A mass on a
string is swung in a circle of radius 1.0m
at a speed of 5.0mls. What is the period of
revolution?​

Answer:

i think its Hydrodynamics

Explanation:

because hydro is fluid

Answer:

The difference between mass and weight is that mass is the amount of matter in a material, while weight is a measure of how the force of gravity acts upon that mass.

Explanation:

Answer: [tex]0.1066\ psi, 15.611\ kN[/tex]

Explanation:

Given

the height of the tank is [tex]h=10\ cm[/tex]

The diameter of the tank is [tex]d=520\ cm[/tex]

Density of solution [tex]\rho=0.75\ g/cm^3\ or\ 750\ kg/m^3[/tex]

[tex](a)[/tex] Water pressure at the bottom of the tank is

[tex]P=\rho gh\\P=750\times 9.8\times 0.1\\P=735\ Pa[/tex]

[tex]1\ Pa=0.000145038\ psi[/tex]

[tex]\Rightarrow P=735\ Pa\ or\ 0.1066\ psi[/tex]

[tex](b) \text{Average force on the bottom is the product of pressure and area of the base}[/tex]

[tex]F_{avg}=735\times \pi \cdot (\frac{520}{200})^2\\\\F_{avg}=735\times 3.142\times 6.76\\F_{avg}=15,611.34\ N\ or\ 15.611\ kN[/tex]

Answer:

A. FUSION REQUIRES VERY HIGH PRESSURE AND TEMPERATURE

Explanation:

Fission is used in nuclear power reactors since it can be controlled, while fusion is not utilized to produce power since the reaction is not easily controlled and is expensive to create the needed conditions for a fusion reaction.

Nuclear Power Plants uses Nuclear Fission over Nuclear Fusion to generate electric energy because "Nuclear Fusion requires very high pressure and temperature".

Nuclear fission is a reaction in which the nucleus of an atom splitting into two or more smaller nuclei and this process produces gamma photons and releases large amount of energy by the energetic standards of radioactive decay.

The Nuclear Fission process was discovered by Hahn, Strassman and Meitner in 1938.

Nuclear Fusion is a reaction in which two or more Atomic Nuclei are combined together to form one or more different atomic nuclei and subatomic particle.

The difference in mass between the reactants and products is manifested as either the release or the absorption of energy.

Robert Atkinson and Fritz Houtermans in 1929 measured masses of light elements to show that large amounts of energy could be used released by fusing small nuclei.

Nuclear Fusion cant be used as a source of energy for heat and electricity generation because developing technology for the required purpose is the subject of ongoing research which is at its nascent stage because to reach to Nuclear Fusion , one requires very high pressure and temperature and to reach such point in one closed area is quite a herculean task.

But Scientists are working towards Nuclear Fusion as it is more advantageous over Nuclear Fission and less pollutant.

Therefore, the correct answer will be option (A)

To learn more about Nuclear Fission or Fusion here

https://brainly.com/question/913303

#SPJ2

Answer:

Node:-

A node is a point along a standing wave where the wave has minimum amplitude. For instance, in a vibrating guitar string, the ends of the string are nodes. By changing the position of the end node through frets, the guitarist changes the effective length of the vibrating string and thereby the note played.

Anti Node:-

An antinode is simply a point along a medium which undergoes maximum displacement above and below the rest position.

Wavelength:-

The total length of circle.

or

Wavelength can be defined as the distance between two successive crests or troughs of a wave.

Answer:

a. E = 2452.5 J = 2.45 KJ

b. P.E = 981 J = 0.98 KJ

c. K.E = 1471.5 J = 1.47 KJ

d. vf = 14 m/s

Explanation:

a.

At the highest point the total energy is equal to the potential energy of the object:

E = Potential Energy = mgh

where,

E = Total energy =?

m = mass of object = 25 kg

g = acceleration due to gravity = 9.81 m/s²

h = height = 10 m

Theerfore,

E = (25 kg)(9.81 m/s²)(10 m)

E = 2452.5 J = 2.45 KJ

b.

P.E = mgh

where,

h = 4 m

Therefore,

P.E = (25 kg)(9.81 m/s²)(4 m)

P.E = 981 J = 0.98 KJ

c.

