A 1.00 l solution contains 3.50×10-4 m cu(no3)2 and 1.75×10-3 m ethylenediamine (en). the kf for cu(en)22 is 1.00×1020. what is the concentration of cu2 (aq) in the solution?

25 (b)  106 g of Na2CO3 is needed to produce 22.4 dm³ of CO2 at STP in this reaction.

Volume occupied by one mole of a substance at a given temperature and pressure is known as molar volume.

Balanced equation shows that 1 mole of Na2CO3 produces 1 mole of CO2. Therefore, the number of moles of CO2 produced in 22.4 dm^3 of gas at STP is:

n = V/VM = 22.4/22.4 = 1 mol

So we need 1 mole of Na2CO3 to produce this amount of CO2.

Molar mass of Na2CO3 is:

2Na + C + 3O = (2x23) + 12 + (3x16) = 106 g/mol

Therefore, mass of Na2CO3 needed is:

As mass = n x molar mass = 1 mol x 106 g/mol = 106 g

So, 106 g of Na2CO3 is needed to produce 22.4 dm³ of CO2 at STP in this reaction.

To know more about molar volume, refer

https://brainly.com/question/11676583

#SPJ1

The compounds HF, [tex]H_2SO_4[/tex], and HBr are strong acids in aqueous solution.

Strong acids are molecules that can easily donate protons to water molecules in aqueous solution. This dissociation of protons from the acid molecules creates a solution that is highly acidic, often with a pH of less than 7.Hydrofluoric acid (HF), sulfuric acid ([tex]H_2SO_4[/tex]), and hydrobromic acid (HBr) are all strong acids in aqueous solution. This is because the conjugate bases of these acids are generally much less stable than the acids themselves, which makes them more likely to dissociate and donate protons in water.The higher the difference in stability, the more likely it is that the acid will dissociate in water and the stronger the acid will be.

learn more about aqueous solution Refer:brainly.com/question/26856926

#SPJ1

Lactate concentration in the cuvette for LDH assay can not be determined as this value would need to be specified in the experimental setup. The value should be known to assess lactate dehydrogenase activity.

The lactate concentration in the cuvette can be calculated using the Beer-Lambert law, which relates the absorbance of a sample to its concentration. The equation is A = εlc, where A is the absorbance, ε is the molar absorptivity coefficient, l is the path length of the cuvette (usually 1 cm), and c is the concentration in moles per liter.

Knowing the lactate concentration in the cuvette is important because it allows us to determine the activity of lactate dehydrogenase (LDH), the enzyme being assayed. LDH catalyzes the conversion of lactate to pyruvate, and the rate of this reaction depends on the concentration of lactate. By measuring the change in absorbance over time, we can calculate the initial rate of the reaction and use this information to determine the activity of LDH.

Learn more about LDH here.https://brainly.com/question/14663795

#SPJ11

When carbonyl compounds are reduced with a reagent such as LiAlH₄ or NaBH₄ and  new stereogenic center is formed, chemical change will lead to form products that form a racemic mixture of two enantiomers with alcohol as its composition.

A Chemical change is defined as a change which occurs when a substance combines with another substance to form a new substance as product. Also, when a substance decomposes to give new substances it is also considered as a chemical change.

The reduction of an unsymmetrical ketone with the reducing agents LiAlH4 or NaBH4 gives a pair of stereoisomers. This is  because the hydride ion can attack from either face of a planar carbonyl group. And , If no other chiral center is present, then the product is a racemic mixture of two enantiomers. The carbonyl group is converted to alcohol in the end product of such reactions.

To know more about carbonyl compounds here

https://brainly.com/question/24351517

#SPJ4

The temperature of a given volume of water changes as heat is added at a consistent pace, as shown by the water heating curve. The temperature of the water does not vary throughout a phase shift, creating a plateau on the graph.

When a substance is heated to a material-specific phase-change temperature, the phase transition from solid to liquid occurs immediately.

