The electromagnetic wave with the longest wavelength and lowest frequency/energy is radio waves.
The electromagnetic spectrum encompasses a range of waves with varying wavelengths and frequencies. At one end of the spectrum are radio waves, which have the longest wavelengths and lowest frequencies. As we move along the spectrum towards shorter wavelengths and higher frequencies, we encounter other types of waves such as microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
Radio waves are commonly used for communication, including radio broadcasting, television signals, wireless networks, and radar. They have wavelengths ranging from several millimeters to hundreds of kilometers. Due to their long wavelengths, radio waves carry less energy compared to waves with shorter wavelengths, such as visible light or X-rays.
It's important to note that even though radio waves have low energy and long wavelengths, they are still part of the electromagnetic spectrum and can be used for various practical applications in communication and technology.
To know more about electromagnetic wave refer here
https://brainly.com/question/3101711#
#SPJ11
A meter-stick supports two masses at either end as shown. A single string hanging from the
ceiling to the stick will be used to suspend all three. Assuming the meter-stick has a mass of
100 grams, calculate the correct marking on the stick which will enable the system to remain
horizontal. (Let g = 10m/s2. )
The correct marking on the stick which will enable the system to remain horizontal is 48.5 cm from the left end of the meter stick.
Since the system is in equilibrium, the sum of the torques acting on it must be zero. We can choose any point as the axis of rotation, but it is convenient to choose the left end of the meter stick. In that case, the torques due to the masses m₁ and m₂ are:
τ₁ = m₁ g (x - L/2)
τ₂ = m₂ g (L/2 - x)
where L is the length of the meter stick, and g is the acceleration due to gravity.
The torque due to the meter stick itself is:
τ₃ = (1/2) M g (L/2)
where M is the mass of the meter stick.
Since the system is in equilibrium, the sum of these torques must be zero:
τ₁ + τ₂ + τ₃ = 0
Substituting the expressions for τ₁, τ₂, and τ₃, we get:
m₁ g (x - L/2) + m₂ g (L/2 - x) + (1/2) M g (L/2) = 0
Simplifying and solving for x, we get:
x = (m₁ - M/3) L / (m₁ + m₂ + M/3)
Substituting the given values, we get:
x = (m₁ - 0.1) 1 / (m₁ + m₂ + 0.1/3)
We don't know the values of m₁ and m₂, but we know that the system is in equilibrium, so the weight of m₁ plus the weight of m₂ plus the weight of the meter stick must be equal to zero:
m₁ g + m₂ g + M g = 0
Substituting M = 0.1 kg and g = 10 m/s², we get:
m₁ + m₂ = 1
We can now substitute m₂ = 1 - m₁ in the expression for x:
x = (m₁ - 0.1) / (1 + 0.1/3 - m1)
To find the value of m₁ that makes x equal to L/2 (the midpoint of the meter stick), we set x = L/2 and solve for m₁:
L/2 = (m₁ - 0.1) / (1 + 0.1/3 - m₁)
Simplifying, we get:
2(m₁ - 0.1) = (1 + 0.1/3 - m₁)
Solving for m₁, we get:
m₁ = 0.485 kg
To know more about meter-stick, here
brainly.com/question/15298079
#SPJ4
Determine the forces in all the members and state if these members are in tension or compression,use table to arrange your calculations (show the results on the truss)
To determine the forces in all the members, we have to consider as follows:
1. Draw the truss and label all the members and joints.
2. Determine the support reactions by solving the equilibrium equations (sum of vertical forces, horizontal forces, and moments should be zero).
3. Using the Method of Joints or Method of Sections, analyze each joint or section by applying the equilibrium equations.
4. For each member, calculate the force and determine if it is in tension or compression based on the direction of the force acting on the member.
5. Organize your results in a table with columns for the member label, force value, and whether the force is tension or compression.
6. Finally, show the results on the truss by indicating the force magnitudes and whether each member is in tension or compression.
Remember that for a more accurate answer, I need more details about the truss you are analyzing.
To learn more about compression, refer below:
https://brainly.com/question/30060592
#SPJ11
A small plate has moved away from a large plate. It has moved150,000 meters in 30 million years. It is moving eastward.
1. What is the rate of motion of the small plate? Express your answer in mm/year.
2. Where would the plate be after 1. 5 million years? Express your answer in m
The small plate is moving eastward at a rate of 5 millimeters per year. After 1.5 million years, the small plate would be 7,500 meters farther away from the large plate.
