hi anywhere door!
In the above query, we use system function now() to get current datetime. Then we use INTERVAL clause to filter those records where order_date falls after an interval of 15 days before present datetime. The DATEADD() function adds a time/date interval to a date and then returns the date.
Functions - Data School
DATE and TIME values in PostgreSQL have a whole special set of functions and operators for their proper use.
[tex] \: [/tex]
triad wants to setup a secure pipe from one data center to another. they want a protocol that performs tunneling. make a recommendation?
The most suitable protocol for tunneling that Triad can use to establish a secure pipe from one data center to another is IPSec (Internet Protocol Security).
IPSec is a network protocol suite that authenticates and encrypts internet protocol (IP) data packets to secure data transmission over an IP network. It is widely used in Virtual Private Networks (VPNs) to secure communication channels between two networks over the internet or between remote users and a private network.
IPSec provides confidentiality, integrity, and authenticity for internet protocol data packets in a network. It creates a secure connection by encapsulating the original IP packets and encrypting them using security protocols such as Authentication Header (AH) and Encapsulating Security Payload (ESP). IPSec also supports different modes of operation for different applications, such as transport mode, tunnel mode, and hybrid mode.
Tunnel mode is the most commonly used mode in IPSec VPNs. In tunnel mode, the entire IP packet, including the original header, is encapsulated and encrypted. This mode is preferred when two networks are connected over the internet, and the original IP header may not be trusted or may be modified during transmission. Therefore, tunnel mode provides end-to-end security and integrity for the data transmission between two networks. Thus IPSec is the most suitable protocol for tunneling that Triad can use to establish a secure pipe from one data center to another.
Learn more about network: https://brainly.com/question/8118353
#SPJ11
Which of these statements regarding time-cost tradeoffs in CPM networks is true?
a. Crashing is not possible unless there are multiple critical paths.
b. Crashing a project often reduces the length of long-duration, but non-critical, activities.
c. Activities not on the critical path can never be on the critical path, even after crashing.
d. Crashing shortens the project duration by assigning more resources to one or more of the critical tasks.
e. None of the above.
The correct statement regarding time-cost tradeoffs in CPM networks is d. Crashing shortens the project duration by assigning more resources to one or more of the critical tasks.
Time-cost tradeoffs are a technique used in project management to speed up project completion by trading time with money. Time-cost tradeoffs involve accelerating the project's time frame by allocating additional resources (usually labor) to the project.
By adding more resources, the project team will complete more tasks in less time, resulting in shorter project completion times.
Crashing is achieved by increasing the resources required for the activities, which may include adding additional personnel or other resources. Crashing does not affect the scope of the project, only the time required to complete it.
Fast tracking: The process of overlapping project activities that would otherwise be completed sequentially is known as fast tracking.
Fast tracking can also result in increased risk because tasks are being performed simultaneously instead of sequentially.
For such more question on networks:
https://brainly.com/question/28342757
#SPJ11
what are three uses or attributes that can be modified with the texture mapping (application) besides changing just the color?
Three uses or attributes that can be modified with texture mapping besides color are:
Adding details such as shadows or highlightsAdding a bump map to give an image a 3D feelAdding environmental effects such as snow, rain, or windTexture mapping is an application that can be used to add a variety of attributes to a 2D or 3D image. Texture mapping is a method of wrapping a 2D image, called a texture, around a 3D object in computer graphics. Texture mapping is used to add details to the surface of 3D models, like adding texture to a wall or skin to a character.
These three attributes can greatly enhance an image and provide more realistic details. With texture mapping, you can customize your image to look exactly how you want it to.
Learn more about texture https://brainly.com/question/14375831
#SPJ11
you have transferred an encrypted file across a network using the server message block (smb) protocol. what happens to the file's encryption? answer the file is unencrypted when moved. the encryption carries over to the new location. the encryption inherits from the new location. an encrypted file cannot be moved using smb.
Using the server message block (SMB) protocol, you have moved an encrypted file across a network. The encryption of the file is compromised if it is moved because it is decrypted.
