Ganymede's period in Earth days is approximately 7.16 days.
The period of Ganymede in Earth days can be calculated using Kepler's Third Law of Planetary Motion, which states that the square of a planet's period (in Earth days) is proportional to the cube of its average distance from the center of its orbit. Mathematically, this can be represented as:
(T1^2/T2^2) = (R1^3/R2^3)
Where T1 and T2 are the periods of Io and Ganymede respectively, and R1 and R2 are their distances from Jupiter's center. Substituting the given values for Io and Ganymede, we get:
(1.8²/T2²) = (4.2³/10.7³)
Solving for T2, we get:
T2 = 7.16 Earth-days
As a result, Ganymede's period on Earth is around 7.16 days.
To know more about the Galileo, here
https://brainly.com/question/19129015
#SPJ4
The type of faucet that used a rotating cylinder to control the water temperature and the rate of water flow by using a balancing piston is called a
The type of faucet that uses a rotating cylinder to control water temperature and the rate of water flow by using a balancing piston is called a thermostatic mixing valve.
A thermostatic mixing valve is a mechanical device designed to provide precise control over the temperature of the water coming out of the faucet. It is commonly used in showers, baths, and other plumbing fixtures where maintaining a consistent and comfortable water temperature is important.
The valve consists of a central rotating cylinder that contains both hot and cold water inlets. As you turn the handle or lever of the faucet, the cylinder rotates, allowing you to adjust the proportion of hot and cold water that mixes together.
Inside the cylinder, there is a balancing piston that is sensitive to changes in water temperature and pressure. This piston helps to maintain a consistent temperature by adjusting the flow rates of hot and cold water.
When you set the desired temperature, the piston moves to balance the flow of hot and cold water, ensuring that the mixed water remains at a constant temperature regardless of any fluctuations in the supply temperature or pressure.
To learn more about temperature, refer below:
https://brainly.com/question/11464844
#SPJ11
QUESTION 2
A model airplane with mass, m = 0. 50 kg is tethered by a wire so that it flies in a circle 0. 20 m in radius. The airplane engine provides a net thrust of
0. 6 N perpendicular to tethering wire. Find the angular acceleration of the airplane when it is level flight. (Take moment of inertia I = mr2
O a.
12. 6 rad/ s2
Ob. 0. 58 rad/s2
Oc.
5. 08 rad/ s
od 6 rad/s?
The net force acting on the airplane is the centripetal force required to keep the airplane moving in a circular path. The angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
The centripetal force is given by:
[tex]F = m * a_c[/tex]
where
F is the net force,
m is the mass of the airplane, and
[tex]a_c[/tex] is the centripetal acceleration.
The centripetal acceleration is given by:
[tex]a_c = v^2 / r[/tex]
where
v is the speed of the airplane and
r is the radius of the circle.
Since the airplane is in level flight, the net thrust of the engine is perpendicular to the tethering wire.
Therefore, it does not contribute to the centripetal force. The centripetal force is provided by the tension in the wire.
The tension in the wire is given by:
[tex]T = F_c = m * a_c[/tex]
where [tex]F_c[/tex] is the centripetal force.
The angular acceleration of the airplane is given by:
[tex]\alpha = a_c / r[/tex]
Substituting the values given:
[tex]F_c = m * a_c[/tex]
= T = 0.6 N
[tex]a_c = v^2 / r[/tex]
[tex]0.6 N = m * v^2 / r[/tex]
[tex]v^2 = F_c * r / m[/tex]
[tex]v = \sqrt{ (F_c * r / m)[/tex]
[tex]=\sqrt{(0.6 N * 0.2 m / 0.5 kg)[/tex]
= 0.49 m/s
[tex]a_c = v^2 / r[/tex]
= 0.49 m/s / 0.2 m
= 2.45 [tex]m/s^2[/tex]
[tex]\alpha = a_c / r[/tex]
[tex]= 2.45 m/s^2 / 0.2 m[/tex]
= 12.25 [tex]rad/s^2[/tex]
Therefore, the angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
To know more about centripetal force refer here
brainly.com/question/14249440#
#SPJ11
How much is the rod stretched (change in length of ΔL ) when the ride is at rest? (Figure 2)Assume that each airplane with two riders has a total weight of 1900 N and that the rods are vertical when the ride is at rest.
According to the question the rod is stretched by 0.0009 mm when the ride is at rest.
What is length?Length is the measurement of the size of an object or the distance between two points. It is typically measured in units of length such as centimeters, meters, or feet. Length is also used to describe a physical dimension or an abstract concept such as time or distance. In mathematics, length is a fundamental concept that is used in various areas of study, including geometry, calculus, and trigonometry.
