Answer:
Explanation:
a. normal force is mass * acceleration due to gravity, so the normal force is = 4 * 9.8, which is 39.2 N.
b. friction force is normal force * the coefficient of the friction, for static friction: .3 * 39.2 = 11.76 N. For kinetic friction: .1 * 39.2 = 3.92 N.
c. net force is the sum of all force apply on the object, since the object is rest at a table, then the only force apply on the object is the horizontal force, which is 10N, since the static force is greater than the force apply, then our net force is -1.76N( 10 - 11.76).
d. the acceleration of the box is 0 because the box is not moving.
a : normal force = 39.2N
b : static force = 11.76N, kinetic force = 3.92N
c : net force = -1.76N
d : acceleration = 0
Reflection
Personally identifiable information (PII) is information about an individual that identifies, links, relates, or describes them. Examples of Pll include:
• social security number
• age • race
• phone number(s)
• medical information
• financial information
• biometric (medical) data
1. Some trusted websites can use this data to the benefit of the user. Can you think of any website that uses Pll in a way that enhances the user's experience?
2. Pll can also be used for criminal acts or to stalk or steal the identity of a person. Can you think of a way in which pll can be used in a malecious way?
Some of the websites that use personally identifiable information (PII) in a way that enhances user experience are:
Face-bookLink-edInAma-zonThe following are some of the malicious ways in which personally identifiable information (PII) can be used:
Identity Th-eftStal-kingPhis-hing Sca-msMore detailed explanation on the websites that use personally identifiable information (PII) in a way that improves the user experience are:
Face-book: uses the personal information of its users to offer a more personalized experience, including showing targeted ads and displaying content that is most likely to interest each user.Linke-dIn: uses the information provided in users' profiles to show relevant job openings and suggest people they might want to connect with.Ama-zon: uses users' browsing and purchasing history to show personalized product recommendations and offers.More detailed explanation of some of the malicious ways in which personally identifiable information (PII) can be used:
Identity Th-eft: This is a criminal act in which someone uses another person's personal information to open bank accounts, credit cards, or take out loans without the victim's consent. This can cause severe financial damage to the victim.Stal-king: Personal information, such as home address or phone number, can be used by stalkers to locate or harass their victims.Phis-hing Sca-ms: Scammers can use personal information to trick people into giving them money or sensitive information. They may send fake emails or text messages that appear to be from a legitimate source, such as a bank, and ask for personal information such as login credentials or social security numbers.Learn more about personally identifiable information:
https://brainly.com/question/30023988
#SPJ11
What is the expected slip system for the simple cubic crystal structure?! • <100>{110 0 <111>{100) 0 <111>{110) 0 <111>{111 0 <100>{111} 0 <110>{110} O <110>{111} 0 <100>{100} 0 <110>{100}
The most densely packed direction in a simple cubic structure is ⟨010⟩. In light of this, the One slip system for the basic cubic crystal structure is {100} ⟨010⟩.
This slip system involves the movement of atoms along the <100> direction, with the highest resolved shear stress occurring along the {110} planes. The <100>{110} slip system is favored because it has the lowest resolved shear stress, which means that it requires less energy to activate and is therefore more likely to occur. Other slip systems may also be active in simple cubic metals depending on the orientation and applied stress direction. For example, the <110>{111} and <111>{110} slip systems may also be active in certain crystal orientations and stress directions. Overall, the expected slip system for a simple cubic crystal structure is dependent on the specific crystal orientation and applied stress direction.
Visit here to learn more about the slip system: https://brainly.com/question/30166461
#SPJ4
The best designed saw for cutting miter joints is a ______.
A backsaw is the saw that is best suited for cutting mitre joints. For precise tasks like cutting dovetails, mitres, or tenons in cabinetry and joinery, backsaws are typically used in woodworking.
Any hand saw with a stiffening rib on the edge opposite the cutting edge known as a backsaw enables better control and more accurate cutting than other saws. For precise tasks like cutting dovetails, mitres, or tenons in cabinetry and joinery, backsaws are typically used in woodworking. Backsaws can only cut a certain amount of depth due to the stiffening rib. Backsaws typically have teeth that are closely spaced and frequently have little to no set.
