Which number line best represents the solution to the problem below -x-8<16

Answer:

Step-by-step explanation:

It is possible if your friend has a bigger glass than you.

There would be a problem with taking readings from the right side of a sphere if the diameters of the spheres were different because the right side of a sphere is not a fixed point, but rather a relative term.

If the diameters of two spheres were different, the right side of one sphere would not be the same as the right side of the other sphere. This means that taking readings from the right side of each sphere would not be a fair comparison, as the points being measured are not equivalent.

For example, imagine two spheres with diameters of 5cm and 10cm, respectively. If we were to take readings from the right side of each sphere, we would be measuring points at different distances from the center of each sphere. This would result in inaccurate measurements and an unfair comparison.

To avoid this problem, it is important to define a consistent point of measurement on each sphere that is equivalent, regardless of the diameter. For example, measuring from the center of each sphere would provide a consistent and fair comparison.

To learn more about sphere click on,

https://brainly.com/question/31066551

#SPJ4

If 7 cards are dealt from an ordinary deck of 52 playing cards, the probability that (a) exactly 2 of them will be face cards is 0.3601. and  (b) at least 1 of them will be a queen is 0.0008.

A) The probability that exactly 2 of the 7 cards dealt from an ordinary deck of 52 playing cards will be face cards is as follows:

      We need to use the formula for probability here. The probability formula is given by,

       Probability = Number of favorable outcomes/ Total number of possible outcomes.

The total number of possible outcomes = Number of ways 7 cards can be selected from 52 =  ₅₂C₇

A number of favorable outcomes = Number of ways 2 face cards can be selected from 12 face cards * Number of ways 5 nonface cards can be selected from 40 non-face cards

                                                      = ₁₂C₂ * ₄₀C₅

      Putting these values in the formula,

      Probability =  ₁₂C₂ * ₄₀C₅ / ₅₂C₇.

      Simplifying this gives Probability = 0.3601. (Rounded to four decimal places)

b) The probability that at least 1 of the 7 cards dealt from an ordinary deck of 52 playing cards will be a queen is as follows:

         Here, we can use the complement rule. i.e. we can calculate the probability of none of the 7 cards being a queen and subtract that from

  1. Total number of possible outcomes = Number of ways 7 cards can be selected from

                                                           52  =  ₅₂C₇

Number of favorable outcomes = Number of ways 7 non-queen cards can be selected from 48 non-queen cards = ₄₈C₇

Putting these values in the formula,

      The Probability of none of the cards being a queen = ₄₈C₇ / ₅₂C₇

Therefore, the Probability of at least 1 of the 7 cards being a queen

                     = 1 - ₄₈C₇ / ₅₂C₇ Probability of at least 1 queen

                     = 1 - 0.9992

                     = 0.0008 (rounded to four decimal places).

Learn more about the probability of a deck of 52 playing cards at: https://brainly.com/question/5858025

#SPJ11

Answer: x= 71

Step-by-step explanation:

Since each triangle has a sun of all the angles to equal 180, we can figure what is X.

Answer:

2/3 is the answer .......mmm..

As a result, the carer will deliver 0.38 mL of methylprednisolone.

Milliliter is what the ml stands for. When pronouncing the characters aloud, the word ml is usually pronounced millilitre. It's good to keep this in mind. Simply imagine to yourself, "l = liquid," whenever you see the small "l".

To determine how many milliliters of methylprednisolone injection the nurse will administer, we need to know the concentration of the medication. Let's assume the concentration is 40 mg/mL.

We can use the following formula to calculate the amount to administer:

Amount (mL) = Dose (mg) / Concentration (mg/mL)

Plugging in the values from the order, we get:

Amount (mL) = 15 mg / 40 mg/mL

Amount (mL) = 0.375 mL

Rounding the answer to the nearest hundredth gives us:

Amount (mL) = 0.38 mL

Therefore, the nurse will administer 0.38 mL of methylprednisolone injection.

To know more about Milliliter visit:

https://brainly.com/question/28920784

#SPJ1

The function f(x) has a decreasing end behaviour on the right when its leading coefficient is negative and its degree is greater than or equal to 2.

This means that the terms in the function must be decreasing from left to right and the last term must be negative. To illustrate, an example of a function with a decreasing end behaviour on the right could be

f(x) = -2x2 + 3x + 4.

