Who was the first person that was to attend to arrange the element in what year

If cost is a significant constraint for Itea city in choosing a water purification method for their water supply, then the fact that ion exchange systems are more expensive because of the use of filters that need replacement would be important to consider.

While reverse osmosis systems are also more expensive, it is primarily due to the chlorine treatments, which may not be a significant factor for the city. Therefore, ion exchange systems may not be a cost-effective option in the long run due to the ongoing expenses of replacing filters.

This information can help inform the city's decision-making process and ensure that they choose a water purification method that meets their needs while also being financially feasible.

to know more about water purification refer here

https://brainly.com/question/29629219#

#SPJ11

The molarity of the potassium hydroxide solution is 2.0 M.

We know that, Molarity (M) = moles of solute (mol) / volume of solution (L)

We have 0.0400 mol of KOH dissolved in 20.0 mL of water.

Volume of the solution= 20.0 mL = 20.0 / 1000 = 0.0200 L

Therefore, molarity = (0.0400 mol) / (0.0200 L) = 2.0 M

So, the molarity of the potassium hydroxide solution is 2.0 M.

Thus, option 3 is the correct answer.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

Answer:

A: PQ

Explanation:

Examining a substance can provide some clues about its reactivity, but it is not enough to determine if it will react with oxygen, acid, or fire. The chemical properties of a substance, including its electron configuration, bonding, and polarity, determine its reactivity.

Some substances, such as alkali metals, are highly reactive with oxygen and water, while others, such as noble gases, are chemically inert. Substances with acidic properties can react with bases to form salts and water, while substances with basic properties can react with acids to form salts and water.

Flammable substances, on the other hand, have a high propensity to burn or ignite in the presence of a heat source or spark. Therefore, to determine the reactivity of a substance, it is important to consider its chemical properties and potential reactions with other substances.

To know more about the chemical properties refer here :

https://brainly.com/question/1935242#

#SPJ11

The molarity of the solution comes out to be 0.200 M, which is calculated in the below section.

The number of moles of calcium iodide can be calculated as follows-

n = m / M ......(1)

Molar mass (M) of Calcium iodide = 293.887 g/mol

Mass (m) = 58.8 grams

Substitute the known values in equation (1) as follows-

n = 58.8 grams / 293.887 g/mol

   = 0.200 moles

Now, the molarity can be calculated using the below formula-

Molarity = no. of moles / Volume

              = 0.200 moles / 1 L

               = 0.200 M

To learn more about molarity check the link below-

https://brainly.com/question/30404105

#SPJ4

Complete question-

Find the molarity of a solution that contains 58.8 grams of calcium iodide (CaI2), per liter.

The blood alcohol concentration (BAC) of eight male subjects was measured after consuming 15 ml of ethanol, and a concentration function was derived. In this answer, we calculate the rate of change of BAC and interpret the results in the context of the problem.

After 6 minutes, the BAC was increasing at a certain rate, and half an hour later, it was decreasing at a different rate according to the model.

To find the rate of change of blood alcohol concentration (BAC) and interpret the results in the given context:

(a) We are asked to find how rapidly the BAC is increasing after 6 minutes. We can calculate the derivative of the concentration function with respect to time:

[tex]$c'(t) = 0.00225 e^{-0.0467t} - 0.0467 \cdot 0.00225 \cdot t \cdot e^{-0.0467t}$[/tex]

Evaluate c'(6) to find the rate of change at 6 minutes.

(b) For the rate of decrease half an hour later, we need to calculate c'(t) at t = 30 minutes.

After finding the values, we can interpret the answers by considering the units: (g/dl)/min represents the change in BAC concentration per minute.

The model predicts that the BAC will decrease by the respective amounts after the specified time periods.

To know more about the blood alcohol concentration refer here :

https://brainly.com/question/28245369#

#SPJ11

0.72 L (or 720 mL) of the 4.5 M HCl solution is required to prepare a 65 L solution of 0.050 M HCl.

We need to dilute a concentrated 4.5 M HCl solution. We can use the dilution equation to calculate the volume of the concentrated solution required:

[tex]M_1V_1 = M_2V_2[/tex]

where M1 is the concentration of the concentrated solution, V1 is the volume of the concentrated solution required, M2 is the concentration of the diluted solution, and V2 is the final volume of the diluted solution.