To find the rate of motion of the small plate, we can divide the distance it moved by the time it took to move that distance:
Rate of motion = distance/time
In this case, the distance is 150,000 meters and the time is 30 million years, which is equivalent to 30,000,000 years. Converting both values to millimeters and years, respectively, we get:
Rate of motion = (150,000 meters) / (30,000,000 years) * (1000 mm/meter) / (1 year/1)
Simplifying this expression, we get:
Rate of motion = 5 mm/year
To find where the small plate would be after 1.5 million years, we can use the formula:
distance = rate of motion * time
Using the rate of motion we calculated in part 1 (5 mm/year) and the given time of 1.5 million years, we get:
distance = (5 mm/year) * (1.5 million years)
Converting the result back to meters, we get:
distance = 7,500 meters
To know more about plate, here
brainly.com/question/16941906
#SPJ4
During each individual collision you created did each of the two carts receive the same force during the collision?
It is safe to assume that each cart would experience a distinct force during each collision caused by the carts, and the force distribution would change depending on the aforementioned criteria.
During each individual collision, it is unlikely that the two carts received the same force during the collision. This is because the force of the collision depends on various factors such as the mass and velocity of the carts, the angle of collision, and the materials of the carts.
For instance, if one cart was heavier and moving faster than the other, it would exert more force during the collision. Additionally, the angle of collision can also affect the force received by each cart.
If the collision was head-on, the force would be distributed evenly between the carts. However, if the collision was at an angle, one cart would receive more force than the other.
The materials of the carts can also affect the force of the collision, as carts made of more rigid materials would receive more force than carts made of softer materials.
Overall, it is safe to say that each individual collision created by the carts would result in different forces being exerted on each cart, and the force distribution would vary depending on the aforementioned factors.
To learn more about :collision
https://brainly.com/question/7221794
#SPJ11
Each airport has a runway that is about 500 m long.
when it lands, the speed of the aeroplane is 40 m/s.
explain why the airline should not use an aeroplane that has more mass and
needs a higher speed for landing.
An airport with a 500 m long runway should not use an aeroplane with a higher mass and landing speed because it can pose safety risks.
A higher mass requires more braking force to slow down the plane, and a higher landing speed means that the plane will travel a longer distance before coming to a stop.
These factors can make it difficult for the aeroplane to safely decelerate within the limited runway length, increasing the chances of a runway overrun or accident.
Braking force and mass: When an airplane lands, it needs to decelerate to a complete stop. The deceleration is achieved by applying braking force through the aircraft's landing gear.
A higher mass aircraft requires more braking force to slow down due to its increased inertia. If the runway is not long enough to provide sufficient space for the aircraft to decelerate, the increased mass can make it more challenging to bring the aircraft to a safe stop within the available distance.
Landing distance and speed: The landing speed of an aircraft is the speed at which it touches down on the runway. Higher landing speeds typically require more distance for the aircraft to come to a stop.
This distance is influenced by various factors, including aircraft weight, wind conditions, runway condition, and braking efficiency. If an airplane with a higher landing speed lands on a shorter runway, it will require a longer distance to decelerate to a safe stop.
Runway overrun and accidents: When an airplane is unable to decelerate within the available runway length, it can lead to a runway overrun. A runway overrun occurs when an aircraft is unable to stop on the runway and continues off the end of the runway, potentially causing damage to the aircraft, injuries, or even fatalities.
Additionally, the lack of sufficient deceleration can increase the chances of accidents, such as collisions with obstacles or other aircraft on the ground.
To learn more about inertia, refer below:
https://brainly.com/question/3268780
#SPJ11
Questions 1
Describe how radio telescopes are used to explore space.
2. How are radio waves used on Earth?
3. Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis? (Hint: What did the article say about the advantages of digital signals?)
1. Radio telescopes are used to explore space by detecting and collecting radio waves emitted by celestial objects such as stars, galaxies, and other astronomical phenomena.
By analyzing these radio waves, scientists can gather information about the composition, movement, and distance of these objects, helping us understand the universe better.
2. On Earth, radio waves are used for various purposes, including communication, broadcasting, and navigation. They are used in devices like radios, TVs, cell phones, and GPS systems, enabling us to send and receive information over long distances without wires.
3. Radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis because digital signals have certain advantages.
They are less susceptible to noise and interference, allowing for more accurate and reliable data. Additionally, digital signals can be easily processed, stored, and analyzed using computers, making it more convenient for scientists to study the collected data.
To learn more about data, refer below:
https://brainly.com/question/10980404
#SPJ11
according to the laws of thermal radiation, hotter objects emit photons with group of answer choices a lower average energy. a lower average frequency. a shorter average wavelength. a higher average speed.
This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.
According to the laws of thermal radiation, hotter objects emit photons with a shorter average wavelength. This is because the energy of a photon is directly proportional to its frequency, and inversely proportional to its wavelength. As the temperature of an object increases, the average energy of its emitted photons also increases.
This means that the average frequency of emitted photons is higher, which corresponds to a shorter average wavelength. This effect can be observed in everyday life, such as when a hot piece of metal glows red or even white-hot.
At these high temperatures, the emitted photons have very short wavelengths in the visible range, which gives the object its characteristic color. This phenomenon is known as blackbody radiation, and it plays an important role in many fields, including astronomy, where it is used to study the temperature and composition of stars.
