The attraction that nonpolar molecules have for each other is primarily caused by the presence of what?
(a) Van der Waal's forces. Van der Waal's forces are weak electrostatic interactions between non-polar molecules.
These weak forces arise from the fluctuating dipoles within the molecules, which cause temporary charges to develop and attract each other. This attraction leads to the formation of weak intermolecular bonds, which are mainly responsible for the attraction between non-polar molecules. These forces are weak in comparison to other intermolecular forces, such as hydrogen bonding and ionic bonds, but are still important for the stability of non-polar molecules and their ability to dissolve in other non-polar solvents.Van der Waals forces are attractive intermolecular forces between molecules caused by the fluctuating dipole moments of molecules.
learn more about ionic bonds Refer:brainly.com/question/11527546
#SPJ1
complete question:The attraction that non-polar molecules have for each other is primarily caused by —
(a) Van der Waal's forces (b) Difference in electronegativities
(c) Hydrogen bonding (d) High ionisation energy
Question 7 of 10
When naming a molecule, how do you indicate that the carbons on either side
of the double bond are pointing in opposite directions?
OA. Use the prefix cis-.
OB. Use the prefix methyl-.
OC. Use the number 2 as a prefix.
OD. Use the prefix trans-.
Answer:
by using the prefix trans
Explanation:
i hope you find it helpful
0.487 grams of quinine (molar mass = 324 g/mol) is combusted and found to produce
1.321 g CO2, 0.325 g H2O and 0.0421 g nitrogen. Determine the empirical and molecular
formulas.
The empirical and molecular formulas of the quinine would be C40H48N and C23H27N respectively.
Empirical and molecular formulasTo determine the empirical formula, we need to find the mole ratios of each element in the compound.
First, let's calculate the number of moles of each product:
moles of CO2 = 1.321 g / 44.01 g/mol = 0.0300 molmoles of H2O = 0.325 g / 18.015 g/mol = 0.0180 molmoles of N2 = 0.0421 g / 28.01 g/mol = 0.00150 molNext, let's find the number of moles of each element:
moles of C = moles of CO2 = 0.0300 molmoles of H = 2 x moles of H2O = 0.0360 molmoles of N = 0.5 x moles of N2 = 0.00075 molNow, we can find the empirical formula by dividing each mole value by the smallest mole value:
C: 0.0300 mol / 0.00075 mol = 40H: 0.0360 mol / 0.00075 mol = 48N: 0.00075 mol / 0.00075 mol = 1The empirical formula is C40H48N.
To find the molecular formula, we need to determine the molecular mass of the compound. The empirical formula mass is:
Empirical formula mass = (40 x 12.01 g/mol) + (48 x 1.01 g/mol) + (1 x 14.01 g/mol) = 549.88 g/mol
Molecular formula factor = 324 g/mol / 549.88 g/mol = 0.5899
Molecular formula = 0.5899 x (C40H48N) = C23H27N
More on empirical and molecular formulas can be found here: https://brainly.com/question/14425592
#SPJ1
what is the product of a reaction 4-acetyl anisole with HI(t°C)?
Answer:
The reaction of 4-acetyl anisole (also known as p-methoxyacetophenone) with hydroiodic acid (HI) results in the cleavage of the O-methyl group of the anisole ring, leading to the formation of iodobenzene and acetophenone. The balanced equation for this reaction is C9H10O2 + HI → C6H5I + C8H8O.
So, the product of the reaction of 4-acetyl anisole with HI is a mixture of iodobenzene and acetophenone. The specific ratio of these products will depend on the reaction conditions, such as the temperature and concentration of the reactants.
It's worth noting that the reaction between 4-acetyl anisole and HI is an example of a nucleophilic aromatic substitution reaction, which involves the replacement of a leaving group (in this case, the O-methyl group) on an aromatic ring by a nucleophile (the iodide ion from HI).
3. A student obtained the following data using the procedure used in this experiment.
BEFORE IGNITION
mass of crucible + crucible cover = 34.12 g
mass of crucible + cover + unknown sample = 36.65 g
AFTER IGNITION
mass of crucible + cover + unknown (1st weighing) = 35.67 g
mass of crucible + cover + unknown (2nd weighing) = 35.23 g
mass of crucible + cover + unknown (3rd weighing) = 35.20 g
Calculate the % water in the unknown sample:_______?
