which of the following statements are true of both acids and bases? this question will not give partial credit. question 1 options:when dissolved in water, they can conduct electricity they produce ions in solution they are electrolytes they dissolve in waterthey react with metalsthey contain more hydrogen ions than hydroxide ions

The equilibrium shift in reverse direction. adding the Hcl increases the jobs of H+ and U-  in the answer  to set up the equilibrium more reactant are formed



To reach equilibrium, the device must growth the quantity of reactants, so an equilibrium shift within the opposite course is located. The reaction of the SbClz in solution with the brought H' and Cl' in solution also contributes to the shift in equilibrium, as more merchandise are fashioned. The internet effect of the addition of HCl is an equilibrium shift within the reverse direction.

To recognize greater approximately reverse direction click right here
brainly.com/question/30440442
#SPJ4

A gas has a mass of 3.82 g and occupies a volume of 0.854 l. the temperature in the laboratory is 302 k, and the air pressure is 1.04 atm, the molar mass of the gas is: 107 g/mol.

A gas has a mass of 3.82 g and occupies a volume of 0.854 L,
while the temperature in the laboratory is 302 K and the air pressure is 1.04 atm.

We will now calculate the molar mass of the gas using the following formula: PVM = mRT
where, P represents the pressure in atm, V is the volume in litres, n is the number of moles, R is the gas constant which is 0.0821 L-atm/mol-K, and T is the temperature in Kelvin.
P = 1.04 atm, V = 0.854 L, T = 302 K and we have to find n which is the number of moles of the gas.

Rearranging the equation to solve for n gives:n = PV/RT
Putting values we getn = (1.04 atm)(0.854 L) / (0.0821 L-atm/mol-K) (302 K)n = 0.0336 mol
The molar mass of the gas is calculated using the following formula: molar mass = mass of the gas / number of moles
molar mass = 3.82 g / 0.0336 mol
molar mass = 113.69 g/mol
Thus, the molar mass of the gas is 107 g/mol (rounded to one decimal place).

To know more about "Molar mass" refer here:

https://brainly.com/question/20552052#

#SPJ11

The intensity of an infrared (IR) absorption band depends on several factors, including:

Concentration of the sample: The intensity of the IR absorption band increases with the concentration of the sample.

Nature of the sample: The intensity of the IR absorption band depends on the chemical nature of the sample, including its functional groups, molecular weight, and structure.

Vibrational frequency of the bond: The intensity of the IR absorption band increases with the vibrational frequency of the bond. Bonds with higher vibrational frequencies absorb more strongly.

Polarizability of the bond: The intensity of the IR absorption band is related to the polarizability of the bond. Bonds that are more polarizable absorb more strongly.

Dipole moment of the molecule: The intensity of the IR absorption band is related to the dipole moment of the molecule. Molecules with higher dipole moments absorb more strongly.

Temperature: The intensity of the IR absorption band decreases with increasing temperature due to thermal effects on the vibrational energy levels.

Interactions with neighboring atoms or functional groups: The intensity of the IR absorption band may be influenced by interactions with neighboring atoms or functional groups, such as hydrogen bonding or steric effects.

To know more about infrared, visit: brainly.com/question/20779091

#SPJ4

The solution with the largest total ion concentration (TIC) is 1.0 M AlCl₃. The correct option is d.

The total ion concentration (TIC) of a solution is the sum of the concentrations of all ions in the solution. When an ionic compound dissolves in water, it dissociates into its constituent ions. The number of ions produced per formula unit of the compound depends on the chemical formula of the compound.

For 1.0 M KNO₃, each formula unit produces 2 ions (K⁺ and NO₃⁻), so the TIC is 1.0 x 2 = 2.0 M. For 1.0 M KCl, each formula unit produces 2 ions (K⁺ and Cl⁻), so the TIC is 1.0 x 2 = 2.0 M. For 1.0 M MgCl₂, each formula unit produces 3 ions (Mg²⁺ and 2 Cl⁻), so the TIC is 1.0 x 3 = 3.0 M. For 1.0 M AlCl₃, each formula unit produces 4 ions (Al³⁺ and 3 Cl⁻), so the TIC is 1.0 x 4 = 4.0 M.

