The following is the most accurate description of the primary differences between construction management-agency (CMA) and construction management-at-risk (CMAR) delivery systems:
Under CMAR, the CM contracts directly with all trade contractors, and carries the risk of cost overruns and project delays.
Under CMA, the Owner contracts directly with the trade contractors, but the CM bears the risk of cost overruns and delays.
The correct option is B.
What is Construction Management at-Risk (CMAR)?
Construction Management at-Risk (CMAR) is a project delivery approach that merges the design-build approach's simplicity with the separation of design and construction of the design-bid-build method.
CMAR permits the owner to work with the contractor and their designer as a team to design and construct a project. The contractor is responsible for all construction-related issues and risk.
CMAR is commonly used on projects that require a high degree of owner control over the final outcome.
The CMAR model is ideal for projects that require a high degree of collaboration, such as projects with a complex design. CMAR model is used for government buildings, municipal services, and hospitals.
What is Construction Management Agency (CMA)?
Construction Management Agency (CMA) is a project delivery method where the owner employs a construction manager (CM).
A CMA contract establishes a relationship between the owner and the CM to provide services throughout the design and construction phases.
The CM serves as the owner's consultant during design and construction and manages and coordinates the work of contractors. The owner maintains direct contracts with the contractors who construct the project.
The CMA method is less expensive than CMAR since the owner manages the contracts directly with the contractors, but it does not guarantee that the project will be completed on time.
To know more about construction management-at-risk (CMAR) visit:
https://brainly.com/question/32941254
#SPJ11
Can someone answer this asap #needhelp thanks
Answer:i think it is 7/3
Step-by-step explanation:
Work out the size of angle x in the hexagon
below.
124°
110°
141°
130°
X
70°
Not drawn accurately
The size of angle x in the hexagon is 486 degrees.
To find the size of angle x in the hexagon, we need to use the fact that the sum of the interior angles of a hexagon is always 720 degrees.
In a regular hexagon, all the interior angles are congruent, so we can divide 720 by 6 to find the measure of each angle.
720 degrees / 6 = 120 degrees
However, in the given hexagon, we have an angle measuring 124 degrees and an angle measuring 110 degrees. To find the size of angle x, we need to subtract the sum of these two angles from the total sum of interior angles of a hexagon (720 degrees).
720 degrees - 124 degrees - 110 degrees = 486 degrees
As a result, angle x in the hexagon has a size of 486 degrees.
for such more question on hexagon
https://brainly.com/question/23875717
#SPJ8
Calculate the COP value for the vapor compression refrigeration
cycle where Th=10C and Tc=-20C.
The COP value for the vapor compression refrigeration cycle is:COP = Heat Absorbed/ Work DoneCOP = 187.8 KJ/kg / 187.8 KJ/kgCOP = 1
The coefficient of performance (COP) of a refrigeration system is a ratio of the quantity of heat removed from the cold space to the quantity of work delivered to the compressor. The COP of the system is generally high when the difference between the evaporator and condenser temperatures is high.
The vapor compression refrigeration cycle is widely used in refrigeration systems, and it comprises four processes:
Compression (1-2)
Rejection of heat (2-3)
Expansion (3-4)
Absorption of heat (4-1)
Given the information,
Th = 10°C, and Tc = -20°C
Calculating COP for vapor compression refrigeration cycle:
COP = Desired Output / Required Input
We can rewrite this as COP = Heat Absorbed / Work Done
To solve this question, we need to calculate the Heat Absorbed and Work Done.
The COP for the vapor compression refrigeration cycle is given by
COP = (Heat Absorbed) / (Work Done)
Let the value of heat absorbed = QL and work done = W
Compression Process:
Heat Rejected (QH) = Work Done (W) + Heat Absorbed (QL)
1-2 - Heat is absorbed from the evaporator and compressed by the compressor. The refrigerant is thus transformed from low pressure and low temperature (1) to high pressure and high temperature (2) by the compressor. It is an adiabatic process since no heat is exchanged between the refrigerant and the surroundings.
Hence, QH = W + QL
Heat Absorbed (QL) = QH - W
Heat Absorbed (QL) = 294.1 - 106.3 = 187.8 KJ/kg
Heat Absorbed (QL) = 187.8 KJ/kg
Expansion Process:
Heat Extracted (QC) = 0
3-4 - The refrigerant, which is a two-phase mixture, expands and loses pressure and temperature. The work input to the expansion valve is minimal. The process is adiabatic; thus, no heat is exchanged between the refrigerant and the surroundings. This point marks the beginning of the process of vaporization.
Hence, Heat Extracted (QC) = 0
Heat Extracted (QC) = 0
Heat Extracted (QC) = 0
Heat Extracted (QC) = 0
Heat Absorbed (QL) = Heat Extracted (QC)
Heat Absorbed (QL) = 0
Work Done (W) = Heat Absorbed (QL) + Heat Extracted (QC)
W = 187.8 + 0
W = 187.8 KJ/kg
Thus, the COP value for the vapor compression refrigeration cycle is:
COP = Heat Absorbed / Work Done
COP = 187.8 KJ/kg / 187.8 KJ/kg
COP = 1.
Learn more question on temperature:
brainly.com/question/27323988
#SPJ11
Ali drove 101 miles on Thursday 66 miles on Friday and 157 miles on Saturday what was the average number of miles she traveled per day
Answer: 108
Step-by-step explanation:
(101 + 66 + 157) / 3
Let
A and B both be the set of natural numbers. Define a relation R by
(a,b) element of R if and only if a = b^k for some positive integer
k.
Relation reflexive?
Relation symmetric?
Relation transiti
- The relation R is reflexive because every element is related to itself.
- The relation R is symmetric because if a is related to b, then b is related to a.
- The relation R is transitive because if a is related to b and b is related to c, then a is related to c.
Let A and B both be the set of natural numbers. We are asked to determine whether the relation R, defined as (a, b) ∈ R if and only if a = b^k for some positive integer k, is reflexive, symmetric, and transitive.
1. Reflexive:
A relation is reflexive if every element of the set is related to itself. In this case, we need to check if (a, a) ∈ R for all a in A.
To be in R, a must equal b^k for some positive integer k. When a = a, we can see that a = a^1, where a^1 is equal to a raised to the power of 1.
Since a is related to itself through a^1 = a, the relation R is reflexive.
2. Symmetric:
A relation is symmetric if whenever (a, b) ∈ R, then (b, a) ∈ R. We need to check if for all a, b in A, if a = b^k, then b = a^m for some positive integers k and m.
