Answer:
by reducing friction
Explanation:
By reducing friction, a machine can be made more efficient. Friction causes energy loss in a machine, which reduces its efficiency. By reducing friction, less energy is wasted as heat, and more energy is utilized for the intended purpose of the machine.
a double-slit with slit a width of 0.15 mm is placed 2.3 m from a viewing screen. how far is the first dark fringe from the middle screen when a light of wavelength 450 nm falls on the double-slit?
The first dark fringe is located approximately 7.35 mm from the central maximum on the screen.
The location of the first dark fringe can be found using the formula:
y = (mλD) / d
where y is the distance from the central maximum to the first dark fringe, m is the order of the fringe (m = 1 for the first dark fringe), λ is the wavelength of light, D is the distance from the double-slit to the screen, and d is the slit spacing (which is the sum of the slit width and the distance between the centers of the two slits).
The slit width is given as 0.15 mm = 0.00015 m, and the wavelength of light is 450 nm = 0.00045 m. The distance from the double-slit to the screen is 2.3 m.
To find the slit spacing, we need to know the distance between the centers of the two slits. If the double-slit is a single piece with two slits, the distance between the centers of the slits is usually given as the width of the slits plus the distance between them. If this information is not provided, we can assume that the distance between the centers of the slits is approximately equal to the width of each slit. Therefore, we can estimate the slit spacing as:
d ≈ 2 × 0.00015 m = 0.0003 m
Substituting the values into the formula, we get:
[tex]y = (1 × 0.00045 m × 2.3 m) / 0.0003 m[/tex]
y ≈ 7.35 m
To know more about "double-slit here
https://brainly.com/question/30646734
#SPJ4
a supernova explosion of a 3.2 x1031 kg star produces 1.0 x1044 j of energy. (a) how many kilograms of the star's mass are converted to energy in the explosion?
The amount of the star's mass converted to energy in the explosion is 1.11 x 10^27 kg.
Calculating energy:
The mass-energy equivalence equation is used to calculate the mass that is converted to energy during a supernova explosion of a 3.2 x 10^31 kg star, producing 1.0 x 10^44 J of energy.
According to Einstein's mass-energy equivalence equation: E = mc² where, E = energy, m = mass, and c = speed of light This equation expresses the relationship between the mass of an object and the amount of energy that can be released from it.
So, to determine the mass that is converted to energy during the supernova explosion, we need to rearrange the equation as m = E/c². Now we have the following data: E = 1.0 x 10^44 Jc = 3.0 x 10^8 m/s² (speed of light). Substitute these values into the equation to get: m = E/c²m = (1.0 x 10^44 J)/(3.0 x 10^8 m/s)²m = 1.11 x 10^27 kg
Therefore, the supernova explosion of a 3.2 x 10^31 kg star converts 1.11 x 10^27 kg of its mass to energy.
To know more about supernova explosions, visit:
https://brainly.com/question/14018571
#SPJ11
6. a 21.00-kg child initially at rest slides down a playground slide from a height of 3.40 m above the bottom of the slide. if her speed at the bottom is 2.30 m/s, how much energy is lost due to friction?
If a 21.00-kg child slide from a height of 3.40 m above the bottom of the slide and her speed at the bottom is 2.30 m/s, the amount of energy lost due to friction is 644.18 J.
The potentiаl energy of аn object depends on the locаtion of the object from the bottom reference floor аnd the mаss of the object. The аmount of energy contаins by the object аt аny height is known аs the potentiаl energy of thаt object.
We are given:
The energy of the child at the upper end of the slide is,
[tex]E_{u}[/tex] = mgh
Substitute the values in the above equation
[tex]E_{u}[/tex] = 21 kg × 9.8 m/s2 × 3.40 m
= 699.72 J
The energy at the bottom of the slide is,
[tex]E_{b}[/tex] = [tex]\frac{1}{2}(mv^{2})[/tex]
Substitute the values in the above equation.
[tex]E_{b}[/tex] = [tex]\frac{1}{2}(21.2.30^{2})[/tex]
[tex]E_{b}[/tex] = 55.54 J
The energy lost due to friction is,
[tex]E_{f}[/tex] = [tex]E_{u}[/tex] - [tex]E_{b}[/tex]
Substitute the values in the above equation
[tex]E_{f}[/tex] = 699.72 - 55.54
[tex]E_{f}[/tex] = 644.18 J
Thus, the energy lost due to friction is 644.18 J.