This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.
To learn more about : phenomenon
https://brainly.com/question/24431608
#SPJ11
A 250 Kg cast iron car engine contains water as a coolant. Suppose the temperature of the engine is 35°C when it is shut off. The air temperature is 10°C. The heat given off
by the engine and water in it, as they cool to air temperature is 4. 4x106 J. What mass of water is used to cool the engine?
Approximately 4.188 kg of water is used to cool the engine.
To determine the mass of water used to cool the engine, we need to use the specific heat capacity of water and the formula for heat transfer.
We can assume that the engine and water in it initially had a temperature of 35°C and cooled to 10°C. The temperature difference is ΔT = 35°C - 10°C = 25°C.
The formula for heat transfer is Q = mcΔT, where Q is the heat transferred, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.
We are given Q = 4.4x [tex]10^{6}[/tex] J and the mass of the engine, so we need to find c for water.
The specific heat capacity of water is 4.18 J/g°C. We can rearrange the formula to solve for the mass of water: m = Q / cΔT. Plugging in the values, we get:
m = 4.4x [tex]10^{6}[/tex] J / (4.18 J/g°C x 25°C) = 4188 g or 4.188 kg
Therefore, approximately 4.188 kg of water is used to cool the engine.
To know more about heat transfer, refer here:
https://brainly.com/question/13433948#
#SPJ11
part 2 someone help pls
ans. 32P16
When phosphorus-32 undergoes beta decay, the nuclide formed is sulfur-32. Phosphorus-32 undergoes beta minus decay, changing a neutron to a proton. This increases the atomic number by one. If it underwent beta minus decay, a proton would change to a neutron and decrease the atomic number by one.
A boy is carrying a bucket of water of mass 5 kg. If he does 500 J of work to what height will raise it?
The boy must raise the bucket to a height of 10.15 meters in order to do 500 J of work.
To calculate the height to which the boy raises the bucket of water, we need to use the equation for gravitational potential energy:
PE = mgh
where PE is the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height.
Since the boy does 500 J of work, this energy is equal to the change in potential energy of the bucket:
W = ΔPE
ΔPE = mghf - mghi
where [tex]h_{i}[/tex] is the initial height (which we can assume is zero), [tex]h_{f}[/tex] is the final height we want to find, and W is the work done.
Substituting the values given in the problem, we have:
500 J = 5 kg × 9.81 [tex]m/s^{2}[/tex] × [tex]h_{f}[/tex]
Solving for [tex]h_{f}[/tex], we get:
[tex]h_{f}[/tex] = 500 J / (5 kg × 9.81 [tex]m/s^{2}[/tex]) = 10.15 m
Therefore, the boy must raise the bucket to a height of 10.15 meters in order to do 500 J of work.
To know more about gravitational potential energy, refer here:
https://brainly.com/question/19768887#
#SPJ11
Mr. B catches the sports on 610 AM, which broadcasts at 610 kHz. Determine the wavelength of these radio waves.
These radio waves have a wavelength of roughly 492.62 metres.
What is the FM broadcasting frequency?In the USA, the FM transmission runs from 88.0 MHz to 108.0 MHz. 100 channels, each 200 kHz (0.2 MHz) wide, make up the band. The centre frequency is situated 100 kHz (0.1 MHz) up from the channel's lower end, or at half the FM channel's bandwidth. As frequency rises as energy falls, frequency and energy are related directly in the energy equation.
wavelength Equals light's speed (c) divided by frequency (f)
Where the speed of light (c) is approximately 3.00 x 10⁸ m/s.
Converting the given frequency of 610 kHz to Hz:
610 kHz = 610 x 10³ Hz
Substituting the values in the formula:
λ = (3.00 x 10⁸ m/s) / (610 x 10³ Hz)
λ = 492.62 meters (approx.)
To know more about wavelength visit:-
https://brainly.com/question/13533093
#SPJ1
A 66-kg skier speeds down a trail, as shown in (Figure 1). The surface is smooth and inclined at an angle of 22 ∘ with the horizontal.
A)Complete the free-body diagram by adding the forces that act on the skier.
Draw the vectors with their tails at the black dot.
B)Determine the normal force acting on the skier. Express your answer in newtons.
(a) The free body diagram consist of three forces, normal force, weight of skier, and force of friction.
(b) The normal force acting on the skier is approximately 600 N.
