Which explains the charge of an ion of calcium (Ca)?

A. 2 electrons are gained by the atom.
B. 2 electrons are removed from the atom.
C. 2 protons are removed from the atom.
D. 2 protons are gained by the atom.

The solubility of KCl at 60 °C in 100 g of water (H2O) can be determined using experimental data or by using a solubility table. The solubility of a substance refers to the maximum amount of that substance that can dissolve in a given amount of solvent at a particular temperature and pressure.

One possible way to determine the solubility of KCl at 60 °C in 100 g of water is to consult a solubility table, which lists the solubility of various substances in water at different temperatures. According to one such table, the solubility of KCl in water at 60 °C is approximately 47 g per 100 g of water.

This means that 100 g of water at 60 °C can dissolve up to 47 g of KCl before becoming saturated, i.e., no more KCl will dissolve in the water at this temperature.

It is important to note that the solubility of KCl (or any substance) in water can be affected by various factors, such as temperature, pressure, and the presence of other solutes. Therefore, the solubility value obtained from a solubility table is only an approximation and may not be accurate for all conditions.

For more details about solubility click here:

https://brainly.com/question/29661360#

#SPJ11

First, we need to calculate the number of moles of aluminum that reacted:

Molar mass of aluminum = 27 g/mol

Number of moles of aluminum = 0.84 g / 27 g/mol = 0.031 mol

According to the balanced chemical equation, 2 moles of aluminum react with 3 moles of chlorine gas to produce 2 moles of aluminum chloride. So, 0.031 moles of aluminum will react with:

0.031 mol Al x (3 mol Cl2 / 2 mol Al) = 0.0465 mol Cl2

Now, we can use the molar gas volume to calculate the volume of chlorine gas used:

Volume of Cl2 = (0.0465 mol Cl2) x (24 dm³/mol) = 1.116 dm³ or 1116 mL (rounded to 3 significant figures)

Therefore, the volume of chlorine gas used in the reaction is 1.116 dm³ or 1116 mL.

The type of soap affects its cleansing ability and dishwasher soap because of the specialized formulation of dishwasher soap, which is specifically designed to remove grease and dirt from dishes.

Here is an experiment that explores the effect of the type of soap on the cleanliness of dishes:

Title: The Effect of Soap Type on Dish Cleaning Performance

Introduction: Soap is a commonly used cleaning agent for removing dirt and grease from various surfaces, including dishes. There are different types of soap available in the market, each with its unique composition and cleaning properties. In this experiment, we will investigate the effect of soap type (shampoo, hand soap, dishwasher) on dish cleaning performance.

Hypothesis: We hypothesize that the type of soap used will have a significant effect on dish cleaning performance, with dishwasher soap being the most effective due to its specialized formulation.

Materials:

Three different types of soap (shampoo, hand soap, and dishwasher soap)

Measuring cup

Three identical dirty dishes

Sink with running water

Stopwatch

Paper towel

Digital scale

Procedure:

Measure out 30 mL of each soap type into separate containers.

Weigh each of the three dirty dishes using a digital scale and record the weights.

Wet one dish in the sink and apply 10 mL of the first soap type to the dish.

Rub the dish with a paper towel for 30 seconds.

Rinse the dish with running water for 10 seconds.

Dry the dish with a paper towel and weigh it. Record the weight and note the cleanliness of the dish.

Repeat steps 3-6 with the remaining two types of soap on the other two dishes.

Repeat steps 3-7 for each soap type two more times with new dirty dishes, for a total of three trials per soap type.

Data Analysis:

Calculate the difference in weight between the dirty and cleaned dishes for each trial.

Calculate the average weight difference for each soap type.

Plot the average weight difference for each soap type on a bar graph.

Analyze the graph to determine the effect of soap type on dish cleaning performance.

Conclusion:

Based on the results of this experiment, we can conclude that the type of soap used has a significant effect on dish cleaning performance. The dishwasher soap was found to be the most effective in cleaning dishes, followed by hand soap and then shampoo.

Learn more about independent variables at: https://brainly.com/question/82796

#SPJ1

The statement "the cage size of the zeolites is in the centimeters scale" is False.

