Answer:
The study of rocks is called petrology.
The correct answer is B.
Explanation:
All the rocks present in the earth is present during ancient times during the formation of the earth's atmosphere.
Due to the presence in the upper surface of the earth, the color of the rocks is changed.
Hence, the correct answer is B Yes, if the sedimentary rock is moved below Earth’s outer layer and exposed to energy from Earth’s interior, can melt into liquid rock and form igneous rock.
Describe How did the sun form?
The Sun formed about 4.6 billion years ago in a giant, spinning cloud of gas and dust called the solar nebula. As the nebula collapsed under its own gravity, it spun faster and flattened into a disk.
Answer:
in space billons of year ago dust particles together to create solar nebula also the sun made with helium and hydrogen the sun will run out of energyhope it's helpful thanks
difference between saturated unsaturted and supersaturatted
Explanation:
Unsaturated solution: A solution with less solute that completely dissolves without leaving any remaining substance
Saturated solution: A solution with solute that dissolves until it can't dissolve anymore, leaving some of the remaining substance left.
Supersaturated solution: A solution that has more remaining substance left than a saturated solution and tends to crystallize more than a saturated solution.
Where is the friction that allows the skater to complete the move that is occurring in this image?
a girl ice skating
© Wildcow / iStock 2018
The movement of her skirt through the air
The movement of her body through the air
The point of contact between the skates and the ice
The point of contact between the skates and her foot
Answer:
The point of contact between the skates and the ice.
Explanation:
It's obvious because friction is the contact between two surfaces.
N₂O(g) + 3 H₂(g) N₂H4(1) + H₂O(1) AH = -317 kJ/mol
and standard heats of formation:
N₂O(g) +82.1 kJ/mol
H₂O(1) 285.8 kJ/mol.
What is the standard heat of formation of hydrazine (N₂H4(1)) ?
Select one:
O a. 50.9 kJ/mol
O b. - 520.7 kJ/mol
O c. 113.3 kJ/mol
O d. - 50.9 kJ/mol
e. 113.3 kJ/mol
Answer:
A
Explanation:
Recall that ΔH is the sum of the heats of formation of the products minus the heat of formation of the reactants multiplied by their respective coefficients. That is:
[tex]\displaystyle \Delta H^\circ_{rxn} = \sum \Delta H^\circ_{f} \left(\text{Products}\right) - \sum \Delta H^\circ_{f} \left(\text{Reactants}\right)[/tex]
Therefore, from the chemical equation, we have that:
[tex]\displaystyle \begin{aligned} (-317\text{ kJ/mol}) = \left[\Delta H^\circ_f \text{ N$_2$H$_4$} + \Delta H^\circ_f \text{ H$_2$O} \right] -\left[3 \Delta H^\circ_f \text{ H$_2$}+\Delta H^\circ_f \text{ N$_2$O}\right] \end{aligned}[/tex]
Remember that the heat of formation of pure elements (e.g. H₂) are zero. Substitute in known values and solve for hydrazine:
[tex]\displaystyle \begin{aligned} (-317\text{ kJ/mol}) & = \left[ \Delta H^\circ _f \text{ N$_2$H$_4$} + (-285.8\text{ kJ/mol})\right] -\left[ 3(0) + (82.1\text{ kJ/mol})\right] \\ \\ \Delta H^\circ _f \text{ N$_2$H$_4$} & = (-317 + 285.8 + 82.1)\text{ kJ/mol} \\ \\ & = 50.9\text{ kJ/mol} \end{aligned}[/tex]
In conclusion, our answer is A.
Which choice has the least thermal energy
What volume of it must be diluted with water to obtain 500cm 3 of 0.01 molar solution. If the stock solution is 1.0 M?
Answer:
5 cc
Explanation:
.01 M * 500/1000 = .005 M needed
1.0 M * x .005 M
x =.005 liter 5 cc
5cc of 1M dilute to 500 cc
The concentration or volume of a solution can be determined from the molarity and volume of the second solution. The volume the solution of 1 M to prepare 500cm³ of 0.01 molar solution is 5 molar.
What is molarity?Molarity of a solution is its concentration in terms of number of moles per unit volume. Molarity depends on the temperature and amount of solute and solvent as well.
If a solution have M1 molarity and V1 volume and a second solution have M2 volume and V2 volume then the relation between these quantities is written as follows:
M1V1 = M2V2
Given that solution to be prepared has the concentration of 0.01 M and volume of 500 cm³. Then the volume of stock solution with 1.0 M concentration is calculated as follows:
500cm³ × 0.01 M = 1.0 M × V2
V2 = (500cm3 × 0.01 M )/1.0 M
= 5 cm³
Hence, the volume of stock solution is 5 cm³ required for the preparation of 500cm³ of 0.01 molar solution.
