Working with ArrayLists
Write a Java program that performs the following:
Creates an ArrayList, called al that can store integers Fills the al ArrayList with 10 random integer numbers between 1 and 100 Prints the content of al Removes the first element of al. Prints the removed element in step d. Prints the content of al again. Hint: Think it through. Would al look the same or different and why?

The prover employs a randomly chosen binary string R to generate a commitment value C' depending on the challenge value x while the commitment value C conceals the secret message M.

Without knowing anything specific about it, the verifier can confirm the prover's commitment and the information that has been made public to decide whether the prover actually knows the hidden message.

In your case, you want to prove that you know the secret message without uncovering anything about your knowledge or revealing the message itself. Here's a draft of an interactive ZKP to achieve this:

Setup:

Choose a secret message, let's call it M.

Generate a commitment value C using a commitment scheme (e.g., Pedersen commitment) that hides the secret message.

Protocol:

Prover (you):

Randomly select a binary string, let's call it R, of the same length as the secret message M.

Calculate a commitment value, C' using the commitment scheme with R.

Send C' to the verifier.

Verifier:

Randomly select a challenge value, let's call it x (e.g., 0 or 1).

Send x to the prover.

Prover:

If x = 0:

Reveal the secret message M to the verifier.

If x = 1:

Reveal the binary string R to the verifier.

Verifier:

Verify the revealed information:

If x = 0, check if the revealed message matches M.

If x = 1, check if the revealed binary string matches R.

Verify the commitment by checking if C' matches the commitment calculated based on the revealed information.

Completion:

Repeat the protocol multiple times to ensure soundness and prevent lucky guesses.

If the prover successfully convinces the verifier in multiple rounds without revealing any information about the secret message M, the proof is considered valid.

In this interactive ZKP, the commitment value C hides the secret message M, and the prover uses a randomly selected binary string R to create a commitment value C' based on the challenge value x. The verifier can verify the commitment and the revealed information to determine if the prover indeed possesses knowledge of the secret message without learning anything specific about it.

Note that this is a simplified draft, and in practice, you would need to use appropriate cryptographic primitives, such as commitment schemes and challenge-response mechanisms, to ensure the security and integrity of the proof.

Learn more about string   here:

https://brainly.com/question/32338782

#SPJ11

Find the intersection of two arrays by using a hash set. Time complexity: O(n + m)and  find the mode of an array using a hash map. Time complexity: O(n).

(a) To find the intersection of two arrays A and B, we can use a hash set to efficiently store the elements of one array and then iterate over the other array to check for common elements. The algorithm involves three main steps: 1. Create an empty hash set.

2. Iterate through array A and insert each element into the hash set.

3. Iterate through array B and check if each element is present in the hash set. If it is, add it to the result array C.

The time complexity of this algorithm is O(n + m), where n and m are the lengths of arrays A and B, respectively.

(b) To find the mode of array A, we can use a hash map to store the frequency count of each element in A. The algorithm involves two main steps:1. Create an empty hash map.

2. Iterate through array A, and for each element, update its frequency count in the hash map.

3. Iterate through the hash map and find the element(s) with the highest frequency count. Return one of the modes.

The time complexity of this algorithm is O(n), where n is the length of array A.



Find the intersection of two arrays by using a hash set. Time complexity: O(n + m) and  find the mode of an array using a hash map. Time complexity: O(n)

To learn more about hash map click here

brainly.com/question/30258124

#SPJ11

The provided Java program implements a hybrid summation algorithm using Fork-Join parallelism. It allows you to experiment with different factors that can affect the efficiency of parallel computing, such as the maximum number of concurrent processes, different computing environments, and running the program with other software.

To conduct your experiments, you can modify the following aspects:

Change the maximum number of concurrent processes allowed by the program by adjusting the value of Globals.processes.

Try running the program on different systems to compare their performance.

Run the program with different software running simultaneously, such as Excel, Word, music players, or large game programs, to observe how they impact the execution time.

Modify the code to switch from recursion to iteration to explore the impact on concurrent computing.

The Java program provided offers a flexible platform to explore the efficiency of parallel computing under different conditions. By varying the maximum number of concurrent processes, the computing environment, and the presence of other software, you can observe the effect on the program's execution time and overall performance.

Running the program multiple times with different configurations will allow you to gather data and draw conclusions based on your experiments. For example, you can compare the execution time of the program on different computers to evaluate their computational power. Similarly, by adjusting the maximum number of concurrent processes, you can analyze how it affects the parallel execution and the program's runtime.

Furthermore, running the program with other software concurrently will give you insights into the impact of multitasking on parallel computing. You can measure the execution time under different scenarios and determine how resource-intensive applications affect the program's performance.

Finally, if you modify the code to switch from recursive to iterative processes, you can investigate the efficiency and trade-offs between the two approaches in the context of parallel computing.

Overall, by conducting these experiments and analyzing the data collected, you can gain a deeper understanding of the factors influencing parallel computing efficiency and draw conclusions about optimal settings and configurations for different computing scenarios.

To learn more about java software

brainly.com/question/31502096

#SPJ11

To simulate a CRUD application with login functionality using PHP.

Start by creating a PHP script with login functionality. On the first line of your code, comment your full name and section. Set up a MySQL database named "studentDB" with two tables: "student" and "login" with the specified fields. Establish a connection to the database using PHP. Create a form to input and save data for name, age, email, and GPA. Implement functionality to display the saved data from the database. Create two views: an admin side with login access to perform CRUD operations on student data, and a student side with login access to view student records without the ability to modify them. Make sure to include CSS design in your work to enhance the visual appearance of the application. Finally, create a document (LastName_FirstName.docx) that includes a screenshot of your output and the source code for your project.

To know more about CRUD application visit:

brainly.com/question/20308949

#SPJ11

The relative entropy, also known as the Kullback-Leibler divergence, is convex in the pair (p, q). This means that for any probability distributions p1, p2, q1, q2, and any weight λ ∈ [0, 1], the inequality D [λp1 + (1 − λ)p2||λq1 + (1 − λ)q2] ≤ λD(p1||q1) + (1 − λ)D(p2||q2) holds.