What are the forces acting on the skier?The forces that act on the skier are:
Gravitational force or weight (W) acting vertically downward with a magnitude of W = mg.Normal force (N) acting perpendicular to the surface of the slope, with a magnitude equal to the component of the gravitational force perpendicular to the slope.Frictional force (F) acting parallel to the surface of the slope, opposing the motion of the skier.B) To determine the normal force acting on the skier, we need to find the component of the gravitational force perpendicular to the slope. This can be calculated using trigonometry:
N = mg cos(θ)
where;
θ is the angle of inclination of the slope with respect to the horizontal.Substituting the given values, we get:
N = (66 kg) x (9.8 m/s^2) x cos(22°)
N ≈ 600 N
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
A vessel is filled with a gas at a temperature 30c and a pressure of 760mmhg calculate the final pressure if the volume of the gas is double while it's heated at 80c
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P1 x V1) / T1 = (P2 x V2) / T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
First, let's convert the initial temperature of 30°C to Kelvin:
T1 = 30°C + 273.15 = 303.15 K
We can now set up the equation with the initial conditions:
(760 mmHg x V1) / 303.15 K = (P2 x 2V1) / 353.15 K
where V1 is the initial volume of the gas.
Simplifying this equation by multiplying both sides by 303.15 K and dividing by 2V1, we get:
P2 = (760 mmHg x 303.15 K) / (353.15 K) = 653.75 mmHg
Therefore, the final pressure of the gas is 653.75 mmHg when the volume is doubled and the temperature is increased to 80°C.
Electron and positron each with kinetic energy 220kev are generated by photon, what is the energy and wavelength
The energy of the photon is 440 keV (or 7.048 x 10^-14 J), and the wavelength is approximately 2.82 x 10^-12 meters.
When an electron and positron are generated by a photon, the energy of the photon is converted into the mass and kinetic energy of the two particles.
The energy of the photon can be calculated by adding the kinetic energies of the electron and positron, which is 220 keV + 220 keV = 440 keV. To convert this to Joules, multiply by 1.602 x 10^-16 J/keV, which gives you an energy of 7.048 x 10^-14 J.
To calculate the wavelength of the photon, we can use the Planck's equation: E = h*c/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 J·s), and c is the speed of light (3 x 10^8 m/s). Solving for the wavelength λ:
λ = h*c/E = (6.626 x 10^-34 J·s)*(3 x 10^8 m/s)/(7.048 x 10^-14 J) ≈ 2.82 x 10^-12 m
So, the energy of the photon is 440 keV (or 7.048 x 10^-14 J), and the wavelength is approximately 2.82 x 10^-12 meters.
To learn more about photon, refer below:
https://brainly.com/question/20912241
#SPJ11
Particles q1 = +8. 0 °C, 92 = +3. 5 uc, and
q3 = -2. 5 uC are in a line. Particles qi and q2 are
separated by 0. 10 m and particles q2 and q3 are
separated by 0. 15 m. What is the net force on
particle qı?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-2. 5 με
+8. 0 μC
+91
+3. 5 με
+92
93
K 0. 10 m
+
0. 15 m
The net force on particle q1 is approximately 17.12 N to the right.
To calculate the net force on particle q1, we'll use Coulomb's Law: F = k * |q1 * q2| / r^2, where F is the force between two charges, k is the Coulomb's constant (8.99 * 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.
First, we'll find the force between q1 and q2 (F12):
F12 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (3.5 * 10^-6 C) / (0.10 m)^2
F12 = 19.996 N (right)
Next, we'll find the force between q1 and q3 (F13):
F13 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (2.5 * 10^-6 C) / (0.25 m)^2
F13 = 2.8792 N (left)
Now, we'll calculate the net force on q1 (F_net) by subtracting the left force from the right force:
F_net = F12 - F13
F_net = 19.996 N - 2.8792 N
F_net = 17.1168 N (right)
So, the net force on particle q1 is approximately 17.12 N to the right.
To learn more about force, refer below:
https://brainly.com/question/13191643
#SPJ11
Two devices of rating 22 W; 220 V and 11 W; 220 V are connected in series. The combination is
connected across a 440 V mains. The fuse of which of the two devices is likely to burn when
switch is on ? Justify your name.
The fuse of the 22 W device is more likely to burn out.
When two devices of different power ratings are connected in series, the voltage across each device is equal, but the current through each device will be different.
In this case, the two devices have power ratings of 22 W and 11 W, and are connected in series across a 440 V mains.
To determine which device is likely to burn out when the switch is turned on,
we need to calculate the current through each device using Ohm's law, which states that I = V/R, where I is the current, V is the voltage, and R is the resistance.
The resistance of each device can be calculated as follows:
For the 22 W device, R = V^2/P = (220 V)^2/22 W = 2200 ohms
For the 11 W device, R = V^2/P = (220 V)^2/11 W = 4400 ohms
The total resistance of the circuit can be found by adding the individual resistances:
R_total = R1 + R2 = 2200 + 4400 = 6600 ohms
Using Ohm's law, we can calculate the current through each device:
For the 22 W device, I1 = V/R1 = 220 V/2200 ohms = 0.1 A
For the 11 W device, I2 = V/R2 = 220 V/4400 ohms = 0.05 A
Since the 22 W device has a higher current flowing through it, it is more likely to burn out when the switch is turned on.
