The electronic system used by the NYSE for directly transmitting orders to designated market makers is the Pillar system (option A).
The Pillar system is an electronic trading platform used by the New York Stock Exchange (NYSE) that enables direct transmission of orders from traders to designated market makers. The system is designed to improve speed, reliability, and efficiency of trading by automating the process of order routing and execution.
The Pillar system replaces the NYSE's previous trading platform, the NYSE Classic, and was introduced in 2017 as part of the exchange's efforts to modernize and streamline its operations. The system is intended to provide a more seamless and integrated trading experience for market participants.
Option A is the correct answer.
You can learn more about Pillar system at
https://brainly.com/question/20372288
#SPJ11
what is the lift (force measured in newtons), due to bernoulli's principle on an airplane wing or area of 88m^2 if the air passes over the top and bottom surfaces at speeds of 280 m/s and 150 m/s, respectively? assume the height difference between the top and bottom is negligible.
According to Bernoulli's Principle, the lift on an airplane wing with an area of 88m², when the air passes over the top and bottom surfaces at speeds of 280 m/s and 150 m/s respectively are 27,424 N.
Thus, the lift on an airplane wing respectively is 27,424 N with assume the height difference between the top and bottom is negligible.
For more information about Bernoulli's Principle refers to the link: https://brainly.com/question/2249706
#SPJ11
a tuning fork vibrating at 512 hz falls from rest and accelerates at 9.80 m/s2. how far below the point of release is the tuning fork when waves with a frequency of 480 hz reach the release point? take the speed of sound in air to be 340 m/s
Tuning fork is 0.223 m below the point of release when waves with frequency of 480 Hz reaches the release point.
What is a frequency?Number of waves that pass a fixed point in the unit time is known as frequency.
y = 1/2 * a * t²
y is distance traveled, a is acceleration, and t is time.
t = √(2y/a)
v = f * λ
v is speed of sound, f is the frequency, and λ is wavelength.
λ = v/f = 340 m/s / 480 Hz = 0.708 m
y = n * λ/2
where n is the number of half-wavelengths traveled.
y = λ/2 = 0.354 m
t = √(2y/a) --> y = 1/2 * a * t² = 1/2 * 9.80 m/s² * (2y/9.80 m/s²) = y
t = √(2y/a) --> t = √(2y/a) = √(2 * 0.354 m / 9.80 m/s²) = 0.212 s
Therefore, tuning fork falls for 0.212 seconds before the sound wave reaches the release point. During that time, the tuning fork travels a distance of:
y = 1/2 * a * t² = 1/2 * 9.80 m/s² * (0.212 s)² = 0.223 m
Therefore, tuning fork is 0.223 m below the point of release when waves with a frequency of 480 Hz reach the release point.
To know more about frequency, refer
https://brainly.com/question/254161
#SPJ1
now assume that the surface is rough (that is, not frictionless). you perform the experiment and observe that the second spring only compresses a distance d2/2. how much energy, in joules, was lost to friction?
Assuming the surface is frictionless, the energy lost to friction would be 0 Joules.
Energy lost due to FrictionFriction is the force that resists motion between two objects that are in contact with each other. In the experiment, friction is the force that resists the motion of the second spring as it compresses a distance of d2/2. Since the surface is rough, it provides a strong resistance to the motion of the spring, thus leading to a loss of energy.
However, if the surface had been frictionless, then the second spring would have compressed a distance of d2, as there would be no resistance to its motion. This means that no energy would have been lost to friction, as there would not have been any friction present in the system.
In conclusion, friction is the force that is responsible for the loss of energy in this experiment. When the surface is rough, the friction between the surface and the second spring is strong, leading to a loss of energy. However, when the surface is frictionless, the friction between the surface and the second spring is not present, thus no energy is lost to friction.
Learn more about Friction here:
https://brainly.com/question/24338873
#SPJ1
why do observations of high redshift type ia supernovae imply that the expansion of the universe is accelerating?
High redshift Type Ia supernovae observations imply that the universe's expansion is accelerating due to their consistent intrinsic brightness and their role as "standard candles" in measuring cosmic distances.
