help pls!


Use unit multipliers to convert 123 pounds per mile to ounces per centimeter.

There are 5,280 feet in 1 mile. There are 16 ounces in 1 pound. There are approximately 2.54 cm in 1 inch.

Enter your answer as a decimal rounded to the nearest hundredth. Just enter the number.

Answer:

C is the right answer I think

To find the cost of the house in 1980, divide the cost of the house in 1990 by the rate of increase. The house would have cost approximately $62,200 in 1980 when the CPI was 82.4.

To find the cost of the house in 1980, we need to use the concept of inflation. In this case, we can use the consumer price index (CPI) to compare the prices of the house in 1990 and 1980.

First, we need to determine the rate of increase from 1980 to 1990. The rate of increase is calculated by dividing the CPI in 1990 by the CPI in 1980:

Rate of increase = CPI in 1990 / CPI in 1980 = 130.7 / 82.4 = 1.585

Next, we can use the rate of increase to find the cost of the house in 1980. We divide the cost of the house in 1990 by the rate of increase:

Cost in 1980 = Cost in 1990 / Rate of increase = $98,700 / 1.585 = $62,200.

Therefore, the house would have cost approximately $62,200 in 1980 when the CPI was 82.4.

https://brainly.com/question/32748102

#SPJ3

The coordinates of the images after the translation are K' (-4, 6).

To find the image coordinates of K', we need to translate the coordinates of K 6 units up.

This can be done by adding 6 to the y-coordinate of K.

So, the y-coordinate of K' will be:

y-coordinate of K' = y-coordinate of K + 6

= 0 + 6

= 6

To find the x-coordinate of K', we just need to keep the x-coordinate of K the same, since the translation is only in the vertical direction.

Therefore, the image coordinates of K' are (-4, 6).

So, the correct answer is C. K′(−4, 6).

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

The amount of cardboard  needed to make just one of the larger faces of the carton is 62.72 square inches.

To find out the amount of cardboard  needed to make just one of the larger faces of the carton, we need to first determine the dimensions of the face. Since we know the height of the carton is 7 inches, we need to figure out the length and width of the face.

Assuming the carton is rectangular, we can use the formula for the surface area of a rectangular prism to find the total amount of specialized cardboard needed for the entire carton. The formula is:

Surface area = 2lw + 2lh + 2wh

where l, w, and h are the length, width, and height of the prism, respectively.

We know that the carton requires approximately 349 square inches of specialized cardboard to make, so we can set up the equation:

349 = 2lw + 2lh + 2wh

Since we are only interested in finding the amount of cardboard needed for one of the larger faces, we can assume that one of the dimensions (either length or width) is equal to the height of the carton (7 inches). Let's say that the other dimension is the length (l). Then we can rewrite the equation as:

349 = 2(7)(l) + 2(7)(h) + 2wh
349 = 14l + 14h + 2wh

Now we can substitute the value of h (7) into the equation:

349 = 14l + 14(7) + 2w(7)
349 = 14l + 98 + 14w
251 = 14l + 14w
251/14 = l + w

We don't know the exact dimensions of the face, but we do know that the sum of the length and width is 251/14 inches. Since the face is rectangular, we can assume that the length and width are equal (otherwise it would be a different shape). Therefore, each dimension would be half of 251/14 inches:

l = w = (251/14)/2 = 8.96 inches (rounded to two decimal places)

Now we can use the formula for the area of a rectangle to find the amount of specialized cardboard needed for one face:

Area = length x width
Area = 8.96 x 7
Area = 62.72 square inches

Therefore, approximately 62.72 square inches of specialized cardboard will be needed to make just one of the larger faces of the carton.

Learn more about rectangular prism : https://brainly.com/question/24284033

#SPJ11

Answer:

A = 5026.548246 m²

Step-by-step explanation:

Equation for Area of a Circle: A = πr² where r is the radius.

The radius of a circle is always half the diameter. Since we know the diameter is 80m, we can divide by 2 to find our radius.

80/2 = 40m

Now that we have found our radius, we can plug the value into r and solve.