Water has a specific heat capacity of 4.18 J/g/°C. The amount of heat, or Q, is what we want to know. To do this, we would apply the formula Q = m•C•T. Knowing the m and C allows for the calculation of the T.

To know more about temperature visit:-

brainly.com/question/29072206

#SPJ1

the mass number of the mystery element is 14. The mass number of an atom is the total number of protons and neutrons in its nucleus.

The mass number of an atom is the sum of the number of protons and neutrons in its nucleus. This number represents the total number of particles (protons and neutrons) in the atom's nucleus.

In the case of the mystery element, it has 7 protons and 7 neutrons, which means its mass number is 14. The number of electrons in an atom is equal to the number of protons in its nucleus, which in this case is also 7.

The mass number is an important property of an atom as it determines the atom's atomic weight, which is the average weight of all the isotopes of an element. Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei, and therefore have different mass numbers. The atomic weight is calculated by taking the average of the mass numbers of all the isotopes of an element, weighted by their relative abundance.

Understanding the mass number is essential in many areas of science, including chemistry and nuclear physics, as it helps to describe the structure, stability, and behavior of atoms and their interactions with other atoms.

To know more about mass number, visit: brainly.com/question/4408975

#SPJ4

The compound [18F]2-fluoro-2-deoxyglucose is an imaging agent used to detect tumors.

[18F]2-fluoro-2-deoxyglucose is a radiolabeled glucose analogue that is used in positron emission tomography (PET) imaging. The compound is taken up by cells in the body and accumulates in tissues with high glucose metabolism, such as tumors.

The radiolabeled fluorine-18 emits positrons, which interact with electrons in the body to produce gamma rays that can be detected by a PET scanner. The signal from the gamma rays is then used to produce images of the tissues that have taken up the compound.

The use of [18F]2-fluoro-2-deoxyglucose in PET imaging has become an important tool for the detection and staging of tumors, as well as for monitoring the response to treatment. It is particularly useful for imaging tumors that are difficult to detect with other imaging techniques, such as small or metastatic tumors.

To know more about detect tumors, refer here:

https://brainly.com/question/14584081#

#SPJ11

Sulfur has a negative charge of 2 because it has gained two electrons to fulfill its octet rule.

Sulfur (S) has a negative charge of 2 because it has gained two electrons to fulfill its octet rule, which is a guideline in chemistry stating that atoms tend to gain, lose or share electrons to achieve a stable electron configuration of eight valence electrons (except for hydrogen and helium, which need only two electrons).

Sulfur is in Group 6 of the periodic table, which means it has six valence electrons. In order to fulfill the octet rule and achieve a stable electron configuration, it needs to gain two more electrons. When sulfur gains two electrons, it forms a stable S2- ion, which has a total of eight valence electrons.

The negative charge on the S2- ion arises because electrons are negatively charged particles. When sulfur gains two electrons, the total negative charge of the ion is increased by the charge of the two electrons, which is -2. Therefore, the S2- ion has a net charge of -2.

This makes sulfur an anion, which is a negatively charged ion. Anions are formed by gaining electrons, which leads to an excess of negative charge. In contrast, cations are positively charged ions, which are formed by losing electrons, resulting in an excess of positive charge.

More on sulfur can be found here: https://brainly.com/question/1478186

#SPJ1

When X, which contains both lactone and an acetal, is treated with the reagents NaOH, H2O, a neutral compound is formed. This product is known as a hemiacetal.

When an acetal is formed, a hemiacetal intermediate is produced. Hemiacetals, like acetals, are organic compounds. When the hemiacetal is treated with an alcohol, it forms an acetal. As a result, acetals are formed by a reaction that is similar to that of hemiacetals. Nucleophilic addition reaction is the reaction that occurs between a lactone and a hydroxide ion to create a lactone.

