The fulminate ion has the chemical formula CNO-, and its Lewis structure can be drawn as follows:
Place the carbon atom in the center since it is the least electronegative atom among C, N, and O.
Connect the carbon atom to the nitrogen atom with a triple bond, as nitrogen is more electronegative than carbon.
Connect the nitrogen atom to the oxygen atom with a single bond since oxygen is more electronegative than nitrogen.
Add a lone pair of electrons to the oxygen atom to satisfy its octet.
Place a negative charge on the oxygen atom since it has gained an extra electron.
The Lewis structure with all atoms and bonds is as follows:
markdown
O
||
C ≡ N -
||
H
All atoms except for the nitrogen atom have a formal charge of 0. The nitrogen atom has a formal charge of +1 because it has four valence electrons but only three bonding electrons. The oxygen atom has a formal charge of -1 because it has six valence electrons but seven electrons around it.
The Lewis structure can also be represented by showing the possible resonance forms:
makefile
O O
|| ||
C = N ↔ C ≡ N
|| ||
H H
In this case, the double bond is delocalized between the carbon and nitrogen atoms, and both resonance structures contribute to the overall electronic structure of the fulminate ion.
brainly.com/question/31184756
SPJ11
Why phenol is a weak acid?
Phenol is a weak acid because there is a lot of charge around the oxygen which tends to attract the hydrogen ion back again.
Generally a weak acid is defined as an acid that partially dissociate into it's ions in an aqueous solution. Basically phenol can donate a proton and behave as an acid. The phenoxide ion is formed by the donation of proton, and is stabilized due to delocalization of electrons.
Generally, oxygen is regarded as the most electronegative element in the ion and the delocalized electrons is usually drawn towards oxygen. Due to this attraction there will still be a lot of charge present around the oxygen which tends to attract the hydrogen ion back again and this is the reason why phenol is only a very weak acid.
Learn more about weak acid from the link given below.
https://brainly.com/question/22104949
#SPJ4
Write the complete ground-state electron configuration of Ag+. For multi-digit superscripts or coefficients, use each number in succession.
Answer:
[Kr] 4d^10 5s
Explanation:
Krypton is the nearest noble gas build structure off of that
The aluminum ground state electron configuration is 1s²2s²2p⁶3s²3p¹.
The electron configuration of aluminum will therefore be 1s²2s²2p⁶3s²3p¹. Scientists can easily write and communicate how electrons are arranged around an atom's nucleus using the configuration notation. It is now simpler to comprehend and predict how atoms will interact to form chemical bonds as a result.
The Aufbau Principle, Pauli-exclusion Principle, and Hund's Rule are the three key rules that we adhere to. By removing electrons from the outermost p orbital first, then the s orbital, and finally the d orbitals, the electronic configuration of cations is determined (if any more electrons need to be removed).
To know more about electron configuration visit:
brainly.com/question/29757010
#SPJ6
give an explain why the henderson hasselbalch equation can be used at the beginning and at the equivalence point of the titration
The Henderson-Hasselbalch equation can be used at the beginning and at the equivalence point of the titration because it relates the pH of a solution to the ratio of the concentration of the conjugate base and the weak acid of a buffer system.
At the beginning of a titration, the buffer system is intact, and the concentration ratio of the weak acid and its conjugate base remains constant. Therefore, the pH of the solution can be calculated using the Henderson-Hasselbalch equation.At the equivalence point of a titration, the moles of the acid and base in the solution are equal, and the buffer system is no longer present.
However, the Henderson-Hasselbalch equation can still be used to determine the pH of the solution because it relates the pH to the ratio of the concentration of the acid and the base. At the equivalence point, the concentration of the acid is equal to the concentration of its conjugate base, and the pH of the solution can be calculated using the Henderson-Hasselbalch equation.
Learn more about titration at:
https://brainly.com/question/13307013
#SPJ11
If aluminum has a density of 2. 7g/cm what is the volume in cubic centimeters found in 54 grams of aluminum
How many hydrogen atoms are in 2.0 GH
Answer:
2 hydrogen atoms
Explanation:
because the hydrogen atoms are two
explain why k values for these four reactions should all be approximately equal?
The value of k i.e. rate constant indicate the reaction is very fast. In this case, it is the first-order reaction.