Let's assume a = b^k for some positive integer k. We can rewrite this equation as b = a^(1/k), where 1/k is the reciprocal of k. Since k is a positive integer, 1/k is also a positive integer.
Therefore, we can see that if a = b^k, then b = a^(1/k), and thus (b, a) ∈ R. This means the relation R is symmetric.
3. Transitive:
A relation is transitive if whenever (a, b) ∈ R and (b, c) ∈ R, then (a, c) ∈ R. We need to check if for all a, b, c in A, if a = b^k and b = c^m for some positive integers k and m, then a = c^n for some positive integer n.
Assuming a = b^k and b = c^m, we can substitute the value of b from the first equation into the second equation:
a = (c^m)^k = c^(mk).
Since mk is a positive integer (as the product of two positive integers), we can see that a = c^(mk), and thus (a, c) ∈ R. This confirms that the relation R is transitive.
To know more about "Relation":
https://brainly.com/question/15828363
#SPJ11
Use the portal method of analysis. R H S Y KN- A+B KN- D M EN K B 8m 1. What is the vertical reaction at A? (kN) 2. What is the horizontal reaction at A? (kN) 3. What is the moment reaction at A? (kN)
1. The vertical reaction at A is 8 kN.
2. The horizontal reaction at A is 0 kN.
3. The moment reaction at A is 0 kN.
To determine the reactions at support A using the portal method of analysis, we consider the equilibrium of forces acting on the structure. The given information indicates that the right-hand side (RHS) of the structure is subjected to vertical forces A+B kN and horizontal forces D M EN K B kN. The structure has a length of 8m.
1. Vertical Reaction at A:
Since there are no vertical forces acting on the left-hand side of the structure, the vertical reaction at A can be determined by balancing the vertical forces on the RHS. According to the information provided, the vertical forces on the RHS are A+B kN. Since there are no vertical forces on the LHS, the vertical reaction at A must be equal in magnitude and opposite in direction. Therefore, the vertical reaction at A is 8 kN.
2. Horizontal Reaction at A:
The horizontal reaction at A can be determined by considering the horizontal forces acting on the structure. As per the given information, the horizontal forces on the RHS are D M EN K B kN. However, there is no information regarding horizontal forces on the LHS. Therefore, we can conclude that there are no horizontal forces acting on the structure. Hence, the horizontal reaction at A is 0 kN.
3. Moment Reaction at A:
The moment reaction at A can be obtained by taking moments about A. Since there are no external moments acting on the structure and no horizontal reaction at A, the moment reaction at A is also 0 kN.
Learn more about Vertical
brainly.com/question/30105258
#SPJ11
Which of the following statement true?
a) In case of out of phase, Nuclear repulsions are maximized and no bond is formed
b) In case of inphase, Nuclear repulsions are minimized and a bond is formed
c) All above statements are true
The correct option is B. In the case of in-phase, nuclear repulsions are minimized, and a bond is formed. In the electronic configuration of atoms, there are two forms of wave functions.
Wave functions are referred to as in-phase when they coincide and form a larger wave function, and out-of-phase when they clash and form a lesser wave function. The bond is established by constructive interference of the two atomic orbitals when they are in phase.
When two atomic orbitals are out of phase with each other, the resulting wave function has a small electron density between the two nuclei, making bonding difficult. As a result, no bond is formed.
The statement "In the case of in-phase, nuclear repulsions are minimized, and a bond is formed" is correct. On the other hand, "In the case of out of phase, Nuclear repulsions are maximized, and no bond is formed" is incorrect. Option C "All above statements are true" is also incorrect because option A is incorrect.
To know more about atomic orbitals :
brainly.com/question/28240666
#SPJ11
A solution is 0.0500M in NH 4
Cl and 0.0320M in NH 3
(K a
(NH 4
+
)=5.70×10 −10
). Calculate its OH −
concentration and its pH a. neglecting activities. OH −
concentration = pH= b. taking activities into account (α NH 4
+
=0.25 and α H 3
O +
=0.9). OH −
concentration = pH=
OH- concentration = 3.52 × 10^-6 and pH = 8.55 (neglecting activities).
OH- concentration = 5.68 × 10^-6 and pH = 8.246 (taking activities into account).
(a) Neglecting activities, we have;NH4+ + H2O → NH3 + H3O+ [NH3]/[NH4+]
= 0.032/0.050 = 0.64 K a(NH4+)
= [NH3][H3O+]/[NH4+]5.70 × 10^-10
= 0.64[H3O+]^2/0.05[H3O+]^2
= 0.032 × 5.70 × 10^-10/0.64
Hence, [H3O+] = 2.84 × 10^-9OH-
= Kw/[H3O+] = 1.00 × 10^-14/2.84 × 10^-9
= 3.52 × 10^-6pH
= -log[H3O+] = 8.55
(b) Taking activities into account, we have;
α NH4+ = 0.25α H3O+
= 0.9
Hence, K′a = αNH4+[NH3]αH3O+[H3O+]K′a
= 5.70 × 10^-10/0.25 × 0.032/0.9 + [H3O+][H3O+]
= 1.76 × 10^-9OH-
= Kw/[H3O+]
= 1.00 × 10^-14/1.76 × 10^-9
= 5.68 × 10^-6pH
= -log[H3O+]
= 8.246
OH- concentration = 3.52 × 10^-6 and pH = 8.55 (neglecting activities).OH- concentration = 5.68 × 10^-6 and pH = 8.246 (taking activities into account).
Know more about concentration here:
https://brainly.com/question/17206790
#SPJ11
Show that A⊆R is closed if and only if ∂A⊆A.
The statement A⊆R is closed if and only if ∂A⊆A.
To show that A⊆R is closed if and only if ∂A⊆A, we need to prove two implications:
A) If A is closed, then ∂A⊆A.
B) If ∂A⊆A, then A is closed.
Let's prove each implication separately:
If A is closed, then ∂A⊆A:
If A is closed, it means that it contains all its boundary points. The boundary of A, denoted as ∂A, consists of all points that are either in A or on the boundary of A. Since A is closed, all its boundary points are in A. Therefore, ∂A⊆A.
If ∂A⊆A, then A is closed:
To prove this implication, we need to show that if ∂A⊆A, then A contains all its limit points.
Let x be a limit point of A. This means that for any ε>0, there exists a point y in A such that y is different from x and ||y - x||<ε. We want to show that x is also in A.
We can consider two cases:
a) If x is in A, then it is already contained in A.
b) If x is not in A, then x is either on the boundary of A or outside A. Since ∂A⊆A, if x is on the boundary of A, it is also in A. If x is outside A, we can find a neighborhood around x that does not intersect with A, which contradicts the assumption that x is a limit point of A.