To know more about power ratings refer here
https://brainly.com/question/26256725#
#SPJ11
Question 5 of 15
In which reaction are the atoms of elements rearranged?
O A. Two isotopes of hydrogen fuse to form helium.
O B. Uranium-235 breaks apart into krypton, barium, and three
neutrons.
O C. Methane gas combines with oxygen to form carbon dioxide and
water.
O D. Plutonium-240 breaks apart into xenon, zirconium, and three
neutrons.
SUBMIT
The correct answer is C. Methane gas combines with oxygen to form carbon dioxide and water.
Methane gas combines with oxygen to form carbon dioxide and water. This is a chemical reaction where the atoms of the reactants (methane and oxygen) are rearranged to form the products (carbon dioxide and water). In the other reactions mentioned, either nuclear fusion or nuclear fission occurs, which involves changes in the nuclei of the atoms, but not a rearrangement of the atoms themselves.
Know more about Methane Gas here:
https://brainly.com/question/12645635
#SPJ11
Every time the world gathers for the Olympic games, new records in track and field events are recorded. In 2021, Sydney McLaughlin established a new Olympic record when she ran the 400.-meter hurdles in 51.46 seconds.
What was her average speed (in m/s) for the race? Remember to include your data, equation, and work when solving this problem.
Essay Submission · Turnitin Score: 36 %
Sydney McLaughlin's average speed during the 400-meter hurdles race was 7.77 m/s.
What was her average speed for the race?The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as follows;
Average speed = distance / time
The distance is 400 meters, and the time is 51.46 seconds.
The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as;
Average speed = 400 / 51.46
Average speed = 7.77 m/s
Learn more about average speed here: https://brainly.com/question/4931057
#SPJ1
Estimate the lowest possible kinetic energy of a neutron contained in a typical nucleus of radius 1. 2×10−15m. Use the radius as the uncertainty in position for the neutron. [Hint: Assume a particle can have a kinetic energy as large as its uncertainty. ]
The uncertainty principle can be used to estimate the minimum kinetic energy of a neutron in a nucleus of a certain size. The resulting minimum energy is around [tex]10^{-24}[/tex] joules.
The uncertainty principle states that the product of the uncertainty in the position and momentum of a particle must be greater than or equal to Planck's constant divided by 4π.
Therefore, using the given radius of the nucleus as the uncertainty in position, we can calculate the minimum kinetic energy of a neutron in the nucleus by assuming it has an uncertainty in momentum equal to its uncertainty in position.
Using this approach, we have:
[tex]\Delta x = 1.2 \times 10 - 15 m[/tex] (uncertainty in position)
[tex]\Delta p = \Delta mv = \Delta m(\Delta x/\Delta t) = \Delta m(2\pi \Delta f \Delta x)[/tex] (uncertainty in momentum)
where Δm is the uncertainty in mass, Δf is the frequency of the neutron, and Δt is the time interval over which the position is measured.
Assuming a typical frequency of [tex]10^{21} Hz[/tex] and a mass uncertainty of 1 atomic mass unit [tex](1.67 \times 10^{-27} kg)[/tex], we obtain a minimum kinetic energy of approximately [tex]10^{-24} \;joules[/tex].
In summary, the minimum kinetic energy of a neutron contained in a typical nucleus of radius [tex]1.2 \times 10^{-15} m[/tex] can be estimated using the uncertainty principle.
This approach involves assuming an uncertainty in momentum equal to the uncertainty in position and using typical values for the frequency and mass uncertainty of the neutron. The resulting minimum kinetic energy is on the order of [tex]10^{-24} \;joules[/tex].
To know more about kinetic energy refer here:
https://brainly.com/question/7674744#
#SPJ11
If i drop a ball 15 meters off the ground what will be the velocity right before it hits the ground
The velocity of the ball right before it hits the ground is approximately 17.15 m/s.
Assuming that there is no air resistance, the velocity of the ball right before it hits the ground can be calculated using the equation v² = u² + 2as, where v is the final velocity, u is the initial velocity (which is 0 m/s in this case), a is the acceleration due to gravity (which is approximately 9.8 m/s²), and s is the distance the ball falls (which is 15 meters in this case). Plugging these values into the equation, we get:
v² = 0² + 2(9.8)(15)
v² = 294
v ≈ 17.15 m/s
the velocity of the ball right before it hits the ground is approximately 17.15 m/s.
Therefore, the velocity of the ball right before it hits the ground is approximately 17.15 m/s.
Know more about the equations of motion here:
https://brainly.com/question/14355103
#SPJ11
How many waves are shown in the diagram above? If the diagram represents 2 seconds, what is the frequency of the wave shown? What is the period of the wave shown? If the total distance show above is 10 meters, what is the wavelength of a single wave? What is the speed of the diagram above?
