The position of this equilibrium will be well to the left because ethanolic acid is a weak acid: This gets a lot more ethanoate ions when sodium ethanoate is added to it.
What is the mechanism of the ethanoic acid and sodium ethanoate buffer?The position of this equilibrium will be well to the left because ethanolic acid is a weak acid: Much more ethanoate ions are added when sodium ethanoate is added. That will shift the equilibrium's position even more to the left, in accordance with Le Chatelier's Principle.
How do buffers keep the pH stable?Being a weaker acid or base, buffers act by neutralising any additional base (OH- ions) or acid (H+ ions) to preserve the moderate pH.
To know more about equilibrium visit:-
https://brainly.com/question/29359391
#SPJ1
The histograms show the number of cell phone sales during the store's operating hours for three days. Drag each statement to the box next to the histogram that it describes.
We can help explain how to analyze histograms and interpret the information related to cell phone sales.
To analyze histograms, follow these steps:
1. Identify the horizontal axis (x-axis), which should represent the store's operating hours.
2. Identify the vertical axis (y-axis), which should represent the number of cell phone sales.
3. Observe the height of the bars in the histogram. Each bar represents the number of cell phone sales within a specific time interval during the store's operating hours.
To match the statements to the histograms, you should consider the following:
- Look for any patterns or trends in the data, such as higher sales during certain time periods.
- Compare the histograms to determine if there are noticeable differences between the three days.
- Identify any outlier data points or unusually high or low sales during specific time intervals.
Once you have analyzed the histograms, you can match the statements to the appropriate histogram by considering the trends and patterns you've observed.
For more questions on: cell
https://brainly.com/question/23725619
#SPJ11
When metals react with other elements the atoms of the metals Electrons
Answer:
Metals tend to give away electrons during chemical reactions.
Explanation:
This is due to the number of valence electrons held by their atoms.
Answer:
When metals react with other elements, the atoms of the metals lose electrons. This is because metals tend to have low electronegativity, meaning they have a tendency to give up electrons in order to achieve a stable configuration. When they react with other elements, such as nonmetals, the metal atoms will transfer electrons to the nonmetal atoms, forming ionic bonds. The metal atoms become positively charged ions (called cations) because they lose electrons, while the nonmetal atoms become negatively charged ions (called anions) because they gain electrons. This transfer of electrons results in the formation of a compound composed of oppositely charged ions.
If you have 5.36 moles of C2H4O2, how many molecules of C2H4O2 would you have?
Answer: 3.23 x 10^23
Explanation: The number of molecules is found when the number of moles is multiplied by Avogadro's number, which is 6.022 x 10^23
5.36 moles x 6.022 x10^23 = 3.23 x 10^23
What is the molar mass of Magnesium?
Answer:
Explanation:
The molar mass of magnesium (Mg) is 24.31 grams per mole (g/mol).
What is the molar mass of Hydrochloric Acid?
Answer:
Explanation:
Hydrochloric acid (HCl) is a binary acid composed of hydrogen and chlorine. The molar mass of hydrochloric acid can be calculated by adding the atomic weights of hydrogen and chlorine.
The atomic weight of hydrogen is 1.008 g/mol, and the atomic weight of chlorine is 35.45 g/mol. Therefore, the molar mass of hydrochloric acid (HCl) is:
Molar mass of HCl = 1 x atomic weight of hydrogen + 1 x atomic weight of chlorine
bash
= 1 x 1.008 g/mol + 1 x 35.45 g/mol
= 36.46 g/mol
Therefore, the molar mass of hydrochloric acid (HCl) is 36.46 g/mol.
How does your model explain why the distribution of water storage traits changed over time?
It should be noted that to explain why the distribution of water storage traits changed over time, a model could employ various techniques from statistical analysis and machine learning.
How to explain the modelOne possible approach is as follows:
Data Collection: Gather data on water storage traits for a given population over a specific period. The data could include measurements of leaf water potential, stomatal conductance, osmotic adjustment, and other relevant traits.
Data Preprocessing: Clean the data, remove outliers, and normalize the data if necessary.
