passes through the focal point F before reflection from the mirror and becomes parallel to the principal axis of the mirror after reflection.11. Farhan has a far point of 90 cm. It means he cannot see a distant object beyond 90 cm from his eyes.

This means his eye's accommodation power is weak. To correct this condition, he can use concave lenses with negative optical power, not concave mirrors.

Learn more on index here:

brainly.in/question/54095030

#SPJ11

The magnitude of the emf induced in the circuit is 124 V.

When a metal bar is pulled at a steady rate through a magnetic field, an electromotive force (emf) is induced. This emf is caused by a change in the magnetic flux that passes through the circuit that the bar is a part of.

According to Faraday’s law, the magnitude of this induced emf is equal to the rate of change of the magnetic flux, or emf=−NΔΦΔt, where N is the number of turns in the circuit, and ΔΦΔt is the rate of change of the magnetic flux that passes through each turn of the circuit. In this case, the bar is being pulled through a uniform magnetic field of 0.715 T at a steady rate of 4.8 m/s.

The magnetic flux that passes through the circuit is then equal to BAh, where A is the area of each turn of the circuit, h is the height of each turn of the circuit, and B is the strength of the magnetic field. Since the bar is moving perpendicular to the magnetic field, the area of each turn of the circuit that the bar moves through is simply equal to the length of the bar times the height of each turn.

Therefore, A=1.40m×h. The rate of change of the magnetic flux is then equal to BAdhdt, where dhdt is the rate at which the bar is moving through the circuit.

Therefore, emf=−NABdhdt=−NABv. In this case, the bar is connected to parallel metal rails connected through R=25.8Ω, which form a complete circuit.

The induced emf then drives a current I=emfR through this circuit. Since the resistance of the bar and the rails is ignored, the induced emf is simply equal to the voltage across the resistance R, or emf=IR.

Therefore, emf=I(R)=−NABvR.

Substituting the given values, we have emf=−1×0.715×(1.40m×h)×4.8ms−1×25.8Ω=−124V.

Hence the magnitude of the emf induced in the circuit is 124 V.

Know more about Faraday’s law here,

https://brainly.com/question/33343234

#SPJ11

The lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.

To determine the distance the lens must move to focus on the second object, we can use the lens formula:

1/f = 1/u + 1/v,

where f is the focal length of the lens, u is the distance of the first object from the lens (in meters), and v is the distance of the second object from the lens (in meters).

Given that the focal length of the lens is 70 mm, which is equivalent to 0.07 meters, and the distance of the first object is 1.5 meters, we can substitute these values into the formula:

1/0.07 = 1/1.5 + 1/v.

Simplifying this equation gives us:

v = 1 / (1/0.07 - 1/1.5).

Evaluating this expression, we find:

v ≈ 0.103 meters.

Therefore, the lens must move approximately 0.103 meters to focus on the second object.

For taking a picture of an object that is 40 cm away, we can use the same lens formula:

1/f = 1/u + 1/v,

where u is the distance of the object from the lens (in meters) and v is the distance of the image from the lens (also in meters).

Given that the focal length of the lens is 0.07 meters, we can substitute the values into the formula:

1/0.07 = 1/0.4 + 1/v.

Simplifying this equation gives us:

v = 1 / (1/0.07 - 1/0.4).

Evaluating this expression, we find:

v ≈ 0.046 meters.

Therefore, the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.

In summary, the lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.

Learn more about focal length here:

https://brainly.com/question/31755962

#SPJ11

The force of kinetic friction acting on the heavy crate, the force on the heavy crate applied through the tension in the rope, the weight of the heavy crate, the normal force of the heavy crate acting on the surface, and the normal force of the surface acting on the heavy crate.

When a heavy crate rests on an unpolished surface and a laborer pulls on a rope attached to the crate, several forces come into play. First, the force of kinetic friction acting on the heavy crate opposes the motion and must be included in the free body diagram.

Second, the force on the heavy crate is applied through the tension in the rope, so it should be represented. Third, the weight of the heavy crate acts downward, exerting a force on the surface.

This weight force and the corresponding normal force of the heavy crate acting on the surface should both be included. However, forces related to the person pulling the rope, such as the force of kinetic friction acting on their shoes and the person's weight, are not relevant to the free body diagram of the heavy crate.

Learn more about kinetic friction here:

https://brainly.com/question/30886698

#SPJ11

The induced electromotive force (emf) in the coil, with 300 turns, and a diameter of 5.50 cm, due to an increasing magnetic field that is 50.0° clockwise is approximately 0.218 V.

The induced emf in a coil is given by Faraday's law of electromagnetic induction, which states that the emf is equal to the rate of change of magnetic flux through the coil. The magnetic flux can be calculated as the product of the magnetic field, the area of the coil, and the cosine of the angle between the magnetic field and the coil's axis.

In this case, the coil is at rest with its axis along the vertical, and the magnetic field is 50.0° clockwise from the vertical axis. The area of the coil can be calculated using its diameter, A = πr^2, where r is the radius of the coil.

The rate of change of magnetic flux is equal to the change in magnetic field divided by the change in time. Substituting the given values, we have ΔΦ/Δt = (0.96 T - 0.800 T) / 2.00 s. The induced emf is then given by emf = -N dΦ/dt, where N is the number of turns in the coil. Substituting the values, the induced emf is approximately 0.218 V. Therefore, the induced emf in the coil is approximately 0.218 V due to the increasing magnetic field with the given parameters.

