Answer:
15 + 3m + 4x + 8d
Explanation:
You serve a volleyball with a mass of 2100 g. the ball leaves your hand with a velocity of 30 m/s. the ball has kinetic
energy.
The volleyball with a mass of 2100 g and a velocity of 30 m/s will have a kinetic energy of 945 Joules.
1. Mass: It refers to the amount of matter in an object. In this case, the volleyball has a mass of 2100 g, which we need to convert to kg (1 kg = 1000 g), so the mass is 2.1 kg.
2. Velocity: It is the rate of change of an object's position, including both speed and direction. In this example, the velocity of the volleyball is 30 m/s.
3. Kinetic Energy: It is the energy an object possesses due to its motion. To calculate the kinetic energy of an object, we can use the formula: KE = (1/2)mv², where KE is kinetic energy, m is mass, and v is velocity.
To calculate the kinetic energy of the volleyball:
1. Convert the mass of the volleyball to kg.
Mass = 2100 g = 2100/1000 kg = 2.1 kg
2. Use the given velocity of the volleyball.
Velocity = 30 m/s
3. Apply the kinetic energy formula.
KE = (1/2)mv²
KE = (1/2)(2.1 kg)(30 m/s)²
4. Calculate the kinetic energy.
KE = 0.5 * 2.1 kg * (900 m^2/s²) = 945 J (Joules)
In conclusion, the volleyball you serve with a mass of 2100 g and a velocity of 30 m/s has a kinetic energy of 945 Joules.
Learn more about velocity at: https://brainly.com/question/10425898
#SPJ11
To work a ball of dough with the fingertips or heels of the hands by repeating press, fold, and turn motions is to
To work a ball of dough with the fingertips or heels of the hands by repeating press, fold, and turn motions is to knead the dough.
This process helps develop the gluten in the dough, resulting in a smooth and elastic texture.
Here's a more detailed explanation of the kneading process and its effects on the dough:
Gluten Development: Gluten is a network of proteins found in wheat flour. When the dough is kneaded, the proteins in the flour, called glutenin and gliadin, combine and form gluten strands.
Kneading promotes the alignment and cross-linking of these protein strands, creating a network that gives the dough its structure and elasticity.
Incorporation of Air: During the kneading process, air is also incorporated into the dough. The repeated folding and pressing motions trap air bubbles within the dough, contributing to its light and airy texture once baked.
Hydration and Consistency: Kneading helps distribute moisture evenly throughout the dough. This ensures that all the flour particles are hydrated, resulting in a consistent texture and flavor.
It also helps to achieve the desired consistency of the dough, adjusting it from a sticky or shaggy state to a smooth and workable one.
Activation of Yeast: Kneading provides mechanical action that activates the yeast present in the dough. Yeast is a microorganism that ferments the sugars in the dough, producing carbon dioxide gas.
Kneading helps distribute the yeast evenly, promoting fermentation and allowing the dough to rise.
Development of Flavor: Kneading also impacts the flavor of the dough. As the dough is worked, enzymes naturally present in the flour are activated, converting starches to sugars.
These sugars then undergo fermentation by yeast, resulting in the release of various flavorful compounds that contribute to the overall taste of the final baked product.
To learn more about yeast, refer below:
https://brainly.com/question/28884452
#SPJ11
Judy shakes one end of a spring up and down with her hand to produce a wave. if she doubles the frequency at which she oscillates the spring, the wavelength in the spring will
a: not change
b: double
c: quadruple
d: halve
The correct answer is: (d) i.e. halve
If Judy doubles the frequency at which she oscillates the spring, the wavelength in the spring will halve. This is because the wavelength of a wave is inversely proportional to its frequency, meaning that as the frequency doubles, the wavelength must halve in order to maintain a constant wave speed.
Wavelength and frequency are related by the relation
L = v/f
where L= Wavelength
v = speed of the wave
f = frequency and therefore wavelength is inversely proportional to the frequency of the wave and when frequency doubles, wavelength must be halved.
Visit https://brainly.com/question/13533093 to learn more about wavelength
#SPJ11
Gravitational force between two bodies is 5N When they are placed at the distance of 1om.. How much gravitational force will be produced if they are kept at the distance of 20m.
