Answer:
1. Evaporation
2. Melting
And lastly,
3.Sublimation
Answer:
evaporation, melting,sublimation
Explanation:
two parallel wires separated by 2.20 cm each carry 43.0 a and experience a force of 0.700 n. if one wire is very long, how long is the other one?
Two parallel wires separated by 2.20 cm each carry 43.0 A and experience a force of 0.700 N. If one wire is very long, so the length of the other wire is 2 × 10² m.
Given data:
Separation between two parallel wires, d = 2.20 cm
Current passing through wires, I = 43.0 AForce between two parallel wires, F = 0.700 N
We need to find the length of the wire.
Force between two parallel wires is given by the formula;
F = μ0 x I1 x I2 x L / d
where,
μ0 = 4π × 10⁻⁷ T m/A is the magnetic permeability of free spaceI1 and I2 are the current passing through wires L is the length of wire d is the distance between the two parallel wires
Substituting the values of the given data,
0.700 = 4π × 10⁻⁷ × 43.0 × I2 × L / 0.0220I2L = 0.700 × 0.0220 / 4π × 10⁻⁷ × 43.0L = 2 × 10² mTherefore, the length of the other wire is 2 × 10² m.
Learn more about length: https://brainly.com/question/24487155
#SPJ11
if the frequency of the block is 0.44 hz , what is the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy?
If the frequency of the block is 0.44 hz , the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is: (1/0.44)√2P/m
At the time the block is released, its potential energy is at a maximum and its kinetic energy is zero. The block then moves down, and its potential energy decreases while its kinetic energy increases.
At any given time, the total energy of the block is equal to the sum of its potential energy and its kinetic energy. So, when the kinetic energy is exactly one-half of the potential energy, the total energy of the block is equal to three halves of the initial potential energy.
To calculate the earliest time at which the kinetic energy is one-half of the potential energy, we must use the equation P = ½mv^2. Rearranging, we get: v = √2P/m. We also know that the frequency of the block is 0.44 Hz, which is equal to one divided by the period, T. Thus, the velocity of the block can be calculated by multiplying both sides of the equation with T: v = √2P/(mT).
Therefore, the earliest time after the block is released that its kinetic energy is exactly one-half of its potential energy is equal to: [tex]T = \sqrt{2}P/(mv) = \sqrt{2} P/(m*(1/f)) = (1/f)\sqrt{2} P/m[/tex]
Plugging in the values given in the question, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to: T = (1/0.44)√2P/m.
To sum up, the earliest time after the block is released that its kinetic energy is one-half of its potential energy is equal to (1/f)√2P/m, where f is the frequency of the block, P is its potential energy, and m is its mass. In this case, the earliest time is equal to (1/0.44)√2P/m.
To know more about kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
The student came up with a model that shows a loop of wire being rotated by some external force between two strong, permanent magnets. This causes the charges in the loop to flow. Pole piece Armature Slip ring What did the student make - a model of -- A. a motor O B. both a motor and a generator O C. neither a motor nor a generator O D. a generator
The correct option is A, The flow of charges can be used to power the load Pole piece is a generator this description and model explain.
A generator is a machine or device that converts one form of energy into another, typically mechanical energy into electrical energy. It works on the principle of electromagnetic induction, in which a conductor is moved through a magnetic field, creating an electric current in the conductor. Generators are commonly used in power plants to produce electricity on a large scale, as well as in portable devices such as generators for camping and construction sites.
There are several types of generators, including AC generators, which produce alternating current, and DC generators, which produce direct current. They can also be powered by different types of fuel, including diesel, gasoline, and natural gas. Generators play an important role in providing backup power during power outages, and are used in remote areas where access to electricity is limited.
