Review the ray tracing provided.
A thin lens is located centered over a 14 cm ruler at the 7 cm mark. A black dot is located at 5.5 cm on the left side of the lens and at 8.5 cm on the right side of the lens. An arrow is located at the 6 cm mark. Rays appear to go from the head of the arrow towards the lens, and then extend backwards to the tip of an arrow located at 4 cm.
Which of the following best describes the image?
Inverted, smaller, and real
Upright, smaller, and virtual
Upright, larger, and real
Upright, larger, and virtual
The best description of the image is (B) upright, smaller, and virtual is correct option.
To determine the characteristics of the image, we can use the thin lens equation:
1/f = 1/do + 1/di
where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).
We can also use the magnification equation:
m = -di/do
where m is the magnification.
First, we need to determine the focal length of the lens. We can use the fact that the lens is centered over the 14 cm ruler at the 7 cm mark, which means the lens is 7 cm from both the left and right sides of the ruler. Since the ruler has a total length of 14 cm, the lens must be in the middle, and the distance from the lens to the ruler is 7 cm. Therefore, the lens has a focal length of 7 cm.
Next, we can use the thin lens equation to find the image distance for the arrow located at the 6 cm mark:
1/7 = 1/(6 - 7) + 1/di
di = -7 cm
The negative sign indicates that the image is inverted.
We can also use the magnification equation to find the magnification of the image:
m = -di/do = -(-7)/(-6) = 7/6
The positive magnification indicates that the image is upright.
Finally, we can use the image distance and magnification to determine the characteristics of the image. Since the image distance is negative, the image is virtual. Since the magnification is less than 1, the image is smaller.
Therefore, the best description of the image is upright, smaller, and virtual.
To know more about image
https://brainly.com/question/12494813
#SPJ1
Answer:
upright, smaller virtual
Explanation:
Before taking a personality test, Jackie sets her mind on growth. How might this affect her understanding of the test?
Choose two anSwers-
1.She will score high in the areas she chooses to.
2.She will respond based on what's best in her desired career path.
3. She will think of the results as an opportunity to find joy.
4. She will identify areas for self- development in her results.
Answer:
The two answers that are likely to be true are:
She will think of the results as an opportunity to find joy.
She will identify areas for self-development in her results.
By setting her mind on growth, Jackie is likely to approach the personality test with a positive and open mindset. This can lead to the following outcomes:
She will think of the results as an opportunity to find joy: Jackie may view the test results as a chance to discover aspects of her personality that bring her joy and satisfaction. She might focus on finding strengths and positive qualities that can contribute to her personal and professional growth.
She will identify areas for self-development in her results: Rather than viewing the test results as fixed labels or limitations, Jackie is likely to see them as valuable feedback for self-improvement. She may actively seek out areas where she can further develop her skills, knowledge, and personality traits to enhance her personal and career growth.
It's important to note that the other options listed in the question (1. She will score high in the areas she chooses to and 2. She will respond based on what's best in her desired career path) are not directly related to having a growth mindset. They suggest a more biased or strategic approach to the test, which may not align with the concept of growth and self-improvement.
dx=7.14 m and dy=-7.55 m find the direction
Explanation:
arctan ( -7.55/7.14) = - 46.6 degrees ( or 313.4 degrees)
1 Consider a ring, sphere and Solidey clinder all with the same mass. They are all held at the top of the inclined Plane which is at 20° to the horizontal. the top of the inclined Plane is 1m high. The shapes are released simultaneously and allowed to roll down the inclined plane. Assume the abjects roll with out slipping and that they are all made from the same material. Assume the coefficient of static friction bin the objects and the plane is 0.3.
A) which shapes have the greater moment of inertia ?
B) workout what order they would get to the bottom of the Slope!
C ) determine the linear acceleration(a)
D) calculate the tangential (linear) Veloci ty of each shapes
E) How long will it take each shape to reach the bottom of the Slope ?
I give you 100 coin please help me
-
Which of the following statements regarding VDGS
Systems are true? (Select ALL that are true.)
