When there is a temperature inversion, you would expect to experience Group of answer choices clouds with extensive vertical development above an inversion aloft. good visibility in the lower levels of the atmosphere and poor visibility above an inversion aloft. an increase in temperature as altitude increases.

Answers

Answer 1

Temperature inversion leads to an increase in temperature as altitude increases.

The term temperature inversion refers to a situation in which a layer of warm air lies over a layer of cool air. This is also referred to as thermal inversion. This occurs when the air below to loose heat rapidly.

One of the effects of temperature inversion is reduction in visibility. So, thermal inversion leads to an increase in temperature as altitude increases.

Learn more: https://brainly.com/question/8646601


Related Questions

A swimming pool has dimension of 30m×10m×3m. When it is filled with water , what is the thrust on the bottom and sides

Answers

Answer:

3,900m³

Explanation:

Which will be different on the moon than it is on Earth?

weight

mass

Answers

Answer:

Below

Explanation:

On the moon, an objects weight will be different than it is on earth. This is because we cannot change the mass of an object, the mass of an object is the measure of matter an object has. However the weight is depended on the gravitational pull of whatever planet you are on. In this case, weight will be lighter on the moon than it is on earth because the moon's gravitational pull is 1.62 m/s^2 while earths is around 9.8 m/s^2.

Hope that helps!

if 20 boys can sweep the school compound in 8 minutes, how many boys can sweep it in 10minutes​

Answers

Answer:

So this is just a ratio/proportion problem

so lets say its in boys:minutes

so in the first scenario

20:8

and we want to find

x:10

So proportion really

20/8=x/10

cross multiply

25

25 boys can sweep it in 10 minutes

HELP PLZZZZZZ AHHHHH

Answers

Answer: I think it's larger

Explanation:  man im just trying to help you

A person who sits on the right-hand seat of the car that is making a left turn slides over to the right. What is the possible reason for this?

Answers

Answer:

zsjgbjidasngwhugbhwuabvhuvbwhuebewghvwev

Explanation:

11111111111111111111111111111111111111111111111111111

A 1,000 kg truck is traveling at 3 m/s. Suddenly, the driver sees a herd of cows on the road ahead and applies the brakes. The truck's tires could fail after doing 5,000 J of work to slow the vehicle. Can the truck stop before the tires fail?


A. Yes, the total KE the tires need to transfer out of the system is less than 5,000 J.


B. Yes, the tires do not do any work, it is only the brakes that do work.


C. No, the truck had to stop suddenly and the quick change in KE will cause the tires to fail.


D. No, the total KE the tires need to transfer out of the system is more than 5,000 J.

Answers

This question involves the concepts of the law of conservation of energy and kinetic energy.

The correct option is "A. Yes, the total KE the tires need to transfer out of the system is less than 5,000 J".

According to the law of conservation of energy:

Loss in Kinetic Energy = Work done by the tires

[tex]\frac{1}{2}mv^2=W[/tex]

where,

W = work done by tires = ?

m = mass of the truck = 1000 kg

v = speed of the truck = 3 m/s

Therefore,

[tex]W=\frac{1}{2}(1000\ kg)(3\ m/s)^2[/tex]

W = 4500 J

Since the failure limit of work done by the tire is 5000 J, which is greater than the actual work done by the tire in this scenario. Hence, the tire will not fail in this case.

Learn more about the law of conservation of energy here:

brainly.com/question/20971995?referrer=searchResults

The attached picture explains the law of conservation of energy.

Is a football tackle an elastic or inelastic collision and why?

A: elastic, because momentum is conserved

B: inelastic, because kinetic energy is conserved

C: inelastic, because momentum is not conserved

D: inelastic, because kinetic energy is not conserved

Answers

If the kinetic energy of an object changes, then the collision is considered inelastic. This is regardless of whether the objects sticks together or not.

My best answer for this question would be D) inelastic, because kinetic energy is not conserved.

We can tell from the collision that it is not elastic.

Momentum is is conserved, it transfers to the other player.

Kinetic energy is not conserved, at it turns into internal friction.

I hope this helps! :)

A football tackle is an inelastic collision , because kinetic energy is not conserved.

What is collision?

When two bodies or particles move towards enough to interact with each other it is called the particles or the bodies are colliding.

What are the types of collision?Elastic collisioninelastic collisionWhat is an elastic collision?In this type of collision , there is no loss of kinetic energy.The momentum and kinetic energy both are conserved.What is an inelastic collision?in this type of collision , there is a loss of kinetic energy.The momentum of the system is conserved but the kinetic energy is not conserved .