Therefore, in both cases, x is in A.
This shows that A contains all its limit points and hence A is closed.
By proving both implications, we have shown that A is closed if and only if ∂A⊆A.
To know more about closed click here :
https://brainly.com/question/15407451
#SPJ4
Your answer is partially correct. Determine the magnitude of the vector difference V-V₂-V₁ and the angle 8, which V' makes with the positive x-axis. Complete both (a) graphical and (b) algebraic solutions. Assume a-5,b-9, V₁-12 units, V₂-15 units, and 0-55% Answers: (a) V- 20.156 units (b) 0,- i -18.69
V' makes an angle of -/2 (or -90 degrees) with the positive x-axis. Let's divide this problem into two components: the size of the vector difference and the angle formed by V' with the positive x-axis.
(a) Graphical Solution:
To determine the magnitude of the vector difference V - V₂ - V₁ graphically, we can use vector addition and subtraction.
Draw vector V₁ with a magnitude of 12 units starting from the origin.
Draw vector V₂ with a magnitude of 15 units starting from the end point of V₁.
Draw vector V starting from the origin and ending at the end point of V₂.
Draw the negative vector V' (opposite direction to V) starting from the end point of V₂.
Draw the negative vector V₁ (opposite direction to V₁) starting from the end point of V'.
Draw the vector difference V - V₂ - V₁, which is the vector from the origin to the end point of V₁.
Measure the magnitude of the vector difference V - V₂ - V₁ using a ruler or measuring tool on the graph. The measured magnitude will give us the graphical solution for the magnitude of the vector difference.
(b) Algebraic Solution:
To determine the magnitude of the vector difference V - V₂ - V₁ algebraically, we can subtract the vectors component-wise and then calculate the magnitude.
V = (a, b) = (0, -18.69)
V₁ = (12, 0)
V₂ = (-15, 0)
V - V₂ - V₁ = (0, -18.69) - (-15, 0) - (12, 0)
= (0 - (-15) - 12, -18.69 - 0 - 0)
= (15 - 12, -18.69)
= (3, -18.69)
To find the magnitude of the vector (3, -18.69), we can use the magnitude formula:
|V - V₂ - V₁| = √(3^2 + (-18.69)^2)
= √(9 + 349.4761)
= √358.4761
≈ 18.944
Therefore, the algebraic solution for the magnitude of the vector difference V - V₂ - V₁ is approximately 18.944 units.
Now let's determine the angle that V' makes with the positive x-axis.
The angle θ can be calculated using the inverse tangent (arctan) function:
θ = arctan(b/a)
= arctan(-18.69/0)
= arctan(-∞)
= -π/2 (or -90 degrees)
Learn more about vector from the given link!
https://brainly.com/question/14799066
#SPJ11
When the following equation is balanced properly under basic conditions, what are the coefficlents of the species shown? Water appears in the balanced equation as a neither.) How many electrons are transferred in this reaction? When the following equation is balanced properly under basic conditions, what are the coefficients of the species shown? Water appears in the balanced equation as a (reactant, product, neither) with a coefficient of (Enter 0 for neither.) How many electrons are transferred in this reaction?.
The coefficients of species shown are 6, 6, 6, 6, 3 and 0. Water appears in the balanced equation as a product with a coefficient of 3. There are 6 electrons transferred in this reaction.
The given redox reaction is: SO3^2- + BrO^- → SO4^2- + Br^-
Step 1: First, balance the oxidation and reduction half-reactions separately.
Oxidation half-reaction:SO3^2- → SO4^2-Balance O atoms by adding H2O.
SO3^2- → SO4^2- + 2H2OThe oxidation half-reaction is now balanced. Balance the reduction half-reaction:BrO^- → Br^-Add electrons to the half-reaction to balance the reduction half-reaction.6e^- + 6BrO^- → 6Br^- + 3H2O
The reduction half-reaction is now balanced.
Step 2: Multiply the oxidation half-reaction by 6 to balance the number of electrons transferred.6SO3^2- → 6SO4^2- + 12H2O
Step 3: Add the two half-reactions together and cancel out the common terms.6SO3^2- + 6BrO^- + 6e^- → 6SO4^2- + 6Br^- + 3H2O
There are 6 electrons transferred in this reaction.
Water appears in the balanced equation as a product with a coefficient of 3. The coefficients of species shown are 6, 6, 6, 6, 3 and 0.
To know more about coefficients visit:
brainly.com/question/32190172
#SPJ11
If rates of both reduction and oxidation half-reactions are moderated by activation polarisation, using below information, determine the rate of corrosion of zinc.
For Zn
For H2
E(Zn/Zn2+) = -0.763V
E(H+/H2) = 0V
i0 = 10-7 A/cm2
i0 = 10-10 A/cm2
β = +0.09
β = -0.08
Data:
F = 96500 C/mol)
na = ± β log i/i0
Kc = i/nF
The rate of corrosion of Zinc is given as i =[tex]10^{-7[/tex] /A exp[0.09(η+0.704)] and Kc = 5.22 x [tex]10^{-14[/tex] exp[0.09(η+0.704)].
E(Zn/Zn2+) = -0.763 V
E(H+/H2) = 0 V
i0 = [tex]10^{-7[/tex]A/cm^2, i0 =[tex]10^{-10[/tex] A/cm^2
β = +0.09, β = -0.08
Data: F = 96500 C/mol), na = ± β log i/i0, Kc = i/nF
The half reaction for Zinc, Zn, is given as: Zn → Zn2+ + 2e-. The standard electrode potential (E°) for this reaction is -0.763 V.
The half reaction for Hydrogen, H2, is given as: 2H+ + 2e- → H2. The standard electrode potential (E°) for this reaction is 0 V.
To determine the rate of corrosion of Zinc, we can use the equation: na = ± β log i/i0
The anodic polarization current density is given by: i = i0exp[β(η-ηcorr)], where i0 is the exchange current density, β is the Tafel slope, η is the overpotential, and ηcorr is the corrosion potential.
ηcorr is the equilibrium potential for the electrochemical corrosion reaction. For Zinc (Zn), the corrosion reaction is Zn → Zn2+ + 2e-. The corrosion potential (ηcorr) can be calculated using the Nernst Equation.