You can guess what type of aircraft is being parked.
If the system stops the aircraft, you can just manually continue to park it.
You do not need to investigate the reason for the stop.
Anyone can give the "Stop" signal if a threat to the safety of the aircraft is
observed.
You must power on and check the system before arrival.
A qualified agent must man the Emergency stop.
The true statements regarding VDGS Systems are you must power on and check the system before arrival and a qualified agent must man the Emergency stop.
What is VDGS?VDGS stands for Visual Docking Guidance System. It is a technology used in airports to assist pilots in parking their aircraft at the gate by providing visual cues and guidance through the use of lights and/or displays.
The following statements regarding VDGS Systems are true:
You must power on and check the system before arrival.A qualified agent must man the Emergency stop.Learn more on VDGS here https://brainly.com/question/26507705
#SPJ1
What is the S-P difference (sec)?
What is the amplitude (mm)?
What is the distance (km)?
What is the magnitude (M)?
(a) The S-P difference of the wave is determined as is 40 sec.
(b) The amplitude of the wave is determined as is 10 mm
(c) The distance of the wave is determined as is 380 km
(d) The magnitude of the wave is determined as is 4.5
What is amplitude of a wave?The amplitude of a wave is the maximum displacement or distance that a wave moves from its rest position to its crest (the highest point) or trough (the lowest point). In other words, it is the measure of the strength or intensity of a wave.
Question 1:
From the graph, the S-P difference, that is between S and P = 40 s - 0 s
= 40 s
Question 2:
The distance (km) corresponding to 40 sec is 380 km.
Question 3:
The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.
Question 4:
The corresponding magnitude of the wave is 4.5.
Learn more about amplitude here:
https://brainly.com/question/3613222
#SPJ1
b) A rocket initially moving at v0=3.5 km/s in space fires its engines. The initial mass of rocket is m0=200,000 kg and the final mass of the rocket is m=20,000 kg. If the exhaust velocity is ve=5.2 km/s, calculate the final speed in km/s.
The final speed of the rocket is -11.8 km/s.
What is the final speed of the rocket?The final speed of the rocket is calculated by applying the principle of conservation of linear momentum.
m0v0 = mv + (m0 - m)ve
where;
m0 is initial massv0 is the initial speedve is exhaust velocityThe final speed of the rocket is calculated as;
200,000 kg x 3.5 km/s = 20,000 kg x v + (200,000 kg - 20,000 kg) x 5.2 km/s
700,000 = 20,000v + 936,000
v = -236,000/20,000
v = -11.8 km/s
Learn more about final speed here: https://brainly.com/question/25905661
#SPJ1
which of the following best describe the weather conditions at location B
The best description on the weather conditions at location A and B is :It is warmer at position A than at position B.
Therefore Option (D) is correct
What is meant by weather conditions?Weather condition is described as the regional weather during a defined time period from one up to several weeks describing typical weather phenomena, such as a series of thunderstorm in hot summer, foggy month in autumn or other weather conditions which are typical for a specific region and/or season.
From the given image, a warm front is being shown. Here, the region comprising letter A is the warm zone and the region above the front comprising the letter B indicates a cold zone. The position A forms a low-pressure zone, so it is comparatively warmer than the position B.
Learn more about Weather condition at:
https://brainly.com/question/29332171
#SPJ1
#complete question:
Which of the following statements best describes the weather conditions at positions A and B shown below?
A. It is raining at position A and clear at position B.
B. It is cloudy at position A and clear at position B.
C. It is cooler at position A than at position B.
D. It is warmer at position A than at position B.
There are two major types of data storage: Hard copy (paper) and digital storage. Both have strengths and weaknesses. Which do you think is better and why?
Your response should be 3-5 sentences long
Answer:
Both hard copy and digital storage have their own advantages and disadvantages, and which one is better largely depends on the specific use case and personal preferences. Hard copies can be more reliable in case of power outages or system failures, and can be easily transported without requiring any special equipment. Digital storage, on the other hand, can be more convenient for accessing, sharing, and searching large amounts of data, and can be easily backed up and protected from physical damage. Ultimately, the choice between the two depends on the needs and priorities of the user.
