which force affect the aeroplane and ship​

If the index of refraction of a refractive medium slows the light to 1.88 x 10^8 m/s. The index of the second medium is: 1.60.

Using this formula to find the index of the second medium

n = c/v

Where:

n = refractive index of the medium
c = velocity of light in vacuum

v = velocity of light in the medium.2

Let plug in the formula

n = (3 x 10^8 m/s)/ 1.88 x 10^8 m/s

n = 300,000,000/188,000,000

n = 1.595

n = 1.60 (Approximately)

Therefore we can conclude that the  refractive index of the medium is 1.60.

Learn more about  refractive index of the medium here:https://brainly.com/question/12768121

#SPJ1

The probability that a particular nucleus of Element A will decay between 5 and 10 hours is 0.7, and the probability that a particular nucleus of Element A will decay between 5 and 20 hours is 0.9.

What is nucleus?

Nucleus is a fundamental subatomic particle which is present in the atoms of all chemical elements. It is composed of protons and neutrons and is the heaviest and most densely packed constituent of atoms. It is the core of an atom, and it is the positive charge that attracts the electrons, which are negatively charged particles. The nucleus is surrounded by a cloud of electrons which determine the properties of the atom and its chemical behavior. The size of the nucleus is typically around one hundred-thousandth of the diameter of the atom. It is held together by strong nuclear forces and has a diameter of around 10-15 femtometers.

To learn more about nucleus

https://brainly.com/question/1268608

#SPJ4

The probability that a particular nucleus of Element A will decay between 5 and 10 hours is 1/2 and the probability that a particular nucleus of Element A will decay between 5 and 20 hours is 7/8.

The total number of identical nuclei present in the nucleus affects how likely it is that the nucleus will disintegrate per second in a radioactive sample. Each nucleus breaks down on its own, regardless of any external factors. Consequently, the likelihood of nuclei disintegrating is the same.

The expression for the disintegration equation is given by

N(t) = N₀[tex]e^{-\lambda t}[/tex]            .... (1)

The half-life of the particle for 5 hours is given by

N(5) = N₀/2

Substitute in equation (1) to get

N₀[tex]e^{-\lambda t}[/tex] = N₀/2

[tex]e^{-\lambda t}[/tex] = 1/2

λ = ln2/5

The half-life of a particle for 10 hours is given by

N(10) = N₀/4

N₀[tex]e^{-\lambda t}[/tex] = N₀/4

[tex]e^{-\lambda t}[/tex] = 1/2

λ = ln4/10

The probability of disintegration is given by:

P = N(5) - N(10)/N(5)

Substitute the values, to get

P = (N₀/2 - N₀/4)/(N₀/2)

= (N₀(2-1)/4)/ N₀(1/2)

= 1/2

The probability of element decay between 5 to 10 hours is 1/2.

Now, the half-life of a particle for 20 hours is given by

N(20) = N₀/16

N₀[tex]e^{-\lambda t}[/tex] = N₀/16

[tex]e^{-\lambda t}[/tex] = 1/16

λ = ln16/20

The probability of disintegration is given by:

P = N(5) - N(1\20)/N(5)

Substitute the values, to get

P = (N₀/2 - N₀/16)/(N₀/2)

= (N₀(8-1)/16)/ N₀(1/2)

= 7/8

The probability of element decay between 5 to 20 hours is 7/8.

To learn more about the probability of disintegration, visit:

https://brainly.com/question/29977960

#SPJ4

Answer:

I think

C- It's a greenhouse gas

Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.

When a current, or flow of charge, must pass through a sequence of devices, resistors are used. For instance, if a person holding a screwdriver allows current to flow through them and into the Earth, then

Resistors are connected in series to a voltage source. Given that the current must flow sequentially through each resistor, it makes sense that the total resistance is equal to the sum of the individual resistances.

This fact would be helpful to someone trying to prevent an electrical shock since they could wear high-resistance rubber-soled shoes to lower the current.

Therefore, Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.

To learn more resistance, refer to the link:

https://brainly.com/question/29427458

#SPJ1

Nonsense mutations are those point mutations in the DNA where stop codons will appear before the time they should appear.

At the time of transcribing from DNA to RNA, the template needs to have both start and stop codons for the transcription to occur correctly, but sometimes mutations can occur that do not allow the protein to be produced correctly. This mutation can be permanent which causes damage to the formation of proteins.Sometimes mutations can be beneficial, allowing evolution and helping organisms to be better formed for a new environment.