In this case, we want to prepare a 65 L solution of 0.050 M HCl from a 4.5 M HCl solution. Therefore:

[tex]M_1[/tex] = 4.5 M

[tex]V_2[/tex] = 65 L

[tex]M_2[/tex] = 0.050 M

Solving for V1:

[tex]V_1 = (M_2 * V_2) / M_1 \\V_1 = (0.050 M * 65 L) / 4.5 M \\V_1 = 0.72 L[/tex]

To know more about HCl solution, here

brainly.com/question/31019516

#SPJ4

When 0.40 mol of propane is burned completely with 2.00 mol of oxygen, the reaction produces 1.20 mol of carbon dioxide and 1.60 mol of water.

The reaction in question involves the complete combustion of 0.40 mol of propane (C3H8) with 2.00 mol of oxygen (O2). The balanced chemical equation for this reaction is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

In this reaction, one mole of propane reacts with five moles of oxygen to produce three moles of carbon dioxide (CO2) and four moles of water (H₂O).

To determine if there is enough oxygen for the complete combustion of propane, we can use stoichiometry. For every mole of propane, we need five moles of oxygen. So, for 0.40 moles of propane, we need:

0.40 mol C₃H₈ × (5 mol O₂ / 1 mol C₃H₈) = 2.00 mol O₂

Since we have exactly 2.00 moles of oxygen available, there is enough oxygen for the complete combustion of the 0.40 moles of propane. The products formed will be:

0.40 mol C₃H₈ × (3 mol CO₂ / 1 mol C₃H₈) = 1.20 mol CO₂
0.40 mol C₃H₈ × (4 mol H₂O / 1 mol C₃H₈) = 1.60 mol H₂O

In conclusion, when 0.40 mol of propane is burned completely with 2.00 mol of oxygen, the reaction produces 1.20 mol of carbon dioxide and 1.60 mol of water.

To know more about propane, visit:

https://brainly.com/question/25008296#

#SPJ11

The freezing point of 4.09 kg of water with 186.4 g of Ca[tex]Br_2[/tex] is -0.4244 °C.

To calculate the freezing point of the water with the given amount of Ca[tex]Br_2[/tex], we need to use the formula for freezing point depression:

ΔTf = Kf × molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant, and molality is the concentration of solute particles in the solution.

First, we need to calculate the molality of the solution:

m = moles of solute / mass of solvent (in kg)

We know the mass of water is 4.09 kg, and the molar mass of Ca[tex]Br_2[/tex] is 199.89 g/mol. Therefore, the number of moles of CaBr2 is:

n = 186.4 g / 199.89 g/mol = 0.932 mol

The mass of water is 4.09 kg = 4090 g, so the molality of the solution is:

m = 0.932 mol / 4.09 kg = 0.2279 mol/kg

Now we can use the freezing point depression constant for water to calculate the change in freezing point:

ΔTf = 1.86 °C/m × 0.2279 mol/kg = 0.4244 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

Freezing point = 0 °C - 0.4244 °C = -0.4244 °C

Therefore, the freezing point of 4.09 kg of water with 186.4 g of CaBr2 is -0.4244 °C.

To know more about freezing point calculation:

https://brainly.com/question/31432159

#SPJ11

The energy of a photon that emits a light of frequency 6. 42 x 1014 Hz is 4.25 x 10^-19 J.

The energy of a photon can be calculated using the equation:

E=hf,

where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), and f is the frequency of the light emitted by the photon.

Plugging in the given frequency of 6.42 x 10^14 Hz into the equation, we get

E=(6.626 x 10^-34 J.s)(6.42 x 10^14 Hz) = 4.25 x 10^-19 J.

Therefore, the correct answer is B i.e, 4.25 x 10^-19 J.

It should be emphasized that a photon's energy is directly linked to its frequency and inversely related to its wavelength. Therefore, light with higher frequency, such as blue light, contains more energy than light with lower frequency, such as red light.

Know more about Energy here:

https://brainly.com/question/1932868

#SPJ11

The mass of sodium chloride that reacts with 275.0g of sulfuric acid is 327.6 grams.

To solve this problem, we need to use stoichiometry.
First, we need to determine the mole ratio between sodium chloride and sulfuric acid.
2NaCl + H₂SO₄ → 2HCl + Na₂SO₄

From the balanced equation, we see that 2 moles of NaCl react with 1 mole of H₂SO₄.