Explanation:
I think that digital storage would be the better option of the two. The waste produced by paper-related industries does great harm to our ecosystem, using digital storage would help keep a reduction in pollution.
Also, having a hard copy paper, you might misplace and lose it. If you use digital storage you have easy access and retrieval. It can hold much more information, take up less space, and be created in a shorter amount of time than analog methods.
A proton, moving with a velocity of viî, collides elastically with another proton that is initially at rest. If the speed of the initially moving proton is 1.90 times the speed of the initially at rest proton, find the following.
(a) the speed of each proton after the collision in terms of vi
(b) the direction of the velocity vectors after the collision
Answer:
We can approach this problem using the conservation of momentum and the conservation of kinetic energy.
Conservation of momentum:
The momentum before the collision is given by:
p1 = m1v1 = m1viî
where m1 is the mass of each proton (which we assume to be the same) and v1 is the velocity of the initially moving proton.
The momentum after the collision is given by:
p2 = m1v1' + m1v2'
where v1' and v2' are the velocities of the two protons after the collision.
Since the collision is elastic, the total momentum is conserved:
p1 = p2
m1viî = m1v1' + m1v2'
We can simplify this equation by dividing both sides by m1:
viî = v1' + v2'
Conservation of kinetic energy:
The kinetic energy before the collision is given by:
K1 = (1/2)m1 We need the value of the velocity v1, which is not given in the problem statement.
Which word best completes the analogy?
Health-related fitness is to health as skill-related fitness is to _____.
A.
exercise
B.
wellness
C.
performance
D.
fitness
The word that best completes the analogy Health-related fitness is to health as skill-related fitness is to is option C which is performance.
Performance explained.
In health and fitness, performance refers to an individual's ability to carry out physical activities or exercises with efficiency and effectiveness, which are key components of skill-related fitness. Good performance in health and fitness can be measured by various parameters, such as strength, endurance, flexibility, balance, coordination, and speed. For example, a good performance in running can be measured by the ability to run a certain distance in a shorter time or maintaining a specific pace for a longer time. Similarly, a good performance in weightlifting can be measured by the ability to lift a certain weight with proper form and technique.
In general, good performance in health and fitness is associated with better overall physical health, reduced risk of chronic diseases, and improved quality of life.
Learn more about performance below.
https://brainly.com/question/27943755
#SPJ1
1.5 Find the center of gravity of a 100 mm x 150 mm x 30 mm T-section. H 150 mm -100 mm- G D BI 30 mm E -30 mm Figure 1.5 1.
Answer:
Explanation:
que ricos puntitos
1. Two resistors R₁ (12 ohm) and R₁ (24 ohm) are
connected in series across a 6.0 V battery
of negligible internal resistance.
Draw a circuit diagram (to the right) and calculate:
The total resistance of the two resistors:
The total current flowing in the circuit:
The current flowing in R₁
The current flowing in R2
The total power consumed by R₁ and R₂
11
Here's the circuit diagram:
```
+---R₁---R₂---+
| |
- -
(6V) ( )
|
|
|
|
|
|
|
( )
-
```
Calculations:
1. The total resistance of the two resistors:
R_total = R₁ + R₂
= 12 ohm + 24 ohm
= 36 ohm
Answer: 36 ohm
2. The total current flowing in the circuit:
I = V / R_total
= 6.0 V / 36 ohm
= 0.167 A
Answer: 0.167 A
3. The current flowing in R₁:
I₁ = V / R₁
= 6.0 V / 12 ohm
= 0.5 A
Answer: 0.5 A
4. The current flowing in R₂:
I₂ = V / R₂
= 6.0 V / 24 ohm
= 0.25 A
Answer: 0.25 A
5. The total power consumed by R₁ and R₂:
P = I² * R_total
= (I₁ + I₂)² * R_total
= (0.5 A + 0.25 A)² * 36 ohm
= 0.1875 * 36 ohm
= 6.75 W
Answer: 6.75 W
In a parallel circuit, the current amplitude is the same through the inductor branch, the capacitor branch, and the resisitor branch. For this circuit, L =
20.0 mH and C = 10.0 mF.
a. What is the source angular frequency?
b. What is the resistance of the resistor?
part a.