Exploratory Data Analysis: Conduct a visual and statistical analysis of the data to identify trends, patterns, and correlations. This could include scatterplots, histograms, boxplots, and correlation matrices.
Time-Series Analysis: Use time-series analysis techniques to investigate changes in the distribution of water storage traits over time. This could include fitting time-series models, decomposing the time series, and analyzing the autocorrelation and seasonality of the data.
Hypothesis Testing: Develop hypotheses about why the distribution of water storage traits changed over time, and test these hypotheses using statistical tests such as t-tests, ANOVA, and regression analysis.
Learn more about water on
https://brainly.com/question/1313076
#SPJ1
True or False: Only objects with energy can perform work.
Answer: True
Explanation: Physical Quantity which enables an object to do work is Energy. When an object does work, then its work done is only possible when the object has Kinetic Energy, Potential Energy or Both (Mechanical Energy) in it.
If a 750 mL sample of drinking water has mass of 750 g. If it has lead concentration of 28 ppm, how many grams of lead are in that sample of water? (Just type the number, and not the g units.)
The 750 mL sample of drinking water had 0.021 grams of lead in it.
How are concentrations in ppm calculated?Use the dilution equation C1V1 = C2V2, where C, concentration, can be expressed in molarity, ppm, ppb, etc. assemble the slope for the absorbance–ppm relationship.
We can first convert the lead concentration from ppm to mg/L because 1 ppm is equal to 1 mg/L: 28 ppm = 28 mg/L
Then, we may determine the mass of lead in the sample using the concentration and volume of the water sample:
Mass of lead = Concentration x Volume
Mass of lead = 28 mg/L x 0.75 L
Mass of lead = 21 mg
Finally, we can convert the mass from milligrams to grams:
Mass of lead = 21 mg = 0.021 g
To know more about concentration visit:-
https://brainly.com/question/29072206
#SPJ1
If someone could answer this rq I would appreciate it
A chemical reaction in which one element replaces another element in a chemical compound is called a "single displacement reaction" or "single replacement reaction".
What is the chemical reaction?A chemical reaction in which two or more substances combine to form a new, more complex substance is called a "combination reaction" or "synthesis reaction".
A chemical reaction in which a substance reacts with oxygen to produce thermal and light energy as well as carbon dioxide and water vapor is called a "combustion reaction".
A chemical reaction in which the positive ion on one compound replaces the positive ion of another compound is called a "double displacement reaction" or "double replacement reaction".
A chemical reaction in which one substance breaks down into two or more simpler substances is called a "decomposition reaction".
The Balanced Chemical Equations:
b. 2NaOH + MgSO4 → Na2SO4 + Mg(OH)2
c. 2 Fe2O3 + 6 H2O → 4 Fe(OH)3
d. 2 HgO → 2 Hg + O2
a. 3 Pb(NO3)2 + 2 AlCl3 → 3 PbCl2 + 2 Al(NO3)3
e. 2 C2H6 → 4 CO + 6 H2O
Read more about chemical reaction here:
https://brainly.com/question/11231920
#SPJ1
See transcribed text below
Fill Column A with the right term from Column B
Column A
a.
b
C.
d.
e.
Column B
A chemical reaction in which one element replaces another element in a chemical compound.
A chemical reaction in which two or more substances combine to form a new, more complex substance.
A chemical reaction in which a substance reacts with oxygen to produce thermal and light energy as well as carbon dioxide and water vapor.
A chemical reaction in which the positive ion on one compound replaces the positive ion of another compound.
A chemical reaction in which one substance breaks down into two or more simpler substances.
SECTION B: SKILLS
4. Examine each unbalanced chemical equation and classify it by writing the type of reaction it is on the left. Then, balanced each equation. Draw a chemical reaction beside the test title. (3 points each. 15 points total)
Type of Reaction
Unbalanced Chemical Equation - Balance It!
b.
C.
d.
out of
27
Al
+
Oz
2022 2Aho
2NaOH
+
MgSO4
Na2SO4
Y Mg(OH)2
2-Hgo → 2 Hg +
Liet 6H02 y Fe +
2 Fe2O3 + 12H2
O2
C2H6
+ / 02 2
2c02 +
H2O
Explain the observations and write a balanced net ionic equation for the reactions.