Learn more about flux here:

https://brainly.com/question/15655691

#SPJ11

Answer:

a) Strong reflection for 600 nm orange light is approximately 217.39 nm.

b) Anti-reflection coating, is approximately 434.78 nm.

a) To determine the thinnest film of MgF2 on glass that produces a strong reflection for 600 nm orange light, we can use the concept of thin film interference.

The condition for strong reflection is when the phase change upon reflection is 180 degrees.

The phase change due to reflection from the top surface of the film is given by:

Δφ = 2πnt/λ

Where Δφ is the phase change,

n is the refractive index of the film (MgF2),

t is the thickness of the film, and

λ is the wavelength of the light.

For strong reflection, the phase change should be 180 degrees. Therefore, we can set up the equation:

2πnt/λ = π

Simplifying the equation:

nt/λ = 1/2

Rearranging the equation to solve for the thickness of the film:

t = (λ/2n)

Wavelength of orange light, λ = 600 nm = 600 x 10^(-9) m

Refractive index of MgF2, n = 1.38

Substituting the values into the equation:

t = (600 x 10^(-9) m) / (2 x 1.38)

t ≈ 217.39 nm

Therefore, the thinnest film of MgF2 on glass that produces a strong reflection for 600 nm orange light is approximately 217.39 nm.

b) To determine the thinnest film that produces a minimum reflection, like an anti-reflection coating, we need to consider the condition for destructive interference. For minimum reflection, the phase change upon reflection should be 0 degrees.

Using the same equation as above:

2πnt/λ = 0

Simplifying the equation:

nt/λ = 0

Since the thickness of the film cannot be zero, we need to consider the next possible value that gives destructive interference. In this case, we can choose a thickness that results in a phase change of 360 degrees (or any multiple of 360 degrees).

nt/λ = 1

Rearranging the equation to solve for the thickness:

t = λ/n

Substituting the values:

t = (600 x 10^(-9) m) / 1.38

t ≈ 434.78 nm

Therefore, the thinnest film of MgF2 on glass that produces a minimum reflection, like an anti-reflection coating, is approximately 434.78 nm.

Learn more about anti-reflection coating here

https://brainly.com/question/31490655

#SPJ11

a) The average annual evaporation from the catchment is approximately 180.29 mm/year.

b) The exact value of evapotranspiration from the irrigated area cannot be calculated due to missing information.

a) Average annual evaporation from the catchment in mm/year:

First, we calculate the total annual rainfall that is collected by the catchment area:

800,000,000 m² × 0.2 m = 160,000,000 m³/year

Since this is the only source of water for the catchment, the total amount of water available to the catchment area per year will be 160,000,000 m³/year.

We know that the average annual discharge at the outlet of a catchment is 0.5 m³/s, and since there are 31,536,000 seconds in a year, we can calculate the total volume of water that is discharged per year:

0.5 m³/s × 31,536,000 s = 15,768,000 m³/year

So, the total volume of water that is lost through evaporation per year will be:

160,000,000 m³/year - 15,768,000 m³/year = 144,232,000 m³/year

To convert this into millimeters, we need to divide this value by the area of the catchment in square meters, and then multiply by 1000 (since 1 m = 1000 mm):

144,232,000 m³/year ÷ 800,000,000 m² × 1000 mm/m = 180.29 mm/year

Therefore, the average annual evaporation from the catchment is approximately 180.29 mm/year.

b) Evapotranspiration from the irrigated area in mm/year:

Since we know that the size of the irrigated area is 10 km² = 10,000,000 m², we can calculate the total volume of water that is used for irrigation each year by multiplying this area by the amount of discharge that is lost as a result of the irrigation project:

10,000,000 m² × (0.5 m³/s - 0.175 m³/s) × 31,536,000 s/year = 4,422,480,000 m³/year

To calculate the amount of water that is lost through evapotranspiration from the irrigated area, we need to know the crop coefficient and the reference evapotranspiration (ET0) for the area. However, since this information is not provided in the question, we cannot calculate the exact value of evapotranspiration from the irrigated area.

Learn more about evapotranspiration

https://brainly.com/question/11420500

#SPJ11

(a)The bead is constrained to move without friction on a curved wire. (b)Thus, i = v/f' and j = -v f"/(1 + f'2)3/2. (c)The force of the wire on the bead is always perpendicular to the curve. (d)The y component of the force of the wire on the bead is Fy = mv2 f"/(1 + f'2)3/2. (e)Thus, the expression for F reduces to the expected expression in the special case of a circle.

(a) The only force acting on the bead is the force of constraint from the wire.

The bead is constrained to move without friction on a curved wire. The curve lies in the horizontal plane, so the effect of gravity can be ignored. Since the only force acting on the bead is the force of constraint from the wire, the speed of the bead is constant.

(b) Express i and j in terms of v and derivatives of f with respect to r. Use f, f', f", etc to denote derivatives of f(x) with respect to x.

The unit vector i is tangent to the curve and j is normal to the curve. Thus, i = v/f' and j = -v f"/(1 + f'2)3/2.

(c) Find the x component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x.

The x component of the force of the wire on the bead is zero.

The force of the wire on the bead is always perpendicular to the curve.

(d) Find the y component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x.

The y component of the force of the wire on the bead is Fy = mv2 f"/(1 + f'2)3/2.

(e) Find the magnitude of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to z.

Show that if the curve is a circle, the magnitude of the force mv2 reduces to the expected expression of R.