Answer:
F = 1.25 N
Explanation:
The equation to calculate Gravitational Force is
F = G (m1 . m2) / r^2
where G is gravitational constant, m1 and m2 are the mass of the 2 objects.
So, assuming that the G, m1, m2 is constant, the equation will be
F1 . [tex]r1^{2}[/tex]= F2 . [tex]r2^{2}[/tex]
Therefore,
F2 = F1 . [tex]r1^{2}[/tex] / [tex]r2^{2}[/tex]
And finally we just need to find F2 by inserting this value
F1 = 5N
r1 = 10m
r2 = 20m
I hope you can understand, let me know if you need more explanation.
An object of mass 20 g is moving in a horizontal circle of radius 250 cm at a speed of 50 cm/s. What is the centripetal acceleration experienced by the object?
The centripetal acceleration experienced by an object moving in a circle is given by the formula:
a = v²/r
where a is the centripetal acceleration, v is the speed of the object, and r is the radius of the circle.
In this problem, we are given that the object has a mass of 20 g, which we need to convert to kilograms:
m = 20 g = 0.02 kg
We are also given that the object is moving in a horizontal circle of radius 250 cm at a speed of 50 cm/s. We need to convert these measurements to SI units (meters and seconds) to use the formula for centripetal acceleration:
r = 250 cm = 2.5 m
v = 50 cm/s = 0.5 m/s
Now we can calculate the centripetal acceleration:
a = v²/r = (0.5 m/s)² / 2.5 m = 0.1 m/s²
Therefore, the centripetal acceleration experienced by the object is 0.1 m/s².
Part b
perform the experiment by following these directions:
step 1
using the sticky notes, label the thermometers t1 and t2. make sure that both thermometers are at room temperature (around 21°c). then, in the table, record their temperatures and the time of this initial measurement.
step 2
place 1 tablespoon of baking soda in a small glass or jar. carefully add one-fourth cup of white vinegar. when the mixture starts to bubble or fizz, place the first thermometer (t1) near (not in!) the glass. then cover the glass and the thermometer with one of the upside-down soda bottles. if the thermometer cannot stand vertically on its own or it is too large to lay horizontally within the soda bottle, it can lean against an inner side of the soda bottle.
step 3
immediately place the other soda bottle upside down over the second thermometer (t2). place each bottle approximately 4 to 5 inches apart under the lamp or other heat source. turn on the lamp to expose each bottle to heat. the lamp or heat source represents the radiant energy that earth receives from the sun. the gases inside the bottles represent two different atmospheric compositions. determine how the amount of radiant energy absorbed by each atmosphere changes by tracking the temperature in the table.
(left) a thermometer and beaker be(left) a thermometer and beaker beneath an inverted pop bottle; (right) alone thermometer beneath an inverted pop bottle; a single sunlamp shines on both bottles
step 4
in the table, record the temperature of each thermometer every 2 minutes for the first 10 minutes. then record the temperature every 5 minutes for the next 20 minutes (30 minutes total). if the temperature exceeds your thermometer rating, move the lamp farther away and repeat this step.
The experiment involves comparing the temperatures of two thermometers placed in different atmospheric compositions and exposed to radiant energy. The goal is to track the amount of radiant energy absorbed by each atmosphere over a period of 30 minutes.
Part B of the experiment involves performing the actual experiment by following the given directions.:
The experiment involves setting up two thermometers, t1 and t2, and placing them in separate soda bottles containing different atmospheric compositions. One bottle will contain a mixture of baking soda and white vinegar, while the other bottle will be left empty. Both bottles will be placed under a lamp or other heat source to represent the radiant energy that Earth receives from the sun. The experiment will measure the amount of radiant energy absorbed by each atmosphere by tracking the temperature changes in the two thermometers. The temperatures will be recorded in a table every 2 minutes for the first 10 minutes and then every 5 minutes for the next 20 minutes, with a total duration of 30 minutes. If the temperature exceeds the thermometer rating, the lamp will be moved farther away, and the step will be repeated.To know more about the Thermometer, here
https://brainly.com/question/8823320
#SPJ4
Bumper cars are a fairground ride and are designed to bump into each other. Two bumper cars moving towards each other.
1. )Give two factors that affect the momentum of each bumper car. [2marks]
2. )The bumper cars crash into each other and stop.