The reaction mechanism is nucleophilic addition followed by elimination. It is the same reaction mechanism as that of nucleophilic addition to a carbonyl group of a ketone or an aldehyde. Here is a neutral compound formed when X, containing both lactone and an acetal, is treated with NaOH and H2O:

OH– C4H9O – CHO2+ (lactone) ⟶  H3C–C(OH)–O– C4H9O– CHO + Na+ (counterion)

Thus, a hemiacetal is formed when X, which contains both lactone and acetal, is treated with NaOH and H2O.

To know more about hemiacetal, refer here:

https://brainly.com/question/28030326#

#SPJ11

Oxygen, abbreviated O2, is the limiting reactant in this scenario. Limiting Reactor: The fire equation is O2 + Fuel = CO2 + H2O

When a pile of leaves is set on fire and the fire is covered with a fire blanket to put it out, the blanket restricts the amount of oxygen the fire can access, which lowers the amount of oxygen present and lowers the amount of CO2 and H2O that can be created.

By dividing the volume of each solution by its molarity, you can get the number of moles of each reactant. By dividing the number of moles of each reactant by its stoichiometric coefficient in the balanced chemical equation, you may determine which reactant is the limiting one.

To know more about limiting reactant visit:-

brainly.com/question/14225536

#SPJ1

If a company like Apple were to learn about an environmental mining disaster at a copper mine from which they acquire materials, they should respond by taking immediate action to address the situation.

Firstly, the company should investigate the impact of the disaster on the local environment and the communities living in the area. They should work with independent experts and local stakeholders to understand the extent of the damage and the potential long-term consequences. This information will be crucial in determining the appropriate response.

Secondly, the company should review their supply chain and identify any potential risks or issues related to the mining operations. They should engage with their suppliers and work together to address the situation and ensure that responsible mining practices are being followed.

Learn more about environmental impact:https://brainly.com/question/29638468

#SPJ1

Answer:

Water and salt can be separated through the process of distillation or evaporation. The water is boiled till it evaporates into vapor and leaves salt behind as a solid. The boiling point of water is lower compared to the boiling point of salt.

Explanation:

The method of separating salt and water from their solutions​ is called evaporation or condensation

Here are the steps:

1. Pour the saltwater solution into a heat-resistant container, such as a glass or metal beaker.

2. Place the container on a heat source, such as a hot plate or stove.

3. Heat the solution until the water begins to evaporate. The salt will remain in the container as the water turns into steam.

4. Once all the water has evaporated, turn off the heat source and allow the container to cool.

5. As the steam cools, it will condense back into liquid form, leaving the salt behind.

6. Carefully remove the salt from the container using a utensil, such as a spatula or a spoon.

7. Discard the remaining water, or save it for other uses.

To know more about evaporation or condensation,

https://brainly.com/question/5019199?referrer=searchResults

https://brainly.com/question/18200686?referrer=searchResults

A pure substance that cannot be broken down into simpler substances is water.

A pure substance is a substance made up of one type of atom or molecule that cannot be broken down into simpler substances. This means that the substance has a fixed chemical composition that does not vary from sample to sample. Examples of pure substances include water, carbon dioxide, and salt.

The pure substance that cannot be broken down into simpler substances is called an element. An element is a substance that is made up of only one type of atom. Examples of elements include hydrogen, oxygen, and iron. Each element has a unique set of chemical and physical properties that distinguish it from other elements.

Elements are organized into the periodic table based on their atomic structure and properties. Elements can combine to form compounds, which are made up of two or more different elements chemically bonded together. Compounds can be broken down into their constituent elements by chemical means, but elements cannot be broken down into simpler substances.

Therefore, elements are considered pure substances that cannot be broken down any further.

To know more about pure substance refer here:

https://brainly.com/question/24462192#

#SPJ11

Reverend Thomas Robert Malthus initially put forth the Malthusian hypothesis of population growth in 1798, which predicts that an unrestrained population would surpass its food supply.

According to the hypothesis, sickness, starvation, war, and other calamities will eventually ensue when the food supply cannot keep up with the increase in the human population. Malthus established the Statistical Society of London and was a well-known statistician and political economist.