The percent of water in the unknown sample is calculated as 57.3%.
What is ignition?Process of providing energy that is required to initiate a combustion process is called ignition.
mass of crucible + cover + unknown sample = 36.65 g
mass of crucible + cover = 34.12 g
mass of unknown sample = (36.65 g - 34.12 g) = 2.53 g
mass of water lost during ignition:
mass of unknown sample (before ignition) = 2.53 g
mass of unknown sample (after 1st weighing) = 35.67 g - 34.12 g = 1.55 g
mass of unknown sample (after 2nd weighing) = 35.23 g - 34.12 g = 1.11 g
mass of unknown sample (after 3rd weighing) = 35.20 g - 34.12 g = 1.08 g
total mass of water lost during ignition = (2.53 g - 1.08 g) = 1.45 g
As % water in unknown sample = (mass of water lost / mass of unknown sample) x 100%
= (1.45 g / 2.53 g) x 100%
% water in unknown sample = 57.3%
Therefore, percent of water in the unknown sample is 57.3%.
To know more about ignition, refer
https://brainly.com/question/28270114
#SPJ1
Hydrogen cyanide is a highly poisonous substance that can be prepared by the reaction of methane and ammonia:
CH4 (g) + NH3 (g) → HCN(g) + 3 H2 (g)
What is the heat of reaction at constant pressure? Provide an answer correct to 3 significant figures. Do not use scientific notation or include units to report your answer. You do need to include the sign as a part of your answer.
N2 (g) + 3 H2 (g) → 2 NH3 (g) ΔHrxn = -91.8 kJ;
C(s) + 2 H2 (g) → CH4 (g) ΔHrxn = -74.9 kJ;
2 C(s) + H2 (g) + N2 (g) → 2 HCN(g) ΔHrxn = +270.3 kJ
The heat of reaction at constant pressure when methane is reacted with ammonia to form hydrogen cyanide is 103.6kJ.
Given that Hydrogen cyanide which is a highly poisonous substance can be prepared by the reaction of methane and ammonia as follows:
[tex]CH_4 (g) + NH_3 (g) -- > HCN(g) + 3 H_2 (g)[/tex]
This is obtained through the following steps:
[tex]N_2 (g) + 3 H_2 (g) -- > 2 NH_3 (g)[/tex]; ΔHrxn = -91.8 kJ;
[tex]C(s) + 2 H_2 (g) -- > CH_4 (g)[/tex]; ΔHrxn = -74.9 kJ;
[tex]2 C(s) + H_2 (g) + N_2 (g) -- > 2 HCN(g)[/tex]; ΔHrxn = +270.3 kJ
The heat of reaction at constant pressure is the sum of the individual reactions such that:
[tex]\delta Hrxn = -91.8 kJ + (-74.9 kJ) + (270.3 kJ) = 103.6 kJ[/tex]
The heat of reaction is the total amount of energy released or absorbed when a chemical reaction occurs. It is calculated by adding the enthalpies of the reactants and subtracting the enthalpies of the products. Hence it concludes that when methane and ammonia react to form hydrogen cyanide, 103.6 kJ of energy is released.
To learn more about heat click here https://brainly.com/question/16648056
#SPJ1
Which of the following bulk properties of substances are affected by intermolecular forces? Select all that apply.
A. ductility
B. boiling point
C. volatility
D. malleability
E. melting point
B. melting point; C. volatility; and E. boiling point. Intermolecular forces, which occur between molecules and are either attracted or repulsive, are crucial in determining the general properties of things.
Which of the following intermolecular force types is prevalent throughout all matter and has a high melting and boiling point for water?Comparatively to nonpolar molecules, which just have LDF, substances with dipole-dipole attractions typically have higher melting and boiling temperatures.
What general characteristics characterise intermolecular forces?The melting and boiling temperatures of solids and liquids are bulk characteristics that are governed by intermolecular forces. When molecules in a liquid have enough thermal energy, they can break free from the forces that hold them together and produce vapour bubbles.
