Atomic size is significantly influenced by the growth of nuclear charge over time and the expansion of electron shells down the group.
Atomic size is determined by the distance between the nucleus and the outermost electron shell. The number of electrons in the outermost shell, also known as the valence electrons, plays a crucial role in determining atomic size.
Down the group, the number of electron shells increases, leading to an increase in atomic size. The increased distance between the nucleus and the valence electrons weakens the attractive force, making it easier for the outermost electrons to move further from the nucleus.
Across a period, atomic size decreases due to an increase in nuclear charge. As the number of protons in the nucleus increases, the attractive force on the valence electrons increases, making it harder for the electrons to move away from the nucleus. This results in a decrease in atomic size across the period.
Overall, the increase in electron shells down the group and increase in nuclear charge across the period have a significant impact on atomic size.
To learn more about atomic size refer to:
brainly.com/question/1127028
#SPJ4
single displacement or NR (no reaction)
Lead (II) + Nitric acid → ? + ? (Product)
Answer:
There will be a displacement reaction, with Lead (II) + Nitric acid → Lead (II) Nitrate + Hydrogen.
Explanation:
In the reactivity series, Lead is more reactive than Hydrogen (within the nitric acid) meaning that it will displace it forming Lead(II) Nitrate and Hydrogen gas.
This leads to the equation:
Lead (II) + Nitric acid → Lead (II) Nitrate + Hydrogen
Pb (s) + 2HNO3 (aq) → Pb(NO3)2 (aq) + H2 (g)
If the nitric acid was dilute (which the question does not mention, so shouldn't be mentioned) however it will form:
Lead (II) + Nitric acid → Lead (II) Nitrate + Nitrogen Dioxide + Water
Pb (s) + 4HNO3 (aq) → Pb(NO3)2 (aq) + 2NO2 (g) + 2H2O (l)
Hope this helps!!!
what experimental evidence do you have that 1-bromobutane is the major product, instead of 2-bromobutane?
There are a number of experimental findings that show 1-bromobutane to be the major product over 2-bromobutane like kinetics of reaction, stereochemistry of the reaction and quantitative comparison of the reaction rates.
First, the kinetics of the reaction. Because the SN2 mechanism requires the nucleophile to attack the primary carbon at a 180 degree angle, 2-bromobutane will be a bit slower to react than 1-bromobutane. As a result, when the reaction is allowed to run for a certain amount of time, more 1-bromobutane is formed. Second, a quantitative comparison of the reaction rates of the two substrates.
Because the SN2 reaction mechanism is so sensitive to steric hindrance, a quantitative comparison of the reaction rates of the two substrates could be carried out to determine which one is the better substrate. This would be a direct experimental measurement of the relative reactivity of the two substrates, and would show that 1-bromobutane is more reactive than 2-bromobutane.
Finally, the stereochemistry of the reaction products. When a stereocenter is created during an SN2 reaction, the resulting product is always an enantiomeric pair of molecules. Because the SN2 reaction requires the nucleophile to attack the primary carbon from the back side, the product will be a pair of enantiomers with opposite stereochemistry.
If 1-bromobutane is the major product, then the product will be a pair of enantiomers with opposite stereochemistry. If 2-bromobutane is the major product, then the product will be a pair of enantiomers with the same stereochemistry. So, by analyzing the stereochemistry of the product, we can determine which substrate is the better SN2 substrate.
To know more about 1-bromobutane, refer here:
https://brainly.com/question/30841540#
#SPJ11
2. What would the volume of air inside a 40. 0 L tire under 218 kPa of pressure occupy if it all escaped into a balloon at 101. 3 kPa?
The volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure is 86.1 L.
To calculate the volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure, we can use the following formula, known as Boyle's law:
P₁V₁ = P₂V₂
where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.
In this case, we know:
P₁ = 218 kPa
V₁ = 40.0 L
P₂ = 101.3 kPa
V₂ = ?
Now we can rearrange the formula to solve for V₂:
V₂ = (P₁ x V₁) / P₂
Substituting the values, we get:
V₂ = (218 kPa x 40.0 L) / 101.3 kPa
= 86.1 L
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
In the titration of 25.0 mL of 0.1 M CH3COOH with 0.1 M NaOH, how is the pH calculated after 8 mL of titrant is added?
a The pH is 14.
b The pH is calculated using the H-H equation for a buffer solution, using the ratio of the concentrations of the weak base and the weak acid, and the pKaof the acid.
c The pH is 1.
d The pH is calculated by determining the concentration of weak conjugate acid present in the solution, using an ICE table to calculate the proton concentration present after hydrolysis, and taking the negative log of the result.
e The pH is based on the concentration of protons present in the solution, which is equal to the original concentration of the base.
f The pH = pKa of the acid.
g The pH is 7.
h The pH is calculated by determining the concentration of weak conjugate base present in the solution, using an ICE table to calculate the hydroxide ion concentration present after hydrolysis, subtracting pOH from 14, and taking the negative log of the result.
i The pH is calculated by determining the concentration of leftover hydroxide ions in the solution, subtracting pOH from 14, and taking the negative log of the result.
