3.
What is sonography?
using infrasonic waves to communicate long distances
through the ground
using ultrasonic waves to communicate and hunt for prey
MacBook Air
using infrasonic waves to create images of submerged
objects
using ultrasonic waves to create images of objects found
inside other objects

It takes source B 40 s to complete two half lives.

The half-life of a chemical is the amount of time it takes for half of the atoms in a sample to decay. This concept is widely used to describe how quickly a substance decays radioactively in nuclear physics and radiochemistry. Each radioactive substance has a unique half-life due to the properties of each atomic nucleus.

Looking at the graph, we can see that the half life of the source B is 20s .

Hence the time taken to complete two half lives = 2(20 s) =  40 s.

Learn more about half life:https://brainly.com/question/24710827

#SPJ1

Answer:

We can approach this problem using the conservation of momentum and the conservation of kinetic energy.

Conservation of momentum:

The momentum before the collision is given by:

p1 = m1v1 = m1viî

where m1 is the mass of each proton (which we assume to be the same) and v1 is the velocity of the initially moving proton.

The momentum after the collision is given by:

p2 = m1v1' + m1v2'

where v1' and v2' are the velocities of the two protons after the collision.

Since the collision is elastic, the total momentum is conserved:

p1 = p2

m1viî = m1v1' + m1v2'

We can simplify this equation by dividing both sides by m1:

viî = v1' + v2'

Conservation of kinetic energy:

The kinetic energy before the collision is given by:

K1 = (1/2)m1 We need the value of the velocity v1, which is not given in the problem statement.

(a) The S-P difference of the wave is determined as is 40 sec.

(b) The amplitude of the wave is determined as is 10 mm

(c) The distance of the wave is determined as is 380 km

(d) The magnitude of the wave is determined as is 4.5

The amplitude of a wave is the maximum displacement or distance that a wave moves from its rest position to its crest (the highest point) or trough (the lowest point). In other words, it is the measure of the strength or intensity of a wave.

Question 1:

From the graph, the S-P difference, that is between S and P = 40 s - 0 s

= 40 s

Question 2:

The distance (km) corresponding to 40 sec is 380 km.

Question 3:

The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.

Question 4:

The corresponding magnitude of the wave is 4.5.

Learn more about amplitude here:

https://brainly.com/question/3613222

#SPJ1

(a) The S-P difference (sec) is 40 sec.

(b) The amplitude (mm) is 10 mm

(c) The distance (km) is 380 km

(d) The magnitude (M) is 4.5

The S-P wave difference (sec) is a measure used in seismology to determine the distance between a seismic station and an earthquake source.

From the graph, the S-P difference, that is between S and P = 40 s - 0 s

= 40 s

The distance (km) corresponding to 40 sec is 380 km.

The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.

The corresponding magnitude of the wave is 4.5.

Learn more about S-P wave difference here: brainly.com/question/15225142

#SPJ1

uk

because they have a Sexuality law

part a.

The source angular frequency is 2.23 rad/s.

part b.

The resistance of the resistor is 4.46 Ω.

The source angular frequency is given as:

ω = 1/√(LC)

where = is the inductance,

C =  capacitance,

ω= angular frequency.

Substituting the  values, we have:

ω = 1/√(20.0 mH x 10.0 mF) = 1/√(0.2) = 1/0.447 = 2.23 rad/s

part b.

We use the impedance in a parallel RLC circuit:

Z = R/(1 - ω^2LC)

impedance of the inductor branch is given as:

Z = jωL

impedance of the capacitor branch :

Z = -j/(ωC)

impedance of the resistor branch :

Z = R

We set all the impedances together at:

jωL = -j/(ωC) = R

We now solve for

R = ωL/ωC

R = = (2.23 rad/s)(20.0 mH)/(10.0 mF)(2.23 rad/s)

R = 4.46 Ω

Learn more about impedances at:

https://brainly.com/question/24225360

#SPJ1

A chemical process known as hydrogen displacement occurs when hydrogen gas is replaced or displaced by another element or molecule.

It results from a number of reactions, most of which involve a reactive metal or substance. A metal reacting with an acid can displace hydrogen atoms of the acid, resulting in the formation of a salt and the release of hydrogen gas as an example.

Another example is the interaction of a metal with water molecules, which displaces hydrogen atoms and results in the formation of metal hydroxide and hydrogen gas. Chemistry studies hydrogen displacement reactions in great detail because they are important for understanding the reactivity of various compounds. They shed light on the behavior of elements, how well they can replace hydrogen, and how new compounds are formed.

