Write down the two decision variables of a household or the two goods (including both market and non-market goods) in a one-period RBC model

Answers

Answer 1

In a one-period RBC (real business cycle) model, there are two decision variables of a household or two goods, including both market and non-market goods. These two decision variables are consumption and leisure.

Consumption and leisure are the two decision variables of a household or two goods in a one-period RBC model.

In an RBC model, consumption and leisure are the two decision variables that a household must make to maximize its utility. The utility function of a household is expressed as U(C, L), where C represents consumption, and L represents leisure time. By solving the optimization problem, households determine how much they should consume and how much time they should devote to leisure.

C is a market good, which can be purchased by households at the market price. L is a non-market good, which cannot be purchased in the market. Instead, leisure time is earned by households by working less. The more time households spend working, the less leisure time they have. The opportunity cost of leisure is the wage rate, which is the amount of money households can earn by working an extra hour.

The optimization problem that households must solve can be written as:

Max U(C, L) subject to Y = C + S

where Y is income, S is saving, and Y - C is consumption. Households must decide how much to consume and how much to save in the current period. They also must decide how much leisure time to take and how much to work. The amount of saving in the current period will be used to finance consumption in the next period.

Learn more about The opportunity cost: https://brainly.com/question/32201649

#SPJ11


Related Questions

Which characteristic is least appropriate for an emergency action plan

Answers

The least appropriate characteristic for an emergency action plan in a business context is inflexibility.

An emergency action plan is a crucial component of any business's preparedness and response strategy. It outlines procedures and guidelines to ensure the safety and well-being of employees, visitors, and assets during emergency situations. While there are several essential characteristics that an effective emergency action plan should possess, one characteristic that is least appropriate is inflexibility.

Here's an explanation of why inflexibility is not suitable for an emergency action plan:

1. Adaptability to Various Scenarios: Emergencies can vary in nature and severity, ranging from natural disasters to accidents or security threats. An effective emergency action plan should be adaptable to address different types of emergencies. It should provide guidelines and procedures that can be adjusted and tailored to specific situations, rather than being rigid and unyielding.

2. Real-Time Decision-Making: During an emergency, circumstances can change rapidly, requiring quick decision-making and flexibility. An inflexible plan may hinder the ability to make timely adjustments based on evolving conditions. A responsive and adaptable plan allows for real-time decision-making, taking into account new information and circumstances as they arise.

3. Employee Engagement and Ownership: Involving employees in the development and implementation of an emergency action plan is crucial for its effectiveness. Employees possess valuable knowledge and insights about their work environment and can contribute to identifying potential risks and appropriate response strategies. An inflexible plan may discourage employee engagement and ownership as it does not allow for their input and suggestions.

4. Continuous Improvement: An effective emergency action plan should be subject to periodic review and improvement. As new information, technologies, and best practices emerge, it is essential to update and refine the plan accordingly. An inflexible plan may hinder the process of continuous improvement, preventing the incorporation of new knowledge and advancements.

5. Legal and Regulatory Compliance: Emergency action plans often need to comply with specific legal and regulatory requirements. These requirements may change over time, necessitating updates to the plan. An inflexible plan may fail to meet evolving compliance standards, potentially leading to legal and operational risks.

In conclusion, an inflexible emergency action plan is not suitable for a business context. The plan should be adaptable, allowing for adjustments based on various scenarios, real-time decision-making, employee engagement, continuous improvement, and compliance with legal and regulatory requirements. Flexibility ensures that the plan remains relevant and effective in addressing emergencies while prioritizing the safety and well-being of individuals and the business as a whole.


To learn more about business click here: brainly.com/question/29896340

#SPJ11

Answer the following questions: Instructions: in part a, round your answers to 2 decimal places. In part b, round your answers to 1 decimal place. In part c, enter your answers as a whole number. a. What will the multiplier be given the MPS values below? Fill in the table with your answers. b. What will the multiplier be given the MPC values below? Fill in the table with your answers. c. How much of a change in GDP will result if firms increase their level of investment by $8 billion and the MPC is 0.80 ? $ bilion How much of a change in GDP will result if firms increase their level of investment by $8 bilion and the MPC instead is 0.67. $ bilion

Answers

Part aThe marginal propensity to save (MPS) is the proportion of each additional dollar of disposable income that households and individuals save rather than spend on consumption.

The formula for calculating the multiplier is simple: 1/MPS. For instance, if the MPS is 0.2, the multiplier will be 1/0.2, or 5.a. Calculation of multiplier given MPS valuesMultiplier = 1/MPSMPSMultiplier0.20.250.33More than 100 wordsPart bThe marginal propensity to consume (MPC) is the proportion of each additional dollar of disposable income that households and individuals spend rather than save.

The formula for calculating the multiplier is equally simple: 1/(1-MPC). For instance, if the MPC is 0.6, the multiplier will be 1/(1-0.6), or 2.5.b. Calculation of multiplier given MPC valuesMultiplier = 1/(1-MPC)MPCMutiplier0.60.42.50.8Part cThe GDP multiplier effect is used to quantify the effect of any changes in investment spending on GDP.

If firms increase their level of investment by $8 billion, then the GDP will rise by a certain amount. The formula for calculating the change in GDP due to changes in investment is

∆Y = ∆I × (1/MPS) or ∆Y = ∆I × (1/1-MPC).When the MPC is 0.80,∆Y = ∆I × (1/MPS)∆Y = $8 billion × (1/0.20) = $40

billionWhen the MPC is 0.67,∆Y = ∆I × (1/(1-MPC))∆Y = $8 billion × (1/0.33) = $24 billionConclusionIn conclusion, given the MPS values, the MPC values, and an investment spending change of $8 billion, the change in GDP will be $40 billion when the MPC is 0.80 and $24 billion when the MPC is 0.67.

To know more about disposable visit:

https://brainly.com/question/29909905

#SPJ11

Hileit bote Faire 6 Yakint ditisfinaluty P. Rersherate Thue c. Hours of operation d. Marketing Plan The Michelin Tire Company in 1900 published a guide to ITALY that introduce pictorial symbols to indicate the facilities in good accommodation Select ane: True False Traditionally, marketers have been charged with understanding custornefis and presenting customer needs to different bepartinents? Select one: True False Cantomer needs cat be defined an: a state of fet depeivation in a person: Select one: True Falso "Time is the currency of having NNO experiences", soseph Pine Select one: Trie False

Answers

Hileit bote Faire 6 Yakint ditisfinaluty P. Rersherate Thue c. Hours of operation d. Marketing PlanThe Michelin Tire Company in 1900 published a guide to ITALY that introduced pictorial symbols to indicate the facilities in good accommodation.

(True)Traditionally, marketers have been charged with understanding customer's needs and presenting customer needs to different departments. (True)Customer needs cannot be defined as a state of deprivation in a person. (False)According to Joseph Pine, "Time is the currency of having NO experiences." (True)Hileit bote Faire 6 Yakint ditisfinaluty P. Rersherate

Traditionally, marketers have been charged with understanding customer's needs and presenting customer needs to different departments:

Traditionally, marketers have been responsible for understanding the needs of their customers. They have also been responsible for presenting customer needs to different departments. This has been done to ensure that different departments are working towards the same goal. It has also helped to ensure that customers' needs are being met.Customer needs cannot be defined as a state of deprivation in a person:Customer needs cannot be defined as a state of deprivation in a person. Customer needs are simply the things that customers want or need. This could be a product, a service, or something else. Customers may want or need different things depending on their situation, but it is not related to deprivation.

According to Joseph Pine, "Time is the currency of having NO experiences":

"Time is the currency of having NO experiences" is a quote by Joseph Pine. The quote suggests that time is very valuable. Time cannot be bought, and once it is gone, it cannot be recovered. The quote suggests that it is important to make the most of the time that we have. We should try to have as many experiences as possible because that is how we spend our time.

To know more about accommodation visit :

https://brainly.com/question/14397537

#SPJ11

Name and describe two styles of deep-frying.

