g for the redox reaction shown below, cu(s) 2ag (aq) cu2 (aq) 2ag(s) copper is undergoing oxidation group of answer choices true false

In 50 mL of 0.02 M KCl(aq) solution there is no change n pH. Option C is correct, In 50 mL of 0.02 M HCl(aq) solution Ph will increases. Option A is correct, and in 50 mL of 0.02 M KOH(aq) solution Ph will decreases. OPtion D is correct.

The pH of each solution will change differently upon addition of 50 mL of water, depending on the properties of the original solutions. Here are the changes will occur.

50 mL of 0.02 M KCl(aq); Adding water to a salt solution will not change the pH, since salts do not react with water to produce acidic or basic solutions. Therefore, the pH of the solution will remain the same.

50 mL of 0.02 M HCl(aq); Adding water to an acidic solution will dilute the acid and decrease the concentration of H+ ions, causing the pH to increase. Therefore, the pH will increase.

50 mL of 0.02 M KOH(aq); Adding water to a basic solution will dilute the base and decrease the concentration of OH- ions, causing the pH to decrease. Therefore, the pH will decrease.

Hence, C. A. D. is the correct option.

To know more about salt solution here

https://brainly.com/question/11134365

#SPJ4

Always discard solutions containing hexane in a designated organic waste container to ensure safety, environmental responsibility, and compliance with regulations.

When using a separatory funnel to separate an organic solvent like hexane from an aqueous solution, it's important to discard the hexane properly to ensure safety and environmental responsibility. You should discard solutions containing hexane in a designated organic waste container instead of the general waste container because:
1. Safety: Hexane is a volatile and flammable solvent. Disposing of it in a general waste container could create a fire hazard or cause harmful fumes to accumulate.
2. Environmental responsibility: Hexane is harmful to the environment if not disposed of correctly. Designated organic waste containers are meant for solvents like hexane, so they are properly treated and managed to minimize environmental impact.
3. Compliance with regulations: Laboratory regulations often require that different types of waste be disposed of separately to ensure proper handling and treatment. Discarding hexane in the appropriate organic the waste container ensures compliance with these regulations.

For more such questions on hexane

brainly.com/question/9630611

#SPJ11

The oxidation number of iron(Fe) decreases from +3 to 0. The oxidation number of C increases from +2 to +4. Hence Fe2O3 is reduced and CO is oxidized. Hence, it is a redox reaction.

One of the reactants in a redox reaction involving two reactants will be an oxidising agent, and the other reactant will be a reducing agent. By taking electrons, the oxidising agent reduces while aiding in the oxidation of other species. By contributing electrons and undergoing oxidation, the reducing agent aids in the reduction of other species.

The species that experience a rise in oxidation state is the reducing agent in a redox reaction, while the species that experience a reduction in oxidation state is the oxidising agent. In this reaction Carbon monoxide(CO) is the reducing agent and it has reduced ferric oxide Fe2O3 which acts as an oxidizing agent.

Learn more about Redox reaction, here:

https://brainly.com/question/21851295

#SPJ4

Electronic polarizability and scaled-charge are important parameters that can have a significant impact on the interfacial properties of RTILs, as well as their behavior in the presence of external electric fields.

Electronic polarizability is a measure of how easily the electron cloud in an atom or molecule can be distorted by an external electric field. In RTILs, electronic polarizability affects the strength of the electrostatic interactions between ions at the interface. This, in turn, affects the interfacial tension, which is a measure of the energy required to create new interfacial area between two immiscible phases.

Scaled-charge is a parameter that describes the effective charge of an ion in a RTIL. It takes into account the polarization of the ion's electron cloud in the presence of other ions in the RTIL. Scaled-charge affects the distribution of ions at the interface, as well as the surface charge density. This, in turn, affects the interfacial tension and the capacitance of the interface.

To know more about polarizability here

https://brainly.com/question/29765380

#SPJ4

The melting point is the temperature at which solid changes into a liquid. It is a characteristic property of a substance and can be used to identify or characterize it.

The melting point depends on the strength of the intermolecular forces between the molecules of the substance. Stronger intermolecular forces result in higher melting points.

To measure the melting point of a substance, you need to heat it gradually and monitor its temperature and physical state. You can use a device called a melting point apparatus, which consists of a heating block, a thermometer, and a capillary tube. You place a small amount of the substance in the capillary tube and insert it into the heating block. You then adjust the heating rate and observe when the substance starts to melt and when it completely melts. The temperature range over which melting occurs is called the melting point range.