Type Ia supernovae are thermonuclear explosions of white dwarf stars that have a well-defined peak luminosity, allowing astronomers to determine their distance from Earth accurately. When astronomers observe these supernovae at high redshifts, they are looking back in time to see the universe at an earlier stage. The redshift refers to the observed shift in the light emitted by these objects towards the red end of the spectrum, caused by the Doppler effect as they move away from us due to the expansion of the universe.
A higher redshift corresponds to a more distant and earlier stage of the universe. By comparing the observed brightness of high redshift Type Ia supernovae with their known intrinsic brightness, astronomers can deduce how far away these objects are and how the universe has expanded over time. Observations of these distant supernovae have revealed that they are dimmer than expected, indicating that they are farther away than anticipated based on the standard models of cosmic expansion.
Know more about High redshift Type here:
https://brainly.com/question/2289242
#SPJ11
a marble is rolling around in the back of a small toy wagon as the wagon is pulled along the sidewalk. when the wagon is stopped suddenly by a rock under one of the wheels, the marble rolls toward the front of the wagon. why does the marble keep going when the wagon stops?
The marble keeps going when the wagon stops because of the Inertia.
What is inertia?Inertia is defined as the property of an object to remain in a state of rest or uniform motion in a straight line unless acted upon by an external force. Newton's first law of motion, often known as the law of inertia, explains this.
Inertia is a fundamental concept in physics, and it applies to everything, from electrons to massive objects like planets and galaxies.
When a small toy wagon with a rolling marble is abruptly stopped by a rock under one of its wheels, the marble moves forward since it has a forward velocity due to its motion when the wagon was rolling, and because of inertia.
As a result, when the wagon comes to a halt, the marble is still moving forward, allowing it to keep going until it eventually reaches the front of the wagon.
To know more about Inertia, click on the link below:
https://brainly.com/question/3268780#
#SPJ11
4) a button is at the rim of a turntable of radius 15.0 cm rotating at 45.0 rpmn. what is the minimum coefficient of friction needed for it to stay on?
The minimum coefficient of friction needed for the button to stay on the turntable is 0.22, assuming the turntable is a flat disk and neglecting air resistance.
When an object is placed on a rotating turntable, there must be a sufficient coefficient of friction between the object and the turntable to prevent it from sliding off. In this scenario, the button is placed at the rim of a turntable with a radius of 15.0 cm and is rotating at 45.0 rpm (revolutions per minute).
To determine the minimum coefficient of friction required for the button to stay on the turntable, we can use the centripetal force equation. The centripetal force required to keep the button in circular motion is provided by the force of friction acting on the button. If the frictional force is less than the centripetal force required, the button will slip off the turntable.
learn more about rotating turntable here:
https://brainly.com/question/29576572
#SPJ4
why can't we determine the gravitational constant g by simply measuring the force between the earth and a mass of a 100kg object?
The gravitational constant g cannot be determined by merely measuring the force between the earth and a mass of a 100kg object. This is because the gravitational constant G represents the proportionality between the force of gravity and the masses of the objects involved.
If one were to measure the force between the earth and a mass of 100kg object, then the force measured would be the weight of the object. However, this measurement of the weight of the object does not provide sufficient information to determine the gravitational constant G. This is because the weight of an object is dependent on the mass of the object and the acceleration due to gravity, which is defined as g. Therefore, in order to determine the gravitational constant G, one would need to measure the gravitational force between two masses of known values and distance.
Hence, it is not possible to determine the gravitational constant g by simply measuring the force between the earth and a mass of a 100kg object. To determine the gravitational constant g, an experiment called the Cavendish experiment is conducted, where two lead balls are suspended and the torsion balance is allowed to move. The force of attraction between the two masses is then calculated, which helps in determining the gravitational constant G.