It is the type of mutation in which a termination codon occurs before the time it should be, instead of giving a codon with a certain amino acid. Which gives a much shorter protein than it should be, giving a non-functional protein.

To learn more about mutation visit: https://brainly.com/question/17130462

#SPJ1

Ranking each of the following from least to greatest in terms of the amount of momentum each possesses:

A 5 kg object moving at -25 m/s < A 100N object moving at 5 m/s < A 10kg object moving at 10 m/s < A 30 kg moving at 5 m/s

Momentum is the product of a particle's mass and velocity. The fact that momentum is a vector quantity means that it has both magnitude and direction. The force pushing a particle has an equal-and-opposite impact on the speed at which its momentum changes, according to Isaac Newton's second law of motion. Take a look at Newton's laws of motion.

Newton's second law states that if a particle experiences a constant force for a predetermined period of time, the impulse—which is equal to the force multiplied by the duration—will equal the change in momentum. The amount of time required for a consistent force to bring a particle to rest, in contrast, is measured by a particle's momentum.

We know that momentum, p = mv

Where,

p = momentum

m = mass

v = velocity

Substituting the value in formula we get,

1. A 10kg object moving at 10 m/s

p = 10 × 10

  = 100 kg⋅m/s

2. A 30 kg moving at 5 m/s

p = 30 × 5

  = 150 kg⋅m/s

3.  A 5 kg object moving at -25 m/s

p = 5 × -25

  = -125 kg⋅m/s

4. A 100N object moving at 5 m/s

p = (100 × 0.10197 kg) × 5

  = 10.197  × 5

  = 50.985 kg⋅m/s

Learn more about Momentum

https://brainly.com/question/24030570

#SPJ4

The velocity of the hammer of mass 1.9 kg is 11.07 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the hammer, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

Answer:

Velocity of ball = 2.90 meter per second (Approx.)

Explanation:

Given:

Distance travel by ball = 1.3 meters

Time taken by ball = 0.45 seconds

Find:

Velocity of ball

Computation:

Velocity = Total displacement / Total time taken

Velocity of ball = Distance travel by ball /Time taken by ball

Velocity of ball = 1.3 / 0.45

Velocity of ball = 2.889

Velocity of ball = 2.90 meter per second (Approx.)

The required equation for torque used for lever arm r and F for force is given as τ = |r| |F| sinθ.

A simple way to calculate the magnitude of the torque is to first determine the lever arm and then multiply by the times of applied force.

The lever arm is described as the perpendicular distance from axis of rotation to the line of action of force.

The equation used to calculate torque is , τ = r × F = |r| |F| sinθ

where,

r is the magnitude of lever arm

F is the magnitude of force vector

θ is the angle between lever arm and force vectors

To know more about torque:

https://brainly.com/question/29271618

#SPJ4

Answer:

I would say the answer is A... but I'm not so sure ....

Answer:

The Answer is (B)

Explanation:

Answer:

hlfzuprsuo4sljfxuptdpi5ekcg

Answer:

The acceleration becomes zero as it stops. It no longer moves

If a circular motion is accelerated, it will undoubtedly have a high Turning at a rapid rate.

When an object travels along a circular path at a constant speed, it is said to be in uniform circular motion (UCM).So because object's direction was constantly shifting, the velocity doesn't really remain constant along with the speed.To maintain a circular course, the object must speed up toward the the circle's center.

As the particle moves in a circle, its direction of acceleration is continuously changing since it is continually moving toward the center.As a result, it is variable.

To know more about large acceleration visit:

https://brainly.com/question/773522

#SPJ4

Accenture can assist its clients in being more sustainable thanks to the myNav. By making it easier to create cloud solutions that lower carbon emissions by rearranging manufacturing facilities such that carbon emissions can be calculated with ease.

by establishing new corporate efforts to lower transportation expenses and by establishing new rules for the disposal of out-of-date technology.

Accenture can assist its clients in becoming more sustainable by using mynav to locate, assess, architect, and simulate an end-to-end solution at scale.

reduces the expense of transportation

creates a design that is appropriate and aids the customer in becoming more sustainable.

establishes sustainable guidelines for disposing of outdated technology.