Next, we need to convert the given mass of sulfuric acid to moles using its molar mass.
Molar mass of H₂SO₄ = 98.08 g/mol
275.0 g H₂SO₄ x (1 mol H₂SO₄/98.08 g H₂SO₄) = 2.805 mol H₂SO₄

Finally, we can use the mole ratio to determine the moles of NaCl needed to react with the given amount of sulfuric acid.
2.805 mol H₂SO₄ x (2 mol NaCl/1 mol H₂SO₄) = 5.61 mol NaCl

Now we can convert the moles of NaCl to grams using its molar mass.
Molar mass of NaCl = 58.44 g/mol
5.61 mol NaCl x (58.44 g NaCl/1 mol NaCl) = 327.6 g NaCl

Therefore, the mass of sodium chloride that reacts with 275.0g of sulfuric acid is 327.6 grams.

To know more about stoichiometry :

https://brainly.com/question/28780091

SPJ11

Phospholipids will form a sheet-shaped double layer when placed in water. The correct answer is option c.

This is known as a phospholipid bilayer, which is a fundamental component of cell membranes.

The hydrophilic (water-loving) phosphate heads of the phospholipids face outwards and interact with the water molecules, while the hydrophobic (water-fearing) fatty acid tails face inwards and interact with each other.

The phospholipid bilayer provides a selectively permeable barrier that allows certain substances to pass through the membrane while preventing others from doing so.

Additionally, the fluidity of the phospholipid bilayer can be regulated by various factors, such as temperature and the presence of cholesterol, allowing for optimal membrane function in different cellular environments.

The correct answer is option c.

To know more about Phospholipids refer to-

https://brainly.com/question/14949280

#SPJ11

Complete Question

What will phospholipids form when placed in water?

a. a sphere-shaped single layer

b. a sphere-shaped double layer

c. a sheet-shaped double layer

d. a sheet-shaped single laye

An atom is an indivisible particle of the matter and it is the fundamental building blocks of the matter. Some examples of atoms are sodium atom, fluorine atom, etc. It is the smallest unit of matter.

The elements are defined as the substance which is made up of same kind of atoms and that cannot be broken down into simpler form by any physical or chemical methods. Carbon is an element.

Carbon - C = 1 C atom

Oxygen molecule - O₂ = 2 'O' atoms

Methane - CH₄ = 1 'C' and 4 'H' atoms

Iron - Fe = 1 'Fe' atom

Glucose - C₆H₁₂O₆ = 6 'C', 12 'H' and 6 'O' atoms

Hydrogen chloride - HCl

Sulfur dioxide - SO₂ = 1 'S' and 2 'O' atoms

To know more about atoms, visit;

https://brainly.ph/question/2397729

#SPJ1

0.490 moles of oxygen gas, O₂, are produced from 0. 980 moles of hydrogen peroxide, option A is correct.

The balanced chemical equation for the decomposition of hydrogen peroxide is:

2 H₂O₂ → 2 H₂O + O₂

According to the equation, 1 mole of oxygen gas is created for every 2 moles of hydrogen peroxide that breaks down.

So, to find the number of moles of oxygen gas produced from 0.980 moles of hydrogen peroxide, we can use a proportion:

1 mole of O₂ is created from 2 moles of H₂O₂.

0.980 moles of H₂O₂ produces x moles of O₂

x = (0.980 mol × 1 mol O₂) ÷ 2 mol H₂O₂

x = 0.490 mol

Hence, option A is correct.

To learn more about oxygen follow the link:

brainly.com/question/21220673

#SPJ4

The complete question is:

Given the following balanced reaction of hydrogen peroxide decomposing to form oxygen gas and water, how many moles of oxygen gas, O₂, are produced from 0. 980 moles of hydrogen peroxide?

A) 0.490 mol

B) 0.50 mol

C) 1.96 mol

2.64 x 10³ kJ of energy was produced.

To calculate the energy produced, we need to use the equation:

ΔE = q = nΔH

where ΔE is the energy produced (in joules), q is the heat absorbed or released (in joules), n is the number of moles of gas produced, and ΔH is the enthalpy change (in joules/mol).