Zeolite is a crystalline and porous alumino-silicate mineral consisting of hydrated alkaline metals and alkali earth metals. These minerals have microporous structures that make them useful in industrial and medical applications, among other things. They have a diverse array of applications, including as catalysts, adsorbents, and molecular sieves. Zeolites are minerals that have a unique framework that is capable of trapping and holding a variety of molecules within their microporous structure.

Zeolites are small in size, typically between 0.3 and 2 microns. The cavities or pores within these crystals, known as cages, are in the range of 4 to 12 Angstroms in size (1 Angstrom = 0.1 nm). These cavities are small, which allows the zeolite to selectively filter molecules based on their size, shape, and chemical properties.}

Learn more about Zeolite: https://brainly.com/question/27174988

#SPJ11

The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.

A more detailed explanation of the answer.

To find the concentration of Ni2+ ions at equilibrium, we need to use the formation constant (Kf) of Ni(NH3)6 2+ and perform an ICE table (Initial, Change, Equilibrium) calculation. The given Kf value is 5.5×10⁸.

Student question: What is the concentration of Ni2+ ions at equilibrium when 0.160 moles of NiCl2 are added to a liter of 1.20 M NH3 solution?

1. Balanced equation for the reaction:
Ni2+ + 6 NH3 <=> Ni(NH3)6 2+

2. Create the ICE table:

|     | Ni2+ | NH3   | Ni(NH3)6 2+ |
|-----|------|-------|------------|
| I   | 0.16 | 1.20  | 0          |
| C   | -x   | -6x   | +x         |
| E   | 0.16-x | 1.20-6x | x      |

3. Write the expression for Kf:
Kf = [Ni(NH3)6 2+]/([Ni2+][NH3]⁶) = 5.5×10⁸

4. Substitute the equilibrium values from the ICE table:
5.5×10^8 = (x)/((0.16-x)(1.20-6x)⁶)

5. Since Kf is very large, we can assume that x (change in concentration) is very small compared to the initial concentrations. Thus, we can approximate 0.16-x ≈ 0.16 and 1.20-6x ≈ 1.20.

6. Simplify and solve for x:
5.5×10⁸ = (x)/((0.16)(1.20)⁶)
x ≈ 4.4×10⁻⁹ M

The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.

Learn more about constant (Kf).

brainly.com/question/30092497

#SPJ11

The colors of red litmus paper in acidic, neutral, and basic solutions are: C. red, colorless, and blue respectively.

Red litmus paper is used to test whether or not a solution is acidic in chemistry. It's utilized to detect the acidity or alkalinity of a substance. In acidic or neutral solutions, red litmus paper remains red. It will turn blue when it comes into contact with basic solutions. Red litmus paper is a pH indicator. It alters color based on the pH of the substance in which it is dissolved.

Litmus paper is a pH paper that is produced using lichen dyes. It's a paper that has been treated with litmus, which is a water-soluble mixture of different dyes obtained from lichens. Litmus paper's two colors, blue and red, are produced from litmus. The blue litmus paper turns red in acidic solutions and turns blue in basic solutions. Conversely, red litmus paper turns blue in basic solutions and remains red in acidic or neutral solutions. Therefore, Option C is Correct.

The Question was Incomplete, Find the full content below :

The colours of red litmus paper in acidic, neutral, and basic solutions are:

A. red, orange and blue respectively

B. blue, violet and red respectively

C. red, colourless and blue respectively

D. red, red and blue respectively

Know more about Red litmus paper here :

https://brainly.com/question/20163204

#SPJ11

The order of increasing reactivity of the following alkyl halides in an E2 reaction is (CH3)2C(Br)CH2CH2CH3 < Intermediate reactivity, (CH3)2CHCH2CH(Br)CH3 < Highest reactivity, (CH3)2CHCH2CH2CH2Br < Lowest reactivity.