1. When 6 M NaOH is added drop-wise to a solution of ZnCl2, a white precipitate forms which dissolves to form a colorless solution as excess reagent is added.
2. When 6 M NH3 is added drop-wise to a solution of Zn(NO3)2,a white precipitate forms which dissolves to form a colorless solution as excess reagent is added.
3. When 6 M NaOH is added drop-wise to a solution of AlCl3,a white precipitate forms which dissolves to forms which dissolves when 6 M HCl is added.
1. When 6 M NaOH is added drop-wise to a solution of ZnCl2, a white precipitate forms which dissolves to form a colourless solution as excess reagent is added. The observation suggests the formation of a precipitate that is soluble in excess NaOH. This can be explained by the following balanced net ionic equation:
Zn2+ (aq) + 2OH- (aq) → Zn(OH)2 (s)
The white precipitate is zinc hydroxide, which dissolves in excess NaOH to form the soluble complex ion, [Zn(OH)4]2-.
2. When 6 M NH3 is added drop-wise to a solution of Zn(NO3)2, a white precipitate forms which dissolves to form a colourless solution as excess reagent is added. The observation suggests the formation of a precipitate that is soluble in excess NH3. This can be explained by the following balanced net ionic equation:
Zn2+ (aq) + 2NH3 (aq) + 2H2O (l) → Zn(OH)2 (s) + 2NH4+ (aq)
The white precipitate is again zinc hydroxide, which dissolves in excess NH3 to form the complex ion, [Zn(NH3)4]2+.
3. When 6 M NaOH is added drop-wise to a solution of AlCl3, a white precipitate forms which dissolves when 6 M HCl is added. The observation suggests the formation of a precipitate that is soluble in acid. This can be explained by the following balanced net ionic equation:
Al3+ (aq) + 3OH- (aq) → Al(OH)3 (s)
The white precipitate is aluminium hydroxide, which dissolves in acid to form the soluble ion, Al3+. This can be shown by the following balanced net ionic equation:
Al(OH)3 (s) + 3H+ (aq) → Al3+ (aq) + 3H2O (l)
Therefore, the white precipitate formed by adding NaOH to AlCl3 solution is Al(OH)3, which dissolves when HCl is added due to the formation of the soluble Al3+ ion.
To know more about net ionic equation, visit the link given below:
https://brainly.com/question/29299745
#SPJ4
Why wouldn't we want to do the burning magnesium reaction in a chemistry lab?
Look up the MSDS form for magnesium if need be.
Answer:
Burning magnesium reaction is a highly exothermic and reactive reaction that produces intense heat and bright light. As a result, it can be dangerous if proper safety precautions are not taken, such as wearing protective eyewear and clothing and working in a well-ventilated area. Additionally, the reaction produces magnesium oxide, which can be harmful if inhaled. Therefore, it is not typically performed in a standard chemistry lab, but rather in a specialized setting with trained professionals and proper safety equipment.
Explanation:
Which of the following electron models is the one currently accepted by modern science?
A.) Dalton's Billiard Ball.
B.) Thomson's Plum Pudding Model.
C.) Schrodinger's Quantum Mechanical Model.
D.) Rutherford-Bohr Planetary Model.
Schrodinger's Quantum Mechanical Model, which is currently recognised by modern science, is the electron model. The electron cloud model is another name for this one.
What electron model is in use right now?The term "electron cloud" refers to the current atomic structure model. A physicist from Austria named Edwin Schrodinger argued that electrons do not follow static or permanent trajectories.
What atom model is considered to be the most recent?The contemporary atomic model, often known as the cloud model, depicts atoms as having a nucleus made up of protons and neutrons and a diffuse gradient or cloud surrounding it that is made up of electrons. Because electron activity is probabilistic, electrons are often depicted as clouds.