A = π(40)² = 5026.548246 m²

Nosaira's work is incorrect. Her mistake is in the step where she simplifies the expression 2x+1 on the left side of the equation by multiplying it with 3. She distributed the 3 only to the 2x term, but forgot to distribute it to the 1 term as well.

So, the correct expression on the left side should be 6x+3 instead of 6x+1. This mistake leads to the wrong equation 6x+3=2x^2-1, and when she tries to solve for x, she ends up with the equation 4x=0, which only has one solution, x=0.

Therefore, Nosaira's interpretation of the answer as having no solution is incorrect. The original equation actually does have a solution, which is x=1/2. If we correct the mistake in her work, we can see that the equation becomes [tex]6x+3=2x^2-1[/tex], which simplifies to [tex]2x^2-6x-4=0[/tex]. We can then factor out 2 to get [tex]x^2-3x-2=0[/tex], which can be factored further into (x-2)(x+1)=0. Therefore, the solutions are x=2 and x=-1, but we need to reject the negative solution as it does not satisfy the original equation.

In conclusion, Nosaira made a mistake in distributing the coefficient 3, which led to an incorrect equation and an incorrect interpretation of the answer. It is important to be careful and check our work, especially when dealing with algebraic expressions and equations.

To know more about expression, refer to the link below:

https://brainly.com/question/13733773#

#SPJ11

If a segment from a was drawn to the midpoint of side AB then where would it intersect BM is AN = 2.5cm and MN = 3.5cm.

A midpoint is a point in the midway of a line connecting two locations. The two reference points are the line's ends, and the midpoint is located between the two. The midway splits the line connecting these two places in half. Furthermore, a line drawn to bisect the line connecting these two points passes through the midpoint.

The midpoint formula is used to locate the midway between two places with known coordinates. If we know the coordinates of the other endpoint and the midpoint, we can apply the midpoint formula to obtain the coordinates of the endpoint.

ΔAMN = ΔABC (Corresponding angles)

ΔANM = ΔACB (Corresponding angles)

ΔAMN ≈ ΔABC (By AA similarity test)

[tex]\frac{AM}{AB} =\frac{AN}{AC} =\frac{MN}{BC}[/tex] (CPST)

Since, M is mid-point of AB,

AM = 1/2AB, or, AM/AB = 1/2

AM/AB = AN/AC = 1/2.

AN/AC = 1/2

AN/5 =1/2 [AC = 5cm]

MN/7 =1/2 [BC = 7cm]

MN = 7/2 = 3.5

AN = 2.5cm and MN = 3.5cm.

Learn more about Midpoint:

https://brainly.com/question/28367319

#SPJ4

The mass density is proportional to the product of the distance to the origin multiplied the distance to an equatorial plane.The center of the ball can be placed at the origin.

The mass of ball is M = (2/5)MR^2

To find the mass of a ball of radius R with a mass density that is proportional to the product of the distance to the origin multiplied by the distance to an equatorial plane, we need to first find the equation for the mass density.

In spherical coordinates, a point is described by its distance from the origin (r), its polar angle (θ), and its azimuthal angle (φ).

Using this coordinate system, we can write the mass density as:

ρ(r,θ,φ) = k r^2 sinθ

where k is a constant of proportionality.

To find the mass of the ball, we need to integrate the mass density over the entire volume of the ball. The volume element in spherical coordinates is given by:

dV = r^2 sinθ dr dθ dφ

Integrating the mass density over this volume gives us:

M = ∫∫∫ ρ(r,θ,φ) dV
  = k ∫0^R ∫0^π ∫0^2π r^4 sin^3θ dr dθ dφ
  = 2πk/5 R^5

where R is the radius of the ball.

To find the value of k, we can use the fact that the total mass of the ball is given by:

M = (4/3)πρavg R^3

where ρavg is the average mass density of the ball. From this equation, we can solve for k:

k = (3/4πρavg) = (3/4πR^3)M

Substituting this value of k into our expression for the mass of the ball, we get:

M = (2/5)MR^2

Therefore, the ball's mass is proportional to its radius's square.

