There is a drag force that opposes a person's motion while they are moving through a fluid, whether it be air or liquid. Range of motion is constrained by the drag force. Drag force is overcome by the suits. The drawback is overheating.
A bodysuit's main function is to give you support and a seamless tuck-in so you may dress comfortably and easily. Bodysuits can be skin-tight or loose, and because of the tension they create from the shoulders to the crotch, they can embrace your curves and serve as the ideal foundation for whichever bottom you choose.
They can be warm and tight or very thin - useful for warmth - or even be very light (say, 60g), cooling underwear. They are typically elastic and stretchy. They can serve as both underwear and outerwear, but a pair of trousers, pants, or a skirt must be worn below.
Benefits include being thin, warm or cooling, extremely snug, occasionally shapewear, suitable for layering, and warm without bulk (you can get a big deal from a 60g torso garment). fitting in.
They interfere with using the restroom and can occasionally make it difficult to distinguish their front from back sides. Typically, the longer portion of the crotch, called the tail, is at the back. The bodysuits without arms, however, can also be worn buttoned up.
To learn more about Body suits from given link
https://brainly.com/question/10619818
#SPJ4
A flashlight bulb is connected to two dry cells with an equivalent voltage of 4.50 V. If the bulb draws a current of 12.0 mA (1000mA = 1A), its resistance is (2 points) a 540. Ohms b 375 Ohms c 266 Ohms d 2.66 Ohms e 145 Ohms
Answer:
b. 375 Ohms
Explanation:
Given the following data;
Voltage = 4.5 V
Current = 12 mA
To find the resistance;
Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
[tex] V = IR[/tex]
Where;
V represents voltage measured in voltage. I represents current measured in amperes. R represents resistance measured in ohms.Conversion:
1000 mA = 1 A
12 mA = 12/1000 = 0.012 A
[tex] R = \frac {V}{I} [/tex]
Substituting into the formula, we have;
[tex] R = \frac {4.5}{0.012} [/tex]
Resistance, R = 375 ohms
A lever is used to lift an object with a weight of 60 Newtons. The effort force is 15 meters from the fulcrum, while the load force is 5 meters from the fulcrum. What is the mechanical advantage?
Answer:
Below
Explanation:
Mech adv = effort arm / load arm = 15 / 5 = 3
To solve this we must be knowing each and every concept related to force. and its different types. Therefore, the mechanical advantage is 3.
What is force?A force is an outside entity that has the power to alter a body's state of rest or motion. It has a direction and a magnitude. The point where forces are applied is determined either by the force's direction as well as the application of the force.
Your training at this level should place a major emphasis on the idea which a push or even a pull was refereed to as a force. In our daily lives, forces appear in a variety of ways. as in weight and power. It refers to the force a bat applies to a ball and the strength a hairbrush has when stroking hair.
Mech adv = effort arm / load arm = 15 / 5 = 3
Therefore, the mechanical advantage is 3.
To know more about force, here:
https://brainly.com/question/13014979
#SPJ2
Explain why the power of a train's engine must be increased to maintain the speed while travelling up a slope
Answer:
the power (outside) of the train must be increased for the increase in resistance by the weight component.
Explanation:
We analyze the movement of the train at constant speed, on flat ground the force of the motor must counteract the friction force that opposes the movement, therefore to maintain the constant speed the two forces must be of the same magnitude.
When the train goes up a slope, it is subjected to two forces: the friction force that opposes the movement and a component of the weight in the opposite direction to the movement, therefore the power (outside) of the train must be increased for the increase in resistance by the weight component.
If two objects collide and are stationary, what must the total momentum of the sum of the objects have been before collision?
Explanation:
Concept: In collision between two isolated bodies momentum is always conserved.
Also, if the collision is elastic kinetic energies are also conserved
m1v1i + m2v2i = m1v1f + m2v2f.
and in elastic collision
[tex]½m1v1i^2 + ½m2v2i^2 = ½m1v1f^2 + ½m2v2f^2.[/tex]
Momentum is preserved in collisions between two objects. The initial moment not being zero, the final momentum is not zero. This means both object has to be in motion.
However, it may be possible for one of the objects to be at rest after the collision. For instance, if the masses of the two objects are same, then after a head-on elastic collision the object initially at rest is moving and the object initially moving is at rest.
If I raise the temperature of a material by 5 K, what is the corresponding change in temperature on the Fahrenheit scale?
