The correct statement from the following is: d. The preemptive right is a provision in the corporate charter that gives common stockholders the right to purchase (on a pro rata basis) new issues of the firm's common stock.
What is a preemptive right?The preemptive right is the right of existing shareholders of a corporation to buy a proportionate share of any new stock issuance until the percentage of the shareholder's equity ownership is preserved.
Preemptive rights allow shareholders to maintain their relative interest in the corporation over time and avoid dilution of their ownership percentage.
Hence, option d. is correct.
To know more on right visit:
https://brainly.com/question/29412575
#SPJ11
It is very important for the Systems integration process to start before and continue during design activity–or anyone will end up redesigning needlessly."" Elaborate this theory in your own words by agreeing or disagreeing. Be firm in your reasoning.
Systems integration process is a complicated process, which is critical to carry out when developing a system. It is considered an important activity to start before and continue during design activity, or someone may end up redesigning needlessly.
According to the statement, systems integration should start before and continue during the design activity to ensure the system is well-structured, reliable, and meets the client’s expectations. .Moreover, it is essential to conduct systems integration in the early stages of the development process. This is because it will provide feedback that will influence the design and development of the system.
Therefore, system integration is crucial to ensure the final product is reliable, efficient, and meets the client's requirements.In conclusion, I agree with the statement that systems integration should start before and continue during design activity. Additionally, it results in the development of a robust and efficient system, which is fit for its intended purpose.
To know more about integration visit:
https://brainly.com/question/31744185
#SPJ11
Define and describe an example of the unequal distribution of the risks and benefits of technological change. Find resources that provide evidence of the differential outcomes. Based on what you understand about the causes of technological change, how are they connected, or not to the consequences of technologies?
How do monopolies affect this. Who benefits from more the consumer or the seller. Patents befits more or do trade secrets.
Technological change often leads to an unequal distribution of risks and benefits in society. The causes of technological change are complex and multi-dimensional and can have varying impacts on the distribution of benefits. Monopolies can also affect the distribution of benefits and risks, with the potential for adverse effects on consumers.
The unequal distribution of the risks and benefits of technological change is a crucial concern that is raised in many discourses of technological change. It refers to the distribution of the costs and gains of technological innovation in society. Inequality in the distribution of technological risks and benefits is a pervasive characteristic of technological change.
An example of this is the impact of the shift towards online shopping on small, independent retail stores. E-commerce firms such as Amazon have made it more convenient for customers to buy online, leading to the closure of many brick-and-mortar stores.
This has resulted in an unequal distribution of the benefits of technological change, with Amazon benefiting from increased sales and revenue while small independent stores face the risk of going out of business. Research shows that this outcome has caused negative outcomes for small retailers, workers, and local communities.
The causes of technological change are complex and multi-dimensional, with various factors contributing to technological innovation. One of the primary causes of technological change is economic forces, including investment in research and development and increased competition.
Technology policies and regulations, such as patents and intellectual property rights, also play a significant role in shaping the consequences of technological innovation. Societal factors, such as consumer preferences, cultural norms, and ethical considerations, also influence the direction and impact of technological change.
Monopolies can have an impact on the distribution of risks and benefits of technological change. Monopolies have the power to set prices, control supply, and demand, and stifle competition, which can result in adverse effects for consumers. In contrast, monopolies can benefit the company by increasing profits, market share, and revenue, allowing them to invest more in research and development.
In terms of patents and trade secrets, both have benefits for companies, but the extent of those benefits depends on the circumstances. Patents provide legal protection for an innovation, allowing companies to prevent others from producing or selling the product for a specific period, which can be beneficial for innovators.
Trade secrets can also be advantageous in certain situations because they provide a competitive advantage, allowing companies to keep valuable information confidential.
To learn more about the unequal distribution
https://brainly.com/question/12678342
#SPJ11
Rick's Sporting Goods is a wholesale distributor supplying a wide range of moderately priced sporting equipment to large chain stores. Rick's Sporting Goods has an enviable reputation for quality of its products. In fact, the demand for its products is so great that at times Rick's Sporting Goods cannot satisfy the demand and must delay or refuse some orders, in order to maintain its production quality. Additionally, Rick's Sporting Goods purchases some of its products from outside suppliers in order to meet the demand. These suppliers are carefully chosen so that their products maintain the quality image that Rick's Sporting Goods has attained.
About 60 percent of Rick's Sporting Goods' products are purchased from other companies while the remainder of the products are manufactured by Rick's Sporting Goods. The company has a Plastics Department that is currently manufacturing the boot for in-line skates. Rick's Sporting Goods is able to manufacture and sell 5,000 pairs of skates annually, making full use of its machine capacity at available workstations. Presented below are the selling price and costs associated with Rick's Sporting Goods' skates
Selling price per pair of skates $98
Costs per pair Molded plastic $8
Other direct materials 12
Machine time ($16/hr.) 24
Manufacturing overhead 18
Selling and admin. cost 15 77
Profit per pair $21
------
Because Rick's Sporting Goods believes it could sell 8,000 pairs of skates annually if it had sufficient
manufacturing capacity, the company has looked into the possibility of purchasing the skates for distribution.
Colcott Inc., a steady supplier of quality products, would be able to provide 6,000 pairs of skates per year at a price of $75 per pair delivered to Rick's Sporting Goods' facility.
Jack Potter, Rick's Sporting Goods' product manager, has suggested that the company could make better use of its Plastics Department by manufacturing snowboard bindings. To support his position, Potter has a market study that indicates an expanding market for snowboards and a need for additional suppliers. Potter believes that Rick's Sporting Goods could expect to sell 12,000 snowboard bindings annually at a price of $60 per binding. Potter's estimate of the costs to manufacture the bindings is presented below.
Selling price per snowboard binding $60
Costs per binding Molded plastic $16
Other direct materials 4 Machine time ($16/hr.) 8
Manufacturing overhead 6
Selling and admin. cost 14 48
Profit per binding $12
===
Other information pertinent to Rick's Sporting Goods' operations is presented below.
An allocated $6 fixed overhead cost per unit is included in the selling and administrative cost for all of the purchased and manufactured products. Total fixed and variable selling and administrative costs for the purchased skates would be $10 per pair.
In the Plastics Department, Rick's Sporting Goods uses machine hours as the application base for manufacturing overhead. Included in the manufacturing overhead for the current year is $30,000 of fixed, factory-wide manufacturing overhead that has been allocated to the Plastics Department.