Thomas Robert Malthus famously prophesied in 1798 that if human population expansion outpaced food production, short-term advances in living standards would inevitably be undermined and pull living standards back towards subsistence.

To know more about hypothesis visit:-

https://brainly.com/question/16362295

#SPJ1

The statement that tungsten-halogen lamps operate at very high temperatures (high enough to literally fry eggs) and should not be used in fixtures that have paper- or cellulose-lined sockets is TRUE.

A tungsten halogen lamp is a type of incandescent lamp that contains a small amount of halogen gas such as iodine or bromine inside the bulb, which reacts with the tungsten filament when the bulb is turned on. Tungsten halogen lamps are widely used in stage lighting, film projection, automobile headlights, and other applications that require high-intensity lighting.

They generate a lot of heat when in operation, reaching temperatures high enough to cook an egg. The high operating temperature of tungsten halogen lamps can melt paper or cellulose-lined sockets, posing a potential fire hazard.

Tungsten halogen lamps should not be used in fixtures with paper- or cellulose-lined sockets because the heat generated by the lamp can melt the lining and cause the fixture to catch fire. Instead, fixtures that use tungsten halogen lamps should be designed to withstand the high temperatures they generate.

To know more about tungsten-halogen lamps, refer here:

https://brainly.com/question/2625320#

#SPJ11

Explanation:

In the formation of an ionic crystal, several enthalpy changes are involved. These include:

Lattice energy: The energy released when gaseous ions come together to form a solid ionic compound.

Ionization energy: The energy required to remove an electron from an atom or ion in the gas phase.

Electron affinity: The energy released when an electron is added to an atom or ion in the gas phase.

Hydration energy: The energy released when an ion is surrounded by water molecules in solution.

Heat of solution: The energy absorbed or released when a solute dissolves in a solvent.

Overall, the formation of an ionic crystal involves a complex interplay of these different enthalpy changes. The strength of the forces holding the ions together in the crystal lattice depends on the balance between these different energy contributions.

1. The volume of the 12.0 g of methane, CH₄ is 16.8 L

2. The new celsius temperature of the gas is -153.8 °C

3i. The partial pressure for CO₂ is 0.575 atm

3ii. The partial pressure for O₂ is 0.2875 atm

3iii. The partial pressure for water is 0.2875 atm

First, we shall obtain the mole of the gas. This shown below:

Mole = mass / molar mass

Mole of methane, CH₄ = 12 / 16

Mole of methane, CH₄ = 0.75 mole

Finally, we shall determine the volume of the methane, CH₄

From ideal gas equation,

1 mole of methane, CH₄ = 22.4 L

Therefore,

0.75 mole of methane, CH₄ = 0.75 × 22.4

0.75 mole of methane, CH₄ = 16.8 L

Thus, the volume of methane, CH₄ is 16.8 L

The new temperature of the gas can be obtained as follow:

Charles' law equation is given as follow:

V₁ / T₁ = V₂ / T₂

Inputting the variables, we have

10 / 298 = 4 / T₂

Cross multiply

10 × T₂ = 298 × 4

Divide both side by 10

T₂ = (298 × 4) / 10

T₂ = 119.2 K

Subtract 273 to obtain answer in °C

T₂ = 119.2 - 273 K

T₂ = -153.8 °C

Thus, the new temperature is -153.8 °C

i. Partial pressure for CO₂ can be obtained as follow:

Partial pressure of CO₂ = (percentage of CO₂ / total percent) × total pressure

Partial pressure of CO₂ = (50 / 100) × 1.15

Partial pressure of CO₂ = 0.575 atm

ii. Partial pressure for O₂ can be obtained as follow:

Partial pressure of O₂ = (percentage of O₂ / total percent) × total pressure

Partial pressure of CO₂ = (25 / 100) × 1.15

Partial pressure of O₂ = 0.2875 atm

iii. Partial pressure for water can be obtained as follow:

Total pressure = Partial pressure of CO₂ + partial pressure of O₂ + partial pressure of water

1.15 = 0.575 + 0.2875 + partial pressure of water

1.15 = 0.8625 + partial pressure of water

Collect like terms

Partial pressure of water = 1.15 - 0.8625

Partial pressure of water = 0.2875 atm

Learn more about partial pressure:

https://brainly.com/question/15577259

#SPJ1

As we travel down in the group, the halogens' boiling points rise. The resultant molecules may have a single carbon atom or as many as a million.