First, we will find the velocity at 4 m by using the third equation of motion:

[tex]2gh = v_f^2-v_i^2[/tex]

where,

h = height lost = 10 m - 4 m = 6 m

vf = final speed = ?

vi = initial speed = 0 m/s

Therefore,

[tex]2(9.81\ m/s^2)(6\ m) = v_f^2-(0\ m/s)^2\\v_f = \sqrt{117.72\ m^2/s^2} \\v_f = 10.85\ m/s[/tex]

Hence, the kinetic energy will be:

[tex]K.E = \frac{1}{2} mv_f^2\\\\K.E = \frac{1}{2} (25\ kg)(10.85\ m/s)^2[/tex]

K.E = 1471.5 J = 1.47 KJ

d.

We will find the velocity at the bottom by using the third equation of motion:

[tex]2gh = v_f^2-v_i^2[/tex]

where,

h = height lost = 10 m

vf = final speed = ?

vi = initial speed = 0 m/s

Therefore,

[tex]2(9.81\ m/s^2)(10\ m) = v_f^2-(0\ m/s)^2\\v_f = \sqrt{196.2\ m^2/s^2} \\[/tex]

vf = 14 m/s

Answer:

ii. N

Explanation:

N is not laterally symmetrical. so it shows inversion in a mirror.

Answer:

ii) N

hope it is helpful to you

Answer:

the f is 1.3 m

Explanation:

Given that

An object 2.0m is from the concave mirror

And, the image is 4.0m from the mirror

We need to find out the f

So,

u = -2 m

v = -4 m

1 ÷ f = 1 ÷ v + 1 ÷ u

= (-1 ÷ 4) + (-1 ÷ 2)

= -3 ÷4

f = -4 ÷ 3

= |1.3| m

Hence, the f is 1.3 m

Answer: A. The Sun

Explanation: A. The Sun makes water move through the water cycle

Answer:

1.08 x 10^5 J

Explanation:

First, apply the formula V = IR , where V is the voltage, I is the current and R is the resistance.

R -> 20 ohm (Given)

I -> 3A (Given)

Hence, V = 3 x 20 = 60V (60 volts)

Next, apply the formula E = Pt , where E is the energy produced, P is the power and t is the time in seconds

Furthermore, since P = IV (power = current x voltage)

The formula can be re-expressed as E = VIt

t -> 10 minutes = 600 seconds (don't forget to convert time to seconds!)

Therefore, energy = (60 x 3 x 600) J

                              = 108000 J

                               = 1.08 x 10^5 J (in scientific notation)

Hea produced in the resistance = energy produced in the resistor

                                                      = 1.08 x 10^5 J

Answer: A) as speed changes, wavelength changes and frequency remains constant

Explanation: edg test

Based on the data provided about the collision;

The magnitude of the impulse due to the collision of the vehicle with the wall is calculated using the formula of the impulse on an object given below as follows:

Impulse = change in momentum

Change in momentum = m(v - u)

where;

m is mass

v is the final velocity

u is the initial velocity

Impulse = 1759 (12 - 22)

Impulse = 21105.8 kg.m/s

The average force on the automobile will be:

Force = impulse/time

Force = 21105.8 / 0.11

Force = 191870.91 N

Learn more about force and impulse at: https://brainly.com/question/20586658

#SPJ1

Answer:

c. more redder

def not blue cuz thats hottest and def not luminous

Answer:

it is c... redder

Explanation:

because i just look it up on googl3

Answer:

STATIC friction acts on objects that are not moving........

Explanation:

DOES THIS HELPS!!

Answer:

Number 19

10 x 7.2

72N

Explanation:

20.

1.66 x 7.2

11.9

Which is approximately

12N

The total work done by this force is 28.9-1457.86 N m.

Total work is the sum of all the energy expended in completing a job or task. It is the amount of effort and energy expended to accomplish a goal or complete a task. Total work can be calculated by adding up all of the individual components of the job or task, such as time, effort, and materials.