Therefore, among the given solutions, 1.0 M AlCl₃ has the largest total ion concentration (TIC), which is option d.

To know more about total ion concentration, refer here:

https://brainly.com/question/13457837#

#SPJ11

Fatty acids receive 2-carbon units from malonyl-CoA, which assigns them to the production of fatty acid chains. Acetyl-CoA is carboxylated into malonyl-CoA by the acetyl-CoA carboxylase enzyme.

A 3-carbon dicarboxylic acid called malonate is linked to Coenzyme A in malonyl CoA. Using the biotin component of the enzyme acetyl-CoA carboxylase, malonate is created from acetyl-CoA by adding CO 2.
A crucial molecule in the metabolism of fatty acids is malonyl-CoA. It is both an allosteric inhibitor of the rate-setting phase in mitochondrial long-chain fatty acid oxidation and the rate-determining intermediary in fatty acid production.
The enzymes known as acetyl-CoA carboxylases (ACCs) catalyse the carboxylation of acetyl-CoA to create malonyl-CoA, which is then used by the enzyme fatty acid synthase (FASN) to create long-chain saturated fatty acids.
To know more about malonyl-CoA go through:-

https://brainly.com/question/16260075

#SPJ4

The statements that correctly describe multiple bonds are: A double bond arises when two atoms share two electrons between them. Bond strength increases with the number of electron pairs shared between two atoms. A multiple bond arises when two atoms share two or more electron pairs and Carbon frequently forms multiple bonds.

A double bond arises when two atoms share two electrons between them.Bond strength increases with the number of electron pairs shared between two atoms.A multiple bond arises when two atoms share two or more electron pairs.

Carbon frequently forms multiple bonds. Multiple bonds are covalent bonds where atoms share two or more electron pairs.A double bond forms when atoms share two pairs of electrons (four electrons) with each other. Double bonds can happen between carbon and oxygen, nitrogen, or sulfur atoms, for example.

In general, a multiple bond consists of a single bond, which is two electrons shared between two atoms, as well as other, weaker bonds between the same atoms. A double bond consists of one sigma bond and one pi bond, whereas a triple bond has one sigma bond and two pi bonds.

Carbon is a chemical element with the symbol C and atomic number 6. It is a nonmetallic element with a range of oxidation states (+4, +2, -4) and isotope forms. Carbon is well-known for forming multiple bonds, particularly with itself and nitrogen, oxygen, sulfur, and phosphorus.

Learn more about multiple bonds here:

brainly.com/question/27331499

#SPJ11

The age of the rock can be calculated as follows. In this case, the half-life of potassium-40 is 2.64 billion years.

The rock has only 1/8 of its original potassium-40 remaining. It's requested to find the age of the rock.Step-by-step explanation:
The decay formula is given as:
N(t) = N0 * e^(-λt)
where N0 is the initial amount of potassium-40, λ is the decay constant (related to the half-life by λ = ln(2) / t1/2), and N(t) is the amount remaining after time t.

In this problem, we are given that the rock has only 1/8 of its original potassium-40 remaining. This means that N(t) = (1/8)N0, and we want to solve for the time t.

Taking the natural logarithm of both sides of the first equation and rearranging, we get:
t = (1/λ) * ln(N0/N(t))
Substituting in the given values, we have:
t = (1/λ) * ln(N0 / (1/8)N0)
t = (1/λ) * ln(8)
t = (ln 8) / (λ / ln 2)

To find the value of λ, we can use the half-life of potassium-40:
t1/2 = 1.25 billion years = 1.25 * 10^9 years
λ = ln(2) / t1/2
λ = ln(2) / (1.25 * 10^9)
λ = 5.543 * 10^-10 /year

Substituting this into the previous equation, we have:
t = (ln 8) / (5.543 * 10^-10 /year / ln 2)
t ≈ 2.64 billion years

Therefore, the rock is approximately 2.64 billion years old.

To know more about "Potassium-40" refer here:

https://brainly.com/question/118171645#

#SPJ11

The age of the rock made up of potassium-40 is approximately 3.74 billion years old.