Explain why both bumper cars stop after the crash. [4marks]
Bumper cars are a popular ride at fairs and amusement parks, designed for riders to bump into each other while driving around. When two bumper cars move towards each other, there are two factors that affect the momentum of each car.
The first factor is the mass of the car. The heavier the car, the more momentum it has. So, a heavier bumper car will be harder to stop and will have more force when it hits another car. The second factor is the speed of the car. The faster a car is moving, the more momentum it has.
Therefore, if two cars are moving at the same speed, they will have equal momentum. However, if one car is moving faster than the other, it will have more momentum and cause a greater impact when it collides.
When two bumper cars crash into each other, both cars come to a stop. This is due to the law of conservation of momentum. This law states that in a closed system, the total momentum before a collision is equal to the total momentum after the collision.
In this case, the two bumper cars collide and their momentum is transferred to each other, causing both cars to come to a stop.
When the cars collide, the force of the impact causes the cars to stop. The cars' kinetic energy is transferred to other forms of energy, such as heat and sound.
Additionally, the cars' bumpers are designed to absorb some of the impact, which also helps to slow the cars down and prevent injury to the riders.
In conclusion, the momentum of a bumper car is affected by its mass and speed. When two cars collide, they come to a stop due to the law of conservation of momentum. The force of the impact and the design of the bumpers also play a role in the cars' deceleration.
To know more about momentum refer here
https://brainly.com/question/30677308#
#SPJ11
You hold a meter stick at one end with the same mass suspended at the opposite end. Rank the torque needed to keep the stick steady, from largest to smallest
The torque needed to keep the stick steady, ranked from largest to smallest, would be: highest when the suspended mass is at the far end of the stick, lower when the suspended mass is closer to the pivot point, and lowest when the suspended mass is at the pivot point itself.
To rank the torque needed to keep the stick steady from largest to smallest, we need to consider the factors that affect torque.
Torque is the rotational equivalent of force, and it depends on the distance between the pivot point (the end of the meter stick you are holding) and the point where the force is applied (the suspended mass), as well as the magnitude of the force.
In this scenario, the torque needed to keep the stick steady will be highest when the suspended mass is at the far end of the stick, i.e. as far away from the pivot point as possible.
This is because the greater the distance between the pivot point and the force, the more torque is required to counteract the force's rotational effect. Therefore, the torque needed to keep the stick steady will be highest when the suspended mass is at the end of the meter stick farthest away from the pivot point.
Conversely, the torque needed to keep the stick steady will be lowest when the suspended mass is at the pivot point itself, as there is no rotational effect to counteract in this scenario.
Therefore, the torque needed to keep the stick steady will be lowest when the suspended mass is at the end of the meter stick closest to the pivot point.
To know more about torque refer here
https://brainly.com/question/25708791#
#SPJ11
The radium isotope 223Ra, an alpha emitter, has a half-life of 11. 43 days. You happen to have a 1. 0 g cube of 223Ra, so you decide to use it to boil water for tea. You fill a well-insulated container with 460 mL of water at 16∘ and drop in the cube of radium.
How long will it take the water to boil?
Express your answer with the appropriate units
It will take approximately 6.89 × 10^-5 seconds (or 68.9 microseconds) for the water to boil.
To determine how long it will take for the water to boil, we need to consider the decay of the radium isotope and calculate the time it takes for the heat released from the radioactive decay to raise the temperature of the water to its boiling point.
First, let's calculate the number of radium atoms in the 1.0 g cube of 223Ra. To do this, we'll use the molar mass of radium-223 (223 g/mol) and Avogadro's number (6.022 × 10^23 atoms/mol):
Number of radium atoms = (1.0 g) / (223 g/mol) × (6.022 × 10^23 atoms/mol)
= 2.69 × 10^21 atoms
Each radium-223 atom decays by emitting an alpha particle (helium nucleus) and transforms into a different element over time. The energy released during this decay process contributes to heating the surrounding environment.
Now, we need to calculate the total energy released by the decay of the 2.69 × 10^21 radium atoms. The energy released per decay of radium-223 is approximately 5.69 MeV (million electron volts).
