It is appropriate to take a pulse by counting the heart rate for 30 seconds and multiplying by two when a rapid or irregular pulse is suspected, or when it is difficult to count the pulse for a full minute.
Counting the heart rate for a full minute is the most accurate way to determine the heart rate. However, there are situations when it may be more appropriate to count the heart rate for 30 seconds and multiply by two.
For example, if a person's pulse is rapid or irregular, it may be difficult to accurately count the pulse for a full minute. In such cases, it may be more appropriate to count the pulse for 30 seconds and multiply by two to get an estimate of the heart rate.
Another situation where it may be appropriate to count the pulse for 30 seconds is when time is limited, such as in an emergency situation. In such cases, counting the pulse for 30 seconds and multiplying by two can provide a quick estimate of the heart rate.
However, it is important to note that counting the pulse for 30 seconds and multiplying by two may not be as accurate as counting the pulse for a full minute.
Therefore, if possible, it is recommended to count the pulse for a full minute to obtain the most accurate measurement of the heart rate.
To know more about pulse refer here:
https://brainly.com/question/30336643#
#SPJ11
1. Mr. Park pays $1000 per month in rent.
Before depositing his paycheck, his checking
account balance was $359.47. After the
deposit, it was $1441.33. Will Mr. Park have
enough money to pay his rent?
Answer:
Mr Park has enough money to pay his rent.
Step-by-step explanation:
The amount of the monthly rent paid = $1000
The account balance after depositing the paycheck = $1441.33
Now, to pay the rent,account should have more than the rent money $1000
Also, $1441.33 > $1000
⇒ The amount in the bank after depositing the paycheck > The rent to be paid
Hence, Mr Park has enough money to pay his rent.
The function f(x) is defined as f(x) = One-third(6)x. Which table of values could be used to graph g(x), a reflection of f(x) across the x-axis? A 3-column table has 5 rows. The first column is labeled x with entries negative 2, negative 1, 0, 1, 2. The second column is labeled f (x) with entries StartFraction 1 Over 108 EndFraction, One-eighteenth, one-third, 2, 12. The third column is labeled g (x) with entries 12, 2, one-third, one-eighteenth, StartFraction 1 Over 108 EndFraction. A 3-column table has 5 rows. The first column is labeled x with entries negative 2, negative 1, 0, 1, 2. The second column is labeled f (x) with entries StartFraction 1 Over 108 EndFraction, One-eighteenth, 0, 2, 12. The third column is labeled g (x) with entries 12, 2, 0, one-eighteenth, StartFraction 1 Over 108 EndFraction. A 3-column table has 5 rows. The first column is labeled x with entries negative 2, negative 1, 0, 1, 2. The second column is labeled f (x) with entries StartFraction 1 Over 108 EndFraction, One-eighteenth, one-third, 2, 12. The third column is labeled g (x) with entries negative StartFraction 1 Over 108 EndFraction, negative one-eighteenth, negative one-third, negative 2, negative 12. A 3-column table has 5 rows. The first column is labeled x with entries negative 2, negative 1, 0, 1, 2. The second column is labeled f (x) with entries StartFraction 1 Over 108 EndFraction, One-eighteenth, 0, 2, 12. The third column is labeled g (x) with entries negative StartFraction 1 Over 108 EndFraction, negative one-eighteenth, negative one-third, negative 2, negative 12.
Answer:
The correct table of values that could be used to graph g(x), a reflection of f(x) across the x-axis, is:
x f(x) g(x)
-2 1/108 12
-1 1/18 2
0 1/3 1/3
1 2 1/18
2 12 1/108
To reflect a function across the x-axis, we need to change the sign of the y-coordinate for every point on the function. Therefore, to find g(x), we take the negation of f(x) for every value of x. The second column in the third option is the negation of f(x), so it is the correct table of values for g(x).
Answer:
Its A.
Step-by-step explanation:
Other one was not clear enough lol ^
PLEASE HELP ME SOLVING THIS CHART PLEASEEE I TRIED BUT I DON'T FEEL IT RIGHT
A carpenter has a board that is 2 yards long He cuts it into 3 equal pieces. How many inches long is each piece?
Each piece is 24 inches long. One yard is equal to 36 inches, so two yards are equal to 72 inches.