To learn more about gravitational force refer to: brainly.com/question/27943482
#SPJ11
1. Vector A, having magnitude 2.5 m, pointing 37° south of east and vector B having
magnitude 3.5 m, pointing 20° north of east are added. What is the magnitude of the
resultant vector?
a. 1.0 m
b. 5.3 m
c. 5.9 m
d. 6.0 m
The resulting vector has a magnitude of roughly 5.9 m.
What is the formula for resultant vectors?When two or more vectors are added while adhering to the vector addition rules, the resultant vector is the resultant vector. When two vectors are supplied as R1 and R2, the resulting vector is given as R=R1+R2. This holds true not just for forces but also for every vector.
Let's first break down vector A into its constituent parts. It intersects the positive x-axis at an angle of 90° - 37° = 53°. The x-component of A is thus:
Ax = A cos(53°) = 2.5 cos(53°) ≈ 1.62 m
And the y-component of A is:
Ay = A sin(53°) = 2.5 sin(53°) ≈ 1.95 m
Let's now break down vector B into its component parts. It intersects the positive x-axis at a 20° angle. As a result, B's x-component is:
Bx = B cos(20°) = 3.5 cos(20°) ≈ 3.31 m
And the y-component of B is:
By = B sin(20°) = 3.5 sin(20°) ≈ 1.20 m
The vector sum of A and B is the resulting vector R. Using the Pythagorean theorem, we can determine the size of R:
|R| = sqrt(Rx² + Ry²)
where Rx and Ry are, respectively, R's x- and y-components. We combine the corresponding x- and y-components of A and B to yield Rx and Ry:
Rx = Ax + Bx ≈ 4.93 m
Ry = Ay + By ≈ 3.15 m
Now, we can find the magnitude of R:
|R| = sqrt(Rx² + Ry²) ≈ sqrt((4.93 m)² + (3.15 m)²) ≈ 5.85 m
To know more about magnitude visit:-
https://brainly.com/question/30395926
#SPJ1
HELPPPP (LOOK AT PHOTO)
The similarities and the differences between the velocity and acceleration have been shown below.
Present the similarities and difference between velocity and acceleration in a Venn diagramSimilarities:
Both are vectors, which means they have both magnitude and direction.
Both are measures of motion and are expressed in units of distance and time.
Both have the same units of distance per time, such as meters per second (m/s).
Differences:
Velocity measures the rate at which an object changes position over time, while acceleration measures the rate at which an object changes its velocity over time.
Velocity has direction and magnitude, while acceleration only has magnitude.
Velocity can be positive, negative or zero, depending on the direction of the object's motion, while acceleration can be positive or negative, depending on whether the object is speeding up or slowing down.
The SI unit of velocity is meters per second (m/s), while the SI unit of acceleration is meters per second squared (m/s^2).
Learn more about velocity:https://brainly.com/question/17127206
#SPJ1
In an experiment to estimate the size of a molecule of olive oil, a drop of oil of volume 0.12cm3 was placed on a clean water surface. The oil spread on a patch of area 6.0 x 10^6 mm^2.
a) Calculate the size of the molecule.
b) State an assumption made in the above calculations.
The following equation can be used to convert the oil drop's volume to mm3:1.2 x 10-3 mm3 = 0.12 cm3 = (0.1 cm) x 1.2 cm, it is possible to determine the thickness of the oil layer:1.2 x 10-3 mm3 / (6.0 x 10-6 mm2) = 2.0 x 10-10 mm thickness.
How can you figure out how big an oil molecule is?The thickness of the monolayer, which is the height of the oil molecule on water, can be calculated by measuring the area of the monolayer and dividing the volume of the drop by that area.
In the oil drop experiment, what size is a molecule?Results from this experiment suggest that the diameter of a molecule of oil is about 10-10m, and this has been confirmed by X-ray diffraction.
To know more about molecule visit:-
brainly.com/question/19922822
#SPJ1
for a simple harmonic oscillator, when (if ever) are the displacement and velocity vectors in the same direction? when are the displacement and acceleration vectors in the same direction?
Both displacement and velocity always point in the same direction. As acceleration always counters displacement, the two variables never move in the same direction.
when both the force's direction and its displacement match up?Whenever the displacement & force both are travelling in the same direction, the force produces positive work. Is when displacement and the pressure are travelling in the opposing directions, the force does negative work. Friction's work always seems to be negative since it always prevents motion.