The convexity of relative entropy, we can use Jensen's inequality. Jensen's inequality states that for a convex function f and any weight λ ∈ [0, 1], we have f(λx + (1 - λ)y) ≤ λf(x) + (1 - λ)f(y). We can rewrite the relative entropy as D(p||q) = Σp(i)log(p(i)/q(i)), where p(i) and q(i) are the probabilities of the i-th element in the distributions. By applying Jensen's inequality to each term in the summation, we obtain D [λp1 + (1 − λ)p2||λq1 + (1 − λ)q2] ≤ Σ[λp1(i)log(p1(i)/q1(i)) + (1 − λ)p2(i)log(p2(i)/q2(i))]. This expression can be further simplified to λD(p1||q1) + (1 − λ)D(p2||q2), which proves the convexity of the relative entropy.

Therefore, we can conclude that the relative entropy is a convex function in the pair (p, q), and the inequality D [λp1 + (1 − λ)p2||λq1 + (1 − λ)q2] ≤ λD(p1||q1) + (1 − λ)D(p2||q2) holds for any probability distributions p1, p2, q1, q2, and weight λ ∈ [0, 1].

Learn more about entropy : brainly.com/question/32167470

#SPJ11

Virtualization: It is a strategy of creating several instances of operating systems or applications that execute on a single computer or server. Virtualization employs software to reproduce physical hardware and create virtual versions of computers, servers, storage, and network devices. As a result, these virtual resources can operate independently or concurrently.

Type 2 Hypervisors: Type 2 hypervisors are hosted hypervisors that are installed on top of a pre-existing host operating system. Because of their operation, Type 2 hypervisors are often referred to as "hosted" hypervisors. Type 2 hypervisors offer a simple method of getting started with virtualization. However, Type 2 hypervisors have some limitations, like the fact that they are entirely reliant on the host operating system's performance.

"Hosted" Approach: The hosted approach entails installing a hypervisor on top of a host operating system. This hypervisor uses hardware emulation to create a completely functional computer environment on which several operating systems and applications can run concurrently. In general, the hosted approach is used for client-side virtualization. This method is easy to use and is especially useful for the creation of virtual desktops or the ability to run many operating systems on a single computer.

A hypervisor is software that creates and runs VM instances: A hypervisor, also known as a virtual machine manager, is software that creates and manages virtual machines (VMs). The hypervisor allows several VMs to execute on a single physical computer, which means that the computer's hardware can be utilized more efficiently. The hypervisor's role is to manage VM access to physical resources such as CPU, memory, and I/O devices, as well as to provide VM isolation.

Know more about virtualization, here:

https://brainly.com/question/31257788

#SPJ11

In reinforcement learning and Q-learning, a random policy refers to a strategy or decision-making approach where actions are chosen randomly without considering the current state or any learned knowledge. It means that the agent selects actions without any preference or knowledge about which actions are better or more likely to lead to a desirable outcome. On the other hand, an optimal policy refers to a strategy that maximizes the expected cumulative reward over time. It is the ideal policy that an agent aims to learn and follow to achieve the best possible outcomes.

A random policy is often used as an initial exploration strategy in reinforcement learning when the agent has limited or no prior knowledge about the environment. By choosing actions randomly, the agent can gather information about the environment and learn from the observed rewards and consequences. However, a random policy is not efficient in terms of achieving desirable outcomes or maximizing rewards. It lacks the ability to make informed decisions based on past experiences or learned knowledge, and therefore may lead to suboptimal or inefficient actions.

On the other hand, an optimal policy is the desired outcome of reinforcement learning. It represents the best possible strategy for the agent to follow in order to maximize its long-term cumulative reward. An optimal policy takes into account the agent's learned knowledge about the environment, the state-action values (Q-values), and the expected future rewards associated with each action. The agent uses this information to select actions that are most likely to lead to high rewards and desirable outcomes.

The main difference between a random policy and an optimal policy lies in their decision-making processes. A random policy does not consider any learned knowledge or preferences, while an optimal policy leverages the learned information to make informed decisions. An optimal policy is derived from a thorough exploration of the environment, learning the values associated with different state-action pairs and using this knowledge to select actions that maximize expected cumulative rewards. In contrast, a random policy is a simplistic and naive approach that lacks the ability to make informed decisions based on past experiences or learned knowledge.

To learn more about Optimal policy - brainly.com/question/31756369

#SPJ11

In reinforcement learning and Q-learning, a random policy refers to a strategy or decision-making approach where actions are chosen randomly without considering the current state or any learned knowledge. It means that the agent selects actions without any preference or knowledge about which actions are better or more likely to lead to a desirable outcome. On the other hand, an optimal policy refers to a strategy that maximizes the expected cumulative reward over time. It is the ideal policy that an agent aims to learn and follow to achieve the best possible outcomes.

A random policy is often used as an initial exploration strategy in reinforcement learning when the agent has limited or no prior knowledge about the environment. By choosing actions randomly, the agent can gather information about the environment and learn from the observed rewards and consequences. However, a random policy is not efficient in terms of achieving desirable outcomes or maximizing rewards. It lacks the ability to make informed decisions based on past experiences or learned knowledge, and therefore may lead to suboptimal or inefficient actions.

On the other hand, an optimal policy is the desired outcome of reinforcement learning. It represents the best possible strategy for the agent to follow in order to maximize its long-term cumulative reward. An optimal policy takes into account the agent's learned knowledge about the environment, the state-action values (Q-values), and the expected future rewards associated with each action. The agent uses this information to select actions that are most likely to lead to high rewards and desirable outcomes.

The main difference between a random policy and an optimal policy lies in their decision-making processes. A random policy does not consider any learned knowledge or preferences, while an optimal policy leverages the learned information to make informed decisions. An optimal policy is derived from a thorough exploration of the environment, learning the values associated with different state-action pairs and using this knowledge to select actions that maximize expected cumulative rewards. In contrast, a random policy is a simplistic and naive approach that lacks the ability to make informed decisions based on past experiences or learned knowledge.

To learn more about Optimal policy - brainly.com/question/31756369

#SPJ11

To solve the discrete logarithm problem 2^x ≡ 6 (mod 101) using the Pohlig-Hellman algorithm, we need to factorize the modulus (101-1 = 100) and solve the congruences modulo each prime factor.

Prime factorization of 100: 2^2 * 5^2

Solve the congruence modulo 2^2 = 4:

We need to find an integer x such that 2^x ≡ 6 (mod 101) and x ≡ 0 (mod 4).

By checking the possible values of x (0, 4, 8, ...), we find that x = 8 satisfies the congruence.

Solve the congruence modulo 5^2 = 25:

We need to find an integer x such that 2^x ≡ 6 (mod 101) and x ≡ a (mod 25).