Total energy released = (2.69 × 10^21 atoms) × (5.69 MeV/atom) × (1.6 × 10^-13 J/MeV)
= 2.44 × 10^9 J
Next, we need to calculate the specific heat capacity of water. The specific heat capacity of water is approximately 4.18 J/g⋅°C.
To raise the temperature of the water from 16°C to its boiling point, we need to calculate the amount of heat required:
Heat required = (460 mL) × (1 g/mL) × (4.18 J/g⋅°C) × (100°C - 16°C)
= 1.68 × 10^5 J
Now, we can determine the time required for the water to reach its boiling point. We divide the heat required by the total energy released per second:
Time required = (1.68 × 10^5 J) / (2.44 × 10^9 J/s)
≈ 6.89 × 10^-5 s
Therefore, it will take approximately 6.89 × 10^-5 seconds (or 68.9 microseconds) for the water to boil.
To learn more about isotope, refer below:
https://brainly.com/question/11680817
#SPJ11
Can people get the flu from a flu vaccine explain your answer
When training for muscular endurance, how should the athlete alter the number of repetitions he or she performs in an
exercise?
O More reps should be executed.
O Fewer reps should be executed.
O Raising or lowering the number should depend on the exercise and goals.
O The number of reps should not be changed.
1. A person sits beside a highway when a car traveling toward the observer at 35. 0 m/s blows its horn with a frequency of 320 Hz. What frequency of sound does the observer hear when (a) the car is approaching? (b) the car is right next to him? (c) the car is moving away?
The observer hears a frequency of 374 Hz when the car is approaching and 293 Hz when it is moving away.
The frequency of sound heard by an observer is affected by the motion of the source of the sound relative to the observer. This effect is known as the Doppler effect. The Doppler effect can be described by the equation: f' = f (v±vo)/(v±vs)
where f is the frequency of the sound emitted by the source, v is the speed of sound, vo is the speed of the observer, and vs is the speed of the source. The ± sign is positive when the source is moving toward the observer and negative when it is moving away.
(a) When the car is approaching, the frequency of sound heard by the observer is higher than the frequency emitted by the car. Applying the Doppler effect equation, we get: f' = f (v+vo)/(v+vs), f' = 320 Hz (343 m/s + 0)/(343 m/s - 35.0 m/s), f' = 374 Hz
(b) When the car is right next to the observer, the frequency of sound heard by the observer is the same as the frequency emitted by the car. This is because there is no relative motion between the observer and the source.
(c) When the car is moving away, the frequency of sound heard by the observer is lower than the frequency emitted by the car. Applying the Doppler effect equation, we get:
f' = f (v-vo)/(v-vs)
f' = 320 Hz (343 m/s - 0)/(343 m/s - 35.0 m/s)
f' = 293 Hz
Therefore, the observer hears a frequency of 374 Hz when the car is approaching and 293 Hz when it is moving away.
To know more about Doppler effect, refer here:
https://brainly.com/question/28106478#
#SPJ11
The 300-series Shinkansen trains consist of 16 aluminum cars with a combined mass of 7. 10 X 105 kg. The reduction in mass from the 100-
series enables the 300-series trains to reach top speed of 270 km/h. What is the momentum of one of these trains at its top speed? Is the
momentum of a 300-series train greater or less than the momentum of a 100-series train traveling at its top speed?
The momentum of one 300-series Shinkansen train at its top speed of 270 km/h is 1.93 x[tex]10^{8}[/tex] kg*m/s.
Whast is Mass?
Mass is a fundamental physical property of matter that quantifies the amount of matter in an object. It is a scalar quantity that measures the resistance of an object to a change in its motion or acceleration, and is typically measured in units of kilograms (kg) in the International System of Units (SI).
The momentum (p) of an object can be calculated using the formula p = mv, where m is the mass of the object and v is its velocity. The mass of the 300-series Shinkansen train is given as 7.10 x [tex]10^{5}[/tex] kg. To calculate its momentum, we need to convert the velocity of 270 km/h to m/s. 270 km/h is equivalent to 75 m/s. Therefore, the momentum of one 300-series Shinkansen train at its top speed is:
p = mv = 7.10 x [tex]10^{5}[/tex] kg x 75 m/s = 1.93 x [tex]10^{8}[/tex] kg*m/s
Learn more about Mass from the given link
https://brainly.com/question/86444
#SPJ4
Two forces, both in the x-y plane, act on a 3.25-kg mass that accelerates at 5.48 m/s2 in a direction 38.0∘ counterclockwise from the x-axis. one force has a magnitude of 8.63 n and points in the +x-direction.
part a
find the other force as x- and y-components.
fx,fy = ? n
please help!
