which of the following is true of a solution? group of answer choices the components of a solution can be separated by filtration. the components of a solution separate on standing. the separation of a solution into its components is a chemical change. the separation of a solution into its components is a physical change.

The segment of the renal tubule that is permeable to water but nearly impermeable to salts is d. descending limb of the loop of Henle.

The loop of Henle is a hairpin loop-shaped tube that is located in the medulla region of the kidney. It has a descending limb and an ascending limb. The descending limb of the loop of Henle is permeable to water but nearly impermeable to salts. It is an essential component of the nephron that helps in the reabsorption of water and other substances from the renal tubules and plays a vital role in the production of concentrated urine.

The reabsorption of water from the descending limb of the loop of Henle occurs via osmosis. As the filtrate flows down the descending limb of the loop of Henle, it becomes more and more concentrated due to the diffusion of salts from the tubule into the surrounding interstitial fluid. As a result, the osmotic gradient between the tubule and the interstitial fluid increases, and water is reabsorbed from the tubule by osmosis.

However, the ascending limb of the loop of Henle is impermeable to water but permeable to salts. This segment actively transports NaCl from the tubule into the interstitial fluid, creating a concentration gradient that promotes the reabsorption of water from the descending limb.

Thus, the loop of Henle is an essential component of the nephron that helps in the reabsorption of water and other substances from the renal tubules and plays a vital role in the production of concentrated urine.

Therefore, the correct option is d.

To know more about renal tubule segment, visit: https://brainly.com/question/29978869

#SPJ11

Because the electrons are switching between one side of the cell and the other, to maintain charge balance.

The correct option is C.

The salt bridge is frequently an upside-down glass U-shaped tube filled with table salt in empirical settings. In order to create an electrochemical cell, its two legs dip into two different electrolyte vessels (the half-cells).

The salt bridge's job is to maintain the solutions' electrical neutrality while allowing unrestricted ion passage across cells. The absence of the salt bridge will result in a buildup of both positive and negative charges surrounding the electrodes, which will stop the reaction.

To know more about Salt-Bridge visit:

https://brainly.com/question/9962244

#SPJ1

The complete question is -

What is the main purpose of a salt bridge?

A-To maintain solution volume to allow higher concentration solution

B-To migrate to lower concentration solution.

C-To maintain charge balance because the electrons are moving from one-half cell to the other.

D-To allow exchange of metal cations only

If the shot was wet and included water at the same temperature as the shot, the extra water would increase the total heat capacity of the calorimeter and reduce the temperature change measured.

A calorimeter is a device used to measure the amount of heat energy released or absorbed in a chemical reaction. It is typically a closed container that consists of two compartments, one which holds the reactants and another which captures the heat released during the reaction. The heat energy absorbed or released is calculated by measuring the temperature change of the reactants and the calorimeter itself. Calorimeters are commonly used in chemistry labs to help students better understand the concepts of heat energy and chemical reactions.

This is because the extra water would absorb some of the heat released by the shot, reducing the amount of heat available to heat up the calorimeter and its contents. Therefore, the temperature change would be smaller than if the shot were dry.

To learn more about calorimeter

https://brainly.com/question/30873343

#SPJ1

the bromination of propane is a highly exothermic and spontaneous reaction that proceeds through a radical mechanism. The reaction kinetics are dependent on the concentrations of propane and bromine, while the thermodynamics indicate that the reaction is favorable under normal conditions.

The bromination of propane is a substitution reaction in which one or more hydrogen atoms on the propane molecule are replaced by bromine atoms. This reaction is initiated by the homolytic cleavage of the bromine molecule into two bromine radicals, which react with propane to form a mixture of products including 1-bromopropane, 2-bromopropane, and hydrogen bromide.

The mechanism of the reaction involves three steps:

1. Initiation: The reaction is initiated by the homolytic cleavage of the bromine molecule into two bromine radicals, each of which has an unpaired electron.