By checking the possible values of a (0, 1, 2, ..., 24), we find that a = 21 satisfies the congruence.

Combine the solutions:

Using the Chinese Remainder Theorem, we can find the unique solution modulo 100.

From step 1, we have x ≡ 8 (mod 4) and from step 2, we have x ≡ 21 (mod 25).

Solving these congruences, we find that x ≡ 46 (mod 100) is the solution to the discrete logarithm problem.

Therefore, the solution to the given discrete logarithm problem 2^x ≡ 6 (mod 101) using the Pohlig-Hellman algorithm is x ≡ 46 (mod 100).

Learn more about the Pohlig-Hellman algorithm for solving discrete logarithm problems here: https://brainly.com/question/32422218

#SPJ11

The program creates a Car class with instance attributes and methods to represent a car. The program then instantiates two Car objects, manipulates their attributes using the defined methods, and displays the car information at different stages of the program's execution.

1. The program consists of a Car class defined within the "car.py" file. The Car class represents a car and includes a constructor to initialize the instance attributes: make, model, color, price, and mileage. The mileage attribute is set to 0 by default. The class also includes instance methods such as set_price(), paint(), show_car_info(), and travel().

2. The set_price() method updates the price attribute of the car. The paint() method changes the color attribute of the car. The show_car_info() method displays all available information about the car. The travel() method displays a message indicating the distance traveled and updates the mileage attribute accordingly.

3. Within the same "car.py" file, a program is written that utilizes the Car class. It creates two Car objects, a black Porsche 718 Cayman GTS 4.0 with a price of $87,400, and a red Toyota Corolla L with a price of $20,175. The program displays the information for each car using the show_car_info() method, then changes the color of both cars. Next, it simulates the cars being stolen and driven for long distances, updating the mileage attribute accordingly. After that, the program adjusts the prices of the cars due to depreciation. Finally, it calls the show_car_info() method again to display the updated information for each car.

learn more about program here: brainly.com/question/31163921

#SPJ11

To construct a circuit that inputs a 4-bit Binary Coded Decimal (BCD) number ABCD and detects primes within the BCD input range, you can follow these steps:

Break down the problem:

Convert the 4-bit BCD input into a corresponding decimal number.

Check if the decimal number is a prime number.

Output a signal indicating whether the input BCD number is prime or not.

Convert BCD to Decimal:

Create a 4-bit BCD-to-Decimal converter circuit to convert the input BCD number ABCD into a corresponding decimal number.

Prime Number Detection:

Create a prime number detection circuit that takes the decimal number as input and determines if it is a prime number.

You can use any prime number detection algorithm or method, such as trial division or the Sieve of Eratosthenes, to check for primality.

Output Signal:

Based on the result of the prime number detection circuit, generate an output signal that indicates whether the input BCD number is prime or not.

Here's a simplified representation of the circuit:

sql

Copy code

  +---------+

  | BCD to  |         +------------------+

  | Decimal |---+---->| Prime Number     |

  | Decoder |   |     | Detection        |

  +---------+   |     | Circuit          |

                |     +------------------+

  +---------+   |

  | BCD     |   |

  | Input   |---+

  | Circuit |

  +---------+

  | Output  |

  | Signal  |

  +---------+

Note: The detailed implementation of the BCD-to-Decimal converter and the prime number detection circuit would depend on the specific components and design methodology you are using. You may need to consult additional resources or use specialized software/tools for circuit design and simulation to create the specific circuits for this task.

Learn more about input here:

https://brainly.com/question/32418596

#SPJ11

Here's the completed algorithm to search a linked list for an item:

```cpp

int search(int item) {

   Node* current = head;

   int index = 0;

   while (current != NULL) {

       if (current->getData() == item) {

           return index;

       } else {

           current = current->getNext();

           index++;

       }

   }

   return -1;

}

```

In this algorithm:

1. We initialize a pointer `current` to the head of the linked list and an index variable to 0.

2. We enter a while loop that continues until we reach the end of the linked list (i.e., `current` becomes `NULL`).

3. Inside the loop, we check if the data stored in the current node (`current->getData()`) is equal to the desired item. If it is, we return the current index as the position where the item was found.

4. If the current node does not contain the desired item, we update the `current` pointer to the next node (`current = current->getNext()`) and increment the index by 1.

5. If the end of the linked list is reached without finding the item, we return -1 to indicate that the item was not found in the linked list.

To know more about loop , click here:

https://brainly.com/question/14390367

#SPJ11

Assuming we have two tables named "Customer" and "Product", the following SQL queries can be used to establish relationships between them:

To add a foreign key column in the Product table that references the Customer table:

ALTER TABLE Product

ADD COLUMN customer_id INT,

ADD FOREIGN KEY (customer_id) REFERENCES Customer(customer_id);

To retrieve all products purchased by a specific customer:

SELECT * FROM Product WHERE customer_id = [specific_customer_id];

To retrieve all customers who have purchased a specific product:

SELECT c.*

FROM Customer c

INNER JOIN Product p ON c.customer_id = p.customer_id

WHERE p.product_id = [specific_product_id];

To retrieve the total amount of money spent by each customer on all their purchases:

SELECT c.customer_id, SUM(p.price) AS total_spent

FROM Customer c

INNER JOIN Product p ON c.customer_id = p.customer_id

GROUP BY c.customer_id;

To retrieve the most popular products (i.e., those purchased by the highest number of customers):

SELECT p.product_id, COUNT(DISTINCT p.customer_id) AS num_customers

FROM Product p

GROUP BY p.product_id

ORDER BY num_customers DESC;

Note: These queries assume that the two tables have primary keys named "customer_id" and "product_id" respectively, and that the "Product" table has a column named "price" that represents the cost of each item. If these column names or assumptions are different for your specific use case, you may need to modify the queries accordingly.

Learn more about SQL queries here:

https://brainly.com/question/31663300

#SPJ11

The output matrix g(u,v) for the given matrix f(x,y) with c=[tex]L/log10(L+1)[/tex] is [0.6789 1.0781 1.5754 1.7436; 1.7436 1.0781 1.7436 1.7436; 0.6789 0.6789 1.3638 1.9325; 1.0781 1.3638 1.7436 1.9325].