Potassium-40 decays to argon-40 has a half-life of 1.25 billion years. Suppose you find a rock that has only 1/8 of its original potassium-40 still remaining. Half-life of potassium-40, t1/2 = 1.25 billion years, Amount remaining = 1/8 of the original potassium-40.

Let the original amount of potassium-40 be P.

Rate of decay of potassium-40 = kP = P0 e^(-kt) Where, P0 is the original amount of potassium-40 and t is the time.

Arranging the above equation for t, we get: t = ln(P0/P)/k

Taking natural log both sides

P/P0 = (1/2)^(t/t1/2)ln(P/P0) = ln(1/2) t/t1/2t = (t1/2/ln(1/2)) ln(P0/P)

Substituting the given values,

t = (1.25 x 10^9/0.693) ln(1/(1/8))= (1.8 x 10^9) ln(8)= (1.8 x 10^9) (2.08)= 3.74 x 10^9 years

To know more about potassium-40, refer here:

https://brainly.com/question/9295288#

#SPJ11

The equilibrium concentrations are [H₂] = 1.685 M, [F₂] = 1.685 M, and [HF] = 2.630 M.

Let's first write the balanced equation for the formation of hydrogen fluoride from hydrogen and fluorine:

H₂(g) + F₂(g) ⇌ 2HF(g)

The equilibrium constant expression for this reaction will be:

Kc = [HF]² / [H₂] [F₂]

where the square brackets indicate the equilibrium concentrations of each species.

We are given that the equilibrium constant is 1.15 x 10². Now we can use an ICE (Initial-Change-Equilibrium) table to calculate the equilibrium concentrations of all species:

H₂ F₂ 2HF

Initial 3.000 M 3.000 M 0

Change -x -x +2x

Equilib 3.000-x 3.000-x 2x

where x will be the change in concentration at equilibrium.

Substituting these values into the equilibrium constant expression and solving for x, we get:

1.15 x 10² = (2x)² / (3.000-x)²

Solving for x, we get:

x = 1.315 M

Therefore, the equilibrium concentrations of each species are:

[H₂] = 3.000 - x = 1.685 M

[F₂] = 3.000 - x = 1.685 M

[HF] = 2x = 2.630 M

To know more about equilibrium concentrations here

https://brainly.com/question/16645766

#SPJ4

Thermoluminescence can date sediments and rocks directly

Radiocarbon dating, also known as carbon-14 dating, is a technique used to estimate the age of carbon-containing materials that have been preserved in the last 50,000 years. It is widely used in geology, archaeology, and paleontology.The theory behind carbon dating is straightforward: living organisms absorb carbon from their environment and use it to create new organic compounds. Carbon-14 is a radioactive isotope of carbon that is absorbed by organisms at the same rate as ordinary carbon. Carbon-14 decays at a constant rate, and measuring the amount of carbon-14 in a sample can provide an estimate of how long it has been since the organism died or the carbon-containing material was formed.

Thermoluminescence (TL) dating, on the other hand, is a technique used to date sediments and rocks directly. It is based on the fact that when rocks are heated, they emit light energy. This light energy is trapped within the crystal structure of the rock, and over time, it accumulates. By measuring the amount of light energy trapped within a sample, scientists can estimate how long it has been since the sample was last heated.

Learn more about radiocarbon dating : https://brainly.com/question/11397015

#SPJ11

i)   Either Q or R could potentially form an ionic bond with S because the element S has the highest electronegativity (6), while the other two elements have lower electronegativity values.

ii)

S and Q are more likely to form a polar covalent bond because the electronegativity difference between S and Q (6 - 3.64 = 2.36) is greater than the electronegativity difference between S and R (6 - 3 = 3).

iii)

The electronegativity difference between Q and R (3.64 - 3 = 0.64) is relatively small, indicating that they are more likely to form a non-polar covalent bond.

In a polar covalent bond, the electrons are shared unequally between the two atoms, thus creating a partial positive charge on one atom and a partial negative charge on the other.

The greater the difference in electronegativity between the two atoms, the more polar the bond will be.

Learn more about  polar covalent bond, at: https://brainly.com/question/3978603

#SPJ1

When answering questions on the Brainly platform, it is important to be factually accurate, professional, and friendly. Conciseness is also key, so it is important to avoid providing extraneous amounts of detail. It is important to pay close attention to the question and not ignore any typos or irrelevant parts.