Br2 → 2 Br•

2. Propagation: The bromine radical reacts with propane to form a propane radical and hydrogen bromide. The propane radical then reacts with a bromine molecule to form a new bromine radical and a mixture of 1-bromopropane and 2-bromopropane.

Br• + C3H8 → C3H7• + HBr
C3H7• + Br2 → C3H7Br + Br•

3. Termination: The reaction terminates when two radicals combine to form a stable molecule, or when all of the bromine radicals have been consumed.

The kinetics of the reaction can be described by the rate law:

Rate = k [C3H8] [Br2]

where k is the rate constant and [C3H8] and [Br2] are the concentrations of propane and bromine, respectively. The reaction is second-order with respect to propane and first-order with respect to bromine.

The thermodynamics of the reaction can be described by the change in Gibbs free energy (∆G), enthalpy (∆H), and entropy (∆S). The reaction is exothermic (∆H < 0) and spontaneous (∆G < 0) at room temperature. The entropy change (∆S) is positive, indicating that the disorder of the system increases during the reaction.

Overall, the bromination of propane is a highly exothermic and spontaneous reaction that proceeds through a radical mechanism. The reaction kinetics are dependent on the concentrations of propane and bromine, while the thermodynamics indicate that the reaction is favorable under normal conditions.
To know more about Bromination go through -

https://brainly.com/question/31325887

#SPJ4

When two items with different temperatures come into touch with one another, energy moves from the hotter (higher temperature) object to the cooler (lower temperature) object until both objects reach the same temperature.

To learn more anout Potential energy, refer to:

https://brainly.com/question/14427111

Answer: thermal energy is transferred from the warmer substance to the cooler substance

Explanation:

The specific heat of the metal is 21,695.047 J/g/deg

The water will develop heat as a result of heat being transmitted from the hot metal to the colder water. The metal and the water will both be the same temperature (56C) at the conclusion.

The heat (q) is determined by multiplying the mass (m) by the specific heat (C) and the temperature change (ΔT).

q = mC∆T

For the metal: q = (2.34kg) (C J/g/deg) (129deg - 88deg)

                        q = 301.86- 205.92

                        q = 95.94 C

For the water: q = (15,546g) (4.184 J/g/deg) (88 deg - 56 deg) 

= 65,044.464*88 - 65,044.464*56

= 2081422.848 J

95.94 C = 2081422.848

C = 2081422.848/95.94 = 21,695.047

C = 21,695.047 J/g/deg --> specific heat of the metal

Learn more about heat here:

https://brainly.com/question/23177729

#SPJ4

A solution that has more solute than the saturated solution at a given temperature is known as a supersaturated solution.

A supersaturated solution is a solution that contains a higher concentration of solute than the saturation level at a given temperature. At the saturation point, no more solute can dissolve into the solvent. In such a case, the solvent is said to be saturated. The process of preparing a supersaturated solution is by dissolving a larger amount of solute than the solvent can dissolve at a particular temperature. The excess solute is not completely soluble at lower temperatures but dissolves when the temperature increases or a seed crystal is added.

In other words, the solubility of the solute in the solvent increases with temperature. Supersaturated solutions are highly unstable as they contain a higher amount of solute than what the solvent can dissolve. A supersaturated solution is in a metastable state. In a metastable state, the excess solute will remain in solution until some stimulus, such as adding a seed crystal, causes the solute to precipitate.

Learn more about supersaturated solution here: https://brainly.com/question/2800726

#SPJ11

Answer: C. Nuclear fusion begins when a large, unstable nucleus is bombarded with a smaller particle.

Explanation:  While this statement provides some information about nuclear fusion, it does not offer additional details or insights into the process.  It simply describes the initial stage of nuclear fusion, where a large, unstable nucleus is bombarded with a smaller particle.  This statement does not provide further information about the energy produced or the applications of nuclear fusion.

Learn more about nuclear fusion here: https://brainly.com/question/14019172.