To know more about Mass:

https://brainly.com/question/19694949

#SPJ11

Answer:

$264,000

Step-by-step explanation:

PV = $110,000

i = 6%

n = 15 years

Compound formula:

FV = PV (1 + i)^n

FV = 110,000 (1 + 0.06)^15

FV = 110,000 · 2.40(rounded) = $264,000

The vertex form of the equation of the parabola is:

r = (1/24)(y - 1)^2 + 3

Since the directrix is a horizontal line, the axis of the parabola is vertical. Therefore, the vertex form of the equation of the parabola is:

r = a(y - k)^2 + h

where (h, k) is the vertex of the parabola and "a" is a constant that determines the shape and orientation of the parabola.

Since the focus is (3,-5), the vertex of the parabola is halfway between the focus and the directrix. The directrix is 6 units above the vertex, so the vertex is (3,1).

We can use this information to write the vertex form of the equation:

r = a(y - 1)^2 + 3

To find the value of "a", we need to use the distance formula between the vertex and the focus:

distance = |y-coordinate of focus - y-coordinate of vertex| = 6

| -5 - 1 | = |-6| = 6

Using the definition of the parabola, the distance from the vertex to the focus is also equal to 1/(4a). Therefore:

1/(4a) = 6

a = 1/(4*6) = 1/24

Substituting this value of "a" into the vertex form equation, we get:

r = (1/24)(y - 1)^2 + 3

Therefore, the vertex form of the equation of the parabola is:

r = (1/24)(y - 1)^2 + 3

To know more about parabola , refer here :

https://brainly.com/question/11911877#

#SPJ11

The taxi travels 140 kilometers in 210 minutes at a speed of 40 km/h.

Let's calculate the distance a taxi travels in 210 minutes at a speed of 40 km/h.
Convert minutes to hours
Since the speed is given in km/h, we need to convert 210 minutes into hours.

There are 60 minutes in an hour, so divide 210 by 60:
210 minutes ÷ 60 = 3.5 hours
Calculate the distance
Now that we have the time in hours, we can use the formula for distance:
Distance = Speed × Time
In this case, the speed is 40 km/h, and the time is 3.5 hours.

Plug these values into the formula:
Distance = 40 km/h × 3.5 hours
Compute the result
Multiply the speed by the time to find the distance:
Distance = 140 km.

For similar question on speed.

https://brainly.com/question/6504879

#SPJ11

Answer:

#1        (176 - x)°

#2       m∠3 = m∠4 = 90°

Step-by-step explanation:

If a pair of parallel lines are cut by a transversal, there are several angles that are either equal to each other or are supplementary(angles add up to 180°).

For the specific questions...
For #1.

Angles ∠1 and ∠2 are supplementary angles since they are adjacent to each other and lie on the same straight line

Therefore
m∠1 + m∠2= 180°

Given m∠1 = (x + 4)° this becomes

(x + 4)° + m∠2 = 180°

m∠2 = 180° - (x + 4)°

= 180° - x° - 4°

= (176 - x)°

For #2

∠3 and ∠4 are supplementary angles so m∠3 + m∠4 = 180°

If m∠3 = m∠4 each of these angles must be half of 180°

So
m∠3 = m∠4 = 180/2 = 90°

The vector field for  7 (x,y) = xî + xyî (1,3), (-1,2), (3,-2) can be plotted with arrows with magnitude 4 at point (1,3), magnitude 3 at point (-1,2), and magnitude 3 at point (3,-2).

The  given vector field 7 (x,y) = xî + xyî (1,3), (-1,2), (3,-2) can be drawn by plotting arrows at each point (x,y) in the plane with the direction and magnitude of each arrow presented  by the vector

7 (x,y) = xî + xyî.

over point (1,3),

the vector is 7(1,3) = 1î + 3î = 4î.

over point (-1,2),

the vector is 7(-1,2) = -1î - 2î = -3î.

Over point (3,-2),

the vector is 7(3,-2) = 3î - 6î = -3î.

The vector field for  7 (x,y) = xî + xyî (1,3), (-1,2), (3,-2) can be plotted with arrows with magnitude 4 at point (1,3), magnitude 3 at point (-1,2), and magnitude 3 at point (3,-2).