Visit here to learn more about the Backsaw: https://brainly.com/question/28957018
#SPJ4
technician a says a vacuum leak will cause an engine to run richer than normal. technician b says a vacuum leak can cause an engine to detonate. who is correct?
B) Technician B only is correct to say a vacuum leak can cause an engine to detonate
Technician A is incorrect because a vacuum leak will cause an engine to run leaner, not richer. This happens due to the extra air entering the engine, which results in a higher air-to-fuel ratio.
Technician B is correct because a vacuum leak can indeed cause an engine to detonate due to the leaner mixture, which can lead to higher combustion temperatures and the possibility of detonation.
A vacuum leak can cause the air/fuel mixture to become lean, which increases combustion chamber temperatures and pressures. This can cause pre-ignition or detonation, which can lead to engine damage.
Learn more about automotive technology and engine mechanics:https://brainly.com/question/15511400
#SPJ11
Your question is incomplete, but probably the complete question is :
Technician A says a vacuum leak will cause an engine to run richer than normal. Technician B says a vacuum leak can cause an engine to detonate. Who is correct?
A)A only
B)B only
C)both A and B
D)neither A nor B
generally, uncontrolled intersections are found in
signment A mass of 500 kg is raised to a height of 6 m in 30s. Find (a) the work done and (b) the power developed
29,430 J of work is required to raise a mass of 500 kg to a height of 6 m in 30 seconds (Joules).
What is the weight formula based on Newton?F = m 9.8 m/s2 is the formula for computing weight, where m is the object's mass in kilogrammes and N is the object's weight in Newtons (N). The SI unit for weight is the Newton, and one Newton is equal to 0.225 pounds.
work = force x distance
weight = mass x gravity
weight = 500 x 9.81
weight = 4905 N
Now, we can calculate the work done:
work = force x distance
work = weight x height
work = 4905 x 6
work = 29,430 J
To know more about mass visit:-
https://brainly.com/question/16200632
#SPJ1
who was the first female electrical engineer in the united states? what invention is she known for?
an m14x2, iso class 8.8 bolt with rolled threads is preloaded to 75% of its proof strength while clamping a 3 cm thick sandwich of solid aluminum. a 5 kn external load is applied to the aluminum that tends to cause the sandwich to separate. what are the factors of safety with respect to joint separation and bolt yielding?
The factor of safety with respect to joint separation is 9.61 and with bolt yielding is 11.02.
How factor of safety varies with joint separation and bolt yielding?
To calculate the factors of safety with respect to joint separation and bolt yielding for an M14x2, ISO class 8.8 bolt with rolled threads preloaded to 75% of its proof strength while clamping a 3 cm thick sandwich of solid aluminum, follow these steps:
Determine the proof strength (Sp) of the bolt:
Class 8.8 bolts have a minimum proof strength of 640 MPa.
Calculate the preload force (Fp):
Preload is 75% of the proof strength.
Fp = 0.75 x Sp x (pi x (d²)/4), where d is the nominal diameter of the bolt (14 mm).
Fp = 0.75 x 640 MPa x (pi x (14²)/4)
= 53,069.64 N
Calculate the clamping force (Fc) after applying the external load:
Fc = Fp - external load
= 53,069.64 N - 5,000 N
= 48,069.64 N
Factor of safety for joint separation (FOS1):
This is the ratio of the clamping force to the external load.
FOS1 = Fc / external load
= 48,069.64 N / 5,000 N
= 9.61
Factor of safety for bolt yielding (FOS2):
This is the ratio of the bolt's proof strength to the applied load, including preload and external load.
FOS2 = Sp / (Fp + external load)
= 640 MPa / (53,069.64 N + 5,000 N)
= 640 MPa / 58,069.64 N
= 11.02
So, the factor of safety with respect to joint separation is 9.61, and the factor of safety with respect to bolt yielding is 11.02.
Learn more about factor of safety
brainly.com/question/13261403
#SPJ11
The figure below shows the foundation plan and a wall section for a building. The entire exterior perimeter of the building is to be waterproofed starting 6 inches from the top of the wall, continuing down the wall, and covering the top of the footing. How many square feet of waterproofing is needed for the building? (25 points)
The correct answer is I do not have access to any figure or visual representation of the building plan you mentioned. Hence, I am unable to provide an accurate calculation for the required square footage of waterproofing material.