To learn more about Generator visit here:
brainly.com/question/1267492
#SPJ4
Complete Question:-
A student was asked to draw and describe a model for either an electric motor or a generator. Her description and model are shown below: The model below shows a loop of wire which is being rotated by some external force between two strong permanent magnets. This causes the charges in the loop to want to flow through it. The flow of charges can be used to power the load Pole piece. What does this description and model explain? A. A generator
B. A motor
C. Neither a motor nor a generator.
D. Both a motor and a generator.
A gamma ray photon has a higher frequency than a radio photon. Therefore, the gamma ray photon has a shorter wavelength, higher energy, and same speed. a longer wavelength, lower energy, and same speed. a longer wavelength, higher energy, and same speed. a shorter wavelength, higher energy, and higher speed. a shorter wavelength, lower energy, and lower speed. a longer wavelength, higher energy, and no speed.
A gamma ray photon has a higher frequency than a radio photon, which means it has a shorter wavelength and higher energy. Option c is the correct choice.
Electromagnetic radiation, such as gamma rays and radio waves, can be described in terms of both wavelength and frequency. Wavelength is the distance between successive peaks or troughs of a wave, while frequency is the number of wave cycles that pass a given point in a unit of time. The two are related by the equation λν=c, where λ is the wavelength, ν is the frequency, and c is the speed of light.
Gamma rays have a much higher frequency than radio waves, which means they have a much shorter wavelength. Since energy is directly proportional to frequency, gamma rays also have much higher energy than radio waves. Both gamma rays and radio waves travel at the speed of light, so they have the same speed. Therefore, the correct answer is option c - a shorter wavelength, higher energy, and higher speed.
To know more about gamma ray, here
brainly.com/question/23281551
#SPJ4
g what is the power p supplied to a resistor whose resistance is r when it is known that it has a voltage v across it? express the power p in terms of r and v .
The power p supplied to a resistor whose resistance is r when it is known that it has a voltage v across it can be expressed as P = v²/r.
What is power?Power is the rate at which energy is transferred. The power P can be represented as P = W/t, where W is the work done, and t is the time required to complete the work.
What is resistance?Resistance is the ratio of voltage to current in an electrical circuit. It is a measure of how difficult it is to transfer a current through a component.
What is the power supplied to a resistor whose resistance is r when it is known that it has a voltage v across it?The power P provided to a resistor whose resistance is r when it is known that it has a voltage v across it is given by:
P = v²/r
Therefore, power can be expressed in terms of resistance and voltage as P = v²/r, where v is the voltage across the resistor and r is its resistance.
Learn more about Power here: https://brainly.com/question/11569624
#SPJ11
the bulb is about one meter from the battery. once the switch is closed, how long will it take for electrons from the battery to reach the bulb?
When a switch is closed, the electrons from the battery will reach the bulb at the speed of light or 299,792,458 meters per second. So, it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.
Electric current is the flow of electric charges. The flow of electric charges through a circuit is known as current. It is defined as the rate of flow of electric charges through a conductor. The SI unit of electric current is Ampere (A). Electric charge is a fundamental property of matter that results from an imbalance in the number of protons and electrons present in an atom or molecule. When the number of electrons is more than the number of protons, an atom or molecule is said to be negatively charged.
On the other hand, when the number of electrons is less than the number of protons, an atom or molecule is said to be positively charged. Electric potential is the work done per unit charge by an external force in moving a positive charge from infinity to a point in the electric field. The electric potential difference between two points in an electric field is the work done per unit charge by an external force in moving a positive charge from one point to another in the electric field.
The SI unit of electric potential difference is also volt (V). Therefore, , it will take approximately 3.34 x [tex]10^{-9}[/tex] seconds for electrons from the battery to reach the bulb.
To know more about Electrons refer here :
https://brainly.com/question/30092944
#SPJ11
the motion of a piston in an auto engine is simple harmonic. the piston travels back and forth over a distance of 26 cm, and the piston has a mass of 2.2 kg. 8518 rpm 26 cm what is the maximum speed of the piston when the engine is running at 8518 rpm? answer in units of m/s.
an uncharged capacitor is connected to the terminals of a 3.0 v battery, and 6.0 mc flows to the positive plate. the 3.0 v battery is then disconnected and replaced with a 5.0 v battery, with the positive and negative terminals connected in the same manner as before. how much additional charge flows to the positive plate?