To learn more about vector field ,

https://brainly.com/question/31400700

#SPJ4

A.  The number of shortest lattice paths from (2, 2) to (11, 11) that pass through (8, 10) is 28 * 4 = 112.

B. The number of shortest lattice paths from (2, 2) to (11, 11) that avoid (8, 10) is the total number of paths minus the number of paths that pass through (8, 10), which is 48620 - 112 = 48508.

What is combinatorics?

Combinatorics is a branch of mathematics that deals with counting and arranging the possible outcomes of different arrangements and selections of objects.

For part (a), the number of shortest lattice paths from (2, 2) to (11, 11) that pass through (8, 10) is given by the product of the number of shortest lattice paths from (2, 2) to (8, 10) and from (8, 10) to (11, 11).

To find the number of shortest lattice paths from (2, 2) to (8, 10), we can count the number of ways to choose 6 steps up out of 8 total steps (the remaining 2 steps are to the right), which is 8 choose 6 = 28.

Similarly, the number of shortest lattice paths from (8, 10) to (11, 11) is the number of ways to choose 1 step up out of 4 total steps (the remaining 3 steps are to the right), which is 4 choose 1 = 4.

Therefore, the number of shortest lattice paths from (2, 2) to (11, 11) that pass through (8, 10) is 28 * 4 = 112.

b) To find the number of shortest lattice paths from (2, 2) to (11, 11) that avoid (8, 10), we can use the principle of inclusion-exclusion.

Let's first count the number of shortest lattice paths from (2, 2) to (11, 11) without any restrictions. Since we can only move up or to the right, the number of such paths is the number of ways to choose 9 steps up out of 18 total steps (the remaining 9 steps are to the right), which is 18 choose 9 = 48620.

Next, we count the number of shortest lattice paths from (2, 2) to (11, 11) that pass through (8, 10). Using the method described in part (a), we found that the number of such paths is 28 * 4 = 112.

Therefore, the number of shortest lattice paths from (2, 2) to (11, 11) that avoid (8, 10) is the total number of paths minus the number of paths that pass through (8, 10), which is 48620 - 112 = 48508.

To learn more about combinatorics  from the given link:

https://brainly.com/question/31476844

#SPJ4

The number of bricks that will be required to build the staircase is: 30 bricks

An arithmetic sequence is defined as one where you get the next term by adding a constant, called the common difference, to the previous term. A lot of formulas come from this simple fact. and they allow us to solve for any term in the sequence and even the sum of the first few terms.

The formula for the nth term of an arithmetic sequence is:

aₙ = a₁ + (n - 1)d

where:

a₁ is first term

d is common difference

n is nth term

We are given:

a₁ = 200

d = -4

aₙ = 84

Thus:

84 = 200 + (n - 1)(-4)

84 - 200 = -4n + 4

-4n = -120

n = 30

Read more about arithmetic sequence at: https://brainly.com/question/6561461

#SPJ1

If after 2.00 minutes, Ethan is 195km away from his house towards west, Ethan's velocity is approximately 6393 km/h.

To find Ethan's velocity, we need to first determine the distance he traveled and the time he spent traveling.

Given:
1. Initial position: Ethan's house
2. Distance to park: 85 km south
3. Final position: 195 km west from house after 2 minutes

To find the total distance, we can use the Pythagorean theorem, as the path forms a right triangle:
Distance = √(85² + 195²) = √(7225 + 38025) = √(45250) ≈ 212.72 km

Now, let's convert the time from minutes to hours:
2 minutes = 2/60 hours ≈ 0.0333 hours

Finally, we can calculate Ethan's velocity:
Velocity = Distance / Time = 212.72 km / 0.0333 hours ≈ 6393 km/h

Ethan's velocity is approximately 6393 km/h.

More on velocity: https://brainly.com/question/28694311

#SPJ11

Using the Pythagorean theorem, the height of the ramp in the given diagram is 8.9 ft

From the question, we are to determine how high the ramp is

From the Pythagorean theorem which states that "in a right triangle, the square of the longest side, that is hypotenuse, equals sum of squares of the two other sides".