However, I can provide you with a general idea of the steps you need to take to calculate the required square footage. Firstly, you need to determine the total perimeter of the building by adding the length of all sides together. Then, subtract the openings such as doors and windows from the total perimeter. Next, you need to determine the height of the wall section that needs to be waterproofed. Measure the distance from the top of the wall down to the top of the footing. Once you have the total perimeter and height of the wall section, you can calculate the square footage required for waterproofing. Simply multiply the perimeter by the height of the wall section to get the total square footage. It's also important to consider any additional factors such as overlaps and waste that may affect the amount of waterproofing material needed. Always remember to add a little extra material to ensure adequate coverage and avoid running short during installation.
To learn more about waterproofing material click on the link below:
brainly.com/question/16363151
#SPJ1
How do mineral nanoparticles in sunscreens protect from UV radiation?a. The particles scatter incoming UV lightb. The particles absorb incoming UV lightc. The particles dissolve with incoming UV lightd. None of these choices are correct
Mineral nanoparticles in sunscreens protect from UV radiation by scattering incoming UV light, the correct option is A.
What are nanoparticles?A nanoparticle is a tiny particle that ranges in size from 1 to 100 nanometers. A nanoparticle is a substance or material that has been manufactured and is used in applications such as cosmetics, sunscreens, and food packaging.
Zinc oxide and titanium dioxide are two common mineral nanoparticles found in sunscreens. They protect the skin by reflecting and scattering UV light before it reaches the skin. Because they are not absorbed into the skin, they are also known as physical blockers or mineral sunscreens.
For more information about nanoparticles, visit:
https://brainly.com/question/16929122
#SPJ11
What does a filter drier do?
Answer:
they trap coarse particulate contamination and copper shavings
A gallon of gasoline has about 1.2 * 10^8 Joules of chemical energy. A car has an 18 gallon fuel tank. The car’s mass is 3700 lbm . It starts driving in Colorado. The car increases its elevation by 6500 N as it drives. The car gets 32 mpg. The total driving distance is 234 miles. The car starts at rest and is now going 68 mph. Determine the total energy change for the car. Describe in as much detail as possible where all the energy went. You can ignore the change in mass of the car that is caused by burning the gasoline (that change is negligible)
Total energy change = PE + KE + Energy consumed = 6500 J + 284859 J + 8.82 * 10^9 J ≈ 8.82 * 10^9 J
How to solveTo find the total energy change, we need to consider the potential energy gained (due to elevation increase), kinetic energy gained (due to increase in speed), and the energy consumed from gasoline.
Potential energy change (PE) = m * g * h = (3700 lbm * 0.453592 kg/lbm) * 9.81 m/s² * (6500 N / (3700 lbm * 0.453592 kg/lbm * 9.81 m/s²)) = 6500 J
Kinetic energy change (KE) = 0.5 * m * (v_f² - v_i²) = 0.5 * (3700 lbm * 0.453592 kg/lbm) * ((68 mph * 0.44704 m/s/mph)² - 0) ≈ 284859 J
Energy consumed from gasoline = Energy per gallon * gallons used = (1.2 * 10^8 J/gallon) * (234 miles / 32 mpg) ≈ 8.82 * 10^9 J
Total energy change = PE + KE + Energy consumed = 6500 J + 284859 J + 8.82 * 10^9 J ≈ 8.82 * 10^9 J
Most of the energy went into overcoming the car's internal inefficiencies (engine, transmission, etc.) and external resistances (air drag, rolling resistance). The remaining energy was used to increase the car's potential and kinetic energy.
Read more about energy change here:
https://brainly.com/question/23883411
#SPJ1
oil enters a counterflow heat exchanger at 450 k with a mass flow rate of 10 kg/s and exits at 350 k. a separate stream of liquid water enters at 208c, 5 bar. each stream experiences no significant change in pressure. stray heat transfer with the surroundings of the heat exchanger and kinetic and potential energy effects can be ignored. the specific heat of the oil is constant, c 5 2 kj/kg k. if the designer wants to ensure no water vapor is present in the exiting water stream, what is the allowed range of mass flow rates for the water, in kg/s?
