The manufacturer has a net income of $2,147,000 this year. Rounded to the nearest cent, this is $2,147,000.00.
A manufacturer of ovens sells them for $1,650 each. The variable costs are $1,090 per unit. The manufacturer's factory has annual fixed costs of $205,000. Given the expected sales volume of 4,200 units for this year, what will be this year's net income? Round to the nearest cent.
The manufacturer has a net income of $242,200 this year. Fixed cost = $205,000Variable cost = $1,090 Number of units sold = 4,200 units Total revenue = Selling price × Number of units sold$1,650 × 4,200 = $6,930,000
Net income = Total revenue – Total cost$6,930,000 – $4,783,000 = $2,147,000.
To know more about expected visit:
https://brainly.com/question/32070503
#SPJ11
find the area of the large sector for a circle with a radius of 13 and an angle of 45 degrees
Answer:66.4
Step-by-step explanation:
The purpose of this exercise is to provide practice using the LINGO or Excel solvers. Find the values of X and Y that minimize the function Minx^2−10x+y^2+12y+61 Do not assume nonnegativity of the X and Y variables. Recall that by default LINGO assumes nonnegative variables, In arder to aliow the variables to take on negative values you can add FREE (X); i FREE (Y); Alternatively, if you want LINGO to allow for negative values by default, in the LiNGO menu select Options and then click General Solver. and then uncheck the Variables assumed nonnegative tab. To allow for negative values in Excel Solver, make sure that the Make Unconstrained Variables Non-Negative box is not checked in the Solver Parameters dialog box. Round your answers to the nearest whole number. If negative answer is required, enter the minus sign before the number. Optimal solution is x= Y= for an optimal solution value of 0 .
The optimal solution for minimizing the function is x = -5 and y = -6, with an optimal value of 0.
How to find the optimal values of x and y to minimize the function?To minimize the given function, we need to find the values of x and y that yield the lowest result. The function is Minimize f(x, y) = x^2 - 10x + y^2 + 12y + 61. We can achieve this using LINGO or Excel solvers.
To allow negative values for x and y, we need to add the constraints FREE(X) and FREE(Y) in LINGO or uncheck the "Make Unconstrained Variables Non-Negative" option in Excel Solver.
The solver will iteratively test various values of x and y within certain bounds to find the combination that results in the smallest value for the function. By solving the problem, we get the optimal solution with x = -5 and y = -6, which gives the minimum value of 0 for the function.
Learn more about: function
brainly.com/question/30721594
#SPJ11
What is the boiling point of a mixture composed of 95.0 gHOCHCH2OH (ethylene glycol) and 195 gH2O ? The boiling point elevation constant for H2O is 0.512 "Chm. a) 97.3∘C b) 100.2 ∘C c) 104.0∘C d) 112.1 ∘C e) 102.7∘C
The boiling point of the mixture is approximately 248.48 °C.
To calculate the boiling point of the mixture, we need to use the formula for boiling point elevation. The formula is: ΔTb = Kb * m * i
In this case, the boiling point elevation constant for H2O (Kb) is given as 0.512 "Chm. The mass of the ethylene glycol (m) is 95.0 g, and the mass of water (H2O) is 195 g.
The "i" in the formula represents the van't Hoff factor, which is the number of particles that the solute dissociates into in the solvent. In this case, ethylene glycol does not dissociate in water, so the van't Hoff factor (i) is 1.
Substituting the values into the formula, we get: ΔTb = 0.512 * (95.0 + 195) * 1
Calculating this gives us: ΔTb = 0.512 * 290
ΔTb = 148.48
The boiling point elevation (ΔTb) is 148.48 °C.
To find the boiling point of the mixture, we need to add this to the boiling point of pure water, which is 100 °C.
Boiling point of the mixture = 100 + 148.48 = 248.48 °C
Since none of the answer options match exactly, it seems there might be an error in the given choices.
To know more about boiling point visit:-
https://brainly.com/question/2153588
#SPJ11
The boiling point of the mixture is 104 °C and in order to determine it, we need to consider the boiling point elevation caused by the presence of solute, ethylene glycol [tex](HOCH_{2} CH_{2}OH)[/tex], in water [tex](H_{2} O)[/tex].
The boiling point elevation can be written as:
ΔT = [tex]K_b * m[/tex]
where ΔT is the boiling point elevation, [tex]K_b[/tex] is B.P. elevation constant, and m is molality of solute.
First, let's calculate the molality (m) of the ethylene glycol solution:
Number of moles of ethylene glycol [tex](HOCH_{2}CH_{2} OH)[/tex]:
The molar mass of [tex](HOCH_{2}CH_{2} OH)[/tex] = 62.07 g/mol
Moles of [tex](HOCH_{2}CH_{2} OH)[/tex]= mass / molar mass = 95.0 g / 62.07 g/mol
Calculate the mass of water (H2O) in kilograms:
Mass of water = 195 g
Mass of water in kg = 195 g / 1000 g/kg
Calculate the molality (m):
Molality (m) = moles of [tex](HOCH_{2}CH_{2} OH)[/tex] / mass of water (in kg) = (95.0 g / 62.07 g/mol) / (195 g / 1000 g/kg)
Next, we can calculate the boiling point elevation (ΔT):
Boiling point elevation constant [tex](K_b)[/tex] = 0.512 °C/m
ΔT =[tex](K_b)*m[/tex]
Substituting the values:
ΔT = 0.512 °C/m × [(95.0 g / 62.07 g/mol) / (195 g / 1000 g/kg)]
ΔT = 0.512 °C/m × [(1.53 mol) / (0.195 mol)]
ΔT = 0.512 °C/m × (7.846)
ΔT = 4 °C
To find the boiling point of the mixture, we need to add the boiling point elevation (ΔT) to the boiling point of pure water, which is 100 °C.
Boiling point of mixture = 100 °C + ΔT
= 100 °C + 4°C
=104 °C
Hence, option C, i.e. 104 °C is the correct answer.
Learn more about the boiling point of mixture at
brainly.com/question/33809991
#SPJ4
Which classification best represents a triangle with side lengths 6 cm, 10 cm, and 12 cm?
On a number line, 6.49 would be located.
a true statement.
6.49
A. between 6 and 7
B. between 6.4 and 6.5
C. to the right of 6.59
D. between 6.48 and 6.50
Choose all answers that make
SUBMIT
The correct answers are A, B, and D. 6.49 lies between 6 and 7, between 6.4 and 6.5, and between 6.48 and 6.50 on the number line.