The melting point range can vary depending on several factors, such as the purity of the substance, the heating rate, and the accuracy of the thermometer. A pure substance usually has a sharp melting point, meaning that it melts within a narrow temperature range (usually less than 1°C). An impure substance usually has a broad melting point, meaning that it melts over a wide temperature range (usually more than 1°C). A faster heating rate can cause the temperature to rise faster than the substance can melt, resulting in a higher apparent melting point. A slower heating rate can allow the substance to melt more evenly, resulting in a lower apparent melting point. A faulty or imprecise thermometer can also affect the accuracy of the melting point measurement.

Therefore, to determine the exact range of temperatures over which melting occurs for a given substance, you need to use a pure sample, a reliable thermometer, and an optimal heating rate. You also need to repeat the measurement several times and take an average of your results. You may also compare your results with literature values or known standards to verify your accuracy.

to know more about melting points click here:

https://brainly.com/question/40140

#SPJ4

Dalton's law of partial pressure means that the total pressure of a gas mixture is equal to the sum of the individual partial pressures of each gas.

Partial pressure is defined as the pressure at which all gases would escape if the gases were in the volume of the mixture at the same temperature. The total pressure of the oil mixture is equal to a fraction of the different oil. The total pressure P (total) is the sum of all the stresses present in the reference material. Dalton's law of partial pressure states that the total pressure of a gas mixture is equal to the partial pressure of the component gas. Mathematically expression : [tex]P = \sum P_i = P_1 + P_2 + .... [/tex]

where, P --> total pressure

Pi --> partial pressures of each gas

The desired answer is therefore Dalton's partial pressure law.

For more information about Dalton's law of partial pressures, visit :

https://brainly.com/question/13082853

#SPJ4

The solubility of copper(II) oxalate at 25°C is approximately 5.39 x 10^-5 moles/liter.

To determine the solubility of copper(II) oxalate (CuC2O4) in moles/liter, we can use the Ksp value.

The balanced dissociation equation for CuC2O4 is:

[tex]CuC2O4 (s) ⇌ Cu²⁺ (aq) + C2O4²⁻ (aq)[/tex]

Let 's' represent the solubility of CuC2O4 in moles/liter. At equilibrium, the concentrations of Cu²⁺ and C2O4²⁻ ions are both 's' moles/liter.

The Ksp expression for CuC2O4 is:

[tex]Ksp = [Cu²⁺] * [C2O4²⁻][/tex]

Given that Ksp is[tex]2.9 x 10^-8:[/tex]

[tex]2.9 x 10^-8 = (s) * (s)[/tex]

To find 's', we can solve the equation:

[tex]s² = 2.9 x 10^-8[/tex]
[tex]s = √(2.9 x 10^-8)[/tex]
[tex]s ≈ 5.39 x 10^-5 moles/liter[/tex]

to know more about solubility refer here:

https://brainly.com/question/28170449#

#SPJ11

The "rainforests of the sea," or coral reefs, are under serious threat from human activity and climate change. Overfishing, pollution, acidification of the water, and rising sea temperatures are all factors in the decline of coral reefs.

Coral reefs are important for the health of our oceans because they provide vital habitats for numerous fish species and other marine life. By absorbing wave energy, they also offer coastal security, reducing erosion and storm damage.

In addition to endangering the survival of numerous marine species, the destruction of coral reefs has serious economic repercussions for the local populations that depend on them for tourism and fishing.

Coral reef degradation is also a result of overfishing and pollution, such as nutrient runoff from farmland and sewage. Coral reef destruction threatens not only the biodiversity of our oceans but also the economies of the local communities that depend on them for tourists and fishing.

As a result, we must take action to lower our carbon emissions, enhance marine conservation efforts, and deal with the underlying reasons for the decline of coral reefs.

learn more about coral reefs here

https://brainly.com/question/10970167

#SPJ1

A binary compound in which the bonding is ionic is most likely to be scientifically valid when there  the electronegativity difference between the elements in the compound is relatively large.

A binary compound is a type of chemical compound which consists of two distinct elements. An ionic binary compound is formed when there is  a relatively difference in electronegativities of the two elements, so that they have the tendency to form respective cations and anions. More specifically binary compounds refer to expanded solids. examples of ionic binary compounds: KBr, NaCl, NaBr.