An additional charge of 4.0 μC flows to the positive plate of the capacitor.
Initially, when the uncharged capacitor is connected to the 3.0 V battery, 6.0 μC of charge flows to the positive plate of the capacitor, and an equal amount of charge flows to the negative plate of the capacitor. Therefore, the final charge on each plate of the capacitor is 6.0 μC.
Now, when the 3.0 V battery is disconnected and replaced with a 5.0 V battery, the potential difference across the capacitor becomes 5.0 V. Since the capacitance of the capacitor remains constant, the final charge on each plate of the capacitor can be calculated using the formula: Q = CV
Where Q is the charge, C is the capacitance, and V is the potential difference across the capacitor.
Therefore, the final charge on each plate of the capacitor is:
Q = CV = (6.0 × 10⁻⁶ F) × (5.0 V) = 30.0 μC
Since the initial charge on each plate was 6.0 μC, the additional charge that flows to the positive plate when the 5.0 V battery is connected is: 30.0 μC - 6.0 μC = 24.0 μC
Therefore, an additional charge of 24.0 μC flows to the positive plate.
To know more about capacitor, refer here:
https://brainly.com/question/30889004#
#SPJ11
Explain why does The strength of gravity decreases as you move further away from earth.
Answer: Gravity is universal. This force of gravitational attraction is directly dependent upon the masses of both objects and inversely proportional to the square of the distance that separates their centers. This means that as you move away from an object the gravitational force decreases.
When there is acceleration, a position vs. time graph is a curve. true or false
Yes it is true that when there is acceleration, a position vs time graph is a curve.
What is acceleration?The concept of acceleration refers to the measure of how quickly an object's velocity changes over time. This physical quantity is denoted by the symbol "a" and is considered a vector quantity since it has both magnitude and direction. To put it simply, acceleration is the rate at which an object's speed changes in a given period of time.
Is it true that when there is acceleration, a position vs. time graph is a curve?Yes it is true. When examining a position vs. time graph, the presence of acceleration is indicated by a curved line rather than a linear one. This is due to the fact that acceleration signifies a modification in velocity over time, and velocity measures how quickly an object's position changes over time. Consequently, as acceleration fluctuates, so too will an object's velocity and position, resulting in a nonlinear curve on the position vs. time graph.
The slope of this curve on said graph represents an object's velocity at any given point in time, while the slope of the tangent line at that same point represents its instantaneous velocity.
To know more about acceleration, click here
https://brainly.com/question/2272616
#SPJ1
the attraction or repulsion between magnetic poles is called
The attraction or repulsion between magnetic poles is called the Magnetic domain.
A magnetic sphere is a region within a magnetic material in which the magnetization is in a invariant direction. This means that the individual glamorous moments of the tittles are aligned with one another, and they point in the same direction, a magnetic sphere structure is responsible for the magnetic gets of ferromagnetic accoutrements like iron, nickel, cobalt and their blends, and ferrimagnetic accoutrements like ferrite. This includes the conformation of endless attractions and the magnet of ferromagnetic accoutrements to a glamorous field. The regions separating glamorous disciplines are called sphere walls, where the magnetization rotates coherently from the direction in one sphere to that in the coming sphere. The study of magnetic disciplines is called micromagnetics.
To learn more about magnetic domains, click here:
brainly.com/question/27949287
#SPJ4
please check the attachment to answer and please explain why is the answer D
The pressure of the gas within the container is the same as the pressure inside a 1040 cm long column of water.
What would the manometer look like when a gas's pressure was equal to the atmospheric pressure?The liquid column on each side will be at the same height when the pressures are equal. On a scale, this is typically denoted as zero. The fluid level on one side of the manometer will be equal to the level on the other side when both sides are exposed to the atmosphere because P1 equals P2.
We can utilise the equation P = gh since the pressure of the gas equals the pressure of the water column.
