Answer: B. When reactants collide with enough energy to intersect their valence shells and form new bonds.
single displacement or NR (no reaction)
Lead (II) + Nitric acid → ? + ? (Product)
Answer:
There will be a displacement reaction, with Lead (II) + Nitric acid → Lead (II) Nitrate + Hydrogen.
Explanation:
In the reactivity series, Lead is more reactive than Hydrogen (within the nitric acid) meaning that it will displace it forming Lead(II) Nitrate and Hydrogen gas.
This leads to the equation:
Lead (II) + Nitric acid → Lead (II) Nitrate + Hydrogen
Pb (s) + 2HNO3 (aq) → Pb(NO3)2 (aq) + H2 (g)
If the nitric acid was dilute (which the question does not mention, so shouldn't be mentioned) however it will form:
Lead (II) + Nitric acid → Lead (II) Nitrate + Nitrogen Dioxide + Water
Pb (s) + 4HNO3 (aq) → Pb(NO3)2 (aq) + 2NO2 (g) + 2H2O (l)
Hope this helps!!!
What is the CN covalent bond that is formed between the carboxyl group of an amino acid?
The CN covalent bond that is formed between the carboxyl group (-COOH) of an amino acid and the amino group (-NH2) of another amino acid is called a peptide bond.
Peptide bonds are formed through a condensation reaction, where a molecule of water is removed, and the carboxyl group of one amino acid combines with the amino group of another amino acid, forming a peptide bond and releasing a molecule of water. This process can be repeated to form longer chains of amino acids, known as polypeptides or proteins. Peptide bonds are strong and stable, and they play a critical role in the structure and function of proteins in living organisms.
Amino acids are the building blocks of proteins, and they are joined together by peptide bonds to form polypeptides and proteins. Peptide bonds are formed through a condensation reaction, where the carboxyl group of one amino acid reacts with the amino group of another amino acid, releasing a molecule of water. The resulting covalent bond is a peptide bond, which is a type of CN covalent bond.
To know more about Amino acids, visit: brainly.com/question/14583479
#SPJ4
2. What would the volume of air inside a 40. 0 L tire under 218 kPa of pressure occupy if it all escaped into a balloon at 101. 3 kPa?
The volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure is 86.1 L.
To calculate the volume of air inside a 40.0 L tire under 218 kPa of pressure that would occupy at 101.3 kPa pressure, we can use the following formula, known as Boyle's law:
P₁V₁ = P₂V₂
where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.
In this case, we know:
P₁ = 218 kPa
V₁ = 40.0 L
P₂ = 101.3 kPa
V₂ = ?
Now we can rearrange the formula to solve for V₂:
V₂ = (P₁ x V₁) / P₂
Substituting the values, we get:
V₂ = (218 kPa x 40.0 L) / 101.3 kPa
= 86.1 L
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
Classify the organisms based on how they obtain food.
Answer:
First, I will give you a brief summary of what heterotrophs and autotrophs are:
Autotrophs are known as producers because they are able to make their own food from raw materials and energy. Examples include plants, algae, and some types of bacteria. Heterotrophs are known as consumers because they consume producers or other consumers. Dogs, birds, fish, and humans are all examples of heterotrophs.
Now, to get to the question.
The first option, which is the image of trees and grass will go into the autotroph box. This is because plants make food for themselves.
The second option, which is the image of the tiger, will go in the heterotroph box. This is because tigers eat foods like deer and wild boar, and those are heterotrophs.
The third option, which is the image of the deer, belongs in the heterotroph box. deers eat plants to survive, which are autotrophs, meaning that a deer is a heterotroph.
The fourth option, which is the image of some algae, belongs in the autotroph box. As I explained before, all algae are autotrophs.
The fifth option, which is the image of a human, belongs in the heterotroph box. Humans can't produce any food by themselves, so that makes them a heterotroph.
Finally, the last option, which is the image of some carrots, belongs in the autotroph box. Carrots provide their own food for themselves.
I hope this could help you! A brainilist is highly appreciated and helpful!
the slope of the titration curve near the equivalence point is steep group of answer choices true false
It is true that the slope of titration curve near equivalence point is steep.
How is the slope of the titration curve near the equivalence point?The slope of the titration curve near the equivalence point is steep because there is a rapid change in pH with the addition of small amount of titrant. At the equivalence point, all the analyte has reacted with titrant, and the solution contains only salt and water. Any further addition of titrant causes a rapid increase in pH . The steepness of slope depends on the strength of acid and base involved, as well as their concentrations.