In an E2 reaction, the rate of reaction is affected by the size and the polarizability of the leaving group, the bulkiness of the alkyl groups, and the steric hindrance. In this case, the size and polarizability of the leaving group increases from (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH(Br)CH3 < (CH3)2CHCH2CH2CH2Br, making the reactivity increase in the same order.

The bulkiness of the alkyl groups has the opposite effect; the bulkier the alkyl groups, the lower the reactivity of the alkyl halide. The alkyl groups in the compounds are in the order (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH2CH2Br < (CH3)2CHCH2CH(Br)CH3, making the reactivity increase in the reverse order.

Lastly, steric hindrance affects the rate of reaction as well. The steric hindrance decreases from (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH(Br)CH3 < (CH3)2CHCH2CH2CH2Br, leading to the highest reactivity of (CH3)2CHCH2CH(Br)CH3.

Overall, this leads to the order of reactivity (CH3)2C(Br)CH2CH2CH3 < Intermediate reactivity, (CH3)2CHCH2CH(Br)CH3 < Highest reactivity, (CH3)2CHCH2CH2CH2Br < Lowest reactivity.

To know more about alkyl halides refer here:

https://brainly.com/question/28384269#

#SPJ11

Complete Question:

rank the following alkyl halides in order of increasing reactivity in an E2 reaction. Be sure to answer all parts

1. (CH3)2C(Br)CH2CH2CH3

2. (CH3)2CHCH2CH(Br)CH3

3. (CH3)2CHCH2CH2CH2Br

lowest reactivity: ?

Intermediate reactivity: ?

Highest reactivity: ?

The solubility of strontium sulfate, SrSO₄ in 0.36 M sodium sulfate, Na₂SO₄ solution is approximately 1.06 x 10⁻⁶ M.

Solubility is the maximum amount of solute that can dissolve in a solvent at a given temperature and pressure to form a saturated solution.

The solubility of strontium sulfate (SrSO₄) in a 0.36 M sodium sulfate (Na₂SO₄) solution can be calculated using the solubility product constant (Ksp) and the common ion effect. The Ksp of SrSO₄ is 3.80 x 10⁻⁷. To find the solubility of SrSO₄, we can set up an expression using the Ksp value and the concentration of Na₂SO₄:

Ksp = [Sr²⁺][SO₄²⁻]

Since Na₂SO₄ dissociates into 2 Na⁺ ions and 1 SO₄²⁻ ion, the initial concentration of SO₄²⁻ ions from Na₂SO₄ is 0.36 M. Let x be the solubility of SrSO₄, then:

3.80 x 10⁻⁷ = [x][(0.36 + x)]

As x is significantly smaller than 0.36, we can assume x is negligible in the equation:

3.80 x 10⁻⁷ ≈ [x][0.36]

Solving for x:

x ≈ 1.06 x 10⁻⁶ M

Thus, the solubility of SrSO₄ in a 0.36 M Na₂SO₄ solution is approximately 1.06 x 10⁻⁶ M.

Learn more about Solubility here: https://brainly.com/question/23946616

#SPJ11

In this case, the correct reaction showing how FeCO3 has increased solubility when forming the complex ion Fe(CN)64- is B) FeCO3 (s) + 6 CN- (aq) <-> Fe(CN)64- (aq) + CO32- (aq). So, the correct option is B.

This reaction shows that when FeCO3 is combined with six CN- ions, it forms the complex ion Fe(CN)64-, which is soluble in water. This increases the solubility of FeCO3. The reaction also produces CO32-, which is also soluble in water. There is no increased solubility in FeCO3 when forming the complex ion Fe(CN)64- in all other options. Therefore, the correct answer is option B.

You can learn more about complex ions at: brainly.com/question/31059600

#SPJ11

The reaction rate will decrease in the second experiment when the concentration of both compounds is lowered. This is because the rate of a chemical reaction is directly proportional to the concentration of the reactants.

The rate of a chemical reaction is directly proportional to the concentration of the reactants.

This is because increasing the concentration of the reactants increases the number of reactant molecules available to collide with each other, which results in a faster reaction rate.

