Answer:C they take millions of years to create
Explanation: Fossil fuels are created basically from the fossils of living organismorganisms and take millions of years to form
Because fossil fuels are made from the remains of ancient plants and other species that existed millions of years ago, they are considered a non-renewable resource. Therefore, the correct option is C.
They are formed as a result of the aggregation and compression of organic matter, including dead plants and bacteria, over a long period of time. Since this geological process takes millions of years to complete, it takes a very long time (compared to human lifetimes) for fresh fossil fuel resources to be generated. Once mined and used up, fossil fuel reserves such as coal, oil and natural gas cannot be replaced over time. Non-renewable resources are those that have a limited supply and take a long time to manufacture.
Therefore, the correct option is C.
Learn more about Non-renewable resources, here:
https://brainly.com/question/30135824
#SPJ4
Four friends are at the beach on a sunny day they noticed the sand is much warmer than the ocean water they wondered that the temperature of these surfaces differed even though they were exposed to the same amount of sunlight
Answer:
The sand is much warmer than the water because water has a higher specific heat, or it takes more energy to change the temperature of water. Since they are absorbing energy from the same place, the sun, the sand will get warmer faster because it takes less energy to change the temperature.
Another reason could be because the water is constantly mixing with the water below it which is not exposed to the sun and because of this the water remains at a lower temperatre. The sand however has the same part exposed to the sun unless an external force, a foot, umbrella, wind, etc comes to move it. So it is able to absorb the sun for longer than the water.
HELP ASAP FOR MY SISTER SCIENCE
Answer:
B.) an elephant having the same trunk sizes and shapes as its parents
Explanation:
an inherited trait is genetically determined. inherited traits are coded in our DNA and hence can be passed on to the next generation.
The measurement 0.41006 gram, rounded to four significant figures, is expressed as...
1) 0.4100 g
2) 0.410 g
3) 0.41 g
4) 0.4101 g
0.4100 g - Rounding to four significant figures retains trailing zeros after the decimal point when followed by a non-zero digit.
Option (1) is correct.
In scientific notation, significant figures are digits that carry meaningful information about the precision of a measurement. When rounding a number to four significant figures, we consider the digits up to the fourth digit from the left (including trailing zeros after the decimal point).
In the given measurement, 0.41006 gram, we start counting from the left:
The first significant figure is "4."
The second significant figure is "1."
The third significant figure is "0."
The fourth significant figure is "0."
The fifth digit "6" is beyond the fourth significant figure, so we ignore it when rounding.
Since the fourth significant figure is "0," and it's followed by a digit greater than or equal to 5 (in this case, "6"), we round up the last significant figure. Hence, the measurement rounded to four significant figures is 0.4100 grams (option 1).
To learn more about trailing zeros here
https://brainly.com/question/11745676
#SPJ2
What happens when a piece of vulcanized rubber is soaked in solvents: ether, n-hexane, gasoline?
Answer:
The chemical equation when Hexane is subjected to strong heat in the absence of air
what will happen if we put iron nails with sodium bicarbonate in a closed flask?
Answer:
You will be able to watch the slow dissolution of the nail (probably a steel nail and not iron) and the change in colour of the solution.
Explanation:
I believe not 100% sure.
The heat of vaporization is 540 calories per gram. What is the minimum number of
calories needed to change 40.0 grams of water
at 100°C to steam at the same temperature and
pressure?
The minimum number of calories needed to change 40 g of water at 100°C to steam is 21600 calories
Data obtained from the question Mass of water (m) = 40 gHeat of fusion (ΔHv) = 540 cal/gHeat (Q) =?The heat needed to vaporise the water at 100 °C can be obtained as follow:
Q = m × ΔHv
Q = 40 × 540
Q = 21600 calories
Learn more about heat transfer:
https://brainly.com/question/6363778
Why can light be treated like a particle?
O A. Some wavelengths are visible and some are not.
B. Light comes in chunks of energy called photons.
C. Light waves can bounce off of some surfaces.
D. Light can be separated into a spectrum of colors.
A light can be treated like a particle because light comes in chunks of energy called photons.
What are photons?Photons are the small packets of energy and its energy will be represented by the following equation as:
E = hυ, where
h = plank's constant
υ = frequency
Light will be treated like a wave as well as of particle due to presence of this type of energy.
Hence correct statement is light comes in chunks of energy called photons.
To know more about photons, visit the below link:
https://brainly.com/question/1844674
#SPJ1
Answer:
B. Light comes in chunks of energy called photons.
Why are metals so ductile?
Answer:
throughout the metallic structure allowing the atoms to slide past each other. This sliding is why metals are ductile and malleable. Ionic compound must break bonds to slide past one another, which causes the ionic material to split and crack.