First, we need to calculate the number of moles of CO2 produced:

PV = nRT

n = PV/RT

n = (1.18 atm)(60.0 L)/(0.0821 L·atm/mol·K)(298 K)

n = 2.59 mol

Next, we need to find the enthalpy change for the reaction that produced the CO2 gas. Let's assume it is -393.5 kJ/mol (the standard enthalpy of formation of CO2). Therefore, ΔH = -1020 kJ.

Finally, we can calculate the energy produced:

ΔE = q = nΔH

ΔE = (2.59 mol)(-1020 kJ/mol)

ΔE = -2640 kJ

Rounding to three significant figures, we get:

ΔE = -2.64 x 10³ kJ

Therefore, approximately 2.64 x 10³ kJ of energy was produced.

To learn more about moles, refer below:

https://brainly.com/question/31597231

#SPJ11

Answer: 4.7g NH4Cl

Explanation:

First we need to determine how many moles of NH4Cl we have:

0.250Lx0.35M= 0.0875moles

now we can multiply the molar mass of NH4Cl by how many moles we have

NH4Cl has a molar mass of 53.49g/mol

53.49 x 0.0875= 4.68g NH4Cl or 4.7g NH4Cl using 2 sig figs.

In fire, the energy released is slower as compared to the explosion in which the energy released is faster and more damaging.

Fires and Explosions are phenomena that releases a high amount of heat and light into their surrounding. Both of them causes the surroundings to burn down if they are not performed or caused in a controlled environment.

However, the main difference between the two is the rate at which the energy is released. In a fire, the energy which is released be it heat energy or light energy, the energy is released slowly through combustion as compared to explosions. Fires basically involve a sustained combustion process.

In an explosion the energy that is released at an extreme rate, it creates shockwaves that can cause damage significantly to its surrounding. Explosions are a one-time event.

Learn more about Combustion at:

https://brainly.com/question/28469125

#SPJ1

There are several factors that can contribute to the temperature difference between Los Angeles (LA) and New York (NY).

One of the most significant factors is their geographical location. LA is located on the west coast of the United States, close to the Pacific Ocean, which has a cooling effect on the city's climate.

In contrast, NY is situated on the east coast, where it is influenced by the warm Gulf Stream current, which has a warming effect on the city's climate.

Another factor that contributes to the temperature difference between the two cities is their elevation. LA is situated at a much lower elevation than NY, which means it is closer to sea level.

This can result in warmer temperatures as the air is denser at lower elevations and can hold more heat. In contrast, NY's higher elevation means that the air is thinner, and it can't hold as much heat, resulting in cooler temperatures.

Finally, the two cities have different climate zones. LA has a Mediterranean climate, which means it has warm, dry summers and mild, wet winters. In contrast, NY has a humid subtropical climate, which means it has hot, humid summers and cold, snowy winters.

These different climate zones can result in significant temperature differences between the two cities.

To learn more about air, refer below:

https://brainly.com/question/19368011

#SPJ11

Plants are multicellular eukaryotes that belong to the Kingdom Plantae. They are characterized by various features, including the ability to produce their food through photosynthesis, a rigid cell wall composed of cellulose, and a lack of mobility. However, not all organisms that photosynthesize are plants.

To determine if something is a plant, biologists usually consider several criteria, including:

1. Photosynthesis: Plants are autotrophs that use chlorophyll and other pigments to capture light energy and convert it into chemical energy to synthesize their food.

2. Cell structure: Plants have a rigid cell wall composed of cellulose, which provides structural support to the cell and prevents it from bursting. The presence of cellulose is a defining feature of plants.

3. Reproduction: Most plants reproduce sexually, but some can reproduce asexually. Sexual reproduction in plants involves the fusion of gametes produced by male and female reproductive structures.

4. Growth: Plants grow by increasing the number and size of their cells, and they can form complex organs such as roots, stems, and leaves.

5. Lack of mobility: Unlike animals, plants are immobile and are rooted to the ground or a substrate.

By considering these characteristics, scientists can determine whether an organism belongs to the Kingdom Plantae or not.

to know more about Kingdom Plantae refer here:

https://brainly.com/question/13179714#

#SPJ11

Writing a persuasive speech can be a powerful way to communicate your ideas and persuade your audience to take action. Here's an outline you can use to structure your speech on "Why more people connect more with nature":

I. Introduction

A. Attention-getter: Start with a thought-provoking statement or a compelling story that relates to the topic.

B. Thesis statement: Clearly state your position on the topic and preview the main points you will cover in the speech.

C. Credibility statement: Establish your credibility on the topic by sharing personal experiences, research, or expert opinions.