Learn more about hydrogen displacement, here:

https://brainly.com/question/20344192

#SPJ5

When the ball hits the racquet, it gets squished, and it gains elastic energy, since it is compressed.

Answer:

Both hard copy and digital storage have their own advantages and disadvantages, and which one is better largely depends on the specific use case and personal preferences. Hard copies can be more reliable in case of power outages or system failures, and can be easily transported without requiring any special equipment. Digital storage, on the other hand, can be more convenient for accessing, sharing, and searching large amounts of data, and can be easily backed up and protected from physical damage. Ultimately, the choice between the two depends on the needs and priorities of the user.

Explanation:

I think that digital storage would be the better option of the two. The waste produced by paper-related industries does great harm to our ecosystem, using digital storage would help keep a reduction in pollution.

Also, having a hard copy paper, you might misplace and lose it. If you use digital storage you have easy access and retrieval. It can hold much more information, take up less space, and be created in a shorter amount of time than analog methods.

The best description of the image is (B) upright, smaller, and virtual is correct option.

To determine the characteristics of the image, we can use the thin lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

We can also use the magnification equation:

m = -di/do

where m is the magnification.

First, we need to determine the focal length of the lens. We can use the fact that the lens is centered over the 14 cm ruler at the 7 cm mark, which means the lens is 7 cm from both the left and right sides of the ruler. Since the ruler has a total length of 14 cm, the lens must be in the middle, and the distance from the lens to the ruler is 7 cm. Therefore, the lens has a focal length of 7 cm.

Next, we can use the thin lens equation to find the image distance for the arrow located at the 6 cm mark:

1/7 = 1/(6 - 7) + 1/di

di = -7 cm

The negative sign indicates that the image is inverted.

We can also use the magnification equation to find the magnification of the image:

m = -di/do = -(-7)/(-6) = 7/6

The positive magnification indicates that the image is upright.

Finally, we can use the image distance and magnification to determine the characteristics of the image. Since the image distance is negative, the image is virtual. Since the magnification is less than 1, the image is smaller.

Therefore, the best description of the image is upright, smaller, and virtual.

To know more about image

https://brainly.com/question/12494813

#SPJ1

Answer:

upright, smaller virtual

Explanation:

Here's the circuit diagram:

```

   +---R₁---R₂---+

   |             |

   -             -

  (6V)          ( )

                 |

                 |

                 |

                 |

                 |

                 |

                 |

                ( )

                -

```

Calculations:

1. The total resistance of the two resistors:

  R_total = R₁ + R₂

          = 12 ohm + 24 ohm

          = 36 ohm

  Answer: 36 ohm

2. The total current flowing in the circuit:

  I = V / R_total

    = 6.0 V / 36 ohm

    = 0.167 A

  Answer: 0.167 A

3. The current flowing in R₁:

  I₁ = V / R₁

     = 6.0 V / 12 ohm

     = 0.5 A

  Answer: 0.5 A

4. The current flowing in R₂:

  I₂ = V / R₂

     = 6.0 V / 24 ohm

     = 0.25 A

  Answer: 0.25 A

5. The total power consumed by R₁ and R₂:

  P = I² * R_total

    = (I₁ + I₂)² * R_total

    = (0.5 A + 0.25 A)² * 36 ohm

    = 0.1875 * 36 ohm

    = 6.75 W

  Answer: 6.75 W

A continuous signal that changes in frequency and amplitude over time is referred to as an analogue signal. A digital signal one can only take on a small number of values and is commonly represented by 0s and 1s.

Being able to take on any value within a continuous range of values makes it the perfect choice for simulating physical phenomena like temperature, sound, and light. Analogue signals include things like radio waves, vinyl records, and conventional telephone networks. Modern communication and computing systems use digital signals instead of analogue ones because they can be transferred and processed more effectively and are less prone to noise. Computer networks and digital cameras are few examples of digital signals.

To know more about Computer networks, here

brainly.com/question/14276789

#SPJ1

The initial common temperature of the water and copper is approximately 2.68°C.

To find the hidden typical temperature of the water and copper, we need to use the norm of protection of energy, which communicates that energy can't be made or obliterated, recently moved or changed beginning with one design then onto the following.

The force lost by the ice as it breaks up is identical to the power obtained by the water and the calorimeter. We can impart this using the recipe:

Q_ice = Q_water + Q_calorimeter

where Q_ice is the force lost by the ice, Q_water is the power procured by the water, and Q_calorimeter is the force gained by the calorimeter.