The point at which chemically equivalent quantities of reactants have been mixed is known as equivalence point of a chemical reaction .
To know more about equivalence point, refer
https://brainly.com/question/2496608
#SPJ1
which of the following is not one of the forms of vitamin a in your body and in food listed in the video? a.retinol b.retinoic acid c.retinal d.retinase e.retinyl esters
Retinase. Vitamins don't help to raise how many calories or how much energy the human body needs.
What three forms does vitamin A come in?Dietary supplements that contain vitamin A are often preformed vitamin A in the form of retinyl acetate or retinyl palmitate, provitamin A in the form of beta-carotene, or a combination of preformed and provitamin A.
What variations of vitamin A are there in the body?Preformed vitamin A (retinol, retinyl esters) and provitamin A carotenoids like alpha- and beta-carotene that are converted to retinol are the two main forms of vitamin A in the human diet. Animal products, fortified meals, and vitamin supplements are sources of preformed vitamin A.
To know more about Vitamins visit:-
brainly.com/question/10840252
#SPJ1
what key absorbance indicative of starting material 2-methylcyclohexanone should be absent? give wavenumber, bond type and functional group.
The key absorbance indicative of starting material 2-methyl cyclohexanone that should be absent is the carbonyl stretch at around [tex]1710-1735 cm^{-1}.[/tex] , the bond type is C=O and the functional group is Ketone.
Infrared spectroscopy is a useful technique in identifying functional groups in organic compounds. The carbonyl stretch, which is typically found at 1710-1735 cm^-1, is a characteristic absorption band for ketones and aldehydes. Since 2-methyl cyclohexanone is a ketone, it should exhibit this absorption band in its infrared spectrum.
However, if this band is absent in the spectrum, it suggests that the compound has undergone a chemical reaction and the carbonyl functional group has been transformed into a different functional group. The absence of the carbonyl stretch at around 1710-1735 cm⁻¹ is indicative of the absence of the starting material, 2-methyl cyclohexanone.
This peak is characteristic of the C=O bond stretch in a ketone functional group. In 2-methyl cyclohexanone, this bond is present in the starting material but absent in the product after the reaction.
The bond type and functional group of this key absorbance are:
Bond type: C=O bond
Functional group: Ketone (C=O group attached to two alkyl or aryl groups)
By observing the absence of this peak in the IR spectrum of the product, we can confirm that the reaction has taken place and the starting material has been consumed. This technique is commonly used in organic chemistry to monitor the progress of reactions and determine the identity of products.
To know more about Infrared spectroscopy, refer here:
https://brainly.com/question/13265448#
#SPJ11
A piece of dry ice (solid carbon dioxide) with a mass of 28. 8 g sublimes (converts from solid to gas) into a large balloon. Assuming that all of the carbon dioxide ends up in the balloon, what is the volume of the balloon at 22 °C and a pressure of 742 mmHg?
If all of the carbon dioxide is absorbed by the balloon, its volume is 0.0175 L, or 17.5 mL.
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of carbon dioxide in the dry ice sample. We can do this by dividing the mass of the dry ice by its molar mass. The molar mass of carbon dioxide is 44.01 g/mol.
n = 28.8 g / 44.01 g/mol = 0.654 mol
Next, we need to determine the volume of the balloon. Since the carbon dioxide is a gas, we can use the ideal gas law to solve for the volume of the gas.
V = nRT/P
Before we can substitute the values into the equation, we need to convert the temperature to Kelvin. To do this, we add 273.15 to the Celsius temperature.
T = 22 °C + 273.15 = 295.15 K
Substituting the values into the equation, we get:
V = (0.654 mol)(0.08206 L·atm/mol·K)(295.15 K)/(742 mmHg)
Note that we have converted the pressure from mmHg to atm by dividing by 760, which is the number of mmHg per atm.
V = 0.0175 L
Therefore, the volume of the balloon is 0.0175 L, or 17.5 mL, assuming that all of the carbon dioxide ends up in the balloon.
To learn more about ideal gas law refer to:
brainly.com/question/28257995
#SPJ4
2. State a chemical test you could perform to distinguish between unlabelled samples of the following
solutions. Give the expected observations.
a) sodium sulfate & calcium nitrate
b) sodium sulfate & sodium nitrate
c) strontium nitrate & strontium hydroxide
d) barium chloride & lithium chloride
3. Compound A gives a lilac flame test colour and produces a white precipitate when added to a solution
of barium chloride. Identify compound A.