The leading coefficient is -2, which is negative, and the degree is 2, which is greater than or equal to 2. The terms decrease from left to right, and the last term is negative, which both fulfil the requirements for the function to have a decreasing end behaviour on the right.

For more such questions on The function

https://brainly.com/question/29661677

#SPJ11

The factors that could be part of the function so that the function has a decreasing end behavior on the right are as follows: - A negative coefficient of the highest degree term.

- An odd degree of the highest degree term and a negative coefficient.
- An even degree of the highest degree term and a negative coefficient.
Explanation:
A function's end behavior refers to what happens to the function's values as x approaches positive or negative infinity. A function's end behavior is said to be decreasing if the values of the function decrease as x approaches infinity, and increasing if the values of the function increase as x approaches infinity.
There are three cases when the function has a decreasing end behavior on the right:

1. If the highest degree term has a negative coefficient, the function will have a decreasing end behavior on the right. For example, the function f(x) = -2x³ - 4x² + 3x + 6 will have a decreasing end behavior on the right.
2. If the highest degree term is odd and has a negative coefficient, the function will have a decreasing end behavior on the right.

For example, the function f(x) = -x⁵ + 2x³ - x will have a decreasing end behavior on the right.
3. If the highest degree term is even and has a negative coefficient, the function will have a decreasing end behavior on the right. For example, the function f(x) = -4x⁶ + 3x⁴ - 2x² + 1 will have a decreasing end behavior on the right.

For similar question on coefficient.

https://brainly.com/question/27969435

#SPJ11

Answer:

To factor 4x³-10x²-14x, we can first factor out the greatest common factor, which is 2x:

4x³-10x²-14x = 2x(2x² - 5x - 7)

Next, we can factor the quadratic expression 2x² - 5x - 7 using either factoring by grouping, completing the square, or the quadratic formula. Here, we'll use factoring by grouping:

2x² - 5x - 7 = 2x² - 7x + 2x - 7

= (2x² - 7x) + (2x - 7)

= x(2x - 7) + (2x - 7)

= (2x - 7)(x + 1)

Therefore, the factored form of 4x³-10x²-14x is:

4x³-10x²-14x = 2x(2x - 7)(x + 1)

The elements of the sequence that are divisible by 5 occur every third term, while the elements divisible by 13 occur every fourth term. There are no elements of the sequence that are divisible by 65, since there are no elements that are divisible by both 5 and 13.

To find which elements of the sequence are divisible by 5, we need to find the remainder of each element when divided by 5. Using the first few terms of the sequence, we get:

a₁ = -1, a₂ = 0, a₃ = 5, a₄ = 13, a₅ = 29, a₆ = 61, a₇ = 125, a₈ = 253, ...

To check if an element is divisible by 5, we only need to look at the units digit of the number, since any multiple of 5 ends in 5 or 0. From the sequence, we can see that the units digit of a₃ is 5, so a₃ is divisible by 5. To find any other elements that are divisible by 5, we can look for a pattern in the units digits of the terms. We can see that the units digits of the terms cycle through 5, 3, 1, and 9. Since 5 appears in the cycle, every third term of the sequence will be divisible by 5. Therefore, the only elements of the sequence that are divisible by 5 are a₃, a₆, a₉, a₁₂, and so on.

To find which elements of the sequence are divisible by 13, we can use a similar approach. We need to find the remainder of each element when divided by 13. From the sequence, we can see that the units digit of a₄ is 3, so a₄ is not divisible by 13. To find any other elements that are divisible by 13, we can look for a pattern in the remainders of the terms. We can see that the remainders cycle through 3, 8, 6, and 10. Since 10 appears in the cycle, every fourth term of the sequence will be divisible by 13. Therefore, the only elements of the sequence that are divisible by 13 are a₄, a₈, a₁₂, a₁₆, and so on.

To find if any elements of the sequence are divisible by 65=5.13, we need to find elements that are divisible by both 5 and 13. From our analysis above, we can see that a₃ is the only element of the sequence that is divisible by 5, and a₄ is the only element that is divisible by 13. Therefore, there are no elements of the sequence that are divisible by 65, since the only way a number can be divisible by 65 is if it is divisible by both 5 and 13.