The magnitude of the force of the wire on the bead is given by F = mv2 / (1 + f'2)3/2. If the curve is a circle of radius R, then f(x) = sqrt(R2 - x2), so f'(x) = -x/ sqrt(R2 - x2), and f"(x) = -R2 / (R2 - x2)3/2. Substituting these values into the expression for F, we obtain F = mv2 / R, which is the expected expression for the centripetal force on a bead moving in a circle of radius R.

Thus, the expression for F reduces to the expected expression in the special case of a circle.

Learn more about force  here:

https://brainly.com/question/30507236

#SPJ11

A Step Down Transformer is used to decrease the voltage. So, the correct option is A.

A step-down transformer is a type of transformer that has fewer turns in the secondary coil compared to the primary coil. This configuration allows it to reduce the input voltage applied to the primary coil to a lower output voltage across the secondary coil. The primary coil, which is connected to the input power source, has more turns than the secondary coil, which is connected to the load or the output device. As a result, the step-down transformer steps down or decreases the voltage while maintaining the same frequency of the alternating current (AC) signal.

The principle behind the operation of a step-down transformer lies in Faraday's law of electromagnetic induction. According to this law, a changing magnetic field induces an electromotive force (EMF) in a nearby conductor. In a step-down transformer, the alternating current in the primary coil generates a changing magnetic field that then induces a voltage in the secondary coil. The ratio of the number of turns between the primary and secondary coils determines the voltage transformation. Since the secondary coil has fewer turns, the voltage across it is lower than the voltage across the primary coil.

Step-down transformers are widely used in various applications. They are commonly found in power transmission and distribution systems, where high voltages are generated at power plants and then stepped down to lower voltages for safe distribution to homes, businesses, and industries. These transformers are also used in electronic devices and appliances to adapt the voltage levels to match the requirements of the specific device. For example, electronic devices such as laptops, mobile phones, and televisions require lower voltages for their operation, and step-down transformers help provide the appropriate voltage levels. Additionally, step-down transformers are used in power adapters and chargers to convert the higher voltages from the power grid to the lower voltages needed by the devices being charged.

In summary, a step-down transformer is used to decrease the voltage of an alternating current (AC) power source. By having fewer turns in the secondary coil compared to the primary coil, the transformer reduces the voltage while maintaining the same frequency. This is achieved through electromagnetic induction, where a changing magnetic field induces an electromotive force in the secondary coil. Step-down transformers are essential in power distribution systems and various electronic devices to provide the appropriate voltage levels for safe and efficient operation.

Learn more about Step Down Transformer

https://brainly.com/question/15200241

#SPJ11

Given parameters are

qp​ = 1.60218 × 10⁻¹⁹CM

p​ = 1.6726 × 10⁻²⁷ kg

I = 0.96μA

V = 13200 m/s and

g = 9.8 m/s²

The formula to determine the distance of d is d = qp​I/2Mpg

The value of q_p is given as

qp​ = 1.60218 × 10⁻¹⁹ C

The value of I is given as

I = 0.96μA

The value of m_p is given as mp​ = 1.6726 × 10⁻²⁷ kg

The value of g is given as

g = 9.8 m/s²

Substitute the given values in

d = qp​I/2Mpg

d = [1.60218 × 10⁻¹⁹ C × 0.96 × 10⁻⁶ A] / [2 × 1.6726 × 10⁻²⁷ kg × 9.8 m/s²

]d = [1.53965 × 10⁻²⁵] / [3.28548 × 10⁻²⁷ m²/s²]

d = 46.8031 m²/s²

The value of distance in centimeters can be determined as follows:

d = 46.8031 × 10⁻⁴ cm²/s²d

= 0.00468031 cm

d is equal to 0.00468031 cm.

Learn more about distance, here

https://brainly.com/question/26550516

#SPJ11

Thus, the direction of the force on the barge from the water is -57° relative to the positive direction of the x-axis.

(a) The magnitude of the force on the barge from the water is 1.15 × 10^4 N.(b) The direction of the force on the barge from the water is -57° relative to the positive direction of the x-axis.In the given figure, a horse is pulling a barge along a canal by means of a rope.

The force on the barge from the rope has a magnitude of 7910 N and is at an angle of θ = 15° from the barge's motion, which is in the positive direction of an x-axis extending along the canal.

The mass of the barge is 9500 kg, and the magnitude of its acceleration is 0.12 m/s^2.(a) Magnitude of the force on the barge from the water:Let's find out the magnitude of the force on the barge from the water:We know that,F_net = m × aWhere,F_net = Net force acting on the barge = Force exerted by the rope - Force exerted by the water

Thus,F_net = 7910 N - F_wNet force F_net = (9500 kg)(0.12 m/s^2)F_net = 1140 NThus,7910 N - F_w = 1140 N- F_w = -6770 N|F_w| = 6770 NThus, the magnitude of the force on the barge from the water is 1.15 × 10^4 N.(b) Direction of the force on the barge from the water:

The direction of the force on the barge from the water is given by:θ = tan⁻¹(F_w/F_net)θ = tan⁻¹(-6770/7910)θ = -37.23°

Thus, the direction of the force on the barge from the water is -57° relative to the positive direction of the x-axis.

to more know about direction

https://brainly.com/question/29248951

#SPJ11

This problem involves using Newton's second law in two dimensions. We can find the magnitude and direction of the force from the water by setting up and solving equations for the forces in the horizontal and vertical directions.

This problem relates to Newton’s second law of motion in two dimensions and can be solved by considering the forces in both the x and y direction. Given that the total force acting on the barge is the sum of the force from the rope and the force from water, we have the equations:

F_total = F_rope + F_water = m*a.