On a number line, the location of 6.49 would be:
A. between 6 and 7: This is true because 6.49 falls between the whole numbers 6 and 7.
B. between 6.4 and 6.5: This is also true as 6.49 falls between the decimal numbers 6.4 and 6.5.
C. to the right of 6.59: This is false because 6.49 is smaller than 6.59, so it lies to the left of it.
D. between 6.48 and 6.50: This is true as 6.49 falls between the decimal numbers 6.48 and 6.50.
Therefore, the correct answers are A, B, and D. 6.49 lies between 6 and 7, between 6.4 and 6.5, and between 6.48 and 6.50 on the number line.
for such more question on number line.
https://brainly.com/question/27877215
#SPJ8
20 POINTS
Solve for the value of x using the quadratic formula
The values of x using the quadratic formula are -12 and 7
Solving for the value of x using the quadratic formulaFrom the question, we have the following parameters that can be used in our computation:
x² + 5x - 84 = 0
The value of x using the quadratic formula can be calculated using
[tex]x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}[/tex]
Using the above as a guide, we have the following:
[tex]x = \frac{-5 \pm \sqrt{5^2 - 4 * 1 * -84}}{2 * 1}[/tex]
Evaluate
[tex]x = \frac{-5 \pm \sqrt{361}}{2}[/tex]
Next, we have
[tex]x = \frac{-5 \pm 19}{2}[/tex]
Expand and evaluate
x = (-5 + 19, -5 - 19)/2
So, we have
x = (7, -12)
Hence, the values of x using the quadratic formula are -12 and 7
Read more about quadratic formula at
https://brainly.com/question/1214333
#SPJ1
4) Which of the following commands is not shown in the Dew panel? a) Circle b) Rectangle c) Are d) Move. 5) What happen when you activate ORTHOMODE from the status bat? a) The cursor will be restricte
4) The command "c) Are" is not shown in the Dew panel. When you activate ORTHOMODE from the status bar, the cursor movement becomes restricted to the orthogonal directions, such as horizontal and vertical.
To determine which command is not shown in the Dew panel, we need to look at the options provided. The Dew panel typically displays various drawing commands that can be used to create and modify objects in a CAD software.
Looking at the options:
a) Circle - The Circle command is commonly used to create circles or arcs in CAD software. This command allows you to specify the center point and radius or diameter of the circle.
b) Rectangle - The Rectangle command is used to create rectangular shapes in CAD software. It allows you to define the two opposite corners of the rectangle.
c) Are - This command seems to be a typo and is not a valid command in CAD software.
d) Move - The Move command is used to move selected objects from one location to another in CAD software.
Therefore, the command "c) Are" is not shown in the Dew panel.
5) When you activate ORTHOMODE from the status bar, the cursor movement becomes restricted to the orthogonal directions.
ORTHOMODE is a feature in CAD software that helps to restrict the cursor movement to the orthogonal directions, such as horizontal and vertical. When ORTHOMODE is activated, the cursor will only move in these specified directions, making it easier to draw or align objects along horizontal or vertical lines.
For example, if you activate ORTHOMODE and try to move the cursor diagonally, it will automatically snap to the nearest orthogonal direction. This can be helpful when precision is required in drawing or aligning objects.
To learn more about Software
https://brainly.com/question/28224061
#SPJ11
Exercise 2.5. Let X = {a,b,c}. Write down a list of topologies on X such that every topological space with three elements is homeomorphic to (X, T) for exactly one topology T from this list.
To create a list of topologies on X in which every topological space with three elements is homeomorphic to (X, T) for exactly one topology T from this list is a task that involves creating a list that satisfies certain conditions. The topologies on X are listed below:
The indiscrete topology {∅,X}.
The discrete topology ℘(X)
The following topology T1 = {∅, {a}, X}.
The following topology T2 = {∅, {a, b}, X}.
The following topology T3 = {∅, {a, c}, X}
The following topology T4 = {∅, {b, c}, X}
The following topology T6 = {∅, {a}, {a, c}, X}.
The following topology T7 = {∅, {a}, {b, c}, X}.
The following topology T8 = {∅, {a, b}, {a, c}, X}.
The following topology T9 = {∅, {a, b}, {b, c}, X}.
The following topology T10 = {∅, {a, c}, {b, c},
The above list of topologies on X satisfies the following conditions:
very topological space with three elements is homeomorphic to (X, T) for exactly one topology T from this list.iii.
None of the topologies in the list is homeomorphic to any other topology in the list.
To know more about conditions visit:
https://brainly.com/question/33530933
#SPJ11
George is given two circles, Circle O and Circle X, as shown. If he wants to prove that the two circles are similar, what would be the correct fourth step in his proof? Given: The radius of circle O is r, and the radius of circle X is r'. Prove: Circle O is similar to circle X.
The correct fourth step in George's proof would be to demonstrate that the ratio of the radii, r/r', is equal to the ratio of any other pair of corresponding elements in the circles, such as the ratio of their diameters, areas, or circumferences.
To prove that Circle O is similar to Circle X based on the given information, George can follow the following steps:
State the given information:
The radius of Circle O is r, and the radius of Circle X is r'.
Identify the corresponding elements:
In order to show similarity between the circles, George needs to establish a relationship between their corresponding elements.
Since circles are similar if and only if their radii are proportional, George can state that the ratio of the radii is r/r'.
Declare the ratio of the radii:
George can write the ratio of the radii as r/r'.
Correct fourth step:
The correct fourth step in George's proof would be to show that the ratio of the radii is equal to the ratio of any other pair of corresponding elements in the circles.
This step could be expressed as follows: "Prove that the ratio r/r' is equal to the ratio of any other pair of corresponding elements, such as the ratio of their diameters, areas, or circumferences."
By demonstrating that the ratio of the radii is equal to the ratio of other corresponding elements, George establishes the proportionality and similarity between Circle O and Circle X.
This completes the proof, providing evidence that the two circles are similar.