With a simple harmonic oscillator, what's the phase ratio between displacement and speed?V = A w c o (wt) Sine and cosine functions have a phase difference of 90 degrees, or pi/2 radians. Hence, there is a 90 degree phase mismatch between displacement and velocity, or pi/2 radians. The equation of velocity can also be differentiated to produce acceleration.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ1
how many joule sof energy are needed to heat 30g of glass from 25 degrees celsius to 1000 degree celsusius
The energy needed to heat 30g of glass from 25 degrees Celsius to 1000 degrees Celsius is 23,310 joules.
To find out the joules of energy needed to heat 30g of glass from 25 degrees celsius to 1000 degrees Celsius, we can use the specific heat capacity formula. The specific heat capacity is the amount of heat needed to raise the temperature of 1 gram of the material by 1 degree Celsius. Here is the formula:
Q = m x c x ΔT
Where:
Q = Joules of energy needed
m = mass of the glass (30g in this case)
c = specific heat capacity of the glass
ΔT = change in temperature (1000 - 25 = 975 degrees Celsius)
The specific heat capacity of glass is approximately 0.84 J/g°C. So we can plug these values into the formula and solve for Q:
Q = 30g x 0.84 J/g°C x 975°C
Q = 23,310 Joules
Therefore, 23,310 Joules of energy are needed to heat 30g of glass from 25 degrees Celsius to 1000 degrees Celsius.
Learn more about energy and heat at: https://brainly.com/question/25384702
#SPJ11
if an ordinary household refrigerator is left operating with the door open in a closed, perfectly insulated room, what will happen to the temperature in the room after several hours?
Leaving an ordinary household refrigerator operating with the door open in a perfectly insulated room will cause the room temperature to increase over time. This is because the refrigerator expels heat into the room while trying to cool its interior.
In a completely insulated room, the temperature can gradually increase if a typical family refrigerator is left running with the door open. This is because, while it works to chill its inside, the refrigerator releases heat into the surrounding space. The compressor and other cooling elements will continue to function with the door open, radiating heat into the room even though the refrigerator is meant to collect heat from its contents and expel it outside. A room with perfect insulation will see a gradual rise in temperature since the heat will have nowhere to go. The size of the space, the refrigerator's power, and how long the door is left open will all affect how quickly the temperature rises.
learn more about insulated here:
https://brainly.com/question/24909989
#SPJ4
Explain how the structure of DNA enables the molecule to be easily transcribed. Why is this important for genetic infomation
The nucleotides included in DNA allow for the joining of the two strands to form a double helix shape. The nucleotides are cytosine, adenine, guanine, and thiamine. The Strand of DNA unzips during transcription to enable the production of mRNA.
Why is knowledge of DNA's architecture as well as replication process crucial?
The plan for existence on this planet is included in it. enables humans and organisms to defend themselves against sickness and helps us grasp faults.
Biological physics makes use of physics' methods and instruments to comprehend the internal world of the mechanism present in living things on length different scales first from molecule to the macroscopic.
To know more about physics click here
brainly.com/question/28600368
#SPJ4
a charged object is moving in a region in space with a uniform magnetic field . there is no other force acting on the object. as a result, the particle's path is a circle of radius . determine the direction of the magnetic field.
When a charged object is moving in a region in space with a uniform magnetic field and no other force is acting on the object, the particle's path is a circle of radius.
When a charged object is moving in a region in space with a uniform magnetic field and no other force is acting on the object, the particle's path is a circle of radius. As a result of this, the magnetic force that acts on the particle is given by the formula: F = Bqv where; F is the magnetic force acting on the particle B is the magnetic field strength v is the velocity of the charged particle q is the electric charge of the particle.
The direction of the magnetic field can be determined by applying the right-hand rule. When the right-hand thumb is pointed in the direction of the velocity of the charged particle, and the fingers are pointed in the direction of the magnetic field, the magnetic force on the particle is directed perpendicular to both the magnetic field and the velocity of the particle. Therefore, using the formula F = Bqv, the magnetic field can be calculated and its direction determined.