To solve this problem, we need to convert the length of the board from yards to inches and then divide it into 3 equal parts.
First, we convert 2 yards to inches by multiplying by 36 (since there are 36 inches in a yard):
2 yards × 36 inches/yard = 72 inches
So, the board is 72 inches long.
Next, we divide 72 inches by 3 to find the length of each piece:
72 inches / 3 = 24 inches
Therefore, each piece is 24 inches long. In summary, to find the length of each piece of a board that is 2 yards long and cut into 3 equal pieces, we convert 2 yards to inches by multiplying by 36 and then divide by 3 to get each piece's length, which is 24 inches.
Find out more about yards to inches
brainly.com/question/1609326
#SPJ4
Which recursively defined function has a first term equal to 10 and a common difference of 4?
The recursively defined function has a first term equal to 10 and a common difference of 4 is f(n) = 6 + 4n.
When a recursive procedure gets repeated, it's called recursion. A recursive is a type of function or expression stating some conception or property of one or further variables, which is specified by a procedure that yields values or cases of that function by constantly applying a given relation or routine operation to known values of the function.
We have first term = a = 10
And the common difference of d = 4
We have the formula for the t terms of a as 10 and d as 4
f(n) = a + (n - 1)d
f(n) = 10 + (n-1) x 4
f(n) = 10 + 4n - 4
f(n) = 6 + 4n
So, the defined function is f(n) = 6 + 4n.
Learn more about recursively defined function:
https://brainly.com/question/29349024
#SPJ4
when on a stem and leaf plot and it does not show a number on the right side and only on the right side what would the number be on the right?
When on a stem and leaf plot and it does not show a number on the right side and only on the right side, the number on the right side would be zero.
What is a stem and leaf plot?A stem and leaf plot is a method of organizing numerical data into groups. It is a visual representation of a dataset in which each value is separated into a stem and a leaf. A stem is the left-hand digit(s) of the value, while a leaf is the right-hand digit(s).
The stem and leaf plot contains two columns, one for the stem and the other for the leaf. The stem values are arranged vertically in the left-hand column, and the leaf values are arranged horizontally in the right-hand column. The leaf column should be read from left to right to extract the values.
When a value appears multiple times, its leaves are stacked on top of one another. The stem and leaf plot is an effective method for representing data, particularly when dealing with large datasets.
Hence, If a stem and leaf plot displays a number only on the left side and not on the right side, then the number on the right side would be interpreted as zero.
To know more about stem and leaf plot refer here:
https://brainly.com/question/12857419#
#SPJ11
select a correct multiple regression equation that can be used to analyze the data for a two-factorial design with two levels for factor and three levels for factor . define all variables.
A multiple regression equation that can be used to analyze the data for a two-factorial design with two levels for factor A and three levels for factor B can be written as:
Y = b0 + b1A + b2B + b3AB + e
where Y is the dependent variable, A is the independent variable for factor A, B is the independent variable for factor B, A*B is the interaction between A and B, and e is the error term.
The variables can be defined as follows:
Y: The dependent variable that is being measured in the study.
A: The independent variable representing factor A, which has two levels (A1 and A2).
B: The independent variable representing factor B, which has three levels (B1, B2, and B3).
A*B: The interaction term between factor A and factor B.
e: The error term that captures the variability in the dependent variable that is not explained by the independent variables.
This equation allows us to examine the main effects of both factors (A and B) as well as their interaction (A*B) on the dependent variable Y in a two-factorial design.
To know more about multiple regression refer here:
https://brainly.com/question/3737733#
#SPJ11
maurice is buying a house that has 1,200 square feet on the main, a vaulted entry, and 650 square feet on the top level, plus a 335-square-foot garage. what's included in the livable square feet?
The livable square footage of the house is 1,850 square feet.
To determine the livable square footage of the house, we need to exclude areas that are not considered living spaces. The main level of the house has 1,200 square feet and is considered livable space.
The top level has 650 square feet, but since it is not clear if the entire space is livable or if there are non-livable areas (such as an attic), we cannot assume that the entire space is livable.
Therefore, we will exclude the top level from our calculation of livable square footage. The garage is also not considered livable space, so we will exclude the 335 square feet of the garage as well.