The corresponding change in temperature on the Fahrenheit scale More than 5°F.
In the Celsius scale, a temperature change of 5 degrees K corresponds to a shift of 50 degrees C. This is due to the fact that a temperature change of one degree Celsius is equivalent to a temperature change of one degree Kelvin. Tk = TC +273.15. We can observe that the relationship between the two temperature scales is linear and that its slope is the same for each.
The degree Celsius, denoted by the symbol °C, is the unit of temperature in Celsius and is by definition equal in magnitude to the kelvin unit. A temperature difference or interval can be stated in either kelvin or degrees Celsius, and in both cases the numerical value of the temperature difference is the same. However, the relationship between the numerical value of a thermodynamic temperature represented in kelvin and a Celsius temperature expressed in degrees Celsius exists.
To learn more about temperature in kelvin and Celsius from given link
https://brainly.com/question/10497952
#SPJ4
If the absolute temperature of an object is tripled, the thermal power radiated per unit surface area of this object will (assuming that its emissivity is not affected by the temperature change)?
Answer: increase by a factor of 81
A temperature increase of an order of 81 will cause an object's thermal output radiated per unit surface area to double, assuming that its emissivity is unaltered by the temperature change.
By dividing the Planck radiation density by a wavelength interval, you can compute it numerically.The rate of heat transfer through radiation emitted is controlled by the Stefan-Boltzmann law of radiation: Qt=σeAT4 The equation Q t = e A T 4 includes the Stefan-Boltzmann constant, A, the object's surface area, and T, the object's absolute temperature in kelvin.All bodies emit energy W depending on temperature T according to the Stefan-Boltzmann formula W = T4, where emissivity is equal to 1 for black bodies and less than 1 for grey ones, being the Stefan constant.To know more about Temperature here
https://brainly.com/question/24746268
#SPJ4
Find the y-component of this vector: 22.3 m 77.1° Remember, angles are measured from the +x axis.
Answer:
-21.7m
Explanation:
To find the y-component of the vector, we need to find the vertical displacement from the point at the bottom of the vector to the x-axis (or its y-coordinate value).
To calculate this we can create a triangle with the vector as the hypotenuse, the y-axis as the second side and draw an imaginary line from the end of the vector directly horizontally across to the y-axis.
We can use the given angle to find the angle between the y-axis and the angle. Since the angle of a quadrant is 90 degrees, the angle within our triangle must be [tex]90-77.1=12.9[/tex] degrees.
From here, to find the length of the side on the y-axis we can use the trigonometric cos function.
[tex]cos \theta =\frac{adjacent side}{hypotenuse}[/tex]
Therefore [tex]cos 12.9=\frac{y-component}{22.3}[/tex] and [tex]ycomponent = 22.3cos12.9[/tex]
This gives us a value of 21.7 (3.s.f) for our y-component.
Finally, the y-component is also a vector so it also needs a direction. Therefore like its coordinate, its value will be -21.7m.
To ensure your battery's longevity, you should keep the area where cables are connected to the positive and negative poles clean. T/F
True. Keeping the terminals and cable connections clean helps to ensure a good electrical connection, which can prolong the life of the battery.
Keeping the terminals and cable connections of a battery clean is important for prolonging the battery's life. Dirt, corrosion, or other buildup on the terminals can create resistance in the circuit, which can lead to overheating and damage to the battery. This can cause the battery to charge and discharge less efficiently, reducing its overall capacity and lifespan. To clean the terminals, you can use a wire brush or a toothbrush with baking soda and water to scrub away any corrosion. Then, dry the terminals and cables thoroughly before reconnecting them to the battery. This will ensure a good electrical connection and a longer-lasting battery.
To know more about battery click below:
https://brainly.com/question/19225854#
#SPJ4
A camera draws 0. 25 amps and with 72 ohms. What voltage supply does this camera need?
A camera that draws certain current with specified resistance needs a voltage supply which is calculated to be 18 V.
Given that,
Current i = 0.25 A
Resistance r = 72 ohms
Voltage supply v = ?
From Ohm's law, it is defined that, voltage across the conductor is directly proportional to the current flowing through it. Mathematically, it is represented as v = i r
where,
v is the voltage
i is the current
r is the resistance
Putting in the values, we have,
v = i r
v = 0.25 × 72 = 18 V
Thus, the required voltage supply by the camera is calculated to be 18 V.