The following terms should be used in your answer for this question: Al(CIO2)3 AsCl3 Pb(C,H3O2)2 Cu(NO2)2 Cl207 Ca3 (PO4)2 MGCO3 lonic Molecular.Ionic compounds: Al(CIO2)3, Pb(C,H3O2)2, Ca3 (PO4)2, MGCO3.Molecular compounds: AsCl3, Cu(NO2)2, Cl207.Ionic compounds are made up of oppositely charged ions, whereas molecular compounds are made up of covalently bonded atoms that share electrons. Al(CIO2)3, Pb(C,H3O2)2, Ca3 (PO4)2, and MGCO3 are all examples of ionic compounds because they are composed of metal and non-metal atoms, which have different electronegativity values and can transfer electrons to form ions. In contrast, AsCl3, Cu(NO2)2, and Cl207 are examples of molecular compounds because they are composed of covalently bonded non-metal atoms that share electrons to form a stable molecule.In summary, when answering questions on Brainly, it is important to provide accurate and concise information that is relevant to the question being asked. In this particular question, the terms ionic and molecular were used, and it was important to provide examples of each type of compound.

for more such question on Molecular

https://brainly.com/question/24191825

#SPJ11

1) The most reactive compound is phenol because the  electron donating character of the alcohol group increases the rate of the reaction.

2) The least reactive compound is nitrobenzene because of the electron withdrawing character of the nitro group decreases the rate of the reaction.

The rate of the electrophilic substitution reaction is the directly proportional to the nucleophilicity of the benzene ring. The group which will increase the electron density in the benzene ring that means the electron donating group will increase the nucleophilicity of the Benzene ring which will results in the increase in the rate of the reaction towards the  electrophilic substitution reaction.

1) The phenol that is the OH group is electron withdrawing is the most reactive towards the electrophilic substitution reaction.

2) The -NO₂ group is the ring deactivating group that is it is the less reactive toward the electrophilic substitution.

To learn more about electrophilic substitution here

https://brainly.com/question/16811879

#SPJ4

The furanose form of fructose is generated by a hemiketal formation involving the attack of the C5-hydroxyl group on the C2-ketone, forming a six-membered ring with an oxygen atom.

The furanose form of fructose is generated by formation of a hemiketal involving the attack of the C-hydroxyl group on the C- ketone. This is a chemical reaction which takes place between a ketone group and a hydroxyl group from the same molecule, resulting in the formation of an alcohol and an ether. This is a type of reaction called a hemiketal formation.

The process occurs as follows: A ketone with a hydroxyl group in the same molecule forms a hemiketal, which is a cyclic compound that has an alcohol group and an ether group. The hemiketal is then transformed into a stable, non-cyclic ketal by the addition of another alcohol molecule.

The structure of fructose is as follows:

In fructose, the furanose form is produced when the C5-hydroxyl group attacks the C2-ketone, producing a six-membered ring with an oxygen atom in the ring. The result is a cyclic hemiacetal with five carbons and one oxygen atom.This is shown in the following diagram:

Learn more about chemical reaction: https://brainly.com/question/11231920

#SPJ11

Answer:

1440

Explanation:

32 cans/bundle and there are 45 bundles 32 x 45 = 1440

Avogadro's number is used by chemists to answer questions about particles and mole relationship.

Avogadro's number is defined as the number of units in one mole of any substance. Its molecular weight is measured in grams that is equal to 6.02214076 × 1023. The units may be used for this electrons, atoms, ions, or molecules, depending on the nature of the substance and the character of the reaction. All chemists use the mole unit to represent 6.022 × 10 23 things whether the things are atoms of elements or molecules of compounds. The Avogadro's number is important most important in measuring the mole concept because this number of atoms or molecules has the same mass in grams as one atom or molecule has in atomic mass units.

Avogadro's number represents the number of atoms in one gram atom of an element or the number of molecules in one gram mole of a compound. If we divide the atomic mass of an element by actual mass of its atom we get the value of 6.022×1023.

