you’ve had a light snack that has 14 grams of glucose, 4 grams of olive oil, and 3 grams of amino acids. How many calories are in your snack?

3 Cu + 8HNO3 → 3 Cu(NO3)2 + 2 NO + 4 H2O

n(HNO3)=6.3mol

unknown/known=4/8=1/2

n(H2O)=n(HNO3)/2=3.15mol

m(H2O)=nxM=3.15x(1+1+16)=56.7g

Let me know if its wrong

Gyroscope training is advantageous for astronauts because it improves their coordination, balance, and spatial orientation in a microgravity simulation. Also, it can enhance their capacity for jobs in space and help them become less prone to motion sickness.

Gyroscopes in spacecraft alert the onboard computer when the craft has changed orientation (direction and pointing). The stabilising system for the spaceship receives the data from the computer after that.

To become a fully qualified astronaut, you may need to complete up to two years of training. The International Space Station and the Space Shuttle must be introduced to candidates.

To know more about coordination visit:-

https://brainly.com/question/27289242

#SPJ9

Answer: 3.23 x 10^23

Explanation: The number of molecules is found when the number of moles is multiplied by Avogadro's number, which is 6.022 x 10^23

5.36 moles x 6.022 x10^23 = 3.23 x 10^23

Answer: True

Explanation: Physical Quantity which enables an object to do work is Energy. When an object does work, then its work done is only possible when the object has Kinetic Energy, Potential Energy or Both (Mechanical Energy) in it.

Acid will be diluted by water, resulting in a reduction in the concentration of H+ ions. As a result, the solution's pH will rise.

The exothermic reaction that occurs when concentrated acid is mixed with water might result in burns due to the heat that is produced. On the other hand, when acid is gradually added to water while swirling continuously.

A basic solution's pH lowers and its hydroxide ion concentration decreases when water is added to it. The pH of the solution drops gradually toward 7 as additional water is added, and it gradually becomes less alkaline.

To know more about concentration visit:-

https://brainly.com/question/10725862

#SPJ1

Answer: 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.

Explanation:

The chemical equation for the reaction between copper and silver nitrate is:

Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag

From this equation, we can see that 1 mole of copper reacts with 2 moles of silver nitrate.

To find how many moles of copper are required to replace silver from 4.0 moles of silver nitrate, we need to use the mole ratio between copper and silver nitrate.

1 mole of copper reacts with 2 moles of silver nitrate, so:

1 mole Cu / 2 moles AgNO3

To calculate how many moles of copper are needed to replace 4.0 moles of silver nitrate, we can use the mole ratio as follows:

4.0 moles AgNO3 x (1 mole Cu / 2 moles AgNO3) = 2.0 moles Cu

Therefore, 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.

Answer:2.00 moles Cu

Explanation:4.0mol AgNO3 x 1 mol cu

/ 2 mol Ag NO3

The change in enthalpy for the reaction is -7.57 × 10^4 J/mol. This negative value indicates that the reaction is exothermic, meaning it releases heat to the surroundings.

To calculate the change in enthalpy, we need to use the equation:

ΔH = -q / n

where ΔH is the change in enthalpy, q is the heat absorbed or released by the reaction, and n is the number of moles of limiting reactant.

First, we need to determine the limiting reactant. This can be done by comparing the number of moles of each reactant:

moles of AgNO3 = (23 mL) x (0.100 mol/L) = 0.0023 mol

moles of HCl = (27 mL) x (0.1000 mol/L) = 0.0027 mol

Since AgNO3 has a smaller number of moles, it is the limiting reactant.

Next, we need to calculate the heat absorbed or released by the reaction. We can do this using the equation:

q = m × c × ΔT

where q is the heat absorbed or released, m is the mass of the solution, c is the specific heat capacity of the solution, and ΔT is the temperature change.