The total weight of the two riders is 1900 N, and the rod is vertical when the ride is at rest. To calculate the change in length of the rod (ΔL), we must use the equation:
ΔL = W/AE
Where W is the weight, A is the area of the cross-sectional rod, and E is the Young's Modulus of the material.
For a steel rod with a circular cross section, the area A is equal to πr2, where r is the radius of the rod. Assuming that the rod is 10 mm in diameter, the radius is 5 mm, and the area is approximately 78.5 mm2.
The Young's Modulus of steel is approximately 200 GPa.
Plugging these values into the equation, we get:
ΔL = (1900 N) / (200 GPa)(78.5 mm²)
ΔL = 0.0009 mm
Therefore, the rod is stretched by 0.0009 mm when the ride is at rest.
To learn more about length
https://brainly.com/question/28615861
#SPJ4
Give an example of experiment in the scientific method?
Answer:
An example would be, “If I grow grass seeds under green light bulbs, then they will grow faster than plants growing under red light bulbs.” Experiment – The fun part!
Explanation:
have a nice day.
A helicopter descends vertically to land with a speed of 4. 0 m/s. If the shock absorbers have an initial length of 0. 50 m, they compress to 79% of their original length and the air in the tires absorbs 21% of the initial energy as heat, what is the ratio of the spring constant to the helicopter's mass
k/m = (2 * g * Δh) / [((1 - 0.79) * original length)^2] - (2 * g * Δh) * 0.21 / E
To determine the ratio of the spring constant to the helicopter's mass, we need to consider the change in potential energy and the work done by the shock absorbers.
Change in Potential Energy:
The change in potential energy of the helicopter as it descends can be calculated using the formula: ΔPE = mgh, where m is the mass of the helicopter, g is the acceleration due to gravity, and h is the change in height.
In this case, the helicopter descends vertically, so the change in height is equal to the compression of the shock absorbers.
ΔPE = mgΔh
Work Done by the Shock Absorbers:
The work done by the shock absorbers can be calculated using the formula: W = (1/2)kΔx^2, where k is the spring constant and Δx is the change in length of the shock absorbers.
In this case, the shock absorbers compress to 79% of their original length, which means the change in length is Δx = (1 - 0.79) * original length.
W = (1/2)k[(1 - 0.79) * original length]^2
Energy Absorbed by the Air in the Tires:
The energy absorbed by the air in the tires can be calculated as a percentage of the initial energy. Let's denote the initial energy as E.
Energy absorbed = 0.21 * E
Since the energy absorbed by the air in the tires is heat energy, it does not contribute to the work done by the shock absorbers.
Equating the Energy:
The change in potential energy is equal to the sum of the work done by the shock absorbers and the energy absorbed by the air in the tires:
ΔPE = W + Energy absorbed
mgΔh = (1/2)k[(1 - 0.79) * original length]^2 + 0.21 * E
Now we can solve for the ratio of the spring constant (k) to the helicopter's mass (m):
k/m = (2 * g * Δh) / [((1 - 0.79) * original length)^2] - (2 * g * Δh) * 0.21 / E
Please note that to obtain a specific numerical value for the ratio, we would need to know the values of g, Δh, original length, and E.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
PLEASE HELP!
1. 3 statements about limiting frictional force between two surfaces are given below.
A - Nature of surfaces in contact affects to limiting frictional force.
B - Normal reaction between them affects to limiting frictional force.
C - Area of surfaces in contact affects to limiting frictional force.
Correct statement / statements from above A, B, C is/ are,
(1) A
(2) B
(3) A and C
(4) A, B and C
The statements about limiting frictional force between two surfaces are given below(3) A and C is correct option.
The nature of surfaces in contact affects the limiting frictional force because the coefficient of friction depends on the properties of the surfaces in contact.
The area of surfaces in contact also affects the limiting frictional force because a larger surface area in contact results in a larger normal force, which increases the maximum frictional force that can be generated.
The normal reaction between the surfaces in contact is not directly related to the limiting frictional force, as it only affects the magnitude of the frictional force and not its limit. Therefore, statement B is not correct.
Thus the correct option is (3).
To know more about frictional force
https://brainly.com/question/30280752
#SPJ1
A plate falls vertically to the floor and breaks up into three pieces, which slide along the floor. Immediately after the impact, a 320-g piece moves along the x-axis with a speed of 2. 00 m/s and a 355-g piece moves along the y-axis with a speed of 1. 50 m/s. The third piece has a mass of 100 g. In what direction does the third piece move? you can neglect any horizontal forces during the crash.
The third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.
We can start the problem by using conservation of momentum. The momentum before the impact is zero since the plate is at rest, and the momentum after the impact is the sum of the momenta of the three pieces.
Since there are no horizontal forces during the crash, the total momentum is conserved in the x and y directions separately.