We can determine the power lost by the ice using the recipe:

Q_ice = m_ice * L_f

where m_ice is the mass of the ice and L_f is the force of blend of water, which is 333 J/g.

Q_ice = (10.0 g) * (333 J/g) = 3330 J

We can sort out the force obtained by the water using the condition:

Q_water = m_water * c * (T_f - T_i)

where m_water is the mass of the water, c is the specific power breaking point of water, which is 4.184 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.

Q_water = (300.0 g) * (4.184 J/g°C) * (18.0°C - T_i)

We can figure the force obtained by the calorimeter using the recipe:

Q_calorimeter = m_calorimeter * c_calorimeter * (T_f - T_i)

where m_calorimeter is the mass of the calorimeter, which is 200.0 g, c_calorimeter is the specific force breaking point of copper, which is 0.385 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.

Q_calorimeter = (200.0 g) * (0.385 J/g°C) * (18.0°C - T_i)

Subbing these circumstances into the norm of conservation of energy, we get:

m_ice * L_f = m_water * c * (T_f - T_i) + m_calorimeter * c_calorimeter * (T_f - T_i)

Tending to for T_i, we get:

T_i = T_f - [(m_ice * L_f)/(m_water * c + m_calorimeter * c_calorimeter)]

T_i = 18.0°C - [(10.0 g) * (333 J/g)/(300.0 g * 4.184 J/g°C + 200.0 g * 0.385 J/g°C)]

T_i = 2.68°C

As needs be, the basic ordinary temperature of the water and copper was 2.68°C (conveyed to three immense figures).

To learn more about temperature, refer:

https://brainly.com/question/31909880

#SPJ1

A) The tangential (linear) velocity of each shape is:

For the ring: v = rω = 2.41 m/s.

For the sphere: v = rω = 1.57 m/s.

For the solid cylinder: v = rω = 2.41 m/s.

B) The linear acceleration of each shape is:

For the ring: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.191 m/s^2.

For the sphere: α = 2gsinθ/(5r(1 + 0.3)) = 1.176 m/s^2.

For the solid cylinder: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.228 m/s^2.

C) The solid cylinder has the greatest moment of inertia.

D) The time taken for each shape to reach the bottom of the slope is:

For the ring: t = 0.576 s.

For the sphere: t = 0.197 s.

For the solid cylinder: t = 0.576 s.

E) The sphere will reach the bottom of the slope first, followed by the ring and the solid cylinder.

Answer:

Explanation:

que ricos puntitos

The Kinetic energy of the car with a mass of 80 grams is 0.40 joules

From the graph given, we can see that the as the mass increase, the kinetic energy also increase. Thus, we can say that the kinetic energy and mass of the car are in direct proportionality.

Now, we shall obtain the velocity of the car. Details below:

KE = ½mv²

0.1 = ½ × 0.02 × v²

0.1 = 0.01 × v²

Divide both side by 0.01

v² = 0.1 / 0.01

Take the square root of both side

v = √(0.1 / 0.01)

v = 3.16 m/s

Finally, we shall determine the kinetic energy of the car of mass 80 grams. Details below:

KE = ½mv²

KE = ½ × 0.08 × 3.16²

Kinetic energy = 0.40 joules

Learn more about kinetic energy:

https://brainly.com/question/25959744

#SPJ1

The final speed of the rocket is -11.8 km/s.

The final speed of the rocket is calculated by applying the principle of conservation of linear momentum.

m0v0 = mv + (m0 - m)ve

where;

The final speed of the rocket is calculated as;

200,000 kg  x 3.5 km/s = 20,000 kg x v + (200,000 kg - 20,000 kg) x 5.2 km/s

700,000 = 20,000v + 936,000

v = -236,000/20,000

v = -11.8 km/s

Learn more about final speed here: https://brainly.com/question/25905661

#SPJ1

The word that best completes the analogy Health-related fitness is to health as skill-related fitness is to is option C which is performance.

In health and fitness, performance refers to an individual's ability to carry out physical activities or exercises with efficiency and effectiveness, which are key components of skill-related fitness. Good performance in health and fitness can be measured by various parameters, such as strength, endurance, flexibility, balance, coordination, and speed. For example, a good performance in running can be measured by the ability to run a certain distance in a shorter time or maintaining a specific pace for a longer time. Similarly, a good performance in weightlifting can be measured by the ability to lift a certain weight with proper form and technique.