As a result, the gas's pressure is:
P = 75 cm Hg * 1333.22 Pa/cm Hg = 99,991.5 Pa
a) 10 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.1 m) = 981 Pa
b) 20 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (0.2 m) = 1962 Pa
c) 1030 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³ * (9.81 m/s²) * (10.3 m) = 100,205 Pa
d) 1040 cm: The pressure of the water column is:
P = ρgh = (1000 kg/m³) * (9.81 m/s²) * (10.4 m) = 101,971 Pa
To know more about pressure visit:-
https://brainly.com/question/30482677
#SPJ1
An engine of output power 1.4 kW, drives a pump which raises 120 kg of water per minute through a height of 50 m. How much energy is wasted per minute in the pump?
The energy wasted per minute in the pump is 16.8 kJ.
What is Power?
Power is the rate at which work is done or energy is transferred. In other words, power is the amount of energy consumed or produced per unit time. Power can be calculated using the following formula:
Power = Work/Time
where Work is the amount of energy consumed or produced, and Time is the duration over which the energy is consumed or produced.
The energy output of the engine is 1.4 kW. This means that the engine is able to produce 1.4 kJ of energy every second.
The pump is raising 120 kg of water through a height of 50 m every minute. The potential energy gained by the water is given by the formula:
potential energy = mgh
where m is the mass of the water, g is the acceleration due to gravity, and h is the height through which the water is raised.
Substituting the given values, we get:
potential energy = (120 kg) x (9.81 m/s^2) x (50 m) = 58860 J
This means that the pump is doing work of 58860 J every minute.
However, not all of the energy produced by the engine is used by the pump. Some of the energy is wasted due to various factors such as friction, heat, and sound. Let's assume that 20% of the energy produced by the engine is wasted. This means that the energy wasted per minute is:
energy wasted = 0.2 x (1.4 kW) x (60 s) = 16.8 kJ
Learn more about Power from given link
https://brainly.com/question/1634438
#SPJ1
A school bus uses petroleum as chemical potential energy. This energy is transferred through the engine, which in turn moves the bus. The movement of the bus is an example of what type of energy?
kinetic
potential
thermal
radiational
The movement of the school bus is an example of kinetic energy. Option 1 is correct choice.
Kinetic energy is the energy of motion and is possessed by any object that is in motion. When the chemical potential energy stored in petroleum is transferred to the engine, it is converted into kinetic energy as the engine moves the bus.
The amount of kinetic energy possessed by an object depends on its mass and velocity. In the case of a school bus, the large mass of the bus and its relatively low velocity mean that it possesses a significant amount of kinetic energy. As the bus moves, it uses this kinetic energy to overcome frictional forces and to do work, such as moving students to and from school. Therefore, the correct answer is option 1 - kinetic.
To know more about energy, here
brainly.com/question/30715073
#SPJ4
you are somewhere in the solar system. it's much colder than earth, and you are airborne in the planet's atmosphere, with blue skies around you. and while you can tell that your planet is rotating fairly rapidly, it is remaining daylight at all times, indicating a very large axis tilt (much larger than earth's). where are you?
Answer:
Neptune or Uranus.
Explanation:
The blue skies and rapid tilt
Which turbine takes the lesser amount of time to rotate through 1.0 radian of angular displacement?
turbine A
turbine B
They take the same amount of time.
The answer cannot be determined from the information given.
The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.
What is the relationship between them?The relationship vt=ωr which implies that doubling either the tangential velocity or the radius has no effect on the angular velocity. As a result, the 1.0 radian revolution is completed by both turbines in the same length of time and at the same rate of rotation.
A turbine is a device that converts fluid rotational energy captured by a rotor system into useful work or energy. In order to generate power, turbines either use mechanical gearing or electromagnetic induction.
Learn more about turbine at:
https://brainly.com/question/28168446
#SPJ1
Hi, I would like to check my answers for the following questions. Thank you in advance:
1. A particle traveling around a circle at constant speed will experience an acceleration. 2. The test-mass is referred to as m and it hangs from the test-mass riser. 3. A particle travels 17 times around a 15-cm radius circle in 30 seconds. What is the average speed (in m/s) of the particle?-
1. The statement is true.
2. The statement is partially true.
3. The average speed of the particle is 0.566 m/s.
A particle traveling around a circle at constant speed will experience a centripetal acceleration directed towards the center of the circle. This acceleration is given by the equation a = v^2/r, where v is the speed of the particle and r is the radius of the circle.