*Company & Employee names have been changed.
==
REQUIRED:
1- To maximize Rick's Sporting Goods' profitability, recommend which product or products should be manufactured and/or purchased. 2- Prepare an analysis based on the data presented that will show the associated financial impact. Support your answer with appropriate calculations and strategic considerations. Please include other factors besides cost that Rick should take into consideration when making this decision.
To maximize Rick's Sporting Goods' profitability, it is recommended to consider both manufacturing and purchasing options.
For the skates, Rick's Sporting Goods should continue manufacturing them as it is currently utilizing its machine capacity and earning a profit of $21 per pair.
However, to meet the increased demand of 8,000 pairs annually, the company should also consider purchasing 2,000 pairs from Colcott Inc. at a cost of $75 per pair. This would allow Rick's Sporting Goods to meet the demand while maintaining profitability.
For the snowboard bindings, it is suggested to manufacture them as the profit per binding is $12, and there is a growing market for snowboards. By utilizing the Plastics Department to manufacture the bindings, Rick's Sporting Goods can tap into this expanding market and increase its profitability.
Financial Impact:
a. Skates:
Profit from manufacturing: 5,000 pairs x $21 = $105,000
Cost of purchasing from Colcott Inc.: 2,000 pairs x $75 = $150,000
Net impact: -$45,000
b. Snowboard Bindings:
Profit from manufacturing: 12,000 bindings x $12 = $144,000
Other Factors to Consider:
Besides cost, Rick's Sporting Goods should also consider factors such as quality control, production capacity, supplier reliability, customer demand, market trends, and the company's brand image.
By manufacturing some products in-house, Rick's Sporting Goods can maintain control over quality and ensure the products align with their reputation. Purchasing from reliable suppliers can help meet demand and expand product offerings.
It's crucial to strike a balance between cost-effectiveness, customer satisfaction, and maintaining a competitive edge in the market.
To learn more about profitability, visit here
https://brainly.com/question/31787267
#SPJ11
After examining years of data on hundreds of US equities, you discover the following relationship between the annual returns of 3 stocks, A,B, and C : RA=21RB+43RC−2001. What should the effective annual risk-free interest rate be? Why? (Hint: Find a risk-free portfolio of A,B, and C.) (b) (5 points) Let R1 and R2 be the annual return of two equities, and let μ1,μ2,σ12 and σ22 be the mean and variance of the returns. Find a relationship between R1 and R2 if the returns are perfectly correlated. Determine the annual risk-free interest rate. (Hint: Recall that two random variables R1 and R2 are perfectly correlated if and only if R1=a×R2+b, for some constants a>0 and b.)
To find the effective annual risk-free interest rate, we need to construct a risk-free portfolio of A, B, and C. Since we know the relationship between the returns of the three stocks, we can write the return of any portfolio as follows:Rp=wARa+wBRb+wCRcwhere wA,wB, and wC are the weights of A, B, and C, respectively.
To make this portfolio risk-free, we need to find weights that will eliminate all the risky components. We can do this by setting the coefficients of RB and RC to zero and solving for wA. This gives us:[tex]
wA=0.43/(0.21+0.43)=0.671wB=0.21/(0.21+0.43)=0.329wC=0[/tex]
Therefore, a risk-free portfolio is one that consists of 67.1% of stock A and 32.9% of stock B. The effective annual risk-free interest rate is the interest rate that would be earned on such a portfolio, which we can calculate using the following formula:[tex]
Rf=RawA+RbwB+RcwC=0.21(0.671)+0.43(0.329)=0.295 or 29.5%.[/tex]
Therefore, the effective annual risk-free interest rate should be 29.5%.Why? Because this is the interest rate that would be earned on a portfolio that eliminates all the risky components and consists of only stocks A and B. The weights of this portfolio are such that the returns of stocks B and C are completely eliminated, leaving only the return of stock A, which is risk-free.
To know more about respectively visit:
brainly.com/question/24282003
#SPJ11
Write two or three pages about the different aspects of Investment standard
Investment standard is a financial term that defines the established principles that investment advisors use to select, invest and monitor the securities they purchase for their clients.
The underlying purpose of these standards is to ensure that investment advisors act in the best interests of their clients. Investment advisors are responsible for following the standards of the investment advisory profession. These standards are established by various organizations and regulators that oversee the investment industry.
These standards apply to all investment advisors, regardless of the type of investment products they recommend. They are designed to protect clients from unscrupulous advisors who might recommend investments that are not appropriate for their clients. Investment advisors must follow these standards or risk losing their licenses to practice.
To know more about Investment visit:
https://brainly.com/question/17252319
#SPJ11
Considering the big picture in a layout design, differentiate between a good line design and a bad line design? 2. What is a good layout strategy where the inbound and outbound warehouse is combined? 3. What is a good layout strategy if the assembly line supplies or receives material from another production location? 4. What are the five questions that line managers need to consider in answering "How Much Material Has to Go to (or from) the Line"? 5. What are the line arrangements for an automated line, or when the operators are working?
1. Considering the big picture in a layout design, differentiate between a good line design and a bad line design: A good line design is one that maximizes production efficiency while minimizing the use of resources. A bad line design, on the other hand, results in bottlenecks, wasted space, and an inefficient flow of materials and products.
2. What is a good layout strategy where the inbound and outbound warehouse are combined? A good layout strategy where the inbound and outbound warehouse are combined is a straight-line layout.
3.If the assembly line supplies or receives material from another production location, then a U-shaped layout is a good layout strategy.4. What are the five questions that line managers need to consider in answering "How Much Material Has to Go to (or from) the Line"?
The five questions that line managers need to consider in answering "How Much Material Has to Go to (or from) the line design" are:5. What are the line arrangements for an automated line, or when the operators are working? For an automated line or when the operators are working, the line arrangements are product layout, group technology layout, and fixed-position layout.
To learn more about line design, visit here
https://brainly.com/question/19756140
#SPJ11
Current Attempt in Progress This information relates to Ayayai Real Estate Agency. Oct. 1 Stockholders invest $29,100 in exchange for common stock of the corporation. 2 Hires an administrative assistant at an annual salary of $30,000. 3 Buys office furniture for $3,610, on account. 6 Sells a house and lot for E.C. Roads; commissions due from Roads, $10,000 (no foaid by Roads at this time). 10 Receives cash of $130 as commission for acting as rental agent renting an apartment. 27 Pays $600 on account for the office furniture purchased on October 3. 30 Pays the administrative assistant $2.500 in salary for October. Joumalize the transactions. (If no entry is required, select "No entry" for the eccount titles ond enter Ofor the anounts. Credit account tities are cutomatically indented when omount is entered, Do not indent manailly. Record pumal entries in the order presented in the problem.