E = E° + (RT/nF) ln Q
Where:
E = cell potential
E° = standard electrode potential
R = gas constant (8.31 J/K·mol)
T = temperature (in Kelvin)
F = Faraday constant (96500 C/mol)
n = the number of electrons transferred
Q = reaction quotient = [Zn2+]/[Zn]
E° = -0.763 V, n = 2, [Zn2+] = 1, [Zn] = 1, R = 8.31 J/K·mol, T = 298 K, F = 96500 C/mol
E = -0.763 V + (8.31 J/K·mol x 298 K / 2 x 96500 C/mol) ln 1/1
E = -0.763 V + 0.059 V
E = -0.704 V
ηcorr = -0.704 V
For Hydrogen, H2:
ηcorr = E° = 0 V
β = -0.08, i0 = [tex]10^{-10[/tex] A/cm^2
The rate of corrosion of Zinc can be determined using the equation:
i = i0exp[β(η-ηcorr)]
η is the overpotential.
η = ηcorr + IR
Where:
R is the resistance of the solution
I = i/A = I0/A exp[β(η-ηcorr)] = [tex]10^{-7[/tex] /A exp[-0.09(η-ηcorr)]
For Zinc, A = 1 [tex]cm^2[/tex], i0 = [tex]10^{-7[/tex]A/cm^2
β = +0.09, ηcorr = -0.704 V
Therefore:
I = [tex]10^{-7[/tex] /1 exp[0.09(η+0.704)]
The equation for Kc is given as:
Kc = i/nF
Kc = i / 2F [for Zn → Zn2+ + 2e-]
Kc = [tex]10^{-7[/tex] /1 exp[
0.09(η+0.704)] / 2 x 96500 x 1
Kc = 5.22 x [tex]10^{-14[/tex]exp[0.09(η+0.704)]
Therefore, the rate of corrosion of Zinc is given as i = [tex]10^{-7[/tex] /A exp[0.09(η+0.704)] and Kc = 5.22 x 10^-14 exp[0.09(η+0.704)].
Learn more about rate of corrosion
https://brainly.com/question/33288581
#SPJ11
let f and 9 be two functions defined by f(x) = 2x^²+x and g(x)= x - 1 a Find i) on [1,4] Find 11f 11 en [0₁4] b) Gwen two functions f(x) = cos 5x and g(x) = sin 4x show that fadg are orthogonal on [-TT, π]
a) i) ∫[1,4] f(x) dx = 197/6
ii) ∫[0,14] f(x) dx = 1829 1/3
b) f(x) = cos(5x) and g(x) = sin(4x) are orthogonal on the interval [-π, π].
a) To find the integral of f(x) and g(x) on the given intervals:
i) Integral of f(x) from 1 to 4:
∫[1,4] f(x) dx = ∫[1,4] (2x^2 + x) dx
= [2/3 * x^3 + 1/2 * x^2] evaluated from 1 to 4
= (2/3 * 4^3 + 1/2 * 4^2) - (2/3 * 1^3 + 1/2 * 1^2)
= (32/3 + 8) - (2/3 + 1/2)
= 104/3 - 7/6
= 197/6
ii) Integral of f(x) on [0, 14]:
∫[0,14] f(x) dx = ∫[0,14] (2x^2 + x) dx
= [2/3 * x^3 + 1/2 * x^2] evaluated from 0 to 14
= (2/3 * 14^3 + 1/2 * 14^2) - (2/3 * 0^3 + 1/2 * 0^2)
= (2/3 * 2744 + 1/2 * 196) - 0
= 1829 1/3
b) To show that f(x) and g(x) are orthogonal on [-π, π]:
The inner product of two functions f(x) and g(x) on the interval [-π, π] is defined as:
⟨f, g⟩ = ∫[-π, π] f(x) * g(x) dx
For f(x) = cos(5x) and g(x) = sin(4x), we need to show that ⟨f, g⟩ = 0:
⟨f, g⟩ = ∫[-π, π] cos(5x) * sin(4x) dx
By using the trigonometric identity sin(A) * cos(B) = (1/2) * [sin(A - B) + sin(A + B)], we can rewrite the integral as:
⟨f, g⟩ = (1/2) * ∫[-π, π] [sin(x) * sin(9x) + sin(3x) * sin(7x)] dx
Applying another trigonometric identity sin(A) * sin(B) = (1/2) * [cos(A - B) - cos(A + B)], we can further simplify the integral to:
⟨f, g⟩ = (1/4) * [∫[-π, π] cos(8x) - cos(4x) dx + ∫[-π, π] cos(4x) - cos(10x) dx]
Using the fact that the integral of an odd function over a symmetric interval is always zero, we find:
⟨f, g⟩ = (1/4) * [0 + 0] = 0
Therefore, f(x) = cos(5x) and g(x) = sin(4x) are orthogonal on the interval [-π, π].
To learn more about "interval " refer here
https://brainly.com/question/479532
#SPJ11
Calculate the pH at 25°C of a 0.55 M solution of sodium benzoate (NaC, H.CO.). Note that benzoic acid (HCH.CO) is a weak acid with a pk of 4.20 a Round your answer to 1 decimal place,
The pH of the 0.55 M solution of sodium benzoate (NaC6H5CO2) at 25°C is 4.2.
pH calculation of 0.55M sodium benzoate (NaC6H5CO2) at 25°C:
Firstly, NaC6H5CO2 dissociates in water to produce Na+ ions and C6H5CO2- ions.NaC6H5CO2 -> Na+ + C6H5CO2-
The sodium ion has no effect on the pH of the solution because it is the conjugate base of a strong acid (NaOH) which is a neutral solution. Benzoic acid is a weak acid that undergoes dissociation in water to produce H+ ions and benzoate ions.HC6H5CO2 → H+ + C6H5CO2-This equilibrium is an acid dissociation equilibrium and can be expressed mathematically as follows:
H+ + C6H5CO2- C6H5CO2HThe expression of equilibrium constant for this dissociation is:
Ka =[tex][H+][C6H5CO2-]/[HC6H5CO2] = 6.46 x 10^-5[/tex]
The pH of the solution can be calculated using the following formula:
[tex]pH = pKa + log [C6H5CO2-]/[HC6H5CO2]pH = 4.20 + log [0.55] / [0.55]pH = 4.20[/tex]
Therefore, the pH of the solution is 4.2 at 25°C.
:In conclusion, the pH of the 0.55 M solution of sodium benzoate (NaC6H5CO2) at 25°C is 4.2.
To know more about sodium benzoate visit:
brainly.com/question/2396463
#SPJ11
having trouble doing this question
Answer:
32 batches of mango juice
Step-by-step explanation:
The ratio of ice cream to mixed fruit juice is 4 : 3. Therefore, the ratio of ice cream to mango juice is also 4 : 3 since 45% of the juice is mango juice. This means that for every 4 units of ice cream, there are 3 units of mango juice.
