How much heat in calories is needed to raise the temp of 125. 0g of lead (Clead=0. 130J / g Celsius) from 17. 5 Celsius to 41. Q Celsius

The evaporation of water and dissolution of CO2 can affect the results of the experiment in several ways:

Concentration changes: As water evaporates, the concentration of the solute in the remaining solution increases. This can affect the rate of reaction, as the concentration of the reactants is a key factor in determining the rate. Similarly, as CO2 dissolves in the water, the concentration of dissolved CO2 increases, which can affect the pH of the solution.

Mass changes: As water evaporates, the mass of the solution decreases. This can affect the accuracy of the results, as the mass is often used to calculate the amount of product formed.

Temperature changes: Evaporation is an endothermic process, meaning that it requires energy in the form of heat. As a result, the temperature of the solution may decrease during the reaction, which can affect the rate of the reaction.

Overall, the effects of water evaporation and CO2 dissolution will depend on the specific conditions of the experiment, including the starting concentrations of the reactants and the rate of evaporation. In general, these factors can affect the accuracy and precision of the results, and must be carefully controlled or accounted for in order to obtain reliable data.

To know more about evaporation refer to-

https://brainly.com/question/5019199

#SPJ11

At STP, 27.8 liters of H2O gas are produced when 7.25 liters of C3H8 are burned .

When 7.25 liters of C3H8 are burned at STP, according to the balanced chemical equation, 4 moles of H2O gas are produced for every 1 mole of C3H8.

First, we need to determine the number of moles of C3H8 in 7.25 liters. We can use the ideal gas law:

PV = nRT

Where P = pressure (STP = 1 atm), V = volume (7.25 L), n = number of moles, R = gas constant (0.0821 L atm/mol K), and T = temperature (STP = 273 K).

Solving for n:

n = PV/RT
n = (1 atm)(7.25 L)/(0.0821 L atm/mol K)(273 K)
n = 0.296 moles

Now we can use the mole ratio from the balanced equation to determine the number of moles of H2O produced:

1 mole C3H8 : 4 moles H2O

0.296 moles C3H8 x (4 moles H2O/1 mole C3H8) = 1.184 moles H2O

Finally, we can convert moles of H2O to liters of gas at STP using the same ideal gas law:

n = PV/RT

V = nRT/P
V = (1.184 mol)(0.0821 L atm/mol K)(273 K)/(1 atm)
V = 27.8 L

Therefore, 27.8 liters of H2O gas are produced when 7.25 liters of C3H8 are burned at STP.

Know more about Ideal Gas Law here:

https://brainly.com/question/4147359

#SPJ11

6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To determine how many moles of carbon dioxide are produced when 6.00 moles of methane are used, we need to look at the balanced chemical equation: CH4 + 2O2 -> CO2 + 2H2O.

First, we can observe that 1 mole of methane (CH4) reacts with 2 moles of oxygen (O2) to produce 1 mole of carbon dioxide (CO2) and 2 moles of water (H2O). This means that the mole ratio of methane to carbon dioxide is 1:1.

Since we have 6.00 moles of methane, we can use the mole ratio to find the number of moles of carbon dioxide produced.


1. Identify the mole ratio of methane to carbon dioxide from the balanced chemical equation (1:1).
2. Multiply the given moles of methane (6.00 moles) by the mole ratio to find the moles of carbon dioxide.

Calculation:
6.00 moles CH4 × (1 mole CO2 / 1 mole CH4) = 6.00 moles CO2

So, 6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To know more about carbon dioxide, visit:

https://brainly.com/question/3049557#

#SPJ11

The molarity of the NaOH solution is 1.2 M.

To calculate the molarity of the NaOH solution, first determine the moles of H₂SO₄, then determine the moles of NaOH needed for neutralization, and finally, calculate the molarity of NaOH. Here's a step-by-step explanation:

1. Calculate moles of H₂SO₄: Moles = Molarity × Volume = 1.5 M × 0.040 L = 0.060 moles H₂SO₄

2. Determine moles of NaOH needed for neutralization:

The balanced equation for the reaction is H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O. Based on the stoichiometry, 1 mole of H₂SO₄ reacts with 2 moles of NaOH, so 0.060 moles H₂SO₄ × 2 = 0.120 moles NaOH needed.