Green Cloud Advisor starts by establishing a baseline for the energy usage, compute needs, and sustainability objectives of current data centers. through promoting the development of cloud technologies that cut down on carbon emissions

by reconfiguring factories so that carbon emissions may be easily measured

by implementing creative business techniques to reduce the cost of transportation

by creating new regulations for removing outdated technologies.

To learn more about Accenture's sustainable software engineering from given link

https://brainly.com/question/26449898

#SPJ4

At the instant when a mass is at its equilibrium position when undergoing simple harmonic motion, its instantaneous velocity is its maximum.

Therefore the answer is C. At equilibrium, its instantaneous velocity is at maximum

The simple harmonic motion is periodic motion that oscillates around an equilibrium position. At the equilibrium position, the net force on the mass is zero. Therefore, the mass is not accelerating, so its instantaneous acceleration is zero.

The motion is periodic, meaning it repeats itself at regular intervals of time. In the case of a mass on the end of a spring, the spring exerts a force on the mass that acts to bring it back to its equilibrium position. When the mass is at the equilibrium position, the spring force is zero, and the mass is not accelerating. Therefore, the acceleration is maximum at it ends and decreases to zero at equilibrium position.

The instantaneous velocity is zero at the end as it changes direction of motion, though the acceleration is decreasing from end position to equilibrium, velocity is increasing. The instant after equilibrium position, the acceleration is in opposite direction decreasing the velocity till it is zero at the end position.

To know more on SHM

https://brainly.com/question/29183311

#SPJ4

Answer:

The more time goes on the higher in meters. So most likely more time = closer to terminal velocity. -hope this helps.

The new electrostatic force between the charges, given that q₁ is reduced to 1/2q₁ and q₂ is tripped is 3/2Fₑ (Option C)

First, we shall determine the initial electrostatic force between the charges. Details below:

F = Kq₁q₂ / r²

Fₑ = Kq₁q₂ / r²

Finall, we shall determine the new electrostatic force. The is illustrated below:

F = Kq₁q₂ / r²

F = (K × 1/2q₁ × 3q₂) / r²

F = 3/2Kq₁q₂ / r²

But,

Fₑ = Kq₁q₂ / r²

Thus

F = 3/2Fₑ

Thus, we can conclude that the new electrostatic force is 3/2Fₑ (Option C)

Learn more about force between charges:

https://brainly.com/question/28569085

#SPJ1

W=mg=(3)(9.8)=29.4N is the balance measurement for an airborne body. Scales of this kind include spring balances and newtons meters. They are frequently used to gauge the amount of force applied to an object.

The spring balance operates according to Hooke's law. According to Hooke's law, a material's strain will increase in direct proportion to its applied stress up to its elastic limit.

A straightforward and affordable way of measuring mass is offered by spring balances. The mass is suspended from a spring, and the spring's bending caused by the mass's downward gravitational pull is gauged against a scale.

To know more about spring balances visit :-

https://brainly.com/question/1597448

#SPJ4

The correct answer is D) Before the mechanic left, the molecules were moving in place. When she returned, they were moving around each other. The change in phase from solid to liquid is due to a change in the motion of molecules.

Molecules are formed when two or more atoms come together and form a chemical bond. Molecules exist in all forms of matter and are the building blocks of all living organisms. Molecules can range in size from the very small, such as hydrogen, to the very large, such as proteins. Generally, molecules are composed of two or more atoms of the same element or different elements that are held together by chemical bonds. Molecules can also be composed of multiple subatomic particles, such as protons and neutrons, which form the nucleus of an atom. Molecules may also contain electrons, which are held in orbit around the nucleus by electrostatic forces. Molecules can have different shapes depending on the arrangement of their constituent atoms. Molecules are essential to all forms of life, as they are responsible for many of the physical and chemical processes that take place in living organisms.

To learn more about molecules
https://brainly.com/question/23080116
#SPJ1

Answer:

5 grams

Explanation:

15 hours = one half-life

a half-life is the time taken for the radioactive substance to reduce to half of its original value

thus in 15 hours, there will be 5 grams remaining

The statement that best defines climate is as follows: the average conditions of the atmosphere for a large region for the past 30 years or more (option D).

Climate is the long-term manifestations of weather and other atmospheric conditions in a given area or country.

Climate is now usually represented by the statistical summary of its weather conditions during a period long enough to ensure that representative values are obtained (generally 30 years).

A description of a climate includes information on, e.g. the average temperature in different seasons, rainfall, and sunshine.