For more information about potentiаl energy refers to the link: https://brainly.com/question/14904642
#SPJ11
A 9.00 kg mass is moving to the right with a velocity of 14.0 m/s. A 12.0 kg mass is moving to the left with a velocity of 5.00 m/s. Assuming that these two balls have a head on collision and stick together, what will be the final velocity of the combination? (3.1 m/s)
Answer:
5.95 m/s to the right
Explanation:
Before the collision, the momentum of the system is given by:
p = m1v1 + m2v2
p = (9.00 kg)(14.0 m/s) + (12.0 kg)(-5.00 m/s)
p = 125.0 kg m/s (to the right)
During the collision, the two masses stick together, so their final velocity will be the same. Let's call this final velocity vf. The momentum of the system after the collision is given by:
p' = (m1 + m2)vf
p' = (9.00 kg + 12.0 kg)vf
p' = 21.0 kg vf
Since momentum is conserved in the collision (there are no external forces acting on the system), we can set p = p' and solve for vf:
125.0 kg m/s = 21.0 kg vf
vf = 5.95 m/s (to the right)
Therefore, the final velocity of the combined masses after the collision is 5.95 m/s to the right.
a wheel of radius r and negligible mass is mounted on a horizontal frictionless axle so that the wheel is in a vertical plane. three small objects of mass im, m, and 2mi respectively are mounted on the rim of the wheel, as shown. if the system is in static equilibrium, what is the value of m in terms of m?
Answer: C) 3M/2
Explanation:
rotational equilibrium at center pivot
mg(R) + Mg(Rcos60°) – 2Mg(R) = 0.
so cos60° = ½ meaning r 3M/2
A wheel of radius r and negligible mass is mounted on a horizontal frictionless axle so that the wheel is in a vertical plane. The value of m in terms of i is m = 2i * r.
The value of m in terms of m, we can use the condition for static equilibrium which states that the sum of all the forces acting on the system must be zero, and the sum of all the torques must also be zero.
Considering the forces acting on the system, we can see that there are only two: the weight of the objects and the tension in the string that connects them to the wheel. Since the system is in static equilibrium, the tension must be equal to the weight of the objects.
Next, let's consider the torques acting on the system. The torques due to weights of the objects are balanced by the torques due to their distances from the axis of rotation. However, the torque due to the tension in the string is not balanced and produces a net torque on the system.
We can calculate the torque due to the tension in the string by multiplying the tension by the radius of the wheel. The torque due to each object can be calculated by multiplying its weight by its distance from the axis of rotation. Since the system is in static equilibrium, the net torque must be zero, which gives us the following equation:
Tension x Radius = (2im) x 2r + m x r - im x r
Simplifying this equation, we get:
Tension x Radius = 4imr + mr - imr
Tension = (5im + m) / r
Since we know that the tension is equal to the weight of the objects, we can equate the tension to the sum of the weights and solve for m:
(5im + m) / r = 5im + m + 2im
m/r = 2im
m = 2i * r
Therefore, the value of m in terms of i is m = 2i * r.
For more such questions on vertical plane
brainly.com/question/30257698
#SPJ11
a parallel-plate capacitor has a plate separation of 4.00 mm. 1) if the material between the plates is air, what plate area is required to provide a capacitance of 3.00 pf? (express your answer to three significant figures.)
To get a capacitance of 3.00 pF with a plate separation of 4.00 mm and air between the plates, the plate area required is 1.062 × 10⁻⁵ m² (to 3 significant figures).
The plate separation, d = 4 mm. The capacitance, C = 3 pF = 3 × 10⁻¹² F.
We need to find the plate area, If the material between the plates is air, then the capacitance of a parallel plate capacitor can be given as:
[tex]$$C = \frac{\varepsilon_0A}{d}$$[/tex]
where, ε0 = permittivity of free space = 8.854 × 10⁻¹² F/m.
Substituting the given values in the above formula, we get:
[tex]$$\begin{aligned}C &= \frac{\varepsilon_0A}{d}\\ 3 × 10^{-12} &= \frac{8.854 × 10^{-12} \text{ F/m} × A}{4 × 10^{-3} \text{ m}}\\ A &= \frac{3 × 4 × 10^{-3} \text{ m} × 8.854 × 10^{-12} \text{ F/m}}{8.854 × 10^{-12} \text{ F/m} × 10^{-12}}\\ &= 1.062 × 10^{-5} \text{ m}^2 \end{aligned} $$[/tex]
Therefore, the plate area required to provide a capacitance of 3.00 pF is 1.062 × 10⁻⁵ m² (to three significant figures).