Explanation:
Hope this helps loves mark me brianlest x
Gastric acid plays a key role in the digestion of proteins by activating digestive enzymes and often has a pH value in the range of 1.5 to 3.5. If the pH of the acid at a given time is found to be 1.25, calculate the molarity of the gastric acid juice.
If the pH of the acid at a given time is found to be 1.25, then the molarity of the gastric acid juice is 0.056M.
What is pH?pH is define as the negative logarithm of the concentration of H⁺ ions present in any solution and it will be represented as:
pH = -log[H⁺]
Concentration will be present in the form of molarity and pH value for gastric acid is given 1.25 means it is strong acid as it completely dissociates into their ions.
Required equation for calculation will be:
[H⁺] = [tex]10^{-pH}[/tex]
[H⁺] = [tex]10^{-1.25}[/tex]
[H⁺] = 0.056 M
Hence molarity of the gastric acid juice is 0.056M.
To know more about pH & molarity, visit the below link:
https://brainly.com/question/27298208
#SPJ1
The reaction of aluminum with chlorine gas is shown.
2Al+3Cl2⟶2AlCl3
Based on this equation, how many molecules of chlorine gas are needed to react with 20 aluminum atoms?
number of Cl2 molecules:
How many units of aluminum chloride (AlCl3) can be produced from 20 aluminum atoms?
number of AlCl3 units:
Answer:
See below
Explanation:
The equation shows Al / Cl = 2/3 or 3/2 Al = Cl
3/2(20) = 30 Cl atoms needed
The equation shows a one-to-one relationship between Al and AlCl3
produced so if you use 20 Al atoms you get 20 AlCl3 molecules
The number of Cl₂ molecules needed to react with 20 aluminum atoms is approximately 11.97, and the number of units of aluminum chloride (AlCl₃) produced from 20 aluminum atoms is approximately 9.98.
Let's first calculate the number of molecules of chlorine gas (Cl₂) needed to react with 20 aluminum (Al) atoms:
From the balanced chemical equation: 2Al + 3Cl₂ ⟶ 2AlCl₃
The stoichiometric ratio between aluminum and chlorine gas is 2:3. This means for every 2 moles of aluminum, we need 3 moles of chlorine gas.
1 mole of any substance contains Avogadro's number (6.022 × 10²³) of particles (atoms, molecules, or ions).
Number of moles of aluminum (Al) atoms = 20 atoms / Avogadro's number
Number of moles of aluminum (Al) atoms = 20 / 6.022 × 10²³
Now, to find the number of molecules of chlorine gas (Cl₂) needed, we use the stoichiometric ratio:
Number of moles of chlorine gas (Cl₂) needed = (3/2) × Number of moles of aluminum (Al) atoms
Number of moles of chlorine gas (Cl₂) needed = (3/2) × (20 / 6.022 × 10²³)
Number of moles of chlorine gas (Cl₂) needed ≈ 1.988 × 10⁻²³ moles
Since 1 mole of any substance contains Avogadro's number of molecules, the number of molecules of chlorine gas (Cl₂) needed will be approximately:
Number of Cl₂ molecules ≈ 1.988 × 10⁻²³ × 6.022 × 10²³ ≈ 11.97
Now, let's calculate the number of units of aluminum chloride (AlCl₃) that can be produced from 20 aluminum (Al) atoms:
From the balanced chemical equation: 2Al + 3Cl₂ ⟶ 2AlCl₃
The stoichiometric ratio between aluminum and aluminum chloride (AlCl₃) is 2:2. This means for every 2 moles of aluminum, we get 2 moles of aluminum chloride.
Number of moles of aluminum chloride (AlCl₃) produced = Number of moles of aluminum (Al) atoms / 2
Number of moles of aluminum chloride (AlCl₃) produced = 20 / 2 / Avogadro's number
Number of moles of aluminum chloride (AlCl₃) produced ≈ 20 / (2 × 6.022 × 10²³)
Number of moles of aluminum chloride (AlCl₃) produced ≈ 1.658 × 10⁻²³ moles
Since 1 mole of any substance contains Avogadro's number of units (molecules or formula units), the number of units of aluminum chloride (AlCl₃) produced will be approximately:
Number of AlCl₃ units ≈ 1.658 × 10⁻²³ × 6.022 × 10²³ ≈ 9.98
Therefore, the number of Cl₂ molecules needed to react with 20 aluminum atoms is approximately 11.97, and the number of units of aluminum chloride (AlCl₃) produced from 20 aluminum atoms is approximately 9.98.