Let's call the velocity of the third piece v and assume it moves at an angle θ relative to the x-axis. Then we can write the following equations:
Initial momentum in x-direction = Final momentum in x-direction
0 = 0.32 kg * 2.00 m/s + 0.355 kg * 0 m/s + 0.1 kg * v cos(θ)
Initial momentum in y-direction = Final momentum in y-direction
0 = 0.32 kg * 0 m/s + 0.355 kg * 1.50 m/s + 0.1 kg * v sin(θ)
Simplifying these equations, we get:
0.64 = 0.1 v cos(θ)
0.535 = 0.1 v sin(θ)
We can divide the second equation by the first equation to get:
tan(θ) = 0.535/0.64 = 0.836
Taking the inverse tangent of both sides, we get:
θ = 39.8°
Therefore, the third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.
To know more about momentum refer here
https://brainly.com/question/29220242#
#SPJ11
You look up and see a helicopter pass directly overhead. 3. 10s later you hear the
sound of the engine. If the air temperature is 23. 0°C, how high was the helicopter
flying?
The helicopter was flying at an approximate height of 1070.13 meters.
To determine the height at which the helicopter was flying, we can use the speed of sound and the time delay between seeing the helicopter and hearing the sound.
The speed of sound in air depends on the temperature of the air. The relationship between the speed of sound (v) and the air temperature (T) can be approximated by the equation:
v = 331.5 m/s + 0.6 m/s/°C * T
Given:
Time delay between seeing the helicopter and hearing the sound = 3.10 s
Air temperature = 23.0°C
First, let's calculate the speed of sound at the given air temperature:
v = 331.5 m/s + 0.6 m/s/°C * T
v = 331.5 m/s + 0.6 m/s/°C * 23.0°C
v ≈ 331.5 m/s + 13.8 m/s
v ≈ 345.3 m/s
Next, we can calculate the distance traveled by the sound in the time delay:
Distance = Speed × Time
Distance = 345.3 m/s × 3.10 s
Distance ≈ 1070.13 m
Since the sound traveled from the helicopter to your location, the distance is equal to the height at which the helicopter was flying.
To know more about height refer here
https://brainly.com/question/29131380#
#SPJ11
What is the physical state of water at 250 degree centigrade
At 250 degrees Celsius, water is in the gaseous state, specifically as steam or water vapor.
Under normal atmospheric pressure, water boils and undergoes a phase transition from liquid to gas at 100 degrees Celsius. As the temperature increases beyond the boiling point, the water molecules gain enough energy to overcome intermolecular forces and transition into the gaseous state.
Therefore, at 250 degrees Celsius, water exists as a gas or steam rather than as a liquid.
The boiling point of water, where it transitions from liquid to gas, occurs at 100 degrees Celsius at standard atmospheric pressure (1 atmosphere or 101.3 kilopascals). At temperatures below the boiling point, water exists as a liquid.
Therefore, at 250 degrees Celsius, water is well above its boiling point. It would be in the form of a hot liquid rather than a gas. The high temperature causes the water molecules to have greater kinetic energy, resulting in increased movement and a higher average temperature of the liquid.
It's important to note that the state of water can change depending on the pressure. At higher pressures, the boiling point of water increases, and at lower pressures, it decreases.
However, under standard atmospheric pressure, water at 250 degrees Celsius would still remain in the liquid state.
To know more about atmospheric pressure refer here
https://brainly.com/question/31634228#
#SPJ11
An object is placed to the left of a converging lens. Which of the following statements are true, and which are false? a) The image is always to the right of the lens. b) The image can be upright or inverted
The statement "The image is always to the right of the lens" is false.
However, the statement "The image can be upright or inverted" is true.
When an object is placed to the left of a converging lens, the image can be formed in different positions depending on the distance of the object from the lens and the focal length of the lens.
If the object is located at a distance greater than twice the focal length of the lens, the image will be real, inverted and located to the right of the lens.
If the object is located between the focal length and twice the focal length of the lens, the image will still be real and inverted but located on the same side of the lens as the object.
If the object is located at a distance less than the focal length of the lens, the image will be virtual, upright and located on the same side of the lens as the object.
To know more about converging lens refer here
https://brainly.com/question/28348284#
#SPJ11
Six spaceships with rest lengths L0 zoom past an intergalactic speed trap. The officer on duty records the speed of each ship, v. (No ship is going in excess of the stated speed limit of c , so she doesn’t have to pull anyone over for a ticket. )
The speeds of the six spaceships will be recorded differently by observers in different frames of reference, and their recorded speeds will depend on their relative positions and orientations to the observer.
According to Einstein's theory of relativity, the speed of an object is not an absolute quantity but is relative to the observer's frame of reference. In the case of the six spaceships, as they zoom past the intergalactic speed trap, their speeds will be recorded differently by an observer in different frames of reference.