Learn more about plate area at https://brainly.com/question/30437517
#SPJ11
10. What should be included in your first draft? A. The revised introduction and conclusion b. The changes from proofreading and editing C. The main idea and general support of the idea d. The details of research you've done
11. Use the following passage to answer the question. 1) Water is something most of us take for granted. (2) If we need a cold drink or want to take a shower, water is there. (3) If we want to water our yards or wash the dishes, water is there. (4) For many parts of the world, however, this is not true. (5) Water is not everywhere it's miles away. (6) To get water involves a long walk to and from the source. (7) Traditionally it is the job of women and children to spend their days searching for water. (8) Then, they gather it to bring back to their homes. (9) Sadly , even after that water is found, only some of its clean and safe enough to drink. (10) A number of groups across the globe have spent decades helping people get better access to water. (11) One such organization is called Water.org (12) It was started in 2009 by actor Matt Damon and Gary White , the co - founder of Water partners . (13) What have they accomplished so far Which sentence contains a word that should be capitalized ?
. (9) Sadly, even after that water is found only some of its clean and safe enough to drink . B. (4) For many parts of the world, however, this is not true. C. (10) A number of groups across the globe have spent decades helping people get better access to water. D. (12) was started in 2009 by actor Matt Damon and Gary White, the co-founder of Water partners .
12. Which of these statements should have a question mark added to the end ? A. Television shows usually have 13 episodes per season B. had to wonder why Lisa thought I was upset C. Why did Leonard decide not to go to lecture D. Mom is planning to make pancakes for breakfast
13. What punctuation mark is used to express strong emotions? . Apostrophe B. Quotation mark C. Question mark D. Exclamation point
14. To set off a quote inside a quote, what punctuation mark should you use A. Double quotation marks b. Single quotation marks c. Regular quotation marks d. No quotation marks
15. Which sentence is written correctly ? . My appointment is scheduled for monday, July 4. OB. My appointment is scheduled for monday july 4. C. My appointment is scheduled for Monday july 4. OD. My appointment is scheduled for Monday , July 4.
16. Which of the following sentences would most likely end in an exclamation point? A. The flock of geese was like a checkmark in the sky . Most people think Saturday is the best day to go to the festival . Until Leon gets here , cannot start cooking D. She couldn't believe it; she'd forgotten the cake
17. Which of the following sentences requires a colon to be correct ? A. When she decided to write a letter , she grabbed her pen, paper, stamps, and address book. . The new dessert recipe called for equal parts of sugarcreampeanut butter and crushed pecans . C. In his vacation suitcase, Jonathan packed two pairs of pants, four shirts, his swimsuit , and his favorite pajamas . D. She gathered all of her ingredients to make a smoothie strawberries blueberries , bananas , and yogurt .
18. What should be the first step in the writing process? A. Edit B. Plan . Proofread D. Research
19. Why is it a mistake to overuse exclamation points in your writing? A. It makes it feel as if you're shouting at the reader B. It confuses the reader as to what your main point is. C. It makes your writing lack emotion. D. It confuses the reader as to what your opinion is .
20. Please read the following sentence to answer the question. Sonya, my Mother, owns a bakery , and she makes the best brownies in town. Is the word mother capitalized correctly in the sentence ? . No , because it is a parenthetical element OB . Yes , since Sonya must be capitalized , so should mother C. Yes , since Sonya is the owner of the bakery . No , because a possessive pronoun comes before the word
1) The main idea and general support of the idea
2) Why did Leonard decide not to go to lecture
3) Exclamation point
4) Single quotation marks
5) My appointment is scheduled for Monday , July 4.
6) She couldn't believe it; she'd forgotten the cake
7) She gathered all of her ingredients to make a smoothie strawberries blueberries , bananas , and yogurt .
8) Research
9) It makes it feel as if you're shouting at the reader
10) No , because it is a parenthetical element
What are punctuation marks?Punctuation marks are symbols used in writing to clarify meaning and to indicate the structure and organization of written language. There are several different punctuation marks commonly used in English.
Period (.) - used to mark the end of a sentence.
Comma (,) - used to separate items in a list, or to separate clauses in a sentence.
Semicolon (;) - used to separate two independent clauses in a sentence.
Colon (:) - used to introduce a list, explanation, or quotation.
Question mark (?) - used to indicate a question.
Exclamation mark (!) - used to indicate strong emotion or emphasis.
Quotation marks (" ") - used to indicate direct speech or to enclose a quotation.
Learn more about parts of speech:https://brainly.com/question/12011328
#SPJ1
a weight hanging from a spring will remain hanging until the weight is pulled down and released. when the weight is released the spring will bounce up and down. which of newton's laws explains why the spring will bounce?
This principle can be observed in other everyday scenarios, such as jumping on a trampoline or the recoil of a gun after firing. Newton's Third Law of Motion is a fundamental principle in classical mechanics and explains why the spring will bounce when the weight is released.
The bouncing of the weight when released is explained by Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. When the weight is released, the spring exerts an equal and opposite force on the weight, propelling it upwards and causing it to bounce. This is because when the weight is pulled down, it compresses the spring, storing potential energy. When the weight is released, the spring decompresses and the potential energy is released, propelling the weight in the opposite direction.