To know more about electron visit:-
https://brainly.com/question/28977387
#SPJ1
g what are the product(s) of the hydrolysis of pentanamide with hcl? a) propanoic acid b) ammonia c) pentanoic acid d) ammonium chloride e) methyl ammonium chloride
The product of the hydrolysis of pentanamide with hcl are pentanoic acid and ammonium chloride, so correct answer would be Option C&D.
In chemistry and biology, hydrolysis refers to a double decomposition reaction in which water participates. Therefore, the hydrolysis reaction may be represented by the reversible chemical equation AB + HOH ⇌ AH + BOH, if a compound is represented by the formula AB in which A and B are atoms or groups and water is represented by the formula HOH. Other than water, the reactants in a hydrolysis reaction can be neutral molecules, as they are in the majority of cases when organic compounds are involved, or ionic molecules, as they are in the cases of salts, acids, and bases.
Visit here to learn more about the hydrolysis: https://brainly.com/question/10840252
#SPJ4
8Fe + Sg → 8FeS
How many grams of iron are needed to react with 30.0 g of sulfur?
82.3 g
52.3 g
55.8 g
93.6 g
the solution is 52.3 g (rounded to two decimal places).
If 95 grammes of iron are used in this reaction, how many grammes of sulphur are involved?We need to know the mass of the iron and sulphur in order to solve for the amount of sulphur involved. 95 grammes make up the iron's bulk. There are 16 grammes of sulphur in total. Hence, 32 grammes of sulphur are used in this reaction.
The correct answer is:
8Fe + S8 → 8FeS
The molar mass of sulfur is 256 g/mol (8 × 32 g/mol), and the molar mass of iron is 56 g/mol.
First, we need to convert the mass of sulfur to moles:
sulphur mass divided by its molar mass yields moles of sulphur.
moles of sulfur = 30.0 g / 256 g/mol
moles of sulfur = 0.1172 mol
According to the balanced equation, 1 mole of sulfur reacts with 8 moles of iron. Therefore, the moles of iron required can be calculated as:
moles of iron = 8 × moles of sulfur
moles of iron = 8 × 0.1172 mol
moles of iron = 0.9376 mol
Finally, we can calculate the mass of iron required using the moles of iron and the molar mass of iron:
Iron's mass is equal to its molar mass and its moles.
mass of iron = 0.9376 mol × 56 g/mol
mass of iron = 52.46 g
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
PRODUCT IDEA - create a digital poster, concept map, or other graphic organizer to show the cause and effect of at least TWO different factors that influence climate and weather.
which of the following solutions will have the smallest ph? group of answer choices a.0.1 m koh (aq) b.0.1 m ch3nh2 (aq)
c.0.1 m cf3cooh (aq)
d.0.1 m hclo3(aq)
Among the given options, the strongest acid is HClO3 so, it will have the smallest pH. therefore, option d is correct. The pH of a solution is related to the concentration of H+ ions in the solution, with lower pH values corresponding to higher H+ concentrations.
HClO3 is a strong acid that dissociates completely in water, producing H+ and ClO3- ions. Therefore, a 0.1 M HClO3 solution will have a pH of:
pH = -log[H+]
[H+] = 0.1 M (because HClO3 is a strong acid and dissociates completely)
pH = -log(0.1) = 1
On the other hand, the other options are:
a. 0.1 M KOH: This is a strong base that will produce OH- ions in water. However, the concentration of OH- ions is much lower than that of H+ ions produced by HClO3. Therefore, the pH of a 0.1 M KOH solution will be higher than 7, and therefore, it will not have the smallest pH among the given options.
b. 0.1 M CH3NH2: This is a weak base that will produce some OH- ions in water. However, the concentration of OH- ions produced will be much lower than that of H+ ions produced by HClO3. Therefore, the pH of a 0.1 M CH3NH2 solution will be greater than 7, and therefore, it will not have the smallest pH among the given options.
c. 0.1 M CF3COOH: This is a weak acid that will produce some H+ ions in water. However, the concentration of H+ ions produced will be much lower than that of H+ ions produced by HClO3. Therefore, the pH of a 0.1 M CF3COOH solution will be greater than 1, and therefore, it will not have the smallest pH among the given options.
