A plane needs to reach a velocity of 250 kilometers per hour to take off and leave the runway. If the wind is blowing in the direction of takeoff at a velocity of 20 kilometers per hour, what velocity must the plane reach in order to take off? a. 12.5 hours b. 230 kilometers per hour c.270 kilometers per hour d.500 kilometers ​

Answer:

Yes

Explanation:

Yes, bluetooth devices work in a frequency range between 2.4 - 2.485GHz. Outside this frequency the devices will not communicate with each other correctly. This frequency equals a wavelength of around 1cm. Therefore, any change in the amplitude or wavelength would need to be in relation to each other in order to maintain the frequency in the required range for the bluetooth device to work accordingly. If one increases while the other remains the same it can easily change the frequency to outside the range.

According to the question, you would need to add a 40 µF capacitor in order to produce a total capacitance of 50 µF.

What is the capacitor?

An electrical component known as a capacitor stores energy in an electric field. It is made up of two metal plates separated by an insulator, such as air, paper, plastic, or ceramic. When a voltage is applied to the plates, a charge is stored in the electric field. This charge can then be released when the voltage is removed. Capacitors are used in a variety of applications, such as providing energy storage in power supplies, filtering signals in electronic circuits, and providing energy to motors in electrical devices. They can also be used to balance out electrical loads in a circuit, and provide a steady current for the circuit. Capacitors can vary in size, shape, and material depending on the application.

In this case, 90 µF + 40 µF = 130 µF, and 130 µF - 90 µF = 40 µF. Therefore, you would need to add a 40 µF capacitor to the 90 µF capacitor to achieve a total capacitance of 50 µF.

To learn more about capacitor

https://brainly.com/question/13578522

#SPJ4

Answer:

v₁ = 54 cm/s

Explanation:

This question can be solved using the law of conservation of momentum:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = m₂ = m = mass of both balls

u₁ = pre-collision speed of cue ball = 82 cm/s

u₂ = pre-collision speed of 5-ball = 24 cm/s

v₁ = post-collision speed of cue ball = ?

v₂ = post-collision speed of 5-ball = 52 cm/s

Therefore,

[tex]m(82\ cm/s)+m(24\ cm/s)=m(v_1)+m(52\ cm/s)\\v_1 = 82\ cm/s + 24\ cm/s - 52\ cm/s\\[/tex]

v₁ = 54 cm/s

Answer:

R = V / i, units is Ω

Explanation:

The Ohm law establishes the relationship between voltage and current

         V = i R

          R = V / i

hence the relationship between voltage and current of the magnitude of the resistance.

The units are

        R = [V / A] = [Ω]

The velocity of the launched marble is 7.98 m/s. Using the formula by equation kinetic energy and potential energy.

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the ground as opposed to falling to the ground, it has more potential energy. It is capable of performing more work when raised.

The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

Calculations:

Total kinetic energy will get converted into potential energy

[tex]\frac{1}{2} m V^{2}[/tex] =  [tex]m g h[/tex]

M = mass

V = initial velocity

h = maximum height

[tex]V = 2 g h^{0.5}[/tex]

   =  [tex](2 * 9.8 * 3.25 )^{0.5}[/tex]  = 7.98 m/s.

To know more about velocity, check out:

https://brainly.com/question/80295

#SPJ1

Mass of Jupiter=1.9×10

27

㎏=M

1

Mass of Sun=1.99×10

30

㎏=M

2

Mean distance of Jupiter from Sun=7.8×10

11

m=r

G=6.67×10

−11

N㎡㎏

−2

Gravitational Force, F=

r

2

GM

1

M

2

F=

(7.8×10

11

)

2

6.67×10

−11

×1.9×10

27

×1.99×10

30

F=4.16×10

23

N

In the renal medulla, a countercurrent mechanism keeps things in balance. The solution flows concurrently in the same direction. The solution flows in the opposite direction of the countercurrent flow.

Cross-current flow here, the liquids move in the opposing directions through the two tubes. One end of a tube in a single tube starts to flow a solution with a concentration of 0%, while the other end in the same tube starts to flow a solution with a concentration of 100%.

The kidneys have two countercurrent processes. They are the vasa recta and the Henle loop. The nephron's Henle's loop is a U-shaped structure. The two limbs of the vessel's two blood streams move in the opposing directions, creating countercurrents.