The other force acting on the mass has x- and y-components of 5.27 N and 11.4 N respectively.
What is force?Force is the action of one body on another body, which causes it to accelerate, deform, or change direction. It is a vector quantity, meaning it has both magnitude and direction. Forces can be either contact forces, such as friction, or non-contact forces, such as gravity, electric and magnetic forces.
The acceleration of the mass can be broken down into its x- and y-components.
The x-component of the acceleration is:
ax = 5.48 cos(38.0°) = 4.28 m/s2
The y-component of the acceleration is:
ay = 5.48 sin(38.0°) = 3.51 m/s2
The x-component of the force is known and is given as 8.63 N.
The net force acting on the mass can be calculated using the equation:
Fnet = ma
The net force in the x-direction is:
Fnetx = m * ax = 3.25 * 4.28 = 13.9 N
The net force in the y-direction is:
Fnety = m * ay = 3.25 * 3.51 = 11.4 N
The remaining force in the x-direction is:
Fx = Fnetx - 8.63 = 13.9 - 8.63 = 5.27 N
The remaining force in the y-direction is:
Fy = Fnety = 11.4 N
Therefore, the other force acting on the mass has x- and y-components of 5.27 N and 11.4 N respectively.
To learn more about force
https://brainly.com/question/12970081
#SPJ4
A uniform, 6 m long and 600-N beam, rests on two supports, as shown. The force exerted onthe b eam by the right support B is closest to:
The force exerted on the beam by the right support B is closest to: (B).320N is correct option.
If the beam is at rest, the sum of the forces and the sum of the torques acting on it must be equal to zero.
Assuming the beam is supported at its two ends, the sum of the forces acting on the beam will be equal to the weight of the beam, which is given by:
W = m * g
W = (600 N) / (9.81 m/s²) ≈ 61.14 kg
Each support will exert an equal and opposite force on the beam, which we can denote as F. Therefore, the sum of the forces acting on the beam will be:
ΣF = 2F - W = 0
Solving for F, we get:
F = W/2
F ≈ 30.57 kg ≈ 300 N
Therefore, the force exerted on the beam by the right support B is closest to 300 N.
The complete question is,
A uniform 400-N beam 6 m long rests on two supports. Support Ais im from the left end of the beam Support B is at the right end of the beam. What is the value in N. of support force exerted on the beam by the left support A? 400 0 320 240 O 160
To know more about beam
https://brainly.com/question/29825179
#SPJ1
The principle of superposition can be used to determine:.
The principle of superposition can be used to determine the net effect of multiple individual effects on a physical system. It is a fundamental principle in physics and is used to analyze the behavior of waves, electric and magnetic fields, and other physical phenomena.
In essence, the principle of superposition states that when two or more waves, forces, or fields interact with each other, the net effect is the sum of the individual effects of each wave, force, or field.
This principle applies to both linear and nonlinear systems, and it is a crucial tool for understanding complex physical systems.
For example, the principle of superposition can be used to determine the resulting wave pattern when two or more waves of different frequencies, amplitudes, and directions interact with each other. It can also be used to calculate the net electric or magnetic field at a given point in space due to multiple charges or currents.
To know more about principle of superposition refer here
https://brainly.com/question/11876333#
#SPJ11
15. true or false convection drives movement of the tectonic plates which does not involve subduction.
The given statement "convection drives movement of the tectonic plates which does not involve subduction" is false because tectonic plate movement caused by mantle convection involves subduction.
Convection plays a crucial role in driving the movement of tectonic plates, which includes subduction. The Earth's mantle is divided into several convection cells that transfer heat and matter from the interior of the Earth towards the surface.
As the hotter material rises towards the surface, it displaces colder and denser material, which sinks back down into the interior. This convection cycle causes the movement of tectonic plates, as the plates are essentially riding on top of the flowing mantle.
Subduction occurs when one tectonic plate is forced beneath another due to differences in density and temperature. This process is driven by the movement of the plates themselves, which in turn is driven by the underlying convection currents in the mantle.