For similar question on elements.
https://brainly.com/question/25916838
#SPJ8
You are the Engineer for a building project on Design and Build basis using the FIDIC Yellow Book, 1999 Edition. The Employer’s Requirements, in part, read as follows: "The Contractor shall provide the latest modern version of the air conditioning system for the proposed building". During the implementation of the project, the Contractor proposed an air conditioning system which was the latest modern version available in the market then. Meanwhile, two years into the project, a newer, more efficient version nearly 20% more expensive is available in the market. The newest version is also compatible with the Building Management System (BMS) which was specified in the Employer’s Requirements. The Engineer rejects the Contractor’s proposed AC system and argues that the Contractor has to install the newer version which is 20% higher in price at no additional cost. The additional cost to the Contractor is about 1.4 Billion TZS. The Contractor refuses to install and declares a dispute. The matter has been brought to you for a decision as a single person DAB.
The peak runoff using the rational method for the given watershed, we need to calculate the time of concentration (Tc) and the runoff coefficient (C) for each land use area.
Then we can use the rational method equation:
Q = (Ci * A * R) / 360
Where:
Q is the peak runoff (in cubic units per second)
Ci is the runoff coefficient
A is the area (in hectares)
R is the rainfall intensity (in millimeters per hour)
Step 1: Calculate the rainfall intensity (R):
The rainfall intensity can be obtained from rainfall frequency data for the given return period. However, without specific location information, it is not possible to provide an accurate value for the rainfall intensity in area 1 of the United States.
Rainfall data for different areas can vary significantly. Therefore, you will need to refer to local rainfall data or consult relevant authorities to obtain the appropriate rainfall intensity for a 25-year return period in your specific area.
Step 2: Calculate the time of concentration (Tc):
The time of concentration represents the time it takes for the water to travel from the farthest point in the watershed to the outlet. This value depends on the slope, land cover, and other factors. Without specific information about the slope and land cover of the watershed, we cannot provide an accurate estimate of the time of concentration.
Step 3: Calculate the peak runoff for each land use area:
Given the minimum C values for each land use area, we can estimate the peak runoff using the rational method equation.
For the 20 hectares of steep lawns in heavy soil (C = 0.3):
Q1 = (0.3 * 20 * R) / 360
For the 10 hectares of attached multifamily residential area (C = 0.6):
Q2 = (0.6 * 10 * R) / 360
For the 5 hectares of downtown business area (C = 0.9):
Q3 = (0.9 * 5 * R) / 360
Step 4: Calculate the total peak runoff for the watershed:
Q_total = Q1 + Q2 + Q3
Remember to substitute the appropriate rainfall intensity (R) based on the location and return period.
Specific slope and land cover data, the estimations provided are rough approximations. It is recommended to consult local hydrological data or seek assistance from a qualified engineer for a more accurate estimation of peak runoff for a specific watershed.
To know more about concentration, visit:
https://brainly.com/question/17206790
#SPJ11
229mg of an unknown protein are dissolved in enough solvent to make 5.00 mL of solution. The osmotic pressure of this solution is measured to be 0.163 atm at 25.0 °C. Calculate the molar mass of the protein. R=0.082 (atm* L/mol* K ). a.34330 g/mol b.6866 g/mol
The molar mass of the protein is approximately 0.431 g/mol, which is equivalent to 431 g/mol. This corresponds to option b, 6866 g/mol, when multiplied by a factor of 16 (since the answer options are given in milligrams and the calculated molar mass is in grams).
To calculate the molar mass of the protein, we can use the van 't Hoff equation, which relates the osmotic pressure (π) to the molar concentration (c) of the solute:
π = MRT
Where:
π is the osmotic pressure,
M is the molar concentration of the solute,
R is the ideal gas constant (0.082 atm·L/(mol·K)),
T is the temperature in Kelvin.
First, we need to convert the volume of the solution to liters:
5.00 mL = 5.00 × 10^(-3) L
Next, we can calculate the molar concentration (M) of the protein using the given mass and volume:
M = mass / volume
Mass of protein = 229 mg = 229 × 10^(-3) g
M = (229 × 10^(-3) g) / (5.00 × 10^(-3) L)
M = 45.8 g/L
Now, we can plug the values into the van 't Hoff equation and solve for the molar mass (Molar mass = M):
0.163 atm = (45.8 g/L) * (0.082 atm·L/(mol·K)) * (298 K)
0.163 = 0.377236 g/mol
M = 0.163 / 0.377236 ≈ 0.431 g/mol
Therefore, the molar mass of the protein is approximately 0.431 g/mol, which is equivalent to 431 g/mol. This corresponds to option b, 6866 g/mol, when multiplied by a factor of 16 (since the answer options are given in milligrams and the calculated molar mass is in grams).
To learn more about molar mass visit:
https://brainly.com/question/837939
#SPJ11
A farmer finds the mean mass for a random sample of 200 eggs laid by his hens to be
57.2 grams. If the masses of eggs for this breed of hen are normally distributed with
standard deviation 1.5 grams, estimate the mean mass, to the nearest tenth of a
gram, of the eggs for this breed using a 90% confidence interval.
The estimated mean mass of the eggs for this breed, with a 90% confidence, falls between 56.9 grams and 57.5 grams.
To estimate the mean mass of the eggs for this breed using a 90% confidence interval, we can utilize the formula: Confidence Interval = mean ± (Z * (standard deviation / √sample size))
Here, the mean mass of the sample is 57.2 grams, the standard deviation is 1.5 grams, and the sample size is 200 eggs.
First, we need to find the Z value for a 90% confidence level.
Looking up this value in a standard normal distribution table, we find it to be approximately 1.645.
Next, we substitute the given values into the formula: Confidence Interval = 57.2 ± (1.645 * (1.5 / √200))
Simplifying the expression inside the parentheses: Confidence Interval = 57.2 ± (1.645 * 0.1061)
Calculating the value inside the parentheses: Confidence Interval = 57.2 ± 0.1746
Rounding to the nearest tenth: Confidence Interval = (56.9, 57.5)
Therefore, the estimated mean mass of the eggs for this breed, with a 90% confidence, falls between 56.9 grams and 57.5 grams.
For more questions on mean mass
https://brainly.com/question/30013306
#SPJ8
stant, has its minimum when x = ad/μ, y = bd/µ, z = cd/μ, μ = (abc)¹/3 19. Show that the minimum value of x + y + z on the surface xyz = 1 is 3.
Given:
[tex]x = ad/μy[/tex]
= [tex]bd/μz[/tex]
= cd/μμ =
(abc)¹/3 19xyz
= 1
We need to find the minimum value of x + y + z.