By choosing c asi. c = 1 and ii. [tex]c = L/log10(L+1)[/tex]

To find g(u,v) for f(x,y) matrix with c=1, we have the following steps:

Step 1:Find the values of[tex]log10 (1+f(x,y))[/tex] using the below formula:log10 (1+f(x,y)) = [tex]log10 (1+[pixel values])[/tex]

Step 2:Evaluate the values of log10 (1+f(x,y)) from the matrix f(x,y) values. Step 3:Substitute the obtained values of log10 (1+f(x,y)) in the expression of g(u,v) to get the output matrix g(u,v).

Let's find out g(u,v) for matrix f(x,y) with c=1 for the following matrices a) and b).a) f(x,y) = [128 212 255;54 62 124;140 152 156]

Step 1:Find the values of log10 (1+f(x,y)) using the formula:log10 (1+f(x,y)) = log10 (1+[pixel values])Therefore,[tex]log10 (1+f(x,y))[/tex] = [2.1072 2.3297 2.4082; 1.7609 1.8062 2.0969; 2.1461 2.1838 2.1925]

Step 2:Evaluate the values of log10 (1+f(x,y)) from the matrix f(x,y) values.

Step 3:Substitute the obtained values of [tex]log10 (1+f(x,y))[/tex]in the expression of g(u,v) to get the output matrix g(u,v)g(u,v) = | c log10 (1+f(x,y)) |g(u,v) = |1x2.1072 1x2.3297 1x2.4082; 1x1.7609 1x1.8062 1x2.0969; 1x2.1461 1x2.1838 1x2.1925|g(u,v) = [2.1072 2.3297 2.4082; 1.7609 1.8062 2.0969; 2.1461 2.1838 2.1925]

Therefore, the output matrix g(u,v) for the given matrix f(x,y) with c=1 is [2.1072 2.3297 2.4082; 1.7609 1.8062 2.0969; 2.1461 2.1838 2.1925].b) [tex]:log10 (1+f(x,y))[/tex]values])

Therefore,[tex]log10 (1+f(x,y))[/tex]= [0.3010 0.4771 0.6989 0.7782; 0.7782 0.4771 0.7782 0.7782; 0.3010 0.3010 0.6021 0.8451; 0.4771 0.6021 0.7782 0.8451]

Step 2:Evaluate the values of log10 (1+f(x,y)) from the matrix f(x,y) values.

Step 3:Substitute the obtained values of log10 (1+f(x,y)) in the expression of g(u,v) to get the output matrix [tex]g(u,v)g(u,v) = | c log10 (1+f(x,y)) |g(u,v) =[/tex]|0.6369 1.0093 1.4750 1.6405; 1.6405 1.0093 1.6405 1.6405; 0.6369 0.6369 1.2782 1.8059; 1.0093 1.2782 1.6405 1.8059|g(u,v) = [0.6369 1.0093 1.4750 1.6405; 1.6405 1.0093 1.6405 1.6405; 0.6369 0.6369 1.2782 1.8059; 1.0093 1.2782 1.6405 1.8059]

To know more about given visit:

brainly.com/question/9299377

#SPJ11

To find all frequent itemsets with a minimum support of 60%, we can use the Apriori algorithm.

First, we count the frequency of each individual item in the dataset and prune any items that do not meet the minimum support threshold. In this case, all items have a frequency greater than or equal to 60%, so no pruning is necessary.

C1 = {1, 2, 3, 4, 5, 6, 7}

I1 = {1, 2, 3, 4, 5, 6, 7}

Next, we generate candidate sets of size 2 by joining the frequent itemsets from the previous step.

C2 = {12, 13, 14, 15, 16, 17, 23, 24, 25, 26, 27, 34, 35, 36, 37, 45, 46, 47, 56, 57, 67}

We prune C2 by removing any itemsets that contain an infrequent subset.

Pruned C2 = {12, 13, 14, 15, 16, 17, 23, 24, 25, 27, 34, 35, 36, 37, 45, 46, 47, 56, 57, 67}

I2 = {12, 13, 14, 15, 16, 17, 23, 24, 25, 27, 34, 35, 36, 37, 45, 46, 47, 56, 57, 67}

We continue this process to generate larger candidate sets until no more frequent itemsets can be found:

C3 = {123, 124, 125, 134, 135, 145, 234, 235, 245, 345}

Pruned C3 = {123, 124, 125, 134, 135, 145, 234, 235, 245, 345}

I3 = {123, 124, 125, 134, 135, 145, 234, 235, 245, 345}

C4 = {1235, 1245, 1345, 2345}

Pruned C4 = {1235, 1245, 1345, 2345}

I4 = {1235, 1245, 1345, 2345}

Therefore, the frequent itemsets with a minimum support of 60% are:

{1}, {2}, {3}, {4}, {5}, {6}, {7}, {12}, {13}, {14}, {15}, {16}, {17}, {23}, {24}, {25}, {27}, {34}, {35}, {36}, {37}, {45}, {46}, {47}, {56}, {57}, {67}, {123}, {124}, {125}, {134}, {135}, {145}, {234}, {235}, {245}, {345}, {1235}, {1245}, {1345}, {2345}

To find association rules with a minimum support of 60% and minimum confidence of 75%, we can use the frequent itemsets generated in the previous step:

{1} -> {2}:  support = 40%, confidence = 66.67%

{1} -> {3}:  support = 50%, confidence = 83.33%

{1} -> {5}:  support = 60%, confidence = 100%

{1} -> {6}:  support = 40%, confidence = 66.67%

{1} -> {2, 3}:  support = 30%, confidence = 75%

{1} -> {2, 5}:  support = 40%, confidence = 100%

{1} -> {3, 5}:  support = 40%, confidence = 80%

{1} -> {2, 6}:  support = 20%, confidence = 50%

{2} -> {1, 3, 5}:  support = 20%, confidence = 100%

{3} -> {1, 2, 5}:  support = 30%, confidence = 60%

{4} -> {1}:  support = 20%, confidence = 100%

{4} -> {3}:  support = 20%, confidence = 100%

{4} -> {6}:  support = 20%, confidence = 100%

{5} -> {1, 2, 3}:  support = 40%, confidence = 66.67

Learn more about algorithm here:

https://brainly.com/question/21172316

#SPJ11

The assignment extends an existing program by adding three new functionalities: visiting every node and applying a function to its data, visiting nodes with a specified key and applying a function to their data, and visiting nodes with a specific data element and applying a function to their data

1. The assignment requires adding three new functionalities to an existing program that utilizes a binary search tree. The original functionality involves reading data from a file, inserting it into the binary search tree, and allowing the user to search for data associated with a key string. The new functionalities include visiting every node in the tree and applying a function to the data of each node, visiting nodes with a specified key and applying a function to their data, and visiting nodes with a specific data element and applying a function to their data. Additionally, there is an extra credit option to create a class and overload operators for the binary node class.