To know more about HClO3, visit the link given below:
https://brainly.com/question/26556253
#SPJ4
calculate the number of zeptomoles (x 10-21 moles) of air trapped inside the container with the movable piston. use your first set of data (15 nm width) to do so
there are approximately 0.54 zeptomoles of air trapped inside the container with the movable piston.
To calculate the number of zeptomoles of air trapped inside the container with the movable piston, we first need to calculate the volume of the container.
Assuming the container is a rectangular prism with a length and height equal to the size of the graphene sheet (3 cm) and a width equal to the thickness of the spacer (15 nm), the volume of the container can be calculated as:
V = lwh = (3 cm)(3 cm)(15 nm) = 1.35 x 10^-5 cm^3
Next, we need to calculate the number of moles of air trapped inside the container. We can use the ideal gas law to do this:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
We know that the pressure inside the container is equal to atmospheric pressure, which is approximately 101325 Pa (or 1 atm). The temperature is not given, but we can assume it is room temperature, which is approximately 298 K. The ideal gas constant is 8.314 J/(mol*K).
Therefore, we can rearrange the ideal gas law to solve for n:
n = PV/RT
Substituting in the values we know:
n = (101325 Pa)(1.35 x 10^-5 cm^3)/(8.314 J/(mol*K) * 298 K)
n = 5.41 x 10^-28 mol
Finally, to convert this to zeptomoles, we multiply by 10^21:
n = 5.41 x 10^-7 zmol
Therefore, there are approximately 0.54 zeptomoles of air trapped inside the container with the movable piston.
To know more about zeptomoles, visit: brainly.com/question/13435684
#SPJ4
If a solution contains 3.458 moles of CuCl₂
in 1.500 L, what is the solution's molarity?
Answer:
Molarity is equal to total moles divided by total liters
Explanation:
Molarity =3.458
=2305M
1.500
Explanation:
I am wondering how to solve these
The balanced chemical equations are as follows:
Sb + 3O₂ → Sb₄O₆
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
Fe₂O₃ + 3CO → 3CO₂ + 2Fe
PCl₅ + 4H₂O → 5HCl + H₃PO₄
H₂S + 4Cl₂ → 8HCl + S₈
3Fe + 4H₂O → Fe₃O₄ + 4H₂
N₂ + 3H₂ → 2NH₃
What is a balanced chemical equation?A balanced chemical equation is a mathematical representation of a chemical reaction that uses chemical formulas for reactants and products. It shows the number of atoms of each element involved in the reaction and ensures that the law of conservation of mass is obeyed. In a balanced chemical equation, the number of atoms of each element on the left side (reactants) is equal to the number of atoms of the same element on the right side (products).
A chemical equation is balanced by adjusting the coefficients (numbers in front of the chemical formulas) of the reactants and products so that the number of atoms of each element is equal on both sides of the equation. The coefficients must be in the smallest possible whole-number ratios.
To know more about reactants, visit:
https://brainly.com/question/17096236
#SPJ1
1. Given that A is a solution of H₂SO4, B is a solution containing 0.050 mole of anhydrous Na₂CO3 per dm³.Pour solution A in the burette and titrate 20/25cm³ using methyl orange indicator, tabulate the burette readings and calculate the average volume of the acid used. From your result, calculate a.) the amount of Na2CO3 in 25.0cm³ of B used .b.) Concentration of A in mol/dm³c.) number of hydrogen ion in 1 dm³ of A.
1 mole of H₂SO₄ reacts with 1 mole of Na₂CO₃, the amount of H₂SO₄ used in the titration is also 0.00125 moles.
What is Mole?
In chemistry, a mole is a unit used to measure the amount of a substance. One mole of a substance contains Avogadro's number of particles, which is approximately 6.02 x [tex]10^{23}[/tex] particles. The mass of one mole of a substance is equal to its atomic or molecular weight in grams.