When 8 mL of titrant is added to the titration of 25.0 mL of 0.1 M CH3COOH with 0.1 M NaOH,the pH is calculated by determining the concentration of weak conjugate base present in the solution, using an ICE table to calculate the hydroxide ion concentration present after hydrolysis, subtracting pOH from 14, and taking the negative log of the result.
What is a titration?
Titration is a technique of quantitative analysis used to determine the concentration of an unknown solution by reacting it with a standard solution of known concentration called a titrant.Titration curve
The plot of the pH of the solution as the volume of titrant added to it is referred to as the titration curve.
The titration curve's endpoints indicate the neutralization point, where the moles of acid and base are equal. The equivalence point is when the amount of acid is equal to the number of moles of base.
A weak acid, CH3COOH, with a concentration of 0.1 M is taken, which will form a buffer solution with NaOH.
When 8 ml of NaOH is added to it, it will neutralize a portion of CH3COOH and produce its conjugate base, CH3COO-. NaOH + CH3COOHCH3COONa+ + H2OL Let's assume that "x" moles of CH3COOH have been neutralized by NaOH. So, the remaining moles of CH3COOH will be "0.1-x."
The moles of CH3COO- formed in the reaction are equal to "x" because they are formed by the neutralization of "x" moles of CH3COOH. So, the molecular weight of CH3COO- = x/1000 (1 mL = 1 cm3).
The initial number of moles of CH3COOH in the solution = 0.1 x 25/1000 = 0.0025 mol
We can obtain the pH of the solution by first calculating the number of moles of CH3COOH that have been converted to CH3COO and then using the weak acid dissociation constant (Ka) to calculate the pH of the resulting buffer solution.
Then, we can determine the hydroxide ion concentration using the relation: [OH-] = Kb/[CH3COO-] and calculate pOH by taking the negative logarithm of the OH- concentration.
Finally, we can subtract pOH from 14 to obtain the pH of the buffer solution.
pH = 14 - pOH Please note that the pOH of a buffer solution can be calculated using the Henderson-Hasselbalch equation.
The correct option is h.
To know more about the titrant https://brainly.com/question/30836835
#SPJ11
where are positively charged particles found in an atom? A. protons B. neutrons C. electrons D. all of these choices
The correct option is D. all of these. Construction of an atom. The protons (positive charge) and neutrons (impartial charge) are tracked down together in the small nucleus at the focal point of the atom.
The electrons (negative charge) involve an enormous, round cloud encompassing the nucleus.
An atom comprises two locales. The first is the little atomic nucleus, which is in the focal point of the atom and contains positively charged particles called protons and nonpartisan, uncharged, particles called neutrons. The second, a lot bigger, locale of the atom is a "cloud" of electrons, negatively charged particles that circle around the nucleus. The fascination between the positively charged protons and negatively charged electrons keeps the atom intact. Most atoms contain each of the three of these sorts of subatomic particles — protons, electrons, and neutrons. Hydrogen (H) is a special case since it ordinarily has one proton and one electron, yet no neutrons. The quantity of protons in the nucleus figures out which component an atom is, while the quantity of electrons encompassing the nucleus figures out which sort of responses the atom will go through. The three sorts of subatomic particles are delineated beneath for an atom of helium — which, by definition, contains two protons.
to know more about atoms click here:
https://brainly.com/question/17545314
#SPJ4
what type of orbitals overlap to form the n-h bond in nh3?
The three hydrogen atoms in an [tex]NH_{3}[/tex] hybridization will be centred around the nitrogen atom. Only the s orbitals of the hydrogen atoms overlap those sp3 orbitals.
An sp3 orbital in N crosses over with a s orbital in H to form the N-H bond. The second option is the proper response. This is because the nitrogen atom in [tex]NH_{3}[/tex] has four electron domains that together create four sp3 orbitals.
An sp3 orbital in N crosses a s orbital in H to form the N-H bond.
Tetrahedral in shape, the nitrogen atom in [tex]NH_{3}[/tex] contains four hybridised sp3 orbitals that house its four valence electrons. A hydrogen atom's valence electron is situated in a s orbital. The N-H bond is produced when the sp3 hybrid orbital of a nitrogen atom and the s orbital of a hydrogen atom overlap.
This overlap is due to the covalent bond that is created when nitrogen and hydrogen share electrons. Accurate orbital overlap that leads to the formation of the N-H bond in [tex]NH_{3}[/tex]
To know more about nitrogen atom, click the below link
brainly.com/question/2396742
#SPJ4
co, co2, so2, no, and no2, most hydrocarbons, and most suspended particles which are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds are labeled as what general category?
The general category for compounds like CO, CO2, SO2, NO, NO2, most hydrocarbons, and most suspended particles which are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds is: air pollutants.