The allowed range of mass flow rates for water, in kg/s is 23.56 - 30.44.
Given,
The mass flow rate of oil, m₁ = 10 kg/sThe inlet temperature of oil, T₁ = 450 kThe exit temperature of oil, T₂ = 350 kThe inlet temperature of water, T₃ = 208 °C = (208 + 273) K = 481 K
The inlet pressure of water, P₃ = 5 bar = 500 kPaThe specific heat of oil, c = 2 kJ/kgK
We can calculate the heat transferred to water by the oil using the heat balance equation as:
q = m₁c(T₁-T₂)
Where,q = Heat transferred to water by oilm₁ = mass flow rate of oilc = specific heat of oilT₁ and T₂ = inlet and exit temperature of oil respectively
Substituting the values in the equation,q = 10 × 2 × (450-350)q = 2000 kJ/sThe heat transferred to water is equal to the heat gained by water, i.e.,q = m₂c(T₄-T₃).
Where,m₂ = mass flow rate of waterc = specific heat of waterT₃ and T₄ = inlet and exit temperature of water respectively.
Substituting the values in the equation,2000 = m₂ × 4.18 × (481 - T₄)T₄ = 481 - (2000 / (m₂ × 4.18))
Range of mass flow rates for water, can be calculated by assuming the exit temperature of water to be 100 °C (373 K).481 - (2000 / (m₂ × 4.18)) = 373m₂ = 28.12 kg/s481 - (2000 / (m₂ × 4.18)) = 373m₂ = 25.64 kg/s
Therefore, the allowed range of mass flow rates for water, in kg/s is 23.56 - 30.44.
Learn more about inlet temperature
brainly.com/question/30137358
#SPJ11
Question 3
Calculate the reinforcement required for a 250 x 600 reinforced concrete beam simply
supported with an effective length of 8.0 m. The beam carries its self-weight plus a live load of
30KN/m. The exposure conditions may be considered as mild. fcu = 30; N
-; fy = 460N/mm².
mm²
Design also the shear reinforcement for the beam.
420 kN, where 0.25 is the beam's width, 0.6 is its effective depth, 25 is the concrete's unit weight, and 24 is the beam's span in metres.
Which beam has an effective depth of 500 mm and a breadth of 300 mm?The effective depth and width of a doubly reinforced rectangular concrete beam are 500 mm and 300 mm, respectively. 2200 mm 2 of tensioned steel and 628 mm 2 of compression steel are used to reinforce the beam.
Wd = self-weight of the beam + live load
= (0.25 x 0.6 x 25 x 24) + (30 x 8)
= 180 + 240
= 420 kNM
[tex]= Wd x L^2 / 8[/tex]
[tex]= 420 x 8^2 / 8[/tex]
= 3360 kN.mAs
= M / (0.87 x fy x d)
[tex]As = (3360 x 10^6) / (0.87 x 460 x 425)[/tex]
= 23,583.8 mm^2
Vd = Wd x L / 2
= 420 x 8 / 2
= 1680 kN
Vc = 0.5 x fcu x b x d
= 0.5 x 30 x 250 x 425
= 3984375 N
To know more about effective depth visit:-
https://brainly.com/question/20595009
#SPJ1
is talking about uncertainty important in science?
In many ways, uncertainty is essential to science because it motivates researchers to conduct additional studies and research.
Being free of uncertainty is a major driving force behind many actions and decisions because the desire for certainty is a strong human emotion. We never know how decisions or actions will turn out, even when we seem to put uncertainty to rest—we pick a career, our elected officials tighten laws to address pollution, the Federal Reserve Board lowers interest rates to boost economic activity. Whether we like it or not, there is always uncertainty.
But a lot of us tend to believe that science offers conclusive solutions. In the end, science explains how and why things occur. Science is a problem-solver. Future predictions are made by scientists.
However, despite our desire for scientific findings to be indisputable, they are not. Scientists can't work with absolute certainty. Probabilities are used to base conclusions. Predictions can be proved wrong by new information, and well-established theories can even be changed. In many ways, uncertainty is essential to science because it motivates researchers to conduct additional studies and research.