3. Calculate molarity of NaOH: Molarity = Moles / Volume = 0.120 moles NaOH / 0.025 L = 1.2 M NaOH solution.

To know more about balanced equation click on below link:

https://brainly.com/question/7181548#

#SPJ11

(a) [tex]CH_{3} OH[/tex]: 3 moles

(b) [tex]CH_{2} =CHCH_{3}[/tex] : 6 moles

(c) [tex]CH_{3} OCH_{3}[/tex] : 5 moles

(d) CH=CH: 3 moles

The number of moles of oxygen required for the complete combustion of different compounds can be calculated by writing the balanced chemical equation for the combustion reaction.

For example, the combustion of methanol ([tex]CH_{3} OH[/tex]) requires 3 moles of oxygen for every 2 moles of [tex]CH_{3} OH[/tex]. Similarly, the combustion of 1-butene ([tex]CH_{2} =CHCH_{3}[/tex]) requires 6 moles of oxygen for every 1 mole of [tex]CH_{2} =CHCH_{3}[/tex]. The combustion of dimethyl ether ([tex]CH_{3} OCH_{3}[/tex]) requires 5 moles of oxygen for every 2 moles of [tex]CH_{3} OCH_{3}[/tex].

The combustion of ethene ([tex]CH_{2}=CH_{2}[/tex]) requires 3 moles of oxygen for every 1 mole of CH=CH. Knowing the required amount of oxygen is important to calculate the stoichiometry of a reaction and the efficiency of combustion reactions.

To learn more about combustion, refer:

https://brainly.com/question/32079208

#SPJ1

Answer: C. Gas

Explanation:

A gas is a state of matter that has no definite shape or volume, and its particles are usually far apart and moving quickly in random directions.

First, let's determine the moles of aniline in the initial 68.3 mL of 0.3400 M solution:

moles of aniline = 0.3400 mol/L × 0.0683 L = 0.02326 mol

Next, let's determine the moles of HIO3 added to the solution:

moles of HIO3 = 0.6100 mol/L × 0.0421 L = 0.02568 mol

Since HIO3 is a strong acid, it will completely react with aniline to form its conjugate acid, C6H5NH3+, and iodate ion, IO3-. This reaction can be represented as:

C6H5NH2 + HIO3 → C6H5NH3+ + IO3-

The moles of aniline that have reacted with HIO3 can be calculated as the difference between the initial moles of aniline and the moles of HIO3 added:

moles of aniline reacted = 0.02326 mol - 0.02568 mol = -0.00242 mol

Since the reaction goes to completion, the moles of C6H5NH3+ formed will be equal to the moles of HIO3 added, which is 0.02568 mol.

To calculate the concentration of C6H5NH3+ in the final solution, we need to divide the moles of C6H5NH3+ by the total volume of the solution:

final volume = 68.3 mL + 42.1 mL = 110.4 mL = 0.1104 L

[C6H5NH3+] = moles of C6H5NH3+ / final volume

[C6H5NH3+] = 0.02568 mol / 0.1104 L = 0.2329 M

To calculate the pH of the final solution, we need to first calculate the pKa of the C6H5NH3+ / C6H5NH2 conjugate acid-base pair:

pKa = pKb + log([H3O+]/[C6H5NH2])

At equilibrium, the concentration of C6H5NH3+ will be equal to the concentration of C6H5NH2, so we can simplify the equation:

pKa = pKb + log([H3O+]/[C6H5NH3+])

pKb = 9.37 (given)

Since the solution is acidic, we can assume that [H3O+] << [C6H5NH3+], so we can neglect the contribution of [H3O+] to the pH:

pH = pKa + log([C6H5NH2]/[C6H5NH3+])

pH = 9.37 + log(0.2329/0.02568)

pH = 9.37 + 1.662

pH = 11.03

Therefore, the pH of the final solution is 11.03.

To know more about aniline refer here

https://brainly.com/question/31081529#

#SPJ11

The material has decayed to 37.2% of the original amount after 90 days (with an additional 45 days after decaying 55.1%).