Air pollutants are any type of gaseous, solid, or liquid substance that are released into the atmosphere. These pollutants come from a variety of sources including industrial facilities, vehicles, and the burning of fossil fuels. They can also be naturally occurring and caused by events like volcanic eruptions.
Pollutants such as CO, CO2, SO2, NO, NO2, hydrocarbons, and suspended particles can enter the atmosphere in a variety of ways. In many cases, they can be released directly from an industrial facility or a vehicle. They can also be released as a result of chemical reactions that occur in the atmosphere or from other sources such as the burning of fossil fuels.
Once in the atmosphere, air pollutants can mix vertically and horizontally with other substances and be dispersed and diluted by churning. This churning process can cause pollutants to react with other compounds such as ozone and form secondary pollutants. These secondary pollutants are often more harmful than the original pollutants and can contribute to smog and acid rain.
Air pollution can have negative impacts on both human health and the environment. Some of these impacts include increased respiratory problems, decreased visibility, and reduced crop yields. To reduce the amount of air pollution, governments and businesses are working to reduce emissions and promote cleaner technologies.
In conclusion, compounds such as CO, CO2, SO2, NO, NO2, hydrocarbons, and suspended particles that are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds are categorized as air pollutants. These pollutants can cause a variety of health and environmental issues if not managed properly.
To know more about hydrocarbons refer here:
https://brainly.com/question/30907363#
#SPJ11
what is the mass of 2.00 moles of ca(oh)2? group of answer choices 122.5 g 222.4 g 148.2 g 74.1 g 56 g
The mass of 2.00 moles of Ca(OH)₂ is 148.2 g.
What is a mole?A mole is a unit of measurement used in chemistry to represent particles, such as atoms, molecules, or ions. A mole is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12.
Moles and mass are directly proportional to each other since they both represent the quantity of substance.
Moles = Mass/Molar mass
Mass = Moles x Molar mass
The molar mass of Ca(OH)₂ is calculated as follows:
Molar mass of Ca = 40.1 g/mol
Molar mass of O = 16.0 g/mol
Molar mass of H = 1.0 g/mol2 atoms of oxygen, 2 atoms of hydrogen, and 1 atom of calcium are present in Ca(OH)₂.
Therefore, the molar mass of Ca(OH)₂ = 40.1 g/mol + 2(16.0 g/mol) + 2(1.0 g/mol) = 74.1 g/mol
The mass of 2.00 moles of Ca(OH)₂ = Moles × Molar mass= 2.00 × 74.1= 148.2 g
Hence, 148.2 g is the mass of 2.00 moles of Ca(OH)₂.
Learn more about moles on:
https://brainly.com/question/29367909
#SPJ11
how many grams of calcium carbonate are necessary to weigh out 9.50 moles?
The molar mass of calcium carbonate (CaCO₃) is approximately 100.09 g/mol. The gram is commonly used to measure the mass of small objects, such as food items, coins, and jewelry.
What is a gram ?A gram is a unit of mass in the metric system, abbreviated as It is defined as one-thousandth of a kilogram, which is the base unit of mass in the International System of Units (SI).
It is also used in scientific measurements, such as in chemistry and physics, to express the mass of atoms, molecules, and other particles.
To calculate the mass of 9.50 moles of calcium carbonate, we can use the following formula:
mass = moles x molar mass
Substituting the given values, we get:
mass = 9.50 moles x 100.09 g/mol
mass = 950.45 g
Therefore, 9.50 moles of calcium carbonate would have a mass of approximately 950.45 grams.
To know more about mass visit :
brainly.com/question/12127497
#SPJ1
enantiomers vs diastereomers vs constitutional isomers
Enantiomers are mirror images of each other, Diastereomers are molecules with similar but not identical structures and Constitutional isomers are molecules with completely different structures but similar molecular formulas.
Enantiomers, diastereomers, and constitutional isomers are three different types of molecules that differ in their molecular structures. Enantiomers are molecules that are mirror images of each other; they are non-superimposable and cannot be converted into each other without breaking the chemical bonds.
Diastereomers are molecules with similar, but not identical, structures; they are non-superimposable and can be converted into each other without breaking the chemical bonds. Constitutional isomers are molecules with completely different chemical structures, but similar or identical molecular formulas.
To differentiate between enantiomers, diastereomers, and constitutional isomers, one must consider both their structural and stereochemical properties. Enantiomers have identical physical and chemical properties, except for their optical activity.
Diastereomers also have identical physical and chemical properties, but their stereochemistry is different from each other. Constitutional isomers differ in both their physical and chemical properties, as well as in their stereochemistry.
In conclusion, enantiomers are mirror images of each other, diastereomers are molecules with similar but not identical structures and constitutional isomers are molecules with completely different structures but similar molecular formulas.
To know more about Enantiomers refer here:
https://brainly.com/question/30401546#
#SPJ11
What is the percent hydrogen (H) by weight of
a solution containing 53.5 mL of CH₂COCH?