Thus, the livable square footage of the house is 1,200 square feet (main level) + 0 square feet (top level) + 0 square feet (garage) = 1,200 square feet. Therefore, the total livable square footage of the house is 1,850 square feet.
To know more about square feet refer here:
https://brainly.com/question/30678567#
#SPJ11
Find the values of x and y. Show all of your work.
in how many ways can a sample of 5 keyboards be selected so that exactly two have an electrical defect?
There are 105 ways to select a sample of 5 keyboards from a set of 10 keyboards such that exactly 2 of the keyboards have an electrical defect.
To find the number of ways to select a sample of 5 keyboards so that exactly 2 have an electrical defect, we can use the combination formula:
C(n,k) = n! / (k! * (n-k)!)
where n is the total number of keyboards, k is the number of defective keyboards, and C(n,k) is the number of ways to choose k defective keyboards from a total of n keyboards. Here, n = 10 (assuming there are 10 keyboards in the sample), and k = 2.
We can choose 2 defective keyboards from the total of 3 defective keyboards in C(3,2) = 3 ways. We can also choose 3 non-defective keyboards from the total of 7 non-defective keyboards in C(7,3) = 35 ways. Therefore, the total number of ways to select a sample of 5 keyboards so that exactly 2 have an electrical defect is:
C(3,2) * C(7,3) = 3 * 35 = 105
So there are 105 ways to select a sample of 5 keyboards from a set of 10 keyboards such that exactly 2 of the keyboards have an electrical defect.
To know more about combination formula: click here:
brainly.com/question/13095958
#SPJ4
Write the ratios for sin A and cos A. The diagram is not drawn to scale.
sin A= 14/50 cos A 48/50
sin A= 48/50 cos A 14/50
sin A 48/14 cos A 14/50
sin A= 48/50 cos A 14/48
The ratio of SINA and COSA = 48/50 and 14/50
What is trignometric ratios?This is the boundary or contour length of a 2D geometric shape.
Depending on their size, multiple shapes may have the same circumference. For example, imagine a triangle made up of wires of length L.
The same wire can be used to create a square if all sides are the same length.
The length covered by the perimeter of the shape is called the perimeter. Therefore, the units of circumference are the same as the units of length.
As we can say, the surroundings are one-dimensional. As a result, you can measure in meters, kilometers, millimeters, etc.
Inches, feet, yards, and miles are other globally recognized units of circumference measurement.
According to our question,
sina = perpendicular\ hypotenuse
= 48/50
cosa= base\ perpendicular
=
14/50
Hence, The ratio of SINA and COSA = 48/50 and 14/50
learn more about trigonometric ratios click here:
brainly.com/question/1201366
#SPJ1
Last year, Brian and his wife earned $550,000 in
wages. How much did he pay in income taxes?
As Brian and his wife earned $550,000 in wages during 2020. The amount he pays in income taxes would be $167,700.
What do we call an income taxes?An income tax is a type of tax levied by governments on the earnings of businesses and individuals within their jurisdiction.
The amount of income tax that Brian and his wife paid in 2020 depends on several factors, such as their filing status, deductions, credits, and the tax rates that apply to their income.
Assuming that Brian and his wife filed jointly and did not have any significant deductions or credits, we can use the following tax brackets and rates for the 2020 tax year: 35% on taxable income between $414,701 and $622,050.
. Assuming that they did not have any significant deductions or credits, their taxable income would be $550,000 (their wages) minus the standard deduction for joint filers, which was $24,800 in 2020.
The income taxes will be calculated as:
= (35% * $550,000) - $24,800
= $192,500 - $24,800
= $167,700
Read more about income taxes
brainly.com/question/30157668
#SPJ1
The interior angle of a regular polygon with n sides is 150 degrees. Calculate the value of n
Answer:
n=12
Step-by-step explanation:
sum of interior angles of polygon with n sides = (n-2)180
measure of an interior angle of a polygon times the number of sides (n) = sum of interior angles of polygon with n sides, therefore:
(n - 2)180 = 150n
180n - 360 = 150n
30n = 360
n = 360/30 = 12
How do the values of the 1s in 14. 937 and 6. 1225 compare?