In the given diagram,

We have a right triangle

The measure of the hypotenuse is 21 ft

One of of the side measures 19 ft

Now, we will calculate x

By the Pythagorean theorem, we can write that

h² + 19² = 21²

h² = 21² - 19²

h² = 441 - 361

h² = 80

h = √80

h = 8.94427 ft

h ≈ 8.9 ft

Hence, the ramp is 8.9 ft high

Learn more on Pythagorean theorem here: https://brainly.com/question/27165976

#SPJ1

Kianah can finish the game in 1, 2, 3, 4, 6, or 12 days, depending on how many levels he plays each day.

To find all the possibilities for the number of days Kianah can play the game without repeating a level, we need to find all the factors of 12. The factors of 12 are 1, 2, 3, 4, 6, and 12. These are all the possible numbers of levels Kianah can play each day without repeating a level.

If Kianah plays 1 level each day, he will finish the game in 12 days. If he plays 2 levels each day, he will finish in 6 days. If he plays 3 levels each day, he will finish in 4 days. If he plays 4 levels each day, he will finish in 3 days. If he plays 6 levels each day, he will finish in 2 days. And if he plays all 12 levels each day, he will finish in 1 day.

Therefore, Kianah can finish the game in 1, 2, 3, 4, 6, or 12 days, depending on how many levels he plays each day. It's important to note that these possibilities assume that Kianah is able to complete all the levels he plays each day without getting stuck or repeating any levels.

To know more about possibilities, refer to the link below:

https://brainly.com/question/30218280#

#SPJ11

Answer:

Rahul:

[tex]53000( {1.02875}^{7} ) = 64631.59[/tex]

Layla:

[tex]53000 {e}^{.0225 \times 7} = 62040.78[/tex]

$64,631.59 - $62,040.78 = $2,590.81

After 7 years, Rahul's account will have $2,591 more than Layla's account.

The most goals scored by the team as shown on the box plot, in a game was 8 goals.

The uppermost value in a box plot is depicted by the upper whisker, and it stretches from the 3rd quartile (Q3) all the way to the maximum data point within 1.5 times the span between the first and third quartiles (IQR) above Q3.

What this means therefore, is that the most goals scored by the team would be 8 goals as this is the point on the box plot that is at the maximum level.

Find out more on box plots at https://brainly.com/question/14277132

#SPJ1

f(1/4) is approximately equal to -2.9974. The problem states that f"(x) = -(sin(x)), which means that the second derivative of the function f(x) is equal to the negative of the sine of x. We are also given that f'(0) = 0 and f(0) = -3.

To find f(1/4), we need to use the information given to us and apply the process of integration. We know that the first derivative of f(x) is f'(x), so we need to integrate f"(x) to find f'(x). Integrating the negative sine function will give us the cosine function, so:

f'(x) = -cos(x) + C

Where C is a constant of integration. To find the value of C, we use the fact that f'(0) = 0:

0 = -cos(0) + C
C = 1

So now we have:

f'(x) = -cos(x) + 1

Next, we integrate f'(x) to find f(x):

f(x) = -sin(x) + x + D

Where D is another constant of integration. We can find the value of D by using the fact that f(0) = -3:

-3 = -sin(0) + 0 + D
D = -3

So finally, we have:

f(x) = -sin(x) + x - 3

Now we can find f(1/4):

f(1/4) = -sin(1/4) + (1/4) - 3
f(1/4) = -0.2474 + 0.25 - 3
f(1/4) = -2.9974

Therefore, f(1/4) is approximately equal to -2.9974.

Learn more about function here:

brainly.com/question/13514866

#SPJ11

The measure of the angles are m∠DWC=138°, ∠AWB = 138°, ∠AWD = 42°, ∠BWC = 42°

The Vertical angle theorem states that if two lines intersect at a point then vertically opposite angles are congruent.

To find the measure of all the angles:

∠AWB and ∠DWC are vertically opposite angles.

Therefore, ∠AWB = ∠DWC

⇒ ∠AWB = 138°

we know that the Sum of all the angles in a straight line = 180°

⇒ ∠AWD + ∠DWC = 180°

⇒ ∠AWD + 138° = 180°

⇒ ∠AWD = 180° – 138°

⇒ ∠AWD = 42°

Since ∠AWD and ∠BWC are vertically opposite angles.