To learn more about molarity, find the link below:
https://brainly.com/question/8732513
#SPJ2
Is Fe^+2 the same ion as Fe^2+?
Yes, it doesn't matter if you put the number first or the sign first therefore... +2 = 2+
No, Fe^+2 is a cation and Fe^2+ is an anion
Answer:
It doesn't matter because either or it's still a cation because its positive
Understanding the theory of plate tectonics can help people better understand Earth
movements. How can knowledge of plate tectonics help people living in areas prone to
earthquakes and volcanic eruptions?
Understanding the theory of plate tectonics can make people more prepared if a natural disaster occurs. By understanding the theory of tectonic plates, you can possibly predict when the next tectonic-plate related natural disaster will occur.
What type of charge do electrons have?
negative charge
positive charge
no charge
atomic charge
Answer:
negative charge
Explanation:
Neutrons have no charge, protons have positive charge, and electrons have a negative charge
The question is in the attached screenshot. Thanks a lot
Answer:
your welcome
Explanation:
The diagram displays the concentration of products (blue) and reactants (red) over time for a chemical reaction.
Which statement is true?
Reactant concentration is always decreasing.
Product concentration is always increasing.
Reactant and product concentrations are never equal.
As time goes on, reactant and product concentrations become balanced.
Answer:
D. As time goes on, reactant and product concentration become balanced.
Explanation:
I believe this is correct.
compare the boiling point of water at sea leavel to the boiling point in denver (altitude = 1 mile) Explain
Answer:
boiling point decreases in denver
Explanation:
in higher places
theres less atmospheric pressure
it takes less energy to bring water to the boiling point.
Less energy means less heat
which means water will boil at a lower temperature
wonderopolisorg
1. A weather balloon with a volume of 2000L at a pressure of 96.3 kPa rises and the pressure
decreases to 60.8kPa. Assuming there is no change in the temperature or the amount of gas,
calculate the weather balloon's final volume.
Answer:
3167 .8 liters
Explanation:
P1 V1 = P2 V2
96.3 * 2000 = 60.8 * V2 solve for V2 =3167.8 l
A constant volume of oxygen is heated from 100oC to 185 oC. The initial pressure is 4.1 atm. What is the final pressure?
Therefore, the final pressure of the oxygen is 5.51 atm.
How is the ideal petrol rule applied in real-world situations?Let's say an engineer wants to keep 500 g of oxygen at 1 atm and 125 degrees Fahrenheit in a container. The Ideal Gas Law is used to calculate the required capacity of a container before construction can begin.
Assuming that the oxygen behaves as an ideal gas and the volume is constant, we can use the ideal gas law to solve for the final pressure.
The ideal gas law states that:
PV = nRT
where:
P = pressure
V = volume
n = number of moles
R = gas constant
T = temperature
Since the volume is constant, we can rewrite the ideal gas law as:
P1/T1 = P2/T2
where:
P1 = initial pressure
T1 = initial temperature
P2 = final pressure
T2 = final temperature
We can plug in the given values and solve for the final pressure:
P1/T1 = P2/T2
4.1 atm / (100 + 273) K = P2 / (185 + 273) K
P2 = (4.1 atm / 373 K) * (185 + 273) K
P2 = 5.51 atm
To know more about pressure visit:-
brainly.com/question/18431008
#SPJ1
In the reaction 3 O2 --> 2 O3, how many grams of O3 will be formed from the reaction of 100 g of O2?
a. 67 g
b. 133 g
c. 50 g
d. 100 g
Answer:
a. 67
Explanation:
3mol O2 = 2mol O3
1mol O2 = 2/3 mol O3
100g = 2/3 × 100 = 67
What is the total energy required to break all the bonds in 1 mol hexane, c6h14
The enthalpy of formation or the total energy required to break all the bonds in 1 mol hexane and has a value of -198.67 kJ.
What is the energy of bond breaking?The energy of bond breaking is the energy required to break all the bonds in 1 mole of a substance.
This energy is also the energy required to form the bonds known as enthalpy of formation of that substance.
Therefore, the total energy required to break all the bonds in 1 mol hexane is known as it enthalpy of formation and has a value of -198.67 kJ.
Learn more about enthalpy of formation at: https://brainly.com/question/15094217
#SPJ1
Explain why the chemical properties of Mg 24 12 and Mg 26 12 are the same
Which type of science is the study of living things and living systems?