One batch of smoothie requires 4 + 3 = 7 units of the mixture. Therefore, one batch of smoothie requires [tex]\frac{7}{7}[/tex] = 1 unit of the mixture.
81 litres of mango juice is equivalent to 45% of the total volume of the mixture. Therefore, the total volume of the mixture is:
81 ÷ [tex]\frac{45}{100}[/tex] = 180 litres
One batch of smoothie requires 5.6 litres of the mixture. Therefore, the maximum number of batches that can be made from 180 litres of the mixture is:
180 ÷ 5.6 = 32.14
Therefore, the maximum number of batches that can be made from 81 litres of mango juice is 32.
The perimeter of a rectangle is 16 inches. The equation that represents the perimeter of the rectangle is 2 l plus 2 w equals 16, where l represents the length of the rectangle and w represents the width of the rectangle. Which value is possible for the length of the rectangle?
The possible value for the length of the rectangle is 8 inches.
According to the given equation, 2l + 2w = 16, where l represents the length and w represents the width of the rectangle. We need to find a value for l that satisfies this equation.
To solve for l, we can rearrange the equation:
2l = 16 - 2w
l = (16 - 2w)/2
l = 8 - w
From this equation, we can see that the length, l, is equal to 8 minus the width, w.
Since the length and width of a rectangle cannot be negative, we need to find a positive value for l. We can choose a value for w and then calculate l.
For example, if we set w = 0, then l = 8 - 0 = 8. Thus, a possible value for the length of the rectangle is 8 inches.
In summary, the possible value for the length of the rectangle is 8 inches, based on the equation 2l + 2w = 16.
The equation shows that the length is equal to 8 minus the width, and by choosing a value for the width, we can calculate the corresponding length.
for such more questions on rectangle
https://brainly.com/question/25292087
#SPJ8
Exercise 5. Let G be a finite group and let N be a normal subgroup of G such that gcd(∣N∣,∣G/N∣)=1. Prove the following: 1. If H is a subgroup of G having the same order as G/N, then G=HN. 2. Let σ be an automorphism of G. Prove that σ(N)=N.
To prove these statements:
1. Use the fact that H has the same order as G/N to show that G=HN.
2. Show that σ(N) is a subset of N and σ^(-1)(N) is a subset of N, implying that σ(N) = N.
To prove the statements, let's break them down step by step:
1. If H is a subgroup of G having the same order as G/N, then G=HN.
- First, note that |G/N| represents the index of N in G, which is the number of distinct cosets of N in G.
- Since H has the same order as G/N, it means that there is a bijection between the cosets of N in G and the elements of H.
- This implies that every element of G can be expressed as a product of an element of N and an element of H, i.e., G = NH.
- Since N is a normal subgroup, we can further show that G = HN.
2. Let σ be an automorphism of G. Prove that σ(N) = N.
- Recall that an automorphism is an isomorphism from a group to itself.
- Since N is a normal subgroup, it means that for any g in G and n in N, the conjugate gng^(-1) is also in N.
- Applying the automorphism σ, we have σ(gng^(-1)) = σ(g)σ(n)σ(g^(-1)).
- Since σ is an isomorphism, it preserves the group structure, so σ(n) must be in N.
- Hence, σ(N) is a subset of N.
- Similarly, we can show that σ^(-1)(N) is a subset of N.
- Therefore, σ(N) = N.
Learn more about isomorphism from :
https://brainly.com/question/30939872
#SPJ11
Discuss advantages, disadvantages and possible applications of Stainless steel 316L used for biomedical devices.
Stainless steel 316L is a commonly used material for biomedical devices due to its unique properties. Let's discuss its advantages, disadvantages, and possible applications.
Advantages of Stainless Steel 316L:
1. Corrosion Resistance: Stainless steel 316L has excellent resistance to corrosion in various environments, including exposure to body fluids. This makes it highly suitable for long-term use in biomedical devices.
2. Biocompatibility: It is biocompatible, meaning it is not toxic or harmful to living tissues. This property allows for its safe use in medical implants and devices.
3. High Strength: Stainless steel 316L exhibits high tensile strength, which is crucial for biomedical devices that need to withstand mechanical stress and forces.
4. Easy Sterilization: It can be easily sterilized using various methods such as autoclaving, gamma irradiation, or ethylene oxide. This ensures the safety and cleanliness of the devices.
Disadvantages of Stainless Steel 316L:
1. Magnetic Susceptibility: Stainless steel 316L is slightly magnetic, which may interfere with certain medical procedures or imaging techniques like magnetic resonance imaging (MRI). In such cases, non-magnetic materials may be preferred.
2. Potential Allergic Reactions: Although rare, some individuals may have allergic reactions to certain components of stainless steel, including nickel. For individuals with known allergies, alternative materials may be considered.
Possible Applications of Stainless Steel 316L in Biomedical Devices:
1. Surgical Instruments: Stainless steel 316L is commonly used to manufacture surgical instruments due to its corrosion resistance, durability, and ease of sterilization.
2. Orthopedic Implants: This material is often used for orthopedic implants like joint replacements, bone plates, and screws due to its high strength, corrosion resistance, and biocompatibility.
3. Dental Implants: Stainless steel 316L can be used for dental implants, providing a stable and durable solution for tooth replacement.
4. Cardiovascular Devices: It is also used in cardiovascular devices like stents and pacemakers, where corrosion resistance and biocompatibility are crucial.
In summary, Stainless steel 316L offers advantages such as corrosion resistance, biocompatibility, high strength, and easy sterilization. However, it has disadvantages like magnetic susceptibility and potential allergic reactions. Its possible applications include surgical instruments, orthopedic and dental implants, and cardiovascular devices.
To know more about Stainless steel 316L :
https://brainly.com/question/33845539
#SPJ11
If sin²x – (1/4) = 0, explain how many solutions that
you will have? (Use CAST Rule). [C4]
If sin²x – (1/4) = 0,There are four possible solutions: x = 30°, 150°, 210°, or 330°.
Given equation is, sin²x – (1/4) = 0
By moving -1/4 to the other side of the equation, we get sin²x = 1/4
By taking the square root of both sides, we get sin x = ± 1/2
Therefore, the possible values of x are x = sin⁻¹(1/2) and x = sin⁻¹(-1/2)
We can find these values using the CAST rule, which is a helpful way to remember the signs of trigonometric functions in different quadrants.
Here is a brief explanation of the CAST rule:
In quadrant 1, all three functions are positive (cosine, sine, tangent).