In summary, the movement of tectonic plates is driven by convection currents in the mantle, and subduction is one of the important processes involved in this movement.
To know more about tectonic refer here:
https://brainly.com/question/31796227#
#SPJ11
Two charged spheres placed 43 cm apart exert a force of 1. 40 10-14 N on
each other. If one of the spheres has a charge of 1. 68 x 10-17 C, what is the
charge of the other sphere?
The charge of the other sphere is approximately 5.70 x 10^-17 C.)
To find the charge of the other sphere, we can use Coulomb's law, which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. In this case, we have:
F = k * (q1 * q2) / r^2
where F is the force between the spheres, k is Coulomb's constant, q1 is the charge of one sphere, q2 is the charge of the other sphere, and r is the distance between the spheres.
We are given F, q1, and r, and we can look up the value of k (which is approximately 9 x 10^9 N m^2/C^2). Rearranging the equation, we get:
q2 = (F * r^2) / (k * q1)
Plugging in the values, we get:
q2 = (1.40 x 10^-14 N * (0.43 m)^2) / (9 x 10^9 N m^2/C^2 * 1.68 x 10^-17 C)
q2 = 5.70 x 10^-17 C
To know more about Coulomb's law refer here
https://brainly.com/question/28040775#
#SPJ11
A cat runs along a straight line (the x-axis) from point A to point B to point C, as shown in the figure. The distance between points A and C is 5. 00 m, the distance between points B and C is 10. 0 m, and the positive direction of the x-axis points to the right. The time to run from A to B is 20. 0 s, and the time from B to C is 8. 00 s. As the cat runs along the x-axis between points A and C what is its average speed?
To find the average speed of the cat, we need to use the formula:
Average speed = total distance ÷ total time
From the given information, we know that the total distance the cat runs is 5.00 m + 10.0 m = 15.0 m. The total time taken by the cat to run this distance is 20.0 s + 8.00 s = 28.0 s. Substituting these values in the formula, we get:
Average speed = 15.0 m ÷ 28.0 s
Average speed = 0.536 m/s (rounded to three significant figures)
Therefore, the average speed of the cat as it runs along the x-axis from points A to C is 0.536 m/s.
It's important to note that average speed only considers the total distance covered and the total time taken, regardless of any changes in direction or speed during the journey. In this case, the cat runs along a straight line, so its speed and direction remain constant.
Also, we can observe that the cat runs faster from point A to point B (20.0 s) than from point B to point C (8.00 s). However, the average speed takes into account the entire distance covered, so the slower speed over a longer distance from B to C brings down the average speed.
In conclusion, the cat's average speed on a straight line from points A to C is 0.536 m/s.
To know more about average refer here
https://brainly.com/question/24057012#
#SPJ11
some comon salt was put into a flask. Water was then added carefully using a pipette without shaking the salt. After shaking, the volume of the solution reduced. Explain the observation
The observed reduction in the volume of the salt solution after shaking suggests that the added water was able to dissolve the salt, resulting in a more compact solution.
A solution is a homogeneous mixture made up of two or more substances that are evenly distributed at a molecular or ionic level. The substance that is present in the largest amount is called the solvent, and the substances that are dissolved in it are called solutes. The solutes can be gases, liquids, or solids.
The process of forming a solution involves the solute particles being surrounded by the solvent particles, which causes the solute particles to become evenly distributed throughout the solvent. The attractive forces between the solvent and solute molecules or ions play a crucial role in determining the concentration of the solution.
Solutions can have a wide range of properties, such as color, density, boiling and melting points, and electrical conductivity, which depend on the identity of the solutes and the solvent. Solutions are an essential part of many chemical, biological, and industrial processes, and understanding their properties and behavior is crucial in many fields of science and technology.
Here in this Question, When salt is added to water, it dissolves to form a saltwater solution. However, the addition of more water than the solubility of salt causes some of the salt to remain undissolved at the bottom of the flask. When the flask is shaken, the salt particles that were initially undissolved become suspended in the solution due to the agitation, thereby reducing the volume of the solution. This is because the suspended particles take up space in the solution, which was initially occupied by the water molecules.
Therefore, The observed decrease in salt solution volume after shaking indicates that the salt was able to dissolve in the additional water, resulting in a more compact solution.