To know more about molecules visit:-
https://brainly.com/question/30465503
#SPJ9
what is the summary of this paragraph, Supporting Human Activities Clean drinking water is necessary for all humans. Many humans use water at home for bathing, cleaning, and watering lawns and gardens. More fresh water is used in industry than is used in homes. Over 20% of the fresh water used by humans is used for industrial purposes- to manufacture goods, cool power stations, clean industrial products, extract minerals, and generate energy by using hydroelectric dams. More water is used for agriculture than industry. Most water used for agriculture is used to irrigate crops. It is also used to care for farm animals.
The summary of this paragraph is that getting enough clean water every day is important for the health and and drinking water is necessary for all humans not only for insstrial purposes.
What is the summary?Accessing to safe and clean drinking water is a basic human right and a fundamental requirement for human survival and well-being. Clean drinking water is crucial for maintaining good health and preventing waterborne diseases that can lead to illness, disability, and even death.
Unfortunately, many people around the world still lack access to safe and clean drinking water, and this can have severe consequences on their health and livelihoods. Inadequate access to clean water is a leading cause of preventable deaths, particularly in developing countries.
Learn more about summary at:
https://brainly.com/question/25605883
#SPJ1
When dinitrogen pentoxide, N₂O5, a white solid, is heated, it decomposes to nitrogen dioxide and oxygen. How many grams of oxygen can be formed from the decomposition of 2.3 g of N₂05?
2N₂05 (s)—>4NO₂(g) + O₂(g)
The mass of the oxygen that can be obtained by the use of the stoichiometry of the reaction is 0.35 g.
How is stoichiometry applied?Stoichiometry is applied in chemistry to calculate the quantities of reactants and products involved in a chemical reaction. It involves using the balanced chemical equation of the reaction to determine the mole ratios of reactants and products, and then using these ratios to calculate the amount of one substance that is required to produce a given amount of another substance.
We know that;
Moles of N2O5 = 2.3g/108 g/mol
= 0.021 moles
2 moles of N2O5 would produce 1 moles of O2
0.021 moles would produce 0.021 * 1/2
= 0.011 moles
Mass of O2 = 0.011 moles * 32 g/mol
= 0.35 g
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
At a constant temperature and pressure, there are initially 0.6400 moles in a balloon with a volume of 4.00 L. Gas is removed until there is a total of 0.3500 moles. Calculate the volume of the balloon after this change.
The volume of the balloon after the change is approximately 2.19 L. The gas laws behaviour of gases by providing relationships between the temperature, moles, volume and pressure
What is gas law?We can use the combined gas law to solve this problem: (P1V1)/(n1T1) = (P2V2)/(n2T2) where P is the pressure, V is the volume, n is the number of moles, and T is the temperature.
We can assume that the temperature and pressure remain constant, so T1 = T2 and P1 = P2.
Therefore, we can simplify the equation to: (V1/n1) = (V2/n2)
Substituting the given values, we get: (V1/0.6400) = (V2/0.3500)
Solving for V2, we get: V2 = (0.3500/0.6400) * V1 V2 = 0.5469 * V1
The volume of the balloon after the change is 0.5469 times the original volume, or: V2 = 0.5469 * 4.00 L = 2.1876 L
To know more about gas laws visit:-
brainly.com/question/27009857
#SPJ1
Enter the chemical formula for the cation present in the aqueous solution of Cu(C2H3O2)2.
Express your answer as a chemical formula. Do not include coefficients or phases in your response.
We must utilize the charge of the anion to calculate the charge on the cation. The ion of acetate is CH3CO2. A polyatomic ion with a charge of -1 is what it is.
When Pb NO3 2 aq and K2SO4 aq are combined, what would be the formula of the precipitate that results?Lead sulfate (PbSO4) and potassium nitrate are created by a twofold displacement reaction between potassium sulfate (K2SO4) and lead nitrate (Pb(NO3)2) (KNO3). Water is unable to dissolve lead sulfate (PbSO4), which manifests as a precipitate that is white in color.
What precipitate results from the reaction between NaOH and NiNO3 2 aqueous solutions?Nickel hydroxide and sodium nitrate are the products of the reaction between sodium hydroxide and nickel nitrate. A precipitate with a light green hue will occur as a result.
to know more about chemical formulas here;
brainly.com/question/29031056
#SPJ1
A mixture of 7.5 g
CH4
and 7.5 g
Xe
is placed in a container and the total pressure is found to be 0.52 atm
Find the partial pressure of CH4?
