A 22 kg child is riding a 5.8 kg bike with a velocity of 4.5 m/s to the northwest. A) what is the total momentum of the child and the bike together? Answer in units of kg • m/s.
B) What is the momentum of the child? Answer in units of kg • m/s.

Answer: Below are the answers

Explanation:

       Displacement:    3      5                0

    2. Distance :      4    4+3 = 7       4+3+5 = 12  

       Displacement :       4        5              0

The kinetic energy lost in this collision is 1.07 J. The negative sign indicates that the kinetic energy is lost during the collision.

Mass of 1st object = 2 kg, Velocity of 1st object = 7 m/s. Mass of 2nd object = 5 kg, Velocity of 2nd object = 3 m/s. We need to calculate the kinetic energy lost in this collision. As both the objects are moving in the same direction, we can apply the conservation of momentum equation for this type of collisions. Let us apply the equation for conservation of momentum before and after the collision:

Initial momentum = m1v1 + m2v2= (2 kg) (7 m/s) + (5 kg) (3 m/s)= 14 kg m/s + 15 kg m/s= 29 kg m/s. Final momentum = (m1 + m2) vf= (2 kg + 5 kg) vf= 7 kg vf. According to the conservation of momentum equation, Initial momentum = Final momentum29 kg m/s = 7 kg vfvf = 4.143 m/s. Now, we can apply the equation for kinetic energy to find out how much kinetic energy is lost in this collision.

Initial kinetic energy of the system = (1/2) m1v12 + (1/2) m2v22= (1/2) (2 kg) (7 m/s)2 + (1/2) (5 kg) (3 m/s)2= 49 J + 22.5 J= 71.5 J. Final kinetic energy of the system = (1/2) (m1 + m2) vf2= (1/2) (7 kg) (4.143 m/s)2= 72.57 J. Therefore, the kinetic energy lost in this collision is: Kinetic energy lost = Initial kinetic energy - Final kinetic energy= 71.5 J - 72.57 J= -1.07 J

To know more about collision, refer here:

https://brainly.com/question/13138178#

#SPJ11

When light travels from one medium to another, its speed, direction, and wavelength can change, while its frequency remains constant. These changes are due to differences in the refractive indices of the two media.

As light travels from one medium to another, several of its properties change, including its speed, direction, and wavelength. The speed of light changes because the refractive index of each medium is different, which alters the velocity of the wave. The direction of the light may also change, a phenomenon known as refraction, as it enters a medium with a different refractive index. The amount of refraction depends on the angle of incidence, the angle between the incoming light and the normal line to the surface of the medium. Finally, the wavelength of the light may also change due to the refractive index of the medium, a phenomenon known as dispersion. This results in the separation of white light into its component colors when it passes through a prism or other refracting medium.

learn more about wavelength here:

https://brainly.com/question/13676179

#SPJ4

In this case, the series RL circuit is fairly efficient, as the power factor is close to 1.

The given series RL circuit contains a resistor of 50 Ω and an inductor of 10 mH. It is connected to a 100 V (peak) voltage source. The frequency of the input is 250 Hz. We need to find the power factor of this circuit.

The first step is to find the impedance (Z) of the circuit. The impedance of a series RL circuit is given by:

Z = √(R² + Xl²)

Where R is the resistance and Xl is the inductive reactance.

The formula for inductive reactance is:

Xl = 2πfL

Where f is the frequency and L is the inductance.

Substituting the given values, we get:

Xl = 2π × 250 × [tex]10^{-3}[/tex] = 1.57 ΩZ = √(50² + 1.57²) = 50.18 Ω

Now,

The power factor (PF) of a circuit is given by:

PF = cosφ

Where φ is the phase angle between the voltage and current.

Since this is a series RL circuit, the current lags the voltage by an angle φ, which is given by:

tanφ = Xl/Rφ = [tex]tan^{-1}[/tex](Xl/R)φ = [tex]tan^{-1}[/tex](1.57/50) = 1.79°

The power factor is:

PF = cos(1.79°) = 0.9985 (approx)

Therefore, the power factor of the given series RL circuit is approximately 0.9985.

For more such questions on Power factor.

https://brainly.com/question/31201010#

#SPJ11

The reason why we calculate the difference between segments rather than simply reporting the point-to-twitch velocities is that the point-to-twitch velocities change from one segment to the next due to the effect of inertial forces.