Answer:
2. Chemical tests to distinguish between unlabelled samples of the following solutions and their expected observations are:
a) Sodium sulfate and calcium nitrate: Add dilute hydrochloric acid to the unknown solution. Calcium nitrate will produce a white precipitate while sodium sulfate will not produce any precipitate.
b) Sodium sulfate and sodium nitrate: Add silver nitrate solution to the unknown solution. Sodium nitrate will produce a white precipitate of silver chloride while sodium sulfate will not react.
c) Strontium nitrate and strontium hydroxide: Add dilute hydrochloric acid to the unknown solution. Strontium hydroxide will produce a white precipitate while strontium nitrate will not produce any precipitate.
d) Barium chloride and lithium chloride: Add a few drops of dilute sulfuric acid to the unknown solution, followed by a few drops of a solution of potassium dichromate. Barium chloride will produce a green color while lithium chloride will not show any color.
3. Compound A giving a lilac flame test color and producing a white precipitate when added to a solution of barium chloride indicates the presence of potassium ion (K+). Therefore, compound A is most likely potassium chloride (KCl).
how many grams of calcium carbonate are necessary to weigh out 9.50 moles?
The molar mass of calcium carbonate (CaCO₃) is approximately 100.09 g/mol. The gram is commonly used to measure the mass of small objects, such as food items, coins, and jewelry.
What is a gram ?A gram is a unit of mass in the metric system, abbreviated as It is defined as one-thousandth of a kilogram, which is the base unit of mass in the International System of Units (SI).
It is also used in scientific measurements, such as in chemistry and physics, to express the mass of atoms, molecules, and other particles.
To calculate the mass of 9.50 moles of calcium carbonate, we can use the following formula:
mass = moles x molar mass
Substituting the given values, we get:
mass = 9.50 moles x 100.09 g/mol
mass = 950.45 g
Therefore, 9.50 moles of calcium carbonate would have a mass of approximately 950.45 grams.
To know more about mass visit :
brainly.com/question/12127497
#SPJ1
researchers estimated that 0.07%, by mass, of a 12-gram sample of an orchid plant consists of the fattyacid eicosadienoic acid. based on this estimate, whatis the mass of eicosadienoic acid, in grams, in thisorchid sample?
The mass of eicosadienoic acid, in grams, in thisorchid sample is 0.0084 grams.
In this particular question, we are asked for the mass of eicosadienoic acid, in grams, in a 12-gram sample of an orchid plant based on an estimate that 0.07% (percent by mass), of the sample consists of this fatty acid. To solve this problem, we can use a simple proportion:
0.07/100 = x/12
where x is the mass of eicosadienoic acid, in grams, in the 12-gram sample. To solve for x, we can cross-multiply and simplify:
0.07 × 12 = 100 × x
0.84 = 100x
x = 0.0084 grams
Therefore, the mass of eicosadienoic acid in the 12-gram sample of the orchid plant is 0.0084 grams.
Learn more about percent by mass here: https://brainly.com/question/26150306
#SPJ11
help me plesa.Which of the following are examples of negative tropism? (Select all that apply.)
a plant’s stem growing upward out of the ground
a plant’s leaves growing away from the sunlight
a plant’s leaves growing toward the direction of the sun
a plant’s roots growing down into the soil
Examples of negative tropism would be:
A plant’s leaves growing away from the sunlightA plant’s roots growing down into the soilWhat is negative tropism?Negative tropism is the growth or movement of a plant away from a stimulus, such as light or gravity.
In the case of the examples given, the plant's leaves growing away from the sunlight is an example of negative phototropism, while the plant's roots growing down into the soil is an example of negative geotropism.
Thus, the two examples of negative tropism are:
A plant’s leaves growing away from the sunlightA plant’s roots growing down into the soilMore on negative tropism can be found here: https://brainly.com/question/22044063
#SPJ1
predict what precipitate will form when a solution of aluminum chloride is mixed with a solution of potassium phosphate. AlPO4NaCl Na3Cl3 Al3PO4
When a solution of aluminum chloride is mixed with a solution of potassium phosphate, a precipitate of aluminum phosphate (AlPO4) will form. The reaction between aluminum chloride and potassium phosphate can be represented as follows: AlCl3 + K3PO4 → AlPO4 + 3KCl .
This is due to the fact that the aluminum ion (Al3+) and the phosphate ion (PO43-) can react to form a solid precipitate, which is insoluble in water.
Therefore, when a solution of aluminum chloride is mixed with a solution of potassium phosphate, a white precipitate of aluminum phosphate (AlPO4) will form, while potassium chloride (KCl) will remain in solution.
To know more about aluminum phosphate (AlPO4), here
brainly.com/question/15146433
#SPJ4
A 2.498M solution contains 245 g of HzSO4 What is the volume of the solution? The Periodic Table of Elements EE
The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1L.