Assuming the observer is at rest with respect to the speed trap, the speeds of the spaceships can be calculated using the formula [tex]$v = c \left(\sqrt{1-\left(\frac{L_0}{L}\right)^2}\right)$[/tex], where c is the speed of light, L0 is the rest length of the spaceship, and L is the length of the spaceship as measured by the observer.
Therefore, the recorded speeds will depend on the observer's position relative to the direction of the spaceship's motion. If the observer is directly in front of the spaceships, the lengths of the spaceships will be contracted, and their speeds will appear higher than if the observer was behind them.
To learn more about spaceships
https://brainly.com/question/30031772
#SPJ4
A traffic fanatic wants to estimate the maximum number of cars that can safely travel on a particular road at a given speed. She assumes that each car is 18 feet long, travels at speed s, and follows the car in front of it at a safe distance for that speed. She finds that the number N of cars that can pass a given spot per minute is modeled by the function N(s)
To estimate the maximum number of cars that can safely travel on a road at a given speed, the traffic fanatic should consider the free-flow speed, headway between cars at different speeds, and other factors affecting traffic flow.
The traffic fanatic's assumption is based on the concept of traffic flow theory, which aims to understand and predict the behavior of traffic on a road network. The safe distance between cars is known as the "headway" and it is dependent on the speed of the cars.
The traffic flow theory proposes that the maximum traffic flow occurs at a certain speed called the "optimal speed" or "free-flow speed". At this speed, the headway between cars is minimized, and the maximum number of cars can safely travel on the road.
The function N(s) represents the number of cars that can pass a given spot per minute at a given speed s. In this case, the function is modeled as N(s) = 150, which means that the maximum number of cars that can pass the given spot per minute is 150, regardless of the speed.
However, in reality, the number of cars that can pass a given spot per minute varies with speed. At speeds lower than the free-flow speed, the headway between cars increases, and the number of cars that can pass the given spot decreases. At speeds higher than the free-flow speed, the headway between cars decreases, and the number of cars that can pass the given spot also decreases due to increased congestion and potential accidents.
Therefore, to estimate the maximum number of cars that can safely travel on a particular road at a given speed, the traffic fanatic should consider the free-flow speed and the headway between cars at different speeds. She can use traffic flow models such as the Greenshields model or the Underwood model to estimate the traffic flow at different speeds and densities.
To learn more about traffic flow
https://brainly.com/question/26107179
#SPJ4
A metal wire of diameter 1. 00 mm can support a tension of 0. 240 kn. A construction worker needs a cable made of these wires to support a tension of 20. 0 kn. The cable should have diameter (in cm) of what order of magnitude?
The cable should have a diameter of approximately 0.092 cm or an order of magnitude of one centimeter.
To determine the diameter of the cable needed to support a tension of 20.0 kN, we can use the principle of cross-sectional area. The maximum tension that a wire can withstand is proportional to its cross-sectional area. Therefore, to support a tension that is 83.33 times greater than the maximum tension of a single wire, the cross-sectional area of the cable must also be 83.33 times greater.
The cross-sectional area of a wire is given by the formula A = πr², where A is the cross-sectional area, and r is the radius of the wire. Since the diameter of the wire is given as 1.00 mm, the radius is 0.50 mm or 0.005 cm. Therefore, the cross-sectional area of a single wire is:
A₁ = π(0.005 cm)² = 0.00007854 cm²
To find the diameter of the cable, we can use the formula for the cross-sectional area of a circle:
A₂ = πr₂²
where A₂ is the cross-sectional area of the cable and r₂ is the radius of the cable.
We know that the cross-sectional area of the cable needs to be 83.33 times greater than the cross-sectional area of a single wire:
A₂ = 83.33 A₁ = 83.33 x 0.00007854 cm² = 0.00654 cm²
Substituting this value into the formula for the cross-sectional area of a circle:
πr₂² = 0.00654 cm²
r₂² = 0.00654/π
r₂ = √(0.00654/π) = 0.046 cm
Therefore, the radius of the cable is 0.046 cm, and the diameter is twice that:
d = 2r₂ = 0.092 cm or 0.92 mm (to two significant figures)
In conclusion, the cable should have a diameter of the order of magnitude of one centimeter (0.092 cm).
To learn more about tension
https://brainly.com/question/30033702
#SPJ4
A ball of mass 4 kg travelling at 10 m/s makes an elastic head-on collision with another ball of mass 1 kg which is at rest. After the collision, the speed of the lighter ball is
*
zero
less than 10 m/s
equal to 10 m/s
greater than 10 m/s .
Answer:
less than 10 m/s
Explanation:
The 1 kg ball moves after the elastic collision, so you know its speed is > 0.