So, when the football tackles it's kinetic energy changes.

Thus, A football tackle is an inelastic collision , because kinetic energy is not conserved.

Learn more examples about an Inelastic collision here -

https://brainly.com/question/24915434

#SPJ2

What is the correct definition of rarefaction

Answers

Answer:

Explanation:

A decrease in the density of something is rarefaction. ... Most of the time, rarefaction refers to air or other gases becoming less dense. When rarefaction occurs, the particles in a gas become more spread out. You may come across this word in the context of sound waves.

60W light bulb is left on for 5mins. How much energy does it use in KWH

Answers

Answer:

Energy = Power × Time

time must be hoursPower must be in kilowatts

[tex]{ \tt{E = ( \frac{60}{1000} ) \times ( \frac{5}{60}) }} \\ \\ { \tt{E = 0.005 \: kwh {}^{ } }}[/tex]

Do you think humans will ever walk on the sun?

Answers

[tex] \: \: \: \: \: [/tex]

yes

because sun have a super nova and if someone get it there that person definitely get burn

hope it helps

[tex] \: \: \: \: \: [/tex]

Two cars A and B are moving along a straight road in the OPPOSITE direction with velocities of 25 km/h and 40 km/h, respectively. Find the velocity of car B relative to car​

Answers

Answer:

65km/h

Explanation:

Here,

Relative velocity of car moving in different directions with different velocities =Va + Vb

=25+40

=65 km/h

Please find attached photograph for your answer.

Hope it helps.

Do comment if you have any query.

what noncontact forces act on an object that are balanced

Answers

Answer:

I can give you a list of noncontact forces off of my head, if that is what you need.

Explanation:

First, gravity. It acts everywhere and pulls down every object that is in the air towards the ground, unless they have an equal and opposite force that counters it.

Second, wind. I don't think this will count because wind is a physical thing, but it can be used in the same way as we did with gravity. If the force counteracting it is larger, equal, and opposite of the force it is countering, then it will move forward, through the wind.

A ____ is believed to occur when energy, stored in a twist in the solar magnetic field above a sunspot, is suddenly released.

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

A solar flare is believed to occur when energy, stored in a twist in the solar magnetic field above a sunspot, is suddenly released.

When making a left turn, drive into the intersection, make the turn smoothly and without strain on the engine, braking to about ... to .........mph and stay on the brake until approximately half way into the intersection.

Answers

Answer:

whats the question

Explanation:

A ball is released freely from the top of a building 80m high. Find its speed.​

Answers

At the top of the building, the speed of the ball is zero.

The speed increases steadily as the ball falls.

When it hits the street, its speed is 39.6 m/s.

a box takes 350 N to start moving the coefficient of static friction is 0.35. what is the weight of the box?

Answers

Answer:

101.937 kg

Explanation:

The force needed to get the box moving must just cancel the static friction force:

F = µsmg  =  0.35•m•9.81 = 350 --->   m = 350 / (0.35•9.81) = 101.937 kg

Again, with units shown, and using 1 N = 1 kg•m/s2:

0.35•m•9.81(m/s2) = 350 N

solving for m:

m = 350 N / (0.35•9.81 m/s2)  =  (350 kg•m/s2) / (3.434 m/s2 ) = 101.937 kg

______________________

(Hope this helps can I pls have brainlist (crown)☺️

Determine the work done by the force Fx=(6x-4)N as the object moves from x1=0 to x2=3 m.

Answers

Answer:

15J

Explanation:

Let's assume force and motion have the same direction, so the dot product between the two reduces to the product of magnitudes.

If you studied calculus:  [tex]w= \int \limits^3_0 6x-4dx[/tex], by definition. Some "easy" math, that's [tex](3x^2-4x)\limits^3_0=27-12 - 0 = 15 J[/tex]

Else. we have to take the long way.  if the force was constant, and you plotted magnitude of the force vs position in a graph, you would get an horizontal line, and your work would be the area between the line and the x axis. And there is no reason why it shouldn't be the same for a variable force - if you think about it, it's the same way they justify the position formula for an accelerated motion. Let's graph it and start debating - sorry for my paint skills. We can easily say that in the green triangle the force is opposing the motion, so its work is negative, while in the blue area force and displacement go in the same direction, thus work is positive. Now it's just to calculate the area of two triangles

For the green one, it's a right triangle with side lengths 4 and 2/3, whose area is [tex]\frac12(4)(\frac23) = \frac43[/tex].