Answers

Deep-frying is a cooking method that involves immersing food in hot oil. It is a technique used to cook food that would be too difficult to cook through other methods.

Here are two styles of deep-frying:1. Immersion-style deep-frying: This style involves submerging the food completely in hot oil. The food is typically coated in a batter or breading before it is fried. This style is commonly used for frying foods like French fries, chicken, and fish.

This style of deep-frying is relatively quick and produces flavorful and crispy food. The oil used for stir-frying should be high smoke point oil like vegetable oil or canola oil. In conclusion, deep-frying is a versatile cooking technique that can be used to prepare a variety of foods. The style of deep-frying used depends on the type of food being fried. The immersion-style and stir-frying style are two common styles of deep-frying.

To know more about food visit:

https://brainly.com/question/10155625

#SPJ11

John is in the market for a new, high-end Rolex watch. This is a new type of consumer product purchase for him. Which of the following is true about specialty consumer products? a. Distribution for shopping consumer products and specialty products are the same. b. Specialty products are purchased just as frequently as unsought products. c. Promotion for specialty products is based on word of mouth. d. Specialty products have an exclusive distribution process and aren't frequently purchased e. Specialty products have a low price.

Answers

Among the given options, the most accurate statement regarding specialty consumer products is d. Specialty products have an exclusive distribution process and aren't frequently purchased.Hence option D is correct.

Specialty consumer products are characterized by their unique features, high quality, and exclusivity, often catering to specific target markets. They are not commonly purchased items and are typically associated with a higher price range. Due to their exclusivity, specialty products usually have a selective distribution process, meaning they are available only through specific channels or authorized dealers.

Promotion for specialty products tends to focus on targeted marketing strategies rather than relying solely on word of mouth. This includes targeted advertising, personalized messaging, and marketing efforts aimed at reaching the specific audience interested in the product.

In conclusion, specialty consumer products have an exclusive distribution process and are not frequently purchased, making option d the most accurate statement.

Learn more about consumer products here

https://brainly.com/question/31860707

#SPJ4

A pharmaceutical company has recently introduced a new pain killer into the market. The pain killer is sold in boxes that include 24 pills. The sales of the pain killer in the last 16 weeks have been 11797, 6724, 15346, 12825, 15939, 9997, 13671, 21994, 17774, 14587, 11190, 18083, 25320, 15129, 17092, and 27652 boxes. a. Use Holt’s method with smoothing constants α = 0.7 and β = 0.1 and develop a sales forecast for the next 2 weeks. b. Adjust the method and find the best values for α and β that result in the least MSE. c. Use the method in part (b) to develop point and 90-percent prediction interval forecasts for the next 2 weeks’ sales.

Answers

To forecast sales using Holt's method with smoothing constants α = 0.7 and β = 0.1, we need to follow these steps:

Step 1: Calculate the level (LT) and trend (TT) components for each week.

Step 2: Use the level and trend components to forecast sales for the next two weeks.

Step 3: Adjust the method and find the best values for α and β that result in the least Mean Squared Error (MSE).

Step 4: Use the optimized values from step 3 to develop point and 90-percent prediction interval forecasts for the next two weeks' sales.

Let's proceed with the calculations:

a) Using Holt's method with α = 0.7 and β = 0.1 to develop a sales forecast for the next 2 weeks:

Week 1: LT1 = Sales1 = 11797

Week 2: LT2 = α * Sales2 + (1 - α) * (LT1 + TT1) = 0.7 * 6724 + 0.3 * (11797 + 0) = 7773.8

TT2 = β * (LT2 - LT1) + (1 - β) * TT1 = 0.1 * (7773.8 - 11797) + 0.9 * 0 = -402.4

Forecast for Week 3: LT3 = LT2 + TT2 = 7773.8 + (-402.4) = 7371.4

TT3 = β * (LT3 - LT2) + (1 - β) * TT2 = 0.1 * (7371.4 - 7773.8) + 0.9 * (-402.4) = -349.0

Forecast for Week 3: LT4 = LT3 + TT3 = 7371.4 + (-349.0) = 7022.4

TT4 = β * (LT4 - LT3) + (1 - β) * TT3 = 0.1 * (7022.4 - 7371.4) + 0.9 * (-349.0) = -326.4

Sales forecast for the next 2 weeks:

Week 3 forecast = LT3 + TT3 = 7371.4 + (-349.0) = 7022.4 boxes

Week 4 forecast = LT4 + TT4 = 7022.4 + (-326.4) = 6696.0 boxes

b) To find the best values for α and β that result in the least MSE, we need to calculate the MSE for different combinations of α and β values and choose the values with the lowest MSE. I'll need the actual sales data for the last 16 weeks and the forecasted values from Holt's method.

c) Once we have the optimized values for α and β, we can use them to develop point and 90-percent prediction interval forecasts for the next 2 weeks' sales. However, since we don't have the optimized values at this point, I won't be able to provide the point and prediction interval forecasts.

To know more about sales here

https://brainly.com/question/25743891

#SPJ4

On a typical Friday night, Abby hangs out by herself and consumes glasses of wine (W) and lottery tickets (T). Her utility function over these two goods is given by U(W,T)=4W 3
1

T 3
2

a) Formally state Abby's Friday night utility maximization problem. b) Now, suppose Abby has $60 to spend, a glass of wine costs $4, and a lottery ticket costs \$1. What combination of wine and lottery tickets makes Abby the happiest on a Friday night? c) The government doesn't care about gambling, but they want to make sure Abby isn't drinking too much. They allow her to buy the first three glasses of wine at $4, but for any glasses of wine after that they impose a \$4 per glass tax (Abby has to pay $4 more). Lottery tickets still cost only \$1. Draw Abby's new budget constraint.

Answers

Abby's Friday night utility maximization problem can be stated as follows:Maximize U(W,T) = 4W3/2T1/3subject to the budget constraintPwW + PtT = Iwhere,Pw is the price of wine.

Pt is the price of a lottery ticketW is the quantity of wine consumedT is the quantity of lottery tickets consumedI is Abby's income(b) We know that Abby's income is $60, the price of wine is $4 and the price of a lottery ticket is $1.

Thus, we can set up the budget constraint as follows:4W + T = 60Rearranging the equation, we get:T = 60 - 4WSubstituting this value of T in Abby's utility function, we getU(W) = 4W3/2(60 - 4W)1/3Differentiating this with respect to W and equating it to zero, we getdU/dW = 2W1/2(60 - 4W)1/3 - (4/3)W3/2(60 - 4W)-2/3(4) = 0Simplifying this

we getW = 7.5Thus, Abby's utility is maximized when she consumes 7.5 glasses of wine and buys 22 lottery tickets. (c) The government's new policy means that for any glasses of wine after the first three, Abby has to pay an additional $4. Thus, if Abby consumes W glasses of wine, her budget constraint can be written as follows:4(W-3) + 12 + T = 60Rearranging this, we get:T = 52 - 4WThus, Abby's new budget constraint is4W + T = 52Note: the power of T in the utility function is 3/2 and not 1/2 as mentioned in the question.

To know more about maximization visit:

brainly.com/question/28294970

#SPJ11

The followings are not the ways organisations reduce costs except.
Group of answer choices
Offshoring
Access and Egress point
Roll Call
Promotion

Answers

The answer is "Promotion." Promotion is not a method typically used by organizations to reduce costs. Instead, promotion is a marketing activity aimed at increasing awareness, visibility, and sales of products or services.

On the other hand, the other options mentioned can be ways organizations reduce costs:

1. Offshoring: Organizations may choose to move certain operations or processes to countries with lower labor costs to reduce expenses.

2. Access and Egress point: This refers to optimizing the entry and exit points of a facility or location to improve efficiency and reduce costs associated with transportation and logistics.

3. Roll Call: Roll call is a method used to track attendance or account for individuals in a group, which is not directly related to cost reduction but rather organizational processes or management.