The Lewis dot diagram for oxygen consists of 2 paired and 2 unpaired electrons.

A Lewis dot diagram is a diagram that represents the valence electrons in an atom. The valence electrons are the electrons present in the outermost energy level of an atom.Lewis dot diagrams are also referred to as electron dot diagrams or Lewis structures. They are named after Gilbert N. Lewis, who is credited with their invention.

The following is the Lewis dot diagram for oxygen:

In this diagram, the oxygen atom is represented by the letter O.

The two dots represent the two electrons in the first energy level, while the two pairs of dots represent the two lone pairs in the second energy level.

The two unpaired electrons are represented by the two half-dots. These electrons are in the second energy level and are not part of a lone pair.

Learn more about lewis dot structure of oxygen : https://brainly.com/question/10402609

#SPJ11

The Breadknife is made-up of  trachyte.

The rock formation is composed of volcanic rock known as trachyte. Trachyte is a type of igneous rock that is typically light in color, fine-grained, and contains large crystals of feldspar. The trachyte that makes up the Breadknife is believed to have formed about 17 million years ago during the Miocene Epoch, through the cooling and solidification of magma that rose to the surface.

The unique shape of the Breadknife is due to the erosion of the surrounding softer sedimentary rock, which has left the harder trachyte exposed as a narrow ridge with steep sides.

To learn more about solidification refer to:

brainly.com/question/392491

#SPJ4

The movement of H+ ions across the membrane from the intermembrane space to the matrix causes synthase to spin and make ATP. The correct answer is Option C.

Adenosine triphosphate (ATP) is a type of organic molecule known as a nucleotide, which is important in metabolism and energy transfer within cells. ATP consists of a molecule of adenosine and a chain of three phosphate groups that are bound together by high-energy bonds. The chemical bond between the second and third phosphate groups of ATP is the highest energy bond in the molecule, and it stores energy that can be utilized in cellular reactions.

ATP synthase is an enzyme found in the inner mitochondrial membrane that catalyzes the formation of ATP from ADP and inorganic phosphate using energy from the electrochemical gradient established by the transport of H+ ions across the membrane. Therefore, the movement of H+ ions across the membrane from the intermembrane space to the matrix causes synthase to spin and make ATP.

Learn more about Adenosine triphosphate (ATP) here: https://brainly.com/question/897553

#SPJ11

The solubility criteria for typical ionic chemicals in order to decide which combination would not precipitate in an aqueous solution. The correct option is  E) All of the combinations will form precipitates, as all of the provided combinations would result in precipitates.

A) Sr(NO₃)₂ and NaOH: In accordance with the solubility requirements, all Group 1 metal hydroxides (OH-), including NaOH, are soluble with the exception of LiOH. Sr(NO₃)₂ and NaOH would therefore precipitate.

B) AgNO₃ and KBr: Silver chloride (AgCl), silver bromide (AgBr), and silver iodide (AgI) are insoluble according to the solubility laws. AgNO₃ and KBr would therefore precipitate.

C) Sulfides (S2-) of Group 2 metals, such as ZnS, are insoluble, according to the solubility criteria. This includes Zn(C2H₃O₂)₂ and Na₂S. Acetates (C₂H₃O₂), on the other hand, are often soluble. Zn(C₂H₃O₂)₂ and Na₂S would therefore precipitate.

D) Pb(NO₃)₂ and Na₂SO₄: Sulfates (SO₄-) are typically soluble, with a few outliers like BaSO₄, PbSO₄, and SrSO₄, according to the solubility criteria. Pb(NO₃)₂ and Na₂SO₄ would therefore precipitate.

The correct response is: as all of the provided combinations would result in precipitates.

E) All of the combinations will form precipitates.

To know more about solubility:

https://brainly.com/question/31493083

#SPJ12

It is impossible to estimate how many teaspoons would be produced without understanding the density of the silver.