The source angular frequency is 2.23 rad/s.
part b.
The resistance of the resistor is 4.46 Ω.
How do we calculate?The source angular frequency is given as:
ω = 1/√(LC)
where = is the inductance,
C = capacitance,
ω= angular frequency.
Substituting the values, we have:
ω = 1/√(20.0 mH x 10.0 mF) = 1/√(0.2) = 1/0.447 = 2.23 rad/s
part b.
We use the impedance in a parallel RLC circuit:
Z = R/(1 - ω^2LC)
impedance of the inductor branch is given as:
Z = jωL
impedance of the capacitor branch :
Z = -j/(ωC)
impedance of the resistor branch :
Z = R
We set all the impedances together at:
jωL = -j/(ωC) = R
We now solve for
R = ωL/ωC
R = = (2.23 rad/s)(20.0 mH)/(10.0 mF)(2.23 rad/s)
R = 4.46 Ω
Learn more about impedances at:
https://brainly.com/question/24225360
#SPJ1
5. An elephant has weight of 48000N and exerts pressure of 60000 Pa on the ground. What is the area of the elephant's feet in contact with the ground?
a. 1.25 m^2
b. 0.8 m^2
c. 2.0 m^2
d. 8.0 m^2
Answer:
A 1.25 m²
Explanation:
A thin beam of light falls on mirror 1 as shown in the diagram below. four P.Q.Rands are placed in front of mirror 1 and mirror 2. Mirror 2 J|||||| RE Nanda wants to find out on which tikely box in the diagram in the beam to fall after reflecting off mirrov 1 and mirrov 2 List the steps that he should Follow in the correct order.
The steps assume that the mirrors and boxes are arranged in a simple, two-dimensional configuration.
The steps to be followedThe steps to be followed are;
Determine the angle of incidence of the beam of light on mirror 1. This can be done by drawing a line perpendicular to the mirror at the point where the beam of light hits the mirror and measuring the angle between this line and the incident beam of light.Use the law of reflection to determine the angle of reflection of the beam of light from mirror 1. This angle will be equal to the angle of incidence.Use the properties of parallel lines and angles to determine the angle of incidence of the beam of light on mirror 2. This can be done by noting that mirror 2 is parallel to mirror 1 and that the angle of incidence of the beam of light on mirror 2 will be equal to the angle of reflection of the beam of light from mirror 1.Use the law of reflection again to determine the angle of reflection of the beam of light from mirror 2. This angle will be equal to the angle of incidence of the beam of light on the likely box.Use the properties of parallel lines and angles again to determine the angle of incidence of the beam of light on each of the boxes in the diagram. The box that has an angle of incidence equal to the angle of reflection of the beam of light from mirror 2 is the likely box where the beam of light will fall.Learn more on reflection of mirror here https://brainly.in/question/54972410
#SPJ1
what happens according to newton if you let an untide ballon go?
What is a hydrogen displacement?
A chemical process known as hydrogen displacement occurs when hydrogen gas is replaced or displaced by another element or molecule.
It results from a number of reactions, most of which involve a reactive metal or substance. A metal reacting with an acid can displace hydrogen atoms of the acid, resulting in the formation of a salt and the release of hydrogen gas as an example.
Another example is the interaction of a metal with water molecules, which displaces hydrogen atoms and results in the formation of metal hydroxide and hydrogen gas. Chemistry studies hydrogen displacement reactions in great detail because they are important for understanding the reactivity of various compounds. They shed light on the behavior of elements, how well they can replace hydrogen, and how new compounds are formed.