A segment is part of a trajectory between two key points of interest. Point-to-twitch is a measure of the speed of movement between successive key positions. Velocity is the rate at which an object changes its position. It is a vector quantity that has a magnitude (speed) and a direction. It is also known as the rate of change of displacement. We need to calculate the difference between segments because the movement speed is not constant during a movement. The point-to-twitch velocities change from one segment to the next because of the impact of inertial forces. The inertial forces play a crucial role in influencing the velocity of the system. Inertial forces act in a direction opposite to the acceleration of the system.

Learn more about velocities at:

https://brainly.com/question/4931057

#SPJ11

Photovoltaic cells use solar energy to produce electricity. The correct option is D.

Photovoltaic cells convert sunlight into electrical energy by converting the energy of photons, which are particles of light. The photovoltaic cell works by separating electric charges in a solid state using the photoelectric effect.

The electric field inside the cell causes the separated charges to flow through the circuit, providing electrical power to the load. Silicon is the most widely utilized material for solar cells.

The photovoltaic effect was initially observed by Edmond Becquerel in 1839, and it was first exploited in the 1950s when photovoltaic silicon was made into semiconductors, which was a technology that had already been in use in the semiconductor industry for over a decade.

In conclusion, solar energy is a renewable and clean source of energy that is produced by photovoltaic cells that convert sunlight into electrical energy using the photovoltaic effect.

To know more about solar energy refer here:

https://brainly.com/question/29751882#

#SPJ11

The focal length of the convex spherical mirror is 18.4 cm. The magnification is approximately equal to -0.41.

The distance of the object is 29.5 cm from the convex mirror and the image distance is 12.0 cm from the mirror.

The given mirror is a convex spherical mirror which means that the radius of the curvature of the mirror is positive. Therefore, we can use the mirror formula to calculate the focal length of the mirror.

The mirror formula is given by the equation:

1/f = 1/u + 1/v

Here,

f is the focal length of the mirror

u is the distance of the object from the mirror

v is the distance of the image from the mirror

The magnification of the mirror is given by the equation:

magnification, m = v/u

Now,

substituting the values given in the question in the above equations,

we get;

1/f = 1/29.5 + 1/12

Simplifying this equation gives, f ≈ 18.4 cm

Therefore, the focal length of the convex spherical mirror is 18.4 cm.

Now, the magnification of the mirror is given by the equation,

m = v/u = -12/29.5

Thus, the magnification is approximately equal to -0.41.

To know more about Focal length refer here:

https://brainly.com/question/16188698#

#SPJ11

The charge on A is +10.24x10-19 Coulombs and the charge on B is 39.36x10-19 Coulombs.

Describe Coulomb's Law. Coulomb's law states that the force of attraction or repulsion between two charged bodies is inversely proportional to the square of the distance between them and directly proportional to the product of their charges.

Charge of an electron is =0.00000000000000000016

                                            =10000000000000000000016

                                            =102016

                                            =10201.6×10

                                            =10191.6

                                            =1.6×10−19

so the charge on A is +6.4x 1.6x10-19 , 10.24x10-19Coulombs

similarly,

The charge on B is 24,6x1.6x10-19 , 39.36x10-19 Coulombs

To know more about Coulomb's Law, click the below link

https://brainly.com/question/506926

#SPJ4

The potential difference between the plates after the battery is disconnected is equivalent to the potential difference produced by the charge separated by the capacitor.

This is given by the formula; V = Q/C

Where V is the potential difference, Q is the charge stored by the capacitor, and C is the capacitance of the capacitor. Since the battery is removed after charging, the capacitor would still retain its charge, which is calculated using the capacitance and potential difference given in the question.

IQ = VCQ = (12.0 V) (4.50 x 10-7 F)Q = 5.40 x 10-6 C

Substituting the value of charge in the formula, the potential difference between the plates after the battery is disconnected is given by;

V = Q/CV = 5.40 x 10-6 C / 4.50 x 10-7 FV = 12.0 Vb.

Potential Difference After Sheet of Teflon is Inserted: If a sheet of Teflon is inserted between the plates of the capacitor, the capacitance of the capacitor would change. This is because the dielectric constant of Teflon is greater than that of air or vacuum, which increases the capacitance.