Learn more about integers here: brainly.com/question/15276410

#SPJ4

Complete question:

Consider the sequence a₁ = = 2¹-3=-1₁ -2²-3=1, 0₂= 03 =2³-3=5, 04-2¹-3=13, ⠀ a₁ = 2" - 3, defined for positive integers n. Which elements of this sequence are divisible by 5? What about 13? Are any elements of this sequence divisible by 65= 5. 13? Why or why not?​

(a) Probability that both numbers are odd = 0.4932

(b) Probability that both numbers are less than 12 = 0.4545

(c) Probability that the same number is chosen twice = 1/60

(a) To find the probability that both numbers are odd, we need to count the number of ways to choose two odd numbers between 1 and 60, and divide by the total number of possible outcomes.

There are 30 odd numbers between 1 and 60, so there are 30 choices for the first number and 29 choices for the second number (since the two numbers can be the same). The total number of possible outcomes is 60 choose 2, which is

60 choose 2 = (60 × 59) / 2 = 1770

So the probability that both numbers are odd is

(30 × 29) / 1770 = 0.4932

(b) To find the probability that both numbers are less than 12, we need to count the number of ways to choose two numbers between 1 and 11, and divide by the total number of possible outcomes.

There are 11 choices for each number, so there are 11 × 11 = 121 possible outcomes. The number of ways to choose two numbers less than 12 is

11 choose 2 = (11 × 10) / 2 = 55

So the probability that both numbers are less than 12 is

55 / 121 = 0.4545

(c) To find the probability that the same number is chosen twice, we need to count the number of ways to choose a number, and then multiply by the probability that the same number is chosen again.

There are 60 choices for the first number, and only 1 choice for the second number if we want it to be the same as the first. So the probability that the same number is chosen twice is

1/60

So the probability that the same number is chosen twice is

(1/60) × 60 = 1/60

Learn more about probability here

brainly.com/question/11234923

#SPJ4

The density of the textbook which is in the rectangular prism with dimensions is 0.0738 grams per cubic centimeter.

Define density.

Density is the mass of a component per unit volume.

       →d = M/V,

where d is density, M is mass, and V is volume, is the expression for density. Grams per cubic centimeter are a standard unit of measurement for density.

 The volume of a component = length*breadth*height

Given:

length = 16cm; breadth = 10cm; height = 5cm; Mass = 59grams

The volume of the book = 16 * 10 * 5

                                         = 800 cm³

The density of the textbook = Mass/volume

                                               = 59/800

                                  Density = 0.07375 g/cm³

To know more about Density is:

brainly.com/question/29775886

#SPJ1

If a triangular pyramid has a base shaped like an equilateral triangle. its surface area is: 120.41 square feet.

To solve this problem, we can use the formula for the surface area of a pyramid:

Surface area = base area + (1/2) x perimeter of base x slant height

First, we need to find the area of the base, which is an equilateral triangle. The formula for the area of an equilateral triangle is:

Area = (square root of 3) / 4 x (side length)^2

Substituting the given values, we get:

Area = (square root of 3) / 4 x 9^2

Area = (square root of 3) x 20.25

Area = 11.06 (rounded to two decimal places)

Next, we need to find the perimeter of the base, which is simply 3 times the side length:

Perimeter = 3 x 9

Perimeter = 27

Finally, we can use the given slant height to find the surface area:

Surface area = 11.06 + (1/2) x 27 x 8.1

Surface area = 11.06 + 109.35

Surface area = 120.41 square feet (rounded to two decimal places)

Therefore, the surface area of the triangular pyramid is approximately 120.41 square feet.

Learn more about surface area here:https://brainly.com/question/16519513

#SPJ1

Answer:

In a circle, an exterior angle is formed when a side of a triangle is extended. The measure of the exterior angle is equal to the sum of the measures of the two intercepted arcs.

Let x be the measure of the exterior angle. Then we have:

x = 84° + 108°

x = 192°

Therefore, the measure of the exterior angle is 192°.

The least upper bound of the elements {8, 12} under the divisibility relation on the set {1, 2, 3, 6, 8, 12, 24, 36} is 24.

To find the least upper bound of a set of elements under a relation, we look for the smallest element in the set that is greater than or equal to all of the elements in the set.

Under the divisibility relation, an element a is said to be divisible by an element b (written as b divides a) if a is a multiple of b, that is, a = b * k for some integer k. For example, 8 divides 24 because 24 = 8 * 3.

We want to find the least upper bound of the elements {8, 12} under this relation on the set {1, 2, 3, 6, 8, 12, 24, 36}. That means we want to find the smallest element in the set that is a multiple of both 8 and 12.