The higher value in this case is the order of 12. The unit of k is (1/time) i.e. (1/s). The rate expression is given as follows
[tex]r_{A}=\frac{dC_{A}}{dt}=-kC_{A}..............(1)dC = -kdt..............................(2)[/tex]
If we consider the case of CA, for example, either Iodide ions as their concentration are small as compared to BrO3- and hydrogen ions, then iodide ion concentration is decreasing very fast.
Similar is the case for others. So, it increases the rate of reaction of the order of 12. The rate of disappearance of reactants mentioned in the table is almost high and it shows nearly the same value of k.
2. The rate of reaction is based on the concentration of the limiting reactant.
The rate of reaction is given by the following expression. Integrating equation(2) from initial concentration (CA0) to final concentration (CA),
[tex]\int_{C_{A0}}^{C_{A}}-\frac{dC_{A}}{C_{A}} = k\int_{0}^{t}dt-ln\frac{C_{A}}{C_{A0}}=kt[/tex]
There is no information about the initial concentration of reactants (CA0) i.e. initial volume of stock solution for each of the reactants.
to know more about equations click here:
https://brainly.com/question/2972832
#SPJ4
The complete question is:
Rates of Chemical Reactions: A Clock Reaction tab/-R e p o r t Name Time MTWRF Reaction # k" k, 3.68 x 10,2 Explain why values for these four reactions should all be approximately equal: Use the k above and the reactant concentrations from Part A to predict the relative rate and time (t) for reaction mixture #5 (show work): trek" relative rateprekted
Translate the given conformer from the wedge-and-dash drawing into its Newman projection.
Select the correct Newman projection using one of the tabs below, and drag the three groups (Cl, Br, and CH3) to their correct locations.
When translating the given conformer from the wedge-and-dash drawing into its Newman projection, there are steps to follow. These steps are explained below:
Step 1: Identify the axial and equatorial atoms in the conformer. Step 2: Determine which of the axial atoms will be in the front and which will be at the back. Step 3: Draw a circle and divide it into four sections. Step 4: Place the front axial atom in the left section of the circle.Step 5: Place the remaining axial atom in the right section of the circle. Step 6: Place the equatorial atom in the bottom section of the circle.Step 7: Rotate the back axial atom by 60 degrees so that it can point upwards.Step 8: Repeat the rotation for the equatorial atom. The final result is the Newman projection.The correct Newman projection can be seen by clicking on the "Tabs" tab. The Cl atom is in the back, while the Br atom is in the front, with the CH3 atom on the right side of the Newman projection.
Learn more about wedge-and-dash drawing into its Newman projection: brainly.com/question/31010195
#SPJ11
when excess mg(oh)2 is added to pure water, what is the equilibrium ph? ksp for mg(oh)2 is 7.1 x 10-12 ?
The equilibrium pH of the solution will be approximately 9.72 when excess Mg(OH)₂ is added to pure water.
When excess Mg(OH)₂ is added to pure water, it will dissociate slightly to form Mg²⁺ and OH⁻ ions according to the following equation:
Mg(OH)₂ ⇌ Mg²⁺ + 2OH⁻
The Ksp for Mg(OH)₂ is given as 7.1 x 10⁻¹², which is the equilibrium constant for the dissociation of Mg(OH)₂ into Mg²⁺ and OH⁻ ions. The expression for Ksp is:
Ksp = [Mg²⁺][OH⁻]²
Since Mg(OH)₂ dissociates into one Mg²⁺ ion and two OH⁻ ions, we can rewrite the equation as:
Ksp = [Mg²⁺][OH⁻]² = 7.1 x 10⁻¹²
Since we are adding excess Mg(OH)₂ to pure water, the initial concentration of Mg²⁺ and OH⁻ ions can be considered negligible. Let x be the concentration of OH⁻ ions that will be produced upon dissociation of Mg(OH)₂. Then, the equilibrium concentration of Mg²⁺ ions will be equal to x, and the equilibrium concentration of OH⁻ ions will be equal to 2x.