Based on the attached diagram:
only one wave is shown in the diagramthe frequency of the wave shown is 1.5 Hzthe period of the wave shown is 0.67 secondsthe wavelength of the wave 3.33 mthe speed of the wave is 5 ms/sWhat is the frequency of the wave?The frequency of the wave is calculated s follows;
Frequency = Number of complete oscillations / time
Frequency = 3/2
Frequency = 1.5 Hz
Period = 1/f
Period = 1/1.5
Period = 0.67 seconds
wavelength = distance / Number of complete oscillations
wavelength = 10 / 3
wavelength = 3.33 m
Speed = wavelength * freqeuncy
Speed = 3.33 * 1.5
Speed = 5 m/s
Learn more about frequency and wavelength at: https://brainly.com/question/6297363
#SPJ1
A beam of light travels from air into a transparent material. The angle of incidence is 24 ∘ and the angle of refraction is 17 ∘
Using this equation, the refractive index of a material with an angle of incidence of 24∘ and an angle of refraction of 17∘ was found to be approximately 1.33, consistent with common transparent materials.
When a beam of light passes from one medium into another, its direction changes due to the change in the speed of light in the different media. This phenomenon is known as refraction. The angle of incidence is the angle between the incident ray and the normal to the surface at the point of incidence, and the angle of refraction is the angle between the refracted ray and the normal.
The relationship between the angles of incidence and refraction is given by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media. Mathematically,
[tex]$\frac{\sin{\theta_1}}{\sin{\theta_2}}=\frac{v_1}{v_2}$[/tex]
where [tex]"\theta_2"[/tex] is the angle of incidence, [tex]"\theta_2"[/tex] is the angle of refraction, [tex]v_1[/tex] is the speed of light in the incident medium (in this case, air), and [tex]v_2[/tex] is the speed of light in the transparent material.
Assuming that the transparent material has a higher refractive index than air, we know that the angle of refraction will be smaller than the angle of incidence. In this case, we are given that [tex]"\theta_1"[/tex] = 24∘ and [tex]"\theta_2"[/tex] = 17∘. We can use Snell's law to find the refractive index of the transparent material.
First, we need to know the speed of light in the air and the speed of light in the transparent material. The speed of light in air is approximately [tex]$3 \times 10^8 \text{ m/s}$[/tex], and the speed of light in the transparent material depends on its refractive index. Let's denote the refractive index of the material by n. Then, we have:
[tex]$\frac{\sin{24^\circ}}{\sin{17^\circ}}=\frac{3 \times 10^8 \text{ m/s}}{v_2}$[/tex]
Solving for [tex]v_2[/tex], we get:
[tex]$v_2 = (3 \times 10^8 \text{ m/s}) \times \frac{\sin{17^\circ}}{\sin{24^\circ}} \approx 2.26 \times 10^8 \text{ m/s}$[/tex]
Next, we can use the relationship between the speed of light and the refractive index to find n:
[tex]$n = \frac{c}{v_2}$[/tex]
where c is the speed of light in a vacuum
Thus,
[tex]$n = \frac{3 \times 10^8 \text{ m/s}}{2.26 \times 10^8 \text{ m/s}} \approx 1.33$[/tex]
This value of the refractive index is close to that of common transparent materials like water and glass.
In summary, when a beam of light travels from air into a transparent material at an angle of incidence of 24∘ and an angle of refraction of 17∘, the refractive index of the material can be found using Snell's law and the relationship between the speed of light and the refractive index. The calculated value of the refractive index is approximately 1.33, which is consistent with that of common transparent materials.
To learn more about refractive index
https://brainly.com/question/30761100
#SPJ4
A 20 kg tennis ball launcher shoots a 0. 057 kg tennis ball across a frictionless court. If the tennis ball’s velocity after it is launched is 36 m/s to the north, what is the velocity of the tennis ball launcher?
The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.
To determine the velocity of the tennis ball launcher, we can apply the law of conservation of momentum. This law states that the total momentum before an event is equal to the total momentum after the event, provided no external forces are acting on the system.
Before the launch, both the 20 kg tennis ball launcher and the 0.057 kg tennis ball are at rest, so the total initial momentum is zero. After the launch, the tennis ball has a velocity of 36 m/s to the north. We can find the final momentum of the launcher using the equation:
initial momentum = final momentum
0 = (mass of tennis ball)(velocity of tennis ball) + (mass of launcher)(velocity of launcher)
Substitute the given values:
0 = (0.057 kg)(36 m/s) + (20 kg)(velocity of launcher)
Solve for the velocity of the launcher:
velocity of launcher = -(0.057 kg * 36 m/s) / 20 kg
The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.
To know more about velocity, refer here:
https://brainly.com/question/1482529#
#SPJ11
suppose you have a straight wire that has a resistance of 5 ohms and a length of 11 meters, attached to a battery. by orienting the wire in different directions in a 7-tesla magnetic field, you find that there is a force on the wire that varies in magnitude from 0 n to a maximum of 11 n. what is the battery voltage in units of volts? enter a number to the nearest 0.01 with no units, e.g., 17.42
suppose you have a straight wire that has a resistance of 5 ohms and a length of 11 meters, attached to a battery. The U is 5 volts, to the nearest 0.01.