Other factors that can affect the rate of a chemical reaction include temperature, pressure, the presence of a catalyst, and the surface area of solid reactants. Increasing temperature, pressure, or the surface area of solid reactants generally leads to a faster reaction rate, while the presence of a catalyst can increase the rate of a reaction without being consumed in the process.

To know more about compound,visit:

https://brainly.com/question/13516179

#SPJ1

The given statement "radioactive decay is a first-order kinetic process" is true because the number of radioactive nuclei that decay per unit time is proportional to the number of radioactive nuclei present.  

Radioactive decay is a natural process by which the unstable atomic nucleus loses energy by emitting radiation. This results in a change in the composition of the atomic nucleus, which is accompanied by a release of energy. The three types of radiation that can be emitted during radioactive decay are alpha particles, beta particles, and gamma rays.

Alpha particles are positively charged particles consisting of two protons and two neutrons, beta particles are negatively charged particles emitted by certain radioactive isotopes, and gamma rays are high-energy photons emitted by atomic nuclei during radioactive decay.

First-order kinetics is a type of chemical reaction in which the rate of reaction depends only on the concentration of one reactant. In other words, a first-order reaction is one in which the rate of reaction is proportional to the concentration of the reactant raised to the power of one. This means that the rate of reaction increases linearly with the concentration of the reactant. First-order kinetics is commonly observed in chemical and biochemical systems, as well as in radioactive decay.

In radioactive decay, the number of radioactive nuclei that decay per unit time is proportional to the number of radioactive nuclei present. This property of radioactive decay is called first-order kinetics.

Therefore, the given statement is true.

To learn more about "radioactive decay", visit: https://brainly.com/question/9932896

#SPJ11

The passage data regarding the thermal stability and the enzyme activity of the mkr681h is the most consistent with the conclusion regarding the role of Arg681 in the cct is the Arg681 is the engaged in catalytic function of enzyme.

The R681H is denotes that the amino acid 681 that is the arginine, R is the changed to the histidine (H). The Enzyme activity will depends on the principally on the enzyme’s intrinsic catalytic efficiency, and its concentration, and the initial substrate concentration, in the presence of the inhibitors or the allosteric activators, the temperature, and the pH.

This will most strongly suggests that the Arg681 will be involved in the catalytic function of  normal enzyme.

To learn more about enzyme here

https://brainly.com/question/29819864

#SPJ4

You need 163.8 mL of concentrated sulfuric acid (18M) to prepare 9.0 L of a 1.00M solution.

The given problem can be solved using the molarity equation which is:
Molarity (M) = moles of solute (n) / liters of solution (L)
The balanced chemical equation for sulfuric acid (H2SO4) is:H2SO4 → 2H+ + SO42
The molecular weight of H2SO4 is 98g/mol.
Hence, 18M H2SO4 solution contains 98g/Liter.98g / 18M = 5.44 g/mL5.44 g/mL x 1000 mL/L = 5440 g/L5440 g / 98 g/mol = 55.102M
Concentrated sulfuric acid is 18M.

So, the volume of concentrated sulfuric acid (18M H2SO4) that is needed to prepare 9.0 L of 1.00M solution can be determined as follows:
Number of moles of H2SO4 in 9.0 L of 1.00M H2SO4 solution = 1.0 mol/L × 9.0 L = 9.0 mol
Total number of moles of H2SO4 in the final solution (1.00M) can be calculated as:9.0 mol / 55.102 mol/L = 0.1638 L = 163.8 mL (rounded to 2 decimal places)Therefore,

To know more about "Sulfuric acid" refer here:

https://brainly.com/question/1107054#

#SPJ11

If an air mass is rising, it must be less dense than the surrounding air.

If air mass is rising, it must be less dense than the surrounding air.

This is because when air rises, it is moving into an area of lower pressure than its initial location, which implies that there must be less air above it. Less air above means less weight above, hence resulting in lower density.

The less dense air mass will continue to rise until it reaches an altitude where it is equal in density to that of the surrounding air. This rising motion can lead to cloud formation and potentially precipitation, all depending on the moisture content of the air mass.