What is meant by encrypted?Data encryption is a computational procedure that converts plaintext/cleartext (unencrypted, human-readable data) into ciphertext (encrypted data), which is only accessible by authorized users with the correct cryptographic key.For both individuals and businesses, encryption is a crucial safeguard against the hacking of critical data. For instance, to guard against fraud and identity theft, websites that transmit credit card and bank account numbers encrypt sensitive data. Think about it playing: When you use your computer or mobile device to do activities like online shopping, browsing the web, or reading email, encryption helps to keep you safe. It is crucial to computer security, helps to safeguard data and systems, and guards against identity theft.To learn more about encrypted, refer to:
https://brainly.com/question/20709892
which of the following is not an example of a complementor? multiple choice microprocessors and laptops automobiles and gasoline stations theme parks and hotels gyms and fitness equipment newspapers and internet news providers
Newspapers and internet news providers are not examples of complementors.
What are complementors?
Complementors are products, services, or businesses that complement each other and work together to increase demand and revenue for both parties. They are essentially partners that provide added value to each other's offerings.
In the context of business strategy, complementors are often discussed in relation to the concept of the "value chain." A value chain is a series of activities that a business performs to deliver a product or service to its customers. Complementors are businesses that provide products or services that fit within the value chain of another business and help to create more value for customers.
Examples of complementors include microprocessors and laptops, which work together to create a functional computing system. Automobiles and gasoline stations are also complementors, as people need gasoline to fuel their cars. Theme parks and hotels, gyms and fitness equipment are also examples of complementors.
Newspapers and internet news providers, on the other hand, are not complementors, as they are not typically part of the same value chain. While they may compete for consumers' attention and advertising revenue, they do not directly complement each other's products or services.
To know more about internet visit:
https://brainly.com/question/21565588
#SPJ1
Which one of the following wireless transmission types requires a clear LOS to function?
LOS means Line of Sight
The wireless transmission types requires a clear LOS to function is Infrared (IR).
It is a high-frequency radio wave technology that operates in the microwave frequency range between 1 GHz and 100 GHz.Microwave transmission requires a clear Line of Sight (LOS) between the transmitting and receiving antennas, which means that there must be no physical obstructions in the path of the transmission. Any obstacles, such as buildings, trees, mountains, or other objects, can block or weaken the signal, resulting in a weak or lost connection.
So infrared is the answer from the question " Which one of the following wireless transmission types requires a clear LOS to function?".
Learn more about wireless transmission: https://brainly.com/question/28483860
#SPJ11
match the vocabulary to its definition group of answer choices inheritance allowing an entity such as a variable, method, or an object to have more than one form. superclass [ choose ] object class [ choose ] subclass [ choose ] class hierarchy [ choose ] polymorphism [ choose ] extends [ choose ] is-a [ choose ] overriding [ choose ] overloading
Inheritance: allows an object to have more than one for , a class from which additional classes are descended, Object class: a class used as the foundation for the creation of objects
What is inheritance in Java defined as and how is it explained?The concept of inheritance in Java refers to the transfer of properties from one class to another, such as the relationship between a father and son. Java's concept of inheritance is the process of gaining all of an object's parent object's behaviours.
What is inheritance, exactly?By inheritance, genetic information is passed from parent to child. Members of the same family typically share traits in common because of this.
To know more about Java visit:-
https://brainly.com/question/29897053
#SPJ1
when should a program explicitly use the this reference? group of answer choices accessing a field that is shadowed by a local variable accessing a public variable accessing a private variable accessing a local variable
A program should explicitly use the "this" reference when accessing a field that is shadowed by a local variable.
In Java, the keyword "this" is a reference variable that refers to the present object. It is utilized to refer to an instance variable or a constructor from a constructor. However, it can also be used to return the present class's instance. The following are some situations when the program should explicitly use the this reference:
When the local variable has the same name as the class fieldWhen the method parameter has the same name as the class fieldLearn more about local variable: https://brainly.com/question/24657796
#SPJ11
the disk arbitration feature in macos is used to disable and enable automatic mounting when a drive is connected via a usb or firewire device. true false
The statement "The disk arbitration feature in macOS is used to disable and enable automatic mounting when a drive is connected via a USB or FireWire device" is TRUE.
What is disk arbitration?Disk arbitration is a mechanism that macOS uses to control the connection of storage devices. When a new storage device, such as an external hard drive, USB stick, or SD card, is inserted into a Mac, the system consults its database of drivers and loaded kernel extensions to see if it recognizes the device in question.