To learn more about Avogadro's number

https://brainly.com/question/10614569

#SPJ4

We use molality instead of molarity for our calculations because it is a more reliable measure of concentration, especially in cases where temperature changes can affect the volume of the solution.

Molality is defined as the number of moles of solute per kilogram of solvent, whereas molarity is defined as the number of moles of solute per liter of solution. Since molality is based on the mass of the solvent, it is not affected by changes in volume due to temperature changes, making it a more accurate measure of concentration. In contrast, molarity is based on the volume of the solution, which can change with temperature, resulting in inaccurate calculations. Molality is particularly useful in certain applications, such as in the preparation of solutions for cryogenics or in biochemistry.

Find out more about molality

at brainly.com/question/31082216

#SPJ4

Answer: An ionic bond

Explanation: Oppositely charged particles are attracted towards each other. This force is otherwise known as an electrostatic attraction. An ionic bond is the electrostatic attraction that holds atoms together in an ionic compound. I hope this helps!

The number of moles of gas is doubled, the volume of the gas must also double. The new volume of gas is 8.00 L.

This can be expressed mathematically using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature (assumed to remain constant).

We can rearrange the equation to solve for V:

[tex]V = \frac{nRT }{ P}[/tex]

We can plug in the known values to solve for the new volume:

[tex]V = \frac{(0.50 mol)(0.082 L-atm/K-mol)(273 K) }{ 1 atm}[/tex]

V = 8.00 L

Hence, the new gas volume is 8.00 L.

learn more about volume Refer:brainly.com/question/25252629

#SPJ1

The specific heat capacity at constant volume of water vapor is calculated to be 33.1 J/mol·K.

In thermodynamics, heat capacity is defined as the amount of heat required to raise the temperature of a substance by 1 degree celsius.

And, the amount of heat required to raise the temperature of 1 kg of a substance by 1 degree celsius is known as specific heat capacity.

The SI unit of specific heat capacity is SI is joule for every kelvin per kilogram i.e JK⁻¹Kg⁻¹.

For example, the specific heat capacity of water is 4184 JK⁻¹Kg⁻¹, since it takes 4184 joules of energy in order to increase the temperature of 1 kg of water at temperature 1 K.

The specific thermal capacity varies frequently with temperature which can be calculated using the equation:

Cv = 3/2 (R) + 3/2 (R) + 0

R is the gas constant  whose value is 8.314 J/mol·K

Therefore, Cv = 33.1 J/mol·K.

To know more about specific heat capacity here

https://brainly.com/question/29574112

#SPJ4

The balanced chemical equation for the decomposition of potassium chlorate is:

2 KClO3(s) → 2 KCl(s) + 3 O2(g)

According to the equation, 2 moles of KCl are produced for every 2 moles of KClO3 that decompose. The molar mass of KClO3 is 122.55 g/mol, while the molar mass of KCl is 74.55 g/mol. Therefore, we can use the following steps to calculate the amount of KCl produced:

Calculate the number of moles of KClO3:

moles of KClO3 = mass of KClO3 / molar mass of KClO3

moles of KClO3 = 25 g / 122.55 g/mol

moles of KClO3 = 0.2036 mol

Use the mole ratio from the balanced equation to find the number of moles of KCl produced:

moles of KCl = moles of KClO3 x (2 moles of KCl / 2 moles of KClO3)

moles of KCl = 0.2036 mol x (2/2)

moles of KCl = 0.2036 mol

Calculate the mass of KCl produced:

mass of KCl = moles of KCl x molar mass of KCl

mass of KCl = 0.2036 mol x 74.55 g/mol

mass of KCl = 15.18 g

Therefore, 15.18 grams of potassium chloride are produced if 25 grams of potassium chlorate decompose.

Polycyclic Aromatic Hydrocarbons (PAHs) are a category of chemical compounds that consist of at least two aromatic rings combined in different ways. They are a group of organic chemicals that have a common core structure and are made up of multiple fused aromatic rings.

Polycyclic Aromatic Hydrocarbons (PAHs) are a group of complex organic compounds with two or more fused aromatic rings in their structure. PAHs are a result of the incomplete combustion of organic substances and are found in a wide range of environmental materials, including fossil fuels and byproducts, as well as atmospheric emissions from vehicles and industrial operations. PAHs are known carcinogens, and long-term exposure to these chemicals can lead to a variety of health issues. PAHs are found in a variety of environmental substances, including air, soil, and water, as well as in several commercial and industrial products.