There are three types of Binary Compounds. They are: Binary acid compounds, Binary ionic compounds, Binary covalent/molecular compounds.

Thus, for a binary compound to form ionic bond, there must be an electronegativity difference between the elements.

To know more about binary compounds here

https://brainly.com/question/15162286

#SPJ4

6.88 moles of helium and 3.12 moles of hydrogen are present in every 10 moles of gas in the combination.

The total pressure of the gas mixture can be found by adding the partial pressures of each gas:

Total pressure = partial pressure of helium + partial pressure of hydrogen

Total pressure = 428 mmHg + 193 mmHg

Total pressure = 621 mmHg

To find the mole fraction of each gas, we need to use the following formula:

Mole fraction = moles of gas / total moles of gas

We can find the moles of each gas using the ideal gas law:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.

We can assume that the volume, temperature, and gas constant are constant, so we can simplify the equation to:

n = PV / RT

For helium:

n(He) = (428 mmHg)(V) / (R)(T)

For hydrogen:

n(H₂) = (193 mmHg)(V) / (R)(T)

The total number of moles of gas in the mixture is the sum of the moles of helium and hydrogen:

n(total) = n(He) + n(H₂)

To find the mole fraction of each gas, we can substitute the expressions for n(He), n(H₂), and n(total) into the formula:

Mole fraction of helium = n(He) / n(total)

Mole fraction of hydrogen = n(H₂) / n(total)

After simplifying and substituting the expressions, we get:

Mole fraction of helium = 0.688

Mole fraction of hydrogen = 0.312

Therefore, the mole fraction of helium in the mixture is 0.688 and the mole fraction of hydrogen is 0.312. This indicates that for every 10 moles of gas in the combination, 6.88 moles are helium and 3.12 moles are hydrogen.

To know more about the Mole fraction, here

https://brainly.com/question/29808190

#SPJ4

No, aqueous ethylene glycol and methanol don't have the same conductivity level.

When methanol (CH3OH) is dissolved in water, the term "aqueous methanol" is used (H2O). Due to the polarity of the molecules, methanol and water combine to form a homogeneous solution.

The concentration and mobility of the ions present in a solution determine its electrical conductivity. Although methanol (CH3OH) is a polar molecule, when it dissolves in water, it does not separate into ions. As a result of the lack of charged particles that can conduct an electric current, aqueous methanol has a low electrical conductivity.

The bigger molecule ethylene glycol (C2H6O2), in contrast, does dissociate into ions when it is dissolved in water, resulting in two charged particles for each molecule. As a result, aqueous ethylene glycol conducts electricity better than aqueous methanol.

As a result of the different numbers of ions created when methanol and ethylene glycol are dissolved in water, their conductivity values are different.

To know more about aqueous methanol, visit

brainly.com/question/30137922

#SPJ1

To solve this problem, we can use the balanced equation and the concept of moles and molarity.

First, we need to find the moles of SbCl3. We can use the formula: moles = molarity * volume (in liters) moles of SbCl3 = 0.825 M * 0.2 L = 0.165 moles Next, let's write down the balanced equation: SbCl3 + 3HCl → SbCl5 + 3H2

According to the balanced equation, 1 mole of SbCl3 reacts with 3 moles of HCl. So, moles of HCl required = 0.165 moles of SbCl3 * 3 = 0.495 moles Now, we need to find the volume of 4.00 M HCl required.

Using the formula for moles: moles = molarity * volume (in liters) We can rearrange the formula to solve for the volume: volume (in liters) = moles / molarity volume of HCl (in liters) = 0.495 moles / 4.00 M = 0.12375 L Now, convert the volume to milliliters: volume of HCl (in mL) = 0.12375 L * 1000 mL/L = 123.75 mL So, 123.75 mL of 4.00 M HCl were added.

Therefore the answer is  123.75 mL of 4.00 M HCl were added.

For more questions on: moles

https://brainly.com/question/28037816

#SPJ11  

The pair of compounds that exhibit predominantly ionic bonding are NaF and MgO.

NaF is composed of a metal (Na) and a non-metal (F), and MgO is composed of a metal (Mg) and a non-metal (O). In both compounds, the metal atom loses electrons to form a cation, and the non-metal atom gains electrons to form an anion. The resulting ions attract each other electrostatically to form the ionic bond.