To know more about voltage:
https://brainly.com/question/26998834
#SPJ4
Is any of this right?
Les mélange et le transformations de la matiers
Les molécules sont arrangées autrement, ce qui modifie l'aspect ou l'état de l'espèce chimique. Un mélange est une substance composée de plusieurs espèces chimiques qui ne réagissent pas ensemble, au contraire de la transformation chimique. Il s'agit donc d'une transformation physique, qui ne change pas la matière.
Select the correct answer. A boy is pushing a chair by applying a force of 5 newtons. His mother helps him push it faster by applying an additional force of 7 newtons in the same direction. What is the net force acting on the chair
Answer:
The net force is now 12
Explanation:
The boy is applying a force of 5 newtons + his mother is helping him to apply 7 newtons = 12 newtons.
Identify work or a task that you’d like to make easier by using a device or tool. Here are a few possibilities: Easily pick up paperclips or pins that have fallen on the floor. Make a bed in less time. Move laundry from a basket into a washing machine without bending down. Sweep the floor without bending down. Rinse a collection of dishes at the same time. Efficiently pass salt and pepper shakers around a table. Rescue somebody from a high place. Choose a task from the list or, better yet, come up with your own. Explain how your tool or device will make the task easier. Note the simple machines that the tool or device will use.
The work or a task that I'd like to make easier by using a device or tool is sweeping the floor without bending down through the use of a vacuum cleaner.
What is a Device?This is referred to as a mechanical or electronic equipment which is made or adapted for a particular purpose and makes work easier and faster through technological advancement.
In the case of sweeping the floor without bending down, a vacuum cleaner is most appropriate as it uses an electric motor that spins a fan, thereby resulting in the sucking in of air and any small particles caught up in it thereby making it the correct device to be used.
Read more about Device here https://brainly.com/question/28498043
#SPJ1
the first artificial satellite to orbit the earth was sputnik 1, launched october 4, 1957. the mass of sputnik 1 was 83.5 kg, and its distances from the center of the earth at apogee and perigee were 7300 km and 6610 km, respectively. find the difference in gravitational potential energy for sputnik 1 as it moved from apogee to perigee
The difference in gravitational potential energy for sputnik 1 as it moved from apogee to perigee is 193 kJ.
The gravitational potential energy of an object in orbit around the Earth can be calculated using the equation:
U = -GMm/r
where U is the gravitational potential energy, G is the gravitational constant, M is the mass of the Earth, m is the mass of the object.
The difference in gravitational potential energy as the satellite moves from apogee to perigee can be found by calculating the potential energy at each point and subtracting the two values:
U(apogee) = -(6.67 x 10^-11 N*(m^2)/(kg^2)) * (5.972 x 10^24 kg) * (83.5 kg) / (7300 x 10^3 m)
U(perigee) = -(6.67 x 10^-11 N*(m^2)/(kg^2)) * (5.972 x 10^24 kg) * (83.5 kg) / (6610 x 10^3 m)
U(apogee) = -1.865 x 10^5 J
U(perigee) = -2.058 x 10^5 J
The difference in gravitational potential energy is:
= U(perigee) - U(apogee)
= -2.058 x 10^5 J - (-1.865 x 10^5 J)
= 193 x 10^3 J
So, the difference in gravitational potential energy for Sputnik 1 as it moved from apogee to perigee is 193 kJ.
To know more about potential energy please refer: https://brainly.com/question/24284560
#SPJ4
explain how you would produce a loud sound from the violin
Answer:
The energy of a vibrating string is transmitted through the bridge to the body of the violin, which allows the sound to radiate into the surrounding air. Both ends of a violin string are effectively stationary, allowing for the creation of standing waves.
Explanation:
Find the magnitude of the electric force between the charges 0.12 C and 0.33 C at a separation of 2.5 m. k=8.99×109N⋅m2/C2.
Answer:
F= k Q1 Q2 / r^2
plug in the numbers
Q. Diagram shows a sound wave as being displayed on an oscilloscope screen. Draw the waveform of another sound wave on the same diagram which has twice the pitch and is half as loud.