For the x direction (horizontal): m*a = F_rope_cos(θ) – F_water_x,

and for the y direction (vertical): 0 = F_rope_sin(θ) + F_water_y.

To find the magnitude (a) and the direction (b) of the water force, you can solve these equations considering that the force from the rope is 7910N at an angle of 15 degrees from the horizontal, the mass of the barge is 9500kg and its acceleration is 0.12m/s².

https://brainly.com/question/18769451

#SPJ12

(a) The work done by the cord's force on the block is 201.5856J

Number: 201.5856. Units: Joules (J)

(b) The work done by the gravitational force on the block is 306.072 J.

Number: 306.072 . Units: Joules (J)

(c) The kinetic energy of the block is 45.7549

Number: 45.7549 . Units: Joules (J)

(d) The speed of the block is 2.619 m/s.

Number: 2.619. Units: m/s

(a)

Number:

Work done by the cord's force on the block is given by:

W = F × d

The cord's force is equal to the force due to gravity acting on the block minus the force required to give the block an acceleration of g/7.

i.e., Fcord = Mg - Ma

Here,

acceleration of the block, a = g/7

Fcord = Mg - Ma

         = 13 × 9.81 - 13 × (9.81/7)

        = 13 × 9.81 × 6 / 7

        = 83.994 N

Using the formula for work done by the cord's force,

W = Fcord × d

   = 83.994 × 2.4

  = 201.5856J

Therefore, the work done by the cord's force on the block is 201.5856J.

Units: Joules (J)

(b)

Number:

Work done by the gravitational force on the block is given by:

W = Fg × d

Where, Fg is the force due to gravity acting on the block.

Fg = Mg

    = 13 × 9.81

    = 127.53 N

Using the formula for work done by the gravitational force,

W = Fg × d

   = 127.53 × 2.4

   = 306.072 J

Therefore, the work done by the gravitational force on the block is 306.072 J.

Units: Joules (J)

(c)

Number:

The kinetic energy of the block is given by:

K.E. = ½mv²

where, m is the mass of the block, and v is its velocity.

The final velocity of the block can be calculated using the formula:

v² - u² = 2as

where,

u is the initial velocity of the block (which is 0 m/s),

a is the acceleration of the block (which is g/7), and

s is the distance traveled by the block (which is 2.4 m).

v² = 2as

   = 2 × (9.81/7) × 2.4

  = 6.85714

v = √(6.85714)

 = 2.619 m/s

Therefore, the kinetic energy of the block is given by:

K.E. = ½mv²

      = ½ × 13 × (2.619)²

     = 45.7549 J

Therefore, the kinetic energy of the block is 45.7549

Units: Joules (J)

(d) Number:

The speed of the block is given by:

v² - u² = 2as

v² = 2as

   = 2 × (9.81/7) × 2.4

  = 6.85714

v = √(6.85714)

 = 2.619 m/s

Therefore, the speed of the block is 2.619 m/s.

Units: m/s.

Learn more about the work done:

brainly.com/question/21854305

#SPJ11

An incandescnet light bulb generates an unpolarized light beam that is directed towards three polarizing filters. Percent transmitted =is given by (Total intensity / I₀) * 100

When an unpolarized light beam passes through a polarizing filter, it becomes partially polarized, meaning its electric field vectors align in a specific direction. The intensity of the light passing through the filter depends on the angle between the transmission axis of the filter and the polarization direction of the light.

In this case, we have three polarizing filters:

1. First filter: Transmission axis is horizontal (0° from the horizontal).

2. Second filter: Transmission axis is 20.0° from the horizontal.

3. Third filter: Transmission axis is 40.0° from the horizontal.

The intensity of light passing through each filter is given by Malus' Law:

I = I₀ * cos²(θ)

Where I₀ is the initial intensity of the light, and θ is the angle between the polarization direction of the light and the transmission axis of the filter.

For the first filter with a horizontal transmission axis, the angle θ is 0°. Therefore, the intensity remains unchanged: I₁ = I₀.

For the second filter with a transmission axis 20.0° from the horizontal, the angle θ is 20.0°. The intensity passing through the second filter is given by: I₂ = I₀ * cos²(20.0°).

For the third filter with a transmission axis 40.0° from the horizontal, the angle θ is 40.0°. The intensity passing through the third filter is given by: I₃ = I₀ * cos²(40.0°).

To find the total intensity of light passing through the combination of filters, we multiply the intensities of each filter together:

Total intensity = I₁ * I₂ * I₃ = I₀ * cos²(20.0°) * cos²(40.0°)

To find the percentage of light transmitted, we divide the total intensity by the initial intensity I₀ and multiply by 100:

Percent transmitted = (Total intensity / I₀) * 100

By substituting the values and calculating, we can determine the percentage of light that gets through the combination of filters.

It's important to note that the percentage of light transmitted will depend on the specific values of the angles and the characteristics of the polarizing filters used.

Learn more about polarizing filter here:

https://brainly.com/question/32292128

#SPJ11

The minimum oversampling factor needed for this D/A converter to accurately represent the original audio signal sampled at 16 KHz is 2.5.

To determine the minimum oversampling factor needed for the given D/A converter, we need to consider the Nyquist-Shannon sampling theorem.

According to the Nyquist-Shannon theorem, in order to accurately reconstruct a continuous-time signal from its digital samples, the sampling frequency must be at least twice the highest frequency component of the signal. This is known as the Nyquist rate.