Visit here to learn more about the Scientists: https://brainly.com/question/12965344
#SPJ4
water is pumped from a lower reservoir to a higher reservoir by a pump that provides 23 kw useful mechanical power to the water. the free surface of the upper reservoir is 57 m higher than that of the lower reservoir. if the flow rate of water is measured to be 0.03 m3/s, determine the irreversible head loss of the system and the lost mechanical power during this process.
Irreversible head loss of the system is 26.923 m and the lost mechanical power during this process is 23 kW.
How to determineGiven data:
Useful mechanical power provided by pump to the water = 23 kW
Free surface height difference between lower and upper reservoirs = 57 m
Flow rate of water = 0.03 m³/s
The formula for power input to the water is:
P = ρ × Q × g × H
Here,ρ is the density of water = 1000 kg/m³
Q is the flow rate of water = 0.03 m³/s
g is the acceleration due to gravity = 9.81 m/s²
H is the total head loss between the lower and upper reservoirs
Let's calculate the power input to the water:
P = ρ × Q × g × H
23,000 = 1000 × 0.03 × 9.81 × H
H = 78.861 m
The formula for irreversible head loss is:
H_L = (P(in) - P(out) ) / (ρ × g × Q)
Here,P(in) is the power input to the water = 23 kW
P_out is the power output of the water at the upper reservoir = 0 (as there is no pump in the upper reservoir)
ρ is the density of water = 1000 kg/m³
g is the acceleration due to gravity = 9.81 m/s²
Q is the flow rate of water = 0.03 m³/s
Let's calculate the irreversible head loss:
H_L = (23,000 - 0) / (1000 × 9.81 × 0.03)
H_L = 26.923 m
The formula for lost mechanical power is:
P_L = P(in) - P(out)
Here,P(in) is the power input to the water = 23 kW
P(out) is the power output of the water at the upper reservoir = 0 (as there is no pump in the upper reservoir)
Let's calculate the lost mechanical power:
P_L = 23,000 - 0
P_L = 23,000 W or 23 kW
Learn more about irreversible losses at
https://brainly.com/question/22840493
#SPJ11
explain how the addition of a second winding to a single-phase induction motor allows them to produce a torque under starting conditions?
When a single-phase induction motor has a second winding, it allows it to produce torque under starting conditions. The addition of a second winding to a single-phase induction motor makes it possible to produce a rotating magnetic field that is approximately equal to that produced by a three-phase motor.
This rotating magnetic field is used to create torque in the rotor. The two windings on the stator have different numbers of turns and are typically wound with different wire diameters to provide the necessary phase shift. The primary winding, which is usually on the outer circumference of the stator, is wound with a thicker wire and has a larger number of turns. The secondary winding, which is typically placed inside the primary winding, is wound with a thinner wire and has fewer turns.
To create a rotating magnetic field with a single-phase supply, the secondary winding is given a phase shift relative to the primary winding. When the primary winding is energized, it creates a magnetic field that is nearly stationary. When the secondary winding is energized, it creates a magnetic field that is displaced in space and time from the primary field. The combined fields create a rotating magnetic field that rotates at a rate determined by the frequency of the supply.
The rotor of the induction motor is then attracted to this rotating magnetic field and begins to rotate. The torque produced by the motor depends on the strength of the magnetic field and the amount of slip between the rotor and the rotating field. The slip is the difference in speed between the rotating field and the rotor, and it is what allows the rotor to accelerate and produce torque.
Learn more about single-phase induction motor:https://brainly.com/question/28852537
#SPJ11
the american wire gage numbers specify the size of round wire in terms of its diameter and cross-sectional area. true or false
The following statement is true. The American wire gage numbers specify the size of round wire in terms of its diameter and cross-sectional area.
The American Wire Gauge (AWG) is a standardized system used in the United States to specify the diameter of electrical conductors such as wires and cables. The AWG number assigned to a wire indicates its cross-sectional area, which in turn determines the wire's current-carrying capacity and other electrical properties.