The amount of radioactive material remaining after time t can be calculated using the formula:

[tex]N(t) = N0 * (1/2)^(t/T)[/tex]

where N0 is the initial amount, t is the time elapsed, and T is the half-life of the radioactive material.

In this problem, the initial amount of radioactive material has decayed by 55.1% after 45 days. This means that:

[tex]N(45) = N0 * (1 - 0.551) = 0.449 * N0[/tex]

After an additional 45 days, the total time elapsed is now 90 days. We can use the same formula to calculate the amount of radioactive material remaining after 90 days:

[tex]N(90) = N0 * (1/2)^(90/T)[/tex]

We can then use the two equations to solve for the percentage of the original amount that has decayed after 90 days:

[tex]N(90) = 0.449 * N0 * (1/2)^(90/T)0.449 = (1/2)^(45/T)[/tex]

Taking the natural logarithm of both sides:

[tex]ln(0.449) = ln(1/2)^(45/T)[/tex]

ln(0.449) = -(45/T) * ln(2)

T = -(45/ln(2)) * ln(0.449) = 86.5 days (to the nearest tenth)

Now that we know the half-life of the material, we can use the original formula to calculate the amount of material remaining after 90 days:

[tex]N(90) = N0 * (1/2)^(90/86.5) = 0.372 * N0[/tex]

Therefore, the material has decayed to 37.2% of the original amount after 90 days (with an additional 45 days after decaying 55.1%).

To know more about radioactive material refer to-

https://brainly.com/question/3542572

#SPJ11

There has been extensive research on how learning works across many different academic fields.

Thus,  Basic studies of the brain mechanisms underlying learning in humans and other species have traditionally been conducted in the fields of neurology and biology and learning.

Studies of how the human mind "computes," creating and applying knowledge, have typically been conducted in the fields of cognitive science and psychology and academic fields.

Studies of how machines (such as computers and robots) learn have typically been conducted in the fields of computer science and other branches of engineering; and studies of how learning occurs in the learning.

Thus, There has been extensive research on how learning works across many different academic fields.

Learn more about learning, refer to the link:

https://brainly.com/question/1503472

#SPJ1

If an electron is released during radioactive decay, the type of decay that has taken place is beta decay.

In beta decay, a neutron within the nucleus is converted into a proton, releasing an electron (also called a beta particle) in the process.

In alpha decay an alpha particle is emitted from the atomic nucleus and a new atomic nucleus is formed. So, no release of electron is there.

In gamma decay the unstable nuclei release excess energy by continuous electromagnetic process. This does not involve release of electron.

The electromagnetic decay also do not involve the release of an electron.

Thus option b is the correct answer.

To know more about beta decay visit:

https://brainly.com/question/27770519

#SPJ11

The number of mole of the remaining reactants and products are

We must recognize that reactants are located on the left side of a chemical equation while the products are located on the right side.

With the above information in mind, we shall determine the mole of the reactants and products. This is illustrated below:

4NH₃(g) + 3O₂(g) → 2N₂(g) + 6H₂O(l)

Reactants:

Products

Thus, the moles of the remaining reactants and products are:

Learn more about mole:

https://brainly.com/question/18265914

#SPJ1

On Acids and Bases:

1. pH = -log[H⁺] = -log(1 x 10⁽⁻³⁾) = 3

2. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁸⁾) = 8

3. [H+] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻¹³⁾) = 0.1 M

pH = -log[H⁺] = -log(0.1) = 1

4. pOH = -log[OH⁻] = -log(1 x 10⁽⁻⁹⁾) = 9

pH + pOH = 14

pH = 14 - pOH = 14 - 9 = 5

5. [H⁺] = 10^(-pH) = 10⁽⁻³⁾ M

6. [OH⁻] = 10^(-pOH) = 10⁽⁻²⁾ M

7. [H⁺] = 10^(-pOH) = 10⁽⁻¹³⁾ M

8. [OH⁻] = 10^(-pH) = 10⁽⁻⁴⁾ M

9. [OH⁻][H⁺] = 1 x 10⁽⁻¹⁴⁾

[OH⁻] = 1 x 10⁽⁻¹⁴⁾/[H+] = 1 x 10⁽⁻¹⁴⁾)/(1 x 10⁽⁻⁴⁾) = 1 x 10⁽⁻¹⁰⁾ M

10. [H⁺][OH⁻] = 1 x 10⁽⁻¹⁴⁾

[H⁺] = 1 x 10⁽⁻¹⁴⁾/[OH-] = 1 x 10⁽⁻¹⁴⁾/(1 x 10⁽⁻²⁾) = 1 x 10⁽⁻¹²⁾ M

11. pH + pOH = 14

pOH = 14 - pH = 14 - 6 = 8

12. pH + pOH = 14

pH = 14 - pOH = 14 - 12 = 2

13. pH < 7, so the solution is acidic.