Substituting these values into Ksp expression, we have:
Ksp = [Mg²⁺][OH⁻]² = (x)(2x)² = 4x³ = 7.1 x 10⁻¹²
Solving for x, we get:
x = 5.3 x 10⁻⁵ M
Therefore, the equilibrium concentration of OH⁻ ions in the solution will be 5.3 x 10⁻⁵ M. To calculate the pH of solution, we can use the relationship:
pH = 14 - pOH
pOH = -log[OH⁻] = -log(5.3 x 10⁻⁵) = 4.28
pH = 14 - 4.28
= 9.72
To know more about equilibrium here
https://brainly.com/question/30525486
#SPJ4
(T/F) the allowable range for an objective function coefficient assumes that the original estimates for all the other coefficients are completely accurate so that this is the only one whose true value may differ from its original estimate.
It is true that the allowable range for an objective function coefficient considers the original estimates for all the other coefficients when estimating the range for this particular coefficient.
Generally the range is determined by the degree of uncertainty in the data used to estimate the coefficients, as well as the level of risk that the decision-maker is willing to accept. Therefore, sometimes the range for an objective function coefficient does not necessarily depend on the accuracy of the other coefficients. For example, if the objective function is to maximize profit, then the allowable range for any coefficient would be the range of values that would result in the highest possible profit, regardless of other coefficient estimates.
To learn more about uncertainty click here https://brainly.com/question/30325893
#SPJ1
which metal(s) can be oxidized with a sn2 solution but not with an fe2 solution? check all that apply.
The metals which can be oxidized with a Sn²⁺ solution but not with a Fe²⁺ solution are nickel, cadmium and copper.
The reactivity order of the metals is given below:
magnesium, aluminium, zinc, iron, nickel and tin
Generally, oxidation is defined as the loss of electrons and more reactive metals gives away electrons to less reactive metals.
So we are looking for a metal higher than tin but lower than iron.
The only metal in the rhyme is nickel. Definitely not aluminium because that is higher than iron.
Hence, the answer is Nickel and cadmium. Also copper (Cu) is one such metal, which has a reduction potential of -0.34 V. Hence, Cu can be oxidized by Sn2+ but not by Fe2+.
Learn more about oxidation from the link given below.
https://brainly.com/question/8959828
#SPJ4
what may operators be required to do when reacting to an overpressure condition oq qualifications
When there is an overpressure condition, operators may be required to take various steps, such as the following:
Shut off or isolate the source of the overpressureReduction of the pressure in the vessel or systemPressure relief valves need to be activated or adjusted to allow for the release of excess pressure.The following are some of the qualifications that are required for an operator:
They must be familiar with the specific operating system, equipment, or method that they will be operating.They should be able to identify the potential hazards associated with the equipment or system and be able to take action to mitigate those hazards.They should have adequate knowledge and training to be able to operate the equipment or system safely.They should have a basic understanding of pressure and the dangers that overpressure poses.Operators may also be required to follow established procedures for dealing with overpressure conditions in order to maintain safety and prevent equipment damage.
Learn more about Operators: https://brainly.com/question/20628271
#SPJ11
Why would the reaction of 2-chloro-2-methylpropane with silver nitrate in ethanol proceed at a faster rate than the reaction of 2-chlorobutane with silver nitrate in ethanol?
a) 2-chloroquine-2-methylpropane is more sterically hindered than 2- chlorobutane
b) 2-chloroquine-2-methylpropane forms a more stable carbonation than 2- chlorobutane
c) 2-chloroquine-2-methylpropane forms less stable carbonation than 2- chlorobutane
d) 2-chloroquine-2-methylpropane is less sterically hindered than 2- chlorobutane
The reaction of 2-chloro-2-methylpropane with silver nitrate in ethanol proceeds at a faster rate than the reaction of 2-chlorobutane with silver nitrate in ethanol because 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane. The correct answer is option b) 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane.
This is because 2-chloro-2-methylpropane forms a tertiary carbocation, which is more stable due to the inductive effect and hyper conjugation. On the other hand, 2-chlorobutane forms a secondary carbocation, which is less stable. The higher stability of the carbocation in the case of 2-chloro-2-methylpropane leads to a faster reaction rate with silver nitrate in ethanol.
You can learn more about silver nitrate at: brainly.com/question/8071605
#SPJ11
A solution of 100. 0 mL of 0. 200 M KOH is mixed with a solution of 200. 0 mL of 0. 150 M NiSO4. (a) Write the balanced chemical equation for the reaction that occurs. (b) What precipitate forms? (c) What is the limiting reactant? (d) How many grams of this precipitate form? (e) What is the concentration of each ion that remains in solution?