The density of acetone is 0.788 g/mL.
The first step to calculate the percent hydrogen by weight of the given solution is to determine the mass of hydrogen in the solution.
CH₂COCH is the molecular formula for acetone, which has a molecular weight of 58.08 g/mol. It has a molecular structure of C3H6O, which means it has 6 hydrogen atoms in its structure.
To determine the amount of acetone present in the solution, we need to use its density. Given that the density of acetone is 0.788 g/mL, the mass of acetone in 53.5 mL of the solution can be calculated as follows:
Mass of acetone = Volume of solution × Density of acetone
Mass of acetone = 53.5 mL × 0.788 g/mL
Mass of acetone = 42.108 g
Now that we know the mass of acetone in the solution, we can calculate the mass of hydrogen present in the solution.
Mass of hydrogen = Number of hydrogen atoms × Atomic weight of hydrogen × Number of moles of acetone
Mass of hydrogen = 6 × 1.008 g/mol × (42.108 g / 58.08 g/mol)
Mass of hydrogen = 2.744 g
Finally, to calculate the percent hydrogen by weight, we divide the mass of hydrogen by the total mass of the solution and multiply by 100.
% hydrogen by weight = (Mass of hydrogen / Total mass of solution) × 100
% hydrogen by weight = (2.744 g / 42.108 g) × 100
% hydrogen by weight = 6.51%
Therefore, the percent hydrogen by weight of the given solution is 6.51%.
To know more about hydrogen, visit :
https://brainly.com/question/28937951
#SPJ1
a 100.0 ml sample of 0.18 m hcl is titrated with 0.27 m naoh. what is the ph of the solution after the addition of 30.0 ml of naoh?
The pH of the solution after the addition of 30.0 ml of 0.27 M NaOH in titration is 1.43.
To find the pH of a solution, we use the formula given below:
pH = -log [H+]
where [H+] denotes the concentration of H+ ions (hydrogen ions).
This formula is based on the fact that pH is a measure of the acidity or basicity of a solution. It is the negative logarithm of the hydrogen ion concentration.
Therefore, the pH scale ranges from 0 to 14. The pH scale ranges from 0 to 14, with 7 representing neutral. pH < 7 is acidic, while pH > 7 is basic (alkaline).
Steps to find the pH of the solution
Step 1: Calculate the number of moles of HCl present in the given solution:
moles of HCl = Molarity × volume (in liters)
= 0.18 mol/L × 0.1000 L
= 0.018 mol
Step 2: Calculate the number of moles of NaOH added to the solution:
moles of NaOH = Molarity × volume (in liters)
= 0.27 mol/L × 0.0300 L
= 0.0081 mol
Step 3: Calculate the total number of moles of NaOH after it has been added to the solution:
moles of NaOH = 0.0081 mol + excess NaOH (due to the reaction with HCl)
Step 4: Calculate the number of moles of HCl that reacted with NaOH:
moles of HCl reacted with NaOH = 0.0081 mol (since NaOH and HCl react in a 1:1 ratio)
Step 5: Calculate the number of moles of HCl remaining after the reaction:
moles of HCl remaining = 0.018 mol - 0.0081 mol = 0.0099 mol
Step 6: Calculate the concentration of H+ ions in the solution:
[H+] = moles of H+ / volume (in liters)
= 0.0099 mol / 0.1000 L
= 0.099 mol/L
Step 7: Calculate the pH of the solution:
pH = -log [H+] = -log (0.099) = 1.043
Note: The final pH should be corrected for the dilution of the solution due to the addition of NaOH.
Therefore, pH would be 1.43.
To know more about titration, refer here:
https://brainly.com/question/2728613#
#SPJ11
2. State a chemical test you could perform to distinguish between unlabelled samples of the following
solutions. Give the expected observations.
a) sodium sulfate & calcium nitrate
b) sodium sulfate & sodium nitrate
c) strontium nitrate & strontium hydroxide
d) barium chloride & lithium chloride
3. Compound A gives a lilac flame test colour and produces a white precipitate when added to a solution
of barium chloride. Identify compound A.
Answer:
2. Chemical tests to distinguish between unlabelled samples of the following solutions and their expected observations are:
a) Sodium sulfate and calcium nitrate: Add dilute hydrochloric acid to the unknown solution. Calcium nitrate will produce a white precipitate while sodium sulfate will not produce any precipitate.
b) Sodium sulfate and sodium nitrate: Add silver nitrate solution to the unknown solution. Sodium nitrate will produce a white precipitate of silver chloride while sodium sulfate will not react.
c) Strontium nitrate and strontium hydroxide: Add dilute hydrochloric acid to the unknown solution. Strontium hydroxide will produce a white precipitate while strontium nitrate will not produce any precipitate.
d) Barium chloride and lithium chloride: Add a few drops of dilute sulfuric acid to the unknown solution, followed by a few drops of a solution of potassium dichromate. Barium chloride will produce a green color while lithium chloride will not show any color.