For the blue triangle, it's again a right triangle with side lengths 14 and 3-2/3= 7/3, whose area is [tex]\frac12(14)(\frac73) = \frac{49}3[/tex]

Our total work is the difference between the two, or [tex]w= \frac{49}3-\frac43 = \frac{45}3 = 15[/tex]

The maximum allowable potential difference across a 250 mH inductor is 360 V . You need to raise the current through the inductor from 1.5 A to 2.5 A . What is the minimum time you should allow for changing the current?

Answers

This question involves the concepts of potential difference, inductance, and current.

The minimum time that should be allowed for the current to change is "0.694 ms".

The inductance of an inductor is given by the following formula:

[tex]E=L\frac{\Delta I}{\Delta t}\\[/tex]

where,

E = potential difference across the inductor = 360 volts

L = inductance of the inductor = 250 mH = 0.25 H

ΔI = change in current = 2.5 A - 1.5 A = 1 A

Δt = time required = ?

Therefore,

[tex]\Delta t = \frac{(0.25\ H)(1\ A)}{360\ volts}[/tex]

Δt = 6.94 x 10⁻⁴ s = 0.694 ms

Learn more about inductance here:

https://brainly.com/question/17431388?referrer=searchResults

The acceleration of an object is inversely proportional to its mass, so if you decrease its mass while keeping the net force the same, the acceleration will increase.
true or false​

Answers

Answer:

True

Explanation:

Since acceleration is inversely proportional to mass, decreasing mass will make the object lighter, and thus easier to speed up. So acceleration increases as mass decreases and vice versa

Answer: TRUE                                                                        Explanation:Newton's second law of motion can be formally stated as follows: The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

a trip from Austin to Dallas takes about 3 hours going 65 mi/hr north is this speed, velocity, or acceleration?

Answers

Answer:volocity

Explanation:

difference between 1 hectoliter and one kiloliter

Answers

1 hectoliter = 100 liters and one kiloliter =1000 liters
A hectoliter is 10 times smaller than a kiloliter

Answer: 100 and 1000

Explanation:

You are walking back toward the back of a bus that is moving forward with a constant velocity. Describe your motion relative to the bus and relative to a point on the ground.

Answers

Answer: Relative to the bus, you are stationary. Relative to a point on the ground, you are walking forward with velocity  equal to the velocity of the bus.

As a person walks toward the back of a bus, they are walking towards a stationary object according to their own perspective. However, from an outside perspective, the bus is moving forward with a constant velocity and so relative to that point in motion, you are actually walking backwards with respect to it. This difference in motion means you would not be able have the same experience as the person on the bus when getting off because when you get off you would stop while they continue going forward. The last sentence could be considered a footnote because it only applies if this was an actual situation rather than just an analogy question in a physics test.

Relative to the bus, you move at walking speed. The motion relative to the ground is in the direction same as the bus and equal to the difference between the speed of the bus and walking speed.

What is relative motion?

When an object has a certain velocity, then this velocity is w.r.t. some frame that is called the reference frame. When we measure the velocity of an object, the ground or the earth is taken as the reference frame.

The motion of an object observed by the observer depends on the frame of the observer and this type of motion is known as relative motion.

For example, if you are traveling in a train and the train is moving at a speed of 80 km/hr, then your speed according to another passenger sitting on the same train is equal to zero.

Similarly, if you are walking toward the back of a bus, then your motion relative to the bus is walking speed. Relative to the ground, it is the difference between the speed of the bus and walking speed.

Learn more about relative motion, here:

https://brainly.com/question/776045

#SPJ2

In your response be very specific and break down each item on the list, then state if they would be classified the same or differently.

Consider the definition for each as you respond.
• atoms
• elements
• compounds
• molecules
• matter

Answers

There is no questions so I’m just going to tell you what all these are.
1. Atoms are the smallest particle of a chemical element that can exist.
2. Elements are pure substances and they are only made of one type of atom. Elements are found in the periodic table (can be metals, non metals, gases, liquids).
3. Compounds are made up of two or more types of atoms chemically bonded together.
4. Molecules are made up of two or more types of atoms not chemically bonded together.
5. Matter is really any substance that has mass and takes up volume.

A man on the moon with a mass of 90 kilograms weighs 146 newtons. The radius of the moon is 1.74 x 10^6
meters. Find the mass of the moon

equation- F= G m1 m2/ d^2

Answers

Answer:

7.36 × 10^22 kg

Explanation:

Answer:

D

Explanation:

which acts as a transverse wave with particle motion perpendicular to wave motion?