As the AWG number increases, the diameter of the wire decreases, and vice versa. For example, a wire with a higher AWG number (such as 24) has a smaller diameter and lower current-carrying capacity than a wire with a lower AWG number (such as 12).
In summary, the AWG number of a wire specifies its diameter and cross-sectional area, which are important factors in determining its electrical properties.
Learn more about American Wire Gauge here brainly.com/question/14868667
#SPJ4
how to hook up red, blue, green cables to red yellow white
If you have a device with red, blue, and green cables and a TV or other device with red, yellow, and white inputs, you can connect them using a component video to composite video adapter.
The red cable on the component video cable corresponds to the red input on the adapter, the blue cable corresponds to the yellow input, and the green cable corresponds to the white input.
So, you would connect the red cable to the red input on the adapter, the blue cable to the yellow input, and the green cable to the white input. Then, you can connect the adapter to the TV or other device using a composite video cable, which has a yellow connector for video and red and white connectors for audio.
Note that using a component video to composite video adapter will result in a loss of quality, as component video is capable of transmitting higher-quality video than composite video.
Learn more about video adapter here brainly.com/question/29101775
#SPJ4
A piston -cylinder device as in figure, with a set of stops on the top. initially contains 1 kg of air at 200 kPa and 27 degree C. Heat is now transferred to the air. and the piston rises until it hits the stops, at which point the volume is 1.5 times the initial volume. More heat is transferred until the pressure inside the cylinder also 1.5 times the initial pressure. Determine I A) the total work done (in kJ). (B) the heat transfer amount (in kJ). and (C) show the process on a P-v diagram.
To determine the total work done, heat transfer amount, and the process on a P-v diagram for the given scenario, we need to use the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the amount of heat added minus the amount of work done.
A) To find the total work done, we need to calculate the area under the curve of the pressure-volume diagram. This area can be divided into two parts: the work done in expanding the gas from initial volume to final volume, and the work done in increasing the pressure from an initial pressure to final pressure. Using the ideal gas law, we can find the initial and final states of the gas and then use the formula for work done: W = PΔV. The total work done can be found by adding the work done in expansion and compression.
B) The heat transfer amount can be found using the formula Q = ΔU + W, where ΔU is the change in the internal energy of the system. We can find the change in internal energy using the First Law of Thermodynamics and then add the work done to find the heat transfer amount.
C) To show the process on a P-v diagram, we need to plot the initial and final states of the gas and connect them with a curve. The curve will represent the process that the gas undergoes. The process can be either adiabatic, isothermal, or isobaric, depending on the amount of heat transfer and the type of work done.
Find out more about total work done
at brainly.com/question/28813262
#SPJ4
A gas is compressed. The measured volume and absolute pressure before compression
are 0.30m3
and 50.7kPa, respectively. After compression the volume and the pressure
becomes 0.111m3
and 202.8kPa, respectively. What is the compressibility and bulk
modulus of elasticity of this gas?
Answer:
To determine the compressibility and bulk modulus of elasticity of a gas, we can use the following formulas:
Compressibility:
β = - (1/V) * (∆V/∆P)
where V is the initial volume of the gas, ∆V is the change in volume, and ∆P is the change in pressure.
Bulk modulus of elasticity:
B = - V * (∆P/∆V)
where V is the initial volume of the gas, ∆V is the change in volume, and ∆P is the change in pressure.
Using the given values, we can calculate the compressibility as follows:
∆V = V2 - V1 = 0.111m3 - 0.30m3 = -0.189m3
∆P = P2 - P1 = 202.8kPa - 50.7kPa = 152.1kPa
Therefore,
β = - (1/0.30m3) * (-0.189m3/152.1kPa) ≈ 0.0048 kPa^-1
Similarly, we can calculate the bulk modulus of elasticity as follows:
B = - 0.30m3 * (152.1kPa/-0.189m3) ≈ 2418 kPa
Therefore, the compressibility of the gas is approximately 0.0048 kPa^-1, and the bulk modulus of elasticity is approximately 2418 kPa.
Explanation:
The acceleration function of an object doing curvilinear motion is a = {(-0.2)i+2j+1.5k) m/s², where t is in s. If its initial velocity vo 8i m/s, and initial position is at the origin, determine the magnitude of its velocity when t = 3 s.