The formula for calculating capacitance with a dielectric inserted is; C = ε0A/

where C is the capacitance, ε0 is the permittivity of free space, A is the area of the capacitor plates, and d is the distance between the plates.

With Teflon inserted, the new capacitance of the capacitor is given by; CT = Kε0A/where K is the dielectric constant of Teflon, which is given as 2.10 for Teflon. The new capacitance is therefore; CT = (2.10) (8.85 x 10-12 F/m) (0.400 m2) / 1.00 x 10-3 mCT = 7.46 x 10-11 F

The potential difference after the sheet of Teflon is inserted is given by the formula;V = Q/CT

Where V is the potential difference, Q is the charge stored by the capacitor, and CT is the new capacitance of the capacitor with Teflon inserted.

The charge stored in the capacitor would remain constant, which is 5.40 x 10-6 C from part a of the question. Substituting the values in the formula gives;

V = 5.40 x 10-6 C / 7.46 x 10-11 FV = 7245.56

The potential difference between the plates after the sheet of Teflon is inserted is 7245.56 V.

#SPJ11

To learn more about capacitor:  https://brainly.com/question/29301875

To solve this problem, you can use the equations of motion for rotational motion under constant acceleration:

ωf = ωi + αt --(1)

θ = ωit + 0.5αt^2 --(2)

where ωi is the initial angular velocity, ωf is the final angular velocity, α is the angular acceleration, t is the time elapsed, and θ is the angular displacement.

Using equation (1), we can find the angular acceleration of the wheel:

α = (ωf - ωi)/t

= (30.0 rad/s - 10.0 rad/s)/20.0 s

= 1.0 rad/s^2

Using equation (2), we can find the total angular displacement of the wheel during the 20.0 seconds:

θ = ωit + 0.5αt^2

= 10.0 rad/s × 20.0 s + 0.5 × 1.0 rad/s^2 × (20.0 s)^2

= 400.0 rad

To find the time at which the wheel has undergone half of this angular displacement, we can use equation (2) again:

θ/2 = ωit + 0.5αt^2

Rearranging and solving for t, we get:

t = [(-ωi) ± sqrt(ωi^2 + 2αθ)]/α

Since we are looking for a positive time, we take the positive root:

t = [(-10.0 rad/s) ± sqrt((10.0 rad/s)^2 + 2 × 1.0 rad/s^2 × 400.0 rad)]/1.0 rad/s^2

≈ 12.4 s

Therefore, the answer is B, 12.4 s.

Kinetic energy of a gas molecule depends on temperature. The correct answer is option C.

The kinetic energy of a molecule is the energy that it possesses due to its motion. This kinetic energy depends on temperature. Hence, the correct option is C: Temperature.

When we raise the temperature of a gas, we increase the kinetic energy of the gas molecules. When the temperature of a gas increases, the gas molecules start moving with more speed. As a result, the average kinetic energy of the gas molecules increases.

Kinetic energy is the energy that is associated with the motion of an object. Kinetic energy is a scalar quantity, and it depends on the mass and speed of the object. The formula for kinetic energy is given by

K = 1/2mv²

Where

K represents the kinetic energy of the object,

m represents the mass of the object,

v represents the speed of the object.

Learn more about Kinetic energy here: https://brainly.com/question/8101588

#SPJ11

If the net force on a particle at some point in space is zero, its potential energy need not be zero at that point.

According to the law of energy conservation, a particle's mechanical energy is conserved, i.e., it is constant when there is no external force. So, the net force on a particle is zero when the potential energy is maximum or minimum at that point. This statement means that the particle's mechanical energy is the sum of its potential energy and kinetic energy, and it is constant.

To understand it better, let us consider an example of a block of mass m, which is sliding down a frictionless hill. Here, the particle has the highest potential energy at the top of the hill and zero potential energy at the bottom of the hill. According to the law of conservation of energy, the total mechanical energy of the block at the top of the hill is equal to the total mechanical energy of the block at the bottom of the hill.

So, if the net force on a particle at some point in space is zero, its potential energy need not be zero at that point. The potential energy can be either maximum or minimum, and the particle's mechanical energy is constant.