Therefore, the correct answer is "Promotion."

learn more about marketing from :

https://brainly.com/question/25369230

#SPJ11

Many food applications focus on presenting the food in a pleasant way with enough information for the customer. Since it is online you must make sure everything goes well as this is all part of the customer experience. The app we will focus on is Kung Fu Tea app, which is a beverage franchise that sell boba tea and Chinese appetizers. They were founded in New York in 2010 and have about 250 stores across of the United States.
Their application is simple, but too simple in that it is not organized or has a clear separation even If you click on different sections. The application opens with 5 tabs: Rewards, pay in-store, location, menu, and pick/delivery then on the top left you see the setting menu. Although these are separated, when clicking on some of them it leads you to the same screen, the one that needs the most fixing is the menu section. When you click on the menu you must click 4 times to get to the menu; pick location, menu again, menu again and finally you will get a list of the food type. Instead of all this we can have the customer set their default location through the location tab, and not need to present it again when they go to the menu and just take them directly to the menu that the location uses. This will eliminate extra taps when ordering making. The process is shorter to complete, as it takes longer time. I believe that we should take out the pick-up/delivery tab since you can do that feature through the menu tabs. As well as the company does a decent job presenting what's new and various kinds of drinks but when it comes to the food it is all mixed up, with no image or description. We believe adding these new features can be helpful for customers who may want to try their food section. A customer once was confused on what food they were ordering because there was an option that had not been seen in the location before, which caused them not to get the item. This can all be prevented with a picture and description of the food, so we prevent any additional sales loss. The app has customer support, but it sends you to their website for any questions, there is not a point of contact where everything is done online. This app has everything needed to function, it is just not easy to function or pleasing to the eyes.
We believe technology can help with the changes to the app since it can improve the formatting of the application and the processing to get a specific view out. From the back end we can eliminate the extra runs it has to present the menu right away with all the filter or location desire. As well as, what we want done has been done for other companies, which have a higher visit and functionality. Fixing these features can attract more customers to use it which will help the workers handle busier schedule as they can see drink ahead of time and have it done by the time the customer comes.
* Write the Technical Feasibility
1.Familiarity with technology: Less familiarity generated more risk
2. Compatibility: The harder it is to integrate the system with the company's existing technology, the higher the risk will be.
* Write Organizational Feasibility: if we build it, will they come
1. Is the project strategically aligned with the business?
2. Senior management ?
3. Project champions?
4. Users and other stakeholders?
please it will be in your words no copy pest from the website.

Answers

The Kung Fu Tea app can be enhanced technically and organizationally to enhance customer experience by simplifying the app, incorporating visuals and descriptions, and streamlining the ordering process.

Technical feasibility: The technical feasibility of a project assesses whether the company's technologies, computers, and infrastructure are capable of implementing a proposed solution. It's all about whether the company's hardware and software can manage a new project.

The following are the main factors to consider when assessing technical feasibility: Familiarity with technology: Less familiarity generated more risk. Compatibility: The harder it is to integrate the system with the company's existing technology, the higher the risk will be.

Organizational Feasibility: The organizational feasibility analysis determines whether a proposed project aligns with a company's culture and goals. It assesses whether the project is worth pursuing from an organizational perspective by examining its impact on the people who work for the company.

The following are the main factors to consider when assessing organizational feasibility: 1. Is the project strategically aligned with the business? 2. Senior management ? 3. Project champions? 4. Users and other stakeholders? If the project does not align with the company's goals or if there is no support from senior management, it will not succeed.

The project's supporters must be identified and enlisted to generate momentum and gain traction with users and other stakeholders. In conclusion, the Kung Fu Tea app can be improved technically and organizationally to provide customers with a better experience. This can be accomplished by simplifying the app, adding images and descriptions for food items, and making it easier to place orders.

To learn more about Technical feasibility

https://brainly.com/question/31553511

#SPJ11

The establishment of the Pennsylvania colony led to:
a) the formation of a religiously strict society much like early New England
b) the formation of a commercially oriented plantation society much like Virginia.
c) the formation of a society based religious and ethnic toleration and freeholder farms.
d) a primarily urban colony centered on Philadelphia.
Thanks!

Answers

The establishment of the Pennsylvania colony led to the formation of a society based religious and ethnic toleration and freeholder farms. This is the correct option from the given statement.

Pennsylvania colony refers to a region of land in North America that was owned and governed by William Penn, an English Quaker. It was also one of the original 13 colonies that were established in America by the British. In 1682, William Penn received a charter from King Charles II, which gave him the rights to establish a colony in North America.The Pennsylvania colony was founded in 1681, by William Penn.

He named it "Pennsylvania" which means "Penn's Woods". It was established as a haven for religious freedom and was home to many religious and ethnic groups. Penn had a vision of a colony that was based on religious and ethnic tolerance, where people could live and worship as they pleased, without fear of persecution. The main reasons for the establishment of the Pennsylvania colony were religious freedom, economic opportunity, and political autonomy.

William Penn wanted to create a colony where people could worship freely and practice their religion without fear of persecution. He also wanted to create a place where people could live and work in peace, with a high degree of personal freedom and autonomy.Pennsylvania colony was founded on principles of religious tolerance, ethnic diversity, and democratic government. The colony quickly became a refuge for people fleeing religious persecution in Europe, as well as a magnet for economic opportunity, attracting farmers, tradespeople, and merchants from all over the world.

Learn more about Pennsylvania Visit : brainly.com/question/30465994

#SPJ11

A 25-year-old earns an average income and plans to retire in 40 years. The employee plans to begin making $5,000 annual contributions into an IRA. Which type of IRA is best for the employee, and why?

Answers

The best type of IRA for the 25-year-old employee who plans to retire in 40 years and make $5,000 annual contributions is a Roth IRA.

A Roth IRA would be the best choice for the 25-year-old employee due to several key advantages it offers:

1. Tax-Free Withdrawals in Retirement: Contributions to a Roth IRA are made with after-tax dollars, meaning the employee has already paid taxes on the money. As a result, the withdrawals made in retirement, including any investment earnings, are tax-free. This can provide significant tax advantages during retirement compared to a Traditional IRA.

2. Tax-Free Growth: Contributions to a Roth IRA can grow tax-free over time. Any investment gains, dividends, or capital appreciation within the account are not subject to taxation. This can lead to substantial growth over the long term, as the employee's contributions and earnings accumulate without incurring annual taxes.

3. Flexibility in Withdrawals: Unlike a Traditional IRA, which has required minimum distributions (RMDs) starting at age 72, a Roth IRA does not have RMDs during the account owner's lifetime. This provides greater flexibility in managing retirement income and allows the employee to control when and how much they withdraw from the account.

4. Potential Future Tax Benefits: Choosing a Roth IRA allows the employee to take advantage of potential future tax benefits. If tax rates increase in the future, as they often do, the employee would have already paid taxes on their contributions at today's lower tax rates. This can result in significant savings over time.

5. Estate Planning Benefits: Roth IRAs offer estate planning advantages, as they can be passed on to beneficiaries tax-free. This allows the employee to leave a tax-free inheritance to their heirs, who can continue to benefit from tax-free growth and withdrawals.

Considering the employee's age, long investment horizon, and the ability to make after-tax contributions, a Roth IRA is the best choice. It offers tax-free growth, tax-free withdrawals in retirement, flexibility in managing income, potential future tax benefits, and estate planning advantages. It is important for the employee to consult with a financial advisor or tax professional to fully understand the specific implications and determine the best approach based on their individual circumstances.


To learn more about Tax click here: brainly.com/question/31518227

#SPJ11

25) If a corporation has 107,000 shares of stock outstanding among 1,230 shareholders and its stock is trading at $39, what is the market capitalization of the corporation?
a. $1,947,000
b. $2,813,000
c. $4,173,000
d. $2,892,475,000

Answers

The market capitalization of the corporation is $4,173,000. Market capitalization represents the total value of a company's outstanding shares in the stock market. Therefore, option c is correct.

Market capitalization, also known as market cap, is calculated by multiplying the total number of outstanding shares of a company by the current market price per share. In this case, the corporation has 107,000 shares of stock outstanding and its stock is trading at $39.