Ayayai Real Estate Agency's transactions for October are as follows:
1. Stockholders invest $29,100 in exchange for common stock.
2. Hires an administrative assistant with an annual salary of $30,000.
3. Purchases office furniture for $3,610 on account.
6. Sells a house and lot, earning commissions due from E.C. Roads amounting to $10,000.
10. Receives $130 in cash as a commission for acting as a rental agent.
27. Pays $600 on account for the office furniture purchased on October 3.
30. Pays the administrative assistant $2,500 in salary for October.
The journal entries for these transactions would be as follows:
Oct. 1:
Cash (or Accounts Receivable) 29,100
Common Stock 29,100
(To record stockholders' investment)
Oct. 2:
Salary Expense 2,500
Cash 2,500
(To record payment of salary to the administrative assistant)
Oct. 3:
Office Furniture 3,610
Accounts Payable 3,610
(To record the purchase of office furniture on account)
Oct. 6:
Accounts Receivable 10,000
Commission Revenue 10,000
(To record commissions earned from the sale to E.C. Roads)
Oct. 10:
Cash 130
Commission Revenue 130
(To record cash received for acting as a rental agent)
Oct. 27:
Accounts Payable 600
Cash 600
(To record payment on account for the office furniture)
Oct. 30:
Salary Expense 2,500
Cash 2,500
(To record payment of salary to the administrative assistant)
These journal entries capture the financial transactions of Ayayai Real Estate Agency for the month of October, ensuring accurate recording of revenues, expenses, and investments.
To know more about Stockholders, visit,
https://brainly.com/question/29705807
#SPJ11
Buzz Clothing Co, once the favorite of local teens, is considering lowering prices on all test sets w hers back after several years of sales declines BCC's total sales were $7 million last year, but they have declining in the face of a weak economy and an intensely competive retal environment Price redadors a effective in increasing sales, but marketers nood to analyze how much sales must go up before a price reduction pays off and increases revenue enough to make the tworth dong Assuming BCC's gross prott margin is 65 percent and cost of goods sold represents the only variable cost, by how much must sales increase to mantain the same gr profit margin in terms of absolute dollars if BCC lowers prices by 5 perces? Hint The Francial Analyses of Mabing Tactics section in Appendix 3 of your textbook includes information to help you ansze a decision to decrease price
The current gross profit is 5 mios (Round to two decimal places)
Sales must increase by approximately $0.69 million to maintain the same gross profit margin in absolute dollars if BCC lowers prices by 5%.
To calculate how much sales must increase to maintain the same gross profit margin in absolute dollars, we need to consider the impact of lowering prices by 5% on the gross profit.
Given:
Current gross profit: $5 million.
Gross profit margin: 65%.
Price reduction: 5%.
Step 1: Calculate the current cost of goods sold (COGS):
COGS = Gross profit / Gross profit margin
COGS = $5 million / 0.65
COGS ≈ $7.69 million
Step 2: Calculate the new gross profit margin after the price reduction:
New gross profit margin = Gross profit margin = 65%
Step 3: Calculate the new target gross profit:
New target gross profit = Current gross profit = $5 million
Step 4: Calculate the new target cost of goods sold (COGS):
New target COGS = New target gross profit / New gross profit margin
New target COGS = $5 million / 0.65
New target COGS ≈ $7.69 million
Step 5: Calculate the required sales increase to maintain the same gross profit margin:
Required sales increase = New target COGS - Current COGS
Required sales increase = $7.69 million - $7 million
Required sales increase ≈ $0.69 million
Therefore, sales must increase by approximately $0.69 million to maintain the same gross profit margin in terms of absolute dollars if BCC lowers prices by 5%.
To know more about the gross profit margin click here:
https://brainly.com/question/16999019
#SPJ11
The America Dog and Cat Hotel is a pet hotel located in Las Vegas. Assume that in March, when dog-days (occupancy) were at an annual low of 500, the average cost per dog-day was $14. In July, when dog-days were at a capacity level of 4,000, the average cost per dog-day was $7.
(a) Develop an equation for monthly operating costs. (Let X = dog-days per month)
Total cost =Answer
+ Answer
* X
(b) Determine the average cost per dog-day at an annual volume of 24,000 dog-days.
a) Monthly operating costs for the America Dog and Cat Hotel is given below:
Total cost = Fixed Cost + Variable Cost * X
Given:
When dog-days occupancy were at an annual low of 500, the average cost per dog-day was $14.
Then, the total cost for that month can be given as, 500 * $14 = $7,000
When dog-days occupancy were at a capacity level of 4,000, the average cost per dog-day was $7.Then, the total cost for that month can be given as, 4,000 * $7 = $28,000
Now, we can use the above two values to find out the fixed and variable costs.
Monthly Fixed Cost = Total Cost - (X * Variable Cost)When X = 500, Total Cost = $7,000, Variable Cost = $14
Fixed Cost = $7,000 - (500 * $14) = $-1,000
When X = 4000, Total Cost = $28,000, Variable Cost = $7Fixed Cost = $28,000 - (4,000 * $7) = $0
Now, we can put the above values in the formula of Monthly operating costs.
Total cost = Fixed Cost + Variable Cost * XTotal cost = $0 + $7 * X
Total cost = $7XMonthly operating costs equation is:
Total cost = $7X. (Ans: $7X) b)
We are given that at an annual volume of 24,000 dog-days,
we have to find the average cost per dog-day.
Annual volume = 24,000 dog-days
Monthly volume = 24,000/12 = 2,000 dog-days
Using the formula of monthly operating costs, we can find the average cost per dog-day.
Total cost = $7X, X = 2,000 dog-daysTotal cost = $7 * 2,000 = $14,000
======================
Average cost per dog-day = Total cost/Number of dog-days
Average cost per dog-day = $14,000/24,000
Average cost per dog-day = $0.58333
The average cost per dog-day at an annual volume of 24,000 dog-days is $0.58333. (Ans: $0.58333)
To know more about operating visit :
https://brainly.com/question/30581198
#SPJ11
Analyse the effective of backward intergration. Provide examples to substantiate your response.