Note: The question is incomplete. The complete question probably is: If the net force on a particle at some point in space is zero, must its potential energy also be zero at that point? Explain.

Learn more about Potential energy:

https://brainly.com/question/24933254

#SPJ11

The dsDNA molecule with 200 nucleotides and 20% guanine would have a total of 240 hydrogen bonds.

In a double-stranded DNA molecule, the number of hydrogen bonds between complementary base pairs determines the stability of the molecule.

Guanine (G) pairs with cytosine (C), and adenine (A) pairs with thymine (T), with each base pair forming a specific number of hydrogen bonds.

The number of hydrogen bonds in a G-C base pair is three, while the number of hydrogen bonds in an A-T base pair is two.

Therefore, to determine the number of hydrogen bonds in a dsDNA molecule with 20% guanine, we first need to calculate the number of guanine-cytosine base pairs.

So out of the 200 nucleotides, 20% will be guanine and 20% will be cytosine, which means there will be 40% G-C base pairs.

The number of G-C base pairs can be calculated by multiplying the total number of base pairs (200/2 = 100, since each nucleotide pairs with one other nucleotide) by the percentage of G-C base pairs (40% or 0.4):

Number of G-C base pairs = 100 x 0.4 = 40

Therefore, the total number of hydrogen bonds in the dsDNA molecule would be:

Number of hydrogen bonds = (number of G-C base pairs x 3) + (number of A-T base pairs x 2)

= (40 x 3) + (60 x 2)

= 120 + 120

= 240

So the total number of hydrogen bonds in the dsDNA molecule is 240

Read more about hydrogen bonds at

https://brainly.com/question/13935578

#SPJ1

Complete question

A dsDNA molecule consists of 200 nucleotides with 20% guanine.

What is the number of hydrogen bonds in that molecule ? 1) 360 2) 260 3) 180 4) 240

a) The currents should be in the same direction to produce a magnetic field of magnitude 300 uT.

b) To produce a magnetic field of magnitude 300 uT, the two wires must carry an equal current of [tex]I = \sqrt{(300*10^{-6} / (2*(4*\pi*10^{-7}))}[/tex] = 0.220 A.

The magnetic field is created by the combination of the two parallel wires and can be found using Ampere's Law: B = (μ0 * I) / (2π * d), where μ0 is the permeability of free space, I is the current, and d is the distance between the two wires.
When two long straight wires are parallel and 8.0 cm apart, and they are to carry equal currents such that the magnetic field at a point halfway between them has magnitude 300 μT, the currents should be in opposite directions. Let's find out how much current is required. Given:Magnetic field, B = 300 μT. Distance between two wires, d = 8 cm = 0.08 mWe need to find out the current required. Formula: Magnetic field due to the wire, B = µ₀I/(2πd) where µ₀ is the permeability of free space and I is the current. Substituting the given values in the above formula, we get:300 × 10⁻⁶ = (4π × 10⁻⁷) × I/(2π × 0.08)I = (300 × 2 × 0.08)/4π × 10⁻⁷I = 1.2 × 10⁴ A.

Therefore, the current required is 1.2 × 10⁴ A.(a) The currents should be in opposite directions.(b) The required current is 1.2 × 10⁴ A.

Learn more about Ampere's Law:

https://brainly.com/question/29812531

#SPJ11

Answer:

A. it is Electromagnet

B. there are 2 ways to increase the magnetic field in this situation.

hence only by doing first way ( increase number of turns) magnetic field can be increased.

The vector BR in unit vector notation is:

BR = 8.485 î + 8.485 j

What is Vector?

Vectors can be added together to find the result, which is known as the vector sum. The vector sum can be found using the head-to-tail method, where the tail of one vector is placed at the head of the other vector. The vector sum is the vector that goes from the tail of the first vector to the head of the second vector.

To write the vector BR in unit vector notation, we need to find its components in the i and j directions.

Given that the magnitude of the vector is 12.0 and it makes an angle of 45 degrees with the positive x-axis, we can use trigonometry to find the components.

The x-component (i-direction) of the vector is given by:

Bx = B cos θ = 12.0 cos 45° = 8.485

The y-component (j-direction) of the vector is given by:

By = B sin θ = 12.0 sin 45° = 8.485

Learn more about Vector from the given link

https://brainly.com/question/27854247

#SPJ1

The main-sequence option B star has the greatest surface temperature out of the given stars.