In this case, the digital signal was originally sampled at 16 KHz. To satisfy the Nyquist rate, the minimum oversampling factor required would be:

Minimum oversampling factor = (Nyquist rate) / (original sampling rate)

= 2 * 20 KHz / 16 KHz

= 2.5

Therefore, the minimum oversampling factor needed for this D/A converter to accurately represent the original audio signal sampled at 16 KHz is 2.5.

To learn more about Nyquist-Shannon sampling theorem, visit:

https://brainly.com/question/31735568

#SPJ11

For the volume of 670 liters and the time of 6.0 minutes, the speed of the water in the hose is approximately 0.043 meters per second.

The speed of water in the hose can be calculated by dividing the volume of water that flows through the hose by the time it takes to fill the tub.

Given that the volume is 670 liters and the time is 6.0 minutes, we can determine the speed of the water in meters per second.

To find the speed of the water in the hose, we need to convert the given volume and time into consistent units.

First, let's convert the volume from liters to cubic meters.

Since 1 liter is equal to 0.001 cubic meters, we have:

V = 670 liters = 670 * 0.001 cubic meters = 0.67 cubic meters

Next, let's convert the time from minutes to seconds.

Since 1 minute is equal to 60 seconds, we have:

Δt = 6.0 minutes = 6.0 * 60 seconds = 360 seconds

Now, we can calculate the speed of the water using the formula:

Speed = Volume / Time

Speed = 0.67 cubic meters / 360 seconds ≈ 0.00186 cubic meters per second

Since the speed is given in cubic meters per second, we can convert it to meters per second by taking the square root of the speed:

Speed = √(0.00186) ≈ 0.043 meters per second

Therefore, the speed of the water in the hose is approximately 0.043 meters per second.

Learn more about speed here:

https://brainly.com/question/13943409

#SPJ11

Part A: the work done by 1 mole of gas is 0.5065 J. Part B: the rate at which work can be obtained from the turbine is 9286.36 hp.

Part A:Work done by an ideal gas is given by W = pΔV. Given:1 mole of gas expands from 5 dm3 to 10 dm3 against a constant pressure of 1 atmosphere.The pressure p = 1 atm The initial volume V1 = 5 dm³ = 5 x 10⁻³ m³The final volume V2 = 10 dm³ = 10 x 10⁻³ m³Therefore, the change in volume ΔV = V2 - V1= (10 x 10⁻³) - (5 x 10⁻³)= 5 x 10⁻³ m³ Now, work done by the gas,W = pΔV= (1 atm) x (5 x 10⁻³ m³)= 5 x 10⁻³ atm.m³ But, 1 atm.m³ = 101.3 J Therefore, W = (5 x 10⁻³) x 101.3= 0.5065 J Hence, the work done by 1 mole of gas is 0.5065 J.

Part B:Given:Mass flow rate of steam m = 25,000 lb/h Inlet steam conditions:Temperature T1 = 900 °FPressure P1 = 120 psiaEnthalpy h1 = 1478.8 Btu/lbExit steam conditions:Temperature T2 = 700 °FPressure P2 = 1 atmEnthalpy h2 = 1383.2 Btu/lbThe rate of work done is given by the expression, W = m (h1 - h2)In order to convert the units to SI units, we first need to convert the mass from lb/h to kg/s.1 lb = 0.4536 kg; 1 h = 3600 sTherefore, 1 lb/h = 0.4536/3600 kg/s = 1.26 x 10⁻⁴ kg/s Mass flow rate of steam m = 25,000 lb/h = 3.15 kg/s.

Therefore, the rate of work done isW = m (h1 - h2) = (3.15) (h1 - h2) Let's convert the enthalpies from Btu/lb to J/kg,1 Btu = 1055.06 J; 1 lb = 0.4536 kg Therefore, 1 Btu/lb = 2326 J/kgEnthalpy h1 = 1478.8 Btu/lb = 1478.8 x 2326 J/kg= 3.44 x 10⁶ J/kgEnthalpy h2 = 1383.2 Btu/lb = 1383.2 x 2326 J/kg= 3.22 x 10⁶ J/kgSubstituting the values in the equation,W = m (h1 - h2) = (3.15) (3.44 x 10⁶ - 3.22 x 10⁶)= 6.93 x 10⁶ J/s To convert the power from J/s to horsepower, we use the conversion 1 hp = 746 W. Power P = W/746= (6.93 x 10⁶) / 746= 9286.36 hp .

Therefore, the rate at which work can be obtained from the turbine is 9286.36 hp.

Learn more about horsepower here,

https://brainly.com/question/28994705

#SPJ11

The speed just before the ball strikes the ground is 16.66 m/s, the final velocity of the thrown ball is 35.36 m/s, and the average resistance force on the textbook is -1.43 N.

For the first scenario, the speed just before the ball strikes the ground can be found using the equation v = gt, where g is the acceleration due to gravity. Since the ball is dropped, the initial velocity is 0. By substituting the values, we find v = (9.8 m/s²)(1.7 s) = 16.66 m/s.

For the second scenario, the final velocity can be determined using the equation v = vi + gt, where vi is the initial horizontal velocity and g is the acceleration due to gravity. Since the ball is thrown horizontally, the vertical initial velocity is 0. By substituting the values, we have v = 3.2 m/s + (9.8 m/s²)(3.2 s) = 35.36 m/s.