To learn more about the type of solution click:
https://brainly.com/question/30239692
#SPJ1
Q1) The molar specific heat of a diatomic gas is measured at constant volume and found to be 29. 1 J/mol. K. The types of energy that are contributing to the molar specific heat are: (a) translation only (b) translation and rotation only (c) translation and vibration only (d) translation, rotation, and vibration. And why?
The molar specific heat of a diatomic gas measured at constant volume and found to be 29.1 J/mol·K indicates that the types of energy contributing to the molar specific heat are: (b) translation and rotation only.
This is because diatomic molecules have 5 degrees of freedom: 3 translational and 2 rotational. The molar specific heat at constant volume (Cv) can be calculated using the formula Cv = (f/2)R, where f is the degrees of freedom and R is the gas constant (8.314 J/mol·K).
For diatomic molecules with 5 degrees of freedom, Cv = (5/2)R = 20.785 J/mol·K. However, given the value of 29.1 J/mol·K, it is close to the expected value of (7/2)R = 29.09 J/mol·K, which represents the 3 translational and 2 rotational degrees of freedom without including vibrational energy.
Thus, only translation and rotation are contributing to the molar specific heat in this case.
To learn more about energy, refer below:
https://brainly.com/question/1932868
#SPJ11
What is the first step necessary to allow calculation of voltages in a combination circuit containing resistive loads in series and parallel?
The first step necessary to allow calculation of voltages in a combination circuit containing resistive loads in series and parallel is to simplify the circuit using Ohm's law and Kirchhoff's laws.
This involves identifying the resistors in series and parallel, and then using the appropriate circuit laws to calculate the total resistance of the circuit.
Once the total resistance is calculated, the current flowing through the circuit can be found using Ohm's law.
From there, the voltage drop across each resistor can be calculated using the current and the resistance.
By combining the voltage drops across the resistors, the total voltage of the circuit can be found.
To know more about Kirchhoff's laws, refer here:
https://brainly.com/question/30400751#
#SPJ11
What is the sign of the charge in this figure? a)positive b)You cannot tell from the information given. c) negative d) neutral
Answer:
Explanation:
C
In charging by induction, a charged object is brought near an object without touching it. The presence of the charge object induces electron movement and a polarization of the object. Then conducting pathway to ground is established and electron movement occurs between the object and the ground. During the process, the charged object is never touched to the object being charged.
An echo bounces off the side of a mountain which is 290 m away from a hiker who yells at the mountain. If the hiker hears the echo 1.7 s after yelling, how fast was the sound wave traveling?
The sound wave moved at a speed of about 170.59 m/s.
Do you consider an echo to be a type of sound?Echoes. An echo is a sound that is reproduced when sound waves are reflected back. Sound waves can also reflect off smooth, hard surfaces, much to way a rubber ball does. The echo sounds the same as the original sound, despite the fact that the sound's direction changes.
Time for sound to reach the mountain and bounce back = 2 x 1.7 s = 3.4 s
The distance traveled by the sound wave is twice the distance between the hiker and the mountain, so:
Distance = (580 m x 2 x 290 m)
Using the formula:
Speed = Distance / Time
we get:
Speed = 580 m / 3.4 s = 170.59 m/s
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ1
Think of the balloon and sweater. For one object (like the balloon) to become negative it means another object (like the sweater) must become equally what?
friction
induction
conduction
Answer:
According to the only context given, the correct answer is induction.
The best measurements of the mass of the black hole at the galactic center come from:.
The best measurements of the mass of the black hole at the center of the Milky Way galaxy come from observations of the orbits of stars and gas clouds near the galactic center.
In particular, astronomers have been able to observe the motion of stars and gas clouds that are very close to the center of the galaxy, within a few light-days of the suspected black hole.
By measuring the speed and direction of these objects, and analyzing their orbital trajectories, scientists can calculate the gravitational force required to keep them in orbit. The size of this force depends on the mass of the central object, which is likely to be a black hole.
Through this method, astronomers have estimated that the black hole at the center of the Milky Way, known as Sagittarius A*, has a mass of about 4 million times that of the sun.
This estimate has been refined and confirmed over several years of observations, and is currently the most accurate measurement of the mass of a supermassive black hole.