A main-sequence star is a star that emits energy by nuclear fusion, particularly helium into carbon. These stars are distinguished by the fact that they are burning hydrogen in their cores. Their temperature, luminosity, and lifetime are all directly related to their mass.

According to the Hertzsprung-Russell diagram, a B-star refers to a hot, bright, and blue star that falls on the main sequence of the chart. The surface temperature of a main-sequence B star is about 10,000 Kelvin. Giant K stars and supergiant A stars have much lower surface temperatures than main-sequence B stars.

A giant K star is a type of star with a radius between 10 and 100 times that of the Sun. They are often orange, reddish-orange, or reddish-yellow in color. Giant K stars are a type of cool star, with temperatures ranging from 3,900 K to 5,200 K.

A supergiant A star is a type of star with a mass of more than 10 times that of the Sun. They are bigger and more luminous than normal stars. Their surface temperature is between 7,500 and 9,000 Kelvin, and they have a life expectancy of around 10 million years.

Learn more about star: https://brainly.com/question/25821071

#SPJ11

Differential partitioning between stationary and mobile phase refers to the separation of components in a mixture based on their differing affinities for a stationary phase (usually a solid or a liquid on a solid support) and a mobile phase (usually a liquid or a gas).

The components with higher affinity for the stationary phase move slower, while those with a higher affinity for the mobile phase move faster.

To clean a TLC spotting capillary, follow these steps:
1. Rinse the capillary with an appropriate solvent (e.g., acetone or methanol) several times.
2. After rinsing, blow air through the capillary to remove any remaining solvent.
3. Allow the capillary to air dry before using it again for spotting.

Regarding the order of increasing Rf values on thin-layer chromatography for octanoic acid, the original list of compounds was not provided in the student question.

However, Rf values are affected by factors like polarity, size, and solubility.

Generally, compounds with lower polarity and smaller size will have higher Rf values, as they have a greater affinity for the mobile phase and will move faster on the TLC plate.

To know more about Rf values here :

https://brainly.com/question/17796724

#SPJ11

The ammeter is measuring 0.02 A (0.02 Amps). To find this value, you need to multiply the reading on the scale (0.05 A) by the multiplier (40). The multiplier is the number of divisions on the scale multiplied by the least count of the scale.

In this case, the multiplier is 40 (4 divisions x 0.01 A least count). Therefore, the current measured is 0.02 A (0.05 A x 40 = 0.02 A). This is significantly less than the other values listed (2 A, 0.2 A, 0.002 A, and 10 A), so it is unlikely that the ammeter is measuring any of them.

An ammeter is an instrument used to measure electrical current. It is connected in series with the circuit, meaning that the current flows through the ammeter.

The reading is usually displayed on a scale, with each division having a particular least count. This least count is then multiplied by the number of divisions on the scale to get the multiplier. This multiplier is then multiplied by the reading on the scale to determine the current being measured.

Know more about ammeter here

https://brainly.com/question/18404570#

#SPJ11

Answer:

if it is -1^02

your answer is 1

Sedimentary rock refers to any rock that has formed as a result of the lithification of sediment, including clastic, chemical, or organic remnants.

To know more about rock

https://brainly.com/question/12249924

#SPJ4

The synchronous motor should have 24 poles and the synchronous generator should have 20 poles in order to convert 50 Hz to 60 Hz power

Given that the location in Europe requires 300 kW of 60 Hz power and the only power source available operates at 50 Hz, it is decided to generate the power by means of a motor-generator set consisting of a synchronous motor driving a synchronous generator. It is required to find how many poles each of the two machines should have in order to convert 50 Hz to 60 Hz power.

Let the synchronous motor have ns number of poles and synchronous generator have ng number of poles.In a synchronous machine, the number of poles is directly proportional to the synchronous speed of the machine.

Hence, synchronous speed (n) is given by; n = 120f/p

where f is the frequency of the supply in Hz and p is the number of poles.