To learn more about Newton's Third Law ;
https://brainly.com/question/25998091
#SPJ11
the current through a lightbulb is 2.0 amperes. how many coulombs of leectric charge pass through ther luighbu,kb in one minute?
The current through the bulb is 2.0 amperes. Then the electric charge that passes through Luighbu is 120 Columbs.
Given that the current through a lightbulb is 2.0 amperes. To find the coulombs of electric charge that pass through the light bulb in one minute, we need to know the formula that relates current, time, and electric charge:
Q = It
Where Q is the electric charge (in coulombs), I is the current (in amperes), and t is the time (in seconds).
To convert one minute to seconds, we multiply it by 60. Hence, the time t = 1 minute × 60 seconds/minute = 60 seconds.
So, the electric charge that passes through the light bulb in one minute is given by
Q = It = 2.0 A × 60 s
Q = 120 C
Therefore, the number of coulombs of electric charge that pass through the light bulb in one minute is 120 C.
Learn more about the electric charge at https://brainly.com/question/25923373
#SPJ11
what is the equation of motion of the center of mass of the baton assuming the drum major throws it vertically upward
The equation of motion of the center of mass is given by x = v²/(2g).
The center of mass of an object is a point at which the object can be considered to be a particle with its entire mass concentrated at that point.
When an object moves through space, its center of mass also moves. In this question, we are asked to find the equation of motion of the center of mass of the baton when it is thrown vertically upward by a drum major.
The baton has a mass of m and that it is thrown vertically upward with an initial speed of v. The acceleration due to gravity is g.
We can find the maximum height that the baton reaches using the equation:v² = u² + 2gs
where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and s is the maximum height that the baton reaches.
Since the baton is thrown vertically upward, the initial velocity is v0 = v and the final velocity is zero. So we have:v² = 2gsor:s = v²/(2g).
We can assume that the center of mass moves in a straight line from its initial position to its maximum height and then back down to its original position.
We can find the time taken for the baton to reach its maximum height using the equation:s = ut + (1/2)at²
where u is the initial velocity, a is the acceleration, and t is the time taken. In this case, u = v, a = -g (since the baton is moving upwards), and s = v²/(2g). So we have:v²/(2g) = vt - (1/2)gt²
Solving for t, we get:t = v/gNow we can write the equation of motion of the center of mass of the baton using the equation:x = ut + (1/2)at².
where x is the position of the center of mass, u is the initial velocity (zero), a is the acceleration due to gravity (g), and t is the time taken. So we have:x = (1/2)gt²
x = (1/2)(v/g)² = v²/(2g)The center of mass of the baton moves up to a maximum height of v²/(2g) and then comes back down to its original position.
Hence, The equation of motion of the center of mass is given by x = v²/(2g).
to know more about center of mass refer here:
https://brainly.com/question/28996108#
#SPJ11
a coil is placed in a changing magnetic field and an emf is induced. what happens to the induced emf if the rate of change of magnetic field quadruples?
The induced EMF increases to four times its initial value if the rate of change of the magnetic field quadruples.
Faraday's law of electromagnetic induction specifies that an emf (electromotive force) is induced in a closed conductor or coil whenever there is a change in magnetic flux associated with it.
EMF = − d(ΦB) /dt
ΦB = BAcosθ
This equation suggests that emf is proportional to the rate at which magnetic flux ΦB is changing with respect to time. As a result, if the rate of change of the magnetic field quadruples, the induced EMF increases to four times its initial value.
Learn more about Faraday's law at https://brainly.com/question/1640558
#SPJ11
* what should be used to clean grease or carbon tracks from capacitors or coils that are used in magnetos?
To clean grease or carbon tracks from capacitors or coils that are used in magnetos, use a good quality electrical contact cleaner. Electrical contact cleaners can remove any dirt, grease, or carbon tracks that may have accumulated on the coils and capacitors used in magnetos.
What are capacitors?A capacitor is a device that stores electric charge. It's a passive electrical component that can store energy in an electric field. Capacitors are widely used in electronic circuits for a variety of purposes, including storing electrical energy, separating DC signals from AC signals, and tuning radio frequencies.
A magneto is an electrical generator that converts mechanical energy into electrical energy. It's a type of alternator that is self-contained and does not require a separate power source. Magnetos are used in internal combustion engines, such as those found in automobiles, motorcycles, and aircraft.
To know more about capacitors:
https://brainly.com/question/17511060
#SPJ11
which is the correct unit to represent time?
d) 7m
b) 7m/h
c) 7 s
can the flow near a cylindrical rod of infinite length suddenly set in motion in the axial direction be described by the method in example 4.1-l?