Due to the law of conservation of momentum, you know the total momentum before the collision must equal the total momentum after the collision. Some of the momentum from the 4 kg ball transfers to the 1 kg ball (which is at rest) when they collide. The 4 kg ball slows down after the collision and the lighter ball moves after the collision, but at a speed less than 10 m/s.
A 5 kg bowling ball is at rest next to an 8 kg bowling ball. Rory thinks it would be a good idea to put an M80 between them and see what happens after the explosion. Since he is working by himself, he can only measure the speed of one ball. He calculates that the speed of the 5 kg ball is 1. 3 m/s to the left. What must the speed of the 8 kg ball be?
The speed of the 8 kg ball must be 0.83 m/s to the right.
To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a system of objects is conserved if no external forces act on the system. Before the explosion, the total momentum of the system is zero since both balls are at rest.
After the explosion, the total momentum of the system is still zero, so the momentum of the 5 kg ball to the left must be balanced by the momentum of the 8 kg ball to the right. We can use the formula for momentum, which is momentum = mass x velocity. Let v be the velocity of the 8 kg ball after the explosion.
Then we have
5 kg x (-1.3 m/s) + 8 kg x v = 0
Solving for v, we get:
v = (5 kg x 1.3 m/s) / 8 kg = 0.8125 m/s
Since the velocity is to the right, we get:
v = 0.83 m/s to the right.
To know more about the Speed, here
https://brainly.com/question/31241752
#SPJ4
Measuring the length from the lowest point of a spring-mass to the highest point, it is found to be 42 cm. What is the amplitude?
a. 42cm
b. 0. 42m
c. 84cm
d. 21cm
Therefore, the amplitude is: amplitude = 21 cm. So, the correct answer is d. 21cm.
A periodic variable's amplitude measures the change it undergoes throughout a single period. When measured against a standard value, a non-periodic signal's amplitude is its magnitude. There are several definitions of amplitude, all of which depend on how much the extreme values of the variable deviate from one another.
The amplitude of a spring-mass system is half the distance between the equilibrium position (the rest position of the mass) and the highest point of the oscillation (the crest).
Since the length from the lowest point to the highest point of the oscillation is given as 42 cm, the total displacement of the oscillation is 2 times the amplitude.
Therefore, the amplitude is:
amplitude = 42 cm / 2 = 21 cm
So, the correct answer is d. 21cm.
Learn more about amplitude Visit: brainly.com/question/3613222
#SPJ4
A cardboard box sits on top of an asphalt driveway. the coefficient of static friction is 0.7 and the coefficient of friction is 0.4 . the mass of the box is 10 kg and a horizontal force of 15 n is applied. what is the gravitational force?
what is the frictional force?
what is the acceleration?
According to the question, the gravitational force is 98 N. The frictional force is 39.2 N. The acceleration is 1.5 m/s².
What is gravitational force?Gravitational force is a natural phenomenon that exists between any two objects with mass. It is the force of attraction between two masses that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. This force is usually expressed in Newton's law of universal gravitation, where the force of gravity between two objects can be calculated by multiplying their masses and dividing by the square of the distance between them.
The gravitational force is the force of gravity that acts on the box and is equal to the mass of the box times the acceleration due to gravity.
Gravitational force = 10 kg × 9.8 m/s² = 98 N
The normal force is equal to the mass of the box times the acceleration due to gravity.
Frictional force = coefficient of friction × normal force
= 0.4 × (10 kg × 9.8 m/s²)
= 39.2 N
The acceleration of the box is calculated using Newton's second law of motion, which states that the net force on an object is equal to the mass of the object times its acceleration.
Net force = mass × acceleration
15 N = 10 kg × a
a = 1.5 m/s²
To learn more about gravitational force
https://brainly.com/question/72250
#SPJ4
Particles q1, 92, and q3 are in a straight line.
Particles q1 = -1. 60 x 10-19 C, 92 = +1. 60 x 10-19 C,
and q3 = -1. 60 x 10-19 C. Particles 91 and q2 are
separated by 0. 001 m. Particles q2 and q3 are
separated by 0. 001 m. What is the net force on 92?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-1. 60 x 10-19 C
+1. 60 x 10-19
-1. 60 x 10-19 C
91
+ 92
93
0. 001 m
0. 001 m
The net force on particle 92 is zero, which means it is in equilibrium and not accelerating.
The electric force between charged particles can be calculated using Coulomb's law, which states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them.