3. Compound A giving a lilac flame test color and producing a white precipitate when added to a solution of barium chloride indicates the presence of potassium ion (K+). Therefore, compound A is most likely potassium chloride (KCl).
Chemical reaction for : 2 GsHs + Fe -> Fe(CsH5)2
The chemical reaction given is not balanced and there is no clear information about the state of reactants and products. However, based on the given information, we can attempt to balance the equation and assume that GsHs represents a hydrocarbon with formula CxHy.
Assuming that GsHs is ethene (C₂H₄), the balanced equation would be:
2 C₂H₄(g) + Fe(s) → Fe(C₂H₅)₂(s)
In this equation, two molecules of ethene react with one atom of iron to produce one molecule of diethyl iron. The state symbols indicate that ethene is in gaseous form, iron is in solid form, and diethyl iron is in solid form.
It's important to note that the actual reaction and balanced equation may vary depending on the actual identity of GsHs and additional experimental conditions such as temperature and pressure.
To learn more about chemical equation refer to:
brainly.com/question/28294176
#SPJ4
A piece of dry ice (solid carbon dioxide) with a mass of 28. 8 g sublimes (converts from solid to gas) into a large balloon. Assuming that all of the carbon dioxide ends up in the balloon, what is the volume of the balloon at 22 °C and a pressure of 742 mmHg?
If all of the carbon dioxide is absorbed by the balloon, its volume is 0.0175 L, or 17.5 mL.
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of carbon dioxide in the dry ice sample. We can do this by dividing the mass of the dry ice by its molar mass. The molar mass of carbon dioxide is 44.01 g/mol.
n = 28.8 g / 44.01 g/mol = 0.654 mol
Next, we need to determine the volume of the balloon. Since the carbon dioxide is a gas, we can use the ideal gas law to solve for the volume of the gas.
V = nRT/P
Before we can substitute the values into the equation, we need to convert the temperature to Kelvin. To do this, we add 273.15 to the Celsius temperature.
T = 22 °C + 273.15 = 295.15 K
Substituting the values into the equation, we get:
V = (0.654 mol)(0.08206 L·atm/mol·K)(295.15 K)/(742 mmHg)
Note that we have converted the pressure from mmHg to atm by dividing by 760, which is the number of mmHg per atm.
V = 0.0175 L
Therefore, the volume of the balloon is 0.0175 L, or 17.5 mL, assuming that all of the carbon dioxide ends up in the balloon.
To learn more about ideal gas law refer to:
brainly.com/question/28257995
#SPJ4
what key absorbance indicative of starting material 2-methylcyclohexanone should be absent? give wavenumber, bond type and functional group.
The key absorbance indicative of starting material 2-methyl cyclohexanone that should be absent is the carbonyl stretch at around [tex]1710-1735 cm^{-1}.[/tex] , the bond type is C=O and the functional group is Ketone.
Infrared spectroscopy is a useful technique in identifying functional groups in organic compounds. The carbonyl stretch, which is typically found at 1710-1735 cm^-1, is a characteristic absorption band for ketones and aldehydes. Since 2-methyl cyclohexanone is a ketone, it should exhibit this absorption band in its infrared spectrum.
However, if this band is absent in the spectrum, it suggests that the compound has undergone a chemical reaction and the carbonyl functional group has been transformed into a different functional group. The absence of the carbonyl stretch at around 1710-1735 cm⁻¹ is indicative of the absence of the starting material, 2-methyl cyclohexanone.
This peak is characteristic of the C=O bond stretch in a ketone functional group. In 2-methyl cyclohexanone, this bond is present in the starting material but absent in the product after the reaction.
The bond type and functional group of this key absorbance are:
Bond type: C=O bond
Functional group: Ketone (C=O group attached to two alkyl or aryl groups)
By observing the absence of this peak in the IR spectrum of the product, we can confirm that the reaction has taken place and the starting material has been consumed. This technique is commonly used in organic chemistry to monitor the progress of reactions and determine the identity of products.
To know more about Infrared spectroscopy, refer here:
https://brainly.com/question/13265448#
#SPJ11
What are the factors that influence the intensity of an IR absorption band?
The factors that influence the intensity of an IR absorption band are: Concentration of the sample, Path length of the sample, Polarization of the radiation, temperature, Molecular dipole moment, Molecular weight.
Concentration of the sample: An increase in the concentration of the sample leads to an increase in the intensity of an IR absorption band.
Path length of the sample: The intensity of an IR absorption band is directly proportional to the path length of the sample.
Temperature: The intensity of an IR absorption band decreases with an increase in temperature. This is because the molecular vibrations decrease at higher temperatures.
Polarization of the radiation: The intensity of an IR absorption band depends on the polarization of the radiation. When the polarization of the radiation is perpendicular to the vibrational dipole moment of the molecule, the intensity is low. But, when the polarization is parallel to the vibrational dipole moment, the intensity is high.