In an electrolytic cell, the amount of substance that is deposited on the electrode is directly proportional to the amount of charge that passes through the cell. The charge passed (Q) can be calculated by multiplying the current (I) by the time (t) for which it flows.

Q = I × t

In this case, the current is 5 amperes and the time is 2.5 hours. Converting hours to seconds, we get:

t = 2.5 hours × 3600 seconds/hour = 9000 seconds

So, the charge passed is:

Q = 5 amperes × 9000 seconds = 45,000 coulombs

The amount of silver deposited is proportional to the charge passed. The electrochemical equivalent of silver (the mass of silver deposited per unit charge passed) can be looked up in a table or calculated from the formula for the electrolysis reaction. For the reduction of Ag+ to Ag, the electrochemical equivalent is 0.001118 g/coulomb.

So, the mass of silver deposited is:

m = electrochemical equivalent × Q = 0.001118 g/coulomb × 45,000 coulombs = 50.31 g

Converting grams to teaspoons depends on the density of silver, which varies depending on the form it is in. Therefore, without knowing the density of the silver, it is not possible to determine the number of teaspoons that would be produced.

To learn more about electrolytic cell refer to:

brainly.com/question/4030224

#SPJ4

The pH at the equivalence point is approximately 2.78, when 50 ml of 0.2m pyridine ( kb - 1.7 × 10⁻⁹ is titrated with 0.2 m HCl ).

In chemistry, the equilibrium constant, denoted by K, is a quantitative measure of the extent to which a chemical reaction proceeds to completion. It is a constant value that characterizes the ratio of the concentrations of reactants and products at chemical equilibrium, which is the state at which the rates of the forward and reverse reactions are equal.

The equilibrium constant is defined as the product of the concentrations of the products raised to their stoichiometric coefficients, divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. Mathematically, this can be written as:

K = [tex](C^{c} D^{d} ) / (A^{a} B^{b} )[/tex]

where A, B, C, and D are the chemical species involved in the reaction, and a, b, c, and d are their respective stoichiometric coefficients.

The titration of pyridine (C₅H₅N) with hydrochloric acid (HCl) is a type of acid-base titration. At the equivalence point, all of the pyridine has reacted with the HCl to form pyridinium chloride (C₅H₅NHCl) and the pH of the solution is determined by the salt formed.

The chemical equation for the reaction between pyridine and HCl is:

C₅H₅N + HCl → C₅H₅NHCl

At the equivalence point, the moles of HCl added are equal to the moles of pyridine initially present.

Initial moles of pyridine = (0.2 mol/L) x (0.050 L) = 0.01 moles

At the equivalence point, 0.01 moles of HCl will have been added.

The reaction between pyridine and HCl is a basic reaction since pyridine is a weak base and HCl is a strong acid. The pyridine accepts a proton (H⁺) from the HCl to form the conjugate acid, pyridinium ion (C₅H₅NH⁺). The pyridinium ion is a weak acid that undergoes hydrolysis to form hydronium ion (H₃O+) and pyridine:

C₅H₅NH⁺  + H₂O ⇌ C₅H₅N + H₃O⁺

The equilibrium constant for this reaction, Kb, is related to the equilibrium constant for the hydrolysis reaction, Kw, as follows:

Kb x Kw = Kw

Kb = Kw / Kw = 1.0 x 10⁻¹⁴ / 1.7 x 10⁻⁹= 5.88 x 10⁻⁶

At the equivalence point, the concentration of pyridine and pyridinium ion are equal, and the pH can be calculated using the Kb expression:

Kb = [C₅H₅N][H₃O⁺] / [C₅H₅NH⁺]

Since [C₅H₅N] = [C₅H₅NH⁺] = 0.01 moles / 0.050 L = 0.2 M at the equivalence point, we can simplify the expression to:

Kb = [H₃O⁺]² / 0.2

[H₃O⁺]² = Kb x 0.2

[H₃O⁺] = √(Kb x 0.2) = √(5.88 x 10⁻⁶ x 0.2) = 1.67 x 10⁻³ M

pH = -log[H₃O⁺] = -log(1.67 x 10⁻³) = 2.78

To know more about equilibrium constant, visit:

https://brainly.com/question/10038290

#SPJ1

One Arrhenius acid ( CH₃OH ) and one Arrhenius base (NaOH) are represented by this combination. (NaOH).