Since the generator is required to deliver power at 60 Hz, the synchronous speed of the generator should be 3600 RPM.∴ 3600 = 120 × 60 / ng

Solving this, we get;

[tex]n_g = 20[/tex]

Also, since the motor is supplied with a 50 Hz power supply, its synchronous speed should be 3000 RPM.∴ 3000 = 120 × 50 / [tex]n_s[/tex]

Solving this, we get; [tex]n_s[/tex] = 24

Therefore, the synchronous motor should have 24 poles and the synchronous generator should have 20 poles in order to convert 50 Hz to 60 Hz power.

To know more about Generator refer here :

https://brainly.com/question/12475693

#SPJ11

The maximum kinetic energy of the photoelectrons when light of wavelength 300.0 nm falls on the same surface is 1.83 eV.

The maximum kinetic energy of the photoelectrons when light of wavelength 300.0 nm falls on the same surface is 1.83 eV.Step-by-step explanation:

Given, The wavelength of light, λ₁ = 400.0 nm.

The maximum kinetic energy of the emitted photoelectrons, K₁ = 1.10 eV. We need to find the maximum kinetic energy of the photoelectrons when light of wavelength 300.0 nm falls on the same surface.

We know that the maximum kinetic energy of the photoelectrons is given byK.E = (hc/λ) - Φwherehc = 4.14 x 10⁻¹⁵ eV s.

Planck's constant = 6.63 x 10⁻³⁴ JsΦ = work function of the metal surface.

The work function of the metal surface is the energy required to remove an electron from the metal surface. It is the minimum energy required to emit an electron from the surface of the metal.

For metals, it lies between 2 eV and 6 eV. We can write K. E₁ = (hc/λ₁) - ΦK.E₂ = (hc/λ₂) - ΦDividing equation (1) by equation (2), we getK.E₁/K.E₂ = λ₂/λ₁.

Substituting the given values, we get

1.10 eV/K.E₂ = 300.0 nm/400.0 nmK.E₂ = (1.10 eV)(400.0 nm)/(300.0 nm)K.E₂ = 1.83 eV

For more details about kinetic energy click here:

https://brainly.com/question/26472013#

#SPJ11

Answer:

Approximately [tex]73.6\; {\rm m\cdot s^{-1}}[/tex].

([tex]v = (1/2)\, g\, t[/tex], assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].)

Explanation:

Assume that the air resistance on the ball is negligible. Let [tex]v[/tex] denote the initial velocity of the ball.

The kinetic energy of the ball will be conserved. Hence, when the ball returns to the starting position, the ball will be travelling at the same speed but in the opposite direction (downwards.) The velocity will become [tex](-v)[/tex].

The change in the velocity of the ball would be [tex]\Delta v = ((-v) - v) = (-2\, v)[/tex].

Change in velocity is also equal to [tex]a\, t[/tex], where [tex]a[/tex] is acceleration and [tex]t[/tex] is the time required to achieve such change. Under the assumptions, acceleration of the ball will be constantly [tex]a = (-g)[/tex]. Hence:

[tex]\Delta v = a\, t = (-g)\, t[/tex].

Since [tex]\Delta v = ((-v) - v) = (-2\, v)[/tex]:

[tex](-2\, v) = \Delta v = (-g)\, t[/tex].

[tex]\begin{aligned}v &= \frac{(-g)\, t}{(-2)} = \frac{g\, t}{2}\end{aligned}[/tex].

Substitute in [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex] and [tex]t = 15.0\; {\rm s}[/tex] to obtain:

[tex]\begin{aligned}v &= \frac{g\, t}{2} \\ &= \frac{(9.81)\, (15.0)}{2}\; {\rm m\cdot s^{-1}} \\ &\approx 73.6\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

When two different wires with identical cross-sectional areas carry the same current, the drift velocity will be lower in the better conductor.

To understand this, let's look at the drift velocity equation:
vd = I / (nAe)
In this equation, vd represents the drift velocity,

I is the current,

n is the number density of free electrons,

A is the cross-sectional area, and e is the charge of an electron.
Since the wires have the same cross-sectional areas (A)

and carry the same current (I),

we can focus on the number density of free electrons (n).

A better conductor has a higher number density of free electrons, meaning there are more free electrons available to carry the charge.

This is one of the main factors contributing to the increased conductivity of the better conductor.
Now, let's examine the equation again.