Yes, the flow near a cylindrical rod of infinite length can be described by the method in example 4.1-l. This example uses the method of images to calculate the velocity field of the axial flow around a cylindrical rod of infinite length.
To calculate the velocity field, we need to take the velocity potential of the image sources and double integrate it with respect to the cylindrical coordinates. This will yield the axial velocity.
The image sources are chosen such that the fluid flow is symmetric about the centerline of the rod. Therefore, when the axial flow is suddenly set in motion, the image sources also have a velocity in the axial direction. This velocity will be equal to the velocity of the original flow at the same position.
Once the velocity of the image sources is known, the velocity potential of the entire flow can be calculated. This velocity potential is then used to calculate the velocity field in the axial direction around the rod.
for such more question on cylindrical rod
https://brainly.com/question/13890719
#SPJ11
a 100 ohm resistor is connected in series with a 300 ohm resistor. what is the equivalent resistance?
Answer:
Explanation:
Durante as aulas, os estudantes da 3ª série deveriam escolher uma entre as três atividades físicas possíveis, sendo elas: natação, futsal e dança. Na turma, 25% escolheram dança, 15% escolheram natação, e os outros 24 estudantes escolheram futsal. Podemos afirmar que, nessa turma, existe um total de:
A) 64 alunos
B) 55 alunos
C) 48 alunos
D) 45 alunos
E) 40 alunos
If a 100-ohm resistor is connected in series with a 300-ohm resistor, Then the equivalent resistance of the circuit is 400 ohm.
Resistance in electrical circuits is a measure of how much a component or material opposes the flow of electric current through it. It is denoted by the symbol R and is measured in units called ohms, represented by the Greek letter omega (Ω).
When resistors are connected in series, their resistances add up to give the total or equivalent resistance of the circuit.
Now, to find the equivalent resistance of a circuit with a 100-ohm resistor and a 300-ohm resistor in series, we simply add their resistances together:
Equivalent resistance = 100 ohm + 300 ohm
Equivalent resistance = 400 ohm
Therefore, the equivalent resistance of the circuit is 400 ohms.
To learn more about resistors in a series click:
https://brainly.com/question/9049762
#SPJ2
any helping hand will be appreciated ^^
Psychologists have described the human nervous system as the communication and control center for the body. The nervous system allows us to take in information from the environment, communicate the information to different parts of the body, and coordinate the body's response. The nervous system itself is made up of neurons, or nerve cells, that communicate with each other by receiving and transmitting electrochemical signals, called neurotransmission. All human behavior is made possible by the activity of individual neurons working together in the nervous system. Think about a simple action you do every day, like answering your phone. When you perform this routine act, what are the individual neurons in your nervous system doing to make it possible?
a. Explain how the activity of individual neurons enables you to perform a simple action like answering your phone. Be sure to describe the main parts of a neuron, explain the unique function of each part, and describe how neurons use electrochemical signals for neurotransmission. Include details from class materials, readings, and research on the nervous system to support your discussion.
When you perform a simple action like answering your phone, the activity of individual neurons in your nervous system enables you to take in information from your environment and coordinate a response.
How neurons help us perform activities ?When a neuron receives a signal from a dendrite, it generates an electrical impulse called an action potential, which travels down the length of the axon. At the end of the axon, the electrical signal triggers the release of neurotransmitters, which are chemical messengers that transmit the signal to other neurons or muscle cells.
The neurotransmitters bind to specific receptors on the dendrites of the next neuron or muscle cell, which generates a new electrical signal and starts the process over again. This process of neurotransmission allows for rapid communication and coordination between neurons, which is necessary for even simple actions like answering your phone.
Find out more on neurons at https://brainly.com/question/23136831
#SPJ1
quantum mottle is caused by a. excessive ma-s b. excessive kvp c. insufficient distance d. insufficient light
Quantum mottle, also known as quantum noise, is caused by a lack of photons reaching the image receptor due to insufficient mAs (milliamperage-seconds) in digital radiography. The correct answer is option : a.
This results in a grainy, speckled appearance in the image. Increasing mAs can help to reduce quantum mottle by providing more photons to the image receptor. However, other exposure factors such as kVp and distance also play a role in achieving a diagnostic quality image while minimizing patient dose. Quantum mottle is caused by insufficient mAs in digital radiography, resulting in a grainy, speckled appearance in the image. Correct answer is option: a.
To Know more about Quantum mottle, here
brainly.com/question/15030239
#SPJ4
which of these objects has the smallest radius? which of these objects has the smallest radius? a 1.2msun white dwarf a 0.6msun white dwarf jupiter
Among the given objects, Jupiter has the smallest radius.