Therefore, option D correctly describes climate.

Learn more about climate at: https://brainly.com/question/10440860

#SPJ1

Answer:

1254 J

Explanation:

Applying,

Q = mcpΔT................... Equation 1

Where Q = heat, m = mass of water, cp = specific heat capacity of water, ΔT = Change in temperature.

From the question,

Given: m = 15 g, cp = 4.18 J/(g.°C), ΔT = 20°C

Substitute these values into equation 1

Q = 15×4.18×20

Q = 1254 J

Hence the amount of energy required is 1254 J

Alright, I'll try my best and see what I can do to help you.

Answer:

I dont know what you mena by road and the people

The volume of air in the room. The volume of the room is given by the product of its length, width, and height=  18.015 g/mol.

Volume of air = 5.0 m × 9.0 m × 2.4 m = 108 m^3

Next, we need to find the number of moles of water vapor present in the air at 85% of the vapor pressure of water at 30°C.

The vapor pressure for water at 30°C is 31.8 torr. At 85% of this value, the vapor pressure of water in the air is:

Vapor pressure in air = 0.85 x 31.8 torr = 27.03 torr

We can use the Ideal Gas Law, PV = nRT, to find the number of moles of water vapor present in the air.

P = 27.03 torr

V = 108 m^3

R = 8.314 J/mol·K (The universal gas constant)

T = 303 K (Temperature in kelvins)

n = (PV) / (RT)

mass of water = n * M(H2O)

Where M(H2O) is the molar mass of water which is 18.015 g/mol. It is important to note that this calculation assumes that air behaves as an ideal gas and that the temperature and pressure remain constant throughout the room. In reality, the temperature and pressure may vary throughout the room and the process of removing water vapor from the air can also affect the temperature and pressure.

to know more about vapor pressure here:

brainly.com/question/11864750

#SPJ4

Answer:

the two factors are the mass of the objects and the coefficient of friction between them

Explanation:

internet :)

As a result, the amount of force the truck exerts on the automobile is equal to the amount of force the truck exerts on the car.

As per Newton's third law of motion

If object A applies a force to object B, then object B must apply a force to object A in the opposite direction and of equal strength. This rule illustrates a symmetry in nature whereby forces always occur in pairs and that no body can exert a force without also being subjected to one.

Because the accident is a head-on collision, according to Newton's third law, both the automobile and the truck will exert equal force against one another.

As a result, it will be safe to ride in the truck since the automobile will accelerate more quickly under the same force due to its lighter weight. Bigger acceleration results in a greater change in velocity, which increases the driver's workload.

For more questions on Newton's third law of motion

https://brainly.com/question/25998091

#SPJ4

A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.

A counterweight's function is to speed up and improve the efficiency of lifting the load, which conserves energy and reduces wear and tear on the lifting apparatus. A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.

To lift loads up to 120 tons, tower cranes are utilized at large building sites. In a tower crane, a fixed and a moveable counterweight are held by two arms that extend from the center of the structure. For the purpose of balancing the load, the operator moves the mobile counterweight.

For the purpose of providing offset forces in the flight controls, counter weights are used. With less pressure needed to move the controls, this gives them better "feel" and "feedback" forces.

To learn more counterweight refer to:

https://brainly.com/question/29840021

#SPJ1

A counterweight should  be moveable so as to make lifting the load in a faster and more efficient manner.

To know more about counterweight  visit

https://brainly.com/question/17236917

#SPJ1

We can find the torque of lever arm by the formula Torque(T)=Force * perpendicular distance.

A torque is an action that causes objects to rotate. A torque is required to rotate an object, just as a force is required to move an object in a line. Torque is created by force, but it also depends on where the force is applied and the point about which the object rotates.

Force and lever arm are not always perpendicular. When the force and lever arm are not perpendicular, trigonometry is required to calculate the length of the lever arm. The force applied is perpendicular to the surface of the object rotating. When this force is at an angle θ with the plane of the object, the perpendicular force requires the use of the sine function.

When an object is in rotational equilibrium, the net torque applied to it is zero. For example, if an object such as a see-saw is not rotating, you know the torque on each side is balanced Rotational equilibrium is often used to determine unknown forces. Any object that is not moving is in rotational equilibrium and in translational equilibrium.

To know more about torque here

https://brainly.com/question/2456794

#SPJ4