The 1s in 14.937 and 6.1225 have distinct values. The digit 1 in 14.937 is in the thousandths place, representing a value of 0.001, but the digit 1 in 6.1225 is in the hundredths place, representing a value of 0.01.
When we compare the values of the 1s in these two numbers, we can observe that the 1 in 6.1225 is 10 times bigger than the 1 in 14.937. This is due to the fact that the place value of digit 1 in 6.1225 is ten times bigger than the place value of digit 1 in 14.937. It should be noted that while comparing the values of digits in numbers, their location or place value is a significant consideration. Even the smallest Changes in a digit's location can have a substantial influence on its total value. The variation in place value of the 1s in 14.937 and 6.1225 leads in a considerable disparity in their respective values in this situation.
Learn more about values here:
https://brainly.com/question/30781415
#SPJ4
mobile ladder stands with a top step over 10 feet high and which is 20 inches or more in depth require:
Mobile ladder stands with a top step over 10 feet high and 20 inches or more in depth must be equipped with a safety cage or body belt and lanyard to provide protection against a fall.
The cage should be at least 30 inches tall and should be fully enclosed on all four sides. Additionally, the top step should be enclosed and provided with a grab bar. The ladder must be securely supported and stabilized. Non-skid materials should be applied to the steps and platform. Finally, the ladder must meet safety requirements outlined in the Occupational Safety and Health Administration's (OSHA) regulations.
For more such questions on OSHA regulations.
https://brainly.com/question/29887509#
#SPJ11
a line in the xy-plane passes through the origin and has a slope of 1 7 . which of the following points lies on the line? a) (0, 7) b) (1, 7) c) (7, 7) d) (14, 2)
the y-coordinate must be 7 in order for the point to lie on the line.
A line in the xy-plane passes through the origin and has a slope of 1/7. Point B (1, 7) lies on the line, as the slope of the line is calculated by the equation y = mx + b, where m is the slope of the line, and b is the y-intercept. Since the line passes through the origin, the y-intercept is 0. This can be expressed as y = (1/7)x + 0
Learn more about coordinate
brainly.com/question/16634867
#SPJ11
Use que boards to do these divisions 363 divide 14
636 divide 21
908 divide 52
Using the division,
a) 363 ÷ 14 = 25 13/14
b) 636 ÷ 21 = 30 2/7
c) 908 ÷ 52 = 17 11/13
a) 363 ÷ 14, we first divide 363 by 14 to get a quotient of 25 with a remainder of 13. We then use the que board with 14 beads to represent this division. We start with the first digit of the dividend, which is 3. We count out 2 sets of 14 beads, which we move to the top of the board. We then move 1 more bead to the top, representing the remaining 13. The final result is 25 with a remainder of 13/14.
b) 636 ÷ 21, we divide 636 by 21 to get a quotient of 30 with a remainder of 6. We then use the que board with 21 beads to represent this division. We start with the first digit of the dividend, which is 6. We count out 3 sets of 21 beads, which we move to the top of the board. We then move 3 more beads to the top, representing the remaining 6. The final result is 30 with a remainder of 6/21, which can be simplified to 2/7.
c) 908 ÷ 52, we divide 908 by 52 to get a quotient of 17 with a remainder of 44. We then use the que board with 52 beads to represent this division. We start with the first digit of the dividend, which is 9. We count out 17 sets of 52 beads, which we move to the top of the board. We then move 44 more beads to the top, representing the remaining part of the dividend. The final result is 17 with a remainder of 44/52, which can be simplified to 11/13.
Learn more about division here
brainly.com/question/825875
#SPJ4
for each triangle find the given side length round to the nearest tenth
The missing side length for the triangle is given as follows:
[tex]x = \frac{16\sqrt{3}}{3}[/tex]
What are the trigonometric ratios?The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:
Sine of angle = length of opposite side to the angle divided by the length of the hypotenuse.Cosine of angle = length of adjacent side to the angle divided by the length of the hypotenuse.Tangent of angle = length of opposite side to the angle divided by the length of the adjacent side to the angle.For the angle of 60º on the triangle, we have that:
The opposite side is of 16.The adjacent side is of x.The tangent of 60º is equals to the square root of 3, hence the value of x is obtained as follows:
tan(60º) = 16/x
[tex]\sqrt{3} = \frac{16}{x}[/tex]
[tex]x = \frac{16}{\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}}[/tex]
[tex]x = \frac{16\sqrt{3}}{3}[/tex]
Missing InformationThe triangle is given by the image presented at the end of the answer.