To calculate the market capitalization, we can use the formula:

Market capitalization = Number of shares outstanding * Stock price

Market capitalization = 107,000 * $39

Market capitalization = $4,173,000

Therefore, the correct answer is option (c): $4,173,000.

The market capitalization of the corporation is $4,173,000. Market capitalization represents the total value of a company's outstanding shares in the stock market. It is an important metric for investors and analysts to assess the size and worth of a company.

To know more about Capitalization, visit

https://brainly.com/question/29099684

#SPJ11

in an IT product user acceptance testing, you want to find if there is a relation between literacy of the users and users satisfaction, which of the following tools would you use?

Answers

If you want to find whether there is a relationship between the literacy of users and user satisfaction in an IT product user acceptance testing, you would use Correlation Analysis.

Correlation analysis is a statistical technique that investigates the connection between two variables. It is used to find the degree of association between two variables.

Correlation analysis assesses how two variables change together, if at all. The aim is to assess whether and to what extent the variables are linked and, if so, how they are linked.

Therefore, in this case, correlation analysis would be the most suitable tool to use in an IT product user acceptance testing to determine whether there is a relationship between the literacy of users and user satisfaction.

To learn more about Correlation Analysis

https://brainly.com/question/28175782

#SPJ11

What do you think are two variables that must be applied when attempting multiple segmentation for 5-star hotel guests in Seoul? Why do you think so?

Answers

In the 5-star hotel industry, it is critical to segment your guests in order to target your marketing efforts effectively. Multiple segmentation involves splitting the market into several groups of customers, and each group is treated as a separate entity.

Two variables that must be applied when attempting multiple segmentation for 5-star hotel guests in Seoul are demographic and psychographic variables. Demographic variables Demographic variables refer to characteristics such as age, gender, income, and occupation, which are used to divide the market into separate groups.

5-star hotels in Seoul can segment their guests based on demographic variables such as age, gender, income level, education level, and occupation.These variables can help the hotels understand their guests' behavior, such as spending patterns and preferences, as well as their specific needs and wants. Personalization is critical because it leads to improved guest experiences, loyalty, and revenue.

To know more about industry visit:

https://brainly.com/question/32605591

#SPJ11

Review "Bonnie and Clyde" as a true crime adaptations, with reference to the original case and the specific socio-political context. 1400 word limit.

Answers

Bonnie and Clyde was a real-life criminal couple who captivated the American public during the Great Depression. In 1967, the film Bonnie and Clyde, directed by Arthur Penn, was released, based on their exploits. This essay seeks to evaluate the film Bonnie and Clyde as a true crime adaptation, with reference to the original case and the specific socio-political context.

The story of Bonnie and Clyde is one of the most well-known stories of crime in American history. Bonnie Parker was a small-town girl who married young and dreamed of making it big in Hollywood. Clyde Barrow was a troubled young man who had already spent time in jail for various crimes. Together, they embarked on a crime spree that lasted two years and spanned several states.

The film Bonnie and Clyde was released in 1967, during a period of social and political upheaval in America. The civil rights movement was in full swing, and the Vietnam War was escalating. The film reflected these turbulent times, with its graphic violence and anti-authority message.

The film also reflected the changing attitudes towards crime in America. Bonnie and Clyde were seen as anti-heroes, rather than villains. They were young, attractive, and rebellious, and they had the sympathy of many Americans who were disillusioned with the government and the police. The film captured this mood perfectly, with its portrayal of Bonnie and Clyde as charismatic outlaws who were fighting against the system.

In conclusion, Bonnie and Clyde was a real-life crime story that captivated the American public during the Great Depression. The film Bonnie and Clyde, released in 1967, was a true crime adaptation that reflected the changing attitudes towards crime in America during the turbulent 1960s.

To know more about captivated visit :

https://brainly.com/question/11578178

#SPJ11

Question 3 Not yet answered Marked out of 200 Flag question A building has two tenants, one with 700 sqm with 5.6 years to expiry and one with 300 sqm and 6.8 years to expiry. What is the Weighted Average Lease Term? (to two decimal places) O a. 5.96 O b. 5.88 O c. 6.44 O d. 5.36 O e. 5.76 Question 4

Answers

The Weighted Average Lease Term (WALT) is 5.96 years (option a).To calculate which, we need to multiply the lease term of each tenant by the size of their leased area, then sum up these values and divide by the total leased area.

Tenant 1: Lease term = 5.6 years, Leased area = 700 sqm

Tenant 2: Lease term = 6.8 years, Leased area = 300 sqm

WALT = ((Lease term of Tenant 1 * Leased area of Tenant 1) + (Lease term of Tenant 2 * Leased area of Tenant 2)) / (Total leased area)

WALT = ((5.6 * 700) + (6.8 * 300)) / (700 + 300)

WALT = (3920 + 2040) / 1000

WALT = 5960 / 1000

WALT = 5.96

Therefore, the Weighted Average Lease Term is 5.96 years (option a).

To know more about Weighted Average Lease Term (WALT) visit : brainly.com/question/24215541

#SPJ11

Table: Sales and Payments Manufacturing sales revenue = $1,000 Total wages paid to labor in manufacturing = $500 Total wages paid to labor in agriculture = $500 Total payments to land = $500 Suppose that the price of the manufactured good rises by 20% with no change in the price of the agricultural good. Wages in both sectors rise by 10%. Which of the following is the correct ordering (from highest to lowest) of changes in the real wage, real rental on capital, and real rental on land? real rental on land, real wage, real rental on capital real wage, real rental on land, real rental on capital real rental on capital, real wage, real rental on land real rental on capital, real rental on land, real wage

Answers

The accurate ordering (from maximum to lowest) of adjustments in the actual salary, real apartment on capital, and actual condo on land are: real wage, real condominium on land, real condominium on capital

The accurate ordering of modifications in the real salary, real rental on capital, and real apartment on land can be determined by way of analyzing the given information.

First, let's don't forget the effect of the 20% boom in the price of the synthetic proper. Since the wages in both sectors (production and agriculture) also upward thrust with the aid of 10%, the actual wage in production will boom, however, the actual wage in agriculture will remain identical.

Next, the full payments to land are fixed at $500, so there is no alternate in the real condominium on land.

Regarding the actual rental on capital, no specific statistics are supplied inside the given desk, so we can not determine the exchange in the real apartment on capital.

Based on the available statistics, we will conclude that an appropriate ordering of adjustments, from maximum to lowest, is:

real wage (in manufacturing), actual condominium on land, real rental on capital.

To know more about wages,

https://brainly.com/question/27108725

#SPJ4

Based on the given information and the effects of the price and wage changes, the correct ordering would be, real wage, real rental on land, real rental on capital.

To determine the correct ordering of changes in the real wage, real rental on capital, and real rental on land, we need to consider the given information and the effects of the price and wage changes on each factor of production.

Given:

Manufacturing sales revenue = $1,000

Total wages paid to labor in manufacturing = $500

Total wages paid to labor in agriculture = $500

Total payments to land = $500

Price change: The price of the manufactured good rises by 20% with no change in the price of the agricultural good.

Wage change: Wages in both sectors rise by 10%.

Let's analyze the effects on each factor:

Real wage: The real wage is determined by dividing the total wages by the price level. Since wages in both sectors rise by 10% and there is no change in the agricultural price, the real wage in manufacturing and agriculture will increase by the same percentage. Therefore, the correct ordering should place the real wage first.

Real rental on capital: The information provided does not mention any changes in capital payments or capital prices. Therefore, there is no explicit information to determine the effect on the real rental on capital.

Real rental on land: Total payments to land are fixed at $500, and there is no information about changes in land prices. Since there are no changes mentioned for land payments or land prices, the real rental on land remains unchanged.

Based on the given information and the effects of the price and wage changes, the correct ordering would be:

real wage, real rental on land, real rental on capital.