When it identifies the drive, it assigns it a special name, such as /Volumes/MyExternalDisk. Afterward, the disk arbitration system will tell the Finder to display a desktop icon for the volume so that the user can access its files.
Disk arbitration can also assist with assigning volumes to specific applications. When an application that has previously registered an interest in certain types of devices, such as a digital camera, is opened, disk arbitration will cause the Finder to open the device's volume and display the files stored on it.
Learn more about system: https://brainly.com/question/1763761
#SPJ11
The statement "The disk arbitration feature in macOS is used to disable and enable automatic mounting when a drive is connected via a USB or Firewire device" is True.
Disk Arbitration is a macOS technology that aids in the discovery, configuration, and management of disks attached to the computer. It keeps track of when disks are mounted, unmounted, and ejected, and it manages the task of mounting disks that appear as a result of auto-discovery.
When a new disk is detected, Disk Arbitration sends a notification to interested applications, allowing them to respond appropriately (e.g., by updating the user interface, launching backup software, etc.). This improves the user experience by ensuring that applications are aware of disk-related events as soon as possible.
The disk arbitration feature in macOS is used to disable and enable automatic mounting when a drive is connected via a USB or Firewire device. This means that when Disk Arbitration is enabled, macOS will automatically mount disks when they are connected, and when it is disabled, macOS will not automatically mount disks.
Learn more about disk arbitration:https://brainly.com/question/4779318
#SPJ11
true (yes) or false (no). for the rsa encryption scheme, 3 and 65537 are commonly used as the public key. can the number 20 be used as the public key? why or why not?
False. In RSA encryption, the public key cannot be the integer 20. A big prime number, normally produced by the RSA technique, must be the public key.
Large composite numbers are challenging to factor into their prime factors, which is how RSA encryption works. With RSA encryption, the number 20 cannot be the public key. The public key has to be a big prime integer, which is commonly produced via the RSA method. The process of selecting two big primes and multiplying them together produces the public key in most cases. The modulus for encryption and decryption is then the resultant number.
20 is not a prime number and is too tiny to offer sufficient encryption protection. A tiny or non-prime integer being used as the public key might make it simpler for an attacker to decrypt the data and get access.
learn more about RSA encryption here:
https://brainly.com/question/30905550
#SPJ4
What information is used by TCP to reassemble and reorder received segments? a. fragment numbers 7 b. acknowledgment numbers on c. port numbers d. sequence numbers
TCP uses sequence numbers to reassemble and reorder received segments. The correct option among the given options is d) Sequence numbers.
What is TCP?TCP stands for Transmission Control Protocol, and is one of the main protocols of the Internet protocol suite. It can ensure that all data packets sent between devices are received correctly and accurately.
TCP operates at the transport layer of the OSI model and is a connection-oriented protocol. It also requires a virtual circuit to be established between devices before communication can begin.
For more information about TCP, visit:
https://brainly.com/question/17387945
#SPJ11
anya configures biometric security for a military installation to admit/deny entry using facial recognition. in this case, which error rate is likely to allow to be relatively high
When anya configures biometric security for a military installation to admit/deny entry using facial recognition, the error rate that is likely to allow to be relatively high is the False Rejection Rate (FRR).
False Rejection Rate (FRR) is a biometric authentication metric that refers to the number of times an authentic user is denied access to a system or application because the biometric sensor or algorithm incorrectly rejected the biometric sample. A high FRR leads to increased frustration and delays, and it is particularly serious in critical security applications like military installations, as it can result in the denial of access to authorized personnel.
In a military installation, a high FRR will lead to long lines, unnecessary delays, and difficulties in verifying personnel. Hence, when configuring biometric security for a military installation to admit/deny entry using facial recognition, it is essential to ensure that the False Rejection Rate (FRR) is kept low. The lower the FRR, the more efficient and effective the security system is, and the fewer frustrations and delays encountered by authorized personnel attempting to gain access to the military installation.
Know more about military installations click here:
https://brainly.com/question/14443460
#SPJ11
JAVA PROGRAMMING PLS HELP WILL GIVE BRAINLIEST
Write a program into which we could enter Lily’s Longitude and Latitude data. Each time a new longitude and latitude is entered it should ask if you want to continue - the program should continue to ask for input if the user enters 1, and stop when the user enters 0. If an invalid pair of coordinates entered by the user (i. E. With latitude not between -90 and 90 inclusive or longitude not between -180 and 180 inclusive) then the program should print "Incorrect Latitude or Longitude".