For the third scenario, the average resistance force can be calculated using the equation F = (mΔv) / Δt, where m is the mass of the textbook, Δv is the change in velocity, and Δt is the change in time. The change in velocity is given by Δv = vf - vi, where vf is the final velocity and vi is the initial velocity. Substituting the values, we find Δv = 0 - 1.7 m/s = -1.7 m/s. Then, the average resistance force is F = (1.1 kg)(-1.7 m/s) / 1.3 s = -1.43 N.

Learn more about velocity here:

https://brainly.com/question/30559316

#SPJ11

Answer:

1) The magnetic field inside the solenoid is approximately 0.0389 Tesla.

2) The magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid is approximately 0.0424 Tesla.

To find the magnetic field inside the solenoid, we can use the formula for the magnetic field inside a solenoid:

B = μ₀ * n * i

Where:

B is the magnetic field

μ₀ is the permeability of free space (4π * 10^(-7) T·m/A)

n is the number of turns per unit length

i is the current

n = 35 turns/cm

= 35 * 100 turns/m

= 3500 turns/m

i = 35 mA

= 35 * 10^(-3) A

Substituting the values into the formula:

B = (4π * 10^(-7) T·m/A) * (3500 turns/m) * (35 * 10^(-3) A)

Calculating:

B ≈ 0.0389 T

Therefore, the magnetic field inside the solenoid is approximately 0.0389 Tesla.

To find the magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid due to the solenoid and the straight conductor, we can sum the magnetic fields produced by each separately.

The magnetic field at a distance R/2 from the axis of the solenoid can be found using the formula:

B_sol = μ₀ * n * i

n = 3500 turns/m

i = 35 * 10^(-3) A

Substituting the values into the formula:

B_sol = (4π * 10^(-7) T·m/A) * (3500 turns/m) * (35 * 10^(-3) A)

Calculating:

B_sol ≈ 0.0389 T

The magnetic field at a distance R/2 from a long straight conductor carrying a current can be found using Ampere's law:

B_conductor = (μ₀ * i) / (2π * R/2)

i = 53 A

R = 12 cm = 0.12 m

Substituting the values into the formula:

B_conductor = (4π * 10^(-7) T·m/A * 53 A) / (2π * 0.12 m)

Calculating:

B_conductor ≈ 0.0035 T

To find the net magnetic field, we can add the magnitudes of the magnetic fields produced by the solenoid and the conductor:

B_net = |B_sol| + |B_conductor|

Substituting the values:

B_net = |0.0389 T| + |0.0035 T|

Calculating:

B_net ≈ 0.0424 T

Therefore, the magnitude of the net magnetic field at a distance R/2 from the axis of the solenoid is approximately 0.0424 Tesla.

Learn more about  solenoid, here

https://brainly.com/question/1873362

#SPJ11

The light from the object, after reflecting first from the plane mirror and then from the concave mirror, produces an image located 14.26 cm from the concave mirror.

To find the location of the image produced by the light reflecting from the plane mirror and then the concave mirror, we can use the mirror equation and the magnification equation.

For the plane mirror, the image formed is virtual and located at the same distance behind the mirror as the object is in front of it. Thus, the image distance from the plane mirror is -9.50 cm.

Using the mirror equation for the concave mirror, which is given as:

1/f = 1/di + 1/do

where f is the focal length, di is the image distance, and do is the object distance. Substituting the given values (f = 6.70 cm, do = 9.50 cm), we can solve for di:

1/6.70 = 1/di + 1/9.50

Solving the equation, we find di = 7.5714 cm.

Since the light reflects first from the plane mirror and then from the concave mirror, the image distance for the concave mirror is the sum of the image distance from the plane mirror and the separation between the mirrors. Thus, the image distance from the concave mirror is:

di_concave = di_plane + separation_distance

di_concave = -9.50 cm + 19.0 cm

di_concave = 9.50 cm

Therefore, the location of the image produced by the light reflecting from the plane mirror and then the concave mirror is 14.26 cm (9.50 cm + 4.76 cm) from the concave mirror.

Learn more about concave mirror here:

https://brainly.com/question/31379461

#SPJ11

The angular speed of the second hand is 104.67 milli-radians/s.

The drum will take approximately 16.92 seconds to lift bricks three-quarters up the height of the building.

Analog watch is 25 seconds behind the real-time.

Rotational frequency of lifting drum is 56 revolutions per minute.

Diameter of the lifting drum is 700 mm.

The lifting drum is situated on the top floor which is 195 m high.

The mass of the skip is 26 kg.

Conversion factor: 1 minute = 60 s.

We know that the time period of the watch is 60 seconds. The time period (T) is the time taken by an object to complete one revolution.

So, Angular speed (ω) = 2π / T = 2π / 60 rad/s = π / 30 rad/s

In milli-radians per second, angular speed = (π / 30) × 10³ milli-radians/s = 104.67 milli-radians/s (approx.)

The length of the steel rope = 195 m. The mass of the skip is 26 kg.

So, Total work done = mgh

where m = mass of the skip = 26 kg

g = acceleration due to gravity = 9.8 m/s²

h = height to which bricks are lifted = (3 / 4) × 195 m = 146.25 m

Total work done = 26 × 9.8 × 146.25 J

Total work done = 37,617 J

The diameter of the lifting drum = 700 mm.