The correct answers are
a) The balanced chemical equation is KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)
b) Ni(OH)₂.
c) KOH is the limiting reactant
d)1.854 g Ni(OH)₂
e) Concentration of K⁺ and SO₄²⁻ ions in solution is: 0.05333M
(a) The balanced chemical equation for the reaction that occurs can be written as:
KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)
(b) The precipitate that forms is Ni(OH)₂.
(c) To determine the limiting reactant, we need to calculate the number of moles of KOH and NiSO₄.
Number of moles of KOH = 0.200 mol/L × 0.100 L = 0.0200 mol
Number of moles of NiSO₄ = 0.150 mol/L × 0.200 L = 0.0300 mol
Since KOH and NiSO₄ react in a 1:1 molar ratio, KOH is the limiting reactant because it produces fewer moles of product than NiSO₄.
(d) To calculate the mass of Ni(OH)₂ precipitate formed, we first need to determine the number of moles of Ni(OH)₂ formed:
0.0200 mol KOH × (1 mol Ni(OH)2 / 1 mol KOH) = 0.0200 mol Ni(OH)₂
Therefore, the mass of Ni(OH)₂ formed can be calculated as:
0.0200 mol Ni(OH)2 × 92.71 g/mol = 1.854 g Ni(OH)₂
(e) The balanced chemical equation shows that K₂SO₄ and Ni(OH)₂ are the products of the reaction. To determine the concentration of each ion that remains in solution, we need to calculate the number of moles of each product formed.
Number of moles of K₂SO₄ = 0.0200 mol KOH × (1 mol K₂SO₄ / 1 mol KOH) = 0.0200 mol
Number of moles of Ni(OH)₂ = 0.0200 mol KOH × (1 mol Ni(OH)₂ / 1 mol KOH) = 0.0200 mol
Therefore, the concentration of K⁺ and SO₄²⁻ ions in solution is:
[K⁺] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M
[SO₄²⁻ ] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M
The concentration of Ni²⁺ ions in solution can be calculated by subtracting the number of moles of Ni(OH)₂ from the initial number of moles of NiSO₄:
Number of moles of Ni²⁺ = 0.0300 mol - 0.0200 mol = 0.0100 mol
[Ni2+] = 0.0100 mol / (0.100 L + 0.200 L) = 0.0267 M.
To learn more about balanced chemical equation refer to:
brainly.com/question/28294176
#SPJ4
What type of energy is stored in the nucleus of a uranium atom?
consider this two-step mechanism for a reaction: what is the overall reaction? identify the intermediates in the mechanism. what is the predicted rate law?
The overall reaction is: NO₂(g) + Cl₂(g) → 2ClNO₂(g), The intermediates in the mechanism are ClNO₂(g) and Cl(g), and the predicted rate law for the overall reaction is k[NO₂]²[Cl₂].
The overall reaction will be: NO₂(g) + Cl₂(g) → 2ClNO₂(g)
The intermediates in the mechanism are ClNO₂(g) and Cl(g).
To determine the predicted rate law, we need to write the rate expressions for each step of the mechanism:
Step 1: Rate1 = k₁[NO₂][Cl₂]
Step 2: Rate2 = k₂[NO₂][Cl]
Since the second step is fast and involves an intermediate, we can assume that the concentration of the intermediate ClNO₂ is in steady-state, which means that its rate of formation will be equal to its rate of consumption. Therefore:
Rate1 = Rate2
k1[NO₂][Cl₂] = k₂[NO₂][ClNO₂]
Solving for [ClNO₂], we get:
[ClNO₂] = (k₁/k₂)[Cl₂]
Substituting this expression into the rate expression for the first step, we get:
Rate1 = k₁[NO₂][(k₁/k₂)[Cl₂]] = (k₁²/k₂)[NO₂][Cl₂]
Therefore, predicted rate law for the overall reaction will be:
Rate = k[NO₂]²[Cl₂]
where k = k₁²/k₂.
To know more about predicted rate law here
https://brainly.com/question/30719759
#SPJ4
--The given question is incomplete, the complete question is
"Consider this two-step mechanism for a reaction: NO₂(g) + Cl₂(g) ? ClNO₂(g) + Cl(g) Slow NO₂(g) + Cl(g) ? ClNO₂(g) Fast a. What is the overall reaction? b. Identify the intermediates in the mechanism. c. What is the predicted rate law?"--
How many chemical elements are there?