2. The assignment builds upon an existing program that uses a binary search tree. The original functionality, which reads data from a file, inserts it into the binary search tree, and allows searching by key, remains unchanged. The new functionalities involve visiting every node in the tree and applying a function to the data of each node. This can be achieved by implementing a visit() function that takes a function as an argument and applies it to the data of each node. Additionally, there is a variation of the visit() function, visitnamed(), which applies a function only to the node with a specified key.

3. Furthermore, the assignment introduces another variation of the visit() function, visitonly(), which applies a function only to nodes with a specific data element. For example, if the data element is "Cat," the visitonly() function will apply the provided function to all nodes in the tree that contain the substring "Cat" in their data.

4. To test the implemented functionalities, it is recommended to create multiple functions, such as foo() and foo2(), with different behaviors. These functions can print the nodes they reach in various ways, for instance, printing names in lowercase or uppercase. By running the program and observing the output, it should be evident that the visit functions are working correctly.

5. For extra credit, it is suggested to create a class that represents the type of nodes in the binary search tree. This involves overloading operators such as less than (<), greater than (>), and equal to (==) to enable comparisons and manipulations with instances of the class. Overloading these operators allows for a more customized implementation of the binary search tree based on the specific requirements of the class.

6. There is an extra credit option to create a class and overload operators for the binary node class. Proper testing should be performed to ensure the correctness of the implemented functionalities.

Learn more about binary search tree here: brainly.com/question/30391092

#SPJ11

There are 9 such passwords of length 8 that use only the letters A, B, and C and include each letter at least once.

To find the number of passwords that use only the letters A, B, and C and must include each letter at least once, we can consider the following cases:

One letter is repeated twice, and the other two letters are used once each.

One letter is repeated three times, and the other two letters are used once each.

Case 1:

In this case, we have three options for the letter that is repeated twice (A, B, or C). Once we choose the repeated letter, we have two remaining letters to choose for the remaining positions. Therefore, the number of passwords for this case is 3 * 2 = 6.

Case 2:

In this case, we have three options for the letter that is repeated three times (A, B, or C). Once we choose the repeated letter, we have one remaining letter to choose for the remaining positions. Therefore, the number of passwords for this case is 3 * 1 = 3.

Total number of passwords = Number of passwords in Case 1 + Number of passwords in Case 2

= 6 + 3

= 9

Therefore, there are 9 such passwords of length 8 that use only the letters A, B, and C and include each letter at least once.

Learn more about passwords  here:

https://brainly.com/question/31790282

#SPJ11

The purpose of this report is to outline the steps involved in the installation and configuration of Linux (Ubuntu) using virtualization software.

[Your Name]

[Your Position]

[Date]

Subject: Linux (Ubuntu) Installation Process for Computer Engineering Department

Dear [Recipient's Name],

I am writing to provide a detailed technical report on the Linux (Ubuntu) installation process adopted by our organization's Computer Engineering Department. The purpose of this report is to outline the steps involved in the installation and configuration of Linux (Ubuntu) using virtualization software, partition types and file systems utilized, screenshots of important installation processes, and practical examples of essential Linux commands.

1. Usage of Virtual Software (VMware/Virtual Box):

In our organization, we utilize virtualization software such as VMware or VirtualBox to set up virtual machines for Linux installations. These software tools allow us to create and manage virtual environments, which are highly beneficial for testing and development purposes.

2. Partition Types and File Systems in Linux:

During the Linux installation process, we utilize the following partition types and file systems:

  - Partition Types:

    * Primary Partition: Used for the main installation of Linux.

    * Extended Partition: Used for creating logical partitions within it.

    * Swap Partition: Used for virtual memory.

  - File Systems:

    * ext4: The default file system for most Linux distributions, known for its reliability and performance.

    * swap: Used for swap partitions.

3. Screenshots of Linux Installation Processes:

Below are the important installation processes of Linux (Ubuntu) along with corresponding screenshots:

  [Include relevant screenshots showcasing the installation steps]

4. Login Screen:

Upon successful installation, the login screen is displayed, as shown below:

  [Insert screenshot of the login screen with your name (Prince Tawiah) and password (Prince)]

5. Console Linux Commands:

Here are four examples of essential console Linux commands, along with screenshots illustrating their usage:

  a) Command: ls -l

     [Insert screenshot showing the output of the command]

  b) Command: pwd

     [Insert screenshot showing the output of the command]

  c) Command: mkdir directory_name

     [Insert screenshot showing the output of the command]

  d) Command: cat file.txt

     [Insert screenshot showing the output of the command]

6. Creating Directory and Subdirectories:

To create a directory and subdirectories with the name "FoE," you can use the following commands:

  Command:

  ```

  mkdir -p FoE/subdirectory1/subdirectory2

  ```

  [Insert screenshot showing the successful creation of the directory and subdirectories]

7. Moving a Text File to a Directory using the "mv" Command:

To move a text file to a directory, we utilize the "mv" (move) command. Here is an example:

  Command:

  ```

  mv file.txt destination_directory/

  ```

  [Insert screenshot showing the successful movement of the text file to the destination directory]

By following these guidelines and using the provided screenshots, the computer engineering department can effectively install Linux (Ubuntu) using virtualization software and leverage essential Linux commands for day-to-day tasks.

If you have any further questions or require additional information, please feel free to reach out to me.

Thank you for your attention to this matter.

Sincerely,

[Your Name]

[Your Position]

[Contact Information]

To know more about Virtual Software, click here:

https://brainly.com/question/32225916

#SPJ11

The requirement for an action to be rational is not respecting autonomy. Cheating on an exam is considered unethical because it does not respect autonomy.

Respecting autonomy is not a requirement for an action to be rational. Rationality typically involves maximizing utility, being consistent with one's goals, and being generalizable. These factors are commonly considered when making rational decisions. However, respecting autonomy refers to recognizing and respecting the independence and self-governance of individuals, which may be an ethical consideration but not a requirement for an action to be rational.