Learn more about Polycyclic Aromatic Hydrocarbons: https://brainly.com/question/16963664

#SPJ11

The first energy level of an atom is filled its second energy level which contains three additional electrons the element in this atom is sodium (Na).

The electronic configuration of the atom is determined by the number of electrons in each of its energy levels. Based on the given information, the atom has a filled first energy level and three electrons in its second energy level.

The second energy level can hold a maximum of eight electrons, so the atom has a total of 11 electrons. The element with 11 electrons is sodium (Na), which has an electronic configuration of 1s² 2s² 2p⁶ 3s¹.

Therefore, the atom in question is sodium (Na).

Sodium is highly reactive and must be stored in a dry environment to prevent it from reacting with moisture in the air. It is also highly flammable and can react violently with water, so it must be handled with care. Sodium is commonly found in salt (sodium chloride), which is an essential component of the human diet.

To know more about electronic configuration here

https://brainly.com/question/14283892

#SPJ4

Radical halogenation is a chemical reaction where a halogen atom, such as chlorine or bromine, is introduced to an organic compound through the formation of free radicals. The change in color observed during the reaction is due to the formation and consumption of various reactive species, such as the halogen radicals and the organic radicals, as the reaction progresses.

In the initial stage, halogen molecules (e.g., Cl2 or Br2) dissociate into halogen radicals, which are highly reactive species. These radicals react with the organic compound to form organic radicals, which further react with other halogen molecules. As these species are generated and consumed during the reaction, the concentration of colored species in the reaction mixture changes, leading to the observed color change.

This color change is indicative of the reaction progress and provides insights into the kinetics of the reaction. For example, the appearance of the initial color indicates that the halogen radicals have formed and that the reaction has started. As the color changes or fades, it suggests that the concentration of the reacting species is decreasing, and the reaction is approaching completion. Monitoring the color change can help chemists determine the reaction's progress and efficiency, enabling better control over reaction conditions and product yields.

In summary, the change in color during radical halogenation is caused by the formation and consumption of reactive species, such as halogen and organic radicals. This color change provides valuable information about the reaction progress and can be used as a visual indicator to monitor and optimize the reaction conditions

for more such question on compound

https://brainly.com/question/26487468

#SPJ11

There are four chirality centers in an aldohexose.

Chirality centers are atoms in a molecule that can exist as two non-superposable mirror images, meaning that the molecule can exist in two versions that are mirror images of each other. An aldohexose is a type of sugar containing six carbon atoms and an aldehyde group, and four of its six carbon atoms can exist in two mirror-image versions.

The other two carbon atoms are connected to four hydrogen atoms, which prevents them from being chirality centers. To further explain, let's look at an example: glucose. Glucose has four chirality centers, located at the second, third, fourth, and fifth carbon atoms in the chain.

Each of these chirality centers has two possible arrangements. As a result, glucose can exist in sixteen different configurations.

To know more about chirality centers refer here:

https://brainly.com/question/31114760#

#SPJ11

The solution has a molarity of 0.211 M. (molar).

To determine the molarity of a solution, we need to know the amount of solute (in moles) and the volume of the solution (in liters). In this case, we are given the volume of the solution and the mass of the solute, so we need to use the molar mass of copper (II) sulfate to convert the mass to moles.

The molar mass of copper (II) sulfate is 159.61 g/mol. Therefore, we can calculate the number of moles of copper (II) sulfate as follows:

moles CuSO4 = 50.5 g / 159.61 g/mol = 0.316 moles

Next, we need to calculate the molarity of the solution using the number of moles of copper (II) sulfate and the volume of the solution. The volume of the solution is given as 1.5 liters. Therefore, we can calculate the molarity as follows:

Molarity = moles of solute / liters of solution

Molarity = 0.316 moles / 1.5 liters

Molarity = 0.211 M

Therefore, the molarity of the solution is 0.211 M (molar).