Assuming the specific heat capacity of the solution is 4.18 J/(g·K) and the density of the solution is 1.00 g/mL, we can calculate the mass of the solution:

mass of solution = (23 mL + 27 mL) × (1.00 g/mL) = 50 g

Substituting the values, we get:

q = (50 g) × (4.18 J/(g·K)) × (24.62°C - 23.81°C) = 174.5 J

Finally, we can calculate the change in enthalpy using the equation:

ΔH = -q / n

ΔH = -(174.5 J) / (0.0023 mol) = -7.57 × 10^4 J/mol

To learn more about enthalpy

https://brainly.com/question/13996238

#SPJ4

The valence electrons of a crystal that is an excellent conductor are typically free to move throughout the crystal lattice.

This is because the crystal has a metallic bond, which is a type of chemical bond that occurs between atoms of metallic elements. In a metallic bond, valence electrons are delocalized and can move freely throughout the crystal structure, leading to the excellent conductivity of metals.

In contrast, materials with ionic or covalent bonds have electrons that are tightly bound to individual atoms and are not free to move throughout the crystal lattice. As a result, these materials are typically poor conductors of electricity.

Therefore, the valence electrons in a crystal that is an excellent conductor are delocalized and free to move, allowing the crystal to conduct electricity efficiently.

To know more about conductivity, visit:

https://brainly.com/question/12136944

#SPJ1

The total number of atoms for each element in a chemical equation that is balanced is the same on both sides of the equation.

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.

For the chemical equation to adhere to the rule of conservation of mass, it must be balanced. A chemical equation is said to be balanced when the number of various elemental atoms on the reactants and products sides are equal.

To learn more about balanced equations visit:

brainly.com/question/2399130

#SPJ1

Schrodinger's Quantum Mechanical Model, which is currently recognised by modern science, is the electron model. The electron cloud model is another name for this one.

The term "electron cloud" refers to the current atomic structure model. A physicist from Austria named Edwin Schrodinger argued that electrons do not follow static or permanent trajectories.

The contemporary atomic model, often known as the cloud model, depicts atoms as having a nucleus made up of protons and neutrons and a diffuse gradient or cloud surrounding it that is made up of electrons. Because electron activity is probabilistic, electrons are often depicted as clouds.

To know more about electron visit:-

https://brainly.com/question/28977387

#SPJ1

It should be noted that to explain why the distribution of water storage traits changed over time, a model could employ various techniques from statistical analysis and machine learning.

One possible approach is as follows:

Data Collection: Gather data on water storage traits for a given population over a specific period. The data could include measurements of leaf water potential, stomatal conductance, osmotic adjustment, and other relevant traits.

Data Preprocessing: Clean the data, remove outliers, and normalize the data if necessary.

Exploratory Data Analysis: Conduct a visual and statistical analysis of the data to identify trends, patterns, and correlations. This could include scatterplots, histograms, boxplots, and correlation matrices.

Time-Series Analysis: Use time-series analysis techniques to investigate changes in the distribution of water storage traits over time. This could include fitting time-series models, decomposing the time series, and analyzing the autocorrelation and seasonality of the data.

Hypothesis Testing: Develop hypotheses about why the distribution of water storage traits changed over time, and test these hypotheses using statistical tests such as t-tests, ANOVA, and regression analysis.

Learn more about water on

https://brainly.com/question/1313076

#SPJ1

The balanced chemical equation for the reaction between HI and RbOH is:

HI + RbOH → RbI + H2O

From the equation, we can see that 1 mole of HI reacts with 1 mole of RbOH to produce 1 mole of RbI and 1 mole of H2O.

To determine the molarity of the initial RbOH, we can use the following formula:

Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)

First, let's calculate the number of moles of HI in the 300 mL sample:

moles of HI = Molarity x volume in liters

moles of HI = 2.15 mol/L x 0.3 L

moles of HI = 0.645 mol

Since 1 mole of HI reacts with 1 mole of RbOH, the number of moles of RbOH used in the titration is also 0.645 mol.

Now, we can use the volume and concentration of the RbOH solution to calculate its molarity:

Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)

Molarity of RbOH = 0.645 mol / 0.212 L

Molarity of RbOH = 3.04 M

Therefore, the molarity of the initial RbOH solution was 3.04 M, which corresponds to the aqua green option.

Answer:

The balanced chemical equation for the reaction between hydriodic acid (HI) and rubidium hydroxide (RbOH) is:

HI + RbOH → RbI + H2O

From the balanced equation, we can see that the stoichiometry of the reaction is 1:1, which means that 1 mole of HI reacts with 1 mole of RbOH.