Explanation:To find the volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4, follow these steps:
1. Determine the molar mass of H2SO4. From the Periodic Table of Elements, the molar masses of H, S, and O are approximately 1 g/mol, 32 g/mol, and 16 g/mol, respectively.
So, the molar mass of H2SO4 = (2 x 1) + 32 + (4 x 16) = 2 + 32 + 64 = 98 g/mol.
2. Calculate the moles of H2SO4 in the solution.
Moles = mass/molar mass = 245 g / 98 g/mol = 2.5 mol.
3. Determine the volume of the solution using the molarity formula.
Molarity (M) = moles/volume (L).
Rearrange the formula to solve for the volume: volume (L) = moles/M = 2.5 mol / 2.498 M = 1 L.
The volume of the 2.498 M H2SO4 solution containing 245 g of H2SO4 is 1 liter.
To know more about molar mass calculation, visit: https://brainly.com/question/22997914
#SPJ11
At standard pressure, which substance becomes less soluble in water as temperature increases from 10.°C to 80.°C?
answer choices
KCl
HCl
NaCl
NH4Cl
Answer:
HCl
Explanation:
The substance is HCl as reference table G shows HCl becomes less soluble as the temperature increases from 10 C to 80 C.
a mixture of gases contains 0.31 mol ch 4 , 0.25 mol c 2 h 6, and 0.29 mol c 3 h 8. the total pressure is 1.50 atm. calculate the partial pressures of the gases
The partial pressures of each gas in the mixture are: 0.325 atm for CH4, 0.263 atm for C2H6, and 0.412 atm for C3H8.
To calculate the partial pressure of each gas, we need to first find the total moles of gas in the mixture. The total moles can be calculated by adding up the moles of each gas:
Total moles = 0.31 mol CH₄ + 0.25 mol C2H₆ + 0.29 mol C3H₈ = 0.85 mol
Next, we can calculate the mole fractions of each gas:
Mole fraction of CH₄ = 0.31 mol / 0.85 mol = 0.365
Mole fraction of C2H₆ = 0.25 mol / 0.85 mol = 0.294
Mole fraction of C₃H₈ = 0.29 mol / 0.85 mol = 0.341
Finally, we can calculate the partial pressures of each gas by multiplying the mole fraction by the total pressure:
Partial pressure of CH₄ = 0.365 x 1.50 atm = 0.325 atm
Partial pressure of C₂H₆ = 0.294 x 1.50 atm = 0.263 atm
Partial pressure of C₃H₈ = 0.341 x 1.50 atm = 0.412 atm
Therefore, the partial pressures of each gas in the mixture are: 0.325 atm for CH₄, 0.263 atm for C2H₆, and 0.412 atm for C₃H₈.
To know more about partial pressure, refer here:
https://brainly.com/question/31214700#
#SPJ11
a 100.0 ml sample of 0.18 m hcl is titrated with 0.27 m naoh. what is the ph of the solution after the addition of 30.0 ml of naoh?
The pH of the solution after the addition of 30.0 ml of 0.27 M NaOH in titration is 1.43.
To find the pH of a solution, we use the formula given below:
pH = -log [H+]
where [H+] denotes the concentration of H+ ions (hydrogen ions).
This formula is based on the fact that pH is a measure of the acidity or basicity of a solution. It is the negative logarithm of the hydrogen ion concentration.
Therefore, the pH scale ranges from 0 to 14. The pH scale ranges from 0 to 14, with 7 representing neutral. pH < 7 is acidic, while pH > 7 is basic (alkaline).
Steps to find the pH of the solution
Step 1: Calculate the number of moles of HCl present in the given solution:
moles of HCl = Molarity × volume (in liters)
= 0.18 mol/L × 0.1000 L
= 0.018 mol
Step 2: Calculate the number of moles of NaOH added to the solution:
moles of NaOH = Molarity × volume (in liters)
= 0.27 mol/L × 0.0300 L
= 0.0081 mol
Step 3: Calculate the total number of moles of NaOH after it has been added to the solution:
moles of NaOH = 0.0081 mol + excess NaOH (due to the reaction with HCl)
Step 4: Calculate the number of moles of HCl that reacted with NaOH:
moles of HCl reacted with NaOH = 0.0081 mol (since NaOH and HCl react in a 1:1 ratio)
Step 5: Calculate the number of moles of HCl remaining after the reaction:
moles of HCl remaining = 0.018 mol - 0.0081 mol = 0.0099 mol
Step 6: Calculate the concentration of H+ ions in the solution:
[H+] = moles of H+ / volume (in liters)
= 0.0099 mol / 0.1000 L
= 0.099 mol/L
Step 7: Calculate the pH of the solution:
pH = -log [H+] = -log (0.099) = 1.043
Note: The final pH should be corrected for the dilution of the solution due to the addition of NaOH.