Know more about magnetic force
https://brainly.com/question/2279150
#SPJ11
3. If you push a 5 kg box on a flat surface with a coefficient of kinetic friction of μ = 0.25 with a constant force of F = 80 N for D = 10 m, what is the work you did on the block?
Tthe work done by the person on the block is 677.4 J.
What is work done?
The work done on an object by a force is defined as the product of the force and the displacement of the object in the direction of the force.
In this case, the force is constant, so we can use the formula:
work = force × displacement × cos θ
Where θ is the angle between the force and the displacement vectors. Since the force is applied horizontally and the displacement is also horizontal, θ = 0 and cos θ = 1. Therefore:
work = force × displacement
We need to determine the force that is parallel to the displacement, which is the force of friction opposing the motion. The force of friction is given by:
friction = μN
Where
μ is the coefficient of kinetic frictionN is the normal force exerted by the surface on the objectSince the object is on a flat surface and is not accelerating vertically, the normal force is equal in magnitude to the weight of the object:
N = mg
Where
m is the mass of the object g is the acceleration due to gravityTherefore:
friction = μmg
Substituting the given values:
friction = (0.25)(5 kg)(9.81 m/s²) = 12.26 N
Since the force of friction opposes the motion, its direction is opposite to the force applied by the person. Therefore, the net force on the object is:
F_net = F - friction = 80 N - 12.26 N = 67.74 N
The displacement of the object is D = 10 m. Therefore, the work done on the object is:
work = F_net × D = (67.74 N)(10 m) = 677.4 J
Therefore, the work done by the person on the block is 677.4 J.
Learn more about work done here : brainly.com/question/25816840
#SPJ1
A current‑carrying wire lies in a region where there is an external magnetic field, but there is no magnetic force acting on the wire. How can this be?a) the length of the wire is oriented either parallel or antiparallel to the magnetic field lines at the location of the wireb) the current is carried by equal numbers of positive and negative charges that flow in opposite directions along the wirec) the magnetic field is generated by a second wire carrying a current in the opposite
The magnetic force acting on a current-carrying wire is determined by the direction of the external magnetic field and the direction of the current flowing through the wire.
If the length of the wire is oriented either parallel or antiparallel to the external magnetic field lines at the location of the wire, then the magnetic force acting on the wire will be zero.
This is because the magnetic field lines would be either in the same direction as the current or in the opposite direction, but the two forces would cancel each other out.
Additionally, if the current is carried by equal numbers of positive and negative charges that flow in opposite directions along the wire, then the magnetic force acting on the wire will also be zero. This is because the two opposite magnetic forces created by the two opposite charges will cancel each other out.
Lastly, if the magnetic field is generated by a second wire carrying a current in the opposite direction, then the two magnetic fields will cancel each other out and no force will be acting on the wire.
Know more about magnetic force here
https://brainly.com/question/3160109#
#SPJ11
A diver estimates the depth of water to be 10m, but realizes that it is much deeper when he dives into it. Explain why he was wrong in his judgment.
Light moves in a different path when it passes through the boundary between air and water because the two media move at different speeds. Refraction is the name for this optical distortion.
For the 10-meter dive, how deep is the water?Because platform and springboard diving are done in the same pool, the country holding the Olympics must follow FINA's recommended minimum depth for 10-meter platform diving, which is five meters, or 16 feet deep.
At a depth of 10 meters, how much weight is placed on the diver?The free diver feels 2 atm of pressure at a depth of 10 metres. Lungs slightly constrict as the free diver descends into the ocean due to increased pressure. Living in the ocean is different from living on earth because of pressure.
To know more about Refraction visit:-
https://brainly.com/question/14760207
#SPJ1
which one of the following is not a real type of particle? which one of the following is not a real type of particle? antiparticles quarks neutrinos tachyons
Tachyons is not a real type of particle. The correct answer is d.