The balanced chemical equation for the reaction between H₂SO₄ and Na₂CO₃ is:
H₂SO₄ + Na₂CO₃ → Na₂SO₄ + H₂O + CO₂
a) The amount of H₂SO₄ used can be calculated from the burette readings. Assuming the average volume of the acid used is 23.5 cm³, and the concentration of the acid is unknown, we can calculate the number of moles of H₂SO₄ used in the titration as follows:
Moles of H₂SO₄ = Volume of H₂SO₄ (in dm³) x Concentration of H₂SO₄
We don't know the concentration of H₂SO₄, so we can't calculate the amount of H₂SO₄ directly from the titration. We need to use the stoichiometry of the balanced equation to relate the amount of H₂SO₄ to the amount of Na₂CO₃ in solution B.
From the balanced equation, we can see that 1 mole of H₂SO₄ reacts with 1 mole of Na₂CO₃. Therefore, the amount of Na₂CO₃ in solution B can be calculated as follows:
Amount of Na₂CO₃ = 0.050 mol/dm³ x 0.025 dm³ = 0.00125 moles
Since 1 mole of H₂SO₄ reacts with 1 mole of Na₂CO₃, the amount of H₂SO₄ used in the titration is also 0.00125 moles.
b) To calculate the concentration of H₂SO₄ in solution A, we can rearrange the equation above:
Concentration of H₂SO₄ = Moles of H₂SO₄ / Volume of H₂SO₄
Substituting the values we have:
Concentration of H₂SO₄ = 0.00125 moles / 0.0235 dm³ = 0.053 mol/dm³
c) From the balanced equation, we can see that 1 mole of H₂SO₄ produces 2 moles of H⁺ ions. Therefore, the number of hydrogen ions in 1 dm³ of solution A is:
Number of H⁺ ions = 2 x Concentration of H₂SO₄
Substituting the concentration of H₂SO₄ we calculated above:
Number of H⁺ ions = 2 x 0.053 mol/dm³ = 0.106 mol/dm³
Learn more about Mole from the given link
https://brainly.com/question/29367909
#SPJ1
A certain metal M forms a soluble sulfate salt M₂(SO4). Suppose the left half cell of a galvanic cell apparatus is filled with a 4.50 M solution of M₂(SO4)3 and the right half cell with a 2.25 mM solution of the same substance. Electrodes made of M are dipped into both solutions and a voltmeter is connected between them. The temperature of the apparatus is held constant at 35.0 °C. Which electrode will be positive? What voltage will the voltmeter show? Assume its positive lead is connected to the positive electrode. 0 Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits. left Oright X
The M electrode in the left half-cell will be oxidized since the left half-cell has a higher concentration and will act as the anode. As a result, the M electrode in the right half-cell will be lowered, and the right half-cell will act as the cathode. As a result, the right half-cell's M electrode will be positive.
StepsThe given half-cell reactions are:
Left half-cell: M₂(SO4)₃ + 6 e⁻ → 2M
Right half-cell: M₂(SO4)₃ + 6 e⁻ → 2M
Since both half-cell reactions are the same, the cell potential will be zero at equilibrium. Therefore, the voltmeter will show zero voltage.
However, if we assume that the reactions are not at equilibrium, we can use the Nernst equation to calculate the potential difference between the two electrodes:
Ecell = E°cell - (RT/nF)ln(Q)
where:
E°cell = standard cell potential
R = gas constant = 8.314 J/(mol K)
T = temperature in kelvin = 35.0 + 273 = 308 K
n = number of electrons transferred in the reaction = 6
F = Faraday's constant = 96,485 C/mol
Q = reaction quotient = [M]left / [M]right
The standard cell potential for the given reactions is not provided, but since both half-cell reactions are the same, the standard cell potential will be zero.
Plugging in the values, we get:
Ecell = - (RT/nF)ln(Q)
Ecell = - (8.314 J/(mol K) x 308 K / (6 x 96,485 C/mol)) ln(4.50 M / 2.25 mM)
Ecell = - (0.0257 V) ln(2000)
Ecell = 0.103 V
The M electrode in the left half-cell will be oxidized since the left half-cell has a higher concentration and will act as the anode. As a result, the M electrode in the right half-cell will be lowered, and the right half-cell will act as the cathode. As a result, the right half-cell's M electrode will be positive.
learn more about half-cell here
https://brainly.com/question/22946078
#SPJ1
What is the wavelength (in meters) of an electromagnetic wave whose frequency is 4.88 × 108 Hz?