More can be learned about trigonometric ratios at brainly.com/question/24349828
#SPJ1
at steady state, the throughput time for one loaf is 3 hours 30 minutes. how much total wip is in the system, in loaves
At steady state, the total WIP in the system is equal to the throughput time divided by the time it takes to make one loaf. Thus, the total WIP in the system is 3.5 loaves.
The total WIP in a system is the sum of all of the work that is in progress. At steady state, the total WIP in the system can be calculated by dividing the throughput time (the time it takes for one loaf to be processed from start to finish) by the time it takes to make one loaf.
In this example, the throughput time is 3 hours 30 minutes and it takes 1 hour to make one loaf. Therefore, the total WIP in the system is 3.5 loaves. This means that at any given time, there are 3.5 loaves in progress in the system.
To know more about throughput time click on below link:
https://brainly.com/question/29669039#
#SPJ11
What’s the area of this?
Answer:
Step-by-step explanation:
1) Cut the picture up into two rectangles
The larger rectangle has a length (15in+2in) of 17 and a width of 13. The smaller rectangle has a length of 2 and a width of 5.
2) Find the area of both rectangles
Rectangle 1: 17 x 13 = 221
Rectangle 2: 5 x 2 = 10
3) Add the area of both rectangles
221 + 10 =231
4) The answer is 231 inches squared
What is the length of the altitude drawn to the hypotenuse? The figure is not drawn to scale.
The length of the altitude drawn to the hypothenuse, WY as required to be determined is; 6.
What is length of segment WY?As evident from the task content, it follows that the length of the altitude, WY drawn to the hypothenuse is to be determined.
Let WY be represented as a;
By observation; it follows that the triangles WXY and WXY are similar triangles.
Hence, the ratio which holds in the figure is;
12 / a = a / 3
Therefore by cross-multiplication, we have that;
a² = 36
a = 6.
Ultimately, the length of the altitude drawn to the hypothenuse is; 6.
Read more on similar triangles;
https://brainly.com/question/14285697
#SPJ1
the fox population iun a certain region has an annual growth rate of 9% per year. in the year 2012 there were 23900 fox counted in the area. what is the fox population predicted in the year 2020
The population of foxes in the region in 2020 is predicted to be 40,174.
The population of foxes in the region in 2020 can be calculated using the formula [tex]P = P0 (1+r)^n[/tex], where P is the population at the end of n years, P0 is the initial population, and r is the annual growth rate. The fox population iun a certain region has an annual growth rate of 9% per year. in the year 2012 there were 23900 fox counted in the area.In this case, P0 = 23900 and r = 0.09. Since the starting year is 2012, the number of years since then is n = 8. Plugging these values into the formula, P = 23900 (1.09)^8 = 40,174. Therefore, the population of foxes in the region in 2020 is predicted to be 40,174.
Learn more about number of years here:
https://brainly.com/question/10276187
#SPJ4
In right triangle XYZ, ∠Y is the right angle and m∠X = 60°. If YZ = 4, what is XY?
Answer:
We can use the trigonometric ratios of a 30-60-90 triangle to find the length of XY. In a 30-60-90 triangle, the length of the hypotenuse is twice the length of the shorter leg, and the length of the longer leg is √3 times the length of the shorter leg.
Since ∠X is 60°, we know that ∠Z is 30°, and we can set up the following equation:
XY / 4 = 2 / √3
To solve for XY, we can multiply both sides of the equation by 4√3:
XY = 4 * 2 / √3
Simplifying the right side, we get:
XY = 8 / √3
To rationalize the denominator, we can multiply the numerator and denominator by √3:
XY = (8 / √3) * (√3 / √3)
Simplifying, we get:
XY = 8√3 / 3
Therefore, the length of XY is 8√3 / 3, which is approximately 4.62 units.
suppose you roll a pair of fair dice repeatedly. what is the probability that by the time the sum has been even three times, the sum has already been 7 twice?
The probability that by the time the sum has been even three times, the sum has already been 7 twice is 1/36.