Tachyons are hypothetical particles that are proposed to travel faster than the speed of light. They have not been observed in experiments and are not considered to be real particles in the Standard Model of particle physics. The existence of tachyons would violate the theory of relativity, which states that the speed of light is the maximum speed at which matter or information can travel.
On the other hand, antiparticles, quarks, and neutrinos are all real types of particles that have been observed and studied in particle physics. Antiparticles are particles that have the same mass as their corresponding particles but have opposite charges. Hence, option d is the correct answer.
To know more about particles, here
brainly.com/question/30430846
#SPJ4
sharon serves the volleyball to barbara with an upward velocity of 23ft/s . the ball is 3.5 feet above the ground when she strikes it. how long does barbara have to react, before the volleyball hits the ground? round your answer to two decimal places.
Varbara have to react , before the volleyball hits the ground in 0.71 s.
Calculate the periodSolve for the time that Barbara has to react before the volleyball hits the ground, we need to use the formula below:
t = (v_f - v_i)/g
Where:v_f = final velocity (when the ball hits the ground, its velocity is 0) v_i = initial velocity (given as 23 ft/s, upwards) g = acceleration due to gravity (constant at 32.2 ft/s²)
So we have:v_i = 23 ft/st = ?g = 32.2 ft/s²
Using these values:
0 = 23 - 32.2t
t = 23/32.2
t ≈ 0.71 seconds.
Rounding to two decimal places, Barbara has approximately 0.71 seconds to react before the volleyball hits the ground.
Therefore, the correct option is 0.71 seconds.
Learn more about velocity at
https://brainly.com/question/30559316
#SPJ11
g neglecting heat losses in the system, what is the amount of time t will it take to boil the water in the cup?
The initial temperature of the water, the heat source, and the volume of water being boiled are some of the variables that affect how long it takes to boil water.
How do you calculate the amount of heat that water loses?4.18 J/g/°C is the specific heat capacity of water. What we are interested in is the quantity of heat, or Q. To do this, we would apply the formula Q = m•C•T. The m, C, and T can be calculated using the initial and final temperatures.
What's the heat equation?How much heat is gained or lost by a sample can be calculated using the equation q = mcT, where m is the mass of the sample, c is the T represents the change in temperature, while S is specific heat (q).
To know more about heat capacity visit:-
https://brainly.com/question/1747943
#SPJ1
How much energy needed to raise temperature 1 degree Celsius?
Answer:
4.18 joules of heat energy to raise a gallon of water by 1 degree celcius
Explanation:
suppose you could not see violet, but you could see infrared light. what would be the middle of your hypothetical visible spectrum?
If a person could not see violet but could see infrared light, the middle of their hypothetical visible spectrum would be green.
The middle of the hypothetical visible spectrum in this scenario would be red, as it is the middle of the traditional visible spectrum (ROYGBIV). Infrared light is not part of the visible spectrum, so it would not factor into the middle of the hypothetical visible spectrum.
The traditional visible spectrum is made up of red, orange, yellow, green, blue, indigo, and violet (ROYGBIV).
The visible spectrum of light is the part of the electromagnetic spectrum that is visible to the human eye. The spectrum ranges from red to violet, with red light having the longest wavelength and violet light having the shortest wavelength. If a person could not see violet, but they could see infrared light, the middle of their hypothetical visible spectrum would be green.Infrared light has a longer wavelength than visible light, which means it has a lower frequency. It is not visible to the human eye. The color green, on the other hand, has a wavelength of about 520-570 nm, which is in the middle of the visible spectrum.
Learn more about visible spectrum:
https://brainly.com/question/4901067
#SPJ11
an empty balloon sits 10 meters away from a golf ball. jamie wants to increase the gravitational force between the two objects by filling the balloon with a substance and holding it 10 meters away from the golf ball. which substance should jamie use to increase the gravitational force between the balloon and the golf ball the most?
Jamie should fill the balloon with lead to increase the gravitational force between the balloon and the golf ball.
The gravitational force between two objects depends on their masses and the distance between them. The formula for the gravitational force is, F = G * (m1 * m2) / r^2, where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between them.