14. pOH < 7, so the solution is basic.

15. An indicator is a substance that changes color depending on the pH of the solution.

16. According to the Bronsted-Lowery theory, an acid is a substance that donates a proton (H⁺) and a base is a substance that accepts a proton (H⁺).

Find out more on Acids and Bases here: https://brainly.com/question/9836972

#SPJ1

To expand a flattened plastic bag, one can increase the number of particles inside the bag, increase the temperature or speed of particles, increase the pressure or number of collisions of particles inside the bag, or increase the available volume or space inside the bag.

When the number of particles inside the bag is increased, the bag expands due to the increased amount of matter pushing against the inner surface of the bag. As temperature or speed of particles increases, their kinetic energy increases, causing them to collide with the inner surface of the bag with greater force and frequency, which leads to the expansion of the bag.

When the number of particles or their pressure inside the bag is increased, they collide with the inner surface of the bag with greater force, leading to the expansion of the bag. Increasing volume can be achieved by stretching the bag or pulling on it in different directions, which increases the distance between the particles inside the bag and allows them to occupy a greater volume of space.

To learn more about temperature follow the link:

brainly.com/question/14633960

#SPJ4

The range of dilution factors that are needed to set up a successful BOD5 test for this wastewater sample is between 18 and 20.

What is Dilution?

Dilution is the process of adding solvent to a solution to decrease the concentration of solutes within the solution. In this process, the volume of the solution increases while the total amount of solute remains constant.

BOD5 = (Initial DO - Final DO) x Dilution Factor

180 mg/L = (Initial DO - 2 mg/L) x Dilution Factor

Initial DO = 180 mg/L / Dilution Factor + 2 mg/L

We want the initial DO to be between 6 and 8 mg/L, so:

6 mg/L ≤ 180 mg/L / Dilution Factor + 2 mg/L ≤ 8 mg/L

Subtracting 2 mg/L from all parts of the inequality, we get:

4 mg/L ≤ 180 mg/L / Dilution Factor ≤ 6 mg/L

Multiplying all parts by Dilution Factor, we get:

720 mg/L ≤ 180 / Dilution Factor x Dilution Factor ≤ 1080 mg/L

Simplifying, we get:

720 mg/L ≤ 180 x 5 / BOD5 ≤ 1080 mg/L

Dividing by 180 and multiplying by 5, we get:

20 ≤ 5 / BOD5 ≤ 30

Inverting the inequality, we get:

1/30 ≤ BOD5/5 ≤ 1/20

Simplifying, we get:

0.0333 ≤ BOD5/5 ≤ 0.05

Therefore, the range of dilution factors needed to set up a successful BOD5 test for this sample is between 20 and 30.

To know more about Dilution, visit;

https://brainly.com/question/27097060

#SPJ4

The major organic product for the reaction between hydrogen chloride (HCl) and aluminum chloride [tex](AlCl_3)[/tex] is aluminum chloride  [tex](AlCl_3)[/tex].

When hydrogen chloride (HCl) reacts with aluminum chloride [tex](AlCl_3)[/tex], the reaction is exothermic and produces aluminum chloride  [tex](AlCl_3)[/tex] as the major product. Hydrogen chloride (HCl) is a strong acid that dissociates fully in water, releasing chloride ions (Cl-). Aluminum chloride  [tex](AlCl_3)[/tex] is a strong base that reacts with hydrogen chloride (HCl) to form aluminum hydroxide [tex](AlCl_3)[/tex] and hydrochloric acid (HCl). The ratio of starting material to reagent is one to one.