To find the net force on particle 92, we need to calculate the electric forces acting on it due to the other particles in the line. The force on particle 92 due to particle 91 can be calculated using Coulomb's law:
F_92,1 = kq_1q_2 / r²
= (9x10⁹ Nm²/C²) * (-1.60x10⁻¹⁹ C) * (1.60x10⁻¹⁹ C) / (0.001 m)²
= -2.30x10⁻¹⁴ N
The force on particle 92 due to particle 93 can also be calculated using Coulomb's law:
F_92,3 = kq_2q_3 / r²
= (9x10⁹ Nm²/C²) * (-1.60x10⁻¹⁹ C) * (-1.60x10⁻¹⁹ C) / (0.001 m)²
= 2.30x10⁻¹⁴ N
Since the forces due to particles 91 and 93 are equal in magnitude but opposite in direction, they cancel out each other. As a result, the net force acting on particle 92 is zero.
To know more about the Particles, here
https://brainly.com/question/29023558
#SPJ4
An open steel can of volume 216 L
is filled to the top with gasoline at
13. 5°C. When it warms to
36. 0°C, how much gas spills
over? (Don't forget, both the can
and the gasoline are expanding. )
B = 36•10-6 C-1
a = 12•10-6 0-1
Iron or Steel
Gasoline
B = 950•10-6C-1
(Unit = L)
Because the gasoline expands more quickly than the steel can,4.44 L is the amount that will overflow
Define thermal expansion.
The propensity of matter to vary in volume in response to temperature changes is known as thermal expansion. A substance's particles move more when it is heated, maintaining a greater average separation. Thermosets experience linear thermal expansion since they are employed in solid form.
The phenomena known as thermal expansion can be seen in solids, liquids, and gases. An object or body expands during this process when heat (temperature) is applied. The term "thermal expansion" refers to an object's propensity to change its dimensions as a result of heat, including length, density, area, and volume.
volume 216 L
Temperature T1 is 13. 5°C, T2 is 36. 0°C
T will be 22.5 K
Amount of gasoline that overflows:
9.14 x 10(-6)/K *V*T^2
9.14 x 10(-6)/K x 216 L x 22.5 K x 22.5 K = 4.44 L
To learn more about thermal expansion :
https://brainly.com/question/15320204
#SPJ4
coherent microwaves of wavelength 5.00 cm enter a long, narrow window in a building otherwise essentially opaque to the microwaves. if the window is 45.0 cm wide, what is the distance from the central maximum to the first-order minimum along a wall 6.50 m from the window?
The distance from the central maximum to the first-order minimum along a wall 6.50 m from the window is approximately 0.764 m.
To solve this problem, we can use the equation for the distance between adjacent maxima or minima in a single-slit diffraction pattern:
d*sin(theta) = m*lambda
where d is the width of the slit (in this case, the width of the window), theta is the angle between the direction of the diffracted wave and the direction of the incident wave, m is the order of the maximum or minimum (0 for the central maximum, 1 for the first-order minimum, 2 for the second-order maximum, etc.), and lambda is the wavelength of the microwaves.
We can rearrange this equation to solve for the distance between the central maximum and the first-order minimum:
sin(theta) = m*lambda/d
For the first-order minimum, m = 1. Plugging in the given values, we get:
sin(theta) = (1)*(5.00 cm)/(45.0 cm) = 0.111
To find the angle theta, we can use the small-angle approximation:
theta = sin(theta) = 0.111
Now we can use basic trigonometry to find the distance from the window to the first-order minimum on the wall:
tan(theta) = opposite/adjacent
opposite = tan(theta)*adjacent = tan(0.111)*(6.50 m) = 0.764 m
To learn more about : distance
https://brainly.com/question/26550516
#SPJ11
A sound source emits 20.0 w of acoustical power spread equally in all directions. the threshold of hearing is 1.0 × 10-12 w/m2. what is the sound intensity level 30.0 m from the source?
The sound intensity level 30.0 m from the source is approximately 92.5 dB.
To find the sound intensity level 30.0 m from the source, we need to follow these steps:
1. Calculate the sound intensity (I) at 30.0 m from the source:
Since the acoustical power (P) is spread equally in all directions, we can use the formula I = P / (4πr²),
where r is the distance from the source (30.0 m). So,
I = (20.0 W) / (4π × (30.0 m)²)
I = 20.0 / (4 × 3.14159 × 900)
I ≈ 1.77 × 10⁻³ W/m²
2. Calculate the sound intensity level (β) using the formula β = 10 × log10(I/I₀), where I₀ is the threshold of hearing (1.0 × 10⁻¹² W/m²). So,
β = 10 × log10((1.77 × 10⁻³ W/m²) / (1.0 × 10⁻¹² W/m²))
β ≈ 10 × log10(1.77 × 10⁹)
β ≈ 10 × (9.2477)
β ≈ 92.5 dB
The sound intensity level 30.0 m from the source is approximately 92.5 dB.