Once the user has finished inputting data, the program should display the farthest distance traveled by Lily in each direction (you may assume the user has entered at least one valid longitude/latitude pair). However any invalid pairs of coordinates should be ignored when calculating these values - this includes ignoring a valid latitude if it is entered with an invalid longitude and vice-versa.
The farthest points are given by:
Farthest North - maximum latitude
Farthest South - minimum latitude
Farthest East - maximum longitude
Farthest West - minimum longitude
Please note - you are not expected to enter all of Lily's data into your program: you can simply make up some sample data points if you wish
Here's an example Java program that allows the user to input Lily's longitude and latitude data, validates the inputs, and calculates the farthest distance traveled by Lily in each direction:
import java.util.Scanner;
public class LilyLocation {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
double longitude, latitude;
double maxLatitude = -91, minLatitude = 91, maxLongitude = -181, minLongitude = 181;
int choice = 1;
while (choice == 1) {
System.out.print("Enter Lily's longitude: ");
longitude = input.nextDouble();
System.out.print("Enter Lily's latitude: ");
latitude = input.nextDouble();
if (longitude < -180 || longitude > 180 || latitude < -90 || latitude > 90) {
System.out.println("Incorrect Latitude or Longitude");
} else {
if (latitude > maxLatitude) {
maxLatitude = latitude;
}
if (latitude < minLatitude) {
minLatitude = latitude;
}
if (longitude > maxLongitude) {
maxLongitude = longitude;
}
if (longitude < minLongitude) {
minLongitude = longitude;
}
}
System.out.print("Do you want to continue? Enter 1 for Yes and 0 for No: ");
choice = input.nextInt();
}
System.out.println("Farthest North: " + maxLatitude);
System.out.println("Farthest South: " + minLatitude);
System.out.println("Farthest East: " + maxLongitude);
System.out.println("Farthest West: " + minLongitude);
}
}
In this program, we use a while loop to continuously ask the user for input until they enter 0. We use if statements to validate the inputs, and we use four variables to keep track of the farthest points in each direction. Finally, we print out the farthest points calculated.Note that you can test this program by inputting valid and invalid longitude and latitude pairs to see how it handles the inputs.
To learn more about Java click the link below:
brainly.com/question/28878600
#SPJ4
you have an integer array of length 5. what is the number of swaps needed to sort it using the selection sort in the worst case?
In selection sort, the algorithm selects the minimum element from the unsorted part of the array and places it at the beginning of the unsorted part. The process repeats until the entire array is sorted.
In the worst case scenario, the array is in reverse order. For an array of length 5, the number of swaps needed to sort it using selection sort in the worst case can be calculated as follows:
The first pass selects the minimum element and swaps it with the first element. This requires 1 swap.The second pass selects the second minimum element and swaps it with the second element. This requires 1 swap.The third pass selects the third minimum element and swaps it with the third element. This requires 1 swap.The fourth pass selects the fourth minimum element and swaps it with the fourth element. This requires 1 swap.The fifth pass selects the fifth minimum element and swaps it with the fifth element. This requires 0 swaps, as the last element is already in its correct position.Therefore, in the worst case, a total of 4 swaps are needed to sort an integer array of length 5 using selection sort.
Learn more about selection sort here brainly.com/question/13161882
#SPJ4
you need to install wireless internet access in an open warehouse environment. after installing the equipment, the technician notices varying signal strengths throughout the warehouse. how do you make sure there is full coverage?
To ensure full coverage in a warehouse environment, the technician should install multiple access points and configure them in a mesh network.
How to ensure full coverage?The following steps can be followed to ensure there is full coverage in a wireless internet network in an open warehouse environment:
Placement of wireless access points should be taken into account. Install the access points in strategic locations throughout the warehouse where the signal is weak or non-existent.Install a wireless signal booster. A wireless signal booster can assist to increase the range and strength of wireless signals from the access point to the wireless network device such as laptops or smartphones.Use a different wireless channel. Use a wireless channel that does not have many wireless signals from other networks that could cause interference with the wireless signals of the network.Install additional access points. Installing additional access points in the warehouse can assist to strengthen the wireless network signal in the area where it is weak, guaranteeing full coverage of the wireless network.Learn more about wireless network at
https://brainly.com/question/3454559
#SPJ11
Sometimes, lenders allow or require a down payment before they extend you the loan. What would be the advantage to the lender? What would be the advantage to the borrower?