The balanced equation for the reaction between hydrogen chloride (HCl) and aluminum chloride  [tex](AlCl_3)[/tex] is:

HCl +  [tex](AlCl_3)[/tex]  → [tex]Al(OH)_3[/tex] + HCl

Therefore, the major organic product for this reaction is aluminum hydroxide  [tex]Al(OH)_3[/tex], which is an inorganic compound.  

Learn more about major product Visit: brainly.com/question/29666831

#SPJ4

The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. To calculate the molarity of the NaOH solution, we need to divide the number of moles of NaOH by the volume of the solution in liters.

Given that 15 moles of NaOH are dissolved in 2.0 L of solution, the molarity (M) of the solution can be calculated as:

M = number of moles of solute / volume of solution in liters

M = 15 moles / 2.0 L

M = 7.5 M

Therefore, the molarity of the NaOH solution is 7.5 M.

To know more about molarity refer here

https://brainly.com/question/31545539#

#SPJ11

The probability of Benjamin Stacey's children inheriting methemoglobinemia from a woman affected by the condition depends on her genotype.

If she is homozygous recessive (rr), all of their children will have methemoglobinemia.

If she is heterozygous (Rr), there is a 50% chance of each child inheriting the mutated gene and developing methemoglobinemia.

Part A:

Since Benjamin's mother has a heterozygous genotype (Rr) for methemoglobinemia and neither of his siblings showed signs of the condition, we can infer that his father must have a normal genotype (RR) for the methemoglobinemia gene.

The possible genotypes for Benjamin's three siblings are:

Rr (heterozygous carriers)

RR (normal)

rr (affected by methemoglobinemia)

This is because each sibling inherits one gene from each parent, and there is a 50% chance that they will inherit the normal gene (R) from their father and a 50% chance that they will inherit the mutated gene (r) from their mother.

Part B:

If Benjamin Stacey were to marry and have children with a woman affected by methemoglobinemia, the probability of their children inheriting this condition depends on the genotype of the woman.

If the woman is homozygous recessive (rr) for the methemoglobinemia gene, then all of their children will inherit one mutated gene (r) from Benjamin and one mutated gene (r) from the woman, resulting in an rr genotype and the development of methemoglobinemia.

The probability of each child having methemoglobinemia would be 100%.

If the woman is heterozygous (Rr) for the methemoglobinemia gene, then there is a 50% chance that each child will inherit one normal gene (R) from Benjamin and one mutated gene (r) from the woman, resulting in a heterozygous genotype (Rr) and carrier status.

There is also a 50% chance that each child will inherit two mutated genes (rr) and develop methemoglobinemia. The probability of each child having methemoglobinemia would be 50%.

to know more about methemoglobinemia refer here:

https://brainly.com/question/21994048#

#SPJ11

According to the question the two results of the uneven heating of Earth's surface are ocean currents and global winds.

Currents are electrical energy that flows through a circuit. They are typically measured in amperes (amps), and they result from the flow of electrons through the circuit. Currents can be either direct or alternating, and they are used to power many electrical appliances and power systems. Direct currents are generated from sources such as batteries, while alternating currents are produced by generators and power plants. Currents can also be generated artificially, using devices such as transformers, or naturally, through processes such as lightning. The magnitude of currents depends on the voltage and resistance of the circuit. Currents can be used to control the operation of many electrical circuits and components, such as motors, relays, and switches. They can also be used to provide power for many electrical devices, including lights, computers, and other electronic equipment.

To learn more about currents

https://brainly.com/question/31593608

#SPJ4

Yes, it is possible to make an aqueous solution of strontium hydroxide that gives a pOH of 10.54 because of thr Sr ions in the solution.

First, we can use the relationship between pH and pOH,

pH + pOH = 14

Since we want a pOH of 10.54, we can solve for the pH,

pH = 14 - pOH

pH = 14 - 10.54

pH = 3.46

Next, we can use the ionization constant expression for strontium hydroxide,

Sr(OH)₂(s) → Sr²⁺(aq) + 2OH⁻(aq)

Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴

Hence, the concentration will be given as,

[OH⁻] = 2[Sr²⁺]

Substituting this expression into the Kw expression, we get,

Kw = [H⁺][OH⁻] = [H⁺] (2[Sr²⁺])

1.0 x 10⁻¹⁴ = [H⁺] (2x)

where x is the molar concentration of strontium ions.