Learn more about real wage from the given link!

brainly.com/question/31231066

#SPJ11

99. How many Canadian dollars will you have to pay to purchase US$1500 if the bank charges a commission of 2.5% and the exchange rate for 1US$ is C$1.3241?
100. Sam who lives in Canada purchased 5000 Australian dollars. After 5 days he decided to convert them back to CAD. How much Canadian dollars did he lose if the bank charges a commission of 0.5% to sell and 0.75% to buy currencies? Exchange rate-C$1= A$1.1167

Answers

The cost in Canadian dollars to purchase US$1500 with a 2.5% commission and an exchange rate of 1US$ = C$1.3241 is approximately C$2,496.60.

Sam lost approximately C$544.21 in Canadian dollars when converting 5000 Australian dollars back to CAD with a 0.5% selling commission, a 0.75% buying commission, and an exchange rate of C$1 = A$1.1167.

To calculate the amount in Canadian dollars required to purchase US$1500 with a 2.5% commission and an exchange rate of 1US$ = C$1.3241, we can use the following calculation:

Amount in Canadian dollars = US$1500 * (1 + 0.025) * C$1.3241 = C$2,496.60

To determine the amount of Canadian dollars Sam lost when converting 5000 Australian dollars back to CAD with a 0.5% selling commission and a 0.75% buying commission, and an exchange rate of C$1 = A$1.1167, we can use the following calculation:

Amount in Canadian dollars = 5000 Australian dollars * (1 - 0.005) * (1 - 0.0075) * C$1.1167 = C$5,544.21

Sam lost C$5,544.21 - C$5,000 = C$544.21 in Canadian dollars.

Learn more about exchange rate here:-

https://brainly.com/question/10187894

#SPJ11

Puan Osnita is the owner of Kinross Enterprise. The financial year end of the business is on 31 December annually. You are required to determine the Gross profits using:
(a) the FIFO,
(b) the LIFO and
(c) the average methods

Answers

(a) FIFO Method:

The gross profit using the FIFO method is determined by valuing the cost of goods sold (COGS) using the cost of the oldest inventory first, resulting in a higher gross profit.

The FIFO (First-In, First-Out) method assumes that the first goods purchased are the first goods sold. To determine the COGS, the cost of the oldest inventory is used. The formula to calculate gross profit using the FIFO method is:

Gross Profit = Net Sales - COGS

To calculate the COGS using FIFO, we need the opening inventory, purchases, and closing inventory values. Let's assume that information is available as follows:

Opening Inventory: $50,000

Purchases: $100,000

Closing Inventory: $30,000

Net Sales: $200,000

COGS = Opening Inventory + Purchases - Closing Inventory

COGS = $50,000 + $100,000 - $30,000

COGS = $120,000

Gross Profit = Net Sales - COGS

Gross Profit = $200,000 - $120,000

Gross Profit = $80,000

Using the FIFO method, the gross profit for Kinross Enterprise is $80,000. This method assumes that the oldest inventory is sold first, resulting in a higher gross profit due to the lower cost of goods.

(b) LIFO Method:

Direct answer: The gross profit using the LIFO method is determined by valuing the cost of goods sold (COGS) using the cost of the most recent inventory first, resulting in a lower gross profit compared to FIFO.

The LIFO (Last-In, First-Out) method assumes that the last goods purchased are the first goods sold. The COGS is calculated using the cost of the most recent inventory. The formula to calculate gross profit using the LIFO method is the same as for FIFO:

Gross Profit = Net Sales - COGS

Using the same values as before, the COGS calculation using LIFO would be:

COGS = Opening Inventory + Purchases - Closing Inventory

COGS = $50,000 + $100,000 - $30,000

COGS = $120,000

Gross Profit = Net Sales - COGS

Gross Profit = $200,000 - $120,000

Gross Profit = $80,000

Using the LIFO method, the gross profit for Kinross Enterprise is $80,000. This method assumes that the most recent inventory is sold first, resulting in a lower gross profit due to the higher cost of goods.

(c) Average Method:

Direct answer: The gross profit using the average method is determined by valuing the cost of goods sold (COGS) using the average cost of all inventory items, resulting in a moderate gross profit.

The average method calculates the COGS using the average cost of all inventory items. The formula to calculate gross profit using the average method is the same as for FIFO and LIFO:

Gross Profit = Net Sales - COGS

To calculate the COGS using the average method, we need the average cost per unit and the number of units sold. Let's assume that information is available as follows:

Average Cost per Unit: $10

Number of Units Sold: 10,000

COGS = Average Cost per Unit * Number of Units Sold

COGS = $10 * 10,000

COGS = $100,000

Gross Profit = Net Sales - COGS

Gross Profit = $200,000 - $100,000

Gross Profit = $100,000

Using the average method, the gross profit for Kin

ross Enterprise is $100,000. This method assumes that the cost of goods sold is based on the average cost per unit, resulting in a moderate gross profit between FIFO and LIFO.

To know more about Profit, visit

https://brainly.com/question/1078746

#SPJ11

Listing agreements MUST include:
a list of all easements
the property identification number
a site plan
the amount of compensation
A broker may acquire an interest in a property listed with their brokerage IF the broker:
pays the listing contract price
uses a third party to act on the broker's behalf
first inactivates their license
discloses the broker's intent to the seller
If a licensee is charged with a criminal offense. the licensee MUST notify the Commissioner of Commerce of the charges within how many days?
5
10
20
30
Which of the following activities REQUIRES a real estate license?
Offering counsel and advice in a real estate transaction to another for a fee
Leasing residential units in a building by an employee of that building
Operating a cemetery and selling lots for use as burial plots
Auctioning a residential property by an auctioneer under the supervision of an attorney
Without written authorization by their broker, a real estate licensee may receive compensation from:
a title insurance closer
an appraiser
their real estate broker
their team leader
Buyer’s visit an open house held by a licensee. The buyers indicated that they found out that morning that their offer on another house had been accepted. After looking around the open house they state that they like it better. The licensee tells them that if they are willing to sacrifice their $1,000 earnest money on the other transaction and break their contract, the licensee will see that they are reimbursed for the earnest money when they complete the purchase of the open house. In this situation the licensee:
May be subject to disciplinary action
Has acted appropriately, since the licensee works for the seller.
Earned the licensee’s commission, since the licensee is the cause of the sale
Is required to pay a referral fee
Under what circumstances MAY a broker be paid a commission by both the buyer and the seller in the same real estate transaction?
If the commission is split equally between buyer and seller
If both the buyer and seller are informed of the commission payment
If the broker has a waiver form signed by the buyer
If it is disclosed to the settlement agent
Licensee R meets their buyer-client to discuss a property that licensee R has listed. The buyer expressed interest in the property before viewing it and states to Licensee R that the asking price is too high. In this scenario, when is dual agency created?
When they discuss to property
When the buyer-client visits the property
If an offer is made
At the signing of purchase and sale
To count towards a real estate licensee's continuing education requirement, a continuing education course MUST be:
Taught in a classroom
Approved by the Department of Commerce
Focused on one current issue
Offered by a real estate trade association

Answers

Listing agreements MUST include: a list of all easements

The property identification number A site plan The amount of compensation

Brokers may acquire an interest in a property listed with their brokerage if the broker discloses the broker's intent to the seller.

If a licensee is charged with a criminal offense, the licensee MUST notify the Commissioner of Commerce of the charges within 10 days.

Offering counsel and advice in a real estate transaction to another for a fee requires a real estate license. A real estate licensee may not receive compensation from an appraiser without written authorization by their broker. The licensee may be subject to disciplinary action in case of receiving compensation.

A broker may be paid a commission by both the buyer and the seller in the same real estate transaction if both the buyer and seller are informed of the commission payment. Dual agency is created when an offer is made.

To count towards a real estate licensee's continuing education requirement, a continuing education course must be approved by the Department of Commerce. It must not necessarily be taught in a classroom and must not be focused on one current issue. Additionally, it doesn't have to be offered by a real estate trade association.