To know more about air mass, refer

https://brainly.com/question/26209372

#SPJ1

The term "civic engagement" describes people actively participating in their communities and society as a whole. The lack of water scarcity in many areas of the world is a serious problem brought on by causes including population increase, climate change, and pollution.

In response to changing supply and demand throughout time, water availability varies. As demand rises and/or the amount or quality of the water supply declines, there is an increase in water scarcity.

When there is a water shortage, the primary issue is that people cannot get fresh, clean drinking water. The human body can only exist for a very short time without water, and not drinking other issues with water are covered in the section below.

To know more about climate change visit:-

https://brainly.com/question/28257810

#SPJ1

Question:

What is civic engagement in 150 words?

What are your tips on water scarcity?

The molar mass of an unknown gas that effuses through an opening at a rate of 3.16 times slower than neon gas is 199.6 g/mol.

The unknown gas effuses through an opening at a rate 3.16 times slower than neon gas. We need to estimate the molar mass of this unknown gas.

According to Graham's Law, the rate of effusion is inversely proportional to the square root of the molecular mass of the gas. The effusion rate is given for both neon and the unknown gas, thus we can say that the ratio of the effusion rates is equal to the ratio of the square roots of their molecular masses.

Let M₁ and M₂ be molar masses of the unknown gas and Neon gas respectively. Then the ratio of the effusion rates would be,

R₂/R₁ = √M₁/√M₂

Where R₁ and R₂ are the rates of effusion of the unknown gas and Neon gas respectively.

It is given that the effusion rate of the unknown gas is 3.16 times slower than that of Neon gas.

So, R₁ = 1/3.16 * R₂ or R₂ = 3.16 R₁

Putting these values in the above equation and squaring both sides, we get:

M₁/M₂ = (3.16R1/R1)²

M₁/M₂ = 9.98

M₁ = 9.98 × M₂

Now, the molar mass of Neon is 20g/mol (Neon is monoatomic and its atomic mass is 20).

We can substitute this value to find out the molar mass of the unknown gas.

M₁ = 9.98 × 20

M₁ = 199.6 g/mol

Hence, the estimated molar mass of the unknown gas is 199.6 g/mol.

To know more about molar mass, refer here:

https://brainly.com/question/14268211#

#SPJ11

The volume of a gas will increase if the number of moles of gas is quadrupled at constant pressure and temperature: the volume of the gas will also increase four times its original volume.

This can be explained using the Ideal Gas Law, which states that the volume of a gas is proportional to the number of moles of gas when pressure and temperature remain constant. Therefore, if the number of moles of gas is increased by a factor of four, the volume of the gas will also increase by a factor of four.

To understand this concept better, let us consider the following example. Let us assume that there is a certain amount of gas, A, which contains one mole of gas at a constant pressure and temperature. This gas will occupy a certain volume, V1.

If the number of moles of gas is quadrupled to four moles, the volume of the gas will become four times the original volume, V2. Therefore, the volume of the gas, V2, is four times the original volume, V1.

This example demonstrates that if the number of moles of gas is increased at constant pressure and temperature, the volume of the gas will also increase proportionately. Therefore, if the number of moles of gas is quadrupled at constant pressure and temperature, the volume of the gas will also increase four times its original volume.

To know more about pressure refer here:

https://brainly.com/question/28907914#

#SPJ11

According to Avogadro's Law, at constant temperature and pressure, the volume of a gas is directly proportional to the number of moles of gas. Therefore, if the number of moles of gas is quadrupled while keeping the temperature and pressure constant, the volume of the gas will also quadruple.

Mathematically, we can express this relationship as:

V ∝ n

where V is the volume of the gas, n is the number of moles of the gas, and the symbol ∝ means "is proportional to".

If we quadruple the number of moles of gas, then we have:

n' = 4n

where n' is the new number of moles of gas, and n is the original number of moles of gas.

Using the relationship between volume and number of moles, we can write:

V' ∝ n'

Substituting n' = 4n, we get:

V' ∝ 4n

Simplifying, we get:

V' = 4V

Therefore, if the number of moles of gas is quadrupled at constant pressure and temperature, the volume of the gas will also quadruple.