In the other pairs of compounds listed, the bonds are not purely ionic. SO2 and HCl have covalent bonds, RbF and NO2 have polar covalent bonds, KNO3 has both ionic and covalent bonds, and KCl and CO2 have polar covalent bonds.

learn more about ionic bonding here : brainly.com/question/957239

#SPJ4

The balanced chemical equation for the reaction between carbon and water to form methane is:

C + 2H2O → CH4 + CO2

From the equation, we see that one mole of carbon reacts with two moles of water to produce one mole of methane.

To determine the theoretical yield of methane, we first need to convert the mass of carbon to moles:

1250 g C × (1 mol C/12.011 g C) = 104.11 mol C

Since one mole of carbon produces one mole of methane, the theoretical yield of methane is also 104.11 mol.

Next, we can use the molar mass of methane to convert the theoretical yield from moles to grams:

104.11 mol CH4 × (16.043 g CH4/mol) = 1669.9 g CH4

Therefore, the theoretical yield of methane is 1669.9 g.

The percent yield of the reaction is the actual yield (the amount of methane recovered) divided by the theoretical yield, multiplied by 100%.

percent yield = (actual yield / theoretical yield) × 100%

To find the actual yield, we use the given mass of methane recovered:

actual yield = 710 g CH4

So, the percent yield is:

percent yield = (710 g CH4 / 1669.9 g CH4) × 100%

percent yield = 42.5%

Therefore, the percent yield of the reaction is 42.5%.

learn more about electrolysis here:brainly.com/question/16763470

#SPJ4

The value of K for the reverse reaction at the given temperature is 9.35.

The given reaction is:

SiH4(g) + 2Cl2(g) ⇌ SiCl4(g) + 2H2(g)

The equilibrium concentrations are given as follows:

[SiH4] = 0.018 M

[Cl2] = 0.0043 M

[SiCl4] = 2.2×[tex]10^{-4}[/tex]M

[H2] = 3.9×[tex]10^{-4}[/tex]M

The expression for the equilibrium constant (K) for the given reaction is:

K = ([SiCl4] x [H2]) / ([SiH4] x [Cl2])

Substituting the given values in the above equation, we get:

K = (2.2×[tex]10^{-4}[/tex]Mx (3.9×[tex]10^{-4}[/tex]M)^2) / (0.018 x (0.0043))

K = 0.107

Therefore, the value of K for this reaction at the given temperature is 0.107.

For the reverse reaction, we need to take the reciprocal of K to obtain the equilibrium constant for the reverse reaction. The reverse reaction can be obtained by reversing the direction of the given reaction, which gives:

SiCl4(g) + 2H2(g) ⇌ SiH4(g) + 2Cl2(g)

The equilibrium constant for the reverse reaction is given by:

K' = 1/K

Substituting the value of K in the above equation, we get:

K' = 1/0.107

K' = 9.35

Learn more about  equilibrium constant  here:

https://brainly.com/question/31321186

#SPJ1

a. The two functional groups in an amino acid are the amino group (-NH2) and the carboxylic acid group (-COOH). When two amino acids join together via a peptide bond, the resulting dipeptide has two functional groups, one amino group and one carboxylic acid group, that can be ionized depending on the pH of the solution.

The pH at which a dipeptide predominantly exists as a neutrally charged molecule is the average of the two pKa values of its constituent amino acids. In this case, one amino acid has a pKa of 2.34 for the carboxylic acid group and a pKa of 9.60 for the amino group, while the other amino acid has a pKa of 2.20 for the carboxylic acid group and a pKa of 9.13 for the amino group.

To determine the pH range over which the dipeptide predominantly exists as a neutrally charged molecule, we need to find the average of the two pKa values for each functional group.

For the carboxylic acid group:

(pKa1 + pKa2) / 2 = (2.34 + 2.20) / 2 = 2.27

For the amino group:

(pKa1 + pKa2) / 2 = (9.60 + 9.13) / 2 = 9.37

Therefore, the pH range over which the dipeptide predominantly exists as a neutrally charged molecule is around pH 2.27 to pH 9.37.

b. The isoelectric point (pI) of a peptide is the pH at which it has a net charge of zero. To calculate the pI of this dipeptide, we need to find the pH at which the positive and negative charges on the dipeptide are equal.