Answers

Answer:

transverse wave, motion in which all points on a wave oscillate along paths at right angles to the direction of the wave's advance. Surface ripples on water, seismic S (secondary) waves, and electromagnetic (e.g., radio and light) waves are examples of transverse waves.

A car goes from 60 m/s to 75 m/s in 10 seconds.calculate the car’s acceleration?

Answers

Explanation:

Uhhhh here is an example

a=vt. =27 m/s10 s. =2.7 m/s2.

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Acceleration of the car is ~

[tex] \boxed{1.5 \: \: m/s}[/tex]

[tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]

We know that,

Acceleration = rate of change in velocity ~

that is ~

[tex]a = \dfrac{v - u}{t} [/tex]

where,

v = final velocity

u = initial velocity

t = time taken ~

now, let's solve ~

[tex]a = \dfrac{75 - 60}{10} [/tex]

[tex]a = \dfrac{15}{10} [/tex]

[tex]a = 1.5 \: \: m/s[/tex]

Describe the forces that make a bicycle move.

Answers

Answer:

this is an example of Newton's Second Law, acceleration happens when a force acts on a mass.

the force that makes the bicycle move is your foot pushing against the pedal

Suppose measure the mass of an orange. Then you peel the orange and separate out the slices. If you measure the orange peel and all the slices, will that mass equal the mass of the whole orange?

yes

no

Answers

The mass of the orange after it has been cut into pieces will still remain the same as the mass of the whole orange.

Let us recall that the law of conservation of mass states that, mass can neither be created nor destroyed but is converted from one form to another. In accordance with this law of conservation of mass. The mass of the orange must remain the same after it has been cut in pieces.

Hence, If the mass of an orange is measured after it has been cut into pieces, the mass of the orange after it has been cut into pieces will still remain the same as the mass of the whole orange.

Learn more: https://brainly.com/question/865531

Image credit: The Hubble Heritage Team (AURASTSCI/NASA)
To which category does galaxy #2 belong? Why does it belong in this category?
WRITER

Answers

Can i ask u a question

how to do the next ques for more

Brainliest me please

A bowling ball and a ping-pong ball are each tied to a string and hung from the ceiling. The distance from the ceiling to the CM of each object is the same. Which object would have a longer period of motion if they were set swinging

Answers

Both would have the same period
Other Questions
A backpacking club can average 2 1/2 miles per hour. At thatrate, how long will it take for a hike of 8 3/4 miles? 4)The basic powers of the Federal government are outlined in Articles I, II, and Ill of the United States Constitution. This is MOSTclosely related to which Constitutional principle?A)FederalismB)RepublicanismChecks and BalancesD)Separation of Powers5)Which of these would be an example of an enumerated power of Congress? Answer and explain every step of your solution. 6-5/8=(5/8 is just like that but slanted) can anyone help. how to solve this plz. 58power4 -388 Help please Ill mark blainlist(2a) if 3r = 4s, then r/s = ? 2) In a School, the duration of each period in the Junior Section is 20 minutes and inthe Senior Section it is 35 minutes. Both bells ring together when School starts at10:30 am. The next time they ring together is at lunch time. At what time does lunchbreak start?A. 12:50 pm B. 12 noonC. 11:40 am D. 12:30 am cash transactions involving the purchase and sale of long-term assets and current investments are classified on the statement of cash flows as activities. How many aluminum ions are present in 65.5 mL of 0.210 M All3solution? The manufacturing cost of an air-condioning unit is $544, and the full-replacement extended warranty costs $113. If the manufacturer sells 506,970 units with extended warranties and must replace 20% of them as a result, how much will the replacement costs be? (Note: Assume manufacturing costs and replacement costs are the same. ) a. $55,158,336 b. $11,457,522 c. $2,129,274 d. $66,717,252 Please select the best answer from the choices provided A B C D. When you make a dns query, where does your computer first check to find an ip address to name mapping?. what is happening metabolically at the tissue level during exercise? Pls help meeee the question is in the photo pls no links or fake answers pls answer both questions The is the wind system responsible for the movement of weather from west to east across most of the continental United States Apolar easterliesB prevailing westerliesC trade winds (1 point)Write the complex number z= -7-10i in polar form: z = r(cos (theta)+ i sin (theta)) where r= and 0 = The angle should satisfy 0 can somebody tell me if these answers are correct? what does it mean when your pupils dilate when you look at someone What did Galileo have to do in order to be absolved from this "crime"? The first steps in glycolysis involveA) splitting glucose into two three-carbon molecules.B) generation of ATP.C) reducing glucose.D) adding two phosphates from ATP to glucose.E) both the addition of two phosphates to glucose, and then splitting glucose