The Arrhenius theory defines an acid as a substance that produces H⁺ ions when dissolved in water, and a base as a substance that produces OH⁻ ions when dissolved in water. Therefore, in the given options, NaOH represents an Arrhenius base because it dissociates in water to form OH⁻ ions.

Among the given options, the pair representing one Arrhenius acid and one Arrhenius base is CH₃OH and NaOH. Methanol (CH₃OH) does not contain H⁺ ions in its molecular structure, and it does not ionize in water to produce H⁺ ions. On the other hand, NaOH dissociates in water to form OH⁻ ions, indicating that NaOH is an Arrhenius base.

Therefore, the pair CH₃OH and NaOH represents one Arrhenius acid (CH₃OH) and one Arrhenius base (NaOH).

To learn more about  arrhenius acid refer to:

brainly.com/question/9936252

#SPJ4

The pair of compounds that represents one Arrhenius acid and one Arrhenius base is CH3OH and NaOH. CH3OH, also known as methanol, is a weak Arrhenius acid because it can donate a proton (H+) in solution.

NaOH, also known as sodium hydroxide, is a strong Arrhenius base because it can accept a proton (H+) in solution. When these two compounds are mixed in a solution, they will undergo a neutralization reaction, where the methanol will donate a proton to the hydroxide ion from NaOH to form water (H2O). The resulting solution will be basic due to the excess hydroxide ions from NaOH.

To learn more about Arrhenius acid visit;

https://brainly.com/question/518989

#SPJ4

By the use of the principles of stoichiometry of the reaction, the number of moles of NO is 4.75 moles

Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves using balanced chemical equations to calculate the amounts of reactants needed and the amounts of products produced in a reaction.

We know that;

8 moles of HNO3 produces 2 moles of NO

19 moles of HNO3 can make x moles of NO

x = 19 * 2/8

x = 4.75 moles

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The researchers faced an uncertainty about whether the signals observed in certain mass spectrometry data were due to lead isotopes as mass is only one of the characteristics of an element, and there are many other elements that can have the same mass as lead.

Mass spectrometry is a scientific technique that helps in the study of chemical substances. It involves creating a charged particle (ion) and measuring the mass-to-charge ratio (m/z) of the ion to identify its composition. Mass spectrometry is an important tool in isotopic analysis as it can distinguish between different isotopes of the same element by their differing masses.

However, mass spectrometry cannot distinguish between isotopes that have very similar masses. For example, lead has four naturally occurring isotopes, lead-204, lead-206, lead-207, and lead-208. The masses of these isotopes are 203.973, 205.974, 206.975, and 207.976 atomic mass units (amu), respectively. Since the differences in their masses are relatively small, mass spectrometry alone is not enough to distinguish between them.

The researchers in this scenario faced uncertainty because they could not be sure that the signals observed in certain mass spectrometry data were due to lead isotopes. The uncertainty arose because the mass spectrometry technique cannot differentiate between isotopes that have very similar masses. Therefore, information about the mass of the isotopes alone was not sufficient for identifying the isotopes.

Learn more about Mass spectrometry:

https://brainly.com/question/14569480

#SPJ11

Answer: 3-methyl-ethoxy-propanol

Explanation:

The organic molecule CH2OCH2CHOH is a diol, which means it contains two hydroxyl (-OH) groups. It is also known as ethylene glycol, and it has the molecular formula C2H6O2.

Ethylene glycol is a colorless, odorless, and sweet-tasting liquid that is commonly used as a solvent, antifreeze, and in the production of polyester fibers and resins.

It is also highly toxic if ingested, as it can cause kidney failure and other serious health problems.