Learn more about hydrogen displacement, here:
https://brainly.com/question/20344192
#SPJ5
A blue train of mass 50 kg moves at 4 m/s toward a green train of 30 kg initially at rest. The trains collide. After the collision the green train moves with a speed of 3 m/s. What is the final momentum of the blue train?
A. 200 kgm/s
B. 20 kgm/s
C. 110 kgm/s
D. 90 kgm/s
Answer:
C. 110 kgm/s
Explanation:
Law of Conservation of Momentum states that total momentum before the collision must equal total momentum after the collision.
Momentum = p = mv
x = final velocity of the blue train
(50 kg)(4 m/s) + (30 kg)(0 m/s) = (50 kg)(x) + (30 kg)( 3 m/s)
200 kg·m/s + 0 = (50 kg)(x) + 90 kg·m/s
50 kg(x) = 110 kg·m/s
x = (110 kg·m/s)/(50 kg) = 2.2 m/s
p-final (blue train) = (50 kg)(2.2 m/s) = 110 kg·m/s
Answer:
According to the law of conservation of momentum, the total momentum of the system before and after the interaction must be equal.
The total initial momentum of the system is:
P_initial = 50 * 4 + 30* 0 = 200kgm/s
The total final momentum of the system
let the velocity of the blue train is=v
P_final = 30* 3 + 50* v = 200
after solving v=2.2m/sec
the momentum of blue train will be= 50* 2.2=110kgm/s
What is the difference between analog signal and digital signal. Explained in essay form.
A continuous signal that changes in frequency and amplitude over time is referred to as an analogue signal. A digital signal one can only take on a small number of values and is commonly represented by 0s and 1s.
Being able to take on any value within a continuous range of values makes it the perfect choice for simulating physical phenomena like temperature, sound, and light. Analogue signals include things like radio waves, vinyl records, and conventional telephone networks. Modern communication and computing systems use digital signals instead of analogue ones because they can be transferred and processed more effectively and are less prone to noise. Computer networks and digital cameras are few examples of digital signals.
To know more about Computer networks, here
brainly.com/question/14276789
#SPJ1
Toy cars of different masses accelerate as they move down a ramp as shown in the figure. A motion sensor is used to measure the speed of each car. It is found that all of the cars have the same speed at the bottom of the ramp. This graph shows how the mass of the car affects the car’s kinetic energy at the bottom of the ramp. Based on the graph, describe the relationship between the mass and the kinetic energy of the car, and then predict, in joules the kinetic energy of a car with a mass of 80 grams.
The Kinetic energy of the car with a mass of 80 grams is 0.40 joules
How do i determine the kinetic energy?From the graph given, we can see that the as the mass increase, the kinetic energy also increase. Thus, we can say that the kinetic energy and mass of the car are in direct proportionality.
Now, we shall obtain the velocity of the car. Details below:
Kinetic energy (KE) = 0.1 JMass of (m) = 20 g = 20 / 1000 = 0.02 KgVelocity (v) = ?KE = ½mv²
0.1 = ½ × 0.02 × v²
0.1 = 0.01 × v²
Divide both side by 0.01
v² = 0.1 / 0.01
Take the square root of both side
v = √(0.1 / 0.01)
v = 3.16 m/s
Finally, we shall determine the kinetic energy of the car of mass 80 grams. Details below:
Mass (m) = 80 g = 80 / 1000 = 0.08 KgVelocity (v) = 3.16 m/sKinetic energy (KE) =?KE = ½mv²
KE = ½ × 0.08 × 3.16²
Kinetic energy = 0.40 joules
Learn more about kinetic energy:
https://brainly.com/question/25959744
#SPJ1
Some people think that we should try to live outside of the Earth (on the Moon, or even on Mars, for example). Write your ideas about this. Will this be possible some day soon? When will this happen? How are we going to live there? What will be different up there?
Living outside the Earth, on the Moon or Mars, is a future possibility with continued research.
Living outside of the earthThe idea of living outside of Earth has been a subject of interest for many years. While it may seem like a daunting task, it is definitely possible. Advancements in technology have made it easier to explore space and even establish human settlements on other planets.