.
The partial pressure of CH₄ in the mixture is 0.464 atm.
What is the partial pressure of the CH₄?To find the partial pressure of CH₄ in the mixture, we need to use the following formula:
Partial pressure of CH₄ = Total pressure × mole fraction of CH₄
To calculate the mole fraction of CH₄, we need to first calculate the moles of each gas present in the mixture.
The number of moles can be calculated using the following formula:
moles = mass ÷ molar mass
The molar mass of CH₄ is 16.04 g/mol and the molar mass of Xe is 131.29 g/mol.
Moles of CH₄ = 7.5 g ÷ 16.04 g/mol = 0.467 mol
Moles of Xe = 7.5 g ÷ 131.29 g/mol = 0.057 mol
The total number of moles in the mixture is the sum of the moles of CH₄ and Xe:
Total moles = 0.467 mol + 0.057 mol = 0.524 mol
Now we can calculate the mole fraction of CH₄:
Mole fraction of CH₄ = Moles of CH₄ ÷ Total moles = 0.467 mol ÷ 0.524 mol = 0.891
Finally, we can use the formula for partial pressure to find the partial pressure of CH₄:
Partial pressure of CH₄ = Total pressure × mole fraction of CH₄
Partial pressure of CH₄ = 0.52 atm × 0.891 = 0.464 atm
Learn more about partial pressure here: https://brainly.com/question/19813237
#SPJ1
Consider the cis and trans structures of 1,5 dimethyl decline.which one will be more stable?..
Explanation:
In the case of trans-decalin, there is no steric interaction between the rings because they are at their maximum distance. As a result, the trans conformation is more stable. Another reason is that trans-decalin does not undergo ring flipping. So, it remains rigid and is more stable.
Stearic interactions between the two rings result in a less stable conformation in case of cis-decalin.It undergoes ring flipping so, unstable conformation. (The First image)
Hence, trans-decalin is more stable than cis-decalin.(The second image)
Hopefully this helps! :)
Need help with this please and thank you. PBS poisoned water student questions
Lead damages the brain and central nervous system at high exposure levels, resulting in unconsciousness, convulsions, and even death. These are effects of lead poisoning.
Does lead poisoning have an impact on next generations?Up to 800 million children worldwide, or close to one third of all children, suffer from lead poisoning. A child's developing brain is impacted by lead, which results in diminished IQ, behavioral abnormalities, and learning issues that can lower potential earnings in adulthood.
In the US, how much lead is permissible in drinking water?The Safe Drinking Water Act (SDWA) reduced the maximum permitted lead level, or "lead-free" content, to a weighted average of 0.25 percent calculated over the wetted surfaces of pipes, pipe fittings, plumbing fixtures, and fixtures, and 0.2 percent for solder and flux.
To learn more about lead poisoning visit:
brainly.com/question/3437008
#SPJ1
Why is lead toxic to the body? How much lead is legally allowed in the drinking water in the US? How is it possible that lead poisoning affects the future generations?
5. A 1.0 L sample of a pure gas is found to have a lower pressure than that predicted by the ideal gas law. The best explanation for the observation is that the molccules of the gas
(A) have a combined volume that is too large to be considered negligible when compared to the volume of the container
(B) have a low molecular mass and therefore do
no sinkc the container walls with as much force as expected
(C) are attracted to each other and do not exert as much force on the container walls as they would if they had no mutual attractions
(D) are attracted to the sides of the container and strike the container walls with more force
than expected
Molecules of the gas are attracted to each other and do not exert as much force on the container walls as they would if they had no mutual attractions. Option C
Ideal gas problemThe best explanation for a pure gas having a lower pressure than predicted by the ideal gas law is that the molecules of the gas are attracted to each other and do not exert as much force on the container walls as they would if they had no mutual attractions.
The ideal gas law assumes that gas molecules do not interact with each other and have no volume, which is not true for real gases. In real gases, the molecules do interact with each other, and they do have a finite volume.
As a result, the pressure of a real gas can be lower than predicted by the ideal gas law. This effect is more pronounced at high pressures and low temperatures, where the interactions between gas molecules are stronger.