There are 118 elements on the periodic table.
LESSON 1
Content Practice B
1
Position and Motion
Directions Complete these purphs by writing the correct terms on the lines. Some terms might be used more
you must first choose ain)
To describe an object's (1. )
(2. )
as a starting place. From there, you must specify the
in
(3. )
to the object and the (4. )
which it lies from the starting place. If you are giving directions to two objects located
it can sometimes
in different directions from the same (5. )
direction
be helpful to describe one object as being in the (6. )
direction
from that place and the other in the (7. )
An object is in (8. )
any time its
is changing. In most cases, such a change involves changes in
(10. )
and (11. )
from the starting
point. However, if an object returns to its starting point, its
(12. )
is zero, even though it might have traveled
The passage describes how to describe an object's position and motion, including specifying its direction and distance from a starting point. It also notes that an object is in motion when its position is changing, and that an object's displacement can be zero even if it has traveled.
How to describe an object's location and motion is covered in the paragraph. It states that it is crucial to indicate an object's direction and distance from a starting point when expressing an object's location. To achieve this, one may define the direction of the item using words like north, south, east, and west, and its distance from the beginning point using words like metres or feet. The verse also indicates that when an object's location changes, it is in motion. Both the direction and the distance from the starting location may alter as a result. Even when an item has moved, its displacement might still be zero.
learn more about object's position here:
https://brainly.com/question/3676369
#SPJ4
What is the three carbon alcohol that forms the backbone of a triglyceride called?
The three carbon alcohol that forms the backbone of a triglyceride is called glycerol.
Glycerol is a type of alcohol that is found in many fats and oils. It is a clear, odorless, viscous liquid that is sweet-tasting and non-toxic. Glycerol is a versatile molecule that is used in a variety of industrial and pharmaceutical applications.
The structure of a triglyceride consists of three fatty acids that are linked to a glycerol molecule. The fatty acids are long-chain hydrocarbons that have a carboxylic acid group (-COOH) at one end. The carboxylic acid group can react with the hydroxyl group (-OH) on the glycerol molecule to form an ester linkage (-COO-). The resulting molecule is a triglyceride. Triglycerides are a type of lipid that are important for energy storage in the body. They are found in adipose tissue and are broken down into fatty acids and glycerol when the body needs to use stored energy.
Learn more about Glycerol here: https://brainly.com/question/23503113
#SPJ11
what is the correct structure of the cyclic hemiacetal that forms under acidic conditions when 5-hydroxy-4-methylpentanal cyclizes?
The correct structure of the cyclic hemiacetal that forms under acidic conditions when 5-hydroxy-4-methylpentanal cyclizes is attached below.
How do compounds form under acidic conditions?In this structure, the aldehyde group (CHO) and the hydroxyl group (OH) on the same molecule have reacted to form a cyclic hemiacetal. The carbon atom in the aldehyde group has formed a bond with the oxygen atom in the hydroxyl group, resulting in a five-membered ring structure.
The hemiacetal group (-CH(OH)-) is attached to the second carbon atom in the chain, which is also methyl-substituted (H3C-) and located next to the oxygen atom in the ring.
Learn more on acidic conditions here: https://brainly.com/question/13592513
#SPJ1
The formation of SO3 from SO2 and O2 is an intermediate step in the manufacture of sulfuric acid, and it is also responsible for the acid rain phenomenon. The equilibrium constant KP for the reaction 2SO2(g) + O2(g) ⇌ 2SO3(g) is 0. 13 at 803°C. In one experiment, 2. 00 mol SO2 and 2. 00 mol O2 were initially present in a flask. What must be the total pressure at equilibrium in order to have an 61. 0% yield of SO3?
For a yield of SO₃ of 61.0%, the overall pressure at equilibrium must be 332 atm.
The given equilibrium reaction is 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) with equilibrium constant KP = 0.13 at 803°C.
Initially, 2.00 mol SO₂ and 2.00 mol O₂ are present in a flask. Let 'x' be the number of moles of SO₃ formed at equilibrium. Therefore, the number of moles of SO₂ and O₂consumed in the reaction is also 'x'.
According to the balanced equation, 2 moles of SO₂react with 1 mole of O₂ to form 2 moles of SO₃. Thus, the number of moles of SO₃ formed is '2x'.