Using the given information, we can determine the current flowing through the wire when the maximum force is experienced. The formula for the force on a wire in a magnetic field is:
F = B * I * L * sin(theta)
Where F is the force, B is the magnetic field strength, I is the current, L is the length of the wire, and theta is the angle between the magnetic field and the current. In this case, the maximum force occurs when sin(theta) = 1 (i.e., when the angle is 90 degrees).
Given F = 11 N, B = 7 T, and L = 11 m, we can solve for I:
11 N = 7 T * I * 11 m
I = 11 N / (7 T * 11 m)
I = 1 A
Now that we know the current, we can use Ohm's Law (V = I * R) to find the battery voltage, where V is the voltage, I is the current, and R is the resistance:
V = 1 A * 5 Ohms
V = 5
To learn more about : volts
https://brainly.com/question/27861305
#SPJ11
Please help Anatomy and phys
1. Compare and contrast positive and negative feedback loops of the endocrine system. Provide a specific example of each, including which gland is responsible for the hormone related to that loop.
2. What is the difference between endocrine and exocrine glands in terms of both form and function? Why is one type not considered part of the endocrine system?
3. Describe the cascade of events that occurs when blood glucose levels decline, including which organ and cells respond, which hormones are released, and how the process helps maintain homeostasis. Your answer should cover all three ways glucose is re-introduced to the body. What is the ultimate use of the glucose created in this process?
4. Why can both type I and type II diabetes, untreated, result in impaired vision or blindness as someone ages? How does type II diabetes turn into type I diabetes as someone ages?
5. Imagine you have a patient who has come to you and is exhibiting symptoms such as fatigue and increased thirst and urination. What would you check for to determine whether the patient has Cushing’s, type I diabetes, or type II diabetes?
When blood glucose levels decline, several organs and cells in the body respond to restore glucose levels and maintain homeostasis. The first response comes from the pancreas, which releases glucagon into the bloodstream. Glucagon stimulates the liver to break down stored glycogen into glucose, which is then released into the bloodstream. This process is called glycogenolysis and is one of the three ways glucose is reintroduced to the body.
The second response comes from the adrenal glands, which release epinephrine and norepinephrine into the bloodstream. These hormones stimulate the liver to break down glycogen into glucose, and they also stimulate the breakdown of fat cells into glucose, a process called lipolysis. This is the second way glucose is reintroduced to the body.
Finally, the third response comes from the kidneys, which can produce glucose through a process called gluconeogenesis. This is the third way glucose is reintroduced to the body.
The ultimate use of the glucose created in this process is to provide energy to the body's cells. Glucose is the primary source of energy for the brain and is also used by muscles and other organs.
If a patient exhibits symptoms such as fatigue and increased thirst and urination, several tests can be conducted to determine if they have Cushing's syndrome, type I diabetes, or type II diabetes. For Cushing's syndrome, tests may include blood and urine tests to measure cortisol levels, as well as imaging tests to check for tumors in the adrenal or pituitary glands.
For type I diabetes, blood tests may be conducted to measure blood glucose and ketone levels, as well as tests to measure levels of antibodies that attack insulin-producing cells. For type II diabetes, blood tests may be conducted to measure blood glucose levels, as well as tests to measure insulin resistance and other metabolic factors.
Additionally, a physical exam may reveal signs such as high blood pressure or excess weight, which can be associated with type II diabetes. Overall, a thorough medical evaluation can help determine the underlying cause of a patient's symptoms and guide appropriate treatment.
To know more about homeostasis refer here
https://brainly.com/question/3888340#
#SPJ11
You are participating in a fresh water fishing tournament with the goal of catching the heaviest fish. You are in the middle of the river when you finally get your catch; unfortunately, you realize that you left the spring scales in your car. All you have in the boat are the paddles, your 16 Oz coffee mug, some rope, measuring tape, and a plastic bag.
Required:
Estimate the mass of the fish (in kilograms) using these items
To estimate the mass of the fish using the available items, follow these steps:
1. Fill your 16 oz coffee mug with river water.
2. Tie the rope around the fish securely, ensuring it doesn't escape.
3. Place the fish inside the plastic bag and seal it. Make sure there's no air inside the bag.
4. Use the paddles to create a makeshift balance scale. Balance the paddle on a stable surface in the boat, with the center acting as a fulcrum.
5. Place the bag with the fish on one end of the paddle and the coffee mug filled with water on the other end.
6. Gradually add or remove water from the coffee mug until the paddle balances evenly.
7. Measure the volume of water left in the coffee mug. This is approximately equal to the volume of the fish.
8. Assume the fish has a density similar to water (1 kg/L). Convert the remaining water volume in the coffee mug from ounces to liters (16 oz = 0.473 L).