When it comes to cheating on an exam, it is considered unethical because it violates principles such as fairness, honesty, and integrity. Cheating is not generalizable, meaning it would not be acceptable if everyone engaged in such behavior. It goes against the principles of fairness and equal opportunity. Cheating also does not respect autonomy as it undermines the integrity of the examination process and disregards the rules and guidelines set by educational institutions. Cheating does not maximize utility either, as it can lead to negative consequences such as disciplinary actions, loss of reputation, and compromised learning outcomes.

To learn more about Autonomy - brainly.com/question/17174025

#SPJ11

It is beneficial to use an adjacency matrix over an adjacency list : when the graph is sparsely connected or when the graph represents a large city with each vertex as an intersection and each edge connecting intersections.

On the other hand, an adjacency list is preferred when |VI + |E| cannot fit in memory or when |El approaches its maximum value |V|^2.

When the graph is sparsely connected, meaning it has relatively few edges compared to the number of vertices, an adjacency matrix can be more efficient. In this case, the matrix would have many entries with a value of 0, indicating the absence of an edge. Storing these 0 values in the matrix is more space-efficient than maintaining a list of empty adjacency entries for each vertex in an adjacency list.

When the graph represents a large city with each vertex as an intersection and each edge connecting intersections, an adjacency matrix can be advantageous. This scenario typically involves a dense graph with a high number of edges. Using an adjacency matrix allows for constant-time access to determine the existence of an edge between any two intersections.

On the other hand, an adjacency list is preferred when the total number of vertices and edges, denoted as |VI + |E|, cannot fit in memory. An adjacency matrix requires |V|^2 memory space, which can become impractical for large graphs. In such cases, an adjacency list, which only requires memory proportional to the number of edges, is a more efficient choice.

Additionally, when |El approaches its maximum value |V|^2, meaning the graph is nearly complete, an adjacency list becomes more efficient. In a complete graph, most entries in the adjacency matrix would be non-zero, resulting in significant memory wastage. An adjacency list, on the other hand, only stores the existing edges, optimizing memory usage.

To know more about memory click here: brainly.com/question/14829385

#SPJ11

Here is a possible implementation of the Card, Deck, and Hand classes in C++:

cpp

#include <iostream>

#include <string>

#include <vector>

#include <ctime>

#include <cstdlib>

class Card {

public:

   Card(std::string suit, std::string name) : m_suit(suit), m_name(name) {}

   std::string getSuit() const { return m_suit; }

   void setSuit(const std::string& suit) { m_suit = suit; }

   std::string getName() const { return m_name; }

   void setName(const std::string& name) { m_name = name; }

private:

   std::string m_suit;

   std::string m_name;

};

class Deck {

public:

   Deck() {

       std::vector<std::string> suits = { "Clubs", "Diamonds", "Hearts", "Spades" };

       std::vector<std::string> names = { "Ace", "2", "3", "4", "5", "6", "7", "8", "9", "10", "Jack", "Queen", "King" };

       for (const auto& suit : suits) {

           for (const auto& name : names) {

               m_cards.push_back(Card(suit, name));

           }

       }

   }

   void print() const {

       for (const auto& card : m_cards) {

           std::cout << card.getName() << " of " << card.getSuit() << '\n';

       }

   }

   void shuffle() {

       srand(static_cast<unsigned int>(time(nullptr)));

       for (size_t i = 0; i < m_cards.size(); ++i) {

           size_t j = rand() % m_cards.size();

           std::swap(m_cards[i], m_cards[j]);

       }

   }

   void addCard(Card card) {

       m_cards.push_back(card);

   }

   Card removeCard() {

       if (m_cards.empty()) {

           throw std::out_of_range("Deck is empty");

       }

       Card card = m_cards.front();

       m_cards.erase(m_cards.begin());

       return card;

   }

   void sortCards() {

       std::sort(m_cards.begin(), m_cards.end(), [](const Card& a, const Card& b) {

           return a.getName() < b.getName();

       });

   }

private:

   std::vector<Card> m_cards;

};

class Hand : public Deck {

public:

   Hand() {}

   void print() const {

       for (const auto& card : m_cards) {

           std::cout << card.getName() << " of " << card.getSuit() << '\n';

       }

   }

};

int main() {

   Deck deck;

   deck.shuffle();

   Hand hand1;

   for (int i = 0; i < 5; ++i) {

       Card card = deck.removeCard();

       hand1.addCard(card);

   }

   Hand hand2;

   for (int i = 0; i < 5; ++i) {

       Card card = deck.removeCard();

       hand2.addCard(card);

   }

   std::cout << "Deck:\n";

   deck.print();

   std::cout << "\nHand 1:\n";

   hand1.sortCards();

   hand1.print();

   std::cout << "\nHand 2:\n";

   hand2.sortCards();

   hand2.print();

   std::cout << "\nReturning cards to deck...\n";

   while (!hand1.isEmpty()) {

       Card card = hand1.removeCard();

       deck.addCard(card);

   }

   while (!hand2.isEmpty()) {

       Card card = hand2.removeCard();

       deck.addCard(card);

   }

   std::cout << "\nDeck after returning cards:\n";

   deck.print();

   return 0;

}

The Card class stores the suit and name of a playing card using std::strings. It has getters and setters for each member variable.

The Deck class stores a vector of Card objects, which it initializes with the standard 52 cards in the constructor. It has functions to print, shuffle, add, remove, and sort cards in the deck. The shuffle function uses srand and rand functions from <cstdlib> to generate random numbers for swapping cards. The sortCards function uses std::sort algorithm from <algorithm> with a lambda function to compare cards by their name.

The Hand class is derived from Deck since it behaves like a more specialized version of a deck. It has a default constructor that sets the hand to an empty set of cards. It also overrides the print function from Deck to only print the name

Learn more about classes here:

https://brainly.com/question/27462289

#SPJ11

The correct analysis for the code snippet is the program has an error because the constructor is invoked without an argument.

The code defines a class 'A' with an __init__ constructor method that takes a parameter s and initializes the instance variable self.s with the value of 's'. The class also has a method named print that prints the value of 'self.s'.

However, when an instance of 'A' is created with a = A(), no argument is passed to the constructor. This results in a TypeError because the constructor expects an argument s to initialize self.s. Therefore, the program has an error due to the constructor being invoked without an argument.

To fix this error, an argument should be passed when creating an instance of 'A', like a = A("example"), where "example" is the value for 's'.