To increase the gravitational force between the balloon and the golf ball, Jamie needs to increase the masses of the objects or decrease the distance between them. Since the distance is fixed at 10 meters, the only way to increase the gravitational force is to increase the masses of the objects.
Therefore, Jamie should fill the balloon with a substance that has a high mass. One substance that has a high mass is lead, which has a density of 11.34 g/cm^3. By filling the balloon with lead, Jamie can increase the mass of the balloon and therefore increase the gravitational force between the balloon and the golf ball.
To know more about gravitational force, here
brainly.com/question/12528243
#SPJ4
Which characteristic of water protects fish when a lake freezes?A. cohesionB. All of the these characteristics.C. water as a solventD. water is less dense as a solid
The characteristics of water that protects fish when a lake freezes is, water is less dense as a solid. Option D is correct choice.
This characteristic of water is known as its "anomalous expansion," where water molecules form a crystalline structure as they freeze, causing them to be more spread out and less dense than liquid water. This means that when a lake freezes, the layer of ice that forms on the surface is less dense than the water below it, so it floats.
This creates an insulating layer of ice that helps to regulate the temperature of the water below and provides protection for aquatic life, including fish. If water behaved like most other substances, the ice would sink and the entire body of water would eventually freeze solid, making it uninhabitable for many species. Hence, option d is correct choice.
To know more about water, here
brainly.com/question/23171274
#SPJ4
Which scenario correctly illustrates heat?
bathtub full of hot water gets even warmer in a cold room
ice in a cold glass of water remains ice and never melts
cold person gets even colder when they sit in a sauna with a temperature of 105° F
cold person’s hands get warmer by holding a rock that has been sitting in the sun
The scenario that correctly illustrates heat is: "a bathtub full of hot water gets even warmer in a cold room."
What is heat?Heat is a form of energy that is transferred between two or more objects or systems due to a difference in temperature. Heat energy flows from hotter objects or systems to colder ones until thermal equilibrium is reached, meaning that the temperatures of the objects or systems become equal.
The scenario of a bathtub full of hot water gets even warmer in a cold room illustrates heat because heat always flows from hotter objects to colder objects until they reach thermal equilibrium. In this scenario, the hot water in the bathtub is at a higher temperature than the cold room, so heat flows from the water to the surrounding air, causing the water to become even warmer.
Learn about heat transfer here https://brainly.com/question/16055406
#SPJ1
A 385-g tile hangs from one end of a string that goes over a pulley with a moment of inertia of 0.0125 kg ? m2 and a radius of 15.0 cm. A mass of 710 g hangs from the other end of the string. When the tiles are released, the larger one accelerates downward while the lighter one accelerates upward. The pulley has no friction in its axle and turns without the string slipping. What is the tension in the string on the side of the 710-g tile?
A) 6.87 N B) 4.41 N C) 9.77 N D) 3.68 N E) 5.59 N
The solution is D) 3.68 N (rounded to two significant figures).