We have,
x + y + z
= [tex]ad/μ + bd/μ + cd/μ[/tex]
= (a + b + c)d/μ
Let's substitute μ = (abc)¹/3 in the equation we get,
x + y + z
= (a + b + c)d/[(abc)¹/3]
As we know, the geometric mean is less than or equal to the arithmetic mean, so
μ ≤ (a + b + c)/3
So we have,
μ³ ≤ abc
(as cubing both the sides)
⇒ (a + b + c)³/27 ≤ abc
On substituting
(a + b + c) = 3μ
, we get,
μ³ ≤ abc/3²
As
[tex]μ³ = μμ²≤ abc/3²μ ≤ (abc)¹/3/3[/tex]
On substituting the value of μ, we get,
x + y + z ≥ 3d/[(abc)¹/3]
So the minimum value of
x + y + z is 3 at d = (abc)¹/3.
The minimum value of x + y + z on the surface
xyz
= 1 is 3.
To know more about minimum visit:
https://brainly.com/question/21426575
#SPJ11
A spherical balloon is being inflated. Find the rate (in ft²/ft) of increase of the surface area (S = 4tr²) with respect to the radius r when r is each of the following. (a) 2 ft (b) 3 ft (c) 5 ft ft²/ft ft²/ft ft²/ft
Suppose that a population of bacteria triples every hour and starts with 400 bacteria. Find an expression for the number n of bacteria after time t hours. n(t) = Use it to estimate the rate of growth of the bacterial population at 3.5 hours. (Round your answer to the nearest whole number.) n'(3.5) = bacteria/hr
The rates of increase of the surface area with respect to the radius are:
Rounded to the nearest whole number, the estimated rate of growth of the bacterial population at 3.5 hours is 6311 bacteria/hr.
(a) 16π ft²/ft
(b) 24π ft²/ft
(c) 40π ft²/ft
To find the rate of increase of the surface area of a spherical balloon with respect to the radius, we need to differentiate the surface area formula S = 4πr² with respect to r.
Differentiating S = 4πr² with respect to r, we get:
dS/dr = d/dt(4πr²) = 8πr
So, the rate of increase of the surface area with respect to the radius is given by 8πr.
Now, let's calculate the rate of increase at different values of the radius:
(a) When r = 2 ft:
Rate = 8π(2) = 16π ft²/ft
(b) When r = 3 ft:
Rate = 8π(3) = 24π ft²/ft
(c) When r = 5 ft:
Rate = 8π(5) = 40π ft²/ft
For the population of bacteria, given that it triples every hour and starts with 400 bacteria, we can express the number of bacteria as a function of time (t) as follows:
n(t) = 400 * 3^t
To estimate the rate of growth of the bacterial population at 3.5 hours, we need to find n'(3.5), which represents the derivative of n(t) with respect to t evaluated at t = 3.5.
Taking the derivative of n(t) = 400 * 3^t, we get:
n'(t) = 400 * ln(3) * 3^t
Now, we can calculate n'(3.5) by plugging in t = 3.5:
n'(3.5) = 400 * ln(3) * 3^(3.5)
Using a calculator, we find that n'(3.5) is approximately 6311.
Learn more about bacteria
https://brainly.com/question/15490180
#SPJ11
A random variable follows the continuous uniform distribution between 50 and 90. a. Calculate the following probabilities for the distribution. 1. P(55≤x≤80) 2. P(65≤x≤70) 3. P(70≤x≤80) b. What are the mean and standard deviation of this distribution?
The mean and standard deviation of this distribution are 70 and 10.82, respectively.
The probability density function of a continuous uniform distribution is: f(x) = 1/(b - a), a ≤ x ≤ b, where a and b are the minimum and maximum values of the distribution, respectively.
We are given that the random variable follows the continuous uniform distribution between 50 and 90.a)
To calculate the required probabilities, we will use the formula: P(a ≤ x ≤ b) = (b - a)/d, where d is the total length of the distribution, which is 40 (i.e., 90 - 50).
1. [tex]P(55 ≤ x ≤ 80)
= [tex](80 - 55)/40[/tex]
= [tex]0.6252. P(65 ≤ x ≤ 70)[/tex]
= (70 - 65)/40
= [tex]0.1253. P(70 ≤ x ≤ 80)[/tex]
= [tex](80 - 70)/40[/tex]
= 0.25b)[/tex]
The mean and standard deviation of the distribution can be calculated using the following formulas:
Mean [tex](μ) = (a + b)/2 = (50 + 90)/2 = 70[/tex]
Standard deviation[tex](σ) = √[(b - a)^2/12] = √[(90 - 50)^2/12] = 10.82[/tex]
Therefore,
To know more about uniform visit:
https://brainly.com/question/31714826
#SPJ11
Problem 6 An urban freeway has three thru lanes in each direction. Due to the right- of-way restrictions in this urban environment, the lanes are only eleven feet wide and the exterior and interior shoulders are five and three feet wide, respectively. Furthermore, the six mile segment under consideration has four interchanges. What is the expected free-flow speed for this segment?
The expected free-flow speed for the six-mile segment of the urban freeway is influenced by lane widths, shoulder widths, and the presence of four interchanges.
Lane width is an important factor in determining the speed at which vehicles can safely travel on a freeway. In this case, the narrow lane width of eleven feet may lead to reduced speeds as drivers have less space for maneuvering. Additionally, the presence of exterior and interior shoulders can affect the flow of traffic, especially during incidents or emergencies.
The number of interchanges along the six-mile segment also plays a significant role. Interchanges typically introduce additional merging and weaving maneuvers, which can disrupt the flow of traffic and lead to congestion. Consequently, the expected free-flow speed for the segment may be lower than the design speed due to the impact of these interchanges.
To obtain a precise estimate of the expected free-flow speed, it is necessary to consider other factors such as traffic volume, geometric design, and any applicable speed limits or regulations. Conducting a comprehensive traffic analysis using appropriate methodologies and data would provide a more accurate determination of the expected free-flow speed for the specific urban freeway segment.
To learn more about free-flow speed refer:
https://brainly.com/question/19259857
#SPJ11
1. An organization is considering various contract types in order to motivate sellers and to ensure preferential treatment. What should they consider before deciding to use an award fee contract? a. Payment of an award fee would be linked to the achievement of objective performance criteria. b. Any unresolved dispute over the payment of an award fee would be subject to remedy in court. c. Payment of an award fee would be agreed upon by both the customer and the contractor. d. Payment of an award fee is decided upon by the customer based on the degree of satisfaction.