More on ideal gas can be found here:https://brainly.com/question/13463215
#SPJ1
ingitis, but, it also occurs when bacteria dir eninges. This may be caused by an ear or sinus infection and or s Define the term meningitis. 1 2 Mention SIX typical complications of meningitis. List FOUR signs and symptoms of meningitis. Discuss THREE steps of treating a person with meningitis Mention the TWO types of meningitis. right reserved TO
Meningitis is an inflammation of the meninges, which are the membranes that cover the brain and spinal cord. It can be caused by a bacterial or viral infection, with bacterial meningitis being the most serious and potentially life-threatening form.
What are Some common complications of meningitis?Septicemia: This is a serious bloodstream infection that can occur as a result of meningitis. It can cause organ failure and can be fatal.
Brain swelling: Meningitis can cause the brain to swell, which can lead to increased pressure inside the skull and can cause damage to brain tissue.
Hearing loss: Meningitis can damage the inner ear and cause hearing loss, which can be permanent.
Vision loss: In some cases, meningitis can cause damage to the optic nerve and lead to vision loss.
Cognitive impairment: Meningitis can cause long-term cognitive impairment, including problems with memory, attention, and other cognitive functions.
Seizures: Meningitis can cause seizures, which are sudden and uncontrolled bursts of electrical activity in the brain.
Some common signs and symptoms of meningitis include:
Headache
Stiff neck
Fever
Nausea and vomiting
The treatment of meningitis typically involves three main steps:
Antibiotics or antiviral medications: Depending on the cause of the infection, antibiotics or antiviral medications may be prescribed to fight the infection.
Supportive care: This may include medications to reduce fever and pain, as well as intravenous fluids to prevent dehydration.
Hospitalization: Most cases of meningitis require hospitalization for close monitoring and treatment.
Conclusively, there are two main types of meningitis: bacterial meningitis and viral meningitis. Bacterial meningitis is more severe and can be life-threatening if not treated promptly, while viral meningitis is typically less severe and often resolves on its own without treatment.
Learn more about meningitis from
https://brainly.com/question/30469777
#SPJ1
Calculate the hydronium ion concentration, [H3O+] , for a solution with a pH of 10.68 . [H3O+]= M
We know that pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance which is defined as the negative base 10 logarithm of the activity of hydrogen ions. Which states -
pH= - log [H⁺]= - log [H₃O⁺]As per question, we are given a pH value which is 10.68 for a solution and have asked to find out the hydronium ion concentration. Since we have the value of pH, so we can put into the formula and solve for [H₃O⁺] -
[tex] \:\:\:\:\:\:\longrightarrow \sf pH = 10.68\\[/tex]
[tex] \:\:\:\:\:\:\longrightarrow \sf - log [H₃O⁺] = 10.68 \\[/tex]
[tex] \:\:\:\:\:\:\longrightarrow \sf [H₃O⁺] = 10^{-10.68}\\[/tex]
[tex] \:\:\:\:\:\:\longrightarrow \sf \underline{[H₃O⁺] = 2.0893 \times 10^{-11}\:M} \\[/tex]
Therefore, the hydronium concentration for the solution is [tex]\underline{\: \sf 2.0893 \times 10^{-11}\:M }\\[/tex]
At a certain temperature, 0.4011 mol of N2 and 1.501 mol of H2 are placed in a 4.50 L container.
N2(g)+3H2(g)↽−−⇀2NH3(g)
At equilibrium, 0.1401 mol of N2 is present. Calculate the equilibrium constant, c.
Kc=??
The equilibrium constant of the reaction shown by the illustration would be 4.315.
Equilibrium constant calculationThe balanced equation for the reaction is:
N2(g) + 3H2(g) ⇌ 2NH3(g)
The equilibrium constant expression for this reaction is:
Kc = [NH3]^2 / ([N2] * [H2]^3)
We are given the initial and equilibrium concentrations of N2 and H2, and the equilibrium concentration of NH3 can be calculated as follows:
[NH3] = 2 * [N2]initial - [N2]equilibrium
[NH3] = 2 * 0.4011 mol - 0.1401 mol = 0.6621 mol
Substituting the concentrations into the equilibrium constant expression, we get:
Kc = (0.6621 mol)^2 / (0.1401 mol * 1.501 mol^3)
Kc = 4.315
Therefore, the equilibrium constant for this reaction at the given temperature is 4.315.