Lear more about aluminum from the link given below.
https://brainly.com/question/28989771
#SPJ2
Calculate the volume in mL of 0.589 M NaOH needed to neutralize 52.1 mL of 0.821 M HCl in a titration.
Answer:
72.6 mL
Explanation:
A quick way to solve this titration problem when you have a monoprotic acid is to use the Dilution equation, M1V1=M2V2.
.589(x)=.821(52.1)
X=72.6 mL
What causes the change in pressure when a basketball is pumped up?
Answer:The more air we pump into them the more squished the air has to become to fit inside the ball. As the air becomes more squished, it pushes more on the inside of the ball. When you have a ball which is more inflated, there is more force pushing on the inside of that ball. (We call that air pressure).
Explanation:
The amount of gas causes the change in pressure when a basketball is pumped up. The force delivered perpendicularly to an object's surface per unit area across where that force is dispersed is known as pressure.
What is pressure?The force delivered perpendicularly to an object's surface per unit area across where that force is dispersed is known as pressure (symbol: p / P). The pressure proportional to the surrounding air is known as gauge pressure, also spelt gauge pressure[a].
Pressure is expressed using a variety of units. Some of them come from dividing a unit of force by a measure of area; the pound-force / square inch and the newton every square metre (N/m2) are two examples. The standard international measurement of pressure, a pascal (Pa), is another. The amount of gas causes the change in pressure when a basketball is pumped up.
Therefore, the amount of gas causes the change in pressure when a basketball is pumped up.
To know more about pressure, here:
https://brainly.com/question/29341536
#SPJ7
Why is Iceland spreading apart? Be specific and detailed.
Answer: movement of Tectonic plates
Explanation: The tectonic plates are moving apart, on to the west and one to the east. As the plates move apart, volcanoes erupt and rift valleys are filled. During these events, earthquakes are common and magma rises up, creating a new oceanic crust.
how many mm Hg is 0.751 atm
Answer:
570.76 mmHg
Explanation:
multiply the atm value by 760.0 mmHg / atm.
760*.751=570.76
chemteaminfo
As a pilot is flying in level flight at 9,500 ft, the altimeter in the instrument panel is set to a pressure of 29.48 mm of Hg. As the aircraft travels along its route, the outside air temperature changes from 23.0°C to 9.0° C. To what pressure does the pilot need to reset the altimeter in order for the altimeter to indicate the aircraft's true altitude?
Answer:
from the ideal gas law, P2 /P1 = T2 /T1 for the same volume and quantity of gas. P2 = (758 mmHg) (45 +273 K) / (15 +273K) = 837 mmHg.
Explanation:
the force that holds the atoms together is referred to as a
How are sensible heat and latent heat different
Motivation that is physical and can be touched like a trophy or a medal is:
A. Tangible
B. Intrinsic
C. Intangible
D. Extrinsic
Answer:
Tangible
Explanation:
Tangible alone means it is "perceptible by touch," meaning you physically observe the object with your sense of touch.
Having tangible motivation is like working for money or a trophy.
A cleaning solution has a hydroxide ion concentration of 2.5 x 104 mol/L. Which of the following
statements are correct?
a) The solution has a pH of 3.6
b) The solution is basic.
c) The solution has a pH of 10.4
d) The solution is acidic.
O a and b
Ob and d
4
Original text
c and b
Contribute a bett
Od and c
A cleaning solution with an OH⁻ concentration of 2.5 × 10⁻⁴ mol/L, has a pH of 10.4 and is basic (options b and c).
How can we determine the acidity or basicity of a solution?If pH < 7, the solution is acid.If pH = 7, the solution is neutral.If pH > 7, the solution is basic.Step 1. Calculate the pOH of the solution.The hydroxide ion concentration is 2.5 × 10⁻⁴ mol/L.
pOH = -log [OH⁻] = log (2.5 × 10⁻⁴) = 3.6
Step 2. Calculate the pH of the solution.We will use the following expression.
pH + pOH = 14
pH = 14 - pOH = 14 - 3.6 = 10.4
Since pH > 7, the solution is basic.
A cleaning solution with an OH⁻ concentration of 2.5 × 10⁻⁴ mol/L, has a pH of 10.4 and is basic (options b and c).
Learn more about pH here: https://brainly.com/question/172153
#SPJ1
You are enjoying an ice cream cone on a warm Arizona summer day. As you eat the ice cream cone, drops of melted ice cream fall to the ground.
Explain how gravitational potential energy, kinetic energy, and heat are involved in this scenario.
Answer in complete sentences.