If n is higher in the better conductor, then the value of the fraction I / (nAe) will be smaller.

This means that the drift velocity (vd) will be lower in the better conductor.
In summary, the drift velocity is lower in the better conductor due to its higher number density of free electrons, which allows for more efficient charge transfer without the need for high drift velocities.

For similar question on velocity.

https://brainly.com/question/25749514

#SPJ11

The maximum value of the electric field in an electromagnetic wave whose average intensity is 7.55 W/m² is 30.5 V/m.

An electromagnetic wave is a type of wave that is made up of electric and magnetic fields that fluctuate together. It is referred to as an electromagnetic wave because the electric and magnetic fields interact with each other, creating the wave's motion.

The equation for the average intensity of an electromagnetic wave is given by

I = 1/2εcE²

where I is the average intensity, ε is the permittivity of free space, c is the speed of light, and E is the maximum value of the electric field.

Equating the given value of average intensity to the equation,

7.55 W/m² = 1/2 × 8.85 × [tex]10^{-12}[/tex] F/m × (3 × [tex]10^{8}[/tex] m/s) × E²

simplifying and solving for E,

E = 30.5 V/m

Thus, the maximum value of the electric field in an electromagnetic wave whose average intensity is 7.55 W/m² is 30.5 V/m.

Know more about the Electric field here :

https://brainly.com/question/19878202

#SPJ11

To determine the fraction of Tarzan's maximum kinetic energy when the vine makes an angle of 30 degrees with the vertical, we need to use the conservation of energy.

Tarzan's initial potential energy is converted into kinetic energy as he swings down on the vine. When the vine makes an angle of 30 degrees with the vertical, Tarzan's potential energy has decreased by half, so his kinetic energy must have increased by the same amount. Therefore, at this point, Tarzan has half of his maximum kinetic energy. We can express this as a fraction by dividing the current kinetic energy (half the maximum) by the maximum kinetic energy, giving a fraction of 1/2.

To know more about conservation of energy, here

brainly.com/question/2137260

#SPJ4

The wave in which medium particles move perpendicular to the direction of wave is transverse wave. Option b is correct.

The wave in which medium particles move perpendicular to the direction of wave is a transverse wave. In a transverse wave, the motion of the particles in the medium is perpendicular to the direction of propagation of the wave. This means that when a transverse wave passes through a medium, the particles in the medium move up and down or side to side, perpendicular to the direction of the wave. Examples of transverse waves include light waves, electromagnetic waves, and waves on a string.

In contrast, in a longitudinal wave, the motion of the particles in the medium is parallel to the direction of propagation of the wave. Hence option b is correct choice.

To know more about waves, here

brainly.com/question/19129743

#SPJ4

The frequency of oscillation is multiplied by the square root of the product of the factors of inductance and capacitance. In this case, the frequency is multiplied by the square root of 9.72 multiplied by 6.12, which is equal to 11.3.

Suppose that the current in an LC circuit oscillates with a certain frequency. If the inductance is increased by a factor of 9.72 and the capacitance is increased by a factor of 6.12, the factor by which the frequency of oscillation is multiplied is calculated as follows:

Let L be the initial inductance and C be the initial capacitance of the LC circuit. The angular frequency of oscillation of the LC circuit is given by the expression [tex]\omega= 1/\sqrt{LC}[/tex] where ω is the angular frequency, L is the inductance, and C is the capacitance.

The new angular frequency of the LC circuit is ω′ = 1/√(L′C′)where L′ and C′ are the new inductance and capacitance, respectively. Let L′ = 9.72L and C′ = 6.12C. Substituting these values into the equation above gives ω′ = 1/√(9.72LC × 6.12C)ω′ = 1/√(59.4384LC)ω′ = (1/√59.4384) × (1/√(LC))ω′ = (0.161)ω.

Therefore, the factor by which the frequency of oscillation is multiplied is 0.161. Therefore, the frequency of oscillation is decreased by a factor of 6.192.

Learn more about the frequency of oscillation:

https://brainly.in/question/34373636

#SPJ11

Answer:

People tend to live in these areas because they believe that the benefits of the location outweigh the risks. Most volcanoes and seismic zones are safe for long periods between eruptions or seismic events. Often, tectonic events can be adjusted and residents perceive these events as predictable.