Answer:
For the borrower, it is beneficial for them to pay the down payment because you minimize the amount borrowed, lowered monthly payments & less interest expense. For the lender, it allows for faster approval, flexibility on payments & tax advantages.
Explanation:
are the standard for business documents and come in both personal and network versions. a. line printers b. dot-matrix printers c. laser printers d. ink-jet printers
Laser printers are the standard for business documents and come in both personal and network versions. Option c is correct.
Laser printers provide high-quality prints at a relatively fast speed and can handle a variety of paper types. Laser printers are the most popular choice for printing business documents because of their speed, quality, and reliability. They are capable of printing large volumes of documents quickly and efficiently, making them ideal for use in office environments. They also produce high-quality prints with crisp text and sharp graphics, making them suitable for printing professional-looking documents.
Business document is a term used to refer to a wide range of documents that are used in the day-to-day operations of an organization. This can include letters, memos, reports, invoices, receipts, and many others. The main purpose of these documents is to provide a clear and concise communication of information between different parties.
Learn more about business document https://brainly.com/question/4431540
#SPJ11
a user is experiencing problems logging in to a linux server. he can connect to the internet over the local area network. other users in the same area aren't experiencing any problems. you attempt logging in as this user from your workstation with his username and password and don't experience any problems. however, you cannot log in with either his username or yours from his workstation. what is the likely cause of the situation explained in the given scenario?
The likely cause of the situation explained in the given scenario is that there is an issue with the user's workstation.The scenario indicates that a user is experiencing problems logging in to a Linux server.
However, the user can connect to the internet over the local area network. Other users in the same area aren't experiencing any problems. The issue could, therefore, be with the user's workstation. When you attempt to log in as the user from your workstation with his username and password, you don't experience any problems.However, you cannot log in with either his username or yours from his workstation. This means that the issue is not with the user's credentials but with the workstation.
Learn more about user's workstation: https://brainly.com/question/14366812
#SPJ11
if quality assurance personell ask a techinican a question during an ins;pection, the response should be?
If a quality assurance personnel asks a technician a question during an inspection, the response should be clear, honest, and accurate. The technician should answer the question to the best of their knowledge and provide any relevant information that may be useful for the inspection.
If the technician is unsure about the answer or does not have enough information to provide an accurate response, they should indicate this to the quality assurance personnel and offer to follow up with additional information. It is important for the technician to remain professional and respectful during the inspection, and to provide any necessary documentation or evidence to support their response.
Find out more about quality assurance personneat l
brainly.com/question/14399220
#SPJ4
the subject of data mining deals with group of answer choices keeping data secure so that unauthorized individuals cannot access the data. methods for developing useful decision-making information from large data bases. computing the average for data. computational procedure for data analysis.
Data mining is a method of obtaining useful information and insights from a large dataset. It's an essential step in the process of data preparation that involves data cleansing and preparation. It aids in the creation of meaningful data that can be utilized to make informed judgments and decisions.
Methods for developing useful decision-making information from large data bases is the subject of data mining. Additionally, data mining is used to identify trends in data that are not always noticeable to humans. It employs a variety of analytical tools to extract useful information from a vast amount of data, such as statistical algorithms, clustering, and artificial intelligence techniques.
Data mining techniques are used in various sectors, including retail, health care, finance, and manufacturing, among others. Companies and corporations use data mining methods to gain valuable insights into customer behaviors and preferences, market trends, and other factors that can impact their business decisions. Furthermore, data mining can assist in the identification of fraudulent activity and security breaches within an organization. Data mining algorithms can also be used to monitor network security and detect any anomalies that may pose a risk to the system.
Learn more about Data mining: https://brainly.com/question/28148157
#SPJ11
12. users at cloud kicks want to be able to create a task that will repeat every two weeks. what should an admin do to meet this requirement?
A job that will repeat every two weeks is something that cloud kicks users want to be able to create. Allow Creation of Recurring Tasks is what an admin must do to fulfill this criterion.