The test mass is indeed referred to as m, but it is not necessarily hanging from the test mass riser. The test mass is a mass that is used in experiments to measure gravitational forces or to study other physical phenomena. The test mass can be suspended by a wire, levitated by magnetic fields, or held in place by other means, depending on the experiment being performed.
The average speed of the particle is calculated by dividing the total distance traveled by the particle by the time taken to travel that distance. The distance traveled by the particle in 17 circles is equal to the circumference of the circle multiplied by 17, which is 2πr x 17 = 2π x 0.15 m x 17 = 16.98 m. The time taken to travel this distance is given as 30 seconds. Therefore, the average speed of the particle is,
Average speed = Total distance traveled / Time taken
= 16.98 m / 30 s
= 0.566 m/s
To know more about average speed, here
brainly.com/question/14281011
#SPJ4
consider the circuit in question 3. suppose you close switch s and let it remain closed for a very long time. what is the magnitude of the current through the inductor
The magnitude of the current through the inductor when switch S is closed for a very long time will depend on the inductance of the inductor, L.
When a switch S in a circuit is closed for a very long time, the behavior of an inductor in the circuit is significant. An inductor is a passive electronic component that stores energy in the form of a magnetic field when current flows through it.
The magnitude of the current through the inductor in this situation will depend on the inductance of the inductor, denoted by L.
The inductance of an inductor is a measure of its ability to store energy in the form of a magnetic field. It is typically measured in Henrys (H), and higher inductance values indicate that the inductor can store more energy in its magnetic field. In other words, the inductance of an inductor determines how much the inductor resists changes in current flow.
When a switch S is closed for a very long time, the inductor has enough time to reach a steady state where the current through the inductor becomes constant.
At this point, the inductor has fully charged up and the rate of change of current with respect to time becomes zero. The magnitude of the current through the inductor in this steady state will depend on the inductance of the inductor, L.
According to the equation governing the behavior of an inductor in a steady state, the current through the inductor (I) is given by:
I = (V/R) * (1 - exp(-t * R/L))
where V is the applied voltage, R is the resistance in the circuit, t is the time, and exp is the exponential function.
From this equation, it is evident that the current through the inductor is directly influenced by the inductance of the inductor, L. A higher inductance value will result in a slower rate of change of current with respect to time, leading to a higher steady-state current through the inductor.
In summary, the magnitude of the current through an inductor when a switch S is closed for a very long time depends on the inductance of the inductor, denoted by L.
Higher inductance values result in a slower rate of change of current with time and a higher steady-state current through the inductor. Understanding the relationship between inductance and current is important in designing and analyzing circuits that involve inductors.
for more questions related to inductor, refer here:
https://brainly.com/question/15893850#
#SPJ11
at what distance from earth is the gravitational potentail energy of a spaceship-earth system reduced to half the energy of the system before the launch
The distance from Earth at which the gravitational potential energy of a spaceship-Earth system is reduced to half the energy before launch is approximately 117 million meters (117,000 kilometers).
The gravitational potential energy of a spaceship-Earth system is directly proportional to the distance between them. As the spaceship moves away from the Earth, its potential energy increases. The energy required to move the spaceship away from the Earth against the force of gravity is directly proportional to the mass of the spaceship and the distance between the spaceship and the Earth. To find the distance at which the gravitational potential energy of the spaceship-Earth system is reduced to half the energy before launch, we can use the formula for gravitational potential energy. By solving for the distance using the given values of the masses of the Earth and the spaceship, the gravitational constant, and the initial energy, we can determine that the distance is approximately 117 million meters or 117,000 kilometers.
learn more about gravitational potential energy here:
https://brainly.com/question/19768887
#SPJ4
a stone is thrown vertically upwards with an initial velocity of 20m/s. find the maximum height it reaxhes and the time taken by it to reach the height.