Therefore, ∠AWD = ∠BWC

⇒ ∠BWC = 42°

Learn more about  Vertical angle theorem at: https://brainly.com/question/1673457

#SPJ1

#complete question:

Lines AC←→ and DB←→ intersect at point W. Also, m∠DWC=138° .

Enter the angle measure for the angle shown.

see attached image:

When the parallelogram, diagonals bs and et bisect at each other at o, we get the following answers:

1. In a parallelogram, the diagonals bisect each other. So, if ES = 10 cm, then EO = OS = 5 cm. Since EO and OS are half of the diagonal ET, then ET = EO + OS = 5 cm + 5 cm = 10 cm. Similarly, diagonal BT will also be equal to 10 cm, as it has the same length as diagonal ET.

2. In a parallelogram, opposite sides are equal. So, if BE = 13 cm, then TS = 13 cm, as they are opposite sides.

3. If EO = 6 cm and SO = 7 cm, then the length of diagonal ET is EO + OS = 6 cm + 7 cm = 13 cm. Since the diagonals of a parallelogram are equal, the length of diagonal BS will also be 13 cm.

4. If ET + BS = 18 cm and SO = 5 cm, we can use the fact that diagonals bisect each other to find ET and BS. Let EO = x cm. Then, ET = 2x cm and BS = 2(5-x) cm. Now, we can set up the equation: 2x + 2(5-x) = 18. Solving for x, we get x = 4 cm. So, ET = 2x = 8 cm and BS = 2(5-x) = 10 cm.

To learn more about diagonal, refer below:

https://brainly.com/question/12274248

#SPJ11

The answer is:

[tex]f'(x) = 12.7(4.1^x)(ln(4.1)/x - 2/x^2)[/tex]

The derivative of f(x), we can use the quotient rule. Let's define

Then:

Simplifying this expression gives:

To find the derivative of f(x), we used the quotient rule, which states that the derivative of a quotient of two functions is equal to (the denominator times the derivative of the numerator minus the numerator times the derivative of the denominator) divided by the denominator squared.

In our case, we defined u(x) and v(x) as the numerator and denominator, respectively, and used the formula to find the derivative of f(x).The derivative of u(x) is found using the chain rule and the derivative of [tex]4.1^x[/tex], which is [tex]4.1^x[/tex] times the natural logarithm of 4.1.

The derivative of v(x) is simply 2x. We then substitute these values into the quotient rule formula and simplify the resulting expression to get the final derivative formula:

This formula tells us the slope of the tangent line to the graph of f(x) at any given point x.

Learn more about Quotient rule

brainly.com/question/29255160

#SPJ11

The value of x for the circle is,

⇒ x = 13.2

We have to given that;

In circle Y,

m arc WX = 142°

m ∠WZX = (8x - 35)°

Since, angle WZX is half the measure of arc WX,

Hence, We get;

⇒ (8x - 35)° = 142 / 2

⇒ 8x - 35 = 71

⇒ 8x = 35 + 71

⇒ 8x = 106

⇒ x = 13.2

Thus, The value of x for the circle is,

⇒ x = 13.2

Learn more about the circle visit:

https://brainly.com/question/24810873

#SPJ1

John is approximately 68.26 km away from his starting point after riding 68 km south and then 6 km west.

To find out how far John is from his starting point after riding 68 km south and then 6 km west, we will use the Pythagorean theorem.

The Pythagorean theorem states that in a right-angled triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, we will consider the 68 km south as one side, and the 6 km west as the other side, with the distance from the starting point being the hypotenuse.

Step 1: Square the lengths of the two given sides.
68^2 = 4624
6^2 = 36

Step 2: Add the squared values together.
4624 + 36 = 4660

Step 3: Find the square root of the sum to get the length of the hypotenuse (distance from the starting point).
√4660 ≈ 68.26 km

To learn more about Pythagorean theorem

https://brainly.com/question/14148476

#SPJ11

Answer: 0 g * m/s

Step-by-step explanation:

You first want to multiply 100g, by 12 m/s. This gives you the momentum of the first bird, the answer being 1200 g * m/s

Second, You was to multiply 30g, by 40 m/s. This gives you the momentum of the second bird, The answer also being 1200 g * m/s.