9. Multiply the fish's volume in liters by its density (1 kg/L) to find the fish's mass in kilograms.
Keep in mind that this method is an estimation and may not be extremely accurate, but it should give you a rough idea of the fish's mass in the absence of proper scales.
To learn more about density, refer below:
https://brainly.com/question/29775886
#SPJ11
Waves in a lake are 5 meters in length and pass an anchored boat 2 seconds apart. What is the speed of the waves?
The speed of the waves passing the anchored boat can be calculated using the formula Speed = Wavelength / Period. With a wavelength of 5 meters and a period of 2 seconds, the speed of the waves is 2.5 meters per second.
The speed of the waves can be determined by the formula:
Speed = Wavelength / Period
Where wavelength is the distance between two consecutive wave crests, and period is the time it takes for two consecutive wave crests to pass a fixed point (in this case, the anchored boat).
We know that the wavelength of the waves is 5 meters. We also know that the period is 2 seconds. Therefore:
Speed = 5 meters / 2 seconds = 2.5 meters/second
So the speed of the waves is 2.5 meters per second.
To learn more about wavelength
https://brainly.com/question/31143857
#SPJ4
The most massive Shinkansen bullet trains are the series-200 trains. This type of train also has one of the highest operating speeds: 76. 4 m/s. If a series-200 train has a maximum kinetic energy of 2. 78x 10 to the 9J, what is its mass?
The mass of the series-200 Shinkansen bullet train is approximately 953,000 kg.
High-speed trains like the Shinkansen bullet train are well-known for their quickness and effectiveness. With a top speed of 76.4 m/s, the series-200 train is one of the largest bullet trains currently in use. Knowing the train's mass is crucial for ensuring correct operation since the kinetic energy of the train plays a significant role in its performance and safety.
To find the mass of the series-200 Shinkansen bullet train, we'll use the formula for kinetic energy:
Kinetic Energy (KE) = 0.5 * mass (m) * velocity^2 (v^2)
The highest kinetic energy (2.78 x 109 J) and velocity (76.4 m/s) are provided. We'll now calculate the mass:
1. Rearrange the formula to isolate mass:
mass (m) = (2 * KE) / v^2
2. Plug in the given values:
mass (m) = (2 * 2.78 x 10^9 J) / (76.4 m/s)^2
3. Calculate the mass:
mass (m) = (5.56 x 10^9 J) / (5833.76 m^2/s^2)
mass (m) = 9.53 x 10^5 kg
To know more about kinetic energy, click here;
https://brainly.com/question/26472013
#SPJ11
Two charges are separated by 1. 68 cm. Object A has a charge of 5. 0 μ C , while object B has a charge of 7. 0 μ C. What is the force on Object A?
0.174 N of force is acting on object A. The force on object A due to object B can be found using Coulomb's law:
F = k * (q1 * q2) / r^2
where F is the force, k is Coulomb's constant, q1 and q2 are the charges of the objects, and r is the distance between them.
Plugging in the values given:
F = (9 x 10^9 N*m^2/C^2) * ((5.0 x 10^-6 C) * (7.0 x 10^-6 C)) / (0.0168 m)^2
F = 0.174 N
Therefore, the force on object A is 0.174 N.
Know more about Coulomb's Law here:
https://brainly.com/question/31827766
#SPJ11
4. The speed of a d. C. Motor increases with increasing current through the armature coil. Given fixed supply voltage, two ways of changing the current supplied to the motor are: (1) a variable resistor (potentiometer) or (2) pulse width modulation (PWM). Explain how each method works. Provide one advantage and one disadvantage of each method
Both variable resistors and PWM can be used to: control the speed of a DC motor, with the former offering simplicity and the latter providing higher efficiency.
The speed of a DC motor increases with increasing current through the armature coil. There are two ways to change the current supplied to the motor: (1) using a variable resistor (potentiometer) and (2) employing pulse width modulation (PWM).
1) Variable Resistor (Potentiometer): This method works by adjusting the resistance in the circuit, which controls the current flowing through the motor. By changing the resistance, you can change the current and hence, the motor speed. One advantage of this method is its simplicity and ease of use. A disadvantage, however, is that it can be inefficient, as some energy is lost as heat in the resistor.
2) Pulse Width Modulation (PWM): This method works by switching the supply voltage on and off at a specific frequency, thus creating pulses with varying widths. The average voltage applied to the motor is controlled by adjusting the pulse width, which in turn, controls the motor speed. One advantage of PWM is its efficiency, as there is minimal energy loss in the process. A disadvantage, though, is that it can generate electrical noise and requires more complex circuitry.
In summary, both variable resistors and PWM can be used to control the speed of a DC motor, with the former offering simplicity and the latter providing higher efficiency.
To know more about DC motor, refer here:
https://brainly.com/question/8942733#
#SPJ11