Backward integration refers to the process of a company expanding its operations to encompass its suppliers of raw materials. A firm that undertakes backward integration buys or creates businesses that supply the products or services that the company uses.
This is done to control costs, improve efficiency, and increase profits. It has been shown to be an effective strategy for companies seeking to gain a competitive advantage.
The following are some examples of successful backward integration: Apple Inc.Apple is a company that has succeeded in backward integration. In order to safeguard its supply chain, the tech giant has been actively working on backward integration.
Apple has been investing in the development of its processors to reduce dependence on external suppliers, as well as developing its proprietary application processors. Apple Inc.'s move to design its processors and manufacture them through TSMC is a backward integration strategy that has been successful. Walmart- Walmart, one of the largest retailers in the world, is another example of backward integration.
Walmart's strategy involves creating a single channel of distribution for goods. Walmart has been actively working on backward integration by purchasing its suppliers. It has achieved this by purchasing the rights to the products of its suppliers. In order to maintain quality control and guarantee that its products meet its standards, the company has taken the necessary steps.PepsiCoPepsiCo is a beverage and snack food company that is well-known for its backward integration strategy.
PepsiCo has achieved backward integration by owning some of its key suppliers. For instance, Frito-Lay is a subsidiary of PepsiCo. The company supplies a significant percentage of the raw materials used in the production of PepsiCo's snacks. PepsiCo has been able to guarantee the quality of its products and achieve better supply chain management as a result of its backward integration strategy.
To learn more about Backward integration, visit:
https://brainly.com/question/32631693
#SPJ11
If GDP is \( \$ 30 \) trillion, how many years will it take for GDP to Increase to \( \$ 240 \) trillion If annual growth is 14 percent? Instructlons: Enter your answer as a whole number. years
It will take 16 years for the GDP to increase to $240 trillion with an annual growth rate of 14 percent.
How many years will it take for GDP to increase to $240 trillion if annual growth is 14 percent?To calculate the number of years it will take for the GDP to increase to $240 trillion, we can use the formula for compound interest: FV=PV×(1+r)^n
Given data:
PV = $30 trillion
FV = $240 trillion
r = 0.14
Plugging values:
$240 trillion = $30 trillion × (1 + 0.14)^n
8 = (1.14)^n
Taking logarithm of both sides using the base 1.14:
log(8) = log((1.14)^n)
log(8) = n × log(1.14)
n = log(8) / log(1.14)
n = 15.87.
Read more about GDP increase
brainly.com/question/31199521
#SPJ4
A financial reporter commenting on benchmark rates stated that: "the risk-free LIBOR will be abolished and replaced by risk-free OIS rates." Critique the reporter’s statement.
Could everyone do this and write a paragraph with citation and references.
The critique of the reporter's statement is that it is not entirely accurate. While it is true that the London Interbank Offered Rate (LIBOR) is being phased out, it is not accurate to say that it will be replaced by risk-free Overnight Indexed Swap (OIS) rates.
OIS rates are indeed risk-free rates, but they are not a direct replacement for LIBOR. Instead, various alternative reference rates are being developed and recommended, such as the Secured Overnight Financing Rate (SOFR) in the United States and the Sterling Overnight Index Average (SONIA) in the United Kingdom. These rates are based on actual transactions in the respective markets, making them more robust and representative of the underlying market conditions. To summarize, the reporter's statement is inaccurate as it suggests that OIS rates will directly replace LIBOR, when in fact, alternative reference rates like SOFR and SONIA are being recommended as replacements.
Learn more about the Swap (OIS) rates:
https://brainly.com/question/33495035
#SPJ11
Revenues generated by a new fad product are forecast as follows: Expenses are expected to be 50% of revenues, and working capital required in each year is expected to be 20% of revenues in the following year. The product requires an immedlate investment of $48,000 in plant and equipment. Required: a. What is the Initial investment in the product? Remember working capital. b. If the plant and equipment are depreclated over 4 years to a salvage value of zero using stralght-line depreclation. and the firm's tax rate is 40%, what are the project cash flows in each year? c. If the opportunity cost of capital is 15%, what is project NPV? d. What is project IRR? Complete this question by entering your answers in the tabs below. What is the initial investment in the product? Remember working capital.
Revenues generated by a new fad product are forecast as follows: Expenses are expected to be 50% of revenues, and working capital required in each year is expected to be 20% of revenues in the following year.
How to find?The product requires an immediate investment of $48,000 in plant and equipment. The question requires us to determine the initial investment in the product.
So, the formula for calculating the initial investment is;
Initial investment = Investment in fixed assets + Net working capital (NWC)where Net Working Capital is the difference between current assets and current liabilities.
Now, let's find out the initial investment.
Investment in fixed assets= $48,000
Net working capital in year 0 (NWC0)= 20% of revenue in year 1
= 0.20 × $0
= $0.
Initial investment = $48,000 + $0
= $48,000.
The initial investment in the product is $48,000.
To know more on investment visit:
https://brainly.com/question/15105766
#SPJ11
Problem 5-9 Calculating Annuity Values [LO 1] Assume you deposit $4,500 at the end of each year into an account paying 10.75 percent interest. a. How much money will you have in the account in 25 years? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. How much will you have if you make deposits for 50 years? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.
Future value of annuity in 25 years is $340,269.25. Future value of annuity in 50 years is $2,533,617.39.
Problem 5-9 Calculating Annuity Values [LO 1]
The given details are:Amount Deposited at the end of every year = $4,500
Interest rate = 10.75%
a. How much money will you have in the account in 25 years?
Let's first find the Future value of annuity in 25 years.
Future value = Payment * [(1 + i)n - 1] / i
where,
P = $4,500
i = 10.75% / 100
= 0.1075
n = 25 years
Therefore, the Future value of annuity in 25 years = $340,269.25
b. How much will you have if you make deposits for 50 years?
Let's first find the Future value of annuity in 50 years.
Future value = Payment * [(1 + i)n - 1] / i
where,
P = $4,500
i = 10.75% / 100
= 0.1075
n = 50 years
Therefore, the Future value of annuity in 50 years = $2,533,617.39
Know more about the Future value
https://brainly.com/question/27979326
#SPJ11
What is Leaky Pipe’s optimal order quantity (i.e. EOQ)?
b. What is the optimal number of orders per year?
c. What is the optimal interval (in working days) between orders?
d. What is demand during the lead time?
e. What is the reorder point?
f. What is the inventory position immediately after an order has been placed?
g. What is the total annual cost of the inventory?