II. Body

A. Point 1: Connect with nature for physical health

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that nature is good for physical health.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

B. Point 2: Connect with nature for mental health

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that nature is good for mental health.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

C. Point 3: Connect with nature for environmental sustainability

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that connecting with nature leads to more environmentally sustainable behaviors.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

III. Counterarguments and Rebuttal

A. Counterarguments: Anticipate and address potential objections or counterarguments to your position.

B. Rebuttal: Respond to the counterarguments and explain why your position is still valid.

IV. Conclusion

A. Summary: Restate your thesis statement and briefly summarize your main points.

B. Call to action: Encourage your audience to take action or change their behavior in some way related to the topic.

C. Final thought: End with a memorable statement or a call to action that leaves a lasting impression on your audience.

Remember, the key to a successful persuasive speech is to provide strong evidence and compelling examples to support your argument, address potential objections or counterarguments, and leave your audience with a clear call to action.

Good luck with your speech!

Learn more about Persuasive Speech Writing at

brainly.com/question/31297707

#SPJ4

The AH of the reaction is given as C. -571.6 kJ/mol

The enthalpy change of a reaction (∆H) can be calculated using the formula:

∆H = Σn ∆Hf°(products) - Σn ∆Hf°(reactants),

where n is the stoichiometric coefficient of each substance in the balanced equation.

If we apply this to the reaction of H2(g) and O2(g) forming H2O(l), we get ∆H = -571.6 kJ/mol, where ∆Hf°(H2(g)) = 0 kJ/mol and ∆Hf°(O2(g)) = 0 kJ/mol.

Read more about enthalpies here:

https://brainly.com/question/16985375

#SPJ1

Given the following reaction equation and the enthalpies of formation (∆Hf°) for each substance, what is the ∆H of the reaction?

2 H2(g) + O2(g) → 2 H2O(l)

∆Hf°(H2(g)) = 0 kJ/mol

∆Hf°(O2(g)) = 0 kJ/mol

∆Hf°(H2O(l)) = -285.8 kJ/mol

A. -5335.8 kJ/mol

B. -2815.8 kJ/mol

C. -571.6 kJ/mol

D. 580.7 kJ/mol

A one molal solution is easier to prepare.

A one molal solution is easier to prepare than a one molar solution because it involves a smaller amount of solute. A one molar solution contains one mole of solute per liter of solution, while a one molal solution contains one mole of solute per kilogram of solvent. Since a kilogram of solvent is usually easier to measure than a liter of solution, it is easier to prepare a one molal solution. Additionally, the concentration of a one molal solution is dependent on the mass of solvent, which is more consistent and precise than the volume of solution.

Know more about Molal here:

https://brainly.com/question/26921570

#SPJ11

52 g of hydrogen will produce approximately 1154.75 liters of ammonia at STP.

To solve this problem, we need to use stoichiometry to determine the number of moles of ammonia produced from the given amount of hydrogen.

First, we can convert the mass of hydrogen to moles using its molar mass:

52 g H₂ x (1 mol H₂ ÷ 2.02 g H₂) = 25.74 mol H₂

Next, we can use the balanced chemical equation to determine the number of moles of ammonia produced per mole of hydrogen:

1 mol H₂ produces 2 mol NH₃

So, 25.74 mol H₂ will produce:

25.74 mol H₂ x (2 mol NH₃ ÷ 1 mol H₂) = 51.48 mol NH₃

Finally, we can use the ideal gas law to convert the number of moles of ammonia to its volume at standard temperature and pressure (STP):

51.48 mol NH₃ x (22.4 L/mol) = 1154.75 L NH₃

To learn more about hydrogen follow the link:

brainly.com/question/31018544

#SPJ4

Hi! You asked about ethylene glycol, which is the main ingredient in antifreeze used in car radiators due to its low freezing point. You want to determine the molality of a solution that will cause an 8.26 °C change in the freezing point of water, given that the Kf of water is 1.86 kg/mol°C and i = 1.