For more details about Avogadro's click here:

https://brainly.com/question/11907018#

#SPJ11

The statement "Metallic behavior correlates with large atomic size and low ionization energy. Thus, metallic behavior increases down a group and decreases from left to right across a period" is true.

The statement is true because metallic behavior correlates with large atomic size and low ionization energy. So, as you go down a group, the atomic size and ionization energy decrease, resulting in increased metallic behavior. As a result, when going from left to right across a period, the atomic size decreases, and the ionization energy increases, resulting in a decrease in metallic behavior.

As a result, the metallic behavior increases down a group and decreases from left to right across a period.

For more question on ionization energy click on

https://brainly.com/question/30831422

#SPJ11

In the experiment, sodium bisulfite (NaHSO3) in water is used to destroy any unreacted bromine (Br2) or to trap the Br2 and not allow it to escape from the reaction setup. The reaction is shown below but cannot be described using conventional organic curved-arrow pushing.

The resulting mixture is placed in acid waste for the following reasons:

Sodium bisulfite's addition to the reaction mix in the procedure is done to destroy any unreacted bromine (Br2) or to trap the Br2 and prevent it from escaping the reaction setup. Following the reaction, it is necessary to neutralize the mixture with sodium carbonate or another base. After that, the neutralized mixture should be properly disposed of in an acid waste container. Thus, the resulting mixture is placed in acid waste.

Sodium bisulfite is used in excess to the amount of bromine to ensure that all of the bromine is captured or reacted. The resulting mixture is extremely acidic as a result of the reaction. As a result, the mixture must be neutralized before being disposed of.

The most straightforward approach to neutralizing it is to add a basic substance like sodium carbonate, which reacts with the acidic mixture to create water and sodium sulfate (Na2SO4).

As a result, when sodium bisulfite is added in the procedure, the resulting mixture is put into acid waste.

To know more about "Sodium bisulfite" refer here:

https://brainly.com/question/14653628#

#SPJ11

The mass of [tex]SO_3[/tex] produced by reacting 6.3g of [tex]SO_2[/tex] with oxygen in the synthesis reaction is 7.875g.

Given the mass of [tex]SO_2[/tex] reacted = 6.3g

[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]

We can see that 2 moles of [tex]SO_2[/tex] produce 2 moles of [tex]SO_3[/tex].

The mole ratio of [tex]SO_2[/tex] : [tex]SO_3[/tex] = 1 : 1

The molar mass of Sulfur dioxide = 64g/mol.

The number of moles of Sulfur dioxide reacted = 6.3/64 = 0.098mol

Since the mole ratio is 1 the moles of [tex]SO_3[/tex] produced = 0.098

The molar mass of Sulfur trioxide = 80g/mol

The mass of [tex]SO_3[/tex] produced = 0.098 * 80 = 7.875g

To learn more about moles click here https://brainly.com/question/26416088

#SPJ1

The Ka for the weak acid is 2.45 x 10^-6 of concentration 0.0102m .

To calculate Ka, first, we need to calculate the concentration of H+ and the initial concentration of acid. The weak acid is monoprotic, meaning it can donate only one hydrogen ion (H+) to water.Therefore, it will dissociate as follows: HA + H2O ⇔ A- + H3O+where HA is the acid molecule, and A- is its corresponding conjugate base.

The H3O+ is also known as a hydronium ion. The first step is to calculate the concentration of H3O+.The pH of the solution is 2.68.Hence, pH = -log[H3O+]2.68 = -log[H3O+][H3O+] = 1.58 x 10^-3The concentration of H3O+ is 1.58 x 10^-3 M. Since the weak acid is monoprotic, the initial concentration of acid is equal to the concentration of the conjugate base of the weak acid, which we get from the dissociation equilibrium.

The equilibrium expression for the dissociation of a weak acid is given as follows: Ka = [A-][H3O+]/[HA]We need to find the value of Ka. We have already calculated the value of [H3O+].So, Ka = [A-][1.58 x 10^-3 M]/0.0102 MWe need to calculate the value of [A-].