Answer:
Leaky Pipe’s optimal order quantity (i.e. EOQ):
The optimal order quantity for Leaky Pipe would be at the point where the carrying costs and ordering costs intersect. Mathematically, it would be at the square root of [(2SD) / H].
Here, S represents the annual demand, D represents the cost to place one order and H represents the annual holding cost per unit of inventory. For Leaky Pipe, this would be √[(2 x 3500 x 1) / 20] = 29.53. Hence, the optimal order quantity for Leaky Pipe would be 30 units.
Optimal number of orders per year: The optimal number of orders per year can be calculated by dividing the annual demand by the EOQ. Hence, for Leaky Pipe, the optimal number of orders per year would be 3500 / 30 = 116.67.
Since a fraction of an order cannot be placed, this would be rounded up to 117. Optimal interval (in working days) between orders: The optimal interval can be calculated by dividing the number of working days in a year by the optimal number of orders per year. Hence, for Leaky Pipe, the optimal interval would be 250 / 117 = 2.14 or 3 working days. Demand during the lead time: The demand during the lead time is 300 units.
This is the total demand during the time period between placing an order and receiving it.
Reorder point: The reorder point can be calculated by multiplying the demand during lead time by the number of days in the lead time and adding the safety stock. Hence, for Leaky Pipe, the reorder point would be (300 x 7) + 150 = 2250.
Inventory position immediately after an order has been placed: The inventory position immediately after an order has been placed would be zero since all inventory would have been exhausted prior to the order being placed.
Total annual cost of the inventory: The total annual cost of the inventory would be the sum of the annual holding cost and the annual ordering cost. Hence, for Leaky Pipe, this would be (20 x 30 / 2) + (3500 / 30) = $1173.33.
To know more about quantity visit :
https://brainly.com/question/14581760
#SPJ11
EX6-7 (Algo) The project information for the... The project information for the custom order project of the Air Control Company is presented here. Compute the early late activity times and slack times. Identify the critical path. How many days will the project take? × Answer is not complete.
Given the following project information for the custom order project of the Air Control Company, the early late activity times and slack times will be computed. Critical path will be identified and the number of days the project will take will be determined.
Late Start (LS): The latest time a task can start without delaying the finish time of the overall project. Late Finish (LF): The latest time a task can finish without delaying the finish time of the overall project. Slack Time: The maximum amount of time an activity can be delayed without delaying the project. Computation of Early Start (ES), Early Finish (EF), Late Start (LS), Late Finish (LF),
LF for C = LS for C + Normal time for C = 28 + 8 = 36. LS for B = LF for D - Normal time for B = 30 - 4 = 26. LF for B = LS for B + Normal time for B = 26 + 6 = 32. LS for A = EF for B - Normal time for A = 32 - 6 = 26. LF for A = LS for A + Normal time for A = 26 + 5 = 31. Computation of Slack Time (SL) SL for A = LS for A - ES for A = 26 - 26 = 0. SL for B = LS for B - ES for B = 26 - 5 = 21. SL for C = LS for C - ES for C = 28 - 5 = 23. SL for D = LS for D - ES for D = 26 - 11 = 15. SL for E = LS for E - ES for E = 28 - 13 = 15. SL for F = LS for F - ES for F = 26 - 15 = 11. SL for G = LS for G - ES for G = 0. The critical path in the network is A-B-D-F-G, with a project duration of 30 days.
To know more about project visit:
https://brainly.com/question/28476409
#SPJ11
1.Taxes can induce the optimal quantity of a good that has a negative externality
( ) True
( ) False
2. Because fans do not pay the de jure incidence of a tax on concessions, they will not be negatively effected by this tax.
( ) True
( ) False
3. Suppose the marginal propesnsity to consume is .8 and the marginal propensity to import is .2. Suppose a stadium renovation increased revenue by $6,000,000,000. What would the total benefit of this construction be for the city?
4. Suppose the marginal propesnsity to save is .1 and the marginal propensity to import is .2. Suppose a stadium renovation increased revenue by $6,000,000,000. What would the total benefit of this construction be for the city?
1. True
2. False
3. The total benefit of the stadium construction for the city would be $4,800,000,000.
4. The total benefit of the stadium construction for the city would be $600,000,000.
1. True: Taxes can be used to internalize negative externalities by increasing the cost of producing or consuming goods that generate negative spillover effects.
By raising the price of such goods, taxes can reduce their consumption and lead to the optimal quantity that accounts for the negative externality.
2. False: The incidence of a tax refers to who bears the burden of the tax. While fans may not pay the tax directly on concessions, they can still be negatively affected by it indirectly.
The tax may result in higher prices for concessions, which can impact fans' purchasing decisions and overall experience at the stadium.
3. To calculate the total benefit of the stadium renovation for the city, we need to consider the marginal propensity to consume (MPC) and the change in income.
Given:
MPC = 0.8
Change in income = $6,000,000,000
Total Benefit = MPC * Change in Income
Total Benefit = 0.8 * $6,000,000,000
Total Benefit = $4,800,000,000
Therefore, the total benefit of the construction for the city would be $4,800,000,000.
4. To calculate the total benefit of the stadium renovation for the city, we need to consider the marginal propensity to save (MPS) and the change in income.
Given:
MPS = 0.1
Change in income = $6,000,000,000
Total Benefit = MPS * Change in Income
Total Benefit = 0.1 * $6,000,000,000
Total Benefit = $600,000,000
Therefore, the total benefit of the construction for the city would be $600,000,000.
Know more about the marginal propensity to save (MPS) click here:
https://brainly.com/question/32247892
#SPJ11
Review the "100:10:3:1 Rule," which is described in Chapter 10 of your text, and discuss its relevance today. Given the technology and current search methods, discuss whether you think this rule is as relevant today as it has been in the past. Your initial post should be 200 to 250 words. Be sure to respond to at least two of your classmates’ posts.
The 100:10:3:1 Rule, described in Chapter 10 of your text, is a rule that describes the following ratios of people's engagement in online communities.
What is the relevance of this rule ?This rule is still relevant today because it is a helpful guideline for understanding the level of engagement that can be expected in an online community. Although it is not a hard and fast rule, it provides a general idea of what to expect in terms of user engagement and content creation. Even with the advancements in technology and current search methods, the rule remains relevant because it is based on human behavior and tendencies. People are still more likely to consume content than to create it, and a small percentage of people will be responsible for the majority of the contributions to a community site.