Therefore, pH would be 1.43.
To know more about titration, refer here:
https://brainly.com/question/2728613#
#SPJ11
PROVIDE 3 REASONS THESE EROSION RATES MAY HAVE DROPPED DURING THE TIME PERIOD GIVEN
The three possible reasons why erosion rates may have dropped during the time period given are more likely due to Conservation practices, Land-use changes and Technological advances.
Here are three possible reasons why erosion rates may have dropped during the time period given:
1. Conservation practices: There has been increased adoption of conservation practices on agricultural lands, such as conservation tillage, cover cropping, and terracing, which reduce soil erosion rates.
These practices help to conserve soil moisture, promote soil health, and minimize soil disturbance, all of which help to reduce erosion rates.
2. Land-use changes: Land-use changes may have led to a reduction in erosion rates. For example, the conversion of marginal cropland to permanent vegetation cover, such as grassland or forest, can significantly reduce erosion rates.
Additionally, the reduction in tillage practices for crop production and the use of perennial crops with deeper roots can help to stabilize soils and reduce erosion rates.
3. Technological advances: Technological advances in soil conservation practices, such as the development of precision agriculture and real-time weather monitoring, have also contributed to the reduction in erosion rates.
These advances enable farmers to tailor their agricultural practices to site-specific conditions, thereby minimizing soil erosion rates.
For example, precision agriculture technologies can be used to optimize fertilizer and pesticide applications, reducing soil disturbance and runoff, while real-time weather monitoring allows farmers to adjust their practices in response to changing weather conditions.
For more question on erosion click on
https://brainly.com/question/27714548
#SPJ11
a second student makes a buffer by dissolving 0.100 mol of nano2(s) in 100. ml of 1.00 m hno2(aq). which is more resistant to changes in ph when a strong acid or a strong base is added, the buffer made by the second student or the buffer made by the first student in part (c)? justify your answer.
The buffer solution made by second student is more resistant to changes in pH when a strong acid or a strong base is added.
Generally buffer solution is defined as a water solvent based solution that consists of a mixture which contains a weak acid and also the conjugate base of the weak acid, or a weak base and also the conjugate acid of the weak base. Basically buffer solution are capable of resisting a change in pH upon dilution or upon the addition of small amounts of acid/alkali to them.
Here, the concentration of the second student is 10 times higher than the first student and due to this it has a greater capacity to neutralize acids and bases.
Learn more about buffer solution from the link given below.
https://brainly.com/question/24262133
#SPJ4
100 POINTS! Please help! (silly answers will be reported)
How many grams of NO2 can be produced from 15.0 g of NO and 5.60 g of O2 according to the equation:
2 NO + O2
2NO2
Answer:
16.1 g
Explanation:
We want to find how many grams of NO₂ can be produced from 15.0 g of NO and 5.60 g of O₂ according to the balanced chemical equation:
[tex]\sf 2 NO + O_2\;\; \longrightarrow \;\;2NO_2[/tex]
First, convert the given masses of both reactants, NO and O₂, to moles using their respective relative formula masses [tex]\sf(M_r)[/tex].
Relative formula masses:
[tex]\sf M_r\;of\;NO: 30.01\;g/mol[/tex][tex]\sf M_r \; of\; O_2: 31.999\;g/mol[/tex]Therefore:
[tex]\sf moles\;of\;NO=\dfrac{mass\;(g)}{M_r}=\dfrac{15.0}{30.01}=0.500[/tex]
[tex]\sf moles\;of\;O_2=\dfrac{mass\;(g)}{M_r}=\dfrac{5.60}{31.999}=0.175[/tex]
Now look at the ratio of the reactants:
2 mol NO : 1 mol O₂ = 0.5 mol NO : 0.25 mol O₂
There are only 0.175 moles of O₂ (instead of 0.25 moles), so the O₂ will run out first. It is the limiting reactant.
Use the moles of the limiting reactant to calculate the mass of the product, remembering to use the molar ratio between the limiting reactant and the product.
Limiting reactant : product = 1 mol O₂ : 2 mol NO₂
Therefore, 0.175 mol O₂ will make 0.35 mol NO₂.