To learn more about molarity refer to:

brainly.com/question/2817451

#SPJ4

The molar heat of neutralization reaction of CH₃COOH is -56.08 kJ/mol.

The formula to calculate the molar heat of neutralization.

∆H° = Σ ∆Hf° (products) - Σ∆Hf°(reactants)

Where,

∆H° = molar heat of neutralization

Σ∆Hf° (products) = sum of the standard heat of formation of products

Σ∆Hf° (reactants) = sum of the standard heat of formation of reactants.

∆H° = [∆Hf° {CH3COO- (aq)} + ∆Hf° {H2O (l)}] - [∆Hf° {CH3COOH (aq)} + ∆Hf° {OH- ​​​​​​​(aq)}]

Substituting the values we get,

∆H° = [(-486.01) + (-285.83)] - [(-485.76) + (-230.0)]

∆H° =  -56.08 kJ/mol

Hence, The molar heat of neutralization reaction of CH₃COOH is -56.08 kJ/mol.

Learn more about molar heat of neutralization from the link given below.

https://brainly.com/question/14156911

#SPJ4

The pH of a 0.0037 M solution of H₂CO₃ is 6.32.

The solubility of CO₂in pure water at 25 °C and 0.1 atm pressure is 0.0037 M. The common practice is to assume that all of the dissolved CO₂ is in the form of carbonic acid (H₂CO₃), which is produced by the reaction between CO₂ and H₂O.

H₂CO₃ is a weak acid that dissociates to form H+ and HCO₃⁻ ions. It is clear that the concentration of the H+ ions produced will be less than the concentration of the H₂CO₃ molecules; this means that H2CO3 will be partially dissociated.The dissociation constant for carbonic acid is given by the expression as shown below;

Ka=[H+][HCO₃⁻]/[H₂CO₃]

The concentration of carbonic acid is given as 0.0037 M, which means [H₂CO₃] = 0.0037 M

and the concentration of  H⁺ ions, as well as HCO₃⁻ ions is assumed to be x.

When H₂CO₃ dissociates, it produces H+ and HCO₃⁻ ions. At equilibrium, the concentrations of the H+ and HCO₃⁻ ions formed are represented as [H+] and [HCO₃⁻], respectively.The balanced equation of the dissociation of H₂CO₃ is:

H₂CO₃ H⁺ + HCO₃⁻

The ion product expression for the dissociation of carbonic acid is given as follows:[H⁺][HCO₃⁻]/[H₂CO₃] = Kd

When [H⁺] and [HCO₃⁻] are equal, we can substitute H⁺ in place of [HCO₃⁻] and thus obtain:[H⁺]2 = Kd × [H₂CO₃] / [HCO₃⁻3-]

On substituting values in the above expression, we get:

[H+]2 = 4.8 × 10-7 M × 0.0037 M / 0.0037 M= 4.8 × 10-7 M

pH = -log [H⁺+]

pH = -log (4.8 × 10⁻⁷-7) = 6.32

Therefore, the pH of a 0.0037 M solution of H₂CO₃ is 6.32.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

Answer:   150-116 = 34

Explanation: no. of neutrons in Ir ⇒ 193-77= 116

                      no. of neutrons in Pu ⇒ 244-94 = 150

so diffrence is 34

Acid diet Positively stained viable microorganisms appear as parallel bacilli or spherical aggregates. Non-viable organisms break, clot, or adversely discolour.

To determine if a patient has TB, sputum, or mucus, is frequently tested for Mycobacterium tuberculosis. Because this bacteria is fully acid-fast, the dye is retained throughout the entire cell. The patient has TB, according to a positive acid-fast smear test report.
Acid-fast bacteria are gramme-positive, but the exterior membrane or envelope of the acid-fast cell wall also includes significant quantities of glycolipids, particularly mycolic acids, which in the genus Mycobacterium account for about 60% of the acid-fast cell wall. These glycolipids, in addition to peptidoglycan, are known as glycolipids.
Examples of acid-fast bacteria include Mycobacterium tuberculosis (the cause of TB in people, which affects the lungs), Mycobacterium bovis, Mycobacterium avium, Nocardia species, and Rhodococcus equi.

To know more about microorganisms go through:-

https://brainly.com/question/342568

#SPJ4