However, it is important to note that the rule may not apply to all online communities and platforms.
Some platforms may have higher levels of user engagement and content creation than others, and the rule should be taken as a general guideline rather than a strict rule.
However, it should be taken as a general rule rather than a strict guideline, and it may need to be adjusted to account for changes in technology and social media platforms.
To know more on social media visit:
https://brainly.com/question/30194441
#SPJ11
At least one of the answers above is NOT correct. Let f(x)=4−(2x 2
+3x) a. Compute f(3) f(3)= b. Simplify the following expression completely f(x+3) f(x+3)= c. Simplify the following expression completely f(x+3)−f(3). f(x+3)−f(3)= d. Simplify the following expression completely x
f(x+3)−f(3)
. x
f(x+3)−f(3)
= Note: You can earn partial credit on this problem.
a. The value of f(3) can be calculated by substituting the value of x = 3 in the given function. The calculation is shown below: f(x) = 4 - (2x^2 + 3x)f(3) = 4 - (2(3)^2 + 3(3)) = 4 - (2(9) + 9) = 4 - (18 + 9) = 4 - 27 = -23Therefore, f(3) = -23.
b. The function f(x+3) can be computed by replacing the variable x with (x+3) in the function expression for f(x).f(x) = 4 - (2x^2 + 3x) f(x+3) = 4 - (2(x+3)^2 + 3(x+3))f(x+3) = 4 - (2(x^2 + 6x + 9) + 3x + 9)f(x+3) = 4 - (2x^2 + 12x + 18 + 3x + 9)f(x+3) = 4 - (2x^2 + 15x + 27)Therefore, f(x+3) = -2x^2 + 15x - 23.
c. We can simplify the given expression by using the function expression computed above. f(x+3) - f(3) = (-2x^2 + 15x - 23) - (-23) = -2x^2 + 15xTherefore, f(x+3) - f(3) = -2x^2 + 15x.
d. We can simplify the given expression using the previously computed function expressions. x[f(x+3) - f(3)] = x(-2x^2 + 15x) = -2x^3 + 15x^2Therefore, x[f(x+3) - f(3)] = -2x^3 + 15x^2.
To know more about substituting the value refer here : brainly.com/question/31009321
#SPJ11
In the quarterly report for the quarter ended on July 29, 2022 (total working days 65 days), the following are from the Dell Computer's financial report (in millions) for products (not including services):
Net revenue (products) $ 20,810
Cost of net revenue (products) 17,671
Accounts receivable 13,431
Accounts payable 25,339
Inventory 5,883
Calculate the cash-to-cash cycle time for Dell.
The cash-to-cash cycle time will be approximately -29.68 days.
To calculate the cash-to-cash cycle time for Dell, we need to consider the following components:
Days Inventory Outstanding (DIO): This represents the average number of days it takes for Dell to sell its inventory.
DIO = (Inventory / Cost of Net Revenue) × Number of Days in the Quarter
DIO = (5,883 / 17,671) ×× 65 = 21.62 days
Days Sales Outstanding (DSO): This represents the average number of days it takes for Dell to collect payment from its customers.
DSO = (Accounts Receivable / Net Revenue) × Number of Days in the Quarter
DSO = (13,431 / 20,810) × 65 = 41.95 days
Days Payable Outstanding (DPO): This represents the average number of days it takes for Dell to pay its suppliers.
DPO = (Accounts Payable / Cost of Net Revenue) × Number of Days in the Quarter
DPO = (25,339 / 17,671) × 65 = 93.25 days
Now, we can calculate the cash-to-cash cycle time using the formula:
Cash-to-Cash Cycle Time = DIO + DSO - DPO
Cash-to-Cash Cycle Time = 21.62 + 41.95 - 93.25
= -29.68 days
The negative result indicates that Dell's cash inflows (from collecting accounts receivable) occur before its cash outflows (to pay accounts payable and purchase inventory), resulting in a negative cash cycle time.
To know more about cash inflows here
https://brainly.com/question/10714011
#SPJ4
Describe the Characteristics of Integrated brand communication Management in terms of
1: Management focused on communication
2: Brand management at the level of corporate strategy rather then at the level of marketing
3: Management that captures emotions
The characteristics of Integrated Brand Communication Management in terms of management focused on communication, brand management at the level of corporate strategy rather than at the level of marketing, and management that captures emotions are discussed below.
1. Management focused on communication: Integrated Brand Communication Management focuses on communication, and the management is responsible for all forms of communication within the company. The goal of this management is to ensure that all communication within the company is consistent and effectively communicates the brand message.
2. Brand management at the level of corporate strategy rather than at the level of marketing: Integrated Brand Communication Management is a holistic approach that focuses on the brand's identity, image, and personality at the corporate level rather than the marketing level. This management is responsible for developing a comprehensive strategy that aligns with the company's vision, mission, and values.
3. Management that captures emotions: Integrated Brand Communication Management is about capturing emotions, and the management is responsible for creating a unique brand experience that resonates with the target audience. The goal of this management is to create an emotional connection between the brand and its customers, which will lead to long-term customer loyalty and advocacy.
In conclusion, Integrated Brand Communication Management is an approach that focuses on creating a consistent and effective message that resonates with the target audience. This management is responsible for communication within the company, brand management at the corporate level, and capturing emotions.
To learn more about Communication Management, here:
https://brainly.com/question/30914597
#SPJ11
Talk about the digital economy, digital enterprise, and digital society as the three main components of the digital world. then particularly go over what the term "digital enterprise" means, what makes it unique from brick and mortar businesses, etc. How, for instance, has Amazon been driving the digital transformation?
Amazon's digital enterprise model has disrupted traditional retail, redefined supply chains, and set new standards for digital business operations, making it a driving force in digital transformation.
The digital economy, digital enterprise, and digital society are three interconnected components that form the digital world. The digital economy refers to the economic activities driven by digital technologies, including online transactions, e-commerce, and digital services. It encompasses the exchange of goods, services, and information in a digital format.
A digital enterprise is a business that leverages digital technologies to enhance its operations, customer interactions, and overall performance. Unlike traditional brick-and-mortar businesses, digital enterprises primarily operate online, utilizing internet platforms, cloud computing, data analytics, and automation. They have a global reach, low overhead costs, and the ability to scale rapidly.
Amazon is a prime example of a company driving the digital transformation. Through its e-commerce platform, Amazon revolutionized the retail industry, enabling customers to purchase a vast range of products online. It introduced innovations like one-click ordering, personalized recommendations, and fast delivery services, reshaping consumer expectations.