Finally, convert the moles of NO₂ to grams:
[tex]\begin{aligned}\sf Mass\;of\; NO_2 &= \sf moles \times M_r \\&= \sf 0.35 \times 46.0055\\ &= \sf 16.1\; g\end{aligned}[/tex]
what type of orbitals overlap to form the n-h bond in nh3?
The three hydrogen atoms in an [tex]NH_{3}[/tex] hybridization will be centred around the nitrogen atom. Only the s orbitals of the hydrogen atoms overlap those sp3 orbitals.
An sp3 orbital in N crosses over with a s orbital in H to form the N-H bond. The second option is the proper response. This is because the nitrogen atom in [tex]NH_{3}[/tex] has four electron domains that together create four sp3 orbitals.
An sp3 orbital in N crosses a s orbital in H to form the N-H bond.
Tetrahedral in shape, the nitrogen atom in [tex]NH_{3}[/tex] contains four hybridised sp3 orbitals that house its four valence electrons. A hydrogen atom's valence electron is situated in a s orbital. The N-H bond is produced when the sp3 hybrid orbital of a nitrogen atom and the s orbital of a hydrogen atom overlap.
This overlap is due to the covalent bond that is created when nitrogen and hydrogen share electrons. Accurate orbital overlap that leads to the formation of the N-H bond in [tex]NH_{3}[/tex]
To know more about nitrogen atom, click the below link
brainly.com/question/2396742
#SPJ4
what is the mass of 2.00 moles of ca(oh)2? group of answer choices 122.5 g 222.4 g 148.2 g 74.1 g 56 g
The mass of 2.00 moles of Ca(OH)₂ is 148.2 g.
What is a mole?A mole is a unit of measurement used in chemistry to represent particles, such as atoms, molecules, or ions. A mole is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12.
Moles and mass are directly proportional to each other since they both represent the quantity of substance.
Moles = Mass/Molar mass
Mass = Moles x Molar mass
The molar mass of Ca(OH)₂ is calculated as follows:
Molar mass of Ca = 40.1 g/mol
Molar mass of O = 16.0 g/mol
Molar mass of H = 1.0 g/mol2 atoms of oxygen, 2 atoms of hydrogen, and 1 atom of calcium are present in Ca(OH)₂.
Therefore, the molar mass of Ca(OH)₂ = 40.1 g/mol + 2(16.0 g/mol) + 2(1.0 g/mol) = 74.1 g/mol
The mass of 2.00 moles of Ca(OH)₂ = Moles × Molar mass= 2.00 × 74.1= 148.2 g
Hence, 148.2 g is the mass of 2.00 moles of Ca(OH)₂.
Learn more about moles on:
https://brainly.com/question/29367909
#SPJ11
write word problem for 6ml of 3% h2o2 in a clean test tube, add a tiny amount of mno2 to test tube and loosely stopper the tube, after 15-20 seconds hold at 45
The resulting solution will contain 0.18 mL of MNO2 and be 0.01% in concentration.
To solve this problem, let's first set up the equation:
6 mL * 3% H2O2 = X mL * Y% MNO2
Next, let's solve for X and Y:
X = 6 mL * 3% = 0.18 mL
Y = 0.18 mL / 6 mL * 3% = 0.01%
Now that we have X and Y, we can answer the question.
Given 6 mL of 3% H2O2 in a clean test tube, add a tiny amount of MNO2 to the test tube and loosely stopper the tube. After 15-20 seconds, hold the tube at 45 degrees. The resulting solution will contain 0.18 mL of MNO2 and be 0.01% in concentration.
Know more about equations
https://brainly.com/question/17145398
#SPJ11
what experimental evidence do you have that 1-bromobutane is the major product, instead of 2-bromobutane?
There are a number of experimental findings that show 1-bromobutane to be the major product over 2-bromobutane like kinetics of reaction, stereochemistry of the reaction and quantitative comparison of the reaction rates.
First, the kinetics of the reaction. Because the SN2 mechanism requires the nucleophile to attack the primary carbon at a 180 degree angle, 2-bromobutane will be a bit slower to react than 1-bromobutane. As a result, when the reaction is allowed to run for a certain amount of time, more 1-bromobutane is formed. Second, a quantitative comparison of the reaction rates of the two substrates.
Because the SN2 reaction mechanism is so sensitive to steric hindrance, a quantitative comparison of the reaction rates of the two substrates could be carried out to determine which one is the better substrate. This would be a direct experimental measurement of the relative reactivity of the two substrates, and would show that 1-bromobutane is more reactive than 2-bromobutane.