At a pH below the pKa of the carboxylic acid group, the carboxylic acid group is protonated and carries a positive charge, while the amino group is protonated and carries a positive charge. At a pH above the pKa of the amino group, the amino group is deprotonated and carries a negative charge, while the carboxylic acid group is deprotonated and carries a negative charge.

Therefore, the pI can be calculated by averaging the two pKa values of the amino acids, as well as their corresponding charges.

pI = (pKa1 + pKa2) / 2 = (2.34 + 2.20 + 9.60 + 9.13) / 4 = 5.32

The isoelectric point of this dipeptide is 5.32.

To know more about dipeptide reactions, visit the link given below:

https://brainly.com/question/6194023

#SPJ4

The correct answer is To determine how many grams of hydrobromic acid (HBr) are produced when excess nitric acid[tex](HNO3)[/tex]reacts with 25.4 g of lithium bromide[tex](LiBr)[/tex], we need to use stoichiometry and the balanced chemical equation provided.

The balanced chemical equation is [tex]HNO3(aq) + LiBr(aq) → LiNO3(aq) + HBr(aq)[/tex]From the equation, we can see that one mole of HNO3 reacts with one mole of LiBr to produce one mole of HBr. Therefore, we need to first determine the number of moles of LiBr used in the reaction. To do this, we can use the molar mass of LiBr to convert the given mass of 25.4 g to moles: [tex]25.4 g LiBr x (1 mole LiBr / 86.85 g LiBr) = 0.292 moles LiBr[/tex]Since the reaction uses 1 mole of LiBr, we know that 0.292 moles of HBr will be produced. To determine the mass of HBr produced, we can use the molar mass of HBr: [tex]0.292 moles HBr x (80.91 g HBr / 1 mole HBr) = 23.6 g HBr[/tex] Therefore, when excess nitric acid reacts with 25.4 g of lithium bromide, 23.6 g of hydrobromic acid are produced. It's important to note that the word "excess" indicates that there is more than enough nitric acid to react with all of the lithium bromide, which means that the reaction will go to completion and all of the LiBr will be consumed. If the nitric acid were limiting, then we would need to calculate the amount of HBr produced based on the limiting reactant.

To learn more about stoichiometry click on the link below:

brainly.com/question/30215297

#SPJ1

Answer:

540

The artifact is approximately 17,190 years old. The half-life of carbon-14 is approximately 5730 years. This means that the amount of carbon-14 in a sample will decrease by half every 5730 years.

If the amount of radioactive carbon-14 in a wooden artifact is one-eighth of a new piece of the same wood, then the fraction of carbon-14 remaining after some number of half-lives (n) can be calculated as:

(1/2)^n = 1/8

Simplifying this equation:

2^n = 8

2^n = 2^3

n = 3

This means that the wooden artifact has gone through 3 half-lives of carbon-14. The age of the artifact can be calculated by multiplying the half-life by the number of half-lives:

Age = Half-life × Number of half-lives

Age = 5730 years × 3

Age = 17,190 years

Find out more about the radioactive carbon 14

brainly.com/question/14812944

#SPJ4

A radical cation is created in the ionization chamber when a high energy electron impacts molecule M.

In an ionization chamber, a high energy electron can form a variety of species, such as electrons, ions, and neutral species, when it collides with the molecule "m." Ion pairs, which are composed of a negatively charged electron and a positively charged ion (cation), are the most prevalent species (anion).

This is due to the tremendous energy of the hitting electron, which can knock an electron out of the molecule and leave a positively charged ion (cation) in its place. In order to determine the energy and intensity of the electron beam in the ionization chamber, the generated ion pair is then detected.

Instruments that measure and detect ionizing radiation are called ionization chambers. Ionizing radiation is used to produce charged particles, usually ion pairs, inside the chamber.

To know about ionization

https://brainly.com/question/1602374

#SPJ4

The complete question is

When high energy electron impacts molecule M in the ionization chamber, what type of species initially produced?

The buffer region of a titration curve corresponds to the portion where there is a relatively flat or gradual slope in the curve. This occurs when there is a significant amount of both the weak acid and its conjugate base present in the solution.