A. Life science
B. Physical science
C. Earth science
D. Space science
Which pair of formulas represents two compounds that are electrolytes?
C5H12 and CH3OH
HCl and NaOH
HCl and CH3OH
C5H12 and NaOH
The pair of formulas represents two compounds that are electrolytes are HCl & NaOH.
What are electrolytes?Electrolytes are the solutions which contains positive or negative ions in it as a result of which it conducts electricity.
C₅H₁₂ & CH₃OH are not electrolytes as they will not dissociate into their respective ions.HCl & NaOH both are electrolytes as they dissociate into their ions in the solution form.Among HCl & CH₃OH, only HCl is a electrolyte and methanol is a non electrolyte.Among C₅H₁₂ & NaOH, NaOH is a electrolyte and C₅H₁₂ is a non electrolyte.Hence pair of electrolytes are HCl & NaOH.
To know more about electrolytes, visit the below link:
https://brainly.com/question/11179867
#SPJ1
Convert the following 59m to nm
Explanation:
[tex]1m = {10}^{ 9} nm[/tex]
[tex]59m = 59 \times {10}^{9} nm[/tex]
I hope it helped you
5.9 × 10⁹
Explanation:
1m = 10^-9 nm
=5.9 × 10⁹
=5.9 × 1 000 000 000
=5 900 000 000 nm
=5.9 ×10⁹
Calculate the root mean square velocity, in m/s, of carbon dioxide molecules at 100.0
Answer:
459.8m/s
Explanation:
T=Temperature in Kelvin
M=molar mass in kg/mol
Molar mass of CO2,
mm=44.01g/mol
=0.04401kg/mol
T =100.0C
= (100.0 +273) K
=373K
So,
vrms= sqrt(3×R×T/M)
vrms=sqrt(3×8.314×373.0/0.04401)
=459.8m/s
Bonding with intermolecular forces:
1.) is CH3I a hydrogen bonding? yes or no?
2.) is CH3I dipole-dipole interactions? Yes or no?
3.) is CH3I a london dispersion forces? Yes or no?
Answer:
1. yes
2. yes
3. no
hope this helps
sorry if I am wrong
If a space rover has a mass of 3900 kg on earth then what is its mass when it lands on mars?
Answer:
390, the force of gravity is 10 N on Earth, so you would divide 3900 by 10
Explanation:
The mass of the space rover will remain constant but its weight will change.
What is Mass?Mass defines the amount of matter present in any object or body. It is also a measure of body's inertia.
Given is a space rover that has a mass of 3900 kg on earth.
Mass of an object is the sum of the masses of all the individual masses of its constituents. Mass of an object always remains constant. Anywhere in the universe, the mass of body cannot change. Although, if we talk about the mass of body as its velocity approaches the speed of light, the mass of body changes according to the general relativity but that is not the case here. However, weight of the object say space rover will be different as it depends upon the acceleration due to gravity (g) on mars. At mars -
Acceleration due to gravity [g] = 3.72 m/s²
Mass of space rover [M] = 3900 Kg [remain same]
Weight of space rover [W] = Mg = 3900 x 3.72 = 14508 Kg
Therefore, the mass of the space rover will remain constant but its weight will change.
To solve more questions on Mass and Weights, visit the link below-
https://brainly.com/question/18938015
#SPJ2
Which scenario would adhere to the law of conservation of energy?
Examples of scenarios that would adhere to the law of conservation of energy are as follows:
In a loudspeaker, electrical energy is converted into sound energy.In a microphone, sound energy is converted into electrical energy.In a generator, mechanical energy is converted into electrical energyWhat is law is conservation of energy?The law of conservation of energy states that energy cannot be created nor destroyed but is conserved when it is transferred from one form to another.
The law of conservation of energy is obeyed by majority of natural and artificial systems. For example;
In a loudspeaker, electrical energy is converted into sound energy.In a microphone, sound energy is converted into electrical energy.In a generator, mechanical energy is converted into electrical energyLearn more about law of conservation of energy at: https://brainly.com/question/20971995
Answer:
Answer is D on edge 2022
Explanation:
How many grams of KBr are dissolved in 92.7 mL of a 0.955 M solution? Show your work.