Answer:
the magnitude of the velocity when t = 3 s is 10.54 m/s.
Explanation:
To solve this problem, we can use the following kinematic equation that relates velocity, acceleration, and time:
v = vo + at
where:
v = final velocity
vo = initial velocity
a = acceleration
t = time
First, we need to find the velocity of the object at time t = 3 s. To do this, we can substitute the given values into the kinematic equation and solve for v:
v = vo + at
v = 8i + (-0.2i+2j+1.5k) x 3
v = 8i - 0.6i + 6j + 4.5k
v = 7.4i + 6j + 4.5k
The magnitude of the velocity is given by:
|v| = sqrt(vx^2 + vy^2 + vz^2)
where:
vx, vy, vz = the x, y, and z components of the velocity vector
Substituting the values from above, we get:
|v| = sqrt((7.4)^2 + 6^2 + (4.5)^2)
|v| = sqrt(54.81 + 36 + 20.25)
|v| = sqrt(111.06)
|v| = 10.54 m/s (approx)
Pueden las carreteras ser invisibles
No, las carreteras no pueden ser invisibles. Las carreteras son estructuras físicas que están diseñadas para ser visibles y reconocibles para los conductores y peatones. La visibilidad es una parte fundamental de la seguridad vial, ya que permite que los conductores y peatones vean las señales de tráfico, las líneas de carril, los cruces peatonales, entre otros elementos importantes para la seguridad en la carretera. Además, las carreteras invisibles podrían ser muy peligrosas ya que podrían causar accidentes automovilísticos y peatonales graves.
Select the correct definition for the word: Decimal.
A shortened version of the term "decimal fraction."
The top number in a fraction.
The shape made by two straight lines meeting in a point.
The bottom number in a fraction.
The correct definition for the word Decimal is a shortened version of the term "decimal fraction.A decimal is a fraction that has a denominator of ten, hundred, thousand, or any other power of ten.
Decimals are a way of expressing parts of a whole, especially when dealing with fractional values. They are often used in money calculations, measurement, and science to give precise values.The decimal system is a method of organizing numbers that employs the digits 0 through 9. It is based on the powers of ten and place values. Decimal fractions can subtracted, added, multiplied, and divided like whole numbers, making them simple to work with.
Learn more about Decimal here:
https://brainly.com/question/28338004
#SPJ4
A bar of aluminum alloy 7075-T6 with a yield strength of 68 ksi and an ultimate strength of 75 ksi is part of a system for lifting a large container of water having a density of 1kg/liter. The bar of 7075-T6 has a square cross section that is 1. 5cm X 1. 5 cm. If the bar will be loaded in tension during the lifting operation, what is the maximum number of cubic feet of water that can be lifted before the bar deforms permanently
To solve this problem, we need to calculate the maximum weight of the water that can be lifted before the bar of 7075-T6 alloy deforms permanently.
First, we need to convert the dimensions of the bar from centimeters to inches:
1.5 cm = 0.5906 inches
Next, we need to calculate the cross-sectional area of the bar:
A = (0.5906 inches) * (0.5906 inches) = 0.348 square inches
Then, we can calculate the maximum force that the bar can withstand before deforming permanently:
F_yield = σ_yield * A = 68 ksi * 0.348 square inches = 23.6 kips
We can convert the maximum force to weight using the acceleration due to gravity:
W_max = F_max / g = 23.6 kips / 32.2 ft/s^2 = 0.733 kips
Finally, we can calculate the maximum volume of water that can be lifted by dividing the maximum weight by the density of water:
V_max = W_max / (ρ_water * g) = 0.733 kips / (1 kg/liter * 32.2 ft/s^2 * 16.3871 liters/ft^3) = 1.40 cubic feet
Therefore, the maximum number of cubic feet of water that can be lifted before the bar deforms permanently is 1.40 cubic feet.
To know more about 7075-T6 alloy click here:
brainly.com/question/15402027
#SPJ4
which of the following is a good example of a message signal? (a) a radio frequency signal. (b) a pilot carrier. (c) a baseband signal
(c) A baseband signal is a good example of a message signal as it carries the actual information to be transmitted, while (a) and (b) are typically used for carrier signals.