To know more about countercurrent

https://brainly.com/question/14949884

#SPJ4

energy takes 25 atmospheres of pressure to evaporate 1 kilogrammes liquid helium, and that pressure must be applied at or below the freezing point of helium, which is 458 °F.

From manufacturing sources to stockpiling and transfill facilities, liquid helium is normally delivered. Tankers with a capacity of 5,000 and 11,000 gallons have an annular space that is vacuum-sealed, nitrogen-shielded, and has multiple layers of insulation.

You need to chill helium gas to just a few temperatures above absolute zero in order to produce the liquid & superfluid states. By compressing the air and then releasing it through a tiny nozzle, this is accomplished. If you've used any aerosol, you may have noticed that the gas rapidly cools as it expands.

To know more about energy visit :

https://brainly.com/question/1932868

#SPJ4

A very powerful vacuum cleaner has a hose 2.27 cm in diameter. The atmospheric pressure is 1.00 atm=101,300 Pa. then vacuume cleaner generate the force F = 65.1 N

A line that is straight and cuts through the middle of a body or figure. Particularly: the length of a diameter; a line segment passing through the center of a circle with its ends on the circumference.

Given,

diameter of the nose is d= 2.86 cm

radius of the nose r= 1.43 cm = 1.43× [tex]10^{-2}[/tex] m

We know F=P.A

where P is the atmospheric pressure and A is the surface area of the circulsr nose F is the force exerted by vacuume cleaner on the air

∴ F=P ( [tex]\pi r^{2}[/tex])

we know atmospheric pressure, p=1.013×[tex]10^{5}[/tex] pa

F = 1.013 × [tex]10^{5}[/tex] × 3.14 (1.43 × [tex]10^{-2}[/tex]) ^2

⇒ 65.1 N

⇒ F = 65.1 N

To know more about diameter visit:

brainly.com/question/8182573

#SPJ4

Answer:

coal , oil and natural gas

Answer:

A?

Explanation: put them in order

Sorry if its wrong...

Answer:

It's A

Explanation:

It wants it in order from most dense to least. Wood is most dense so it's first, then water, and then air is last.

Answer:

through a chain reaction of particle collisions in a medium.

Explanation:

Answer:

forest

Explanation:

cause of the echo

Answer:

forest

Explanation:

very spacious enough to make echo

Explanation:

anyone use zoom

code:- 2574030731

pass:- HELLO

Z●●M

Answer: yes

Explanation:

not to sure

According to the above statement, 15800 N of tension is required to draw a cable at 3.0 m/s² of acceleration.

A force known as tension is connected here to tugging of an item like the a rope, cord, or chain. It resembles elastic potential energy a lot. When a thing is pulled out and brought under tension, as soon as that force is removed, it will naturally recover to its relaxed length.

F = ma

  = 2000 kg × 3.0 m/s²

  = 6000 N.

The body's weight and the load are added to create the tension force.

Thus T = w + ma

T = 9800 N + 6000 N

  = 15800 N.

As a result, 15800 N of tension is required to draw a wire at 3.0 m/s² of acceleration.

To know more about Tension visit:

https://brainly.com/question/24994188

#SPJ4

The complete question is-

A 2000 kg elevator is accelerated upward at a rate of 3.0 m/s2. What is the tension in the cable pulling the elevator upward when it experiences this acceleration?

The statement is False, there is no limit to the mass with which a star can be born.

A star is a celestial body comprised of a mass of gas, primarily hydrogen and helium, that gives off heat and light through nuclear fusion reactions in its core. Stars are the most widely recognized astronomical objects and serve as a fundamental reference point in astronomy. Stars come in a variety of sizes and colors and are classified based on their temperature, size, and luminosity.

There are many different types of stars, including main-sequence stars, red giants, white dwarfs, and neutron stars. Stars are formed when large clouds of gas and dust collapse under the force of gravity, causing the material to heat up and form a protostar. Over time, the protostar becomes hot enough to trigger nuclear fusion reactions, and it is at this point that the star becomes visible to observers on Earth. Stars eventually die out, either exploding as supernovae or fading away as white dwarfs. Starlight is the source of illumination for our night sky, and the beauty of stars has captivated humans since the dawn of time.

To learn more about Star visit here:

brainly.com/question/7379319

#SPJ4

The rate of acceleration at which Matt goes down the slide is equal to 5.32 m/s².

The normal force or [tex]F_{N}[/tex] acts perpendicular to the object.