The attractive force grows as the number of electrons decreases in the group, and more energy is needed to counteract these forces, raising the boiling point.

Fluorine's boiling point of -188°C, Chlorine's of -34.6°C, Bromine's of 58.8°C, and iodine's of 184°C, as well as the trend in melting temperatures, are explained by the strengthening intermolecular interactions that bind the halogen molecules together.

To know more about halogens visit:-

brainly.com/question/11156152

#SPJ1

The answer is it will take longer to dissolve the solute in the solution. Add the solute slowly. Stir or agitate the solution. Increase the atmospheric pressure. Add the solute in large chunks. If a solute is added slowly, it will take longer to dissolve in the solution.

Stirring or agitating the solution will improve the rate at which the solute dissolves in the solution because it helps to break up the solute particles into smaller pieces, which increases the solute's contact with the solvent. Increasing the atmospheric pressure has the potential to improve the rate of dissolving a solid in a solution. The atmospheric pressure is the weight of the air over the surface of the solution. The higher the pressure, the more gas molecules are present in the atmosphere, and the more they will be compressed against the surface of the solution. The rate of dissolving of a solid in a solution can be slowed down by adding the solute in large chunks. As a result, it will take longer to dissolve the solute in the solution.

for more such question on atmospheric pressure

https://brainly.com/question/19587559

#SPJ11

In the Fischer esterification reaction, sulfuric acid acts as a catalyst that facilitates the reaction between a carboxylic acid and an alcohol to form an ester. The sulfuric acid protonates the carboxylic acid, making it more reactive towards the alcohol.

The acid also facilitates the removal of water from the reaction mixture, which drives the equilibrium towards the formation of the ester. This results in a higher yield of the ester product. The Dean-Stark trap is a piece of equipment used in the Fischer esterification reaction to remove water from the reaction mixture. It is a special type of condenser that collects the water formed during the reaction and allows it to separate from the organic layer.

To know more about Fischer esterification, here

brainly.com/question/31041190

#SPJ4

The minimum amount of energy required to initiate a chemical reaction is known as the activation energy.

It is the amount of energy needed to break existing chemical bonds and create new ones, enabling the reaction to take place. The activation energy required for a reaction is dependent on the nature of the reacting species and the pathway taken for the reaction to occur. In most cases, the greater the activation energy required, the slower the reaction rate.

Activation energy can be provided in different ways, such as from thermal energy, from an electric spark, from light, or  the presence of a catalyst. Catalysts can speed up reactions by lowering the amount of activation energy required for the reaction to occur. Activation energy is also a key factor in controlling the rate of reactions since reactions can occur when the energy of the reactants reaches or exceeds the activation energy of the reaction.

Know more about activation energy here:

https://brainly.com/question/1380484

#SPJ11      

the given statement is true. The construction of B12 depends on a corrin ring, which is like the porphyrin ring tracked down in heme. The focal metal particle is cobalt.

As secluded as an air-stable strong and accessible monetarily, cobalt in vitamin B12 (cyanocobalamin and other vitamers) is available in its +3 oxidation state.

Cyanocobalamin is a cobalt-containing coordination compound produced by digestive organisms and a characteristic water-solvent nutrient of the B-complex family that should consolidate with Inborn Elements for retention by the digestive system. Cyanocobalamin is important for hematopoiesis, neural metabolism, DNA and RNA creation, and starch, fat, and protein metabolism. B12 works on iron capabilities in the metabolic cycle and helps folic corrosive in choline union. B12 metabolism is interconnected with that of folic corrosive. Lack of vitamin B12 causes noxious iron deficiency, megaloblastic weakness, and neurologic injuries.

to know more about Vitamin B12 click here:

https://brainly.com/question/22468338

#SPJ4

The haloform test does not proceed more quickly as more of the protons are replaced.