The total work done by this force can be calculated using the formula W = F * Δx, where F is the force vector, and Δx is the displacement vector. In this case, the total work done is:
W = (4.70-379, 2.09) * (4.25, 3.69-245) = (19.9-944.81, 8.00-513.05) N m
Therefore, the total work done is 28.9-1457.86 N m.

To learn more about total work
https://brainly.com/question/25573309
#SPJ1

Answer:

The answer is "530 nm".

Explanation:

[tex]d=0.180 \ nm=0.180 \times 10^{-3} \ m\\\\L= 5.05\ m\\\\\Delta y= 1.62\ cm= 1.62 \times 10^{-2} \ m\\\\[/tex]

Using formula:

[tex]\Delta y=\frac{\lambda L}{d}\\\\\lambda =\frac{d\Delta y}{L}\\\\[/tex]

  [tex]=\frac{0.180 \times 10^{-3} \times 1.62 \times 10^{-2} }{5.05}\\\\=5.30 \times 10^{-9} \times \frac{1 \ nm}{10^{-9} \ m}\\\\=530 \ nm[/tex]

Answer;

Amount of time the two substances are in contact

Area in contact between the two substances

Specific heat of the material that makes up the substances

Explanation;

The change in temperature of a substance is caused by heat energy. The change in temperature will depend on factors such as mass of the substance, the type of material it is made from, the time taken , specific heat of the material that makes the substance, and also the area of contact.

The amount of time the two substances are in contact affect the change in temperature such that if the two bodies are in contact for a longer time then a bigger change in temperature will be observed.

Specific heat capacity also determines the change in temperature that will be observed, such that a substance with a bigger specific heat capacity will record a small change in temperature.

Answer:

24.4

Explanation:

you would add all the numbers , 25.5+24.4+24.2= 73.1/3=24.36 and you round up you get 24.4

In (Figure 2), the wrong with panel B is: Field line can not cross each other the field lines should be parallel because of the sheers summoner.

In general, an electric field line is a curve drawn with each point's tangent pointing in the direction of that point's net field. To designate the direction of the electric field from the two potential directions provided by a tangent to the curve, an arrow on the curve is obviously required. A field line is a space curve, or a three-dimensional curve.

The wrong with panel B is: Field line can not cross each other.

Learn more about electric field line here:

https://brainly.com/question/14438235

#SPJ1

===================================================

Explanation:

vi = 5 and vf = 8 are the initial and final velocities respectively. The change in time is t = 20 seconds.

So,

x = 0.5*(vi + vf)*t

x = 0.5*(5+8)*20

x = 130 meters

represents the distance traveled. The first equation shown above is one of the four kinematics equations.

Answer:

A. 9.203 × 10⁻¹⁰ kg

B.  2.82 × 10¹⁰ V/m

C. 5.56 × 10³ V/m

Explanation:

A. Calculate the mass (in kg) of the hovering droplet if its radius is measured to be 65 um.

We know density, ρ = mass of oil drop, m/volume of oil drop, v

m = ρv

ρ = 800 kg/m³ and v = 4πr³/3 (ince the oil drop is a sphere) where r = radius of oil drop = 65 μm = 65 × 10⁻⁶ m.

So, m = ρv = ρ4πr³/3

= 800 kg/m³ × 4π(65 × 10⁻⁶ m)³/3

= 800 kg/m³ × 4π274625 × 10⁻¹⁸ m³/3

= 878800000π × 10⁻¹⁸ kg/3

= 2760831623.97 × 10⁻¹⁸ kg/3

= 920277207.99 × 10⁻¹⁸ kg

= 9.203 × 10⁻¹⁰ kg

B. Calculate the electric field (in V/m) required to counter the weight of the above droplet if it carries a charge q = 2e.

Since the electric force F = qE where q = charge on oil drop  = 2e where e = electron charge = 1.602 × 10⁻¹⁹ C and E = electric field equals the weight of the oil drop W = mg where m = mass of oil drop = 9.203 × 10⁻¹⁰ kg and g = acceleration due to gravity = 9.8 m/s².