Answer:
the ice cream falls down..therefore, it's kinetic energy while the melting part is heat energy
As the chain length of a hydrocarbon is increased the heat of vapourization
increases because
Select one:
O a. the molecules have greater weight
O b. there are more hydrogens available for hydrogen bonding
c. the number of dipole-dipole interactions increases
O d. the strength of the London forces increases with molecular size
the carbon-carbon bonds become more polar
Answer:
Answer is d, strength of London forces increases with molecular size.
Explanation:
Dispersion forces are the forces preesnt between all intermingling atoms, molecules and particles. Dispersion forces are the weakest intermolecular force, but they build up with the addition of more atoms, molecules or particles. Heat of vapourisation or boiling point is dependant on the energy required to break the bonds within the molecule/hydrocarbon in question. The build up of dispersion forces create greater intermolecular forces, which make the boiling of a substance more difficult. Hence increased hydrocarbon chain length, and the related increased eat of vapourisation is due to how the strength of the London/Dispersion forces increases with molecular size
A constant current of 0.350 A is passed through an electrolytic cell containing molten CrCl₂ for 21.7 h. What mass of Cr(s) is produced? The molar mass of chromium is 52.0 g/mol. Provide your answer rounded to 3 significant digits.
An electrochemical cell can generate or use electrical energy. The mass of solid chromium that will be deposited on the electrochemical plate is 7.17 gm.
What is current?Current in an electrochemical cell is the ratio of the quantity of electricity in columns and time in seconds.
Given,
Current (I) = 0.350 A
Time = 21.7 hours
Molar mass of chromium = 52.0 g/mol
First time is converted into seconds:
1 hour = 3600 seconds
21.7 hours = 76020 seconds
The quantity of electricity flowing in the electrochemical solution is calculated as:
[tex]\begin{aligned} \rm Q & = \rm It\\\\& = 0.350 \times 76020 \\\\& = 26607\;\rm C \end{aligned}[/tex]
Electricity required for depositing 1 mole or 52.0 g chromium is calculated as:
In electrochemical solution, chromium chloride is dissociated as:
[tex]\rm CrCl_{2} \rightarrow Cr^{2+} + 2 Cl^{-} \\\\\rm Cr^{2+} +2 e^{-} \rightarrow Cr[/tex]
Two moles of electrons are needed to deposit 52.0 g of chromium.
If, 1 electron = 96500 C
Then, 2 electron = 193000 C
The mass of chromium deposited is calculated as:
193000 C = 52 g chromium
So, 26607 C = [tex]\dfrac{26607 \times 52}{193000} = 7.17 \;\rm gm[/tex]
Therefore, 7.17 gm of chromium is produced.
Learn more about an electrochemical cell here:
https://brainly.com/question/20355190
#SPJ1
Question 2 of 30
A pamphlet about a fuel that contains up to 15% ethanol claims that the fuel
produces less of some types of pollution. The amount of ethanol in the fuel
and the pollutants are regulated by the government. What can you not infer
from this information?
Answer:
the awnser is d the other fuel produce more pollutants
Explanation:
because right out the bat we know that other fuels produce more than a 15 percent fuel so the right awnser is d
The Second Law of Thermodynamics states that:
Select one:
Answer:
In the total entropy of an isolated system, the thermal energy per unit temperature that is unavailable for doing useful work can never decrease.
Which are the correct products for these reactants HCl + NaOH -->
The products obtained from the reaction between HCl and NaOH are NaCl and H₂O
What is a chemical equationChemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to write equationThe reaction between HCl and NaOH is a neutralization reaction which produces salt and water as shown below
HCl + NaOH → NaCl + H₂O
Products => NaCl and H₂O
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ1
Question
Why does corn pop in the microwave?
Answer:
it pops because the heat and water inside of it
Explanation:
Answer:
when the corn is heated, the water turns into steam, which builds pressure inside the kernel. When it can no longer contain the pressure it pops.
Explanation:
Convert 55 m3 to liters
Explanation:
hope it help you thanku byy.
.mark it brainlist
Which of the following amines has the lowest boiling point?
a. C4H9NH2
w
O b. C2H5NHC2H
O c. C2H5N(CH3)2
O d. C3H7NHCH3
Its b beacuse if you C4 its a high active poly faber
Explanation:
Im right
need help please :'((((((((((
Answer:
you work out the moles by finding the grand formula mass them you divide the actual mass by the grand formula mass: 25/160 (my grand formula mass is probably slightly different from yours) which I got 0.15625 then I times it by 32(O2) and I got 5. but my periodic table is different. it's whole numbers. ;-)
Explanation:
4.44
Consider the following equilibrium: HCOOH(aq) + H2O(l) ↔ HCOO-(aq) + H3O+(aq). How will the addition of a small amount of NaOH affect the equilibrium?
A. It will shift to the left.
B. It will shift to the right.
C. It won't be affected.
D. More information is needed.