To know more about intensity level 30.0 refer here
brainly.com/question/11993021#
#SPJ11
an electrolytic cell is defined as: group of answer choices a cell in which a nonspontaneous reaction produces an electric current a cell in which an electric current drives a nonspontaneous reaction no correct answer a cell in which a spontaneous reaction produces an electric current a cell in which an electric current drives a spontaneous reaction
An electrolytic cell is defined as a cell in which an electric current drives a nonspontaneous reaction. The correct answer is B)
An electrolytic cell is a type of electrochemical cell that uses electrical energy to drive a nonspontaneous chemical reaction. In contrast to a galvanic cell, where a spontaneous chemical reaction produces an electric current, an electrolytic cell uses an external power source to drive an otherwise nonspontaneous reaction.
In an electrolytic cell, a voltage is applied to the electrodes, causing electrons to flow from the anode to the cathode. The anode is the electrode where oxidation occurs, and the cathode is the electrode where reduction occurs.
The electrical energy is used to force the nonspontaneous reaction to occur, with the electrode reactions being driven in the opposite direction to their natural direction.
The process of electrolysis is used in a wide range of industrial applications, such as the production of aluminum, chlorine, and sodium hydroxide. It is also used in electroplating and in the purification of metals.
The correct answer is B)
To learn more about electrolytic cell click on,
https://brainly.com/question/16097738
#SPJ4
Why is the microscopy slide shining with a blue light.
Fluorescence is a phenomenon where a substance absorbs light at one wavelength and then emits light at a longer wavelength. Some substances, such as certain dyes and proteins, have the ability to fluoresce when excited by light. This fluorescence emission is often in a different color than the original excitation light.
In microscopy, fluorescent dyes or proteins are often used to label or tag specific structures or molecules within a sample. When excited by a specific wavelength of light, they emit a fluorescence signal that can be detected and imaged.
In this case, if the sample on the microscopy slide has been labeled with a fluorescent dye or protein that emits blue light when excited, then the slide would appear to be shining with a blue light when viewed through the microscope.
To know more about Fluorescence refer here
https://brainly.com/question/24228588#
#SPJ11
A 1. 0-kg wheel in the form of a solid disk rolls along a horizontal surface with a speed of 6. 0 m/s. What is the total kinetic energy of the wheel
The total kinetic energy of the wheel is 18 Joules.
The total kinetic energy of the wheel can be calculated using the formula:
K = (1/2)mv^2
where m is the mass of the wheel and v is its velocity.
In this case, the mass of the wheel is given as 1.0 kg and the velocity is 6.0 m/s.
Plugging these values into the formula, we get:
K = (1/2)(1.0 kg)(6.0 m/s)^2 = 18 J
Therefore, the total kinetic energy of the wheel is 18 Joules.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
Can anyone solve this question PLEASE hurry❗️⚠️
Answer:
vii. c
ix. a
x. d
Explanation:
trust
What is the velocity of a soccer ball in meters per second (m/s) with a mass of 1.0 kg that is kicked from rest if the coefficient of restitution between the ball and the foot is 0.48? the initial velocity of the foot is 16.1 m/s and has a mass of 7.8 kg.
The final velocity of the soccer ball is 65.2 m/s. This is to calculate the momentum of the foot before collision. Use coefficient of restitution to calculate velocity of separation.
To find the velocity of the soccer ball after being kicked, we can use the law of conservation of momentum and the coefficient of restitution. The law of conservation of momentum states that the momentum before the collision is equal to the momentum after the collision.
Here's how we can solve the problem:
Calculate the momentum of the foot before the collision:
Momentum = mass x velocity = 7.8 kg x 16.1 m/s = 125.58 kg m/s
During the collision, some of the momentum is transferred to the ball. The amount of momentum transferred depends on the coefficient of restitution, which is given as 0.48. The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach.
Use the coefficient of restitution to calculate the velocity of separation:
Velocity of separation = coefficient of restitution x velocity of approach
Velocity of separation = 0.48 x 16.1 m/s = 7.728 m/s
Calculate the velocity of the ball after the collision using the law of conservation of momentum:
Momentum before collision = Momentum after collision
(7.8 kg x 16.1 m/s) = (1.0 kg x velocity of ball) + (7.8 kg x 7.728 m/s)
125.58 kg m/s = 1.0 kg x velocity of ball + 60.38 kg m/s
Velocity of ball = (125.58 kg m/s - 60.38 kg m/s)/1.0 kg
Velocity of ball = 65.2 m/s
Therefore, the velocity of the soccer ball after being kicked is 65.2 m/s.
In summary, we can use the law of conservation of momentum and the coefficient of restitution to find the velocity of the soccer ball after being kicked. The momentum before the collision is equal to the momentum after the collision.
The coefficient of restitution is the ratio of the velocity of separation to the velocity of approach. Using these equations, we calculated the velocity of the soccer ball to be 65.2 m/s.