We can list the multiples of 8 and 12 in the set as follows:

Multiples of 8: 8, 24

Multiples of 12: 12, 24, 36

We can see that the smallest element in the set that is a multiple of both 8 and 12 is 24.

Therefore, the least upper bound under the divisibility relation on the set {1, 2, 3, 6, 8, 12, 24, 36} is 24.

To know more about divisibility relation, refer here:

https://brainly.com/question/7492971#

#SPJ11

Answer:

216.8

Step-by-step explanation:

Pi times 13-Pi times 100

The equation of the line is y = -3x + 4.

The equation of a line can be represented in slope intercept form as follows:

y - mx + b

where

Hence, using (1, 1) and (0, 4)

Therefore,

m = 4 - 1 / 0 - 1

m = 3 / -1

m = -3

Hence, the y-intercept of the line is as follows:

y = -3x + b

4 = -3(0) + b

b = 4

Therefore, the equation of the line is y = -3x + 4

learn more on equation of a line here: https://brainly.com/question/14200719

#SPJ1

Answer:

11.52 feet

Step-by-step explanation:

The formula for the volume of a sphere is V = (4/3)πr³, where V is the volume and r is the radius.

We can rearrange the formula to solve for the radius:

r = (3V/4π)^(1/3)

Substituting the given volume V = 7,234.56 ft³, we get:

r = (3(7,234.56)/(4π))^(1/3) ≈ 11.52 ft

Therefore, the radius of the sphere is approximately 11.52 feet.

The answer would be  a) With Replacement 16,807 points will be in the sample space if batteries are selected.

The sample space with replacement would be 7^5 = 16,807 points. This means that when selecting five batteries from a bag of seven with replacement, the total number of points would be 16,807. This is because each of the five batteries could potentially be from the same brand, so the sample space would include all 16,807 possibilities of the combination of 5 batteries from the 7 available.

B) Without Replacement: The sample space without replacement would be 7P5 = 21,053 points. This means that when selecting five batteries from a bag of seven without replacement, the total number of points would be 21,053. This is because each of the five batteries must be from a different brand, so the sample space would include all 21,053 possibilities of the combination of 5 batteries from the 7 available.

In conclusion, the sample space would have more points if the batteries are selected without replacement compared to when the batteries are selected with replacement. This is because when batteries are selected without replacement, each of the five batteries must be from a different brand, whereas when batteries are selected with replacement, the same brand could be chosen multiple times.

To get more information about probability click here :

https://brainly.com/question/11234923

#SPJ11

Therefore , the solution of the given problem of arithmetic mean comes out to be A(n) = 130 + (n - 1)13  = 286 inches.

The usual values of a list are determined by adding up every single integer one of the items on the list, which are frequently referred to as the organization's objectives. The number of list items with the highest abundance is then used to adjust these average values. Mathematical growth trends are similar. The number 21 turns into seven by adding three to the true means of the digits 5, 7, and 9, which is 4.

Here,

We can use the explicit formula for an arithmetic sequence to symbolize the height of the bamboo plant after "n" days:

=> A(n) = a + (n - 1)d

Therefore, the following explicit method can be used to determine the height of the bamboo plant after "n" days:

=> A(n) = 130 + (n - 1)13

Adding "n = 13" to the calculation will yield the height of the bamboo plant after 13 days:

=> A(13) = 130 + (13 - 1)13

=> A(13) = 130 + 12(13)

=> A(13) = 286

As a result, the bamboo growth will reach a height of 286 inches after 13 days.

The right response is thus:

=> A(n) = 130 + (n - 1)13 , or 286 inches.

To know more about arithmetic mean ,visit

brainly.com/question/13000783

#SPJ1

Diameter = 16 mm

Radius = Diameter/2

= 16/2

= 8 mm

Total height of figure = 32 mm

Height of cylinder = 19 mm

Height of cone = 32 - 19

= 13 mm

Volume of cylinder = πr²h

Substituting the values of r and h in above formula,,

[tex] \longrightarrow \sf \pi \times {(8)}^{2} \times 19 \\ \\ \longrightarrow \sf \pi \times 64 \times 19 \\ \\ \longrightarrow \sf 1216 \pi \\ \\ \longrightarrow \sf 3820.17 \: mm^{3}\\ \\ [/tex]

Hence, Volume of cylinder is 3820.17 mm³

Now,

Volume of cone = 1/3 πr²h

[tex] \longrightarrow \sf \dfrac{1}{3} \times \pi \times {(8)}^{2}\times 13 \\ \\ \longrightarrow \sf \dfrac{1}{3} \times \pi \times 64 \times 13 \\ \\ \longrightarrow \sf 871.26~ mm^3 \\ \\ [/tex]

Hence, Volume of the cone is 871.26 mm³

Volume of composite figure = Volume of cylinder + Volume of cone.