LEARN MORE ABOUT code snippet here: brainly.com/question/30467825

#SPJ11

This program prompts the user to enter the number of students involved in the survey and initializes an array to store the number of hours of TV watched by each student.

Certainly! Here's a C++ program that analyzes a set of data recording the number of hours of TV watched in a week by school students, as per your requirements:

```cpp

#include <iostream>

const int MAX_SIZE = 20;

// Function to read the number of hours of TV watched by each student

void readTVHours(int numStudents, int hoursArray[]) {

   for (int i = 0; i < numStudents; i++) {

       std::cout << "Enter the number of hours of TV watched by student " << (i + 1) << ": ";

       std::cin >> hoursArray[i];

   }

}

// Function to calculate the average number of TV hours watched by all students

double averageTVHours(int size, int hoursArray[]) {

   int sum = 0;

   for (int i = 0; i < size; i++) {

       sum += hoursArray[i];

   }

   return static_cast<double>(sum) / size;

}

// Function to count the number of students who exceeded the provided limit of TV watched hours

int exceededTVHours(int hoursArray[], int size, int limit) {

   int count = 0;

   for (int i = 0; i < size; i++) {

       if (hoursArray[i] > limit) {

           count++;

       }

   }

   return count;

}

int main() {

   int numStudents;

   int hoursArray[MAX_SIZE];

   std::cout << "How many students are involved in the survey? ";

   std::cin >> numStudents;

   readTVHours(numStudents, hoursArray);

   double averageHours = averageTVHours(numStudents, hoursArray);

   std::cout << "The average number of hours of TV watched each week is " << averageHours << " hours" << std::endl;

   int limit;

   std::cout << "Enter the limit of TV watched hours: ";

   std::cin >> limit;

   int numExceeded = exceededTVHours(hoursArray, numStudents, limit);

   std::cout << "The number of students who exceeded the limit of TV watched hours is " << numExceeded << std::endl;

   return 0;

}

```

This program prompts the user to enter the number of students involved in the survey and initializes an array to store the number of hours of TV watched by each student. It then uses the provided functions to calculate the average TV hours watched by all students and count the number of students who exceeded the provided limit. Finally, it displays the calculated results.

Note: Make sure to compile and run this program using a C++ compiler to see the output.

To know more about Programming related question visit:

https://brainly.com/question/14368396

#SPJ11

a) Uninterruptible

b) Interruptible

c) NO

d) NO

a) When a process blocks for a disk I/O operation to complete, it should use the uninterruptible mode of sleep. This is because during disk I/O operations, the process is waiting for a hardware resource that cannot be interrupted. If the process were to use interruptible mode, it could be woken up by a signal and would have to wait again, which could lead to unnecessary waits and slower system performance.

b) When a process blocks for getting keyboard input data from the user, it should use interruptible mode of sleep. This is because the process is waiting for a software resource that can be interrupted. The user may choose to end the input operation, and in such a case, it is better if the process can be interrupted rather than continuing to wait indefinitely.

c) In Linux device driver code, it is generally not proper for a process holding a spinlock to execute the kernel function copy_to_user. Spinlocks are used to protect critical sections of code from being executed concurrently by multiple processes. If a process holding a spinlock executes a function like copy_to_user, it may block the system, leading to poor performance. It is better to release the spinlock before executing such functions.

d) In Linux, the process scheduler cannot preempt a process holding a spinlock. This is because spinlocks are used to protect critical sections of code from being executed concurrently by multiple processes. Preempting a process holding a spinlock could lead to deadlock or other synchronization problems. Therefore, the scheduler must wait for the process holding the spinlock to release it before scheduling another process.

The answer is :

a) Uninterruptible, b) Interruptible, c) NO, d) NO

Learn more about I/O operation here:

https://brainly.com/question/32156449

#SPJ11

The share of GPU time for each of the long jobs before the arrival of the 4 short jobs was 1/8.

After the arrival of the 4 short jobs, there are a total of 8 + 4 = 12 jobs running on the machine, all of which require 1-GPU. Therefore, each job is allocated 1/12 of the total GPU time available.

Since there are still 8 long jobs running on the machine after the arrival of the short jobs, each long job will receive 8/12 or 2/3 of its original share of GPU time. Therefore, the share of GPU time for each of the long jobs now is 2/3.

Before the arrival of the 4 short jobs, there were only 8 jobs running on the machine, all of which were long jobs and required 1-GPU each. Therefore, each job was allocated 1/8 of the total GPU time available.

Hence, the share of GPU time for each of the long jobs before the arrival of the 4 short jobs was 1/8.

Learn more about GPU time here

https://brainly.com/question/31566976

#SPJ11

First, let's create the header file (let's call it "max_element.h") where we declare the function to find the maximum element from an array. The header file should contain the function prototype .

Which specifies the name and parameters of the function. For example:

c

Copy code

#ifndef MAX_ELEMENT_H

#define MAX_ELEMENT_H

int findMaxElement(int array[], int size);

#endif

In the above code, we use preprocessor directives to prevent multiple inclusions of the header file.

Next, we can create a C program (let's call it "main.c") that includes the header file and implements the function to find the maximum element. Here's an example implementation:

c

Copy code

#include <stdio.h>

#include "max_element.h"

int findMaxElement(int array[], int size) {

   int max = array[0];

   for (int i = 1; i < size; i++) {

       if (array[i] > max) {

           max = array[i];

       }

   }

   return max;

}

int main() {

   int array[] = {10, 5, 8, 20, 15};

   int size = sizeof(array) / sizeof(array[0]);

   int max = findMaxElement(array, size);

   printf("The maximum element in the array is: %d\n", max);

   return 0;

}

In the above code, we include the "max_element.h" header file and define the findMaxElement function that takes an array and its size as parameters. The function iterates over the array and keeps track of the maximum element. Finally, in the main function, we create an array and call the findMaxElement function to find the maximum element, which is then printed to the console.

By separating the function declaration in a header file, we can reuse the function in multiple C files without duplicating code. This promotes modularity and maintainability in the program.

To learn more about header file click here:

brainly.com/question/30770919

#SPJ11

To perform a wireless network WEP cracking attack, you can use tools like Aircrack-NG Suite, Fluxion, and John the Ripper.

For vulnerability analysis, you can utilize tools such as Nessus, Snort, Yersinia, and Burp Suite Scanner.

To conduct web application analysis, you can employ tools like SQLiv, BurpSuite, OWASP-ZAP, HTTRACK, JoomScan, and WPScan.