In general, good performance in health and fitness is associated with better overall physical health, reduced risk of chronic diseases, and improved quality of life.

Learn more about performance below.

https://brainly.com/question/27943755

#SPJ1

Living outside the Earth, on the Moon or Mars, is a future possibility with continued research.

The idea of living outside of Earth has been a subject of interest for many years. While it may seem like a daunting task, it is definitely possible. Advancements in technology have made it easier to explore space and even establish human settlements on other planets.

Living on the Moon or Mars would require creating sustainable ecosystems that provide food, water, and oxygen for the settlers. It would also require building living quarters that can withstand the harsh environmental conditions on these planets.

However, we are still a long way from achieving this goal, and it will likely take several decades or even centuries before we can establish a permanent human presence on another planet.

Nonetheless, with continued research and development, we may one day be able to call another planet our home.

More on the earth can be found here: https://brainly.com/question/31064851

#SPJ1

The steps assume that the mirrors and boxes are arranged in a simple, two-dimensional configuration.

The steps to be followed are;

Learn more on reflection of mirror here https://brainly.in/question/54972410

#SPJ1

The  best description on  the weather conditions at location  A and B is  :It is warmer at position A than at position B.

Therefore Option (D) is correct

Weather condition is  described as  the regional weather during a defined time period from one up to several weeks describing typical weather phenomena, such as a series of thunderstorm in hot summer, foggy month in autumn or other weather conditions which are typical for a specific region and/or season.

From the given image, a warm front is being shown. Here, the region comprising letter A is the warm zone and the region above the front comprising the letter B indicates a cold zone. The position A forms a low-pressure zone, so it is comparatively warmer than the position B.

Learn  more about Weather condition at:

https://brainly.com/question/29332171

#SPJ1

#complete question:

Which of the following statements best describes the weather conditions at positions A and B shown below?

A. It is raining at position A and clear at position B.

B. It is cloudy at position A and clear at position B.

C. It is cooler at position A than at position B.

D. It is warmer at position A than at position B.

Answer:

A  1.25 m²

Explanation:

Explanation:

arctan ( -7.55/7.14) =  - 46.6 degrees     ( or  313.4 degrees)

The velocity of sphere B is -1.475 m/s. Which is in opposite direction to the direction of sphere A.

Velocity is the rate of change of displacement.

To calculate the velocity of sphere B before collision, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the velocity of sphere B is -1.475 m/s.

Learn  more about velocity here: https://brainly.com/question/25749514

#SPJ1

Answer:

The two answers that are likely to be true are:

She will think of the results as an opportunity to find joy.

She will identify areas for self-development in her results.

By setting her mind on growth, Jackie is likely to approach the personality test with a positive and open mindset. This can lead to the following outcomes:

She will think of the results as an opportunity to find joy: Jackie may view the test results as a chance to discover aspects of her personality that bring her joy and satisfaction. She might focus on finding strengths and positive qualities that can contribute to her personal and professional growth.

She will identify areas for self-development in her results: Rather than viewing the test results as fixed labels or limitations, Jackie is likely to see them as valuable feedback for self-improvement. She may actively seek out areas where she can further develop her skills, knowledge, and personality traits to enhance her personal and career growth.

It's important to note that the other options listed in the question (1. She will score high in the areas she chooses to and 2. She will respond based on what's best in her desired career path) are not directly related to having a growth mindset. They suggest a more biased or strategic approach to the test, which may not align with the concept of growth and self-improvement.

Answer:

Car

Explanation:

Based on Newton 2nd law, energy are conserves. Meaning that if the Force is equal, the car with lower mass must be travelling in a much greater acceleration.

F = m.a

where,

a = Δv/Δt

When talking about energy, there are 2 factor: mass and velocity.

The change of Kinetic energy experience by the car is

ΔEk = 1/2.m.Δv²

Eventhough the car has smaller mass, notice that the velocity will be squared. In this case the velocity is the a more dominant factor. It means that energy absorbed by the car is much larger.

The true statements regarding VDGS Systems are you must power on and check the system before arrival and a qualified agent must man the Emergency stop.

VDGS stands for Visual Docking Guidance System. It is a technology used in airports to assist pilots in parking their aircraft at the gate by providing visual cues and guidance through the use of lights and/or displays.

The following statements regarding VDGS Systems are true:

Learn more on VDGS here https://brainly.com/question/26507705

#SPJ1