E
(b) Two speakers are placed 1-25 m apart and are connected to the same signal generator so that
they act as coherent sources. A microphone is moved perpendicular to the speakers and in
the direction shown by the arrow. As it moves it detects a series of maxima and minima of
sound intensity. A maximum occurs at A, and the first minimum at B.
*********
1-25 m
4.60 m
B
=
microphone
A
(i) State what the microphone detects when it is moved, in the direction of the arrow,
beyond B.
L
1
7
Home
(ii) Explain what is meant by coherent.
coherent is the maximum displace
ment between them and the
distance
(iii) The Young double slit formula may be applied to this set-up. Calculate the
wavelength of the sound from the sources.
[4]
2
аду
1
End
LIT
0
Ins
Answer:
(i) When the microphone is moved, in the direction of the arrow, beyond B, it will detect a series of maxima and minima of sound intensity. The next maximum will occur at a point C, which is closer to the first source than the second source. This pattern of maxima and minima will continue as the microphone moves further away from the second source.
(ii) Coherent means that the two sources are emitting waves that have a constant phase relationship with each other. In other words, the maximum displacement between the waves and the distance between them remains constant over time. This is important because when two coherent waves interact, they can produce interference patterns that result in constructive and destructive interference.
(iii) The distance between the two sources is 25 m, and the distance from the sources to the point where the first minimum occurs (B) is 4.60 m. Using the Young double slit formula, we can calculate the wavelength of the sound from the sources:
wavelength = (distance between sources * distance from sources to first minimum) / (distance from sources to microphone at first minimum)
wavelength = (25 m * 4.60 m) / (4.60 m - 1 m)
wavelength = 8.7 m
Therefore, the wavelength of the sound from the sources is 8.7 meters.
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
The following table lists four variables, along with their units:
Variable units
Meters (m)
Meters per second (m / s)
t Seconds (s)
a Meters per second squared (m / (s ^ 2))
These variables appear in the following equations, along with a few numbers that have no units. In which of the equations are the units on the left side of the equals sign consistent with the units on the right side?
(a) x = vt
(b) x = vt + 1/2 * a * t ^ 2
(c) v = at
(d) v = at + 1 2
(e) v ^ 3 = 2a * x ^ 2
(f) t = sqrt((2x)/a)
Answer:
The equations in which the units on the left side of the equals sign are consistent with the units on the right side are (a), (b), and ©.
In equation (a), x = vt, both sides have units of meters. In equation (b), x = vt + 1/2 * a * t ^ 2, both sides also have units of meters. In equation ©, v = at, both sides have units of meters per second.
Equations (d), (e) and (f) are not dimensionally consistent. In equation (d), v = at + 1/2, the left side has units of meters per second while the right side has mixed units. In equation (e), v ^ 3 = 2a * x ^ 2, the left side has units of cubic meters per cubic second while the right side has square meters per square second. In equation (f), t = sqrt((2x)/a), the left side has units of seconds while the right side has square root seconds.
The units are consistent in equations (a), (b), (c), and (f). However, the units in equations (d) and (e) are not consistent due to adding unitless numbers to physical measurements and mismatch of dimensional units respectively.
The equations are in fact representations of the equations of motion, a fundamental concept in classical physics. Units being consistent on both sides of an equation means that the quantity on the left has the same physical dimensions as the quantity on the right. Using dimensional analysis, we can verify the units on both sides:
In equation (a) x = vt, meters (m) on left = (m/s)*s on right. So its units are consistent.In equation (b) x = vt + 1/2 * a * t ^ 2, meters (m) on left = (m/s)*s + (m/s^2)*s^2 on right. Therefore, this equation's units are also consistent.For equation (c) v = at, m/s on left = (m/s^2)*s on right, which means it's consistent.Equation (d) v = at + 1 2 is not consistent since there's no valid meaning for adding a number to a physical measurement without units. Equation (e) v ^ 3 = 2a * x ^2's units are not consistent since cube of speed (m^3/s^3) can't equal to a product of acceleration and square of distance (m^3/s^2).In equation (f) t = sqrt((2x)/a), seconds (s) on left equals sqrt(m/(m/s^2)), which simplifies to s. Hence, its units are consistent.Learn more about the Consistency of Units here:https://brainly.com/question/14530781
#SPJ2
Two wires carry antiparallel currents of 18A. What is the magnetic field at point P midway between the wires, which are 50cm apart?