The radius is the distance from the center of a circle or sphere to any point on its perimeter or surface, respectively. We can determine the size of the sphere or circle by calculating its radius.
For the given objects, we can compare their radii to determine which one is the smallest.
The objects are as follows:
a 1.2msun white dwarfa
0.6msun white dwarfw Jupiter
We can compare the radius of these objects as follows:
a 1.2msun white dwarf has a radius of 5,400 kilometers.
a 0.6msun white dwarf has a radius of 3,200 kilometers.
Jupiter has a radius of 69,911 kilometers.
From the above comparison, we can see that Jupiter has the smallest radius.
To know more about Jupiter, refer here:
https://brainly.com/question/10906567#
#SPJ11
what is the component vr of velocty vector v along the radial direction from the radar gun to the car
The component vr of velocity vector v along the radial direction from the radar gun to the car is the component of the velocity that is in the direction of the radial line that connects the radar gun to the car.
It can be calculated by taking the dot product of the velocity vector and the unit vector of the radial line.
The unit vector of the radial line is a vector that has a magnitude of one and that is pointing in the direction of the radial line.
The dot product of two vectors is equal to the magnitude of the first vector multiplied by the projection of the second vector on the first vector.
Thus, the component of velocity vr along the radial line is calculated by taking the magnitude of v multiplied by the projection of the unit vector of the radial line on v.
The component vr can be used to determine the speed of the car from the radar gun. The speed of the car is equal to the magnitude of vr divided by the speed of light.
By knowing the speed of the car, the speed limit can be compared to it in order to determine if the car is driving at a legal speed.
to know more about vector refer here:
https://brainly.com/question/24256726#
#SPJ11
Power is The amount of energy transferred per unit time The rate at which work is done Voltage multiplied by current The amount of energy supplied by a battery per unit time
Power is the rate at which work is done. Hence most appropriate option among the four given options is the second option which is "The rate at which work is done".
Power is the rate at which work is done or the rate of energy transfer. It is the amount of energy transferred per unit time. The unit of power is the watt (W), which is defined as one joule per second (J/s).
The definition "the amount of energy transferred per unit time" is incomplete because power can vary over time, and this definition only applies when the energy transfer is constant.
The definition "voltage multiplied by current" gives the electrical power in a circuit, but this definition is specific to electrical power, and power can also be in the form of mechanical, thermal, or other types of energy.
The definition "the amount of energy supplied by a battery per unit time" is a measure of the battery's power output, but it is specific to batteries and does not apply to other sources of power.
Therefore, the most complete and accurate definition of power is "the rate at which work is done."
Learn more about batteries:
https://brainly.com/question/30576475
#SPJ11
what is the definition of current? the amount of charge that flows through a cross-section of wire per unit time. the amount of charge per unit length of wire.
The definition of current is a. the amount of charge that flows through a cross-section of wire per unit time.
Current is he flow of electric charge through a conductor or circuit is known as electric current. In other words, an electric current is defined as the movement of charge carriers (electrons) through a conductor. The SI unit of electric current is the ampere, symbolized as A. Electric current is a scalar quantity that can be positive or negative, depending on the direction of movement of the charge carriers.
The following formula gives the current in a wire: I = ΔQ/Δt, where I is the current, ΔQ is the change in charge, and Δt is the change in time. The electric current is the number of electrons passing through a cross-sectional area of a conductor per unit time. Electric current flows from a higher potential to a lower potential, that is, from a positive to a negative charge carrier.
Learn more about current at:
https://brainly.com/question/30764391
#SPJ11
what average force is required to stop a 900 kg k g car in 7.0 s s if the car is traveling at 90 km/h k m / h ?
The average force required to stop a 900 kg car in 7.0 s if the car is traveling at 90 km/h is -3213 N.
First, we need to convert the speed from km/h to m/s,
90 km/h = 25 m/s (approx)
We can use the equation,
a = (v_f - v_i) / t
where a is the acceleration, v_f is the final velocity (which is zero since the car comes to a stop), v_i is the initial velocity (which is 25 m/s), and t is the time it takes to come to a stop (which is 7.0 s).
Plugging in the values,
a = (0 - 25 m/s) / 7.0 s = -3.57 m/s^2
The negative sign indicates that the acceleration is in the opposite direction to the car's initial velocity.
Now, we can use Newton's second law of motion, which states that force is equal to mass times acceleration,
F = ma
where F is the force required to stop the car, m is the mass of the car (which is 900 kg), and a is the acceleration we calculated earlier.
Plugging in the values,
F = 900 kg x (-3.57 m/s^2) = -3213 N
The negative sign indicates that the force is in the opposite direction to the car's motion.