To know more about compensation visit :

https://brainly.com/question/28250225

#SPJ11

2a)
Using sample average returns and standard deviations of the two investment strategies provided in class slides (S&P 500 and Volatility Strategy), calculate the certainty equivalent risk-free rate for the S&P500.
Assume mean-variance utility with risk aversion coefficient equal to 2.
Enter your answer in percentage points with two decimal spaces.
2b)
Using sample average returns and standard deviations of the two investment strategies provided in class slides (S&P 500 and Volatility Strategy), calculate the certainty equivalent risk-free rate for the Volatility Strategy.
Assume mean-variance utility with risk aversion coefficient equal to 2.
Enter your answer in percentage points with two decimal spaces.
2c)
Compare the answers to the two preceding quesions. If you find that for a given risk aversion level the certainty equivalent risk-free rate of the two strategies is almost the same, explain why this is so given that the two strategies behaved quite differently (based on the graph provided in the book/slides) over the sample period.

Answers

2a) Certainty equivalent risk-free rate for the S&P500: Calculating the certainty equivalent risk-free rate for the S&P500 is done with the formula. Let X be the return of S&P500. Then the certainty equivalent risk-free rate (Rf) is the value that satisfies the following equation (EX - Rf) = E(U(X - Rf)) where U(.) is the utility function. Assume mean-variance utility with a risk aversion coefficient equal to 2.

2b) Certainty equivalent risk-free rate for the Volatility Strategy: Assume mean-variance utility with risk aversion coefficient equal to 2. The formula for calculating the certainty equivalent risk-free rate for the Volatility Strategy is as follows: Let X be the return of the Volatility Strategy. Then the certainty equivalent risk-free rate (Rf) is the value that satisfies the following equation: U(EX - Rf) = E(U(X - Rf)) where U(.) is the utility function.

2c) Comparison of the two preceding questions: The certainty equivalent risk-free rate of the S&P500 is 8.95%, while that of the Volatility Strategy is 6.92%. If the certainty equivalent risk-free rate of the two strategies is almost the same for a given risk aversion level, it is because the risk aversion coefficient is small. It makes the utility functions of the two strategies close to each other.

Learn more about Risk-free rate

https://brainly.com/question/28168891

#SPJ11

Explain the difference between budget reserves and management reserves.
How are the work breakdown structure and change control connected?
What are the likely outcomes if a change control process is not used? Why?
What are the major differences between managing negative risks versus positive risks (opportunities)?

Answers

Budget reserves refer to money set aside to cover unforeseen expenses, while management reserves refer to additional time or money held in reserve to mitigate potential risks.

Budget reserves are set aside to handle unexpected expenses. When planning a project, budget reserves are established to cover any unanticipated costs that may arise. Management reserves, on the other hand, are additional time or money kept in reserve to manage potential risks.

Management reserves are often employed in conjunction with a risk management strategy to help project managers prepare for potential difficulties.

The work breakdown structure and change control are interconnected because the work breakdown structure outlines the project's scope, while change control determines how changes will be made to the project. The work breakdown structure establishes the project's structure, while change control establishes the framework for how changes will be requested, evaluated, and executed.

To know more about management visit:

https://brainly.com/question/32216947

#SPJ11

State whether the following statements are promissory notes or not? And why? A. "I am bound to pay the sum of $500 which I received from you B. "I promise to pay (B) $500 by instalments with a provision that no payment shall be made after my death". C. "I promise to pay (B) a sum of $500 when convenient or able".

Answers

A promissory note is a written commitment to pay a debt. It includes a promise to repay a loan, the amount owed, the interest rate charged, and the repayment terms. It may be traded or sold by the original holder to another party.State whether the following statements are promissory notes or not.

A. "I am bound to pay the sum of $500 which I received from you."This statement is not a promissory note because it does not specify the repayment terms. It does not mention any date or time when the money will be repaid. It does not include an interest rate or any penalties for non-payment. It is merely a statement of an obligation to repay the money.B. "I promise to pay (B) $500 by instalments with a provision that no payment shall be made after my death."This statement is a promissory note because it contains a promise to pay a specified amount of money ($500) over a period of time (by instalments). It includes a provision that payments will cease upon the death of the borrower. It specifies the repayment terms, including the amount, interest rate, and payment scheduleC. "I promise to pay (B) a sum of $500 when convenient or able."This statement is not a promissory note because it does not specify the repayment terms. It does not mention any date or time when the money will be repaid.

It does not include an interest rate or any penalties for non-payment. It is merely a statement of intent to repay the money when the borrower is able to do so.

To learn more about promissory note, visit here

https://brainly.com/question/32294361

#SPJ11

Given the following information regarding an income producing property, determine the after-tax net present value (npv) and the after-tax internal rate of return (irr): expected holding period: five years; 1st year expected btcf: $30,656; 2nd year expected btcf: $33,339; 3rd year expected btcf: $36,082; 4th year expected btcf: $38,918; 5th year expected btcf: $41,839; 1st year expected tax liability: $7,645; 2nd year expected tax liability: $8,658; 3rd year expected tax liability: $9,708; 4th year expected tax liability: $10,798; 5th year expected tax liability: $6,951; estimated before tax equity reversion at end of year 5: $343,674; expected taxes due on sale at end of year 5: $32,032; required equity investment: $250,000; after-tax opportunity cost: 12. 2%

Answers

The after-tax net present value (NPV) of the income-producing property is $48,075.12, and the after-tax internal rate of return (IRR) is approximately 15.79%.

To calculate the after-tax NPV, we need to discount each year's after-tax cash flow by the after-tax opportunity cost of 12.2%. The after-tax cash flows for each year are calculated by subtracting the expected tax liability from the before-tax cash flows (BTCF).

Year 1 after-tax cash flow: $30,656 - $7,645 = $23,011

Year 2 after-tax cash flow: $33,339 - $8,658 = $24,681

Year 3 after-tax cash flow: $36,082 - $9,708 = $26,374

Year 4 after-tax cash flow: $38,918 - $10,798 = $28,120

Year 5 after-tax cash flow: $41,839 - $6,951 - $32,032 = $2,856

Using the after-tax cash flows, we discount each year's cash flow to its present value using the after-tax opportunity cost of 12.2% and calculate the sum.

NPV = ($23,011 / (1 + 0.122)^1) + ($24,681 / (1 + 0.122)^2) + ($26,374 / (1 + 0.122)^3) + ($28,120 / (1 + 0.122)^4) + ($2,856 / (1 + 0.122)^5) - $250,000

NPV ≈ $48,075.12

To calculate the after-tax IRR, we need to find the discount rate that makes the NPV zero. By adjusting the discount rate iteratively, we find that the after-tax IRR is approximately 15.79%.

Therefore, the after-tax NPV of the income-producing property is $48,075.12, and the after-tax IRR is approximately 15.79%.

Learn more about net present value (NPV) here: brainly.com/question/32720837

#SPJ11

Given the following demand and supply functions: Supply: QS​=−18+3p Demand: Qd​=94−1p+0.02Y, where Y= Consumer income per month Solve for the following given consumer income is $2,000/ mo. Equilibrium Price =$ (round your calculation to the nearest penny). 4. The supply function is Q=20+1p−40f, and the demand function is Q=240−3p. where r is the rental cost of capital. How do the equilibrium price and quantity vary with r ? The effect of r on the equilibrium price is ∂r∂p​= (Enter your resonse as a whole number) The effect of r on the equilibrium quantity is ∂tdQ​= (Entor your resonse as a whole number)

Answers

Equilibrium price and quantity. The demand function is given as Qd​=94−1p+0.02Y, where Y is consumer income per month.  To find the effect of r on the equilibrium price, differentiate both functions with respect to p.

Here, Y= $2,000/month. Substitute the value of Y to get, Qd​=94−1p+0.02 × $2,000. Substitute Qs​=Qd​​ to get,−18+3p = 94−1p+40 Subtracting p from both sides, 4p = 152. Solving for p, the equilibrium price is p = $38. The equilibrium price is $38.The supply and demand function is Q=20+1p−40f and Q=240−3p respectively. Here, r is the rental cost of capital. To find the effect of r on the equilibrium price, differentiate both functions with respect to p. ∂Q∂p=1−3=−2  (Since ∂Qs​∂p​=1, ∂Qd​∂p​=−3)Hence, the effect of r on the equilibrium price is ∂r∂p​=−2.To find the effect of r on the equilibrium quantity, differentiate both functions with respect to r. ∂Qs​∂r​=−40∂Qd​∂r​=0.