Out of the given options, a baseband signal is a good example of a message signal. This is because a baseband signal carries the actual information to be transmitted, such as audio or video data, while a radio frequency (RF) signal or a pilot carrier is typically used for the carrier signal, which is modulated by the message signal to carry the information over the transmission medium.
The baseband signal is a low-frequency signal that contains the original information to be transmitted, and it is typically in the range of a few hundred Hertz to a few megahertz. The carrier signal is a high-frequency signal that is modulated by the baseband signal, and it is typically in the range of tens to hundreds of megahertz or even higher. Together, the baseband signal and the carrier signal form the modulated signal that is transmitted over the communication channel.
Learn more about baseband signal here:
brainly.com/question/15831249
#SPJ1
Water flows through a horizontal bend and discharges into the atmosphere as shown. When the pressure gauge reads 10 psi, the resultant x-direction anchoring force, FAX in the horizontal plane required to hold the bend in p lace is shown in the figure. Determine the flow rate through the bend and the y-direction anchoring force, FAY required to hold the bend in place. The flow is not frictionless. Ans: 7.01 ft^3/s and 674 lbs.
FAY = 62.4 lb/ft^3 * 7.01 ft^3/s * 11.67 ft/s * sin(30 degrees) ≈ 674 lbs
Thus, the flow rate through the bend is approximately 7.01 ft^3/s, and the y-direction anchoring force required to hold the bend in place is approximately 674 lbs.
what size copper service conductors are required for a multifamily building that has a total demand load of 260 kw for a 120/208v wye, three-phase system? the conductors are paralleled in two raceways.
Without additional information on the raceway distance, ambient temperature, and voltage drop, it is impossible to determine the size of the copper service conductors required.
To determine the size of copper service conductors required for a multifamily building with a total demand load of 260 kW for a 120/208V wye, three-phase system, additional information is needed, such as the raceway distance, ambient temperature, and voltage drop. Without this information, it is impossible to accurately calculate the conductor size.
In general, conductor sizing is determined by the National Electrical Code (NEC), which provides guidelines based on various factors, including the load, the type of conductor, the length of the run, and the ambient temperature. To determine the conductor size for this particular situation, a licensed electrician or engineer would need to perform a detailed load calculation and take into account the specific installation requirements and local code regulations.
Learn more about copper service here:
brainly.com/question/14801242
#SPJ1
Gas is contained in a vertical, frictionless piston–cylinder device. The piston has a mass of 4 kg and a cross-sectional area of 35 cm2. A compressed spring above the piston exerts a force of 60 N on the piston. If the atmospheric pressure is 95 kPa, determine the pressure inside the cylinder.
Answer:135.397 Kpa
Explanation:
Given : mass of piston = 4 kg
cross-sectional area = 35
exert force of piston is = 60 N.
p = 95 kPa
To find atmospheric pressure inside the cylinder
total force acting on the piston = spring force + piston self weight
pressure due to Forces
Pgauge=W/A+F/A
Mag/A+F/A
3.2*9.82/35*10^5+110/35*10^5
8969.14331428.571
Pgauge=4039.714=40.398KPa
Hence total pressure inside the cylinder
=Patm+Pgauge
= 95+40.398
= 135.397 Kpa
you are designing a new material for use in an airplane body. what properties should the material have?
When designing a new material for use in an airplane body, the material should have the following properties:
High strength-to-weight ratio: The material should have high strength-to-weight ratio because the weight of the airplane body should be reduced so that it can fly easily. High stiffness: The material should have high stiffness because it should resist the forces acting on it. Low density: The material should have low density because the weight of the airplane body should be reduced so that it can fly easily. Corrosion-resistant: The material should be corrosion-resistant because it should resist corrosion by exposure to the atmosphere. High fatigue strength: The material should have high fatigue strength because it should resist the forces acting on it.
Fatigue strength is the maximum stress that can be applied to a material without causing it to break. The above properties are crucial when designing a new material for use in an airplane body.
To learn more about this visit - You are designing a new material for use in an airplane body : https://brainly.com/question/17154418
#SPJ11