To know more about force, here
brainly.com/question/10677614
#SPJ4
Kyle, a 90.0 kg
football player, leaps straight up into the air (with no horizontal velocity) to catch a pass. He catches the 0.430 kg
ball precisely at the peak of his jump, when he is 0.589 meters
off the ground. He hits the ground 0.0396 meters
away from where he leapt. If the ball was moving horizontally when it was caught, how fast was the ball traveling?
As Kyle caught the ball, it was moving horizontally at a speed of roughly 0.116 m/s.
What is the formula for momentum change?Momentum, which is the outcome of an object's mass and velocity, is used to represent mass in motion. An impulse is a force that is used to alter an object's velocity. The impulse, J, and the change in momentum of an object, p=m(vfvi), are equivalent.
mgh = (90.0 kg)(9.81 m/s²)(0.589 m) = 520.6 J
Therefore, Kyle's velocity just as he catches the ball is:
√{1}{2}mv² = 520.6 J implies v = √{2(520.6 J)}{90.0 kg} approx 10.4 m/s
Now, we can use Kyle's velocity and the horizontal distance he traveled to find the time he was in the air. The time is given by:
Delta x = vt implies t = {Delta x}{v} = {0.0396 m}{10.4 m/s} approx 0.0038 s
h = {1}{2}gt² implies t = √{2h}{g} = √{2(0.589 m)}{9.81 m/s²} approx 0.341 s
During this time, the ball traveled a horizontal distance of:
Delta x = vt = (v_{x,ball})(t) implies v_{x,ball} = {Delta x}{t} = {0.0396 m}{0.341 s} approx 0.116 m/s
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ9
should it be limited to 60% charge too when playing? or is it different for gaming than light tasks?
No, it is not necessary to limit the charge of your device to 60% when gaming. When it comes to gaming, it is recommended to charge your device between 40-90%.
This is because if your device is fully charged, it may reduce the lifespan of your battery and make it more vulnerable to heat-related damage.
As for light tasks such as web browsing and email, it is best to keep your device's charge between 30-60% in order to maximize battery life.
When it comes to gaming, you should make sure your device is not exposed to extremely high temperatures or charged beyond the recommended range.
Overcharging can damage the battery and lead to overheating which can reduce the performance of your device.
It is important to check the power settings of your device to ensure that your device is not wasting too much power. You can do this by going to the Settings of your device and accessing the Battery menu.
From there you can check what apps are draining the most power and set up the device to reduce power usage.
It is important to maintain the charge of your device in the recommended range while playing games, between 40-90%.
Doing so will help ensure the longevity of your battery and reduce the risk of heat-related damage. Additionally, you should keep an eye on your power settings to ensure that your device is not wasting too much power.
to know more about charge refer here:
https://brainly.com/question/11944606#
#SPJ11
at a particular instant, a hot air balloon is 210 m in the air and descending at a constant speed of 3.5 m/s. at this exact instant, a girl throws a ball horizontally, relative to herself, with an initial speed of 21 m/s. when she lands, where will she find the ball? ignore air resistance. (find the distance, in meters, from the girl to the ball.)
The ball which is thrown with a speed of 21 m/s, travels a distance of 129.99 m in the horizontal direction.
Therefore, the vertical component of the ball's motion will be determined by the force of gravity and the initial vertical speed of the balloon.
We can use the following kinematic equation to determine how long it takes for the ball to fall to the ground:
h = ut + 1/2 * g * t^2
where h is the initial height of the ball (equal to the height of the balloon which is 210 m).
u is the initial velocity of the ball in the vertical direction which is 3.5 m/s.
g is the acceleration due to gravity (approximately 9.8 m/s^2),
and t is the time it takes for the ball to fall to the ground.
Plugging in the values we know, we get:
210 = 3.5 * t + 1/2 * 9.8 * t^2
4.9 t^2 + 3.5 t - 210 = 0
t = 6.19 seconds
Now we can use the time it takes for the ball to fall to the ground to determine how far it travels horizontally, given its initial horizontal velocity of 21 m/s. We can use the following equation:
d = v * t
where d is the horizontal distance traveled by the ball, v is its initial horizontal velocity, and t is the time it takes to fall to the ground (which we just calculated).
Plugging in the values we know, we get:
d = 21 * 6.19
d ≈ 129.99 meters
Therefore, the girl will find the ball approximately at a distance of 129.99 meters away from her when she lands after throwing the ball horizontally.
Learn more about the kinematic equation:
https://brainly.com/question/28712225
#SPJ11
Harrison shows up to every team practice and game ready to help the team improve. Which sportsmanship trait does Harrison show?
Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.
Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.
Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents. Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.