Solving for x, we get,

x = 1.0 x 10⁻¹⁴ / 2

x = 5.0 x 10⁻¹⁵

Therefore, the molar concentration of strontium ions in solution is 5.0 x 10⁻¹⁵ M.

To know more about pOH value, visit,

https://brainly.com/question/22664380

#SPJ1

the pH of the solution is 8.95.

To calculate the pH of the solution, we need to determine the concentration of hydroxide ions (OH-) and then use the equation:

pH = 14 - pOH

The first step is to write the equation for the ionization of ammonium chloride in water:

NH4Cl → NH4+ + Cl-

The ammonium ion (NH4+) will react with water to produce ammonium hydroxide (NH4OH) and a hydrogen ion (H+):

NH4+ + H2O → NH4OH + H+

Next, we can write an equilibrium expression for the reaction of ammonium hydroxide with water:

NH4OH + H2O ⇌ NH4+ + OH-

The equilibrium constant for this reaction is called the base dissociation constant (Kb) for ammonium hydroxide, and it has a value of 1.8×10^-5 at 25°C. We can use this value to calculate the concentration of hydroxide ions in the solution:

Kb = [NH4+][OH-]/[NH4OH]

1.8×10^-5 = [0.10][OH-]/[0.20]

[OH-] = 9.0×10^-6 M

Now we can calculate the pOH of the solution:

pOH = -log[OH-] = -log(9.0×10^-6) = 5.05

Finally, we can calculate the pH of the solution:

pH = 14 - pOH = 14 - 5.05 = 8.95

Therefore, the pH of the solution is 8.95.
Visit to know more about pH:-

https://brainly.com/question/172153

#SPJ11

Answer:

Explanation:

The correct answer is A.2,1,1,1 ;

As Our balancing equation is totally a Mathematics calculation In which We have to make coefficients in a manner to have all the atoms got equal on both side of the reactants.

We do balancing for Conservation of Mass.

Read More:

brainly.com/balanceequation

A helium filled balloon has a volume of 50. 0L at 25⁰C and 1. 00 atm.  43.6 L will it have at 0. 855 atm and 10. 0⁰C.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula is:

[tex]\frac{{P_1V_1}}{{T_1}} = \frac{{P_2V_2}}{{T_2}}[/tex]

Where P1, V1, and T1 are the initial conditions, and P2, V2, and T2 are the final conditions. Plugging in the given values, we get:

[tex]\left(\frac{{1.00 , \text{atm} \cdot 50.0 , \text{L}}}{{298 , \text{K}}}\right) = \left(\frac{{0.855 , \text{atm} \cdot V2}}{{283 , \text{K}}}\right)[/tex]

Solving for V2, we get:

[tex]V2 = \frac{{1.00 , \text{atm} \cdot 50.0 , \text{L}}}{{298 , \text{K}}} \times \frac{{283 , \text{K}}}{{0.855 , \text{atm}}} = 43.6 , \text{L}[/tex]

Therefore, the helium-filled balloon will have a volume of 43.6 L at 0.855 atm and 10.0⁰C.

To know more about the gas law refer here :

https://brainly.com/question/12669509#

#SPJ11

The hydroxide ion concentration [OH⁻] of an HCl solution with a pH of 5.71 is 4.81 x 10^-9 M.

To find the hydroxide ion concentration [OH⁻] of an HCl solution with a pH of 5.71, we need to use the equation:

pH = -log[H⁺]

First, we need to solve for the [H⁺] concentration:

[H⁺] = 10^-pH

[H⁺] = 10^-5.71

[H⁺] = 2.08 x 10^-6 M

Since HCl is a strong acid and completely dissociates in water, the [H⁺] concentration is also the [Cl⁻] concentration.

Now, we can use the equation for the ion product constant of water:

Kw = [H⁺][OH⁻]

At 25°C, Kw = 1.0 x 10^-14.

We can rearrange the equation to solve for [OH⁻]:

[OH⁻] = Kw/[H⁺]

[OH⁻] = (1.0 x 10^-14)/(2.08 x 10^-6)

[OH⁻] = 4.81 x 10^-9 M

Learn more about hydroxide ions at https://brainly.com/question/28464162

#SPJ11

D) The sentence that best paraphrases the information about river otters is: "Otters are talented at constructing slides. These help them move through their environment with ease as they hunt for small sea life to eat."