The angle of inclination = 35°

cosθ = [tex]F_{N}[/tex]/mg

 [tex]F_{N}[/tex] = mgcosθ = 85 × 10 × cos 35

= 850 × 0.819 = 696.15 N

To find the force of friction,

μ = 0.050

[tex]F_{f}[/tex] = μ × [tex]F_{N}[/tex]

= 0.050 × 696.15 = 34.80 N

To find the downward component of weight that pulls him down the slide.

sinθ = [tex]F_{d}[/tex]/mg

[tex]F_{d}[/tex] = mgsinθ

= 85 × 10 × sin35

= 850 × 0.5736 = 487.56 N

To find the acceleration,

[tex]F_{net} = F_{d} - F_{f}[/tex]

 = 487.56 - 34.80 = 452.76 N

To solve for acceleration,

F = force = 452.76 N

m = mass = 85 kg

Force = mass × acceleration

a = F/m = 452.76/85 = 5.32 m/s²

To learn more about force here

https://brainly.com/question/1046166

#SPJ4

The time on the surface of an object would run most slowly on an object with the same mass as the Sun but twice as large in radius.

What is mass?

Mass is a measure of the amount of matter in an object and is typically expressed in kilograms (kg). It is an intrinsic property of matter and is different from weight, which is a measure of the force of gravity acting on an object. Mass is an important factor in determining the physical properties of an object, such as density, momentum, and inertia. Mass is also used to calculate the gravitational force between two objects, as well as the energy required to move it.

This is because the surface gravity of an object is inversely proportional to the square of its radius. Therefore, the object with the same mass as the Sun but twice as large in radius would have a much lower surface gravity, and time would run more slowly on its surface.

To learn more about mass

https://brainly.com/question/19385703

#SPJ4

Answer: 66.02dB

Explanation: We use the equation β=(10dB)㏒([tex]\frac{I}{I_0}[/tex])

[tex]I_{0}[/tex]= the threshold of hearing which is 1.0×[tex]10^{-12}[/tex]W/[tex]m^{2}[/tex]

Plug in our knowns β=(10dB)㏒([tex]\frac{4.0*10^{-6} }{1.0*10^{-12} }[/tex])=66.02dB

Answer:

The speed the car must travel to experience no friction is approximately 16.9 m/s

Explanation:

The car and road data are;

The mass of the car, m = 1,200 kg

The radius of the road, r = 80 meters

Given that the angled at which the road is banked, θ = 20°

The friction between the tires and the road, at the required speed, [tex]\mu_s[/tex] = 0, No friction

We have;

[tex]\dfrac{v^2}{r \cdot g} = \dfrac{\left( sin \, \theta + \mu_s \cdot cos \, \theta \right)}{\left( cos\, \theta + \mu_s \cdot sin\, \theta \right)}[/tex]

Where [tex]\mu_s[/tex] = 0, we get;

[tex]\dfrac{v^2}{r \cdot g} = \dfrac{ sin}{ cos} = tan \, \theta[/tex]

∴ v² = r·g·tan(θ)

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

v = The speed at which the car travels

∴ v² = 80 m × 9.81 m/s² × tan(20°) = 285.64384 m²/s²

v = √(285.64384 m²/s²) ≈ 16.9 m/s

The speed with which the car must travel to experience no friction, v ≈ 16.9 m/s

In the table's Properties column, notably in the entry for the Guidance magnet, Rob made a mistake.

It is untrue to say that a quickly changing electromagnet's current propels a train forward. To create a levitation force that lifts the train off the tracks and enables it to float, the guidance magnets in a Maglev train really work by repelling the guiding magnets on the vehicle from the guideway.

In order to maintain the train's levitation and stability, the polarity of its steering magnets must change quickly rather than the current.

Superconducting magnets, which don't suffer any major energy losses when repelling another magnet, are frequently used in Maglev trains. Instead, a repelling force produced by the magnets lifts the train off the rails and enables it to float.

The mistake is that the guidance magnets should push the train ahead and increase friction, not by repelling the magnets on the train from the guideway and creating a levitation force.

To learn more about magnets visit:

brainly.com/question/2841288

#SPJ4

By definition we have to:

Applied force: It is the external force that acts directly on a body.

Therefore, we can say that if you have an object and push it towards yourself, you are exerting an external force on the object.

This external force was not acting on the object previously, therefore, it is a force that you are applying at that moment.

Answer:

you exert an Applied Force on an object when you pull it towards you

A. Applied Force

The correct statement about the very first stars in the universe is that they were made only from hydrogen and helium.