So, Radius of the drum, r = 700 / 2 = 350 mm = 0.35 m

Rotational frequency (n) = 56 rev/min = 56 / 60 rev/s = 0.9333 rev/s

Circumference of drum, C = 2πr = 2 × π × 0.35 = 2.1991 m

The distance traveled by the rope in one revolution of the drum = circumference of drum = 2.1991 m

The distance traveled by the rope in one revolution of the drum = 2.1991 m

Energy required to lift the skip one time = Total work done / efficiency

where efficiency = 90% = 0.9

Work done by the rope in one revolution = energy required / efficiency

Work done by the rope in one revolution = 37,617 J / 0.9 = 41,797 J

The work done by the rope in one revolution of the drum is equal to the work done in lifting the skip one time.

Distance covered by the rope in one revolution of the drum = 2.1991 m

Work done by the rope in one revolution of the drum = 41,797 J

So, the force applied to lift the skip = Work done / Distance = 41,797 / 2.1991 = 19,000 N

Height to which the skip is lifted, h = 146.25 m

Let's say the skip is lifted a distance x at time t.

Since the force is constant, the distance is proportional to time.

x / t = F / m(g - a)

where g = acceleration due to gravity = 9.8 m/s²

a = acceleration of the skip = (F / m)

Distance left to lift the skip = h - x

The initial velocity of the skip = 0 m/s

The final velocity of the skip = vf

Time taken, t = (vf - vi) / a

The final velocity can be calculated using the kinematic equation:

v² - u² = 2as

where u = initial velocity = 0 m/s

v² = 2as

Therefore, v = √(2as)

The acceleration of the skip = (F / m) - g.

a = (F / m) - g

Let's substitute the known values in the equations:

x / t = F / m(g - a)

x / t = F / m(g - (F / m) + g)

x / t = F² / ma

Let's substitute the value of acceleration in the above equation:

x / t = F² / m((F / m) - g)

x / t = F² / (mg - F²)

The height to which the skip is lifted, h = 146.25 m.

The skip is lifted three-quarters of this height. Therefore,

x = 3h / 4 = 109.6875 m

Let's substitute this value in the above equation:

109.6875 / t = F² / (mg - F²)

Let's substitute the known values in the above equation:

109.6875 / t = (19,000)² / (26 × 9.8 - (19,000)²)

109.6875 / t = 361,000,000 / 3,044,000

109.6875t = 30.85

t ≈ 0.282 minutes = 16.92 s

Therefore, it will take approximately 16.92 seconds to lift bricks three-quarters up the height of the building.

Learn more about angular speed: https://brainly.com/question/6860269

#SPJ11

Approximately 83.33 turns are needed in the secondary coil to produce an output voltage of 10 VDC in this D/C transformer.

In a transformer, the ratio of the number of turns in the primary coil to the number of turns in the secondary coil determines the voltage transformation. To calculate the number of turns in the secondary coil, we can use the formula:

[tex]Turns_{ratio} = (Voltage_{ratio})^{exponent}[/tex]

In this case, the voltage ratio is the ratio of the output voltage to the input voltage. The exponent is 1 since it's a D/C transformer. So, the equation becomes:

(120 VDC) / (10 VDC) = (1000 turns) / (x turns)

Solving for x, the number of turns in the secondary coil, we find:

x = (1000 turns) * (10 VDC) / (120 VDC)

x ≈ 83.33 turns

Therefore, approximately 83.33 turns are needed in the secondary coil to produce an output voltage of 10 VDC in this D/C transformer.

Learn more about voltage here:

https://brainly.com/question/13396105

#SPJ11

The complete question is:

D/C Transformer The input voltage to a transformer is 120 VDC to the primary coil of 1000 turns. What are the number of turns in the secondary needed to produce an output voltage of 10 VDC ?

The brick will sink in the fluid is true.

A brick with a mass of 10 kg and a volume of 0.01 m³ is submerged in a fluid that has a density of 800 kg/m³.

The density of an object is the ratio of mass to volume.

The mass of the brick is 10 kg and the volume is 0.01 m³.

So, the density of the brick is; Density = mass/volume = 10 kg/0.01 m³ = 1000 kg/m³

The density of the brick is 1000 kg/m³.

The density of the fluid is 800 kg/m³.

So, the brick will sink because the density of the brick is greater than the density of the fluid.

Learn more about sink: https://brainly.com/question/857846

#SPJ11

The correct answer is A) the component of gravity acting along the plane of the ramp has increased.

When an object sits on a ramp, its weight (which is the force due to gravity) can be resolved into two components: one perpendicular to the ramp (the normal force) and one parallel to the ramp. The parallel component of the weight, often referred to as the force of gravity acting along the ramp, determines the frictional force between the shoe and the ramp. For the shoe to remain at rest, the force of static friction between the shoe and the ramp must be equal to or greater than the parallel component of the weight. This static friction counteracts the tendency of the shoe to slide down the ramp.

As the angle of the ramp is increased, the ramp becomes steeper, and the angle between the ramp and the vertical direction increases. Consequently, the parallel component of the weight, which is responsible for the frictional force, increases. This increase in the parallel component of the weight provides a greater force to overcome static friction, allowing the shoe to start moving. Therefore, the shoe starts to move because the component of gravity acting along the plane of the ramp (parallel to the ramp) has increased.

Learn more about gravity here:

https://brainly.com/question/2888262

#SPJ11

The temperature of the sun's surface is 5778 K. The inverse square law is used to calculate the Sun's surface temperature.

The Stefan-Boltzmann constant is σ = 5.67 x 10-8 W/(m2K4)

The blackbody equation tells you how bright something is, given its temperature.

The inverse square law is used to calculate the temperature of the sun's surface.

The sun's brightness, at its surface, is [W/m2] = 6.34 x 107 W/m2.