What is the purpose of creation technology?In order to help our OEM partners build their businesses, Creation Technologies, a leading global provider of electronics manufacturing services, offers solutions. Creation offers a comprehensive array of design, production, supply chain, and after-market services, which we may customize to meet the specific requirements of each firm or product.The services provided by Creation include design, new product introduction (NPI), PCBA and full integration manufacturing, order fulfillment services, supply chain solutions, and after-market services (AMS).Both Creation Financial Services Limited and Creation Consumer Finance Limited make up Creation. In conjunction with these two businesses, Creation issues credit cards, store cards, personal loans, and retail financing to customers both directly and via well-known high street merchants.To learn more about Creation, refer to:
https://brainly.com/question/28157297
what is the lowest interrupt frequency that a timer/pwm module on a kl25z mcu can generate? assume the cpu clock is 48 mhz.
The lowest interrupt frequency that can be generated by the timer/PWM module on a KL25Z MCU is 375 Hz.
The KL25Z MCU has a built-in timer/pulse width modulation (PWM) module that can generate interrupts at a very low frequency. The lowest interrupt frequency that can be generated by this module depends on the clock source used by the timer. The KL25Z MCU has a 48 MHz internal clock, which can be divided by a prescaler to obtain a lower clock frequency for the timer.
Assuming a prescaler value of 128, the timer/pwm module can generate interrupts at a frequency as low as 375 Hz. This is calculated as follows:
Divide the CPU clock frequency by the prescaler value: 48 MHz / 128 = 375 kHz
Divide the timer clock frequency by the desired interrupt frequency: 375 kHz / 1000 Hz = 375
Find out more about microcontroller programming
brainly.com/question/30429933
#SPJ4
Can I use a charger that has 65w on my dell inspiron 15 5570 that normally takes 45w? The input of my laptop is 19.5V---3.31A/3.34A, and the output of the charger is 19.5v----3.34A. Write the answer in 3-5 sentences. (5 points)
Answer:
Yes, as the values are very similar and will generally be fine.
Explanation:
In general, it is safe to use a charger with a higher wattage than the one specified for your laptop as long as the voltage and amperage ratings match or are very close. In this case, since the input of the Dell Inspiron 15 5570 is 19.5V with an amperage rating of 3.31A/3.34A, and the charger you are considering has an output of 19.5V with an amperage rating of 3.34A, these values are very close and it should be safe to use the higher-wattage charger. However, using a charger with a much higher wattage than the one specified for your laptop, or one with significantly different voltage or amperage ratings, could potentially damage your laptop or cause a safety hazard.
you are testing a program with a while loop. which of the following test cases can be ignored (select one best option that you do not have to try)? briefly explain why. a. skip the loop entirely b. run the loop once c. run the loop a few times d. run the loop forever
When you are testing a program with a while loop, the test cases that can be ignored is option A (skip the loop entirely) is the best option that you do not have to try.
You can skip the loop entirely because it is unlikely to reveal any bugs or issues. A while loop is a type of loop that will continue to execute as long as the condition is true. It is a good idea to test the program with a while loop since it helps to make sure that the code is working as intended.
In this case, you do not need to test the case where you run the loop forever since it is likely to cause an infinite loop. Additionally, it is not necessary to test the loop multiple times since this is unlikely to reveal any bugs or issues that running the loop once would not reveal.
Learn more about while loop :https://brainly.com/question/26568485
#SPJ11
Morgan is the operations manager for a national appliance distributor. The company has offices throughout the United States. Communication between offices is vital to the efficient operation of the company. Phone sales are an important source of revenue.
Managers and department heads across the nation strategize on a weekly, if not daily, basis. For the past three quarters, telephone charges have increased and sales have decreased. Morgan needs to cut expenses while keeping the lines of communication open.
Analyze the telecommunications technologies you've studied in this unit—fax, broadcasting, VoIP, e-mail, blogs, and wikis—to determine which technology will best meet the needs of Morgan's company.
Once you have determined the best technology solution, use the Internet to compare the features and pricing offered by different providers of that technology. Select four or five criteria you think would be most important to Morgan. Create a comparison chart to help compare the products and services offered by providers of the technology you selected.
Write down the technology you selected for Morgan's company and the reason for your choice.
Then select a provider for Morgan to use. Indicate the reason(s) for your choices.
Answer:
Your objectives are to evaluate the use of different telecommunications technologies for performing a specific business purpose.