= 3820.17 + 871.26

= 4691.43 mm³

Therefore, Volume of the composite figure is 4691.43 mm³.

Answer:

x = 118.5°

Step-by-step explanation:

the measure of the chord- chord angle x is half the sum of the measures of the arcs intercepted by the angle and its vertical angle, that is

x = [tex]\frac{1}{2}[/tex] (27 + 210)° = [tex]\frac{1}{2}[/tex] × 237° = 118.5°

The value of x in the given circle by secant lines is 118.5 degrees.

A circle is a shape consisting of all points in a plane that are at a given distance from a given point, the centre.

A straight line that intersects a circle in two points is called a secant line

A chord is in a unique secant line and every secant line defines a unique chord.

The measure of the angle x is half the sum of the measures of the arcs intercepted by the angle and its vertical angle

x=1/2(210+27)

x=1/2(237)

Divide two hundred thirty seven by two

x=118.5

Hence, the value of x in the given circle by secant lines is 118.5 degrees.

To learn more on Circles click:

https://brainly.com/question/11833983

#SPJ5

Answer:

6y

Step-by-step explanation:

because if u divde

Answer:

 (2,0). First use a graphing calculator called demos. graph the y=5x-10

Once you graph the equation. Look for the cooordinates of the graph. One the coordinates are 2,0

Step-by-step explanation: Hope this helps!! Mark me brainliest!! Have a great spring break!! :))

Answer:

10 + 2x

also,

2x + 10

Step-by-step explanation:

"a number value" is the unknown, so use a variable (letter) I used x, but could be almost any letter (avoid e and i, they have other math meanings)

"10 more than" means to add on 10. You can do that up front or at the end. Order is way more important for subtracting, so no worries here.

"product" means multiplying. So the "product of 2 and a number" is 2x.

So to translate this word phrase into an algebraic expression, you get:

10 + 2x

but also 2x + 10 is the same thing.

Answer:

The line y = 2 - 5/20 can be simplified to y = 2 - 1/4 = 7/4.

Substituting y = 7/4 into the equation of the circle, we get:

(x - 5)² + (7/4 + 1)² = 25

(x - 5)² + (15/4)² = 25

(x - 5)² = 25 - (15/4)²

x - 5 = ±√(25 - (15/4)²)

x = 5 ± √(25 - (15/4)²)

Simplifying, we get:

x = 5 ± √(400/16 - 225/16)

x = 5 ± √(175/16)

x = 5 ± (√175)/4

Therefore, the two intersection points are:

Left point: (5 - (√175)/4, 7/4)

Right point: (5 + (√175)/4, 7/4)

Therefore, the correct answer is option D: "The wire is on the cylinder axis and carries current i in the direction opposite to that of the current in the shell. "Option E, "the wire does not carry any current," is not correct because the wire is in a region with a magnetic field, and therefore will have an induced current.

we are asked to determine the position and direction of the wire that is parallel to the cylinder axis in the hollow region. The long straight cylindrical shell has an inner radius R and an outer radius Ro, and carries a current i that is uniformly distributed over its cross section. The wire is located in the hollow region, which is defined as r > R and r < Ro.

Based on this information, we can determine the position and direction of the wire.To begin, we know that the wire must be on the cylinder axis since it is parallel to the axis. This eliminates options A, B, and C. Additionally, we know that the current in the wire must be in the opposite direction to the current in the shell. This is because the magnetic field created by the current in the shell will induce a current in the wire that is opposite in direction in order to create a repulsive force.

for such more questions on magnetic field

https://brainly.com/question/14411049

#SPJ11

The percentage of fat in a 200 calorie peanut butter sandwich is 40%.

To find the percentage of fat in a 200 calorie peanut butter sandwich if the total amount of calories of fat are 80 calories, we need to use the formula:

Percentage of fat = (Calories of fat / Total calories) x 100

Let's substitute the given values in the above formula:

Calories of fat = 80

Total calories = 200

Percentage of fat = (80/200) x 100 = 40%

Therefore, the percentage of fat in a 200 calorie peanut butter sandwich is 40%.