Living on the Moon or Mars would require creating sustainable ecosystems that provide food, water, and oxygen for the settlers. It would also require building living quarters that can withstand the harsh environmental conditions on these planets.
However, we are still a long way from achieving this goal, and it will likely take several decades or even centuries before we can establish a permanent human presence on another planet.
Nonetheless, with continued research and development, we may one day be able to call another planet our home.
More on the earth can be found here: https://brainly.com/question/31064851
#SPJ1
what is the unit of time not based on a heavenly body
A is a sphere that is traveling with velocity of (3,7)m/s and had a mass of 5 kg .it collide with sphere B and both particle move together with velocity of (1,4)m/s after the collision. Sphere B has a mass of 4 kg . Find the velocity of B before the collision
The velocity of sphere B is -1.475 m/s. Which is in opposite direction to the direction of sphere A.
What is velocity?Velocity is the rate of change of displacement.
To calculate the velocity of sphere B before collision, we use the formula below
Formula:
u = [V(M+m)-Mu']/m................... Equation 1Where:
u = Velocity of sphere B before collisionV = Velocity of both particles after collisionM = Mass of sphere Am = Mass of sphereu' = Velocity of sphere B before collisionFrom the question,
Given:
V = 1.4 m/sM = 5 kgm = 4 kgu' = 3.7 m/sSubstitute these values into equation 1
u = [1.4(5+4)-(5×3.7)]/4u = (12.6-18.5)/4u = -5.9/4u = -1.475Hence, the velocity of sphere B is -1.475 m/s.
Learn more about velocity here: https://brainly.com/question/25749514
#SPJ1
Suppose 10.0 g of ice at -10.0C is placed into 300.0 g of water in a 200.0-g copper calorimeter. The final temperature of the water and copper calorimeter is 18.0C.
1) What was the initial common temperature of the water and copper? (Express your answer to three significant figures.)
The initial common temperature of the water and copper is approximately 2.68°C.
To find the hidden typical temperature of the water and copper, we need to use the norm of protection of energy, which communicates that energy can't be made or obliterated, recently moved or changed beginning with one design then onto the following.
The force lost by the ice as it breaks up is identical to the power obtained by the water and the calorimeter. We can impart this using the recipe:
Q_ice = Q_water + Q_calorimeter
where Q_ice is the force lost by the ice, Q_water is the power procured by the water, and Q_calorimeter is the force gained by the calorimeter.
We can determine the power lost by the ice using the recipe:
Q_ice = m_ice * L_f
where m_ice is the mass of the ice and L_f is the force of blend of water, which is 333 J/g.
Q_ice = (10.0 g) * (333 J/g) = 3330 J
We can sort out the force obtained by the water using the condition:
Q_water = m_water * c * (T_f - T_i)
where m_water is the mass of the water, c is the specific power breaking point of water, which is 4.184 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.
Q_water = (300.0 g) * (4.184 J/g°C) * (18.0°C - T_i)
We can figure the force obtained by the calorimeter using the recipe:
Q_calorimeter = m_calorimeter * c_calorimeter * (T_f - T_i)
where m_calorimeter is the mass of the calorimeter, which is 200.0 g, c_calorimeter is the specific force breaking point of copper, which is 0.385 J/g°C, T_f is the last temperature of the water and calorimeter, and T_i is the hidden ordinary temperature of the water and calorimeter.
Q_calorimeter = (200.0 g) * (0.385 J/g°C) * (18.0°C - T_i)
Subbing these circumstances into the norm of conservation of energy, we get:
m_ice * L_f = m_water * c * (T_f - T_i) + m_calorimeter * c_calorimeter * (T_f - T_i)
Tending to for T_i, we get:
T_i = T_f - [(m_ice * L_f)/(m_water * c + m_calorimeter * c_calorimeter)]
T_i = 18.0°C - [(10.0 g) * (333 J/g)/(300.0 g * 4.184 J/g°C + 200.0 g * 0.385 J/g°C)]
T_i = 2.68°C
As needs be, the basic ordinary temperature of the water and copper was 2.68°C (conveyed to three immense figures).