This is because the total number of possible combinations of two dice is 36, and only one combination, (3,4), has the sum of 7 and is also an even number.
Suppose you roll a pair of fair dice repeatedly : https://brainly.com/question/31079082
#SPJ11
michael got a score of 83 on a geography test that has a mean of 72 and a standard deviation of 6 and josh got a score of 61 on an accounting test that has a mean of 55 and a standard deviation of 3, find the z-score
a) Michael's z-score is 1.83.
b) Josh's z-score is 2.
A z-score (also known as a standard score) is a statistical measurement that represents the number of standard deviations a data point is from the mean of the population. It's a way to standardize scores from different populations or datasets, allowing for easier comparisons.
To find the z-score, we use the formula
z = (x - μ) / σ
where
x = the individual score
μ = the mean of the population
σ = the standard deviation of the population
For Michael's score
x = 83
μ = 72
σ = 6
z = (83 - 72) / 6 = 1.83
Therefore, Michael's z-score is 1.83.
For Josh's score
x = 61
μ = 55
σ = 3
z = (61 - 55) / 3 = 2
Learn more about z-score here
brainly.com/question/15016913
#SPJ4
vital capacity is a measure of the amount of air that someone can exhales after taking a deep breath. what is the probability that we see our sample average difference or higher given there is no difference? g
a. The exit pressure is 19.76 lbf/in².
b. The ratio of the inlet area to the exit area is 3.125.
C. The exit area ratio (0.32) is less than the critical area ratio (1.89), the nozzle is converging-diverging in cross section.
To solve this problem, we need to apply the conservation equations for mass, momentum, and energy along with the isentropic relations.
a. To determine the exit pressure, we can use the isentropic relation for pressure ratio across a nozzle:
[tex]P_2/P_1 = (T_2/T_1)^{\frac{\gamma}{\gamma -1}}[/tex]
where [tex]P_1[/tex] and [tex]T_1[/tex] are the inlet pressure and temperature,
[tex]P_2[/tex] and [tex]T_2[/tex] are the exit pressure and temperature, and
γ is the specific heat ratio of air.
Using Table A-22E, we find that γ = 1.4 for air at 800°R.
Substituting the given values and solving for P2, we get:
[tex]P_2[/tex] = [tex]P_1 \times (T_2/T_1)^\frac{\gamma}{\gamma -1}[/tex] = [tex]45 \times (1500/480)^{(1.4/0.4)}[/tex]= 19.76 lbf/in²
b. To determine the ratio of the exit area to the inlet area, we can use the continuity equation:
[tex]A_1V_1 = A_2V_2[/tex]
where [tex]A_1[/tex] and [tex]A_2[/tex] are the inlet and exit areas, and
[tex]V_1[/tex] and [tex]V_2[/tex] are the inlet and exit velocities.
Substituting the given values, we get:
[tex]A_2/A_1 = V_1/V_2[/tex] = 480/1500 = 0.32
The ratio of the exit area to the inlet area is 0.32, or equivalently, the ratio of the inlet area to the exit area is 1/0.32 = 3.125.
c. To determine whether the nozzle is diverging only, converging only, or converging-diverging in cross section, we can compare the exit area ratio to the critical area ratio.
The critical area is the minimum area that allows the flow to reach sonic conditions, and it depends on the pressure and temperature of the flow.
For a converging-diverging nozzle, the exit area ratio is less than the critical area ratio, which is given by:
A* / [tex]A_1[/tex] = [tex](2/(\gamma+1))^{(\gamma+1)}/(2(\gamma-1)/(\gamma+1))^{(\gamma+1)/(\gamma-1)}[/tex]
where A* is the critical area,
[tex]A_1[/tex] is the inlet area, and
γ is the specific heat ratio.
Using the given values and γ = 1.4, we find that:
A* / [tex]A_1[/tex] = 1.89
For similar question on area ratio
https://brainly.com/question/15273238
#SPJ11
Question:-
Air enters a nozzle operating at steady state at 45 lbf/in.2, 800°R, with a velocity of 480 f/s, and expands isentropically to an exit velocity of 1500 ft/s. Using data from Table A-22E as needed, determine
a. the exit pressure, in lbf/in². 19.76
b. the ratio of the exit area to the inlet area. 0.577
c. whether the nozzle is diverging only, converging only, or converging-diverging in cross section. conv-div
Here are some clues to a mystery number.