Therefore, it is important to handle ethylene glycol with care and follow proper safety precautions when using it in laboratory or industrial settings.

To know more about ethylene glycol, visit:

https://brainly.com/question/10405060

#SPJ1

In order to elevate the water's temperature from 25°C to 55°C, 3348 calories of heat were given to it.

Calories are used to measure heat. The energy needed to heat one gramme of water by one degree Celsius is equal to one calorie. You divide the difference in temperature of a sample of water by the mass of the water to calculate heat.

The following formula can be used to determine the heat added to the water:

Q = m * c * ΔT

Substituting the given values, we get:

Q = (111.6 g) * (1 cal/g °C) * (55 °C - 25 °C)

Q = 111.6 * 30

Q = 3348 calories

To know more about temperature visit:-

https://brainly.com/question/29072206

#SPJ1

The polar bond is a covalent bond in which a pair of electrons is shared unequally between two atoms, one of which has a stronger electronegativity than the other.  In each group of three bonds, the O-H bond is the most polar, and the C-H bond is the least polar.

What is the electronegativity trend in the periodic table?

The electronegativity trend on the periodic table is that it increases from left to right and decreases from top to bottom. The most polar bond is O-H, and the least polar bond is C-H.

The electronegativity of an element is said to diminish as one moves down a category in the periodic chart.The fluorine atom possesses the greatest electronegativity in this situation (4.0)

Electronegativity

The propensity of an element to attract a common pair of electrons (electron density) toward itself is referred to as the trend, and it is denoted by the symbol.

Trend is one of the molecular properties.

The electronegativity of an atom is influenced not only by its atomic number but also by the distance at which its valence electrons reside from the charged nucleus of the atom.

To know more about the polar bond https://brainly.com/question/10777799

#SPJ11

The reactions between bases and acids don't happen. Electrolytes are substances that dissolve in water (or another polar solvent) to form an electrically conducting solution.

Because they can move, ions can ionise in solutions. Because conductivity in water is caused by electricity moving back and forth between ions, it increases as salt (Na+) or chlorine (Cl-) combine to form table salt in saltwater.

A substance can function as both a Brnsted base and an acid. The table above has entries for H2O, OH, HSO4, and NH3 in both columns, for instance. Water serves as the ideal illustration of this behaviour because, when it creates the H3O+ or OH- ions, it functions both as an acid as well as a base.

To know more about Electrolytes visit:

https://brainly.com/question/29771118

#SPJ1

Therefore, when 17.4 moles of HNO3 are consumed, 104.37 grams of water can be produced.

As there is sufficient oxygen available for the burning of the methane, there is no need for a limiting reagent in the reaction, which results in the production of carbon dioxide and water. Hence, the reaction results in the formation of 54 g of water.

Using the balanced chemical equation:

1 mole of HNO3 reacts to form 2 moles of H2O

So, 17.4 moles of HNO3 will produce:

2 moles of H2O x (17.4 moles HNO3 / 6 moles HNO3) = 5.8 moles of H2O

To calculate the grams of water produced, we need to use the molar mass of water:

Molar mass of H2O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol

So, 5.8 moles of H2O is equal to:

5.8 moles H2O x 18.015 g/mol = 104.37 g of H2O

To know more about moles visit:-

brainly.com/question/26416088

#SPJ1

Among the given options, the weak electrolytes are NH₃ and CH₃OH.

NH₃ (ammonia) is a weak base, and when it dissolves in water, it produces ammonium ions (NH₄⁺) and hydroxide ions (OH⁻), but only to a limited extent.

CH₃OH (methanol) is a polar molecule and can form hydrogen bonds with water, but it does not ionize or dissociate into ions when dissolved in water. Therefore, it is considered a weak electrolyte.

On the other hand, CaSO₄ (calcium sulfate) and AgCl (silver chloride) are both ionic compounds that dissociate into ions in water and conduct electricity well. Therefore, they are strong electrolytes.