Answer:
i want points
Explanation:
Select the correct anwer from each drop-down menu. When a looe brick i reting on a wall, it ha
[ Select ]
(. )kinetic (. )potential (. )both kinetic and potential energy. When the brick i puhed off the wall and i falling down, the amount of
[ Select ]
(. )kinetic (. )potential (. )both kinetic and potential energy i decreaing while the amount of
[ Select ]
(. )kinetic (. )potential (. )both kinetic and potential energy i increaing
When a loose brick is resting on a wall, it has potential energy. When the brick is pushed off the wall and is falling down, the amount of potential energy is decreasing while the amount of kinetic energy is increasing.
Kinetic energy is motion––of waves, electrons, atoms, molecules, substances, and objects. Potential energy is stored energy and the energy of position––gravitational energy. There are several forms of potential energy.
Conservation of energy is not saving energy. The law of conservation of energy says that energy is neither created nor destroyed. When we use energy, it doesn’t disappear. We change it from one form of energy into another.
A car engine burns gasoline, converting the chemical energy in gasoline into mechanical energy. Solar cells change radiant energy into electrical energy. Energy changes form, but the total amount of energy in the universe stays the same.
Energy efficiency is the amount of useful energy you get from a system. A perfect, energy-efficient machine would change all the energy put in it into useful work—an impossible dream. Converting one form of energy into another form always involves a loss of usable energy.
To know more about kinetic energy here
https://brainly.com/question/12337396
#SPJ4
How does mass affect the heat that can be absorbed by a substance?
The mass of the material has no influence on specific heat because it is already a quantity represented per unit mass.
Casey Hudson, Drew Karpyshyn, and Preston Watamaniuk created the military science fiction media franchise Mass Effect. The franchise shows a distant future in which humans and many alien civilizations have conquered the known universe utilizing advanced predecessor civilizations' technologies.
The franchise began with a series of video games created by BioWare and released by Electronic Arts. Each iteration combines third-person shooting gameplay with role-playing features. The first three games comprise a trilogy in which the player character, Commander Shepard, strives to defend the Milky Way galaxy from the Reapers, a species of ancient, sleeping robots.
Learn more about mass affect to visit this link
https://brainly.com/question/29760670
#SPJ4
if you reverse the poles of battery what will happen to the direction Of the lines?
Answer: The battery casing will explode
Explanation: Hydrogen gas will be released because of the heat which may cause an explosion.
Electric potential energy can be maximized when
Answer:
d and f
Explanation:
A 1070-kg car starts from rest at the bottom of a drive way and has a speed of 3.00 m/s at a point where the drive way has risen a vertical height of 0.600 m. Friction and the drive force produced by the engine are the only two nonconservative forces present. Friction does -2870 J of work. How much work does the engine do
In the question the only nonconservative forces in play are friction and the engine's motive force. Work done by friction is -2870 J. The work done by the engine is 1285 J.
The work done by an engine can be determined by the change in kinetic energy of the car. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy. The initial kinetic energy of the car is 0 J (at rest) and the final kinetic energy of the car is 1/2mv^2, where m is the mass of the car and v is its final speed. The work done by the engine is equal to the change in kinetic energy of the car, which is the final kinetic energy minus the initial kinetic energy.Work_engine = change in kinetic energy = (1/2)mv^2 - 0
Work_engine = (1/2)(1070)(3)^2 = 4155 J. The work done by friction is -2870 J, which is negative because it is opposing the motion of the car. The net work done by nonconservative forces is the sum of the work done by the engine and the work done by friction. Net work = Work_engine + Work_friction = 4155 J + (-2870 J) = 1285 J. Therefore, the work done by the engine is 1285 J.
Learn more about work done here:
https://brainly.com/question/2750803
#SPJ4
Select the correct answer. A van traveling down a slope with a uniform acceleration of 2.15 meters/second2 attains a speed of 20.00 meters/second after 7.00 seconds. What is the initial velocity of the van
Answer:
Initial velocity of the van is 4.95m/s
Explanation:
Acceleration is found using the following formula:
[tex]a=\frac{v-u}{t}[/tex]
where:
a is acceleration ( in meters per second squared)
v is final velocity ( in meters per second)
u is initial velocity ( in meters per second)
t is time ( in seconds)
We know that:
[tex]a = 2.15m/s^{2}[/tex]
[tex]v = 20m/s[/tex]
[tex]t=7s[/tex]
Therefore, we can find the initial velocity by shifting around some values and making [tex]u[/tex] the subject within the acceleration formula by multiplying both sides by [tex]t[/tex]:
[tex]a[/tex] × [tex]t=v-u[/tex]
Followed by:
[tex]u = v-at[/tex]
Now we can substitute in the values we have:
[tex]u = 20-(2.15[/tex] × [tex]7)[/tex]
[tex]u = 20 - 15.05[/tex]
[tex]u=4.95m/s[/tex]
I need help! 20 points.