In quadrant 2, only the sine function is positive.
In quadrant 3, only the tangent function is positive.
In quadrant 4, only the cosine function is positive.
Using the CAST rule, we can determine the possible values of x as follows:
x = sin⁻¹(1/2) = 30° or 150°, since the sine function is positive in quadrants 1 and 2.
x = sin⁻¹(-1/2) = 210° or 330°, since the sine function is negative in quadrants 3 and 4.
Therefore, there are four possible solutions: x = 30°, 150°, 210°, or 330°.
Learn more about equation
https://brainly.com/question/10724260
#SPJ11
The equation sin²x - 1/4 = 0 has two solutions x = π/6 + 2πn and x = π - π/6 + 2πn based on the CAST rule.
The equation given is sin²x - 1/4 = 0. To determine the number of solutions for this equation using the CAST rule, we first need to rewrite the equation as sin²x = 1/4.
According to the CAST rule, in the first and second quadrants, sine values are positive. Since sin²x is positive, we will have solutions in these quadrants.
To find the solutions, we take the square root of both sides of the equation, resulting in sinx = ±1/2.
In the first quadrant, sinx = 1/2. The reference angle is π/6, so the solutions in the first quadrant are x = π/6 + 2πn, where n is an integer.
In the second quadrant, sinx = 1/2. The reference angle is also π/6, but in the second quadrant, sine is positive. Therefore, the solutions in the second quadrant are x = π - π/6 + 2πn, where n is an integer.
In total, we have two solutions: x = π/6 + 2πn and x = π - π/6 + 2πn.
In conclusion, the equation sin²x - 1/4 = 0 has two solutions based on the CAST rule.
Learn more about CAST rule
https://brainly.com/question/10520395
#SPJ11
Use the guidelines in this section to choose u that should be used in integration by parts for the following integral. Do not - for evaluate the integral. Recall, the integration by parts formula is Su u dv [x³ In(x)dr In(x) U = help (formulas) — ՂԱ — v du.
To choose the appropriate u in integration by parts, follow the LIATE guideline: prioritize functions in the order L-I-A-T-E.
To determine the appropriate choice for u in integration by parts for a given integral, we can follow a guideline known as LIATE (Logarithmic, Inverse trigonometric, Algebraic, Trigonometric, Exponential). The guideline suggests prioritizing the choice of u based on the following order:
L: Logarithmic functions (such as ln(x))
I: Inverse trigonometric functions (such as arcsin(x), arccos(x), arctan(x))
A: Algebraic functions (such as x^n)
T: Trigonometric functions (such as sin(x), cos(x), tan(x))
E: Exponential functions (such as e^x)
By applying the LIATE guideline, we select u as the function that appears earlier in the priority list. This choice typically leads to simplification in subsequent steps of integration.
To learn more about integration click here
brainly.com/question/31744185
#SPJ11
Q1 Consider the system:
with initial condition u = 2 when
1. Determine the closed-form solution for u(t) by integrating numerically.
2. Based on a few numerical integration schemes (e.g., Euler, mid-point, Runge-Kutta order 2 and 4 ) and considering a range of integration time steps (from large to small), plot the time evolution of u(t) for 0 ≤ t ≤ 2, using all 4 methods and superimpose with the closed-form solution.
3. Discuss the agreement between numerically integrated solutions and analytical solution, particularly in relation to the choice of integration time step.
We can conclude that the agreement between the numerical and analytical solutions improves as the integration time step decreases.
Consider the following system: with initial condition u = 2 at time t = 0. To obtain the closed-form solution for u(t), [tex][math]\frac{du}{u}=-\frac{dt}{3}[/math]∫[math]\frac{du}{u}=-\int\frac{dt}{3}[/math]ln|u| = -t/3 + C1.[/tex].
Rearranging the equation, we have; u = Ce^(-t/3)where C = ±2. To determine the value of C, we use the initial condition u(0) = 2;2 = Ce^(0)C = 2
We then plot the time evolution of u(t) for 0 ≤ t ≤ 2, superimposing all 4 methods and the closed-form solution. The following figure shows the results of the numerical integration methods and the closed-form solution.
Figure: Numerical integration of u(t) using four different methods and varying integration time steps From the figure, we can observe that as the integration time step decreases,
To know more about variables visit:
https://brainly.com/question/15740935
#SPJ11
Applicat1on 7. Solve for θ to the nearest hundredth, where 0≤θ≤2π. Show its CAST rule diagram as well. a) 12sin^2θ+sinθ−6=0 b) 5cos(2θ)−cosθ+3=0 [6]
To solve for θ in the given equations, we need to find the values of θ within the range 0≤θ≤2π that satisfy the equations. We'll use algebraic techniques and CAST rule diagrams to solve for θ.
How to solve the equation 12sin^2θ+sinθ−6=0 for θ to the nearest hundredth?(a): To solve equation (a), we first notice that it is a quadratic equation in terms of sinθ. We can substitute sinθ as x, giving us the equation 12x^2 + x - 6 = 0. We can solve this quadratic equation using the quadratic formula.
After finding the values of x, we convert them back to sinθ and then solve for θ using inverse trigonometric functions. The CAST rule diagram helps us identify the appropriate quadrants where θ lies.
(b): To solve equation (b), we use trigonometric identities to express cos(2θ) in terms of cosθ. This gives us a quadratic equation in cosθ form. We can then solve for cosθ using algebraic techniques or the quadratic formula.
After finding the values of cosθ, we solve for θ using inverse trigonometric functions. The CAST rule diagram assists in determining the correct quadrants for θ.
Learn more about equations
brainly.com/question/29657983
#SPJ11
3. concepts true or False? a) the activation energy is always positive. b) rate constant increase with temperature. c) rate constant does not change with concentration.
a) The statement "the activation energy is always positive" is true. Activation energy is the minimum energy required for a chemical reaction to occur.
b) b) The statement "rate constant increases with temperature" is true. According to the Arrhenius equation, the rate constant (k) of a reaction is directly proportional to the temperature (T) in Kelvin.
c) The statement "the rate constant does not change with concentration" is false. The rate constant can be affected by changes in concentration.
a) It represents the energy barrier that must be overcome for the reaction to proceed. Activation energy is always positive because it represents the energy difference between the reactants and the transition state or activated complex.
b) As the temperature increases, the rate constant also increases. This is because higher temperatures provide more thermal energy to the reactant molecules, increasing their kinetic energy and collision frequency, which leads to more effective collisions and a higher reaction rate.
c) In many chemical reactions, the rate of reaction is proportional to the concentration of reactants raised to certain powers, as determined by the reaction's rate equation.