This is because the haloform test is not influenced by the presence of protons. The haloform reaction is a well-known test for carbonyl compounds that react with hypochlorite (NaClO) in the presence of a base (OH) to produce haloforms. The haloform reaction is a typical aldehydic and ketonic carbonyl group reaction that yields a haloform (e.g., CHX3, where X is halogen) and a carboxylate. The haloform reaction proceeds with a carbonyl group as the starting material. The alpha hydrogen on the carbonyl group is removed by base and oxidized by hypochlorite to form the haloform.

When the reaction occurs, three alpha hydrogen atoms are replaced by halogen atoms, resulting in the formation of haloform. The presence of protons in a molecule does not speed up the reaction rate of the haloform reaction. The haloform test reaction rate is influenced by the concentration of NaOH (a base) and hypochlorite (NaClO). As a result, the haloform test does not proceed more quickly as more protons are replaced.

For more questions on haloform test

https://brainly.com/question/10710179

#SPJ11

The buoyant force acting on the Lucia before the torpedo attack was the upward force on the submarine due to the water it displaces when submerged.

This force is determined by the submarine's volume and the density of the water it is submerged in. This force essentially counteracts the downward force of gravity, allowing the Lucia to remain at a constant depth underwater.The buoyant force acting on the Lucia before the torpedo attack was the force of the water pushing up on the hull of the ship, which counteracted the force of gravity pulling it down. This buoyancy kept the ship afloat, allowing it to remain afloat even when it was loaded with cargo and crew.

learn more about buoyant force Refer:brainly.com/question/21990136

#SPJ1

complete question:Describe the buoyant force acting on the Lucia before the torpedo attack.

The empirical formula of the compound is: CH4.

To determine the empirical formula and/or molecular formula of a compound from percent composition or mass data, follow the steps below:

Empirical Formula:

Molecular Formula:

Example: What is the empirical formula of a compound that contains 14.3 g of carbon and 4.8 g of hydrogen?

To know more about "Empirical formula" & "Molecular formula" refer here:

https://brainly.com/question/13058832#

#SPJ11

Answer: 19.2 mols

Explanation:

3*6.40 mol so 19.2 mols are produced. This is because the ratio of C3H8 to CO2 is 1 to 3 so there are three times as many moles of CO2 as C3H8.

The coal cost of $90/ton with an intensity content of 7000 BTU for every pound is D: $6.42/MMBtu.

The recipe to compute MMBtu from tons is as per the following -

Cost per mmbtu = cost per ton × 500/BTU per pound

Keep the qualities in the equation to find the cost per MMBtu

Cost per mmbtu = (90×500)/7000

Performing augmentation in the numerator on Right Hand Side of the situation

Cost per mmbtu = 45000/7000

Performing division on Right Hand Side of the situation to find the cost per MMBtu for coal

Cost per mmbtu = $6.42/mmbtu

Accordingly, the right choice is D: $6.42/MMBtu.

to know more about the coal click here:

brainly.com/question/22647554

#SPJ4

The heat does it take to increase the temperature of 2.90 moles of a diatomic gas by an amount 25.0 K if the gas is held at the constant volume is 1506.9 J.

The number of moles of the gas = 2.90 moles

The change in the temperature of the gas ΔT = 25 K

For the constant volume process , the expression is as :

Q = n CΔT

For the diatomic ideal gas , the specific heat capacity at the constant volume is : C = 5/2 R

Q = 2.90 × 5/2 × 8.314 × 25

Q = 1506.9 J

Thus, the heat need it take to increase the temperature is 1506.9 J.

To learn more about diatomic gas here

https://brainly.com/question/21119359

#SPJ4