Finally, the stereochemistry of the reaction products. When a stereocenter is created during an SN2 reaction, the resulting product is always an enantiomeric pair of molecules. Because the SN2 reaction requires the nucleophile to attack the primary carbon from the back side, the product will be a pair of enantiomers with opposite stereochemistry.
If 1-bromobutane is the major product, then the product will be a pair of enantiomers with opposite stereochemistry. If 2-bromobutane is the major product, then the product will be a pair of enantiomers with the same stereochemistry. So, by analyzing the stereochemistry of the product, we can determine which substrate is the better SN2 substrate.
To know more about 1-bromobutane, refer here:
https://brainly.com/question/30841540#
#SPJ11
I need help with this!! it’s due by the end of the day
The second question asks “What is the percentage of water in the hydrated sample?”
A. The number of moles of water that were absorbed is 0.094 mole
B. The percentage of water in the hydrate is 25.4%
1. How do i determine the mole of water?The number of mole water absorbed can be obtain as follow:
Mass increase = 1.70 grams Mass of water = Mass increase = 1.70 grams Molar mass of water = 18 g/mol Mole of water =?Mole = mass / molar mass
Mole of water = 1.70 / 18
Mole of water = 0.094 mole
B. How do i determine the percentage of water?We can obtain the percentage of water as follow:
Mass of water = 1.70Mass of anhydrous = 5.00 gramsMass of hydrate = 11.7 + 5 = 6.7 gramsPercentage of water =?Percentage of water = (mass of of water / mass of hydrate) × 100
Percentage of water = (1.7 / 6.7) × 100
Percentage of water = 25.4%
Learn more about mole:
https://brainly.com/question/13314627
#SPJ1
What are the factors that influence the intensity of an IR absorption band?
The factors that influence the intensity of an IR absorption band are: Concentration of the sample, Path length of the sample, Polarization of the radiation, temperature, Molecular dipole moment, Molecular weight.
Concentration of the sample: An increase in the concentration of the sample leads to an increase in the intensity of an IR absorption band.
Path length of the sample: The intensity of an IR absorption band is directly proportional to the path length of the sample.
Temperature: The intensity of an IR absorption band decreases with an increase in temperature. This is because the molecular vibrations decrease at higher temperatures.
Polarization of the radiation: The intensity of an IR absorption band depends on the polarization of the radiation. When the polarization of the radiation is perpendicular to the vibrational dipole moment of the molecule, the intensity is low. But, when the polarization is parallel to the vibrational dipole moment, the intensity is high.
Molecular dipole moment: The intensity of an IR absorption band is directly proportional to the molecular dipole moment of the molecule. This is because the change in dipole moment during the vibration is directly proportional to the intensity of the absorption band.
Molecular weight: The intensity of an IR absorption band is inversely proportional to the molecular weight of the molecule. This is because the larger the molecule, the lower the frequency of the absorption band.
Learn more about IR absorption band here:
https://brainly.com/question/31115658
#SPJ11
Please help me with this chemistry problem PLEASE!!
The theoretical yield of NH₄NO₃ in grams is 49.03 g (rounded to two decimal places).
nitrogen gas:
Convert the volume of nitrogen gas to moles using the ideal gas law: PV = nRT.
P = 1 atm (standard pressure), V = 16608 L, T = 20°C + 273.15 = 293.15 K, R = 0.08206 L·atm/mol·K
n = PV/RT = (1 atm)(16608 L)/(0.08206 L·atm/mol·K)(293.15 K) = 693.8 moles
Use the balanced chemical equation to determine the amount of product formed by nitrogen gas: 2 moles of N2 react to form 2 moles of NH₄NO₃ .
So, 693.8 moles of N2 would form 693.8/2 = 346.9 moles of NH₄NO₃ .
oxygen gas:
Convert the volume of oxygen gas to moles using the ideal gas law: PV = nRT.
P = 1 atm (standard pressure), V = 7.2123 L, T = 20°C + 273.15 = 293.15 K, R = 0.08206 L·atm/mol·K
n = PV/RT = (1 atm)(7.2123 L)/(0.08206 L·atm/mol·K)(293.15 K) = 0.3069 moles
Use the balanced chemical equation to determine the amount of product formed by oxygen gas: 1 mole of O2 reacts to form 2 moles of NH₄NO₃ .
So, 0.3069 moles of O2 would form 0.3069 x 2 = 0.6138 moles of NH₄NO₃ .
water:
Convert the volume of water to mass using its density:
Mass = Volume x Density = 7.2310 L x 1.00 kg/L x 1000 g/kg = 7231 g
Use the balanced chemical equation to determine the amount of product formed by water: 4 moles of H₂O react to form 2 moles of NH₄NO₃ .