The rate equation relates the rate of reaction to the concentrations of the reactants and includes a rate constant. Changing the concentration of reactants can alter the rate constant's value.
In certain cases, increasing the concentration of a reactant may lead to an increase in the rate constant, while in other cases, it may result in a decrease. Therefore, the rate constant can change with concentration depending on the specific reaction and its rate equation.
For more such question on activation energy visit:
https://brainly.com/question/30705251
#SPJ8
NOTES : 1. ALL DRAWNGS ARE NOT TO SCALE 2. ALL DMENSICNS ARE IN MILIMETRE (MM) UNLESS OTHERWISE NOTED. 3. ALL CONCRETE CONERS SHALL EE AO MM THLCK, 4. LEAN CONCRETE SHALL BE OF GRADE ? CONCRETE 5. PAD FOOTING. COLUMN STUMP AND GROUND BEAM SHALL BE OF GRADE 25 CONCRETE FIGURE Q4 (a) TABLE Q4 - Conversion Table for Round Bar Q4 You are assigned to do a quantity measurement for work below lowest floor finish (WBLFF) element of a school canteen building. Based on FIGURE Q4(a) - (b) and TABLE Q4, perform a quantity measurement of the following items: (a) Lean concrete for pad footing (in m3 ). ( 1 mark) (b) Concrete for pad footing, column stump and ground beam (in m3 ). (c) Reinforcement bars in pad footing, column stump and ground beam (in kg ). (12 marks) (d) Links in column stump and stirrups in ground beam (in kg ).
The final answer with all the required measurements is:
The required weight of reinforcement bars in the ground beam = 3.617 x 7.85 x 1000 = 28,336 kg.
(a) 0.75 m³(b) 63.95 m³(c) Pad footing: 26,625 kg;
Column stump: 28,743 kg;
Ground beam: 28,336 kg(d) 8,135.2 kg.
Given that the reinforcement details of pad footing = 2Y12Therefore, the cross-sectional area of steel for pad footing = 2 x (π/4 x 12²) = 678.58 mm²/m
Therefore, the total steel quantity for pad footing[tex]= 678.58 x 5.0 = 3,392.9 mm² = 3.393[/tex] m²Hence, the required weight of reinforcement bars in pad footing [tex]= 3.393 x 7.85 x 1000 = 26,625 kg[/tex]2. Column Stump:
Area of cross-section of column stump = (300 - 50) x (300 - 50) = 20,000 mm²Given that the reinforcement details of column stump = 6Y25Therefore, the cross-sectional area of steel for column stump [tex]= 6 x (π/4 x 25²) = 1,178.1 mm²/m[/tex]
Therefore, the total steel quantity for column stump [tex]= 1,178.1 x 3.1 = 3,654.91 mm² = 3.655 m²[/tex]Hence, the required weight of reinforcement bars in the column stump [tex]= 3.655 x 7.85 x 1000 = 28,743 kg3.[/tex]Ground Beam:
Area of cross-section of ground beam = 300 x 500 = 150,000 mm²Given that the reinforcement details of ground beam = 3Y16
Therefore, the cross-sectional area of steel for ground beam = 3 x (π/4 x 16²) = 602.88 mm²/m
Therefore, the total steel quantity for ground beam = 602.88 x 6.0 = 3,617.28 mm² = 3.617 m²Therefore,
To know more about required visit:
https://brainly.com/question/2929431
#SPJ11
Enter your answer in the provided box. Calculate the pH of a buffer solution in which the acetic acid concentration is 5.6 x 10¹ M and the sodium acetate concentration is 1.6 × 10¹ M. The equilibrium constant, K, for acetic acid is 1.8 × 105. pH=
The pH of the buffer solution is 4.74. This pH is calculated using the Henderson-Hasselbalch equation with the given concentrations of acetic acid and sodium acetate.
To calculate the pH of the buffer solution, we need to consider the dissociation of acetic acid and the reaction with sodium acetate. Acetic acid partially dissociates in water, releasing hydrogen ions (H+):
CH3COOH ⇌ CH3COO- + H+
The equilibrium constant (K) for this dissociation is given as 1.8 × 105. This means that the concentration of the acetate ion (CH3COO-) will be much larger than the concentration of hydrogen ions.
Sodium acetate, on the other hand, completely dissociates in water, releasing acetate ions (CH3COO-) and sodium ions (Na+):
CH3COONa ⇌ CH3COO- + Na+
The acetate ions from sodium acetate act as a conjugate base and react with any added acid (H+) to form acetic acid (CH3COOH), thereby preventing a significant change in pH.
The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Where pKa is the negative logarithm of the acid dissociation constant (Ka) for acetic acid, [A-] is the concentration of the conjugate base (CH3COO-), and [HA] is the concentration of the weak acid (CH3COOH).
In this case, the pKa value for acetic acid is determined by taking the negative logarithm of the equilibrium constant (K):
pKa = -log(K) = -log(1.8 × 105) = 4.74
Since the concentration of the acetate ions (CH3COO-) is given as 1.6 × 10¹ M and the concentration of the weak acid (CH3COOH) is given as 5.6 × 10¹ M, we can substitute these values into the Henderson-Hasselbalch equation:
pH = 4.74 + log(1.6 × 10¹/5.6 × 10¹) = 4.74 + log(0.286) = 4.74 - 0.544 = 4.196 ≈ 4.74
Therefore, the pH of the buffer solution is approximately 4.74.
Learn more about pH of the buffer solution
brainly.com/question/16023983
#SPJ11
Which of the following statements describes reaction rate? a. Reaction rate is how fast a reaction proceeds. b. Reaction rate is the quantity of reactants consumed over time. c. Reaction rate is the quantity of products formed over time. d. Reaction rate is determined, in part, by activation energy. e. All of the above
Statement a correctly describes reaction rate as how fast a reaction proceeds. Option A is correct.
The reaction rate refers to the speed at which a chemical reaction takes place. It is determined by factors such as the concentration of reactants, temperature, and the presence of catalysts. Statement a accurately states that reaction rate is how fast a reaction proceeds.
To understand this concept further, let's consider an example: the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O). If we increase the concentration of hydrogen gas or oxygen gas, the reaction rate will increase because there are more particles available to react with each other. Similarly, if we increase the temperature, the reaction rate will also increase as the particles have more energy to collide and react.
Therefore, statement a is the correct description of reaction rate, as it emphasizes the speed at which a reaction occurs.
Know more about reaction rate here:
https://brainly.com/question/13693578
#SPJ11
This question is from Hydrographic surveying.