To learn more about temperature, refer:
https://brainly.com/question/31909880
#SPJ1
. When a large truck
hits a small car, the
forces are equal.
• However, the small
.
car experiences a
much greater
change in velocity
much more rapidly
than the big truck.
Which vehicle ends up
with more damage?
Answer:
Car
Explanation:
Based on Newton 2nd law, energy are conserves. Meaning that if the Force is equal, the car with lower mass must be travelling in a much greater acceleration.
F = m.a
where,
a = Δv/Δt
When talking about energy, there are 2 factor: mass and velocity.
The change of Kinetic energy experience by the car is
ΔEk = 1/2.m.Δv²
Eventhough the car has smaller mass, notice that the velocity will be squared. In this case the velocity is the a more dominant factor. It means that energy absorbed by the car is much larger.
state the energy transfer that takes place as the ball changes shape during the contact between the racquet and the ball
When the ball hits the racquet, it gets squished, and it gains elastic energy, since it is compressed.
What is the S-P difference (sec)?
What is the amplitude (mm)?
What is the distance (km)?
What is the magnitude (M)?
(a) The S-P difference (sec) is 40 sec.
(b) The amplitude (mm) is 10 mm
(c) The distance (km) is 380 km
(d) The magnitude (M) is 4.5
What is the S-P wave difference (sec)?The S-P wave difference (sec) is a measure used in seismology to determine the distance between a seismic station and an earthquake source.
From the graph, the S-P difference, that is between S and P = 40 s - 0 s
= 40 s
The distance (km) corresponding to 40 sec is 380 km.
The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.
The corresponding magnitude of the wave is 4.5.
Learn more about S-P wave difference here: brainly.com/question/15225142
#SPJ1
The graph shows the decay of two different radioactive nuclei, Source A and Source B.
How long does it take Source B to complete two half-lives?
a. 10 s
b. 5 s
c. 40 s
d. 20 s
It takes source B 40 s to complete two half lives.
What is the half life?The half-life of a chemical is the amount of time it takes for half of the atoms in a sample to decay. This concept is widely used to describe how quickly a substance decays radioactively in nuclear physics and radiochemistry. Each radioactive substance has a unique half-life due to the properties of each atomic nucleus.
Looking at the graph, we can see that the half life of the source B is 20s .
Hence the time taken to complete two half lives = 2(20 s) = 40 s.
Learn more about half life:https://brainly.com/question/24710827
#SPJ1
Please answer the correct question and I will give you 50 points
1) Consider a ring, sphere and solid cyclinder all with the same mass. They are all held at the top of an inclined plane which is at 20° to the horizontal. The top of the inclined plane is 1 m high. The shapes are released simultaneously and allowed to roll down the inclined plane. Assume the objects roll without slipping and that they are all made from the same material. Assume the coefficient of static friction between the objects and plane to be 0.3.
A ) calculate the tangential (linear) Velocity of each shapes-
B) determine the linear acceleration(a)
C) which shapes have the greater moment of inertia ?
D) How long will it take each shape to reach the bottom of the Slope ?
E) workout what order they would get to the bottom of the Slope.
A) The tangential (linear) velocity of each shape is:
For the ring: v = rω = 2.41 m/s.
For the sphere: v = rω = 1.57 m/s.
For the solid cylinder: v = rω = 2.41 m/s.
B) The linear acceleration of each shape is:
For the ring: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.191 m/s^2.
For the sphere: α = 2gsinθ/(5r(1 + 0.3)) = 1.176 m/s^2.
For the solid cylinder: α = 2gsinθ/(3r(1 + 0.3) + 2R) = 1.228 m/s^2.
C) The solid cylinder has the greatest moment of inertia.
D) The time taken for each shape to reach the bottom of the slope is:
For the ring: t = 0.576 s.
For the sphere: t = 0.197 s.
For the solid cylinder: t = 0.576 s.
E) The sphere will reach the bottom of the slope first, followed by the ring and the solid cylinder.