Titration is a common technique used in chemistry to determine the concentration of a solution, or to find the amount of a substance in a solution. It involves adding a solution of known concentration (the titrant) to a solution of unknown concentration (the analyte) until the reaction between the two is complete. The factor at which the response is entire is referred to as the endpoint, and it is usually detected by way of using a trademark that changes shade when the response is finished.

Titration is an effective device for figuring out the concentration of a wide variety of substances, including acids, bases, and various other chemical substances. It is widely used in many areas of chemistry, including analytical, environmental, and industrial chemistry. Titration can be used to determine the concentration of a particular substance in a solution, or to determine the purity of a sample. It is an essential technique for many industries, including pharmaceuticals, food and beverage production, and water treatment.

To learn more about Titration visit here:

brainly.com/question/2728613

#SPJ4

The buffer component ratio, (CH3COO-)/(CH3COOH), of an acetate buffer with a pH of 4.47 and a Ka of CH3COOH of 1.8 x 10^- is: 0.54

The buffer component ratio, (CH3COO-)/(CH3COOH), of an acetate buffer with a pH of 4.47 and a Ka of CH3COOH of 1.8 x 10^-5 can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([CH3COO-]/[CH3COOH])

So, the buffer component ratio (CH3COO-)/(CH3COOH) of the acetate buffer is approximately 0.54.

To know more about "Henderson-Hasselbalch equation" refer here:

https://brainly.com/question/13423434#

#SPJ11

The pH of the solution at the equivalence point is 4.19.

To calculate the pH at the equivalence point of the titration, we need to use the Henderson-Hasselbalch equation:

[tex]pH=pKa+log(\frac{A^{-} }{HA} )[/tex]

At the equivalence point, the moles of C6H5COOH and NaOH will be equal, so the concentration of C6H5COOH will be halved, and the concentration of its conjugate base, C6H5COO-, will be equal to the concentration of NaOH added. Therefore, we can substitute [A-] with the concentration of NaOH.

0.10 M NaOH will be added to 0.05 M of C₆H₅COOH to reach the equivalence point. We can then use the Ka value to calculate the pKa:

pKa = -㏒(Ka) = -㏒(6.5 x 10⁻⁵)

                     = 4.19

Substituting the values into the Henderson-Hasselbalch equation:

pH = 4.19 + ㏒([NaOH]/[C₆H₅COOH])

At the equivalence point,

[NaOH] = 0.05 M and [C₆H₅COOH] = 0.05 M.

Substituting these values:

pH = 4.19 + log(1)

     = 4.19

As a result, the solution's pH at the equivalence point is 4.19.

To know more about the Equivalence point, here

https://brainly.com/question/11004927

#SPJ4

Answer:

a

Explanation:

What is the volume, measured in liters at STP, of 285 grams of the gas acetylene, C3H8? which equals 67-4o92- witch then gives u a

The number of formula units in a 1.86 mol sample of FeCl3 is 1.12 × 10²⁴.

Formula units are defined as the smallest repeating unit in an ionic compound.

They can be atoms, ions, or molecules depending on the type of compound. In order to find the number of formula units in a given amount of a substance, we need to use Avogadro's number, which is the number of particles in one mole of a substance (6.022 × 10²³ particles/mole).

To find the number of formula units in a 1.86 mol sample of FeCl3, we need to first determine the formula unit for FeCl3. The formula for FeCl3 is FeCl3, which means there is one iron atom and three chlorine atoms in each formula unit.

Next, we need to use Avogadro's number to convert from moles to formula units.

We can do this by multiplying the number of moles by Avogadro's number. 1.86 mol × 6.022 × 10²³ formula units/mole = 1.12 × 10²⁴ formula units.

Therefore, there are 1.12 × 10²⁴ formula units in a 1.86 mol sample of FeCl3.

To know more about FeCl3 refer to-

brainly.com/question/8203381#

#SPJ11

The conjugate acid of ammonia under the basic conditions is given as NH⁴⁺ (Ammonium).

Acid-base pairs that differ by one proton are called conjugated pairs. A conjugate acid-base pair is a pair of substances that can both absorb hydrogen ions and donate hydrogen ions to each other. A proton is added to a compound to create a conjugate acid, and a proton is removed to create a conjugate base. The conjugate acid of ammonia

NH3 is NH₃ + H⁺ → NH₄⁺, where NH3 is the conjugate base and NH4+ is the conjugate acid. NH3 is generally considered a basic chemical, but it can act as an acid under extremely alkaline conditions.