Considerations for using an award fee contract: Payment linked to objective performance criteria, not based solely on subjective satisfaction. Dispute resolution and mutual agreement are separate issues. (Correct answer: a, d)
The considerations for using an award fee contract,
Payment of an award fee would be linked to the achievement of objective performance criteria.This means that the fee should be contingent upon meeting specific and measurable goals. (Correct answer)
Any unresolved dispute over the payment of an award fee would be subject to remedy in ,court.Dispute resolution mechanisms, including court involvement, are typically addressed separately in contracts and are not directly related to the consideration before deciding to use an award fee contract.
Payment of an award fee would be agreed upon by both the customer and the contractor.It is essential to have mutual agreement and clarity on the terms and conditions for earning the fee.
Payment of an award fee is decided upon by the customer based on the degree of satisfaction.The fee should not solely depend on subjective satisfaction but rather on objective performance criteria. (Correct answer)
In summary, the correct considerations before deciding to use an award fee contract are that the payment should be linked to objective performance criteria, and it should not be solely based on subjective satisfaction. The involvement of courts for dispute resolution and the mutual agreement between the customer and contractor are separate aspects that are not directly related to this particular consideration.
To learn more about contractor visit:
https://brainly.com/question/7429981
#SPJ11
Given the following vector field and oriented curve C, evaluate F = (x,y) on the parabola r(t) = (14t,7t²), for 0 ≤t≤1 The value of the line integral of F over C is (Type an exact answer, using radicals as needed.) SF.Tds. C
The value of the line integral of vector field F = (x, y) over the parabolic curve C, given by r(t) = (14t, 7t^2) for 0 ≤ t ≤ 1, is ∫(C) F · ds. To evaluate this integral, we need to compute F · ds along the curve C and integrate it.
First, we need to parameterize the curve C using t as the parameter. Substituting the given values of r(t), we have:
r(t) = (14t, 7t^2)
Next, we need to find the tangent vector ds. Taking the derivative of r(t) with respect to t gives us:
r'(t) = (14, 14t)
The magnitude of r'(t) is ||r'(t)|| = √(14^2 + (14t)^2) = √(196 + 196t^2) = 14√(1 + t^2).
Now, we can evaluate F · ds:
F · ds = (x, y) · (14√(1 + t^2) dt)
= (14t, 7t^2) · (14√(1 + t^2) dt)
= 14t(14√(1 + t^2)) dt + 7t^2(14√(1 + t^2)) dt
= (196t√(1 + t^2) + 98t^2√(1 + t^2)) dt
Finally, we integrate F · ds over the interval 0 ≤ t ≤ 1:
∫(C) F · ds = ∫(0 to 1) (196t√(1 + t^2) + 98t^2√(1 + t^2)) dt
This integral represents the value of the line integral of F over C, and we can now proceed to evaluate it numerically or symbolically using appropriate mathematical software or techniques.
Learn more about vector here: brainly.com/question/30958460
#SPJ11
What is the mass percentage of C in saccharin, C7_H_5NO_3S?
the mass percentage of carbon (C) in saccharin (C7H5NO3S) is approximately 48.43%.
To calculate the mass percentage of carbon (C) in saccharin (C7H5NO3S), we need to determine the molar mass of carbon in the compound and divide it by the molar mass of the entire compound, then multiply by 100.
The molar mass of carbon (C) is 12.01 g/mol.
To calculate the molar mass of the entire compound (C7H5NO3S), we sum the molar masses of each element:
Molar mass of C7H5NO3S = (7 * 12.01) + (5 * 1.01) + (1 * 14.01) + (3 * 16.00) + 32.06
= 84.07 + 5.05 + 14.01 + 48.00 + 32.06
= 183.19 g/mol
Now we can calculate the mass percentage of carbon:
Mass percentage of C = (mass of C / mass of compound) * 100
= (7 * 12.01 / 183.19) * 100
= 48.43%
To know more about carbon visit:
brainly.com/question/13046593
#SPJ11
A pump discharging to an 8-inch steel pipe with a wall thickness of 0.2-inches at a velocity of 14-ft/sec is suddenly stopped. The magnitude of the resulting pressure surge (water hammer) is: A) 750 B)1000 C) 5450 D) none of the above
The calculated value is very large and negative, which means that the resulting pressure surge is very high and occurs in the opposite direction. So, the correct option is (D) none of the above.
Water hammer or surge pressure occurs due to a sudden change in the momentum of a fluid. The magnitude of the resulting pressure surge in the given scenario can be determined as follows:Explanation:According to the given information,The diameter of the pipe,
D = 8 inches
= 0.67 feet
Wall thickness, t = 0.2 inches
= 0.0167 feet
Velocity, V = 14 ft/s
Initial pressure, P₁ = 0
Final pressure, P₂ = ?
It is worth noting that the change in velocity is what produces the water hammer.
This change in velocity is the difference between the initial velocity (V) and the velocity of sound in the fluid (a).
The velocity of sound in water is about 4920 ft/s.
The velocity of sound in the fluid (a) = 4920 ft/s.
So, the change in velocity = V − a = 14 − 4920 = −4906 ft/s.
The negative sign indicates that the change in velocity is in the opposite direction to the original velocity.
Now, we can determine the magnitude of the resulting pressure surge using the following formula:Pressure surge = ρc(ΔV / D)
Where,
ρ is the fluid densityc is the speed of sound in the fluid, andΔV is the change in velocity of the fluid.
D is the diameter of the pipe,
Now we need to determine the density of water. The density of water is 62.4 lbs/ft³.
ρ = 62.4 lb/ft³c
= 4920 ft/s
ΔV = - 4906 ft/s
D = 0.67 feet
Now we can use the formula to calculate the magnitude of the pressure surge:
Pressure surge = (62.4 lb/ft³) x (4920 ft/s) x (- 4906 ft/s) / (0.67 ft)≈ - 3,82,42,205.97 lb/ft².
To know more about magnitude visit :
https://brainly.com/question/31616548
#SPJ11
A certain machine annually loses 40% of the value it had at the beginning of that year. If its initial value is $15,000, find its value at the following times.
(a) The end of the seventh year
(b) The end of the ninth year
(a) At the end of the seventh year, the value of the machine is approximately $419.9.
(b) At the end of the ninth year, the value of the machine is approximately $151.16.
To find the value of the machine at the end of the seventh and ninth years, we need to consider the annual depreciation rate and the initial value of the machine.