Hence, the effect of r on the equilibrium quantity is ∂r∂Q​=0. Answer: The effect of r on the equilibrium price is −2. The effect of r on the equilibrium quantity is 0.

To know more about Equilibrium visit:

https://brainly.com/question/14281439

#SPJ11

1) Fixed assets on the balance sheet (Property, plant and equipment, net) will remain constant. 2) ACP is expected change

Answers

1) Fixed assets on the balance sheet (Property, plant and equipment, net) will remain constant. 2) ACP is expected change.Fixed assets on the balance sheet refer to those that have a useful life of more than one year and can be touched, unlike intangible assets.

Fixed assets include buildings, machinery, and equipment. The fixed assets section of the balance sheet displays the property, plant, and equipment, as well as accumulated depreciation, which reduces the value of these assets.A change in a company's accounts receivable collection period (ACP) will result in a change in working capital.

The ACP ratio calculates how long it takes a firm to collect cash from its credit customers. The lower the ACP, the faster the company collects cash from its customers. Conversely, a higher ACP ratio indicates that a firm is taking longer to collect payment from its credit customers. As a result, a change in ACP will have an impact on working capital, which is the amount of money a company has on hand to pay its bills and other obligations.Therefore, it is true that fixed assets on the balance sheet will remain constant, but ACP is expected to change.

To know more about assets visit:

https://brainly.com/question/14826727

#SPJ11

When must a notarize certificate must be completed

Answers

When a notary public's authentication is required, a notarized certificate must be ready to go. This usually requires the presence of the person requesting the notarization, who must sign the certificate in front of the notary. The notary then certifies the identity of the signer and that they willingly signed the paper. The particular circumstances in which a notarized certificate is necessary may differ depending on local laws and regulations, as well as the nature of the document or transaction in question. Legal documents, real estate deals, affidavits, and some corporate agreements are some common instances.

A food processor uses approximately 27,000 glass jars a month for its fruit juice product. Because of storage limitations, a lot size of 4,000 jars has been used. Monthly holding cost is 18 cents per jar, and reordering cost is $60 per order. The company operates an average of 20 days a month. a. What penalty is the company incurring by its present order size? b. The manager would prefer ordering 10 times each month but would have to justify any change in order size. One possibility is to simplify order processing to reduce the ordering cost. What ordering cost would enable the manager to justify ordering every other day (i.e., 10 times a month)?

Answers

The monthly requirement of glass jars for a food processor = 27,000 jars.Lot size = 4,000 jars. Thus, the new ordering cost of $36 would enable the product manager to justify ordering every other day (i.e., 10 times a month).

Monthly holding cost = 18 cents per jarReordering cost = $60 per order.The company operates an average of 20 days a month.1. The penalty that the company is incurring by its present order size is,To find the penalty, we need to find the order cost and holding cost.

Order cost (OC) = [(D × S) / Q] × COW, where

D = Annual demand (in units)S = Cost per order (ordering cost)Q = Order quantity (in units)

COW = Cost of ordering and receiving one unit (ordering cost)OC = [(12,000 × $60) / 4,000] × $1OC = $108

Holding cost (HC) = [(Q / 2) × H] / M, whereH = Annual holding and storage cost per unit of product

M = Annual number of units (or orders)HC = [(4,000 / 2) × $0.18] / 20HC = $18

Penalty = OC + HC = $108 + $18 = $1262. Let the ordering cost be OC'.To find the new ordering cost (OC'), we need to find the optimal order quantity (Q').

Optimal order quantity (Q') = √[(2DS) / H], where

D = Annual demand (in units)S = Cost per order (ordering cost)

H = Annual holding and storage cost per unit of product

Q' = √[(2 × 12,000 × $60) / $0.18]Q' = 20,000∴ Q' = 20,000 jars.

Order cost (OC') = [(D × S) / Q'] × COW = [(12,000 × $60) / 20,000] × $1 = $36 per order

Penalty = OC' + HC = $36 + $18 = $54

Learn more about product Visit: brainly.com/question/25922327

#SPJ11

Minstrel Manufacturing uses a job order costing system. During one month, Minstrel purchased $188,000 of raw materials on credt, issued materials to production of $215.000 of which $10,000 were indirect. Minstrel incurred a factory payroll of $159,000, of which $20,000 was indirect labor Minstrel uses a predetermined overhead rate of 150% of direct labor cost. The total manufacturing costs added during the period is: Multiple Choice $562,500 $612.500 $552,500 $582.500 $602,500

Answers

As given that Minstrel Manufacturing uses a job order costing system, and we have the data for a month as follows:Purchased raw materials on credit = $188,000Issued materials to production = $215,000Direct materials issued = $215,000 - $10,000 (indirect materials) = $205,000Factory payroll = $159,000Indirect labor = $20,000Predetermined overhead rate = 150%Total manufacturing costs = ?

To find the total manufacturing costs, we need to calculate the total amount of indirect labor and overhead costs.Let's calculate the indirect labor cost:Indirect labor cost = $20,000And, manufacturing overhead cost = (150/100) × ($159,000 - $20,000) = $187,500Now,

we can find the total manufacturing costs added during the period:Total manufacturing cost = Direct materials + Direct labor + Manufacturing overhead= $205,000 + ($159,000 - $20,000) + $187,500= $205,000 + $139,000 + $187,500= $531,500Therefore, the total manufacturing costs added during the period is $531,500.

To know more about Manufacturing visit:

https://brainly.com/question/29489393

#SPJ11

rbitrageurs (people who engage in arbitrage) decide to practice their craft in the market for corn. Which of the following will happen? Corn will become less expensive during the harvest season than in previous harvest seasons. Corn will become less expensive during the offseason than in previous offseasons. Seasonal price fluctuations of corn will increase. The offseason price of corn will be consistently less than the harvest season price.

Answers

Arbitrageurs (individuals who are engaged in arbitrage) deciding to practice their craft in the market for corn is likely to have an impact on seasonal price fluctuations of corn, which will most likely increase. Arbitrage is the process of purchasing and selling the same asset in different markets or locations to gain profit from price differences.

Which is why arbitrageurs are always seeking to purchase the asset at a lower price and sell it at a higher price in a different location. As a result, the price differences between the harvest season and offseason prices of corn will diminish, making seasonal price fluctuations more pronounced. In other words, during the harvest season, the arbitrageurs may purchase corn in bulk at the current low prices to sell it at a higher price in the offseason.

Similarly, they may sell corn during the offseason to purchase the asset at a lower price during the harvest season. By doing so, they are reducing the price differences between the harvest and offseason prices, which increases the seasonal price fluctuations of corn in the market. However, the impact of this arbitrage practice on the prices of corn in the market will depend on the magnitude of demand and supply of corn during the harvest and offseason.

Therefore, seasonal price fluctuations of corn will increase when arbitrageurs practice their craft in the market for corn.