Given that a 300 mL sample of HI with a concentration of 2.15 M is completely neutralized by 212 mL of RbOH, we can use the following equation to determine the molarity of RbOH:

Molarity of HI x Volume of HI = Molarity of RbOH x Volume of RbOH

2.15 M x 0.300 L = Molarity of RbOH x 0.212 L

Molarity of RbOH = (2.15 M x 0.300 L) / 0.212 L = 3.04 M

Therefore, the molarity of the initial RbOH solution was 3.04 M, option (aqua green).

We must identify the limiting reactant and use that information to compute the maximum amount of hydrofluoric acid that can be produced in order to provide answers to these questions. Calculating the quantity of extra reactant left behind after the reaction is finished is also necessary.

A limiting reagent is a reactant in a chemical reaction that controls how much product is created, according to the definition of the term. Because the reactions between the elements and compounds in a balanced chemical equation depend on their mole ratios, the use of a limiting reactant is necessary.

A substance that takes part in a chemical reaction is known as a limiting reactant. It establishes the maximum product amount that

To know more about   tetrafluoride visit:-

brainly.com/question/27590943

#SPJ1

The volume of the solution is 39.6 mL. Solutions can be formed by dissolving solids, liquids, or gases in a liquid solvent or by dissolving gases in a solid solvent.

What is Solution?

A solution is a homogeneous mixture of two or more substances in which the components are uniformly distributed on a molecular or ionic level. In a solution, the substance that is present in the largest amount is called the solvent, and the substance that is present in smaller amounts is called the solute.

We can use the following formula to calculate the volume of the solution:

Molarity (M) = moles of solute (n) / volume of solution in liters (V)

First, we need to calculate the number of moles of Cu(NO3)2:

mass of Cu(NO3)2 = 6.25 g

molar mass of Cu(NO3)2 = 187.56 g/mol (63.55 g/mol for Cu + 2x14.01 g/mol for N + 6x16.00 g/mol for O)

moles of Cu(NO3)2 = mass / molar mass = 6.25 g / 187.56 g/mol = 0.0333 mol

Next, we can rearrange the formula to solve for the volume of the solution:

V = n / M

V = 0.0333 mol / 0.840 M = 0.0396 L

Finally, we convert the volume to milliliters:

V = 0.0396 L x 1000 mL/L = 39.6 mL

Learn more about Solution from the given link

https://brainly.com/question/25326161

#SPJ1

2.29 moles of boron trifluoride contain 1.38  10²⁴ atoms of boron.

One boron atom and three fluorine atoms make up the trigonal planar molecule known as boron trifluoride.

The atomic masses of boron (B) and fluorine (F), which are 10.81 g/mol and 18.99 g/mol respectively, may be added to determine the molar mass of boron trifluoride (BF3).

Molar mass of BF3 = (1 × molar mass of B) + (3 × molar mass of F)

Molar mass of BF3 = (1 × 10.81 g/mol) + (3 × 18.99 g/mol)

Molar mass of BF3 = 67.81 g/mol

Now we can calculate the number of moles of BF3 using its given mass:

Mass of BF3 / molar mass of BF3 equals moles of BF3.

moles of BF3 = 2.29 moles

1 mole of BF3 contains 1 mole of B

1 mole of B contains Avogadro's number (6.02 × 10²³) atoms of B

Therefore, the number of atoms of boron in 2.29 moles of BF3 is:

2.29 moles of BF3 x (1 mole of B / 1 mole of BF3) x (6.02 × 10²³ atoms of B / 1 mole of B) = 1.38 × 10²⁴ atoms of B.

To know more about boron trifluoride visit:-

https://brainly.com/question/9356683

#SPJ1

In the periodic table, strontium (Sr) and calcium (Ca) both belong to Group 2A, sometimes referred to as the alkaline earth metals.

After the disaster, radioactive substances were primarily spread by contaminated rain on open surfaces like lawns, parks, roadways, and building roofs. Due to the effects of wind, rain, traffic, street washing, and cleanup since then, there is less surface contamination in metropolitan areas.