To know more about conjugate acid, visit,

https://brainly.com/question/12584785

#SPJ4

The pH of a solution which is 0.1426 M in NH3 and 0.1291 M in NH4Br (common ion effect) is 9.42.

The pH of a solution with a given molarity can be determined by using the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to its components' pKa and concentrations. The pH of a 0.1426 M solution of NH3 (weak base) and 0.1291 M NH4Br (salt of a weak base and a strong acid) can be calculated using this equation:

NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)NH4Br → NH4+ + Br-pH = pKa + log [base]/[acid]where pKa is the negative logarithm of the acid dissociation constant of NH4OH (or ammonium hydroxide), which is equal to 9.25. Because the equation refers to NH3, we need to find Kb (base dissociation constant) from the given pKa value.Kb = Kw/Ka= 1.0×10^-14/1.8×10^-5= 5.56×10^-10

At equilibrium, [NH3] = [NH4+] and [OH-] = xSo, Kb = [NH4+][OH-]/[NH3]Therefore, 5.56×10^-10= x^2/(0.1426-x)Because the concentration of NH4+ ions in NH4Br is negligible compared to the concentration of NH3, we can assume that x = [OH-]. Thus, 5.56×10^-10= x^2/0.1426, which yields [OH-] = 1.89×10^-6 M. As a result, pH = 14 - pOH = 14 + log [H+]= 14 + log (1.0×10^-14/1.89×10^-6)≈ 9.42Therefore, the pH of the solution is 9.42.

To know more about pH refer to-

brainly.com/question/15289714#

#SPJ11

The state of matter that has the weakest intermolecular forces is the gas state. Option A is correct.

In the gas state, the molecules are relatively far apart from each other and are in constant motion. The intermolecular forces between gas molecules are weak because the molecules have a large separation distance, resulting in a low density and high compressibility. The kinetic energy of gas molecules is much greater than the strength of their intermolecular forces, and they tend to move independently of each other.

In contrast, in the liquid and solid states, the intermolecular forces are stronger due to the closer proximity of the molecules. In liquids, the molecules are in close contact with each other, allowing for the formation of temporary dipole-dipole forces and hydrogen bonding. In solids, the molecules are held together by even stronger forces, such as ionic, covalent, or metallic bonds. Option A is correct.

Which state of matter has the weakest intermolecular forces?

Select the correct answer below:

A. Gas

B. Liquid

C. Solid

D. All states of matter have the same strength of intermolecular forces.

To know more about the Forces, here

https://brainly.com/question/30644583

#SPJ4

In the uterus, the fertilised egg or zygote passes through a number of cellular processes. Cell division, in which the zygote divides multiple times to create a mass of cells known as a blastocyst, is one of the most crucial processes.

Identity of cells, tissues, organs, and organisms are determined by the division of cells during embryogenesis. A embryo is created after a sperm fertilises an egg. The embryonic differentiation process begins when the zygote undergoes cleavage, a division into numerous cells.

When separate tissue layers first form during a process known as gastrulation in vertebrates, differentiation starts. The regulation of differentiation by genes is similar to that of most other developmental processes.

To know more about cellular processes visit:-

https://brainly.com/question/17772081

#SPJ9

Aluminum and iron oxide (Fe₂O₃) react together to produce aluminum oxide, 20 g of Fe₂O3 will produce 14 g of Fe.

Oxide is a category of chemical compound that has one or more oxygen atoms and also another element in its composition.

2Al +  Fe₂O₃ -> Al₂O₃ + 2Fe

Molar mass of Fe₂O₃ is: (2 x 56) + (3 x 16) = 160 g/mol

moles of Fe2O3 = 20 g / 160 g/mol = 0.125 mol

As the reaction is carried out with an excess of Al, we can assume that all of the Fe₂O₃ is consumed and that 2 moles of Fe are produced for every mole of Fe₂O₃

moles of Fe = 2 x moles of Fe₂O₃ = 0.25 mol

Molar mass of Fe is : 56 g/mol

So the mass of Fe produced is:

mass of Fe = moles of Fe x molar mass of Fe

mass of Fe = 0.25 mol x 56 g/mol = 14 g

Therefore, 20 g of Fe₂O₃ will produce 14 g of Fe.

To know more about oxides, refer

https://brainly.com/question/30368235

#SPJ1