Molecular dipole moment: The intensity of an IR absorption band is directly proportional to the molecular dipole moment of the molecule. This is because the change in dipole moment during the vibration is directly proportional to the intensity of the absorption band.
Molecular weight: The intensity of an IR absorption band is inversely proportional to the molecular weight of the molecule. This is because the larger the molecule, the lower the frequency of the absorption band.
Learn more about IR absorption band here:
https://brainly.com/question/31115658
#SPJ11
What mass of AI2O3 forms from 16 g O2 and excess AI?
4AI + 3O2 ---> 2AI2O3
O2: 32g/mol AI2O3: 102 g/mol
Answer:
33.9 g
Explanation:
We can use stoichiometry to determine the amount of AI2O3 formed from the given amount of O2.
First, we need to calculate the amount of O2 in moles
n(O2) = m(O2) / M(O2) = 16 g / 32 g/mol = 0.5 mol
According to the balanced equation, 4 moles of AI react with 3 moles of O2 to produce 2 moles of AI2O3. This means that the mole ratio of O2 to AI2O3 is 3:2.
Since we have an excess of AI, all of the O2 will react with AI to form AI2O3. Therefore, we can use the mole ratio to calculate the amount of AI2O3 formed
n(AI2O3) = n(O2) x (2/3) = 0.5 mol x (2/3) = 0.333 mol
Finally, we can calculate the mass of AI2O3 formed using the molar mass of AI2O3
m(AI2O3) = n(AI2O3) x M(AI2O3) = 0.333 mol x 102 g/mol = 33.9 g
Therefore, 33.9 g of AI2O3 will form from 16 g of O2 and excess AI.
what are the key properties of solids (in contrast to liquids and gases)? check all that apply. what are the key properties of solids (in contrast to liquids and gases)?check all that apply. solids may be crystalline (ordered) or amorphous (disordered). solids are not easily compressed. solids can only be crystalline (ordered). solids are easily compressed. solids have an indefinite shape and do assume the shape of their container. solids can only be amorphous (disordered). solids have a definite shape and do not assume the shape of their container. solids usually have higher densities than liquids. solids usually have lower densities than liquids.
Solids have a definite shape and do not assume the shape of their container and solids are not easily compressed are the key properties of solids in contrast to liquids and gases.
Let's discuss the given options one by one:
Solids may be crystalline (ordered) or amorphous (disordered) - This statement is true. But it's not the key property of solids in contrast to liquids and gases.
Solid can only be crystalline (ordered) - This statement is false. Solids can be either crystalline (ordered) or amorphous (disordered).Solid are easily compressed - This statement is false. Solids are not easily compressed. In contrast to liquids and gases, solids are not easy to compress.
Solid have an indefinite shape and do assume the shape of their container - This statement is false. In contrast to liquids, solids have a definite shape and do not assume the shape of their container. Solid can only be amorphous (disordered) - This statement is false. Solids can be either crystalline (ordered) or amorphous (disordered).
Solid have a definite shape and do not assume the shape of their container - This statement is true. Solids have a definite shape and do not assume the shape of their container. Solid usually have higher densities than liquids - This statement is true. But it's not the key property of solids in contrast to liquids and gases.
Solid usually have lower densities than liquids - This statement is false. Solids usually have higher densities than liquids. Therefore, the key properties of solids in contrast to liquids and gases are "Solids have a definite shape and do not assume the shape of their container" and "Solids are not easily compressed".
Know more about solids
https://brainly.com/question/752663
#SPJ11
A 2.498M solution contains 245 g of HzSO4 What is the volume of the solution? The Periodic Table of Elements EE
The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1L.
Explanation:To find the volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4, follow these steps:
1. Determine the molar mass of H2SO4. From the Periodic Table of Elements, the molar masses of H, S, and O are approximately 1 g/mol, 32 g/mol, and 16 g/mol, respectively.
So, the molar mass of H2SO4 = (2 x 1) + 32 + (4 x 16) = 2 + 32 + 64 = 98 g/mol.
2. Calculate the moles of H2SO4 in the solution.
Moles = mass/molar mass = 245 g / 98 g/mol = 2.5 mol.
3. Determine the volume of the solution using the molarity formula.
Molarity (M) = moles/volume (L).
Rearrange the formula to solve for the volume: volume (L) = moles/M = 2.5 mol / 2.498 M = 1 L.
The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1 liter.
To know more about molar mass calculation, visit: https://brainly.com/question/22997914
#SPJ11
What is the CN covalent bond that is formed between the carboxyl group of an amino acid?
The CN covalent bond that is formed between the carboxyl group (-COOH) of an amino acid and the amino group (-NH2) of another amino acid is called a peptide bond.