More on equilibrium constant can be found here: https://brainly.com/question/15118952
#SPJ1
20.00 mL of 1.40 M HCl diluted to 0.430 L.
What is the pH?
We calculate the pH using the equation pH = -log(Ka), which informs us that a solution with 1.0 106 hydrogen ions has a pH of -log(1.0 106) = 7.39.
When diluted with water, what pH will HCl have?According to the provided data, the pH of hydrochloric acid is 2, indicating that it has an acidic nature. The pH will rise to 7 on dilution, or when we add water to the solution. If it includes more hydrogen ions than hydroxide ions, the pH will be lower than 7.
Does HCl dilution affect pH?When an acid solution is diluted, the pH rises. As an illustration, dilute 10.0 mL of 0.1 M HCl to 30.0 mL.
To know more about hydrogen ions visit:-
brainly.com/question/7641960
#SPJ1
When the volume of a gas is changed from ___ mL to 852 mL, the temperature will change from 588 K to 725 K.
V(volume) = [?] mL
Assume that the number of moles and the pressure remain constant.
Answer:
the volume of a gas is changed from ___ mL to 852 mL, the temperature will change from 588 K to 725 K.V(volume) = [?] mLAssume that the number of moles and the pressure remain constant.To find the initial volume of the gas, we can use the combined gas law, which states that: (P1V1)/T1 = (P2V2)/T2 We are given the initial temperature T1 = 588 K and the final temperature T2 = 725 K. We are also told that the number of moles and the pressure remain constant, so we can assume that P1 = P2 and n1 = n2. Let's plug in the values we have: (P1V1)/588 = (P1*852)/725 Simplifying this equation, we can isolate V1: V1 = (588*852)/725 V1 = 691.2 mL Therefore, the initial volume of the gas was 691.2 mL.
In the context of this problem, we can utilize Charles's Law which states the volume of a gas is directly proportional to its absolute temperature. We solve for the unknown volume (V1) using the provided values and the formula derived from Charles's Law. The estimated answer is approximately 686 mL.
Explanation:The subject of your question involves the concept of gas laws specifically the Charles's Law which states that the volume of a gas is directly proportional to its absolute temperature, provided the number of moles and pressure remain constant. In this scenario, we can apply Charles's Law as both the number of moles and pressure are constant. To find the unknown volume, we should use the formula (V1/T1) = (V2/T2), where V1 is the unknown volume, T1 is the initial temperature, V2 is the final volume and T2 is the final temperature. In this case, the question left V1 blank, T1 is 588K, V2 is 852 mL and T2 is 725K. So its critical to ensure that temperatures are in Kelvin.
Arranging the formula to solve for V1, we have: V1 = (V2 * T1) / T2. Substituting the given values, we get: V1= (852 mL * 588 K) / 725 K = 685.9 mL
Therefore, the unknown volume V1, when the gas was initially at a temperature of 588K, would be approximately 686 mL.
Learn more about Charles's Law here:https://brainly.com/question/35451979
#SPJ2
of the following two gases which would you predict to diffuse more rapidly CH4 H2
H2
Factors that affect the rate of diffusion of a gas including the density of the gas temperature concentration difference and diffusion distance. The density of the diffusing gas depends on how high light is or how heavy the gas is.
Add any nonzero formal charges to the atoms as applicable for the lewis structure shown with connectivity c–s–s. all valence electrons have been included, and this structure follows the octet rule. if formal charges are equal to zero, they should not be included.
Carbon would therefore have a formal charge of 0, Sulfur 1 would have a formal charge of 1, and Sulfur 2 would have a formal charge of 1.
How can nonzero formal charge be found?For each atom in a Lewis structure, you should count how many electrons it "owns" in order to get the formal charges. All of its lone pair electrons as well as 50% of its bonding electrons should be counted. The formal charge is the discrepancy between the atom's number of valence electrons and the number it possesses.
Which has an atom's core having no formal charge?For organic chemists, carbon is the most significant element. Four bonds are made to the carbon atom in the structures of methane, methanol, ethane, ethene, and ethyne.