We know that the Stefan-Boltzmann constant is given by σ = 5.67 x 10-8 W/(m2K4).

The formula for black body radiation is given by B(T) = σT4 where

T is the temperature of the black body.

Brightness is given by [W/m2] = 6.34 x 107 W/m2.

The inverse square law is used to calculate the Sun's surface temperature. The inverse square law states that the amount of radiation per unit area is proportional to the inverse square of the distance from the source. Let the temperature of the sun be T. The distance between the earth and the sun is approximately 1.496 x 1011 meters.

So, the brightness of the sun at the earth's distance is given by L/4π (1.496 x 1011) 2 = 6.34 x 107 W/m2

where L is the luminosity of the sun.

We know that L = 3.846 x 1026 W.

Substituting this value of L in the above equation, we get B = 6.34 x 107 W/m2.

Using the black body radiation equation, we can write B(T) = σT4.

Now, substituting the value of B in the above equation, we get 6.34 x 107 = σT4.

Thus, T4 = 6.34 x 107 / σ.

T4 = 6.34 x 107 / 5.67 x 10-8.

T4 = 1.12 x 1016.K4 - (T/5778)4.

The temperature of the sun is T = 5778 K.

The temperature of the sun's surface is 5778 K.

To know more about luminosity visit:

brainly.com/question/33171892

#SPJ11

A proton and a deuteron (a particle with the same charge as the proton, but with twice the mass) try to penetrate a barrier of rectangular potential of height 10 MeV and width 10⁻¹⁴ m. The two particles have kinetic energies of 3 MeV.

a) Qualitative prediction:

The potential energy barrier is quite high and very wide, which means that it is difficult for any of the two particles to penetrate the barrier. Since the deuteron has twice the mass of the proton, it will have a greater energy density. As a result, it will have a lower kinetic energy, which will make it less likely to overcome the barrier and penetrate it. As a result, a proton will have a greater probability of success when compared to a deuteron.  Hence, the proton has the highest probability of getting through the potential barrier.

b) Quantitative calculation:

For the calculation of the probability of success for each of the particles, the transmission coefficient is to be calculated. Transmission coefficient is the ratio of the probability of transmission of a particle to the probability of its incidence. We can calculate the transmission coefficient as follows:

L = e 2 4 π ε 0 Z E − R

By plugging the values in the above equation, we get approx 3.1 * 10^{-29} for proton and approx 8.5* 10^{-32} for deuteron

As we can see, the probability of success for the proton is much higher than that for the deuteron. Therefore, a proton has the highest probability of getting through the potential barrier.

Learn more about the proton: https://brainly.com/question/13683522

#SPJ11

U_1 = 0.2 m/s; u_max = 1 m/s; Pressure drop = 2.45 x 10^3 Pa.

Given,Width of the channel, w = 25 mmHeight of the channel, 2h = 100 mmQ = 0.025 m^3/sAt the entrance, we need to find the uniform velocity U_1. We know that,Q = U_1 x w x 2hQ = U_1 x 25 x 100/1000 = 0.025m^3/sU_1 = 0.1/25 = 0.004 m/sMaximum velocity occurs at y = 0.u_max = 1-( y/h )^2at y = 0, u_max = 1 m/s.

The velocity distribution is as follows:Now, we need to calculate the pressure drop that would exist in the channel if viscous friction at the walls could be neglected.We know that in case of ideal flow i.e. in the absence of frictional forces, Bernoulli’s equation holds good.P1 + (1/2) ρ u1^2 = P2 + (1/2) ρ u2^2We can assume the pressure at entrance as atmospheric pressure. Therefore, P1 = PatmThe velocity at the entrance is U_1 = 0.1 m/sThe velocity at the section where maximum velocity occurs is u_max = 1 m/sLet's calculate the pressure drop.ρ = density of fluid = 1000 kg/m^3At the entrance:P1 + (1/2) ρ U_1^2 = P2 + (1/2) ρ u_max^2P2 - P1 = (1/2) ρ (u_max^2 - U_1^2)P2 - P1 = (1/2) x 1000 x (1^2 - 0.004^2)Pressure drop = 2.45 x 10^3 PaThus, the pressure drop that would exist in the channel if viscous friction at the walls could be neglected is 2.45 x 10^3 Pa.

To know more about velocity visit:

https://brainly.com/question/16201327

#SPJ11

a. the angular acceleration in rad/s² of the cooling fan is -16.16 rad/s². Hence, the correct option is -16.16 rad/s².

b. the volume of the iron object is 0.35 cm³. Thus, the correct option is 0.35.

a. The angular acceleration in rad/s² of the cooling fan that has been turned off when running at 9.2 rad/s and it turns 25 rad before it comes to a stop can be calculated using the formula shown below:

ωf = 0rad/s;

ωi = 9.2rad/s;

θ = 25 rad(ωf)² = (ωi)² + 2αθ

α = (ωf² - ωi²)/2θ

α = ((0)² - (9.2)²)/2(25)

α = -16.16 rad/s²

b. The volume of an iron object of density 7.80g/cm appears 27 N lighter in water than in air can be calculated using the formula shown below:

Buoyant force = mg

Apparent weight in water = Weight in air - Buoyant force

Therefore, 27 = mg - ρVg

27 = g(m - ρV)

V = (m - ρV) / ρV = (m / ρ) - 1

V = (27 / 9.8 x 7.80) - 1

V = 0.35 cm³

To learn more about angular acceleration, refer:-

https://brainly.com/question/1980605

#SPJ11