To know more about velocity refer here:
https://brainly.com/question/19979064#
#SPJ11
- Look at the part of your circuit that connects the battery, switch, and red bulb.
Do you have them wired in series or parallel?
The part of the circuit that connects the battery, switch, and red bulb is a critical component in ensuring that the circuit functions correctly. The battery is the power source that provides the energy needed to light up the red bulb, while the switch is the control mechanism that allows the user to turn the circuit on and off.
When the switch is closed, the circuit is completed, and the battery's energy is directed through the wires and into the red bulb. The bulb then converts this energy into light, illuminating the area around it. However, when the switch is open, the circuit is broken, and no energy flows through it.
It is essential to ensure that the connections in this part of the circuit are secure and correctly placed. Any loose or improper connections can cause the circuit to malfunction or not work at all. Additionally, it is crucial to use the correct voltage and amperage rating for the battery and bulb to ensure that they operate within their specified limits and do not damage the circuit.
Overall, the part of the circuit that connects the battery, switch, and red bulb is a crucial component that enables the circuit to function correctly. By ensuring that the connections are secure and the components are properly rated, users can enjoy a safe and reliable circuit that lights up the area around them.
To know more about battery refer here
https://brainly.com/question/11670669#
#SPJ11
If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s
when it travels a distance of 5 m to the right, determine the magnitude of
force P acting on the crate. The coefficient of kinetic friction between the
crate and the ground is μk = 0. 3
If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s when it travels a distance of 5 m to the right. The magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.
To determine the magnitude of force P acting on the crate, we need to use the equations of motion and the concept of friction. The force acting on the crate can be expressed as the sum of the force due to P and the force due to friction.
First, we can calculate the force due to friction, which is given by the formula Ff = μk x Fn, where Fn is the normal force acting on the crate. Fn can be calculated by multiplying the mass of the crate by the acceleration due to gravity (9.8 m/s²):
Fn = m x g
Fn = 50 kg x 9.8 m/s²
Fn = 490 N.
Therefore, Ff = 0.3 x 490 N = 147 N.
Next, we can use the equations of motion to calculate the force due to P. We can use the formula[tex]v^2 = u^2 + 2as[/tex], where u = 0 m/s (since the crate starts from rest), v = 4 m/s, and s = 5 m.
Solving for a, we get [tex]a = 4^2 / (2 \times 5) = 1.6\; m/s^2.[/tex] The force due to P can be calculated using the formula F = ma, where m is the mass of the crate:[tex]F = 50 \;kg \times 1.6\; m/s^2 = 80 N.[/tex]
Finally, we can add the force due to friction and the force due to P to get the total force: Ftotal = Ff + F = 147 N + 80 N = 227 N.
Therefore, the magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.
In summary, to determine the magnitude of force P acting on a crate, we can use the equations of motion and the concept of friction. By calculating the force due to friction and the force due to P, we can add them to get the total force acting on the crate.
To know more about magnitude refer here:
https://brainly.com/question/30827927#
#SPJ11
A force that exists between any two objects that have mass
A force that exists between any two objects that have mass: gravity. The correct option is C.
Gravity is a natural force that attracts two objects with mass towards each other. It is the reason why objects fall to the ground when dropped, and it is also responsible for keeping planets and other celestial bodies in their orbits.
The other terms, motion (A), velocity (B), and friction (D), are related to the movement and interaction of objects, but they are not the specific force that exists between objects with mass. Remember, gravity is the force that exists between any two objects that have mass. The correct option is C.
To know more about gravity, refer here:
https://brainly.com/question/14874038#
#SPJ11
Complete question:
A force that exists between any two objects that have mass:
A. motion
B. velocity
C. gravity
D. friction
If both the electric and magnetic fields of an electromagnetic wave double in magnitude, how does the intensity of the wave change
The intensity of an electromagnetic wave will therefore rise by a factor of four if both the electric and magnetic fields of the wave double in magnitude.
The square of the amplitude of the electric field, the square of the amplitude of the magnetic field, or the sum of the amplitudes of the two fields determines the intensity of an electromagnetic wave.
The wave change's intensity grows by a factor of four.
In physics, the transmitted power per unit area measured in the plane perpendicular to the direction of the energy's transmission is known as the intensity or flux of radiant energy. The base unit in the SI system is kg/s³ or watts per square meter (W/m²). With waves like sound waves or electromagnetic waves like light or radio waves, intensity most frequently refers to the average power transfer over the course of the wave. There are various circumstances where energy is transferred to which intensity can be applied.
The energy density (energy per unit volume) at a place in space and the speed at which the source is moving can both be used to determine intensity.
The complete questions is,
If both the electric and magnetic fields of an electromagnetic wave double in magnitude, how does the intensity of the wave change?
To know more about electromagnetic wave
https://brainly.com/question/28325793
#SPJ4