Using a spreadsheet, compare similar telecommunications technologies.
Use decision-making strategies to select the most appropriate telecommunications technology for a specific business need.
Explanation:
you are helping a friend who is opening a small tax preparation firm. she needs to set up an office network for five users. her office will need internet access, and because she is dealing with confidential financial information, security is a big concern. your friend wants the tax prep agents to be able to let clients connect their wireless devices to the network. how should the password be and which password should she tell the agents to give to clients?
To ensure network security, your friend should set up a strong and unique password for the office network.
How should this be set up?The password should consist of a mix of uppercase and lowercase letters, numbers, and symbols, and it should be at least 12 characters long. Additionally, the office network should use WPA2 encryption, which provides stronger security than older encryption standards.
For clients who need to connect their wireless devices to the network, your friend should set up a separate guest network with a different password.
This password should be easy to remember and should be changed frequently. It's also a good idea to limit the guest network's bandwidth and to enable a captive portal, which requires clients to agree to certain terms and conditions before accessing the network.
Read more about passwords here:
https://brainly.com/question/30034044
#SPJ1
what is the name of the data type for a character in python? group of answer choices chr char character python does not have a data type for characters. they are treated as strings.
In Python, a character is represented by a string data type. The string data type is denoted by the "str" keyword, which is short for "string".
A string is a sequence of characters that can be enclosed in either single or double quotes. Characters within a string can be accessed by indexing or slicing the string. Strings are a fundamental data type in Python and are used extensively in programming. They can be used for a wide variety of purposes, including storing and manipulating text data, as well as encoding and decoding data in various formats. Python provides a rich set of built-in functions and methods for working with strings, making it easy to manipulate them in a variety of ways.
Learn more about python here: brainly.com/question/30427047
#SPJ4
you know that installing windows server includes storage services by default. why can't you then create and manage smb shares using server manager? what must be installed first? question 9 options: server for nfs role service file and storage services role advanced storage services role service file server role service
File Server role service is installed initially. In order to store and make data BLOBs accessible to clients, the file server assumes the role of a computer or server, acting as a hub for the storage and file sharing of networked files.
What is local area network?A local area network is a type of computer network that connects computers in an area that is relatively small, like a home, school, lab, university campus, or office building. A wide area network, on the other hand, typically uses leased telecommunications circuits and spans a greater geographic area. Local area network is what it means. A LAN is a network that is contained inside a small geographic region, typically within the same building, while a network is a group of two or more connected computers. Common instances of LANs include WiFi networks in homes and small business networks.A local area network, or LAN, is a type of computer network made up of access points, cables, routers, and switches that allow devices to connect to web servers and internal servers located within a single structure or campus. They could be restricted to a single local area network (LAN) or accessible through the internet.To learn more about local area network, refer to:
https://brainly.com/question/8118353
you need to insert the abc module into the linux kernel. this module does not have any dependencies. what is the best utility to use?
The best utility to use to insert the abc module into the Linux kernel would be "insmod."
The Linux kernel is the foundation of the Linux operating system, responsible for managing system resources, managing access to resources, and managing hardware, software, processes, and files. The kernel serves as an intermediary between the user interface and the system's hardware.
It is critical to have the correct modules installed into the kernel to ensure that the system functions correctly. Each module is a piece of code that can be installed or removed from the Linux kernel without the need for a reboot. To insert the abc module into the Linux kernel, the best utility to use would be the insmod.
The insmod utility, short for insert module, is a Linux command that is used to install loadable kernel modules into the Linux kernel. Once installed, the kernel module can be used to modify the kernel's behavior or expand its capabilities. A module is typically used for device drivers or for support for new filesystems.
The insmod command is used as follows: insmod module_name Where module_name is the name of the module that needs to be installed. If the module is successfully installed, there will be no output from the insmod command. If there is an error, it will be displayed on the screen.
For such more question on insmod:
https://brainly.com/question/29452749
#SPJ11
If the _____ is a pathway for information, the _____ is one type of content that travels along that path.
Select one:
a. Internet; web
b. web; text
c. web; Internet
d. hardware; software
Answer:
The answer is A. Internet; web.
Explanation:
The Internet is a global network of interconnected computer networks, which allows for the exchange of information between devices across the world. The Internet is like a highway or pathway that allows data to travel between computers and other devices.