From the equilibrium equation for weak acid: HA + H2O ⇔ A- + H3O+0.0102 M x1.58 x 10^-3 M Here, x is the concentration of A-.So, 1.58 x 10^-3 M = x, which is also the concentration of the conjugate base of the weak acid. So, Ka = [A-][H3O+]/[HA] = (1.58 x 10^-3 M)^2/0.0102 M= 2.45 x 10^-6Therefore, Ka for the weak acid is 2.45 x 10^-6.

for more such questions on  concentration .

https://brainly.com/question/14544663

#SPJ11

The long will the reaction will take to reduce the concentration of to the 50% of its original value is 1386 sec. The option A is correct.

The expression is as :

d[N₂O₅] / dt = -0.0005 [N₂O₅]

[N₂O₅] (t) = [N₂O₅] (0) . e^-0.0005t

[N₂O₅](t) = Ce^-0.0005t

The reaction concentration of to the 50% of its original value is 0.5 C

0.5 C = Ce^-0.0005t

By dividing both side by C

0.5 = e^-0.0005t

Now taking the natural logarithm on the both side, we get

ln0.5 = lne^-0.0005t

ln 0.5 = - 0.0005t

t = - 0.693 / - 0.0005

t = 1386 sec

The time taken is 1386 sec. The correct option is A.

To learn more about reaction here

https://brainly.com/question/15709670

#SPJ4

Thus question is incomplete, the complete question is :

Experiments show that if the chemical reaction N2O5→2NO2+1/2O2, takes place at 45°C, the rate of reaction of dinitrogen pentoxide is proportional to its concentration as follows: -d[N2O5]/dt = 0.0005[N2O5] How long will the reaction take to reduce the concentration of N2O5 to 50% of its original value? select the correct answer. question 4 options:

A) t = 1386 sec

B) t = 211 sec

C) t = 2345 sec

D) t = 111 sec

The percent yield of a reaction is calculated by taking the amount of product produced and dividing it by the amount of reactant used, and then multiplying by 100 to get a percentage.

In this case, 55.0 g of ethene was produced from 100.0 g of ethanol, so the percent yield is 55.0 g divided by 100.0 g, multiplied by 100, which gives a percent yield of 55%.

This percent yield indicates the efficiency of the reaction, as the higher the percent yield, the more efficient the reaction is. A percent yield of 55% means that the reaction was relatively efficient, as the large majority of the reactant was converted into product. If the percent yield was much lower than this, it could indicate that there were some issues with the reaction and that it was not as efficient as it could be.

Know more about ethanol here

https://brainly.com/question/25002448#
#SPJ11

The solution now has a concentration of 0.113 M.

When a solution is diluted, the amount of solute remains the same, but the volume of the solution increases. Therefore, the concentration of the solution decreases.

In this case, 100.0 mL of a 0.565 M solution of KBr is diluted to a total volume of 500.0 mL. The amount of KBr in the original solution can be calculated as follows:

amount of KBr = concentration x volume = 0.565 mol/L x 0.1000 L = 0.0565 moles

When this solution is diluted to a volume of 500.0 mL, the amount of KBr remains the same:

amount of KBr = 0.0565 moles

The new concentration of the solution can be calculated using the following equation:

new concentration = amount of solute / new volume

new volume = 500.0 mL = 0.5000 L

new concentration = 0.0565 moles / 0.5000 L = 0.113 M

Therefore, the new concentration of the solution is 0.113 M.

To learn more about concentration refer to:

brainly.com/question/10725862

#SPJ4

To calculate the moles of anhydrous salt, divide the molar mass by the molar mass of the anhydrous salt.

The molar mass of an anhydrous salt is the sum of the molar mass of each of its components.

To determine the smallest whole number ratio of moles of water to moles of anhydrous salt, divide the number of moles of water by the number of moles of anhydrous salt.

Learn more about moles - brainly.com/question/24748125

#SPJ11

Answer: A

Explanation: An exothermic reaction generates heat. Unless the reaction is cooled in some way, its temperature increases. If you increase the temperature with an external heater, it slows the reaction down or reverse its direction.