So, 7231 g of H2O would form (2/4) x (7231 g/18.015 g/mol) = 201.2 moles of NH₄NO₃ .
Since oxygen gas forms the least amount of product, it is the limiting reactant. Therefore, we will use the amount of NH₄NO₃ formed by oxygen gas to calculate the theoretical yield.
The molar mass of NH₄NO₃ is 80.0434 g/mol.
The amount of NH₄NO₃ formed by oxygen gas is 0.6138 moles.
Therefore, the theoretical yield of NH₄NO₃ is (0.6138 mol) x (80.0434 g/mol) = 49.03 g.
The theoretical yield of NH₄NO₃ in grams is 49.03 g (rounded to two decimal places).
learn more about moles here
https://brainly.com/question/29367909
#SPJ1
co, co2, so2, no, and no2, most hydrocarbons, and most suspended particles which are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds are labeled as what general category?
The general category for compounds like CO, CO2, SO2, NO, NO2, most hydrocarbons, and most suspended particles which are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds is: air pollutants.
Air pollutants are any type of gaseous, solid, or liquid substance that are released into the atmosphere. These pollutants come from a variety of sources including industrial facilities, vehicles, and the burning of fossil fuels. They can also be naturally occurring and caused by events like volcanic eruptions.
Pollutants such as CO, CO2, SO2, NO, NO2, hydrocarbons, and suspended particles can enter the atmosphere in a variety of ways. In many cases, they can be released directly from an industrial facility or a vehicle. They can also be released as a result of chemical reactions that occur in the atmosphere or from other sources such as the burning of fossil fuels.
Once in the atmosphere, air pollutants can mix vertically and horizontally with other substances and be dispersed and diluted by churning. This churning process can cause pollutants to react with other compounds such as ozone and form secondary pollutants. These secondary pollutants are often more harmful than the original pollutants and can contribute to smog and acid rain.
Air pollution can have negative impacts on both human health and the environment. Some of these impacts include increased respiratory problems, decreased visibility, and reduced crop yields. To reduce the amount of air pollution, governments and businesses are working to reduce emissions and promote cleaner technologies.
In conclusion, compounds such as CO, CO2, SO2, NO, NO2, hydrocarbons, and suspended particles that are mixed vertically and horizontally in our atmosphere and then dispersed and diluted by churning before they react with other compounds are categorized as air pollutants. These pollutants can cause a variety of health and environmental issues if not managed properly.
To know more about hydrocarbons refer here:
https://brainly.com/question/30907363#
#SPJ11
How are creating triglycerides from fatty acids and glycerol?
Triglycerides are formed by a process called esterification, in which fatty acids react with glycerol to form a molecule of triglyceride and three molecules of water. This process is catalyzed by enzymes known as lipases.
The chemical equation for the esterification of one molecule of glycerol with three molecules of fatty acid is as follows:
3 Fatty Acids + Glycerol → Triglyceride + 3 Water molecules
In this reaction, each of the three fatty acid molecules undergoes a condensation reaction with one of the hydroxyl (-OH) groups of the glycerol molecule.
This results in the formation of an ester bond between the fatty acid and the glycerol, and the release of one molecule of water. The reaction is repeated three times, resulting in the formation of a triglyceride molecule.
Triglycerides are a type of lipid that are stored in adipose tissue and serve as a source of energy for the body. They can be broken down by enzymes called lipases to release fatty acids and glycerol, which can then be used as a source of energy by the body.
To know more about Triglycerides here
https://brainly.com/question/5096426
#SPJ4
How does magma move within the mantle?
Magma is molten rock that exists beneath the Earth's surface, primarily in the mantle layer. The movement of magma within the mantle is driven by several factors, including heat, pressure, and gravity.
The mantle is a layer of the Earth's interior that extends from the bottom of the crust to the top of the core, and it is composed of solid rock. However, within the mantle, there are regions of the rock that are partially melted, forming magma. This magma is less dense than the surrounding solid rock and tends to rise towards the Earth's surface.
The movement of magma within the mantle is influenced by convection currents, which are caused by the heat generated by the Earth's core. These convection currents cause magma to rise towards the Earth's surface, where it may form volcanoes or other types of volcanic activity.
Additionally, the movement of tectonic plates can also play a role in the movement of magma within the mantle. As plates move apart, magma can rise up to fill the space between them, leading to the formation of new crust.
Overall, the movement of magma within the mantle is a complex process that is influenced by a variety of factors, including heat, pressure, gravity, and the movement of tectonic plates.