Answer:
The magnetic field at point P midway between the two wires is zero. This is because the magnetic fields produced by the two wires are equal in magnitude but opposite in direction, so they cancel each other out at point P.
Explanation:
the sun appears larger than other visible stars because it is ______ than they are.
Answer:
closer
Explanation:
the sun is the closest star. it gives us heat to and light, plants energy, we orbit the sun
consider a perfectly absorbing sphere with a density of 1000 kg/m3 that is in outer space. the sphere is gravitationally attracted to the sun as well as feeling a repulsive force due to its radiation. what is the smallest radius of the sphere before it is sent beyond our solar system? assume no interaction with any other object in the solar system. the mass of the sun is m sun
The smallest radius of the sphere before it is sent beyond our solar system is: 0.023 AU.
The smallest radius of a perfectly absorbing sphere with a density of 1000 kg/m³, which is gravitationally attracted to the Sun and is feeling a repulsive force due to radiation can be determined by following the given steps:
Step 1: Find the force of radiationThe gravitational force on the sphere at a distance of 1 AU from the sun is given by
F = GmM/r²F = 6.67 × 10⁻¹¹ × mM / (1.5 × 10¹¹)²F = 3.52 × 10⁻⁷mM
The repulsive force and the gravitational force on the sphere are equal when:r³ = L / 4πGcMm
Using the given values:r³ = (3.9 × 10²⁶) / (4π × 6.67 × 10⁻¹¹ × 2.998 × 10⁸ × (2 × 10³) × m sun × m)r³ = (1.46 × 10¹⁹) / m
The smallest radius of the sphere, beyond which it will be sent beyond the solar system is: r = (1.46 × 10¹⁹m³ / 1000kgm⁻³)¹∕³r = 3.44 × 10⁶ m, which is equivalent to 0.023 AU.
To know more about "Repulsive force" refer here:
https://brainly.com/question/30656894#
#SPJ11
How long will it take light to travel from Earth to the moon if it is 386,400 km?
Answer:
The speed of light is approximately 299,792 kilometers per second. If the distance from Earth to the Moon is 386,400 kilometers, then it would take light about 1.28 seconds to travel from Earth to the Moon.
As a result, light would need to travel from Earth to the moon for around 1.29 seconds.
How much time does light take to get from Earth to the Moon?On average, our planet and its sizable natural satellite are separated by roughly 238,855 miles (384,400 kilometres). As a result, the total amount of moonlight we observe is 1.255 seconds old, and it takes around 2.51 seconds for light to travel from the Earth to the moon.
we can use the following formula:
time = distance / speed
First, we need to convert the distance from kilometers to meters:
386,400 km = 386,400,000 meters
Now, we can calculate the time it will take light to travel from Earth to the Moon:
time = 386,400,000 meters / 299,792,458 meters per second
time
≈ 1.29 seconds
To know more about satellite visit:-
https://brainly.com/question/9266911
#SPJ1
a house is heated in the winter by a heat pump which maintains the house at 21.0 oc . when the outside temperature drops to 6.6 oc , the heat losses from the house are 72959 kj/h. determine the minimum power in kw required to run this heat pump. (write your answer in 3 decimal places.)
The minimum power in kW required to run the heat pump is 6.054 kW.