To know more about black hole refer here
https://brainly.com/question/10597324#
#SPJ11
Question 1 (2 points)
Cross training is a type of training routine that combines two or more different
exercises into a workout to prevent injuries, burnout, and overuse.
True
False
A person's strength, speed, power, agility, flexibility, and endurance are all increased with cross training, which also helps to reduce the chance of injury.
What is the cross-training training method?Cross-training is the technique of preparing employees to perform duties that go outside of their typical responsibilities or to work in multiple different jobs. For instance, cross-training could be used to teach someone who works in collections how to work in billing, and the other way around.
What effect does cross-training have?This is based on the finding that strengthening one limb while exercising the opposite limb results in a phenomena known as cross-training, also known as the contralateral strength training effect.
To know more about endurance visit:-
brainly.com/question/29792091
#SPJ1
True. Cross training is a type of training routine that combines two or more different exercises into a workout to prevent injuries, burnout, and overuse.
What is the cross-training training method?
Cross-training is the technique of preparing employees to perform duties that go outside of their typical responsibilities or to work in multiple different jobs. For instance, cross-training could be used to teach someone who works in collections how to work in billing, and the other way around.
A piece of cardio training equipment is a cross trainer, commonly referred to as an elliptical trainer. It is a fantastic full-body exercise and works your arms and legs at the same time. Cross training and a cross trainer are very different from one another, however a cross trainer can play a significant role in a cross training regimen.
To learn more about Cross-training use:
https://brainly.com/question/9866607
#SPJ1
Choose which has more gravitational energy
odiver with a mass of 450 n diving from a height of 20 feet
diver has a mass of 400 n standing at a height of 20 feet
diver with a mass of 450 n standing at a height of 20 feet
Based on the given information, the diver with a mass of 450 N standing at a height of 20 feet has more gravitational potential energy.
Gravitational potential energy can be calculated using the formula: PE = mgh, where PE represents potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.
In this case, the diver with a mass of 450 N at a height of 20 feet has a greater mass, resulting in a higher gravitational potential energy compared to the diver with a mass of 400 N at the same height.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
A copper wire of length 10m and radius 1mm is extended by 1.5mm when subjected to a tension of 200N calculate the energy density of the wire.
Answer:
Explanation:
To calculate the energy density of the wire, we need to first calculate the strain energy stored in the wire.
The strain energy stored in the wire can be calculated using the formula:
U = (1/2) * F * deltaL
where U is the strain energy, F is the applied force, and deltaL is the change in length of the wire.
Here, the applied force is 200 N, and the change in length of the wire is 1.5 mm = 0.0015 m.
So, the strain energy stored in the wire is:
U = (1/2) * 200 N * 0.0015 m = 0.15 J
Now, we need to calculate the volume of the wire to determine the energy density.
The volume of the wire can be calculated using the formula for the volume of a cylinder:
V = pi * r^2 * L
where V is the volume, r is the radius, and L is the length of the wire.
Here, the radius of the wire is 1 mm = 0.001 m, and the length of the wire is 10 m.
So, the volume of the wire is:
V = pi * (0.001 m)^2 * 10 m = 7.853 x 10^-6 m^3
Finally, we can calculate the energy density of the wire using the formula:
Energy density = Strain energy / Volume
Energy density = 0.15 J / 7.853 x 10^-6 m^3
Energy density = 19,102,077.34 J/m^3
Therefore, the energy density of the copper wire is 19,102,077.34 J/m^3.
PLS MARK ME BRAINLIEST
How do saturn’s shepherd moons help maintain the stability of saturn’s rings?.
Saturn's shepherd moons are small, icy moons that orbit the planet near its rings. The shepherd moons help maintain the stability of Saturn's rings by exerting a gravitational tug on the particles that constitute the rings.
This creates a gravitational force that counteracts the disruptive force of the particles' collisions with each other, keeping them in place instead of allowing them to spread out or collapse.
Additionally, the shepherd moons help to keep the rings confined within a certain distance from Saturn. The shepherd moons also help to keep the rings from becoming too thin by helping to keep the particles in the rings in a more compacted formation. The shepherd moons of Saturn are thus crucial for the stability of the planet's rings.
Know more about Saturn's shepherd moons here
https://brainly.com/question/13210144#
#SPJ11