Using the equilibrium constant expression, we get:
KP = [SO₃]2 / [SO₂]2 [O₂]
Substituting the equilibrium concentrations in terms of 'x', we get:
0.13 = (2x / (2.00 - x))2 (2.00 - x - x)
Simplifying and solving for 'x', we get:
x = 0.958 mol
The number of moles of SO₃ formed at equilibrium is 2x = 1.92 mol.
To find the total pressure at equilibrium, we can use the ideal gas law:
PV = nRT
where P is the total pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming the volume and temperature remain constant, we can write:
P = ntotal RT / V
where ntotal is the total number of moles of gas present at equilibrium.
Initially, we have 2.00 mol SO₂ and 2.00 mol O₂, so the total number of moles of gas present initially is:
ntotal = 2.00 + 2.00 = 4.00 mol
At equilibrium, we have 0.958 mol SO₂, 0.958 mol O₂, and 1.92 mol SO₃. Therefore, the total number of moles of gas present at equilibrium is:
ntotal = 0.958 + 0.958 + 1.92 = 3.84 mol
Substituting the values in the equation for P, we get:
P = (3.84 mol) (0.0821 L atm mol-1 K-1) (1076 K) / (1.00 L) = 332 atm
Therefore, the total pressure at equilibrium must be 332 atm to have a 61.0% yield of SO₃.
To learn more about moles refer to:
brainly.com/question/26416088
#SPJ4
the radioactive substance iridium-192 has a half-life of 73.83 days. how many days would it take for a sample of iridium-192 to decay to 10% of its original amount? round your answer to the nearest integer.
It would take 221 days for a sample of iridium-192 to decay to 10% of its original amount.
The half-life of iridium-192 is 73.83 days.
Now, the formula for calculating the time is given by;
ln(Nt/N0)=-λt
Where Nt is the number of radioactive atoms remaining after time t, N0 is the initial number of radioactive atoms, t is the half-life and λ is the decay constant.
Taking 10% of the initial amount of the radioactive substance which is the final amount of the substance and solving for t gives
ln(0.1) = -λt
Now substituting the value of half-life which is 73.83 days into the equation gives;
ln(0.1) = -ln(2)/73.83(t)= -ln(0.1) / ln(2) * 73.83t = 220.64 days (rounded to the nearest integer).
Thus, it would take 221 days for a sample of iridium-192 to decay to 10% of its original amount.
Learn more about half-life at: brainly.com/question/31191744
#SPJ11
Identify the compound with atoms that have an incomplete octet.
A) BF3
B) ICl5
C) CO2
D) CO
E) Cl2
The compound with atoms that have an incomplete octet is BF3.The correct answer is a.
An octet is a set of eight electrons in the outermost shell of an atom. Noble gases have an octet of electrons in their outermost shells, making them stable. Other elements aim to reach this stable state by either losing or gaining electrons. When they do this, they form ions.
In some cases, however, elements may share electrons to achieve an octet. This is called covalent bonding. In a covalent bond, atoms share valence electrons to reach the stable octet configuration.BF3 is an example of a compound that has atoms with an incomplete octet.
In BF3, boron has only six electrons in its outermost shell. This means that it cannot form an octet on its own. However, by sharing three electrons with three fluorine atoms, boron is able to achieve a stable configuration, even if it does not have a complete octet.
In contrast, the other compounds listed in the question all have atoms that have a complete octet or an expanded octet. For example, CO and CO2 both have atoms with a complete octet. ICl5 and Cl2 both have atoms with an expanded octet. Only BF3 has atoms with an incomplete octet.
Learn more about covalent bonding here:
brainly.com/question/19382448
#SPJ11
does the rate constant for a reaction generally increase or decrease with an increase in reaction temperature? which factor is most sensitive to changes in temperature? complete the sentences to explain your answer.
The rate constant for a reaction generally increases with an increase in reaction temperature. The factor most sensitive to changes in temperature is the activation energy of the reaction.
The activation energy is the minimum energy required for a reaction to occur.
According to the Arrhenius equation, the rate constant (k) is directly proportional to the temperature (T) of the system. An increase in temperature would lead to an increase in the kinetic energy of the reactant molecules which will result in an increase in the number of effective collisions.
These effective collisions will have energy greater than the activation energy barrier, and thus they will lead to the formation of products. Hence, the rate of the reaction will increase with an increase in temperature.