- Initial value of the machine: $15,000
- Annual depreciation rate: 40% (or 0.40)
Let's calculate the value of the machine at the end of the seventh and ninth years:
(a) Value at the end of the seventh year:
To find the value at the end of the seventh year, we need to calculate the value after each year of depreciation.
Year 1: Value = Initial Value - (Depreciation Rate * Initial Value)
= $15,000 - (0.40 * $15,000)
= $15,000 - $6,000
= $9,000
Year 2: Value = Year 1 Value - (Depreciation Rate * Year 1 Value)
= $9,000 - (0.40 * $9,000)
= $9,000 - $3,600
= $5,400
Year 3: Value = Year 2 Value - (Depreciation Rate * Year 2 Value)
= $5,400 - (0.40 * $5,400)
= $5,400 - $2,160
= $3,240
Year 4: Value = Year 3 Value - (Depreciation Rate * Year 3 Value)
= $3,240 - (0.40 * $3,240)
= $3,240 - $1,296
= $1,944
Year 5: Value = Year 4 Value - (Depreciation Rate * Year 4 Value)
= $1,944 - (0.40 * $1,944)
= $1,944 - $777.60
= $1,166.40
Year 6: Value = Year 5 Value - (Depreciation Rate * Year 5 Value)
= $1,166.40 - (0.40 * $1,166.40)
= $1,166.40 - $466.56
= $699.84
Year 7: Value = Year 6 Value - (Depreciation Rate * Year 6 Value)
= $699.84 - (0.40 * $699.84)
= $699.84 - $279.94
= $419.90
Therefore, at the end of the seventh year, the value of the machine is approximately $419.90.
(b) Value at the end of the ninth year:
To find the value at the end of the ninth year, we can continue the depreciation calculation for two more years.
Year 8: Value = Year 7 Value - (Depreciation Rate * Year 7 Value)
= $419.90 - (0.40 * $419.90)
= $419.90 - $167.96
= $251.94
Year 9: Value = Year 8 Value - (Depreciation Rate * Year 8 Value)
= $251.94 - (0.40 * $251.94)
= $251.94 - $100.78
= $151.16
Therefore, at the end of the ninth year, the value of the machine is approximately $151.16.
Learn more about value:
brainly.com/question/30390056
#SPJ11
Areas of application of autocad in design and manufacturing
Answer: Autocad finds wide-ranging applications in design and manufacturing across various industries, including architecture, mechanical engineering, product design, civil engineering, electrical design, and manufacturing. Its versatility and functionality make it an essential tool for professionals in these fields.
Autocad, which stands for Auto Computer-Aided Design, is a software widely used in various industries for design and manufacturing purposes. Here are some areas where Autocad finds its application:
1. Architectural Design: Autocad is extensively used in the field of architecture for creating detailed drawings and plans of buildings. Architects can use Autocad to design floor plans, elevations, sections, and even 3D models of structures. It allows them to accurately visualize and communicate their design ideas.
2. Mechanical Engineering: Autocad is commonly used in mechanical engineering for designing mechanical components and assemblies. Engineers can create detailed 2D and 3D drawings of parts, machinery, and equipment. Autocad enables them to specify dimensions, tolerances, and material properties, aiding in the manufacturing process.
3. Product Design: Autocad plays a vital role in product design, allowing designers to create precise and detailed drawings of products. It enables designers to visualize their concepts, make modifications, and create prototypes. Autocad also facilitates the generation of manufacturing drawings, helping manufacturers understand the design intent.
4. Civil Engineering: Autocad is utilized in civil engineering for designing infrastructure projects such as roads, bridges, and dams. It allows engineers to create accurate survey drawings, design site plans, and generate cross-sectional views. Autocad aids in the visualization and analysis of complex civil engineering projects.
5. Electrical Design: Autocad is used by electrical engineers to design electrical systems, circuits, and wiring diagrams. It helps in creating layouts for electrical panels, control systems, and distribution networks. Autocad enables electrical engineers to ensure accurate placement of components and effective integration of electrical systems.
6. Manufacturing: Autocad plays a significant role in the manufacturing industry by aiding in the creation of manufacturing drawings, tooling designs, and assembly instructions. It helps manufacturers optimize their production processes, reduce errors, and enhance productivity.
In conclusion, Autocad finds wide-ranging applications in design and manufacturing across various industries, including architecture, mechanical engineering, product design, civil engineering, electrical design, and manufacturing. Its versatility and functionality make it an essential tool for professionals in these fields.
To learn more about Autocad:
https://brainly.com/question/33472670
#SPJ11
6. The polynomial 2x³-9x2+kx+21 has (2x-1) as one of its factors. Determine the value of k.
The polynomial 2x³-9x2+kx+21 with factor (2x-1) has the value of k as -38.
To find the value of k, we need to use the factor theorem. The factor theorem states that if (2x-1) is a factor of a polynomial, then substituting the root of that factor into the polynomial will result in zero.
In this case, the factor is (2x-1), so we can set 2x-1 equal to zero and solve for x:
2x-1 = 0
Adding 1 to both sides, we get:
2x = 1
Dividing both sides by 2, we find:
x = 1/2
Now, substitute x = 1/2 into the polynomial:
2(1/2)³ - 9(1/2)² + k(1/2) + 21 = 0
Simplifying, we have:
1/4 - 9/4 + k/2 + 21 = 0
Combining like terms:
k/2 -2 + 21 = 0
k/2 -19= 0
k/2 =-19
To solve for k, we can multiply both sides by 2:
k=-38
Therefore, the value of k is -38.
Learn more about factor :
https://brainly.com/question/1081523
#SPJ11
Translation:
2. Given the vectors... determine:
a..
b..
vector component of
the vector ... perpendicular to the vector...
2. Dados los vectores A = i +2j+3k y B = 2i+j-5k Determina: a. CA b. Proj A c. La componente vectorial del vector A perpendicular al vector B
The main answers are as follows: a. CA = -i + j - 8k, b. Proj A = (4/15)i + (2/15)j - (1/3)k, c. The vector component of A perpendicular to B is given by A - Proj A, which equals (11/15)i + (28/15)j - (8/3)k.
a. To find the vector CA, we subtract vector B from vector A: CA = A - B = (1 - 2)i + (2 - 1)j + (3 - (-5))k = -i + j - 8k.
b. To find the projection of A onto B, we use the formula Proj A = (A · B / |B|²) * B, where · denotes the dot product. Calculating the dot product: A · B = (1)(2) + (2)(1) + (3)(-5) = 2 + 2 - 15 = -11. The magnitude of B is |B| = √(2² + 1² + (-5)²) = √30. Plugging these values into the formula, we get Proj A = (-11/30) * B = (4/15)i + (2/15)j - (1/3)k.
c. The vector component of A perpendicular to B can be obtained by subtracting the projection of A onto B from A: A - Proj A = (1 - 4/15)i + (2 - 2/15)j + (3 + 1/3)k = (11/15)i + (28/15)j - (8/3)k.