To learn more about Sportsmanship visit here:
brainly.com/question/9234010
#SPJ4
Answer: Harrison shows the sportsmanship trait of commitment by consistently showing up to every team practice and game, ready to help the team improve. His dedication and reliability contribute to a positive team culture and demonstrate his commitment to the team's success.
Sportsmanship is the conduct or behavior of a person while participating in a sporting activity. It involves showing respect towards opponents, officials, and spectators, as well as following the rules and playing fair. Sportsmanship is about more than just winning; it's about respecting the spirit of the game and valuing the efforts of all participants, whether they win or lose. It requires showing humility in victory and grace in defeat.
Good sportsmanship also involves encouraging and supporting teammates, regardless of their performance. It means refraining from unsportsmanlike behavior such as trash-talking, cheating, or intentionally injuring opponents. Sportsmanship is an attitude and a set of values that promotes fair play, respect, and integrity in sports. It is essential for creating a positive and enjoyable sports environment for everyone involved.
Explanation: NOT MINE!
CREDITS : contexto1028
A 750-kg roller coaster car drops from rest at a height of 90.0 m along a frictionless track. If the coefficient of kinetic friction due to braking along a horizontal track at the end of the ride is 0.720, over what distance does the car need to brake to come to a complete stop?
speed up a frictionless ramp ( 30.03) by a horizontal force . what are the magnitudes of (a) and (b) the force on the crate from the ramp?
The magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. According to this law, the net force on an object is equal to the mass of the object multiplied by its acceleration.
In this case, (a) is the force of friction, which is equal to the coefficient of friction multiplied by the normal force. The normal force is equal to the mass of the crate multiplied by the acceleration of gravity (g). Therefore, the magnitude of (a) is equal to the coefficient of friction multiplied by the mass of the crate multiplied by the acceleration of gravity.
(b) is the force of the horizontal force applied to the ramp, which is equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp. The magnitude of (b) is therefore equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.
To sum up, the magnitudes of (a) and (b) the force on the crate from the ramp can be calculated using Newton's second law of motion. (a) is the force of friction, equal to the coefficient of friction multiplied by the normal force. (b) is the force of the horizontal force applied to the ramp, equal to the magnitude of the horizontal force multiplied by the cosine of the angle of the ramp.
To know more about magnitudes refer here:
https://brainly.com/question/15681399#
#SPJ11
which of the following quantities represent mass? check all that apply. which of the following quantities represent mass?check all that apply. 12.0 lb l b 0.34 g g 120 kg k g 1600 kn k n 0.34 m m 411 cm c m
The quantities that represent mass are 12.0 lb, 0.34 g, 120 kg, and 411 cm.
Mass is the amount of matter that an object contains. It is a scalar physical quantity that can be determined by weighing an object. The standard unit of mass is kilogram (kg). Mass is constant regardless of the object's location in the universe.
The following are the quantities that represent mass:12.0 lb: It is a unit of mass used in the US and some other countries. It stands for pounds, which is equal to 0.45359237 kg.0.34 g: It is a unit of mass used in the metric system. It stands for grams, which is equal to 0.001 kg.120 kg: It is a unit of mass used in the metric system. It stands for kilograms, which is equal to 1000 g.411 cm: It is a unit of length used in the metric system. It stands for centimeters, which is equal to 0.01 m.
Learn more about metric system at:
https://brainly.com/question/634405
#SPJ11
bob is pushing a box across the floor at a constant speed of 1.4m/s m / s , applying a horizontal force whose magnitude is 55n n . alice is pushing an identical box across the floor at a constant speed of 2.8m/s m / s , applying a horizontal force. a) what is the magnitude of the force that alice is applying to the box?
The magnitude of the force that Alice is applying to the box is 110 N.
To calculate the force that Alice is applying, we need to use the equation F = ma. In this equation, F is the force applied, m is the mass of the box, and a is the acceleration of the box.
Since Alice is pushing the box at a constant speed of 2.8 m/s, the acceleration is 0, and the equation simplifies to F = 0 x m. Since the force must equal 0 when the acceleration is 0, the magnitude of the force that Alice is applying to the box is 0.
However, since Bob is pushing an identical box across the floor at a constant speed of 1.4 m/s, the acceleration is 0 and the equation simplifies to F = m x a. In this case, a is the acceleration of the box, which is 1.4 m/s.
Since we know that the magnitude of the force Bob is applying is 55 N, we can use the equation to calculate the force Alice is applying. 55 N = m x 1.4 m/s, which simplifies to m = 39.286.
We then substitute m back into the equation F = ma, so F = 39.286 x 1.4 m/s. This simplifies to F = 55.0 N, so the magnitude of the force Alice is applying is 55.0 N.
To know more about constant speed click on below link:
https://brainly.com/question/30151073#
#SPJ11