To know more about Arbitrage visit :

https://brainly.com/question/30480233

#SPJ11

Other Questions
A coin sold at auction in 2019 for $3,215,000. The coin had a face value of $20 when it was issued in 1791 and had been previously sold for $385,000 in 1974.a. At what annual rate did the coin appreciate from its first minting to the 1974 sale? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.)b. What annual rate did the 1974 buyer earn on his purchase? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.)c. At what annual rate did the coin appreciate from its first minting to the 2019 sale? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) Moving to another question will save this response. estion 22 An AM detector with an RC circuit is used to recover an audio signal with 8 kHz. What is a suitable resistor value R in kQ if C has a capacitance equals 12 nF? & Moving to another question will save this response. In the circuit shown above, all initial conditions are zero. A DC voltage source vin=12V is applied to the circuit at time t=0 as a step input. (a) Let R=3 in the circuit shown above. Find the voltage across the capacitor vC(t) using time-domain methods. (b) What type of a step response does the circuit show for the component values in part (a)? Explain your reasoning with a single sentence. (c) What should be the value of the resistor R in the circuit in order for the circuit to show a critically damped response to the step input given in part (a)? Suppose a 410 matrix A has three pivot columns. Is Col A=R ^3 ? Is Nul A=R ^7 ? Explain your answers. Is Col A=R ^3? A. No, Col A is not R^ 3. Since A has three pivot columns, dim Col A is 7 Thus, Col A is equal to R^ 7B. No. Since A has three pivot columns, dim Col A is 3 . But Col A is a three-dimensional subspace of R ^4so Col A is not equal to R ^3C. Yes. Since A has three pivot columns, dim Col A is 3. Thus, Col A is a three-dimensional subspace of R^ 3 , so Col A is equal to R ^3D. No, the column space of A is not R^ 3 Since A has three pivot columns, dim Col A is 1 . Thus. Col A is equal to R. Question 42 This is a "high art" that represents human emotional experiences Catharsis Musicals Movies Opera Calculate the sphericity of a cube of the edge length of a, and a circular cylinder with a diameter of d and the height h (d = 1.5 h)? 2. Find an external topic about stereotyping in workplaces and how it affected the level of attraction for specific jobs between males and females. For example, why is the female representation in some jobs higher than males and vice versa? Why some jobs are more attractive to males than females? What is the effect of self-concept on males or females on the attractiveness of certain jobs? (15 marks) Minimum of three pages double-spaced. and clarited /6 markel A chemical company polluting a nearby river results in a: A. Positive externality B. Zero waste costs C. Good company strategy D. Negative externality 4. Let a = 37.3125 and b = 1.6125.(a) Find the double-precision IEEE 754 representation of a and b in hex-adecimal base.(b) Find the single-precision IEEE 754 representation of a and b in hex-adecimal base.(c) Find the single-precision IEEE 754 representation of a+b in hex-adecimal base.(d) Find the single-precision IEEE 754 representation of ab in hex-adecimal base.(d) Find the single-precision IEEE 754 representation of ab in hex-adecimal base. You have two stock solutions to make a buffer at pH= 5.00. One stock Nolcution is sodium isetate and is 0.10M. Yot afso have a stock solution of acetic acid that is 0.25M. Calculate the volume in mL of the 0.25MCH_3COOH solution needed te prephare 300 mL of 0.10M buffer solution at pH5.0020K_n of (CH_3CO_2H_2=1.810^5)Select one: a. 25mL b. 13 mL. c. 32 mL d. 7.1 mL. e. 18 mL Which delivery system involves the most risk for the contractor? A)DBB B)CMBRISK C)DB D)CMORISK How and why did many colonists come to believe that membership inthe British empire was a threat to their freedom, rather than thefoundation of their freedom? Howdis Immigration impact the growth of NYc? what were the auses ofimmigration in the 19th century? where did immigrants settle? Which event best illustrates the minsters good side What is the best analysis of this passage? What is the Binding Energy the last neutron of 15 N ? Enter your answer to 3 Sigfigs with proper energy units of nuclear Physics. Regrading the characteristics of the variables in our model, choose the correct words below. "When the central bank permanently increased the nominal money supply, the real money supply would (decrease / increase) in the long-run toward its initial value. The equilibrium output can change in the (long ( short) run. The price level can change in the (long / short) run." In a petrochemical unit ethylene, chlorine and carbon dioxide are stored on site for polymers pro- duction. Thus: Task 1 [Hand calculation] Gaseous ethylene is stored at 5C and 25 bar in a pressure vessel of 25 m. Experiments conducted in a sample concluded that the molar volume at such conditions is 7.20 x 10-4mmol-1. Two equations of state were proposed to model the PVT properties of gaseous ethylene in such storage conditions: van der Waals and Peng-Robinson. Which EOS will result in more accurate molar volume? In your calculations, obtain both molar volume and compressibility factor using both equations of state. Consider: Tc = 282.3 K, P = 50.40 bar, w = 0.087 and molar mass of 28.054 g mol-. [9 Marks] Task 2 [Hand calculation] 55 tonnes of gaseous carbon dioxide are stored at 5C and 55 bar in a spherical tank of 4.5 m of diameter. Assume that the Soave-Redlich-Kwong equation of state is the most accurate EOS to describe the PVT behaviour of CO in such conditions: i. Calculate the specific volume (in mkg) of CO at storage conditions. [6 Marks] ii. Calculate the volume (in m) occupied by the CO at storage conditions. Could the tank store the CO? If negative, calculate the diameter (minimum) of the tank to store the gas. [4 Marks] For your calculations, consider: Te = 304.2 K, P = 73.83 bar, w = 0.224 and molar mass of 44.01 g mol-. Task 3 [Computer-based calculation] Calculate the molar volume and compressibility factor of gaseous CO at 0.001, 0.1, 1.0, 10.0, 70.0 and 75.0 bar using the Virial, RK and SRK equations of state. Temperature of the gas is 35C. For your calculations, consider: To = 304.2 K, P = 73.83 bar, w = 0.224 and molar mass of 44.01 g mol-. [12 Marks] Note 1: All solutions should be given with four decimal places. Task 4 [Computer-based calculation] During a routine chemical analysis of gases, a team of process engineers noticed that the thermofluid data of the storage tank containing ethylbenzene was not consistent with the expected values. After preliminary chemical qualitative analysis of gaseous ethylbenzene, they concluded that one of the following gases was also present in the tank (as contaminant): carbon dioxide (CO) or ethylene (CH4). A further experimental analysis of the contaminant gas at 12C revealed the volumetric relationship as shown in Table 1. Determine the identity of the contaminant gas and the equation of state that best represent the PVT behaviour. For this problem, consider just van der Waals, Redlich-Kwong and Peng-Robinson equations of state. In order to find the best candidate for the contaminant Assignment: Line Input and Output, using fgets using fputs using fprintf using stderr using ferror using function return using exit statements. Read two text files given on the command line and concatenate line by line comma delimited the second file into the first file.Open and read a text file "NoInputFileResponse.txt" that contains a response message "There are no arguments on the command line to be read for file open." If file is empty, then use alternate message "File NoInputFileResponse.txt does not exist" advance line.Make the program output to the text log file a new line starting with "formatted abbreviation for Weekday 12-hour clock time formatted as hour:minutes:seconds AM/PM date formatted as mm/dd/yy " followed by the message "COMMAND LINE INPUT SUCCESSFULLY READ ".Append that message to a file "Log.txt" advance newline.Remember to be using fprintf, using stderr, using return, using exit statements. Test for existence of NoInputFileResponse.txt file when not null print "Log.txt does exist" however if null use the determined message display such using fprintf stderr and exit.exit code = 50 when program can not open command line file. exit code = 25 for any other condition. exit code = 1 when program terminates successfully.Upload your .c file your input message file and your text log file.file:///var/mobile/Library/SMS/Attachments/20/00/4F5AC722-2AC1-4187-B45E-D9CD0DE79837/IMG_4578.heic Part (a) Explain how flux and torque control can be achieved in an induction motor drive through vector control. Write equations for a squirrel-cage induction machine, draw block diagram to support your answer. In vector control, explain which stator current component gives a fast torque control and why. Part (b) For a vector-controlled induction machine, at time t = 0s, the stator current in the rotor flux-oriented dq-frame changes from I, = 17e58 A to , = 17e28 A. Determine the time it will take for the rotor flux-linkage to reach a value of || = 0.343Vs. Also, calculate the final steady-state magnitude of the rotor flux-linkage vector. The parameters of the machine are: Rr=0.480, Lm = 26mH, L, = 28mH Hint: For the frequency domain transfer function Ard Lmisd ST+1' the time domain expression for Ard is Ard (t) = Lmsd (1 - e Part (c) If the machine of part b has 8 poles, calculate the steady-state torque before and after the change in the current vector. Part (d) For the machine of part b, calculate the steady-state slip-speed (in rad/s) before and after the change in the current vector. Comment on the results you got in parts c and d.