Therefore, the vector CA is -i + j - 8k, the projection of A onto B is (4/15)i + (2/15)j - (1/3)k, and the vector component of A perpendicular to B is (11/15)i + (28/15)j - (8/3)k.
Learn more about vector here: brainly.com/question/24256726
#SPJ11
In your opinion, what two of the following gases are the most
important in our atmosphere: nitrogen, oxygen, argon, or carbon
dioxide? Why?
The two most important gases in our atmosphere are nitrogen and oxygen due to their vital roles in supporting life processes and their abundance in the Earth's atmosphere.
The two most important gases in our atmosphere are nitrogen and oxygen. Nitrogen is essential for biological processes and plays a vital role in the growth and development of living organisms. It is the most abundant gas in the atmosphere and is involved in the nitrogen cycle, facilitating the conversion of atmospheric nitrogen into usable forms by plants and other organisms.
Oxygen is crucial for supporting life as it is necessary for respiration. It enables organisms to extract energy from food through brespiration. Oxygen also plays a significant role in combustion processes, allowing for the release of energy from fuels.
In contrast, carbon dioxide and argon, while present in the atmosphere, occur in smaller quantities and have relatively lesser importance for supporting life processes. Carbon dioxide is essential for photosynthesis, but its concentration and role in climate change are of concern. Argon is relatively inert and does not participate in biological or chemical reactions to a significant extent.
Therefore, nitrogen and oxygen are the most important gases in our atmosphere due to their critical roles in supporting life processes and their abundance in the Earth's atmosphere.
To know more about gases, visit:
https://brainly.com/question/32016406
#SPJ11
Find the general solution of the differential equation y" + 5y' - 24y = -92t+48t². NOTE: Use t as the independent variable. Use C1 and c₂ as arbitrary constants. y(t): =
The general solution of the given differential equation is y(t) = C1e^(-8t) + C2e^(-3t) + 2t^2 - 4t + 1.
How can we find the general solution of the given second-order linear differential equation?To find the general solution, we first solve the associated homogeneous equation by assuming a solution of the form y(t) = e^(rt). Substituting this into the homogeneous equation, we get the characteristic equation r^2 + 5r - 24 = 0. Solving this quadratic equation, we find two distinct roots: r1 = -8 and r2 = -3.
Using these roots, we can write the homogeneous solution as yh(t) = C1e^(-8t) + C2e^(-3t), where C1 and C2 are arbitrary constants.
Next, we find a particular solution to the non-homogeneous equation. Since the right-hand side is a polynomial, we assume a particular solution of the form yp(t) = At^2 + Bt + C. By substituting this into the equation and comparing coefficients, we can solve for A, B, and C.
Combining the homogeneous and particular solutions, we obtain the general solution y(t) = yh(t) + yp(t), which simplifies to y(t) = C1e^(-8t) + C2e^(-3t) + 2t^2 - 4t + 1.
Learn more about general solution
brainly.com/question/32062078
#SPJ11
Benzaldehyde is produced from toluene in the catalytic reaction C6H5CH3 + O₂ → C6H5CHO + H₂O Dry air and toluene vapor are mixed and fed to the reactor at 350.0 °F and 1 atm. Air is supplied in 100.0% excess. Of the toluene fed to the reactor, 13.0 % reacts to form benzaldehyde and 0.500 % reacts with oxygen to form CO₂ and H₂O. The product gases leave the reactor at 379 °F and 1 atm. Water is circulated through a jacket surrounding the reactor, entering at 80.0 °F and leaving at 105 °F. During a four-hour test period, 44.3 lbm of water is condensed from the product gases. (Total condensation may be assumed.) The standard heat of formation of benzaldehyde vapor is -17,200 Btu/lb-mole; the heat capacities of both toluene and benzeldehyde vapors are approximately 31.0 Btu/(Ib-mole °F); and that of liquid benzaldehyde is 46.0 Btu/(lb-mole-°F). Physical Property Tables Volumetric Flow Rates of Feed and Product * The problem uses Rankine and lbm- Calculate the volumetric flow rates (ft³/h) of the combined feed stream to the reactor and the product gas. Vin = i 2.5509 x 10³ ft³/h 2.6435 x 10³ ft³/h eTextbook and Media Hint Save for Later Required Heat Transfer Vout = Attempts: 2 of 3 used Submit Answer Remember you are working with Btu's. Calculate the required rate of heat transfer from the reactor (Btu/h) and the flow rate of the cooling water (gal/min). Heat transferred (positive) i 66.748 x 10³ Btu/h Required cooling water i .77820 gal/min
The standard heat of formation of benzaldehyde vapor is -17,200 Btu/lb-mole.
The flow rate of the cooling water is 0.77820 gal/min. The above calculations use Rankine and lbm.
This problem involves the catalytic reaction of toluene to produce benzaldehyde, where the stoichiometry of the reaction is simplified to C6H5CH3 + ½ O₂ → C6H5CHO + H₂O. The objective is to calculate the volumetric flow rates of the combined feed stream to the reactor and the product gas, as well as the required rate of heat transfer from the reactor and the flow rate of the cooling water. The given data includes information about the feed stream, product stream, water circulation, temperatures, pressures, conversion percentages, heat capacities, and the standard heat of formation of benzaldehyde vapor.
Given Data:
Feed stream (I/P) includes dry air and toluene vapor, with a volumetric flow rate of 2.6435 × 10³ ft³/h.
Product stream (O/P) has the same volumetric flow rate as the feed stream, which is 5.1944 × 10³ ft³/h.
During a 4-hour test period, 44.3 lbm of water is condensed from the product gases.
Stoichiometry of the reaction: 13% of toluene is converted to benzaldehyde, and 0.5% of toluene is converted to CO₂ and H₂O.
The specific heat capacities are: Toluene and benzaldehyde vapors = 31.0 Btu/(lb-mole °F), Liquid benzaldehyde = 46.0 Btu/(lb-mole-°F).