So, F = W

qE = mg

E = mg/q

E = mg/2e

substituting the values of the variables into the equation, we have

E = 9.203 × 10⁻¹⁰ kg × 9.8 m/s²/(2 × 1.602 × 10⁻¹⁹ C)

E = 90.1894 × 10⁻¹⁰ kg-m/s²/3.204 × 10⁻¹⁹ C

E = 28.15 × 10⁹ V/m

E = 2.815 × 10¹⁰ V/m

E ≅ 2.82 × 10¹⁰ V/m

C. In the second trial, the hovering droplet has a mass of 10-15 kg. It carries a charge of q = 11e. calculate the electric field (in V/m) required to counter the weight of this droplet.

Since F = W

qE = mg

E = mg/q

E = mg/11e

E = 10⁻¹⁵ kg × 9.8 m/s²/(11 × 1.602 × 10⁻¹⁹ C)

E = 9.8 × 10⁻¹⁵ kg-m/s²/17.622 × 10⁻¹⁹ C

E = 0.556 × 10⁴ V/m

E = 5.56 × 10³ V/m

Answer:

666.7 W

Explanation:

Power = P = W/t = 4000 J/6 s = 666.7 W (watts)

The acceleration of the snowboarder is 0.466 m/s².

Acceleration is the rate of change of velocity.

To calculate the acceleration of the snowboarder, we use the formula below.

Formula:

Where:

From the question,

Given:

Susbtitute these values into equation 1

Hence, the acceleration is 0.466 m/s².

Learn more about acceleration here: https://brainly.com/question/460763

#SPJ1

If deceleration = 5 m/s²

then acceleration = -5 m/s²

According to third law of motion,

= v² = 2as + u²

= v² = 2×-5×10 + 27²

= v² = -100 + 729

= v =√ 629

= 25.08 m/s

Answer:

the  correct  answers B

It needs to be moving horizontally at a high speed, in order for the satellite to stay in orbit once it's released from the rocket.

Explanation:

In this exercise, let's look for the solution to the problem before reviewing the statements to find out which one is correct.

When the satellite is in orbit it must comply with Newton's law

          F = m a

the force of the universal attractive force and the acceleration is centripetal

          a = v² / r

we substitute

         - G m M /r² = -m v² / r

            v² = G M / r

            v = [tex]\sqrt{\frac{GM}{r} }[/tex]

When analyzing this expression, the satellite is in a stable orbit because its centripetal acceleration creates a change in the direction of the velocity in such a way that it remains in an orbit

when reviewing the  correct  answers B

Answer:

Therefore The hypothesis is not plausible Because

[tex]P.E \geq P.E_e[/tex]

[tex]P.E=12.435*10^{-5}J \geq 1.4*10^{-7}J[/tex]

Explanation:

From the question we are told that:

Mass [tex]M=0.45mg[/tex]

Jump height [tex]h=3.5cm \approx 0.03m[/tex]

Percentage strain [tex]\mu =100\%[/tex]

Generally the equation for potential energy is mathematically given by

[tex]P.E=mgh[/tex]

[tex]P.E=0.45*10^{-3}*9.8*0.03[/tex]

[tex]P.E=12.435*10^{-5}J[/tex]

Generally the equation for Elastic potential energy is mathematically given by

[tex]P.E_e=0.5*stress*strain *volume[/tex]

[tex]P.E_e=0.5*1*2*10^6*1*1.4*10^{-4*(10^-3)^3}[/tex]

[tex]P.E_e=1.4*10^{-7}J[/tex]

The hypothesis is only plausible at conditions where

[tex]P.E\leq P.E_e[/tex]

Therefore The hypothesis is not plausible Because

[tex]P.E \geq P.E_e[/tex]

[tex]P.E=12.435*10^{-5}J \geq 1.4*10^{-7}J[/tex]

Answer:

Percent error can be reduced by improving both your accuracy and precision.

Answer:

Percent error can be reduced by improving both your accuracy and precision.

Explanation:

Answer:

B.KEEN EYESIGHT thats for predators !

Explanation:

Herbivores have multiple stomachs to process tough foods, coats to blend in so they don't get eaten, and tough teeth for chewing on the plants. THEY DO NOT HAVE PREY, THEY ARE THE PREY.