To learn more about the enterprise model
https://brainly.com/question/31546209
#SPJ11
You are the audit committee chair for a large construction company. A year ago you purchased a development company in Europe for approximately $100 million. This company has already lined up a number of large projects in Italy, Germany, and other European countries that take advantage of government incentives and subsidies. You just received a tip (not anonymous} from a female attorney working for the European subsidiary who alleges that the CEO of the European subsidiary is paying bribes to key governmental officials to get favorable treatment on major projects. The tip is quite specific in that it names (1) the government officials who have been paid bribes, (2) the nature of the payments (they have been labeled consulting fees but you have been told they lack any legitimate documentation), and {3) the amounts that have been paid. Answer the following questions regarding this tip.
I. Which law(s) are you concerned that the company may be violating and what are the consequences of violating this (these) law(s}?
2. As audit committee chair, what action should you take to investigate the tip?
3. If you find through whatever initiatives you take that the allegations are true, what should you do and what are the pros and cons of self-reporting of the government?
The situation raises concerns about potential violations of anti-bribery laws, particularly the FCPA. As the audit committee chair, it is crucial to initiate an investigation, gather evidence, etc.
The laws that may be of concern in this situation are the Foreign Corrupt Practices Act (FCPA) in the United States and potentially anti-bribery laws in the countries where the bribes are being paid, such as Italy and Germany. The FCPA prohibits the bribery of foreign officials for the purpose of obtaining or retaining business. Violating the FCPA can lead to severe consequences, including criminal and civil penalties for both the individuals involved and the company, such as substantial fines, imprisonment, and reputational damage.
As the audit committee chair, it is your responsibility to take the tip seriously and initiate a thorough investigation. The first step would be to gather relevant information and evidence, including any available documents or testimonies related to the alleged bribes. It would be prudent to engage a reputable external investigator or legal counsel experienced in handling such matters to ensure an impartial and comprehensive investigation.
If the investigation confirms the validity of the allegations, it is essential to take appropriate action. The pros and cons of self-reporting to the government should be carefully evaluated. Pros of self-reporting include demonstrating the company's commitment to ethical conduct, potential leniency in penalties if the company cooperates fully, and the possibility of mitigating reputational damage. Cons may include potential fines, legal proceedings, and the negative impact on the company's image and business relationships. The decision to self-report should be made after weighing the legal and ethical obligations, potential consequences, and guidance from legal counsel.
Learn more about FCPA here:
https://brainly.com/question/30626255
#SPJ11
TRUE / FALSE. The average inventory level is inversely related to order size
Answer:
False.
Explanation:
The average inventory level and order size are not always inversely related. It depends on factors like demand patterns, lead time, and replenishment policies. A larger order size can increase average inventory when demand is stable, reducing stockouts. However, in unpredictable or fluctuating demand, larger orders can lead to lower inventory levels. Thus, the relationship is context-dependent, not strictly inverse.
In our course activity, we discuss the terms and concepts used to diagnose, explain, predict and modify group behavior. During that activity we studied REB. REB stands for..
A. Reaction-Emotion-Behavior
B. Real, effective beings
C. Rational-Emotive-Behavior
D. The Rebel Model
In our course activity, we discussed the terms and concepts used to diagnose, explain, predict, and modify group behavior. During the activity, we studied REB, which stands for Rational-Emotive-Behavior.REB stands for Rational-Emotive-Behavior.
It is a cognitive behavioral approach that focuses on changing an individual's irrational beliefs to reduce maladaptive behaviors and emotional responses. REB recognizes the importance of both rational and irrational thoughts, and it aims to develop rational beliefs through the ABC model of behavior change.
Group members are encouraged to challenge their irrational beliefs and replace them with rational beliefs, which helps to reduce emotional distress and improve their interpersonal relationships.In conclusion, REB is a valuable approach to understand and modify group behavior, which is why it was studied in the course activity. It helps individuals to identify irrational beliefs and replace them with rational beliefs that lead to adaptive behaviors and emotions.
To know more about REB visit:
https://brainly.com/question/32651791
#SPJ11
Ms. Frangipani prefers Pepsi over Coke on a rainy day; Coke over Pepsi on a sunny one. On one sunny day at the CNN center in Atlanta, when faced with a choice between Pepsi, Coke and Lipton iced tea, she decides to have a Pepsi. Should the presence of iced teas in the basket of choices affect her decision? Does she violate principles of utility maximization? If yes, which assumptions does she violate? If not, then argue how her choices are consistent with the utility theory
While her decision may not strictly adhere to utility maximization, it remains consistent with the overall framework of utility theory.
According to the principle of utility maximization, individuals choose the option that provides them with the highest level of satisfaction or utility. In the case of Ms. Frangipani, her choice of drinks is influenced by the weather. Specifically, she prefers Pepsi on rainy days and Coke on sunny days.
When faced with three options (Pepsi, Coke, and Lipton iced tea) on a sunny day, Ms. Frangipani chose Pepsi. The presence of iced teas in the choices should not affect her decision because she already knows her preference and what brings her enjoyment.
However, Ms. Frangipani violates the principle of utility maximization by choosing Pepsi over Coke on a sunny day. According to utility maximization, she should select the option that provides her with the maximum satisfaction or utility. If she indeed prefers Coke on sunny days, she should choose Coke over Pepsi, even if she generally likes Pepsi more.
Nevertheless, despite violating the principle of utility maximization, Ms. Frangipani's choices are consistent with the utility theory. She is still maximizing her satisfaction or utility based on her established preferences. Her choices align with her subjective preferences, which may be influenced by factors such as personal taste or associations with certain drinks on specific weather days.
Therefore, while her decision may not strictly adhere to utility maximization, it remains consistent with the overall framework of utility theory.
Learn more about utility maximization
https://brainly.com/question/32296953
#SPJ11
A trader at the brokerage firm FastEx receives an order to purchase 2,000 shares of stock XYZ. At the time the order was received the market price of XYZ (i.e., the midpoint of the best bid and ask quotes) was $50.00. The trader then proceeds to execute the order. Initially the trader is able to purchase 1,000 shares at $50.50. Due to lack of liquidity the trader waits until the following day to execute an additional 800 shares at $51.00. Because t1 .ice has risen the trader decides not to purchase any more shares. Five days later (t=7) the stock closes at $52. FastEx charges brokerage of $0.08 per share, What is the Implementation shortfall cost ($)? Select one: a. 1840 b. 1696 C. 1440 d. 1844
The implementation shortfall cost is the difference between the price the trader paid for the shares and the final closing price of the stock.The answer is not given in the options .