Peptide bonds are formed through a condensation reaction, where a molecule of water is removed, and the carboxyl group of one amino acid combines with the amino group of another amino acid, forming a peptide bond and releasing a molecule of water. This process can be repeated to form longer chains of amino acids, known as polypeptides or proteins. Peptide bonds are strong and stable, and they play a critical role in the structure and function of proteins in living organisms.
Amino acids are the building blocks of proteins, and they are joined together by peptide bonds to form polypeptides and proteins. Peptide bonds are formed through a condensation reaction, where the carboxyl group of one amino acid reacts with the amino group of another amino acid, releasing a molecule of water. The resulting covalent bond is a peptide bond, which is a type of CN covalent bond.
To know more about Amino acids, visit: brainly.com/question/14583479
#SPJ4
How does magma move within the mantle?
Magma is molten rock that exists beneath the Earth's surface, primarily in the mantle layer. The movement of magma within the mantle is driven by several factors, including heat, pressure, and gravity.
The mantle is a layer of the Earth's interior that extends from the bottom of the crust to the top of the core, and it is composed of solid rock. However, within the mantle, there are regions of the rock that are partially melted, forming magma. This magma is less dense than the surrounding solid rock and tends to rise towards the Earth's surface.
The movement of magma within the mantle is influenced by convection currents, which are caused by the heat generated by the Earth's core. These convection currents cause magma to rise towards the Earth's surface, where it may form volcanoes or other types of volcanic activity.
Additionally, the movement of tectonic plates can also play a role in the movement of magma within the mantle. As plates move apart, magma can rise up to fill the space between them, leading to the formation of new crust.
Overall, the movement of magma within the mantle is a complex process that is influenced by a variety of factors, including heat, pressure, gravity, and the movement of tectonic plates.
Classify the organisms based on how they obtain food.
Answer:
First, I will give you a brief summary of what heterotrophs and autotrophs are:
Autotrophs are known as producers because they are able to make their own food from raw materials and energy. Examples include plants, algae, and some types of bacteria. Heterotrophs are known as consumers because they consume producers or other consumers. Dogs, birds, fish, and humans are all examples of heterotrophs.
Now, to get to the question.
The first option, which is the image of trees and grass will go into the autotroph box. This is because plants make food for themselves.
The second option, which is the image of the tiger, will go in the heterotroph box. This is because tigers eat foods like deer and wild boar, and those are heterotrophs.
The third option, which is the image of the deer, belongs in the heterotroph box. deers eat plants to survive, which are autotrophs, meaning that a deer is a heterotroph.
The fourth option, which is the image of some algae, belongs in the autotroph box. As I explained before, all algae are autotrophs.
The fifth option, which is the image of a human, belongs in the heterotroph box. Humans can't produce any food by themselves, so that makes them a heterotroph.
Finally, the last option, which is the image of some carrots, belongs in the autotroph box. Carrots provide their own food for themselves.
I hope this could help you! A brainilist is highly appreciated and helpful!
Prophase is the first step of mitosis, during which chromosomes condense and the nuclear envelope dissolves.
Prophase is the first stage of mitosis, a process of cell division that leads to the formation of two genetically identical daughter cells.
During prophase, the chromatin fibers that make up the genetic material condense into visible chromosomes. The nucleolus, a non-membrane-bound structure in the nucleus, disappears, and the nuclear envelope, which separates the nucleus from the cytoplasm, breaks down. This allows the condensed chromosomes to be released into the cytoplasm where they can interact with the microtubules that will eventually separate them into the two daughter cells. Prophase is followed by prometaphase, metaphase, anaphase, and telophase, all of which are critical steps in the process of mitosis.
To learn more about Prophase visit;
https://brainly.com/question/13883655
#SPJ4
researchers estimated that 0.07%, by mass, of a 12-gram sample of an orchid plant consists of the fattyacid eicosadienoic acid. based on this estimate, whatis the mass of eicosadienoic acid, in grams, in thisorchid sample?
The mass of eicosadienoic acid, in grams, in thisorchid sample is 0.0084 grams.
In this particular question, we are asked for the mass of eicosadienoic acid, in grams, in a 12-gram sample of an orchid plant based on an estimate that 0.07% (percent by mass), of the sample consists of this fatty acid. To solve this problem, we can use a simple proportion:
0.07/100 = x/12
where x is the mass of eicosadienoic acid, in grams, in the 12-gram sample. To solve for x, we can cross-multiply and simplify:
0.07 × 12 = 100 × x
0.84 = 100x
x = 0.0084 grams
Therefore, the mass of eicosadienoic acid in the 12-gram sample of the orchid plant is 0.0084 grams.
Learn more about percent by mass here: https://brainly.com/question/26150306
#SPJ11
predict what precipitate will form when a solution of aluminum chloride is mixed with a solution of potassium phosphate. AlPO4NaCl Na3Cl3 Al3PO4
When a solution of aluminum chloride is mixed with a solution of potassium phosphate, a precipitate of aluminum phosphate (AlPO4) will form. The reaction between aluminum chloride and potassium phosphate can be represented as follows: AlCl3 + K3PO4 → AlPO4 + 3KCl .