To know more about Carbon visit:-
https://brainly.com/question/22530423
#SPJ1
1. Baby Sarah weighed over 13 lbs. at birth and has been gaining further weight steadily. Her
mother has noticed a sharp pain between her shoulder blades whenever she picks Sarah
up to put her in a high chair. Which muscle has Sarah's mother most likely strained? Explain
why you selected this muscle.
2. Chuck was the coach of a leading baseball team until his best pitcher went on the disabled
list with a shoulder injury. What is the most likely type of injury to this player? What specific muscles are most likely involved? Is there one muscle that would be more
commonly injured in this situation?
the supraspinatus muscle is the most commonly injured muscle in this situation because it is responsible for initiating shoulder abduction, which is an important movement in the throwing motion.
The solution are as follows :-
1.Sarah's mother most likely strained her trapezius muscle. The trapezius muscle is a large triangular-shaped muscle that runs along the upper back and neck and is responsible for moving the shoulder blades and supporting the arms. When picking up a heavy object such as a baby, the trapezius muscle is activated, and if the muscle is strained or overused, it can cause sharp pain between the shoulder blades. The fact that Sarah's mother experiences this pain only when picking up her baby suggests that the weight of the baby is causing the strain.
2.The most likely type of injury to the baseball pitcher is a rotator cuff injury. The rotator cuff is a group of muscles and tendons that surround the shoulder joint and are responsible for stabilizing and moving the shoulder. Pitchers are at high risk for rotator cuff injuries due to the repetitive and forceful motion of throwing a baseball. The specific muscles that are most likely involved in a rotator cuff injury are the supraspinatus, infraspinatus, teres minor, and subscapularis muscles. However, the supraspinatus muscle is the most commonly injured muscle in this situation because it is responsible for initiating shoulder abduction, which is an important movement in the throwing motion.
To know more about weight visit :-
https://brainly.com/question/86444
#SPJ1
Suppose you heat a metal object with a mass of 33.6 g to 95.8 °C and transfer it to a calorimeter containing 100.0 g of water at 17.4 °C. The water and metal reach a final temperature of 23.8 °C.
The heat absorbed by the calorimeter is 2222.2 J when a metal object with a mass of 33.6 g is heated to 95.8°C and then transferred to a calorimeter containing 100.0 g of water at 17.4°C, with the final temperature of the water and metal being 23.8°C.
What is the heat absorbed by the calorimeter when a metal object is heated and transferred to water in a calorimeter?
To solve this problem, we can use the equation:
Q = m * c * ΔT
where Q is the heat absorbed or released, m is the substance's mass, c is the specific heat capacity, and T is the temperature change
First, we can calculate the heat absorbed by the metal object when it is heated from its initial temperature to the final temperature:
Qmetal = m * cmetal * ΔTmetal
Qmetal = 33.6 g * (0.385 J/g°C) * (23.8°C - 95.8°C)
Qmetal = -3684.4 J
Here, we have used a negative sign because the metal object loses heat to the surroundings.
Next, we can calculate the heat absorbed by the water and calorimeter when they are cooled from their initial temperature to the final temperature:
Qwater = (mwater + mcalorimeter) * cwater * ΔTwater
Qwater = (100.0 g + 50.0 g) * (4.184 J/g°C) * (23.8°C - 17.4°C)
Qwater = 1462.2 J
Here, we have used the combined mass of water and calorimeter, since they both experience the same temperature change.
Finally, we can use the principle of conservation of energy to equate the heat absorbed by the metal to the heat absorbed by the water and calorimeter:
Qmetal = -Qwater
-3684.4 J = -1462.2 J + Qcalorimeter
Solving for Qcalorimeter, we get:
Qcalorimeter = 2222.2 J
Therefore, the heat absorbed by the calorimeter is 2222.2 J.