No system is completely closed off from its surroundings.
Which example represents a system that is almost completely closed?
a freezer with the door shut
a wood-burning fireplace
a cup of tea on a counter
a pot of simmering soup
Answer: a freezer with the door shut
Explanation:
Two points, point 1 and point 2, are located inside a region with an electric field pointing to the left, as shown in the figure. 1 50% Part (a) If a proton is moved from point 1 to point 2, how will the potential energy of the charge-field system change? How will the potential change?
If protons move in the direction of the electric field, the electric potential would change, and it decreases, but if you move opposite the field, the potential energy increases.
If the field is directed from lower potential to higher then the direction is taken to be positive. If the field is directed from higher potential to lower potential then the direction is taken as negative. Potential energy can be converted to kinetic energy and vice versa.
Potential energy is the stored energy in any object or system by virtue of its position or arrangement of parts. However, it isn't affected by the environment outside of the object or system, such as air or height.
To know more about proton:
https://brainly.com/question/13088059
#SPJ4
Mechanics sometimes use a piece of pipe to lengthen the handle of a wrench when trying to remove a very tight bolt. How does this make it easier for the mechanic to remove the bolt
Answer:
increase the length of the handle from the bolt, the torque will increase even if you have the same force
Explanation:
It allows them to apply more torque to the bolt. Torque is the turning or twisting force that causes rotation, in this case, it's applied to the bolt in an effort to loosen it. By lengthening the handle of the wrench, the mechanic is able to leverage more of their body weight and strength behind the wrench, increasing the torque they are able to apply to the bolt.
When a bolt is very tight, it can be difficult to turn it with a standard wrench. The increased torque provided by the longer handle allows the mechanic to apply more force to the bolt, which can help to loosen it. This can be particularly useful in situations where the bolt is corroded, rusted, or otherwise stuck due to a buildup of debris or other factors.
Sound energy is considered a form of kinatic energy because it's carried as vibrating waves. o T. True o F False
Answer:
True
Explanation:
Sound kinetic energy produces moving energy by using longitudinal waves. Sound is caused by the vibrations on or from an object, which is how it is considered a kinetic energy form.
A mass of 1.5 kg moves in a circle of radius 25 cm at 2.0 Hz. Calculate:
a) the velocity. b) the acceleration. c) the centripetal force acting on the mass.
Answer:
To solve this problem, you can use the following formulas:
Velocity (v) = 2πr * f
Acceleration (a) = v^2 / r
Centripetal force (F) = ma
In these formulas, r is the radius of the circle, f is the frequency of the circular motion, and m is the mass of the object.
a) To find the velocity of the mass, you can substitute the values given into the formula for velocity:
v = 2πr * f
= 2π(0.25 m) * 2.0 Hz
= 1.57 m/s
So, the velocity of the mass is approximately 1.57 m/s.
b) To find the acceleration of the mass, you can substitute the values given into the formula for acceleration:
a = v^2 / r
= (1.57 m/s)^2 / 0.25 m
= 4.45 m/s^2
So, the acceleration of the mass is approximately 4.45 m/s^2.
c) To find the centripetal force acting on the mass, you can substitute the values given into the formula for centripetal force:
F = ma
= 1.5 kg * 4.45 m/s^2
= 6.68 N
So, the centripetal force acting on the mass is approximately 6.68 newtons.
What is the Electromagnetic Spectrum? in your own words
The electromagnetic spectrum is a frequency system that shows the wavelengths and intensities of electromagnetic radiation.
What is the electromagnetic spectrum ?The electromagnetic spectrum is a frequency system that depicts electromagnetic radiation, wavelengths, and photon energies.
The electromagnetic spectrum that is seen as colors: violet, indigo, blue, green, yellow, orange, and red.
Radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays are examples of frequencies found in the electromagnetic spectrum.
Hence, the above definition introduce the electromagnetic spectrum.
To learn more about the electromagnetic spectrum,refer to the link;
https://brainly.com/question/15576247
#SPJ2
hello please help i’ll give brainliest
The correct answer is B.Antartica and Australia were one landmass millions of years ago.