Most of the reactions have a positive value of activation energy. Therefore, a slight increase in temperature can increase the rate of the reaction. However, if the temperature is increased beyond a certain limit, the rate of the reaction decreases due to the thermal denaturation of the enzyme or the inactivation of the catalysts, or the destruction of the reactants.
On increasing or decreasing the temperature the activation energy of a reaction changes drastically, either decreasing or increasing respectively.
In summary, the rate constant for a reaction is directly proportional to temperature and the activation energy is most sensitive toward temperature.
To know more about activation energy, refer here:
https://brainly.com/question/11334504#
#SPJ11
What is the hydroxide ion concentration and the pH for a hydrochloric acid solution that has a hydronium ion concentration of 1.50 × 10-3 M?
A) 6.67 × 10-12 M, 11.17
B) 6.67 × 10-11 M, 3.82
C) 6.67 × 10-12 M, 2.82
D) 6.67 × 10-11 M, 10.18
The hydroxide ion concentration and the pH for a hydrochloric acid solution that has a hydronium ion concentration of [tex]1.50* 10^{3}[/tex] M are (D) [tex]6.67* 10^{11}[/tex] M, or[tex]10^{18}[/tex]
What is the hydroxide ion?
The hydrogen ion, or hydrogen oxide, is a negatively charged molecule or ion consisting of oxygen and hydrogen atoms with the formula OH. The hydroxide ion is a basic anion with many useful applications in chemistry, such as acid-base reactions and synthesis reactions.
Arrhenius acid is a chemical that donates a proton, whereas Arrhenius base is a chemical that accepts a proton.
The compound created when an acid donates a proton to a base is referred to as a conjugate base, while the compound created when a base accepts a proton from an acid is referred to as a conjugate acid.
When the concentration of H3O+ is given in a solution, it is used to calculate the pH.
The pH scale is used to measure how acidic or basic a solution is. As a result, the pH of the hydrochloric acid solution is calculated as follows:
pH = -log [H3O+] pH = -log (1.50–10) pH = 2.82
We can use the ion-product constant for water to calculate the hydroxide ion concentration.
The equilibrium constant, also known as the ion product constant for water, is equal to the product of the hydronium ion and hydroxide ion concentrations.
[OH][H3O+] = 1.00 x 1014 mol/L2. [OH] = Kw/[H3O+] [OH] = 1.00 x [tex]10^{14}[/tex]mol/L2 / 1.50 10-3 [OH−] = 6.67* 10^{11}
Therefore, the hydroxide ion concentration and the pH for a hydrochloric acid solution that has a hydronium ion concentration of 1.50 [tex]10 ^{3}[/tex]M are6.67* 10^{11} M, or 10^{18}
To know more about the hydroxide ion https://brainly.com/question/25883474
#SPJ11
a student creates a solution with a molarity of 1.55 m. if the solute has a molar mass of 110 g/mol and the solution contains 188 g of solute, what is the volume of the solution?
the volume of the solution is: 1.1035 L or 1103.5 mL.
The given is as follows:
a student creates a solution with a molarity of 1.55 m.
If the solute has a molar mass of 110 g/mol and
the solution contains 188 g of solute,
what is the volume of the solution?
Let's calculate the volume of the solution. The volume of the solution can be calculated using the formula:
moles of solute = mass of solute ÷ molar mass
molarity = moles of solute ÷ volume of solution
We need to calculate the volume of the solution.
Thus, rearranging the above formula, we get:
Volume of solution = Moles of solute ÷ Molarity
Calculate the number of moles of solute
Number of moles of solute = Mass of solute ÷ Molar mass= 188 g ÷ 110 g/mol= 1.7091 mol
Now, we can calculate the volume of the solution.
Volume of solution = Number of moles of solute ÷ Molarity= 1.7091 mol ÷ 1.55 mol/L≈ 1.1035 L or 1103.5 mL
To know more about "Molarity" refer here:
https://brainly.com/question/13601876#
#SPJ11
calculate the ph during the titration of 22.84 ml of 0.26 m hno3(aq) with 0.10 m naoh after 11.72 ml of the base have been added.
how long would it take to plate 8.96 g of nickel onto copper using a 2.0 v power supply with a 315 ma current flow and 0.50 m nickel (ii) acetate solution? assume a current efficiency of 100% and that your plating solution contains the ni(ii) ion.