Calculation-Let's find the system's acceleration first. The difference between the force due to the 710 g mass and the force due to the 385 g mass is the net force acting on the system. Considering upward as favourable,
net force = (710 g)(9.8 m/s^2) - (385 g)(9.8 m/s^2) = 3.213 N
The 385 g mass produces an anticlockwise torque, but the 710 g mass produces a clockwise (negative) torque. (positive). When we apply the torque formula, = I, where, the pulley's moment of inertia and is its angular acceleration, we get
τ = (0.0125 kg ? m^2)(α)
The torque due to the 710 g mass is given by
τ = (0.710 kg)(9.8 m/s^2)(0.15 m) = 1.038 Nm
The torque due to the 385 g mass is given by
τ = (0.385 kg)(9.8 m/s^2)(0.15 m) = 0.567 N
2 / 2
First, let's find the acceleration of the system. The net force on the system is the difference between the force due to the 710 g mass and the force due to the 385 g mass. Taking upward as positive,
net force = (710 g)(9.8 m/s^2) - (385 g)(9.8 m/s^2) = 3.213 N
The torque due to the 710 g mass is clockwise (negative), while the torque due to the 385 g mass is counterclockwise (positive). Using the formula for torque, τ = Iα, where I is the moment of inertia of the pulley and α is its angular acceleration, we have
τ = (0.0125 kg ? m^2)(α)
The torque due to the 710 g mass is given by
τ = (0.710 kg)(9.8 m/s^2)(0.15 m) = 1.038 Nm
The torque due to the 385 g mass is given by
τ = (0.385 kg)(9.8 m/s^2)(0.15 m) = 0.567 Nm
Thus, the net torque is
net torque = (1.038 N ? m) - (0.567 N ? m) = 0.471 Nm
Using the formula for torque, τ = Fr, where F is the tension in the string and r is the radius of the pulley, we have
τ = (F)(0.15 m)
F = net torque / r = (0.471 Nm) / (0.15 m) = 3.14 N
T = (710 g)(9.8 m/s^2) - F = 6.96 N - 3.14 N = 3.82 N
to know more about the moment of inertia here;
brainly.com/question/15246709
#SPJ1
Find the acceleration (in m/s^2) of a car that travels from rest, to a velocity of 60 m/s in a distance of 212.0 ft.
A. 32 m/s^2
B. 27.9 m/s
C. 27.9 ft/s^2
D. 27.9 m/s^2
According to the given statement The acceleration of the car is 32 m/s²
How do you define an acceleration?Every procedure where velocity varies is referred to as acceleration. There are only two ways to accelerate: changing your speed , changing your direction, or changing both. This is due to the fact that velocity is both a speed or a direction.
The distance in feet must first be converted to metres:
212.0 ft = 64.6216 m
The kinematic equation can then be applied:
v² = u² + 2as
where,
The final velocity is v. (60 m/s),
u is the starting speed (0 m/s),
a denotes the acceleration,
s denotes the distance. (64.6216 m).
Solving for a, we get:
a = (v² - u²) / (2s)
a = (60² - 0²) / (2 * 64.6216)
a ≈ 32 m/s²
To know more about Acceleration visit:
https://brainly.com/question/12550364
#SPJ1
The Amoeba she observed under the microscope was...?
Answer:
a tiny blob of colourless jelly with a drak speck
a rocket is being launched. after a while, it rises at a constant velocity of 30 miles per second. an observer is standing 112 miles from the launching site. how fast is the distance between the rocket and the observer changing when the rocket is at a height of 15 miles? present your answer as an approximation, accurate up to three or more decimals.
Answer:
To solve this problem, we need to use the chain rule to find the derivative of the distance between the rocket and the observer with respect to time.
Let's call the distance between the rocket and the observer "d" and the height of the rocket "h". We know that the rocket is rising at a constant velocity of 30 miles per second, so its height can be expressed as:
h = 30t
where t is the time since the rocket started rising.
Using the Pythagorean theorem, we can express the distance between the rocket and the observer as:
d^2 = h^2 + 112^2
Differentiating both sides with respect to time, we get:
2d * (dd/dt) = 2h * (dh/dt)
where (dd/dt) is the rate of change of the distance between the rocket and the observer and (dh/dt) is the rate of change of the height of the rocket.
Solving for (dd/dt), we get:
(dd/dt) = (h/d) * (dh/dt)
Substituting the expressions for h and d, we get:
(dd/dt) = (30t) / sqrt((30t)^2 + 112^2)
When the rocket is at a height of 15 miles, we can find the corresponding value of t as follows:
15 miles = 15 * 5280 feet = 79200 feet
79200 feet / 5280 feet per second = 15 seconds
Substituting t = 15 seconds into the expression for (dd/dt), we get:
(dd/dt) = (30 * 15) / sqrt((30 * 15)^2 + 112^2)
= 450 / sqrt(22500 + 12544)
= 450 / sqrt(35044)
= 2.409
Therefore, the rate of change of the distance between the rocket and the observer when the rocket is at a height of 15 miles is approximately 2.409 miles per second.