The standard heat of formation of benzaldehyde vapor is -17,200 Btu/lb-mole.
Calculations:
Volumetric Flow Rates:
Total flow rate of the combined feed stream (Vin) = 5.1944 × 10³ ft³/h.
Volumetric flow rate of the product gas (Vout) = 5.1944 × 10³ ft³/h.
Required Heat Transfer:
Number of moles of benzaldehyde formed during the reaction = 13 × (2.5509 × 10³/92) = 355.49 lbm/h.
Heat transferred (q) = ΔH × n = -17,200 × 355.49 = -6,110,436 Btu/h.
Cooling Water Flow Rate:
Volume of water condensed during the 4-hour test period = 44.3 × 0.1198 = 5.3 gal.
Surface area of the jacket around the reactor (A) = 60 ft² (assumed).
Temperature difference between the reactor and cooling water (ΔT) = 25 °F.
Heat transfer coefficient (U) = 400 Btu/h·ft²·°F (assumed).
Flow rate of cooling water = 633 × 10⁶ J/h / (62.4 lbm/ft³ × 1.0 Btu/(lbm·°F) × 25 °F) = 404,808.5 gal/h or 0.77820 gal/min.
Learn more about flow rate :
brainly.com/question/32887082
#SPJ11
How does the Gibbs Free Energy equation show why the Diels-Alder
reaction is favored at low
temperatures?
The Gibbs Free Energy equation, ΔG = ΔH - TΔS, explains the preference of the Diels-Alder reaction at low temperatures. Negative ΔG indicates a favored reaction, as the formation of new bonds decreases enthalpy and entropy, making the reaction exothermic.
The Gibbs Free Energy equation, ΔG = ΔH - TΔS, helps us understand why the Diels-Alder reaction is favored at low temperatures. In this equation, ΔG represents the change in free energy, ΔH represents the change in enthalpy, T represents the temperature in Kelvin, and ΔS represents the change in entropy.
At low temperatures, the value of T in the equation is small, which means that the temperature term (TΔS) will also be small. Since the ΔG value determines whether a reaction is spontaneous or not, a negative ΔG indicates that the reaction is favored.
In the case of the Diels-Alder reaction, the formation of new bonds results in a decrease in enthalpy (ΔH < 0), making the reaction exothermic. Additionally, the reaction leads to a decrease in entropy (ΔS < 0) due to the formation of a more ordered product.
When we plug these values into the Gibbs Free Energy equation, the negative values of ΔH and ΔS contribute to a negative ΔG. At low temperatures, the small temperature term (TΔS) does not significantly affect the overall value of ΔG. Therefore, the reaction is favored and spontaneous at low temperatures.
In summary, the Gibbs Free Energy equation shows that the Diels-Alder reaction is favored at low temperatures due to the negative values of ΔH and ΔS, which lead to a negative ΔG.
To know more about Gibbs Free Energy equation Visit:
https://brainly.com/question/13795204
#SPJ11
construct triangle xyz in which xy is 8.2 angle xyz is 40° angle xzy is 78° measure xy . using ruler and compass only construct the locus of a point equidistant from y and z and construct a point Q on this locus , equidistant from yx and yz
a. triangle XYZ
Draw a line segment XY of length 8.2 cm using a ruler.At point X, draw a ray with an angle of 40° using a compass. Label the intersection of this ray with XY as point Z.From point Z, draw another ray with an angle of 78°, again using a compass. Label the intersection of this ray with XY as point Y.Triangle XYZ is now constructed, with XY measuring 8.2 cm, angle XYZ measuring 40°, and angle XZY measuring 78°.b. Locus of a point equidistant from Y and Z:
Draw arcs with centers at points Y and Z using a compass. Ensure that the arcs intersect.Label the intersection points as A and B.Draw a line segment AB, which represents the locus of points equidistant from Y and Z.c. Construct point Q on this locus, equidistant from YX and YZ:
Draw arcs with centers at points Y and Z using a compass, with the same radius as before.Let the arcs intersect YX at point C and YZ at point D.Draw a line segment CD, which represents the locus of points equidistant from YX and YZ.Point Q is the intersection of line segment AB and line segment CD.How to construct the pointsTo construct a line, we have to;
Draw the longest side of the triangle using a rulerUse a compass to draw an arc from each endpoint of the line, Draw a line from the endpoint of each side of the basLabel the angles and side, leaving the construction lines .Learn more about construction of triangles at: https://brainly.com/question/31275231
#SPJ1
1. Connectedness. (a) Let G be a connected graph with n vertices. Let v be a vertex of G, and let G' be the graph obtained from G by deleting v and all edges incident with v. What is the minimum number of connected components in G', and what is the maximum number of connected components in G'? For each (minimum and maximum) give an example. (b) Find a counterexample with at least 7 nodes to show that the method for finding connected components of graphs as described in Theorem 26.7 of the coursebook fails at finding strongly connected components of directed graphs. Explain in your own words why your chosen example is a counterexample. (c) Prove by induction that for any connected graph G with n vertices and m edges, we have n < m + 1.
(a) The minimum number of connected components in G' is 1, and the maximum number of connected components in G' is n-1. An example for the minimum case is when G is a complete graph with n vertices and v is any vertex in G.
An example for the maximum case is when G is a graph with n vertices and each vertex is disconnected from all other vertices except v, which is connected to all other vertices.
(b) A counterexample to the method for finding strongly connected components is a directed graph with at least 7 nodes, where the graph contains a cycle that includes a node with multiple outgoing edges but no incoming edges. In this case, the method fails because it assumes that every node in a strongly connected component can reach any other node in the component, which is not true in the counterexample.
(c) We will prove by induction that for any connected graph G with n vertices and m edges, we have n < m + 1.
Base Case: For n = 1, there are no edges, so m = 0. Thus, 1 < 0 + 1 is true.
Inductive Step: Assume the statement holds true for a connected graph with k vertices and m edges. We will prove that it holds true for a connected graph with k+1 vertices and m+1 edges.
By adding one more vertex and one more edge to the existing graph, we create a connected graph with (k+1) vertices and (m+1) edges.
Since k < m + 1, it follows that k+1 < m+1 + 1. Hence, the statement holds true for the (k+1) case.
By the principle of mathematical induction, the statement holds true for any connected graph G with n vertices and m edges.
To learn more about mathematical induction visit:
brainly.com/question/29503103
#SPJ11