This is due to the fact that the aluminum ion (Al3+) and the phosphate ion (PO43-) can react to form a solid precipitate, which is insoluble in water.
Therefore, when a solution of aluminum chloride is mixed with a solution of potassium phosphate, a white precipitate of aluminum phosphate (AlPO4) will form, while potassium chloride (KCl) will remain in solution.
To know more about aluminum phosphate (AlPO4), here
brainly.com/question/15146433
#SPJ4
Determine the root-mean-square speed of CO2 molecules that have an average kinetic energy of
4.21 × 10–21 J per molecule.
the root-mean-square is a way of describing the average speed of the particles in a system.
The root-mean-square (rms) speed of gas molecules is related to the average kinetic energy (KE) of the molecules by the following equation:
rms speed = √(3RT/M)
Where R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas.
To solve this problem, we need to rearrange the above equation to solve for the rms speed:
rms speed [tex]= \sqrt{(3RT/M)} = \sqrt{(3kE_avg/M)}[/tex]
where k is the Boltzmann constant [tex](1.38* 10^{-23} J/K)[/tex] and [tex]E_{avg}[/tex] is the average kinetic energy per molecule.
Substituting the given values, we get:
rms speed = √(3 × 1.38 * 10⁻²³ J/K × 300 K / (44.01 g/mol × 1 kg/1000 g × 6.022 × 10²³ molecules/mol)) * 4.21 × 10⁻²¹J/molecule
Simplifying, we get:
rms speed [tex]= \sqrt{ (3 * 1.38 * 300 / (44.01 * 6.022))} * 4.21 *10^{-21}[/tex]
rms speed ≈ 416 m/s
Therefore, the root-mean-square speed of CO₂ molecules with an average kinetic energy of [tex]4.21 *10^{-21}[/tex] J per molecule is approximately 416 m/s.
To learn more about molar mass visit;
https://brainly.com/question/7585012
#SPJ4
What type of graph should lisa use to show her results?
Lisa's results can be presented in the following table:
Tablet Volume of HCl added (mL)
A 16
B 15
C 8
D 12
b. Lisa should use a bar graph to show her results.
What is a bar graph?A bar chart or bar graph is described as a chart or graph that presents categorical data with rectangular bars with heights or lengths proportional to the values that they represent.
The x-axis can be labeled with the different types of tablets (A, B, C, and D), and the y-axis can be labeled with the volume of hydrochloric acid needed to change the color of the universal indicator.
Each bar in the graph is expected to represent the volume of hydrochloric acid needed for a particular type of tablet.
The bar graph will allow Lisa to easily compare the results for each tablet and determine which one had the best antacid properties.
Learn more about bar graph at: https://brainly.com/question/24741444
#SPJ1
What is the difference between alkali metal and alkaline earth metals?
The difference between alkali metal and alkaline earth metals is in their atomic structure leading to differences in their reactivity and behavior
Alkali metals and alkaline earth metals differ in their physical and chemical properties. The atomic structure of these metals is different, leading to differences in their reactivity and behavior. Alkali metals are more reactive than alkaline earth metals. When reacting with water, alkali metals such as lithium, sodium, and potassium produce hydrogen gas and a basic solution. Alkaline earth metals, such as magnesium, calcium, and barium, react with water to produce hydrogen gas and a slightly basic solution.
Alkaline earth metals have higher melting points and densities than alkali metals, and they are less reactive as a result. Alkali metals have one valence electron, while alkaline earth metals have two, this difference in electron configuration affects the way they bond with other elements. Alkali metals have a larger atomic radius than alkaline earth metals due to the increased number of electrons in the outermost shell, resulting in a decreased ionization energy. Alkaline earth metals have a lower reactivity than alkali metals, but they are still very reactive. They also have a lower melting point and density than alkali metals, making them softer and more malleable.
Learn more about alkaline earth at:
https://brainly.com/question/12835232
#SPJ11
7. what is the balanced chemical equation for the dissolution of ammonium chloride in water?
The balanced chemical equation for the dissolution of ammonium chloride in water is given below:
NH4Cl(s) → NH4+(aq) + Cl-(aq)
Balanced equation for the dissolution of ammonium chloride in water: NH4Cl(s) → NH4+(aq) + Cl-(aq)Ammonium chloride is a compound composed of ammonium ions (NH4+) and chloride ions (Cl-). When ammonium chloride dissolves in water, it dissociates into these two ions, according to the above chemical equation. The ions are in the aqueous phase, meaning they are dissolved in water.
Ammonium chloride (NH4Cl) is a white crystalline salt formed by combining hydrochloric acid (HCl) and ammonia (NH3). Ammonium chloride is a very soluble compound that is often used in fertilizers, pharmaceuticals, and food. It is also used in various industrial applications.
Know more about equations
https://brainly.com/question/17145398
#SPJ11