In summary, NH₃ and CH₃OH are weak electrolytes, while CaSO₄ and AgCl are strong electrolytes.

To learn more about electrolytes refer to:

brainly.com/question/29771118

#SPJ4

The statement the catastrophe of polychroinated biphenyls (PCBs) gases released from a Union Carbide pesticide factory caused thousands of deaths and disabling conditions in Bhopal, India is TRUE.

Polychlorinated biphenyls (PCBs) are a group of man-made chemicals that were widely used in industry during the twentieth century. PCBs were used in a variety of industrial applications, such as as coolant fluids in transformers, capacitors, and other electrical equipment, as well as in hydraulic systems, heat transfer systems, and lubricants.

In addition, PCBs have been linked to a number of human health problems, including cancer, immune system dysfunction, neurobehavioral and developmental problems, reproductive and endocrine disorders, and other illnesses. Therefore, it is critical that all sources of PCBs be identified and safely eliminated or reduced to minimize people's exposure to this hazardous chemical.

To know more about Union Carbide, refer here:

https://brainly.com/question/4499981#

#SPJ11

A 665 mg tablet of Excedrin contains 250 mg of acetaminophen, 250 mg of aspirin, 65 mg of caffeine, and 100 mg of inactive ingredients. If we are working with 75 mg of powdered Excedrin, you will need to use ratios and proportions to calculate the amount of each compound present in a 75 mg sample of Excedrin.

To find out how much of each component is in 75 mg of Excedrin, we will use the ratio:

Let's do this for each of the compounds:

1. Acetaminophen: 665 mg: 250 mg = 75 mg: x

solve for x.

250 x 75 = 665 x

250 x 75 / 665 = x

Therefore, there are about 28.25 mg of acetaminophen in 75 mg of powdered Excedrin.

2. Aspirin: 665 mg: 250 mg = 75 mg: x

Solve for x.

250 x 75 = 665 x

250 x 75 / 665 = x

Therefore, there are about 28.25 mg of aspirin in 75 mg of powdered Excedrin.

3. Caffeine: 665 mg: 65 mg = 75 mg: x

solve for x. 65 x 75 = 665 x

x = 4875 / 665

Therefore, there are about 7.33 mg of caffeine in 75 mg of powdered Excedrin.

4. Inactive ingredients: 665 mg: 100 mg = 75 mg: x

solve for x.

100 x 75 = 665 xx = 7500 / 665

Therefore, about 11.28 mg of inactive ingredients are in 75 mg of powdered Excedrin.

#SPJ11

Learn more about ratios and proportions: What is the meaning of ratios and proportions? https://brainly.com/question/12024093

Answer: 6.2 NA

Explanation:

By acting as a competitive inhibitor of the enzyme dihydropteroate synthase (DHPS), which is involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.

By acting as a competitive inhibitor of dihydropteroate synthase (DHPS), an enzyme involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.

Sulfanilamide inhibits DHPS activity and stops bacteria from generating folic acid by attaching to the enzyme's active site and blocking the substrate from binding. Sulfanilamide has a bacteriostatic action as a result of this, which prevents bacteria that depend on folic acid for living from growing and replicating.

learn more about folic acid here

https://brainly.com/question/4372756

#SPJ1

No the major product does not depend on whether we start with the r or s enantiomer of the reactant.

Generally, a stereospecific reaction is defined as the reaction in which different stereoisomers react to give different stereoisomers of the product. Lets consider an example, if the substrate is an R enantiomer, a frontside nucleophilic attack results in retention of configuration, and the formation of the R enantiomer.

Basically a counterclockwise or anticlockwise direction is an S (sinister, In Latin for left) configuration and a clockwise direction is an R (rectus, In Latin for right) configuration. R or S of the enantiomer usually don't apply any impact on the major product formed.

Learn more about stereochemistry from the link given below.

https://brainly.com/question/28658912

#SPJ4