Answer:
Explanation:
The wavelength (λ) of an electromagnetic wave can be calculated using the formula:
λ = c / f
where c is the speed of light (approximately 3.00 x 10^8 meters per second) and f is the frequency of the wave.
In this case, the frequency (f) is given as 4.88 x 10^8 Hz.
Substituting these values into the formula, we get:
λ = (3.00 x 10^8 m/s) / (4.88 x 10^8 Hz)
Simplifying this expression, we get:
λ = 0.6148 meters
Therefore, the wavelength of the electromagnetic wave with a frequency of 4.88 x 10^8 Hz is 0.6148 meters (or approximately 61.48 centimeters).
Ascorbic acid (C₆H₈O₆) is also known as Vitamin C. What quantity in molecules of C₆H₈O₆ does a Vitamin C drink with 1025 mg C₆H₈O₆ contain? Show Math.
Vitamin C drink with 1025 mg of ascorbic acid contains 3.50 × 10^21 molecules of C6H8O6.
What is Molecules?
A molecule is the smallest particle in a chemical element or compound that has the chemical properties of that element or compound. It is made up of two or more atoms that are chemically bonded together. The atoms can be of the same element, as in the case of diatomic molecules like O2 and H2, or they can be different elements, as in the case of water (H2O) or carbon dioxide (CO2).
First, let's calculate the molar mass of ascorbic acid (C6H8O6):
Molar mass of C = 12.01 g/mol
Molar mass of H = 1.008 g/mol
Molar mass of O = 16.00 g/mol
Molar mass of C6H8O6 = (6 × 12.01) + (8 × 1.008) + (6 × 16.00) = 176.12 g/mol
Now we can use the molar mass to convert the given mass of ascorbic acid into moles:
Number of moles = Mass / Molar mass
Mass of ascorbic acid = 1025 mg = 1.025 g
Number of moles of ascorbic acid = 1.025 g / 176.12 g/mol = 0.00582 moles
Finally, we can use Avogadro's number to convert from moles to molecules:
Number of molecules = Number of moles × Avogadro's number
Number of molecules of C6H8O6 = 0.00582 moles × 6.022 × 10^23 molecules/mol = 3.50 × 10^21 molecules
Learn more about Molecules from the given link
https://brainly.com/question/475709
#SPJ1
draw particle diagram fror aluminium and hydrochloric acid
Hydrogen gas and aluminum chloride (AlCl3) is produced when aluminum (Al) and hydrochloric acid (HCl) combine.
When aluminum reacts with hydrochloric acid, hydrogen gas, and aluminum chloride are produced. The reaction is represented by the following chemical equation:
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
Aluminum atoms could be represented as solid spheres in a particle diagram for this reaction, and hydrochloric acid molecules could be represented as two tiny spheres that symbolize hydrogen (H) and chlorine (Cl) atoms bound together.
The aluminum atoms would disintegrate when the acid was introduced to it, and the hydrogen and chlorine atoms would disintegrate as well.
The hydrogen atoms would then join forces to form hydrogen gas, and the chlorine atoms would join forces with the aluminum atoms to make aluminum chloride.
Aluminum chloride and hydrogen gas molecules would be visible in the ensuing particle diagram.
learn more about hydrochloric acid here
https://brainly.com/question/24586675
#SPJ1
16. Matching.
Answer the questions about this reaction:
Mg(s) + HCI- MgCl₂(aq) + H₂(g)
Write the oxidation and reduction half-reactions:
Oxidation half-reaction:
Reduction half-reaction:
Based on the table of relative strengths of oxidizing and reducing agents (B-18), would these reactants form these products?
Write the balanced equation:
The products would be formed by these reactants. Because Mg is a more powerful reducing agent than H₂, it can reduce H⁺ ions to form H₂ gas.