• The GCF of 18, 36, and me is 2.
• 1 am a multiple of 5.
1 am greater than 18 and less than 30.
The only number between 18 and 30 that is a multiple of 5 and satisfies this condition is 20, Therefore, the mystery number is 20
How to determine the mystery numberThe GCF of 18, 36, and the mystery number is 2.
This means that the mystery number is divisible by 2.
The mystery number is also a multiple of 5, so it must end in either 0 or 5.
The mystery number is greater than 18 and less than 30, so it can only be 20 or 25.
Let's check if the GCF of 18, 36, and 20 is 2.
The factors of 18 are 1, 2, 3, 6, 9, and 18.
The factors of 36 are 1, 2, 3, 4, 6, 9, 12, 18, and 36.
The factors of 20 are 1, 2, 4, 5, 10, and 20.
The only factor that 18, 36, and 20 have in common is 2, so the mystery number is 20.
Therefore, the mystery number is 20.
Learn more about GCF at https://brainly.com/question/219464
#SPJ1
Find the side of a square whose diagonal measures 15v2 cm
15 is area of Side of Square .
What is a square, exactly?
All four of the sides and all four of the angles make up the regular quadrilateral known as the square. The square's angles are 90 degrees away from each other or at right angles. In addition, the square's diagonals are equally spaced and split at a 90-degree angle.
Length of diagonal of Square =15√2 cm-------------(1)
Let side of Square = a cm
So, Length of Diagonal
By Using Pythagorean Theorem
= √a² + a²
= a√2 ........................(2)
Equating (1) and (2)
a√2 = 15√2
a = 15
cancelling root 2 from both sides.
a = 15
Side of Square= 15 cm
Learn more about Square
brainly.com/question/30556035
#SPJ1
The complete question is -
Find the side of a square whose diagonal is of the given measure. Given = 15√2 cm.
a sample survey is to be conducted to determine the mean family income in an area. the question is how many families should be sampled? in order to get more information about the area, a small pilot survey was conducted, and the standard deviation of the sample was computed to be $400 with the mean of $60,000. the sponsor of the survey wants you to use the 0.99 degree of confidence. the estimate is to be within $90. how many families should be interviewed?
The sample size required is 182 families should be interviewed.
To calculate the number of families that should be interviewed to obtain the desired precision and degree of confidence, one must first determine the minimum sample size required to achieve the desired degree of confidence. As the standard deviation of the sample was computed to be $400 with the mean of $60,000.
Sample size formula: n = (Z² * s²) / E²
The formula for the degree of confidence: Z = 2.576
Sample size formula: n = (Z² * s²) / E²
Substituting the values, we get n = (2.576² * $400²) / $90²= 181.49 = 182 families. The sample size required is 182 should be interviewed families.
To learn more about "Standard deviation": brainly.com/question/23907081
#SPJ11
X 1 2 3 4 у 0 -3 -6 -9
what is the slope intercept form?
Answer:
y = -3x + 3
Step-by-step explanation:
Knowing that;
Slope Intercept form : y = mx + b
To Find the Slope:
Used any given ordered pair given and use- m = [tex]\frac{y_2-y_1}{x_2- x_1}[/tex]
Find the slope of the lineThen Plug it in the Slope Intercept formGiven Table:
X Y
1 0
2 -3
3 -6
4 -9
Solve:
I will use the ordered pair:
(1,0)
(2, -3)
1 and 2 are "x"
0 and -3 are "y"
1 = x₁ 2 = x₂0 = y₁ -3 = y₂m [tex]=\frac{-3-0}{2- 1}[/tex]
m [tex]=\frac{-3}{1}[/tex]
m [tex]=[/tex] -3
Now putting the value of m in equation
y = -3x + b
To find the y intercept (b) in the slope intercept formula:
Choose any ordered pair and substitute it in the slope intercept.
Let's choose the first point, (1,0) for calculating y-intercept.
y = mx + b0 = -3(1) + b0 = -3 + bb = 3Now plug it in the slope intercept formula:
y = mx + b
y = -3x + 3
Hence, the slope intercept form for that table is:
y = -3x + 3.
RevyBreeze