To assess databases for vulnerabilities, you can utilize SQLMap.

For password attacks, tools like Hash-Identifier and findmyhash, Crunch, and THC Hydra (ONLINE PASSWORD CRACKING SERVICE), and Hashcat can be used.

To utilize the Metasploit Framework for exploitation, payloads, auxiliary modules, encoders, and post-exploitation tasks.

Metasploit Framework can be accessed through various interfaces such as Msfconsole, msfcli, msfgui, Armitage, web interface, and CobaltStrike.

For intrusion detection system purposes, Kismet Wireless can be used.

Kali Linux is a powerful distribution designed for penetration testing and ethical hacking. It comes pre-installed with numerous tools to assist in various security-related tasks.

b. WEP (Wired Equivalent Privacy) cracking attack is a technique used to exploit weaknesses in WEP encryption to gain unauthorized access to a wireless network. Aircrack-NG Suite is a popular tool for WEP cracking, providing capabilities for capturing packets and performing cryptographic attacks. Fluxion is a script-based tool that automates the WEP cracking process. John the Ripper is a password cracking tool that can also be used for WEP key recovery.

c. Vulnerability analysis involves assessing systems and networks for security weaknesses. Nessus is a widely used vulnerability scanner that helps identify vulnerabilities in target systems. Snort is an intrusion detection and prevention system that analyzes network traffic for suspicious activities. Yersinia is a framework for performing various network attacks and tests. Burp Suite Scanner is a web vulnerability scanner that detects security flaws in web applications.

d. Web application analysis involves assessing the security of web applications. SQLiv is a tool for scanning and exploiting SQL injection vulnerabilities. BurpSuite is a comprehensive web application testing tool that includes features for scanning, testing, and manipulating HTTP traffic. OWASP-ZAP (Zed Attack Proxy) is an open-source web application security scanner. HTTRACK is a tool for creating offline copies of websites. JoomScan and WPScan are specialized tools for scanning Joomla and WordPress websites, respectively.

e. Database assessment involves evaluating the security of databases. SQLMap is a tool specifically designed for automated SQL injection and database takeover attacks. It helps identify and exploit SQL injection vulnerabilities in target databases.

f. Password attacks aim to crack passwords to gain unauthorized access. Hash-Identifier and findmyhash are tools for identifying the type of hash used in password storage. Crunch is a tool for generating custom wordlists. THC Hydra is a versatile online password cracking tool supporting various protocols. Hashcat is a powerful password recovery tool with support for GPU acceleration.

g. The Metasploit Framework is a widely used penetration testing tool that provides a collection of exploits, payloads, auxiliary modules, encoders, and post-exploitation modules. It simplifies the process of discovering and exploiting vulnerabilities in target systems.

h. Metasploit Framework provides multiple interfaces for interacting with its features. Ms

To learn more about Database Assessment

brainly.com/question/30768140

#SPJ11

This functionality enables users to easily determine the relative percentages between two numbers.

The "Percentages" class, created in Programming Exercise 3-4, includes a method called computePercent(). This method calculates and displays the percentage of the first argument with respect to the second argument. The "Percentages" program allows users to input two double values from the console. It then calculates and displays the percentage of the first value with respect to the second value, as well as the percentage of the second value with respect to the first value. This functionality enables users to easily determine the relative percentages between two numbers.

For more information on computePercent() visit: brainly.com/question/31244965

#SPJ11

In the given scenario, we have five batch jobs A through E with different estimated running times and priority values. We need to simulate the execution of these jobs using different scheduling algorithms and compute their turnaround time and average turnaround time.

In Round Robin Scheduling with a time quantum of 1 minute, we execute jobs in round-robin fashion for a fixed time quantum of 1 minute until all jobs are completed. We keep track of each job's waiting time and turnaround time. Using this algorithm, job C, with shorter estimated running time and higher priority, completes first. However, due to the time quantum constraint, some jobs may not complete in their first cycle and require additional cycles to finish, leading to increased waiting time. The average turnaround time of all jobs using Round Robin is 24 minutes.

In Priority Scheduling, we execute jobs based on their priority values. Jobs with lower priority values get executed first, followed by jobs with higher priority values. If two jobs have the same priority, First Come First Serve (FCFS) scheduling applies. Using this algorithm, job C with the highest priority value completes first, followed by jobs E, B, A, and D. The average turnaround time of all jobs using priority scheduling is 25.2 minutes.

In FCFS scheduling, we execute jobs in the order of their arrival times. Using this algorithm, job A completes first, followed by jobs B, C, D, and E. This approach does not consider the priority levels of jobs. Therefore, jobs with higher priority values may need to wait longer than those with lower priority values. The average turnaround time of all jobs using FCFS is 28.8 minutes.

In Shortest Job First scheduling, we execute jobs based on their estimated running time. Jobs with shorter running times get executed first. Using this algorithm, job C with the shortest estimated running time completes first, followed by jobs D, B, E, and A. This approach considers the execution time required for each job, leading to lower turnaround times for shorter jobs. The average turnaround time of all jobs using Shortest Job First scheduling is 15.4 minutes.

In summary, employing different scheduling algorithms leads to different turnaround time and average turnaround time values. Round Robin and Priority Scheduling algorithms consider the priority levels of jobs, while FCFS scheduling prioritizes the order of arrival times. Shortest Job First scheduling focuses on the estimated running time of jobs, leading to lower turnaround times for shorter jobs.

Learn more about algorithms  here:

  https://brainly.com/question/21172316

#SPJ11

Answer:

Windows Defender is a built-in antivirus and anti-malware software in Windows 10 that helps protect your computer from viruses, malware, and other malicious software. It constantly scans your computer for any threats and provides real-time protection by blocking any suspicious activity. It also includes features such as firewall and network protection.

Explanation:

Brainliest Plssss

In the given task, a list is considered "good" if starting from the first index, you continuously jump the number of indexes equal to the value at the current index and eventually land on the final index without going over.

For example, the list [0] is considered good because there is no need to jump, while the list [5,2] is considered bad because starting from index 0, jumping 5 indexes would go beyond the list length.

To determine if a list is "good," we iterate through each index and check if the value at that index is within the bounds of the list length. If it is not, we consider the list "bad" and exit the loop. Otherwise, we update the current index by jumping the number of indexes indicated by the value at that index. If we reach the end of the list without going over, the list is considered "good."

For more information on lists visit: brainly.com/question/29642425

#SPJ11