What is oxidized in Mg + 2HCl → MgCl2 + H2?Because it oxidizes magnesium to magnesium cations while being reduced, hydrochloric acid, the compound that delivers hydrogen ions to the reaction, acts as an oxidation agent.
What is the distinction between oxidation and reduction half-reactions?When a reactant loses electrons during the reaction, this is referred to as oxidation. When a reactant gains electrons during the reaction, this is referred to as reduction. This is common when metals react with acid.
What exactly is a half reaction?A half reaction is the component of a redox reaction that is either the oxidation or reduction reaction. By taking into account the change in oxidation states of the individual substances involved in the redox reaction, a half reaction is obtained.
Oxidation half-reaction: Mg(s) → Mg²⁺(aq) + 2e⁻
Reduction half-reaction: 2H⁺(aq) + 2e⁻ → H₂(g)
The balanced equation is:
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)
To know more about the reduction half-reactions visit:
https://brainly.com/question/23332593
#SPJ1
Determine the pressure of N2 under the following conditions.
49.1 g at 16.6°C in 5.80 L
The pressure of [tex]N_2[/tex] under the given conditions is 8.53 atm
We may use the Ideal Gas Law equation to calculate the pressure of [tex]N_2[/tex]under the following conditions:
PV = nRT
where P denotes pressure, V denotes volume, n is the number of moles of gas, R denotes the gas constant, and T denotes temperature in Kelvin.
To begin, we must convert the mass of [tex]N_2[/tex] to moles. We may use the molar mass of [tex]N_2[/tex] (28.02 g/mol):
49.1 g [tex]N_2[/tex] x (1 mol N2/28.02 g [tex]N_2[/tex] ) = 1.75 mol [tex]N_2[/tex]
The temperature must then be converted from Celsius to Kelvin:
16.6°C + 273.15 = 289.75 K
Plugging the data into the equation :
P = nRT/V
P = (1.75 mol)(0.0821 mol/molK)(289.75 K)/ (5.80 L)
P = 8.53 atm
Therefore, the pressure of [tex]N_2[/tex] is 8.53 atm
For more such questions on pressure, click on:
https://brainly.com/question/25736513
#SPJ11
What is the same on the left and right side of a balanced equation?
The total number of atoms for each element in a chemical equation that is balanced is the same on both sides of the equation.
What is the same on each side of an equation that is balanced?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.
Why is a chemical equation need to be balanced?For the chemical equation to adhere to the rule of conservation of mass, it must be balanced. A chemical equation is said to be balanced when the number of various elemental atoms on the reactants and products sides are equal.
To learn more about balanced equations visit:
brainly.com/question/2399130
#SPJ1
In the following sentence the verb is a
single word or verb phrase
We planted seeds in the garden.
Answer:
a single word
Explanation:
Phrase by definition is a group of of words that can stand together. "planted" is the verb used here. It is a single word.
Butanedione, a component of butter and body odor, has a cheesy smell. Elemental analysis of butanedione gave the mass percent composition:
C: 55.80%
H: 7.03%
O: 37.17%
The molar mass of butanedione is 86.09 g/mol
Determine the molecular formula of butanedione.
Answer:
The molecular formula of butanedione = C4 h6 O2
if a 250ml solution of 0.10M is made, calculate the mass of HCI contained in this solution
The 250 mL solution of 0.10 M HCl contains 0.9115 g of HCl in total.
What is hydrochloric acid 0.1 M?For acid-base reactions, raffination, and pH control, 0.1M hydrochloric acid is frequently employed. Every educational setting can employ this chemical.
Moles of solute (n) / volume of solution Equals molarity (M) (V)
If we rewrite this formula, we obtain:
moles of solute (n) = Molarity (M) x volume of solution (V)
Substituting the given values, we get:
moles of HCl = 0.10 M x 0.250 L = 0.025 moles
The molar mass of HCl, 36.46 g/mol, may be used to determine its mass. The formula is as follows:
mass of solute (m) = moles of solute (n) x molar mass (M)
When we change the values, we obtain:
mass of HCl = 0.025 mol x 36.46 g/mol
= 0.9115 g
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1