What is universe?

The universe is the totality of existence, encompassing all matter, energy, space, and time, and the physical laws and constants that govern them. It is the sum total of all that exists, was, and will be, including all galaxies, planets, stars, and phenomena such as light, gravity, and electromagnetic radiation. The universe is believed to have originated with a massive explosion known as the Big Bang, estimated to have occurred around 13.8 billion years ago. Since then, the universe has been expanding outward, ever increasing in size, complexity, and energy density. Scientists believe that the universe is composed of a vast array of components, including dark matter, dark energy, and dark radiation.

To learn more about universe

https://brainly.com/question/15324953

#SPJ4

The orbital speed of Dactyl is approximately 0.0173 meters per second.

To calculate the orbital speed of a Dactyl, we can use the formula:

v = √(G * M / r) where:

So, v = √( (6.67 x 10^-11 N*(m^2)/(kg^2)) * (4.5 x 10^16 kg) / (90 x 10^3 m) )

        = √ ( 2.98 x 10^-5 m/s^2 )

        = 0.0173 m/s

Therefore, the orbital speed of Dactyl is approximately 0.0173 meters per second.

Learn more about orbital speed here:

https://brainly.com/question/22247460

#SPJ4

Torque =   force x distance from point of rotation

Torque is a measure of the turning effect of an applied force about a specific point or axis. It is calculated by multiplying the force applied to an object by the distance from the point of rotation to the point where the force is applied. The greater the force or the longer the distance from the point of rotation, the greater the torque. The unit of torque is typically Newton-meters (N·m) in the International System of Units (SI) or pound-feet (lb·ft) in the imperial system. Torque is essential in various fields such as physics, mechanics, engineering and robotics.

To know more about Torque click below:

https://brainly.com/question/6855614#

#SPJ4

Yes, seismic-wave velocity can change as the waves pass through different rock types.

Rocks with high porosity and permeability tend to have lower seismic-wave velocities because the pores contain fluid that can dampen the energy of the seismic waves, while rocks with high compaction and densities tend to have higher seismic-wave velocities. Additionally, changes in temperature and pressure can also affect seismic-wave velocity.

Seismic sounders are seismic instruments that use a wide range of sound frequencies to measure the Earth's subsurface structure, composition, and its response to seismic waves generated from a source.

They are used in the exploration of oil, gas and mineral resources and for investigating earthquake and volcanic processes.

Learn more about seismic sounders:

https://brainly.com/question/15073818

#SPJ4

Answer:

Explanation:

Gases move from high-pressure areas to low-pressure areas. And the bigger the difference between the pressures, the faster the air will move from the high to the low pressure. That rush of air is the wind we experience.

Answer:

points are needed

Explanation:

Answer:

3.7845976673 m/s²

Explanation:

The boys' acceleration will be 3.785 m/s². It is the rate of change of the velocity on the inclined plane.

It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. Its unit is Newton(N).

Mathematically, it is defined as the product of the coefficient of friction and normal reaction.

On resolving the given force and acceleration in the different components and balancing the equation gets. Components in the x-direction.

From Δ ABC

[tex]\rm sin 37^0 = \frac{F}{mg} \\\\ F= mg sin37^0[/tex]

[tex]\rm cos 37^0 = \frac{F_N}{mg } \\\\\ F_N= mg cos 37^0[/tex]

Components and balancing the equation gets. Components in the x-direction.

[tex]\rm F-F_N = mg sin 37^0 - \mu (mg cos 37^0) = ma \\\\ mg (sin37^0 -\mu cos 37^0 )= ma \\\\ 9.81 (0.386 ) = a \\\\ a= 3.785 \ m/sec^2[/tex]

Hence, the boys' acceleration will be 3.785 m/s².

To learn more about the friction force, refer to the link;

https://brainly.com/question/1714663

#SPJ2

The airplane that starts from rest and accelerates at 1 constant 3 m/s2 for 30 s before leaving the ground moved by the distance of 1350m.

Acceleration is given as 3.00 m/s2

Time is 30 sec.

The formula we can use in this case is:

s = ut + 0.5 at^2

v = at + u

where,

s is distance travelled

u is initial velocity = 0 since at rest

t is time travelled

a is acceleration

v is the final velocity when it took off

a. s = 0 + 0.5 * 3 * 30^2

s = 1350 m

The distance moved by the airplane is 1350 m.

To know more about acceleration:

brainly.com/question/28743430

#SPJ4