To learn more about calorimeter, visit: https://brainly.com/question/1407669
#SPJ1
Select the options that correctly reflect the mass ratios and mass percentages of the elements in SO3
1. The mass ratio of S is .400
2. The mass percentage of O is 60%
The options "The mass ratio of S is .400 and The mass percentage of O is 60%" , Both are correct of the elements in sulfur trioxide ([tex]SO^3[/tex])
The molecular formula of sulfur trioxide ([tex]SO^3[/tex]) contains one sulfur atom and three oxygen atoms. To calculate the mass ratios and mass percentages of each element in [tex]SO^3\\[/tex], we need to know the atomic masses of sulfur and oxygen:
Sulfur (S): 32.06 g/mol
Oxygen (O): 16.00 g/mol
Mass ratio of S:
The mass ratio of sulfur (S) in [tex]SO^3\\[/tex] is the mass of sulfur divided by the total mass of the compound:
Mass ratio of S = mass of S / (mass of S + mass of O)
Mass ratio of S = [tex]32.06 g/mol / (32.06 g/mol + 3(16.00 g/mol))[/tex]
Mass ratio of S =[tex]32.06 g/mol / 80.06 g/mol[/tex]
Mass ratio of S = 0.400
Therefore, option 1 "The mass ratio of S is .400" is correct.
Mass percentage of O:
The mass percentage of oxygen (O) in [tex]SO^3[/tex] is the mass of oxygen divided by the total mass of the compound, multiplied by 100%:
Mass percentage of O = (mass of O / total mass) x 100%
Mass percentage of O = [tex](3(16.00 g/mol) / (32.06 g/mol + 3(16.00 g/mol))) * 100%[/tex]
Mass percentage of O = [tex]48.00 g/mol / 80.06 g/mol * 100%[/tex]
Mass percentage of O = 59.97%
Rounding to one significant figure, the mass percentage of O in [tex]SO^3\\[/tex] is 60%.
Therefore, option 2 "The mass percentage of O is 60%" is also correct.
For more such questions on sulfur trioxide , Visit:
https://brainly.com/question/30352862
#SPJ11
Why are diamonds unevenly distributed on Earth?
Responses
Diamonds are formed in the upper mantle. Only some places on Earth have an upper mantle.
Diamonds are extremely hard. They are formed in rock that is equally as hard and is found only in certain places on Earth because of this.
Diamonds are made from carbon atoms. Carbon is rarely found on Earth’s surface.
Diamonds are carried upward close to the surface through the action of volcanoes. They are found only in areas with current or past volcanic activity.
Only under certain circumstances involving geological processes, such as plate movements and volcanic activity, could diamonds actually originate. Diamonds can only be found in these unique locations.
Are diamonds distributed equally throughout the world?Nonetheless, because of the mantle's comparatively low carbon content, diamonds are extremely rare. Diamonds are also not found in equal amounts around the planet; rather, they are only discovered in significant quantities in very specific geologic settings.
How do diamonds reach the earth's surface?Carbon crystals that develop beneath the Earth's crust are what makeup diamonds. They are exposed to the atmosphere during volcanic eruptions of a unique magma known as kimberlite.
to know more about diamonds here:
brainly.com/question/29775108
#SPJ1
What is the Molarity of a 0.5 Liter solution that contains 3.84 moles of NaCI?
SHOW WORK
Answer:
The molarity of a 0.5 L solution that contains 3.84 moles of NaCl is 7.68 M.
Here’s the work: Molarity (M) = moles of solute / liters of solution Substituting the given values into the equation: Molarity (M) = 3.84 moles / 0.5 L = 7.68 M.
HELP ASAP PLSSS I don't get it
Answer:
I believe the answer is 120 degrees Celsius.
Explanation:
−15+135=120
What variables are plotted on the x and y axes of the graph
Answer:
The Axes. The independent variable belongs on the x-axis (horizontal line) of the graph and the dependent variable belongs on the y-axis (vertical line). The x and y axes cross at a point referred to as the origin, where the coordinates are (0,0).Pls help with common naming the benzene aromatic compounds
The name of the substituent is appended as a prefix to the name of the aromatic compound in the IUPAC nomenclature of substituted aromatic compounds. Nitrobenzene is the name given to a benzene ring linked to a one-nitro group.
A level chemistry: how do you name benzene compounds?Aromatic compounds, often known as arenes, are chemicals that include a benzene ring. Arenes can be given two names: Chlorobenzne, benzoic acid (or benzene-carboxylic acid), and 1,3-dimethylbenzene are examples of substituted benzene rings.
Aromatic rings (also known as aromatic compounds or arenes) are hydrocarbons that include benzene or another ring structure similar to benzene.
learn more about Aromatic compounds
https://brainly.com/question/29497803
#SPJ1