At least 5% of the radioactive reactor core was discharged into the atmosphere following the steam explosion and fires.

To know more about radioactive visit:-

https://brainly.com/question/7180704

#SPJ1

The correct answer is d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.

The pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water cannot be determined without additional information, such as the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor. These factors would need to be known in order to calculate the final pressure of the gas using the ideal gas law.

Therefore, it is important to have accurate experimental data and perform proper calculations to determine the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water.

To learn more about butane gas visit;

https://brainly.com/question/15123098

#SPJ4

Correct question:

What is the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water in Experiment 2?

a) 1 atm

b) 2 atm

c) 3 atm

d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.

The product of the hydrolysis of pentanamide with hcl are pentanoic acid and ammonium chloride, so correct answer would be Option C&D.

In chemistry and biology, hydrolysis refers to a double decomposition reaction in which water participates. Therefore, the hydrolysis reaction may be represented by the reversible chemical equation AB + HOH ⇌ AH + BOH, if a compound is represented by the formula AB in which A and B are atoms or groups and water is represented by the formula HOH. Other than water, the reactants in a hydrolysis reaction can be neutral molecules, as they are in the majority of cases when organic compounds are involved, or ionic molecules, as they are in the cases of salts, acids, and bases.

Visit here to learn more about the hydrolysis: https://brainly.com/question/10840252

#SPJ4

Answer:

1. The molar mass of copper is 63.55 g/mol. To find the number of moles of copper in 5.00 grams, we divide the given mass by the molar mass:

5.00 g Cu / (63.55 g/mol Cu) = 0.0787 mol Cu

Therefore, there are 0.0787 moles of copper in 5.00 grams of copper wire.

2. The molar mass of glycine (C2H5O2N) is:

12.01 g/mol (C) + 1.01 g/mol (H) x 5 + 16.00 g/mol (O) x 2 + 14.01 g/mol (N) = 75.07 g/mol

To find the number of moles of glycine in 28.35 grams, we divide the given mass by the molar mass:

28.35 g glycine / (75.07 g/mol glycine) = 0.377 mol glycine

Therefore, there are 0.377 moles of glycine molecules in 28.35 grams of glycine.

3. a. To find the mass of 1.42 x 10^-4 mol of vitamin C, we multiply the molar mass of vitamin C (176.12 g/mol) by the number of moles:

1.42 x 10^-4 mol x 176.12 g/mol = 0.0248 g

Therefore, the mass of the recommended daily dietary allowance of vitamin C for children aged 4-8 years is 0.0248 grams.

b. The molecular formula of vitamin C is C6H8O6, so there are 6 moles of carbon for every mole of vitamin C. Therefore, there are:

1.42 x 10^-4 mol x 6 = 8.52 x 10^-4 mol of carbon

in 1.42 x 10^-4 mol of C6H8O6.

4. To rank the following from lowest number of particles to highest, we need to compare the number of particles in each of the given amounts.

2.3 mol H2O: 2.3 mol x 6.022 x 10^23 molecules/mol = 1.39 x 10^24 molecules of H2O

3.5 mol H2: 3.5 mol x 6.022 x 10^23 molecules/mol = 2.11 x 10^24 molecules of H2

0.50 mol C100H202: 0.50 mol x 6.022 x 10^23 molecules/mol = 3.01 x 10^23 molecules of C100H202

Therefore, the ranking from lowest to highest number of particles is:

0.50 mol C100H202 < 2.3 mol H2O < 3.5 mol H2.

The reasoning is based on the Avogadro's number which represents the number of particles in one mole of a substance, which is equal to 6.022 x 10^23. The substance with the smallest number of moles has the smallest number of particles, and the substance with the largest number of moles has the largest number of particles.

The total volume of the solution is 89.6 milliliters. The percentage of isopropanol is 76.4% (v/v), so 76.4% of the total volume is isopropanol.

Isopropanol, also known as isopropyl alcohol, is a colorless, flammable liquid with a strong odor. Isopropanol is the simplest example of a secondary alcohol, and is frequently used as a cleaning agent and disinfectant in many industries. It is also used in the production of acetone.