Answer:
10.5g of KBr
Explanation:
molarity = moles of solute / litres of solution
we are given the volume of the solution in milliliters but the formula uses litres so we have to convert
to convert to liters we divide the number of milliliters by 1000 ( because 1 liter has 1000 milliliters. )
so liters of solution = 92.7/1000 = 0.0927 L
we can now plug in what we are given and solve for moles of solute
recall molarity = moles of solute / litres of solution
molarity = 0.955M and liters of solution = 0.0927L
so [tex]0.955M=\frac{moles.of.solute}{0.0927L}[/tex]
multiply both sides by 0.0927
we're left with moles of solute = 0.0885285 moles
Finally we must convert moles to grams
Molar mass of KBr = 39.0983 + 79.904 = g/mol
Using dimensional analysis we get [tex]\frac{0.0885285molKBr}{} *\frac{119.002g}{1molKBr}[/tex]
the mol KBr cancel out on both sides and we get [tex]0.0885285 *119.002g[/tex] which is equal to 10.5g (rounded)
So we can conclude that 10.5g of KBr is dissolved in 92.7mL of a 0.955M solution.
Which of the following compounds' solubility will not be affected by a low pH in solution?
O AgBr
O NICO3
O CO(OH)2
O PbF2
O Cus
The compound solubility which will not be affected by a low pH in solution is AgBr.
What is pH?pH is a measure of the acidity or basicity of any solution and according to the pH scale 0 to 6.9 shows the acidity, 7 is neutral and 7.1 to 14 shows the basicity of any solution.
AgBr is sparingly soluble in water and not soluble in acids, so if we low the pH of the solution towards the acidity its solubility not affected.NiCO₃ is a basic salt and and shows solubility in the acidic medium so change in pH will affect its solubility.Co(OH)₂ it is also a basic compound and shows its solubility in the acidic medium and get affected when change in pH takes place.PbF₂ is a strong base and also shows solubility in the acidic medium easily, so get affected when change in pH takes place.In CuS, sulphide is basic ion and whole compound shows solubility in the acidic medium and get affected when low pH of solution takes place.AgBr is not affected by a low pH in solution.
To know more about solubility, visit the below link:
https://brainly.com/question/23946616
I really need an answer by tonight!
Water circulation created by prevailing wind systems. The Gulf Stream is an example.
The length of open sea over which wind can blow steadily to create waves.
The amount of dissolved salt in a liquid.
The distance from the crest of one wave to the crest of another.
Water circulation created by differences in density.
This is what moves forward and through a wave.
The cyclical process of the changing state and movement of water around the Earth through evaporation, condensation, and precipitation.
As the amount of salt in water increases, the density of the water _________.
The type of energy possessed by moving water.
The rising of ocean water bringing nutrients up from the deep
1.
The water cycle
2.
vapor transport
3.
salinity
4.
increases
5.
decreases
6.
surface currents
7.
Coriolis Effect
8.
deepwater currents
9.
trough
10.
wave period
11.
wavelength
12.
water molecules
13.
energy
14.
crest
15.
fetch
16.
electrical
17.
kinetic
18.
downwelling
19.
upwelling
The water cycle iss a process which helps to circulate and replenish water on earth.
What is hydrology?Hydrology is the scientific study of water bodies , the changes that occur in them as well as the various features and behavior of water bodies such as oceans and rivers.
Water circulation created by prevailing wind systems. The Gulf Stream is an example up of the Coriolis effect.
The length of open sea over which wind can blow steadily to create waves is called fetch.
Salinity is the amount of dissolved salt in a liquid
The distance from the crest of one wave to the crest of another is called wavelength
Water circulation created by differences in density deepwater currents
Energy is what moves forward and through a wave.
The cyclical process of the changing state and movement of water around the Earth through evaporation, condensation, and precipitation is called water cycle.
As the amount of salt in water increases, the density of the water increases.
The type of energy possessed by moving water is called kinetic energy.
The rising of ocean water bringing nutrients up from the deep us called upwelling.
Therefore, the water cycle helps to circulate and replenish water on earth.
Learn more about water cycle at: https://brainly.com/question/2164391
pls help mee with this
Answer:
C. Shield Volcano
Explanation:
Flow after flow pours out in all directions from a central summit vent, or group of vents, building a broad, gently sloping cone of flat, domical shape, with a profile much like that of a warrior's shield.
How much more would a 20.0 gallon tank for propane
(C3H3) weigh if it was originally empty, 1 gallon = 3.8 L, but now has a
pressure of 2.4atm at a temperature of 27 Celsius?
Give your answer in grams.
Answer: 20 + 1 + 3.8 + 2.4 +27 = 54.2
Explanation: 20 gallons plus 1 gallon plus 3.8 plus 2.4 plus 27 equals to a total number of 54.2 gallons for the propane.
Which is a property of acids in aqueous solutions?
O They feel soapy.
O They taste bitter.
They increase the concentration of H* ions.
O They decrease the concentration of H* ions.
Answer:
2 and 3
Explanation:
acids are known for being H+ donors so they increase concentration of h+ ions