To calculate the molality (m), we can use the formula:

ΔTf = i * Kf * m

Where ΔTf is the change in freezing point, i is the van't Hoff factor, Kf is the cryoscopic constant, and m is the molality. We're given ΔTf = 8.26 °C, Kf = 1.86 kg/mol°C, and i = 1.

Rearranging the formula to solve for molality (m):

m = ΔTf / (i * Kf)

Substituting the given values:

m = 8.26 / (1 * 1.86)

m ≈ 4.44 mol/kg

So, the molality of the ethylene glycol solution that will cause an 8.26 °C change in the freezing point of water is approximately 4.44 mol/kg.

Learn more about "Ethylene Glycol": https://brainly.com/question/14469428

#SPJ11

At aphelion, when the planet is farthest from the Sun, its velocity is the slowest in its orbit. Conversely, at perihelion, the point in the orbit where the planet is closest to the Sun, the planet moves fastest.

A planet moves most slowly in its orbit at aphelion. Aphelion refers to the point in a planet's orbit where it is farthest from the Sun.

As a planet orbits the Sun, it experiences gravitational attraction, causing it to accelerate as it gets closer to the Sun and decelerate as it moves away.

Aphelion refers to the point in an object's orbit around the Sun where it is farthest from the Sun. It is the point in an object's elliptical orbit where the distance between the object and the Sun is at its maximum.

To learn more about aphelion, follow the link:

https://brainly.com/question/30583998

#SPJ12

The mass number of an oxygen isotope with nine neutrons is 25.

The mass number is the sum of protons and neutrons in an atom. Oxygen has 8 protons, and with 9 neutrons, the mass number is 8 + 9 = 25.

The given statement provides information about the mass number of a specific oxygen isotope with nine neutrons. The mass number represents the total number of protons and neutrons in an atom. In the case of this oxygen isotope, it is stated that the mass number is 25.

To calculate the mass number, we need to sum the number of protons and neutrons. The statement also mentions that oxygen has 8 protons. Therefore, by adding 9 neutrons to the 8 protons, we obtain the total mass number of 25.

In summary, the statement explains that the mass number of this particular oxygen isotope, which contains nine neutrons, is determined by the sum of the 8 protons and 9 neutrons, resulting in a mass number of 25.

To learn more about neutrons, refer below:

https://brainly.com/question/28992636

#SPJ11

DNA replication is the most energy-intensive process in a cell. Option A is correct.

The replication of DNA requires the unwinding of the double helix structure and the separation of the two strands, which is facilitated by enzymes such as helicases. The replication process also involves the synthesis of new nucleotide strands, which requires the input of energy in the form of ATP (adenosine triphosphate) molecules.

While other cellular processes such as transcription, translation, and lipid catabolism also require energy, DNA replication is particularly energy-intensive due to the large size of the DNA molecule and the complexity of the replication machinery involved.

Additionally, errors in the DNA replication process can lead to mutations that can have serious consequences for the cell and the organism as a whole, so the replication process must be tightly regulated and closely monitored, which also requires energy expenditure.

Hence, A. is the correct option.

To know more about DNA replication here

https://brainly.com/question/21675925

#SPJ4

--The given question is incomplete, the complete question is

"The most energy-intensive process (i.e. requires the most energy) in a cell is A) DNA replication B) carbohydrate synthesis C) transcription D) lipid catabolism. E) translation."--

An atom with too many neutrons relative to protons is said to be unstable and can undergo radioactive decay to become more stable. There are several types of radioactive decay, including alpha decay, beta decay, and gamma decay.

In alpha decay, the unstable atom emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. This results in a new nucleus with two fewer neutrons and two fewer protons.

In beta decay, the unstable atom emits a beta particle, which is either an electron or a positron. When an atom emits an electron, one of its neutrons is converted into a proton, and the atomic number of the atom increases by one. When an atom emits a positron, one of its protons is converted into a neutron, and the atomic number of the atom decreases by one.

In gamma decay, the unstable atom emits a gamma ray, which is a high-energy photon. Gamma decay does not change the number of protons or neutrons in the nucleus but instead releases excess energy.

To know more about radioactive decay refer to-

https://brainly.com/question/1770619

#SPJ11

Answer:

This is thermodynamics.

Using simple thermodynamics operation equation