Rubbing alcohol, which is also known as isopropyl alcohol, is a clear liquid chemical compound. It is used as a topical antiseptic because it has a strong disinfectant and antibacterial action. Rubbing alcohol is also used as an fuel additive in automobiles, as a cleaning solvent in industry, and as a solvent in chemical reactions. Additionally, it can be used as a disinfectant for medical and cosmetic purposes, including cleansing wounds and preventing infection.

To calculate the amount of isopropanol, we must multiply 89.6 milliliters by 76.4%. 89.6 milliliters x 0.764 = 68.6064 milliliters of isopropanol Therefore, there are 68.6064 milliliters of isopropanol in a 89.6 mL sample of the rubbing alcohol solution.

To know more about isopropanol, visit:

https://brainly.com/question/22284953

#SPJ1

Answer: the pH would decrease

Explanation:

bases are alkaline which means that thir pH would in the category between 14 and 8

Water is neutral which meand that it's pH is at 7

so if you add water to a base then the concentration the pH would eventually decrease towards a 7

hope it helps✨✨

Answer:

partial pressure of H2 = 0.9574 atm OR 727.6 mmHg

Explanation:

in case of collection of gas over water:

[tex]P_{atm} = P_{vapor} + P{gas}[/tex]

[tex]P_{atm}[/tex]: atmospheric pressure

[tex]P_{vapor}[/tex]: pressure of water vapor (must be given in the question!)

[tex]P_{gas}[/tex]: pressure of gas

in this question:

water vapor pressure at 283K (10°C) = 9.6 mmHg (again, this must be given in the question)

Given: [tex]P_{atm}[/tex] = 0.97 atm = 737.2 mmHg

by substitution in the formula:

737.2 = 9.6 + [tex]P_{H_2}[/tex]

[tex]P_{H_2}[/tex] = 727.6 mmHg = 0.9574 atm

B. A balanced chemical equation and the molar mass of all elements are needed in order to calculate the moles of Oxygen needed to react with 5g of Diethylzinc.

To calculate the moles of Oxygen needed to react with 5g of Diethylzinc, we need a balanced chemical equation and the molar mass of all elements involved. The balanced chemical equation will provide us with the stoichiometric ratio between Diethylzinc and Oxygen in the reaction, while the molar mass of Oxygen will allow us to convert the given mass of Diethylzinc into moles

Therefore, The balanced chemical equation will tell us the mole ratio of Diethylzinc and Oxygen, and the molar mass of Oxygen will be used to convert the given mass of Diethylzinc to moles.

Read more about Oxygen here:

https://brainly.com/question/26073928

#SPJ1

Since this equals (edge length)3, the cube's volume is 3 * 1.12 cm, or 3.36 cm3. As a result, the cube has 3.36/8.96 g/cm3 = 0.43 grammes of copper atoms.

V= s3, where s is the length of one of the cube's edges, is the formula for a cube's volume. The length of the edge is equal to the volume's cube root, or 4 cm, if the volume is 64.

To get the number of moles in an element or compound, divide the supplied mass by the element or compound's molar mass.

To know more about copper visit:-

brainly.com/question/26474177

#SPJ1

We need 117.76 mL volume of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.

What is volume?

To solve this problem, we can use the formula:

mass = molarity x volume x molar mass

where mass is the mass of the solute (in grams), molarity is the concentration of the solution (in moles per liter), volume is the volume of the solution (in liters), and molar mass is the mass of one mole of the solute (in grams per mole).

First, we need to calculate the molar mass of silver fluoride (AgF):

AgF = 1 x 107.87 + 1 x 18.998 = 126.868 g/mol

Next, we can rearrange the formula above to solve for volume:

volume = mass / (molarity x molar mass)

Substituting the given values:

volume = 17.8 g / (0.124 mol/L x 126.868 g/mol)

volume = 117.76 mL

Therefore, we need 117.76 mL of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.

To know more about molar mass, visit:

https://brainly.com/question/22997914

#SPJ1

Complete question is: 117.76 milliliters of an aqueous solution of 0.124 M silver fluoride is needed to obtain 17.8 grams of the salt.

Answer:

The molecular formula of butanedione = C4 h6 O2