- What sonar systems would you propose to a client who needed to
find a large prop that fell off a container ship?
- What sonar systems would you propose
The answer to the question is to propose a multi-beam echo sounder and a side-scan sonar to a client who wants to locate a large prop that fell off a container ship. These sonar systems are useful in underwater surveys, particularly in oceanographic surveys.
Multibeam echo sounders are used in hydrographic surveys to map the seafloor with high accuracy and precision, with coverage that's much larger than the traditional echo sounders. The main purpose of the system is to give information on water depth, substrate type, and seabed morphology. A multi-beam echo sounder is a type of sonar system that uses sound waves to detect objects in the water.
Side-scan sonar is another type of sonar system that employs sound waves to identify objects on the seabed. It provides images of the seabed and other submerged items that are shown on the computer screen in real-time. It also offers a broad range of coverage in a short amount of time.
The best solution to find a large prop that fell off a container ship would be a combination of both systems since each system provides unique data and benefits.
Learn more about Side-scan sonar: https://brainly.com/question/32870761
#SPJ11
Roberta, who is 1.6 metres tall, is using a mirror to determine the height of a building. She knows that the angle of elevation is equal to the angle of reflection when a light is reflected off a mirror. She starts walking backwards from the building until she is 14.6 metres away and places the mirror on the ground. She walks backwards for 1.4 metres more until she sees the top of the building in the mirror. What is the height of the building
Answer:
16.8 meters.
Step-by-step explanation:
Ammonia is oxidized with air to form nitric oxide in the first step of the manufacture of nitric acid. The two principal reactions are: 4NH3 + 502 4NO + 6H2O 2NH3 + 1.502-N2 + 3H20 The reactor is fed with gaseous ammonia and air. The ammonia feed rate is 100 mol/min at a temperature of 25°C and a pressure of 8 bar whilst the air is fed at a temperature of 150°C and a pressure of 8 bar. Product leaves the reactor at 700°C and 8 bar at the following component flows: 90 mol NO/min, 150 mol H2O/min, 716 mol Nz/min and 69 mol O2/min. Determine the air supply to the reactor in moles and its composition in volume % if air is assumed to consist of nitrogen and oxygen.
The air supply to the reactor is 1250 mol/min, and its composition in volume percent is approximately 91.20% nitrogen (N₂) and 8.80% oxygen (O₂).
To determine the air supply to the reactor in moles and its composition in volume percent, we need to consider the stoichiometry of the reactions and the component flows of the product.
Given data:
Ammonia feed rate: 100 mol/min
Ammonia feed temperature: 25°C
Ammonia feed pressure: 8 bar
Air feed temperature: 150°C
Air feed pressure: 8 bar
Product temperature: 700°C
Product pressure: 8 bar
Product component flows: 90 mol NO/min, 150 mol H2O/min, 716 mol N₂/min, and 69 mol O2/min
First, let's determine the molar flow rate of nitrogen (N₂) and oxygen (O₂) in the product:
The stoichiometry of the reactions tells us that for every 4 moles of NH3, we get 4 moles of NO and 6 moles of H2O.
From the product component flows, we have 716 mol N₂/min and 69 mol O₂/min.
Since the product does not contain any NH₃, all the nitrogen in the product is from the air fed into the reactor. Thus, the molar flow rate of nitrogen (N₂) in the air is 716 mol/min.
The molar flow rate of oxygen (O₂) in the air can be determined by subtracting the molar flow rate of nitrogen (N₂) from the total molar flow rate of oxygen in the product, which is 69 mol/min. Therefore, the molar flow rate of oxygen (O₂) in the air is 69 mol/min.
Next, let's determine the mole ratio of nitrogen to oxygen in the air supply:
The molar flow rate of nitrogen (N₂) in the air is 716 mol/min.
The molar flow rate of oxygen (O₂) in the air is 69 mol/min.
Therefore, the mole ratio of nitrogen to oxygen in the air supply is 716:69, which can be simplified to 358:34 or 179:17.
Finally, let's determine the air supply to the reactor in moles and its composition in volume percent:
The ammonia feed rate is given as 100 mol/min.
Since the stoichiometry of the first reaction tells us that 4 moles of NH₃ react with 5 moles of O₂, the moles of air required for the reaction can be calculated as (100/4) * 5 = 1250 mol/min.
The air supply to the reactor is therefore 1250 mol/min.
To determine the composition of the air in volume percent, we need to calculate the volume of nitrogen (N₂) and oxygen (O₂) in the air.
The molar volume of an ideal gas at standard temperature and pressure (STP) is 22.4 L/mol.
The volume of nitrogen (N₂) in the air is 716 mol/min * 22.4 L/mol = 16038.4 L/min.
The volume of oxygen (O₂) in the air is 69 mol/min * 22.4 L/mol = 1545.6 L/min.
The total volume of the air supply is 16038.4 L/min + 1545.6 L/min = 17584 L/min.
The volume percent of nitrogen (N₂) in the air is (16038.4 L/min / 17584 L/min) * 100% = 91.20% (approximately).
The volume percent of oxygen (O₂) in the air is (1545.6 L/min / 17584 L/min) * 100% = 8.80% (approximately).
To know more about supply:
https://brainly.com/question/29995980
#SPJ4
Which one of the following alkyl halides will be the most reactive alkyl halide towards the SN2 reaction? i) tert-butyl chloride ii) tert-butyl iodide iii) methyl chloride iv) methyl iodide v) isopropyl chloride vi) ethyl bromide methyl chloride will be the most reactive ethyl bromide will be the most reactive tert-butyl iodide will be the most reactive methyl iodide will be the most reactive isopropyl chloride will be the most reactive tert-butyl chloride will be the most reactive
The most reactive alkyl halide towards the SN2 reaction is the one that has the least steric hindrance and the most polarizable bond. The correct answer is "methyl iodide will be the most reactive". The correct answer is option iv)
The reaction between a nucleophile and a primary or secondary alkyl halide occurs via a bimolecular nucleophilic substitution mechanism (SN2). The most reactive alkyl halide in an SN2 reaction is one with a leaving group that is polarizable and that has the least steric hindrance. The size of an atom or a bond increases as we move down a group in the periodic table.
As a result, the C-I bond in methyl iodide is more polarizable than the C-Cl bond in methyl chloride. In addition, the iodide ion is a better leaving group than the chloride ion because it is more polarizable and less stable. As a result, the SN2 reaction is more likely to occur in methyl iodide.
Learn more about leaving group here:
https://brainly.com/question/31501459
#SPJ11