Using Faraday's law, we can calculate the amount of time it would take to plate 8.96 g of nickel onto copper using a 2.0 V power supply with a 315 mA current flow and a 0.50 M nickel (ii) acetate solution. Faraday's law states that the amount of charge required to plate one mole of metal is equal to the current multiplied by the time.
In this case, we can calculate the time by dividing the total charge (8.96 g/63.55 g/mol = 0.14 mol) by the current (315 mA = 0.315 A). This gives us a total time of 0.45 minutes, or 27 seconds. This assumes a 100% current efficiency, which is often not the case due to the presence of side reactions in the plating solution. Therefore, it is likely that the actual time to plate 8.96 g of nickel will be longer than 27 seconds.
In conclusion, it would take 27 seconds to plate 8.96 g of nickel onto copper using a 2.0 V power supply with a 315 mA current flow and a 0.50 M nickel (ii) acetate solution, assuming 100% current efficiency. However, due to side reactions in the plating solution, the actual time may be longer.
Know more about Faraday's law here
https://brainly.com/question/1640558#
#SPJ11
identify the lr when 5.87g mg(oh)2 react with 12.84g hcl to form mgcl2 and water. mg(oh)2 hcl ??? mgcl2 h2o
To identify the limiting reactant in this reaction, we need to compare the amount of product that can be produced from each reactant. The balanced chemical equation for the reaction is:
Mg(OH)₂+ 2HCl → MgCl₂ + 2H₂O
The molar mass of Mg(OH)₂ is 58.32 g/mol, and the molar mass of HCl is 36.46 g/mol. We can use these values to calculate the number of moles of each reactant:
5.87 g Mg(OH)₂ / 58.32 g/mol = 0.1005 mol Mg(OH)₂
12.84 g HCl / 36.46 g/mol = 0.352 mol HCl
According to the stoichiometry of the balanced equation, 1 mole of Mg(OH)₂ reacts with 2 moles of HCl to form 1 mole of MgCl₂. Therefore, the amount of MgCl₂ that can be produced from each reactant is:
From Mg(OH)2: 0.1005 mol Mg(OH)₂ × 1 mol MgCl₂ / 1 mol Mg(OH)₂ = 0.1005 mol MgCl₂
From HCl: 0.352 mol HCl × 1 mol MgCl₂ / 2 mol HCl = 0.176 mol MgCl₂
Since Mg(OH)₂ produces less MgCl₂ compared to HCl, it is the limiting reactant, and HCl is in excess. Therefore, Mg(OH)₂ is the limiting reactant in this reaction.
To learn more about MgCl₂ refer to:
brainly.com/question/28145230
#SPJ4
Calculate the molarity of the sodium bicarbonate solution. Also recall that 1 tsp = 4. 9mL qnd 1 cup = 236. 6 mL
The molarity of the sodium bicarbonate solution is 11.2 M.
We need to know the amount of sodium bicarbonate (NaHCO₃) dissolved in a given volume of solution to calculate its molarity. Let's assume that we have dissolved 1 tsp (teaspoon) of NaHCO₃ in a solution.
According to the problem, 1 tsp = 4.9 mL. We need to convert the volume into liters:
4.9 mL = 4.9/1000 L = 0.0049 L
Now we need to know the amount of NaHCO₃ in moles that is dissolved in this volume of solution. The molar mass of NaHCO₃ will be 84.01 g/mol. Let's assume that the NaHCO₃ is pure and completely dissolved in the solution.
We can use the following formula to calculate the molarity of the solution:
Molarity (M) = moles of solute/liters of solution
moles of NaHCO₃ = mass of NaHCO₃ / molar mass of NaHCO₃
Assuming 1 tsp of NaHCO₃ is equivalent to 4.6 g (which is the approximate weight of 1 tsp of NaHCO₃), we can calculate the moles of NaHCO₃:
moles of NaHCO₃ = 4.6 g / 84.01 g/mol = 0.0548 moles
Now we substitute the values into formula for molarity:
Molarity (M) = 0.0548 moles / 0.0049 L
= 11.2 M
To know more about molarity here
https://brainly.com/question/2817451
#SPJ4
when sugar is mixed with water what does it form?
The answer is Solution!
Explanation:
Solution is a homogeneous mixture
of two or more substance. In a
sugar solution, sugar gets uniformly
mixed with water