To calculate this cost, we need to consider the prices at which the trader purchased the shares and the brokerage fee.First, the trader purchased 1,000 shares at $50.50. This means the total cost of this purchase is 1,000 * $50.50 = $50,500.Next, the trader purchased an additional 800 shares at $51.00. This means the total cost of this purchase is 800 * $51.00 = $40,800.
Adding these two costs together, we get a total cost of $50,500 + $40,800 = $91,300.The trader also incurred a brokerage fee of $0.08 per share. So the total brokerage fee is (1,000 + 800) * $0.08 = $176.
To calculate the implementation shortfall cost, we subtract the total cost of the shares and the brokerage fee from the final closing price of the stock. The closing price is given as $52.00.Implementation shortfall cost = ($91,300 + $176) - ($52.00 * 2,000)= $91,476 - $104,000= -$12,524.Therefore, the implementation shortfall cost is -$12,524.
To know more about shortfall cost, refer to the link:
https://brainly.com/question/27332595#
#SPJ11
Define the minimum viable business product for a technology-based platform solution that lets university students in Bangladesh borrow from and lend to each other (peer-to-peer lending business model).
The Minimum Viable Business Product for a technology-based platform solution that allows University students in Bangladesh to borrow from and lend to each other in a Peer-to-Peer (P2P) lending business model must be formulated in a way that addresses the unique needs of the target audience.
This means that the product must be carefully tailored to the needs of students in the University, taking into consideration factors such as the current economic situation, financial literacy, technological awareness, and competition from existing P2P lending solutions.
The minimum viable product (MVP) for this technology-based platform solution should have the following features:
1. User-Friendly: The platform must be simple and intuitive to use, so that students can easily navigate through the platform and understand how it works. This means that the user interface must be visually appealing, easy to understand and the processes involved must be simple.
2. Secure: Security is of utmost importance in any P2P lending platform. The platform must be designed with a robust security system that protects the users' personal and financial data from being compromised.
3. Affordable: The platform must be affordable to use, with reasonable fees that are competitive compared to other P2P lending platforms.
4. Efficient: The platform must have a seamless, fast and efficient transaction process that ensures borrowers and lenders receive funds on time, with no unnecessary delays.
By taking into consideration the unique needs of the students in the University, the platform can be designed to meet their needs, and provide them with a secure, affordable, and efficient P2P lending solution.
To know more about Peer-to-Peer visit :
https://brainly.com/question/28936144
#SPJ11
The Year 2 fiscal year-end financial statements for Walter Co. report revenues of $54,519 million, net operating profit after tax of $9,954 million, net operating assets of $57,431 million. The Year 1 fiscal year-end balance sheet reports net operating assets of $57,897 million. Walter's Year 2 net operating profit margin is: Select one: a. 11.5% b. There is not enough information to calculate the ratio. c. 17.2% d. 18.3% e. 17.3%
The correct calculation of the net operating profit margin for Walter Co. in Year 2 is approximately 18.3%. Here option D is the correct answer.
To calculate the net operating profit margin, we need to divide the net operating profit after tax by the revenues and multiply by 100 to express it as a percentage. The formula for net operating profit margin is:
Net Operating Profit Margin = (Net Operating Profit After Tax / Revenues) * 100
Given the information provided:
Revenues = $54,519 million
Net Operating Profit After Tax = $9,954 million
Using the formula, we can calculate the net operating profit margin:
Net Operating Profit Margin = ($9,954 million / $54,519 million) * 100
= 18.26%
Therefore, the net operating profit margin for Walter Co. in Year 2 is approximately 18.3%. Therefore option D is the correct answer.
To learn more about profit margin
https://brainly.com/question/28180283
#SPJ11
ConsiderConsider a world with two goods and two countries with the productivity (output per month) as indicated in the table below. - 1. Calculate opportunity costs of each good for both countries - 2. According to absolute advantage, which country should product computers? - 3. According to comparative advantage, which country should produce Tshirts? - 4. If the world price of a computer is equal to 0.6t-shirt and the world price of a t-shirt is equal to 1 computer, calculate the real wage that workers in the Home country earn after trade. Calculate the real wage that workers in the Foreign country earn after trade. - 5. Which countries workers earn more real wage after trade? Explain why.
1) Country A's opportunity cost of a computer = 1/3, Country A's opportunity cost of a T-shirt = 3, Country B's opportunity cost of a computer = 1/5, Country B's opportunity cost of a T-shirt = 5.
2) Country A should produce computers, Country B should produce T-shirts.
3) Real wage in the Home country after trade = 1.5 T-shirts/hour, Real wage in the Foreign country after trade = 3 computers/hour.
4) Workers in the Home country earn a higher real wage after trade, while workers in the Foreign country earn a lower real wage.
Consider a world with two goods and two countries with the productivity (output per month) as indicated in the table below. To answer the given question, here are the steps:
1. Calculate the opportunity costs of each good for both countries:
Country A's opportunity cost of a computer = 20/60 = 1/3
Country A's opportunity cost of a T-shirt = 60/20 = 3
Country B's opportunity cost of a computer = 10/50 = 1/5
Country B's opportunity cost of a T-shirt = 50/10 = 5
Country A should produce computers as it has a higher output for computers compared to country B.
2. Country B should produce T-shirts as it has a lower opportunity cost for producing T-shirts compared to country A.
3. If the world price of a computer is equal to 0.6 T-shirt and the world price of a T-shirt is equal to 1 computer, calculate the real wage that workers in the Home country earn after trade. Calculate the real wage that workers in the Foreign country earn after trade.
World price of a computer = 0.6 T-shirt
World price of a T-shirt = 1 computer
In the home country, the real wage after trade = 1.5 T-shirts/hour
In the foreign country, the real wage after trade = 3 computers/hour
4. In the home country, the workers earn a higher real wage after trade since the world price of computers is lower than the price they had before trade, and they get to import goods cheaply. Meanwhile, the workers in the foreign country earn a lower real wage as compared to the home country as the world price of computers is higher than before trade, and they have to export goods cheaply. Thus, workers in the home country earn higher real wages after trade.
Lear more about computers
https://brainly.com/question/32297640
#SPJ11