To learn more about percentage refer :

https://brainly.com/question/24165856

#SPJ11

Answer:

a. After 10 minutes of hiking, Kiran will have covered a distance of:

distance = rate × time

distance = 0.04 mile/min × 10 min

distance = 0.4 mile

So, his remaining distance on the trail will be:

remaining distance = total distance - covered distance

remaining distance = 1.8 mile - 0.4 mile

remaining distance = 1.4 miles

Therefore, Kiran's remaining distance on the trail after 10 minutes of hiking is 1.4 miles.

b. We can use the same formula to find out how far Kiran will have walked after a certain amount of time:

distance = rate × time

We know that Kiran walks at a rate of 0.04 mile a minute, and we want to find out how much time it will take him to cover the remaining distance of 0.2 mile. So we can rearrange the formula to solve for time:

time = distance / rate

time = 0.2 mile / 0.04 mile/min

time = 5 minutes

Therefore, Kiran will have 0.2 mile left on the trail after 5 minutes of walking.

Please mark this answer as Brainliest by clicking the crown under this answer!!

Hence, the likelihood is 11/80, or roughly 0.138 as the player represented Spain, the likelihood that a randomly chosen athlete.

The likelihood or chance of an event occurring is measured by probability. It is a number between 0 and 1, where 0 denotes the impossibility of an event and 1 denotes its certainty. By dividing the number of favorable outcomes by the total number of possible outcomes, one can determine the probability of an occurring. Because there is only one desirable result (rolling a 3) out of six potential outcomes, the probability of rolling a 3 when using a fair six-sided die is 1/6. (rolling a 1, 2, 3, 4, 5, or 6).

given

The number of gold, silver, and bronze medals each player from each nation has earned is displayed in the table.

We need to utilize conditional probability to determine the likelihood that a randomly chosen player won a bronze medal provided that the player represented Spain.

The following formula determines the conditional probability of an event B given an event A:

P(A and B) = P(B|A) (A)

where P(A) is the likelihood that event A will occur and P(A and B) is the likelihood that events A and B will both occur.

In this instance, event A was the player representing Spain, and event B was the bronze medal the player took home.

The table reveals that 11 bronze medals were won by Spanish athletes. Moreover, the total number of medals won by Spanish athletes is:

20 + 18 + 42 = 80

Hence, given that the player represented Spain, the likelihood that a randomly chosen athlete would have earned a bronze medal is:

P(B|A) = 11/80

Hence, the likelihood is 11/80, or roughly 0.138 as the player represented Spain, the likelihood that a randomly chosen athlete.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

The percentage of people aged 55-64 who answered “yes” was slightly lower (50%), followed by people aged 65-74 (45%) and people over 75 (43%).

Percentage is a way of expressing a number as a fraction of 100. It is denoted by the symbol “%” and is used to compare values or express change. It can be used to compare two or more numbers, to show how much one number is a percentage of another, or to indicate the rate of change. In mathematics, percentages are often used to compare the size of one number to the size of another number.

The bar chart shows that the percentage of people who responded “yes” to listening to audiobooks increases with age. Only 18% of people aged 18-24 said they listen to audiobooks, while 30% of people aged 25-34 and 44% of people aged 35-44 responded positively. The percentage continues to increase with age, with the highest percentage of people aged 45-54 saying they listen to audiobooks (54%).
The percentage of people aged 55-64 who answered “yes” was slightly lower (50%), followed by people aged 65-74 (45%) and people over 75 (43%).

To learn more about percentage
https://brainly.com/question/24877689
#SPJ1

No, since the ratios do not constitute a whole. Option(a) is the required response to the posed query.

A collection of categorical data can be summarised using a bar chart, and continuous data can be made categorical using auto-binning. The bar chart uses several bars to show data, with each bar denoting a distinct category.

A pie chart, also known as a circle chart, is a visual representation of the various values of a given variable or a way to summarise a collection of nominal data. This kind of chart consists of a circle with numerous parts. A specific group is represented by each segment. A pie chart is useful for organising and displaying data by proportion of the total.

To know more about pie chart, visit:

https://brainly.com/question/26851221

#SPJ1

The rest of the question is,

Would it be appropriate to display the data with a pie chart?

a). No, because the proportions are not parts of a whole.

b). No, because the data categories are too broad.

c). Yes, because the data are grouped into categories.

d). Yes, because the data can be represented by a relative frequency compared to the whole.