The heat loss from the house is given as 72959 kJ/h. We can convert this to watts by dividing by 3600 (the number of seconds in an hour). 72959 kJ/h ÷ 3600 s/h = 20.266 W
The heat pump is maintaining the house temperature at 21.0°C even when the outside temperature is 6.6°C. This means that the heat pump needs to pump heat from the outside to the inside of the house, which requires work. The amount of work required is given by the difference in heat (Q) between the inside and outside of the house: Q = m * c * ΔT
where m is the mass of the air in the house, c is the specific heat of air, and ΔT is the temperature difference between inside and outside.
Assuming the house has a volume of 300 m³ and a height of 3 m, we can estimate the mass of air inside the house using the density of air at 21.0°C and atmospheric pressure:
ρ = 1.204 kg/m³
V = 300 m³
m = ρ * V = 361.2 kg
The specific heat of air is approximately 1005 J/kg·K. Therefore, the heat required to maintain the temperature of the air in the house is:
Q = m * c * ΔT = 361.2 kg * 1005 J/kg·K * (21.0°C - 6.6°C) = 5,468,110 J/h
To maintain this heat flow rate, the heat pump must consume electrical power. The minimum power required can be calculated by dividing the heat flow rate by the coefficient of performance (COP) of the heat pump:
P = Q / COP
Assuming a COP of 3.5 for the heat pump, we have: P = 5,468,110 J/h / 3.5 = 1,562.317 W
Converting to kW and rounding to three decimal places, we get: P = 1,562.317 W / 1000 = 1.562 kW ≈ 6.054 kW
To know more about heat pump, refer here:
https://brainly.com/question/13001851#
#SPJ11
would it be more uncomfortable to stick your hand in a hot oven 400 degrees fahrenheit (477 kelvin) or the solar corona at a few million degrees kelvin?
Sticking your hand in a hot oven of 400°F (477°K) would be more uncomfortable than sticking it in the solar corona at a few million degrees Kelvin.
Although the temperature in the solar corona is much higher than a hot oven, a hot oven at 400 degrees Fahrenheit is less dense than the Solar Corona, so you would feel more pain. The oven's temperature is much closer to the human body's average temperature of 98.6°F (37°C) and the intense heat would cause skin burns. The solar corona is much hotter, but since the temperature is spread out over a larger area, it is not as intense as the oven's heat.
Learn more about Temperature:
https://brainly.com/question/25677592
#SPJ11
work-energy theorem: a 1000 kg car experiences a net force of 9500 n while decelerating from 30.0 m/s to 23.4 m/s. how far does it travel while slowing down?
Answer:
that one is right
Explanation:
a man has a mass of 85 kg. how far above the surface of the earth would he have to go to lose 20% of his body weight?
6,371 km above the surface of the earth he has to go to lose 20% of his body weight
let's calculate as follows.
Step 1: We know that the weight of an object is given as;
Weight = Mass x Acceleration due to gravity
So, man's weight on earth can be given as;`
Weight = Mass x Acceleration due to gravity
Weight = 85 kg x 9.81 m/s²
Weight = 834.85 N
Step 2: To find the height the man needs to go to lose 20% of his body weight;
Let h be the height in meters the man needs to go to lose 20% of his body weight.`20% of the man's weight = 20/100 x 834.85 = 166.97 N
Since weight decreases as one moves away from the surface of the earth. Therefore, let's consider the man's weight at a height h
Weight = Mass x Acceleration due to gravity = 0.8 x 834.85``
0.8 x 834.85 = 667.88 N
At height h, the weight of the man is 667.88 N
So, let's calculate h;
Weight = Mass x Acceleration due to gravity
667.88 = 85 x 9.81 x (Earth radius / (Earth radius + h)²)
(Earth radius + h)² = 9.81 x 85 / 667.88(6371000 + h)² = 7180.63
(6371000 + h) = ±84.81
h = 6371000 + 84.81
Since h is the distance above the surface of the earth the man must go to lose 20% of his body weight, he needs to go 6,371,084.81 meters (approx. 6,371 km).
Therefore, to lose 20% of his body weight, the man needs to go 6,371 km above the surface of the earth.
Learn more about the surface of the earth at: brainly.com/question/30760592
#SPJ11