Then, subtract The final answers, and you get 0 g * m/s.

=(100 g)(12 m/s​)+(30 g)(−40 m/s​)

=1200 g⋅ m/s​+(−1200 g⋅ m/s​)

=0 g⋅ m/s

I am not an expert, so I may have gotten some things incorrect.

If this doesn't make sense please consult an expert :,)

The relative speed of the birds is 52 m/s.

We are given that;

Number of blackbirds= 100g

Speed= 12m/s

Now,

The relative speed of the blackbird as seen by the bluebird is:

vblackbird relative to bluebird​=vblackbird​−vbluebird​

vblackbird relative to bluebird​=−12−40

vblackbird relative to bluebird​=−52 m/s

This means that the blackbird is moving to the left at 52 m/s as seen by the bluebird. The relative speed of the bluebird as seen by the blackbird is:

vbluebird relative to blackbird​=vbluebird​−vblackbird​

vbluebird relative to blackbird​=40−(−12)

vbluebird relative to blackbird​=52 m/s

This means that the bluebird is moving to the right at 52 m/s as seen by the blackbird. The relative speed of either bird is equal to the magnitude (absolute value) of their relative velocity.

Therefore, by the speed the answer will be 52 m/s.

Learn more about speed here;

https://brainly.com/question/7359669

#SPJ1

To find f(-1), we can use the fact that the derivative of a function f(x) gives us the slope of the tangent line to the graph of f(x) at any point x. We can use this information along with the given value of f(1) to find the equation of the tangent line at x=1, and then use that equation to find the value of f(-1).

First, we find the equation of the tangent line at x=1:
- The slope of the tangent line at x=1 is f'(1) = 833 + 12(1) + 2 = 847
- The point (1, f(1)) lies on the tangent line, so we can use the point-slope form of the equation of a line to write the equation of the tangent line:
y - (-4) = 847(x - 1)
y + 4 = 847x - 847
y = 847x - 851

Now we can use this equation to find f(-1):
- The point (-1, f(-1)) also lies on the tangent line, so we can substitute x=-1 and solve for y:
f(-1) + 4 = 847(-1) - 851
f(-1) + 4 = -1698
f(-1) = -1702

Therefore, f(-1) = -1702.
To find f(-1), we first need to determine the function f(x). We know f'(x) = 833 + 12x + 2. To find f(x), we need to integrate f'(x) with respect to x:

∫(833 + 12x + 2) dx = 833x + 6x^2 + 2x + C

Now, we use the given condition f(1) = -4 to find the constant C:

-4 = 833(1) + 6(1)^2 + 2(1) + C

Solve for C:

C = -4 - 833 - 6 - 2 = -845

Now we have the function f(x) = 833x + 6x^2 + 2x - 845. To find f(-1), plug in x = -1:

f(-1) = 833(-1) + 6(-1)^2 + 2(-1) - 845

f(-1) = -833 + 6 - 2 - 845

f(-1) = -1674

So, f(-1) equals -1674.

To learn more about function visit;

brainly.com/question/12431044

#SPJ11

The length of UT, to the nearest tenth, is approximately 10.5 inches.

How long is segment UT?

To find the length of UV, we can use the tangent-secant theorem, which states that the square of the length of the tangent segment (UV) is equal to the product of the lengths of the secant segments (RS and ST).

First, we need to find the length of RS + ST:

RS + ST = 8 in + 4 in = 12 in

Next, we can use the formula for the tangent-secant theorem:

[tex]UV^2 = RS * ST[/tex]

[tex]UV^2 = 8 in * 4 in[/tex]

[tex]UV^2 = 32 in^[/tex]

To find the length of UV, we take the square root of both sides:

[tex]UV = √32 in[/tex]

Calculating the square root, we get:

UV ≈ 5.7 in (rounded to the nearest tenth)

Therefore, the length of UV is approximately 5.7 inches.

Learn more about theorem

brainly.com/question/18868430

#SPJ11