River otters aresemi-aquatic mammals that are generally  set up in gutters, aqueducts, and other aqueducts. One of the most outstanding characteristics of these  creatures is their habit of  erecting slides. Otters  make slides by creating a path of  slush or snow on a steep  pitch leading to the water.

This helps them to move through their  terrain with ease and quest for small  ocean life,  similar as crayfish and small amphibians, which are their primary sources of food.   Otters are known for their  sportful nature and can  frequently be seen sliding down their constructed slides  constantly,  putatively just for the fun of it. still, these slides serve a practical purpose as well. By  erecting their own slides, otters can avoid rocky or  else dangerous areas of the swash bank and safely  pierce the water.

Learn more about river otters at

https://brainly.com/question/29218263

#SPJ1

Both mass and charge are conserved. Therefore, option (3) is correct.

Fe(s) + CuSO₄(aq) → FeSO₄(aq) + Cu(s) conserves mass and charge.

The rule of conservation of mass prohibits matter creation or destruction during chemical reactions. The reactants and products must have the same mass. The left and right sides of the reaction must have the same mass of iron (Fe) and copper sulfate (CuSO₄).

Redox processes also involve electron transfer. The law of charge conservation asserts that reactants and products must have equal charges. Iron loses electrons to generate Fe²⁺ ions, while copper ions receive electrons to form copper metal (Cu). The reaction is neutral.

Learn more about redox reaction, here:

https://brainly.com/question/28300253

#SPJ12

It is likely that the jewels are hidden in the tank with salt residue on their sides.

The presence of the electric wires in both tanks suggests that the thief has set up a security system to protect the treasure chests.

The purpose of the salt in the right tank is likely to act as a conductor, completing an electric circuit if someone were to touch the chest or the wires. This would trigger an electric shock and serve as a deterrent to potential thieves.

Since the thief is unlikely to have set up the security system in the tank without the jewels, the lack of salt in the left tank suggests that it is a decoy, intended to mislead potential thieves.

Therefore, the tank with the salt residue is the more likely hiding place for the jewels.

More on electrolysis can be found here: https://brainly.com/question/31726896

#SPJ1

The color of methyl orange in a 1.2 M solution of KOH would be yellow.

Methyl orange is a pH indicator that is often used in titration due to its distinct and visible color variation at various pH levels.

At pH 5 or higher, methyl orange turns yellow. Strong bases totally dissolve into K+ and OH- ions in solution while KOH at 1.2 M will do the same. Since KOH is a powerful base, its solution pH will be higher than 7 (neutral).

Therefore, the color of methyl orange in a 1.2 M solution of KOH would be yellow.

Learn more about Methyl orange here : brainly.com/question/30104531

#SPJ1

The pH of the solution prepared by mixing 30.00 ml of 0.10 M CH3CO2H with 30.00 ml of 0.030 M CH3CO2K is 4.22.

To determine the pH of the solution prepared by mixing 30.00 ml of 0.10 M CH3CO2H with 30.00 ml of 0.030 M CH3CO2K, we first need to calculate the concentration of CH3CO2H and CH3CO2K in the final solution.

Since the volumes are additive, the total volume of the solution is 60.00 ml. The moles of CH3CO2H present in the solution can be calculated as follows:

Moles of CH3CO2H = concentration (M) x volume (L)
Moles of CH3CO2H = 0.10 M x 0.030 L
Moles of CH3CO2H = 0.003 moles

Similarly, the moles of CH3CO2K present in the solution can be calculated as:

Moles of CH3CO2K = concentration (M) x volume (L)
Moles of CH3CO2K = 0.030 M x 0.030 L
Moles of CH3CO2K = 0.0009 moles

Since CH3CO2H and CH3CO2K react with each other to form a buffer solution, we can use the Henderson-Hasselbalch equation to calculate the pH of the solution:

pH = pKa + log ([CH3CO2K] / [CH3CO2H])

where pKa is the dissociation constant of CH3CO2H (1.8 x 10–5).

Substituting the values of moles of CH3CO2H and CH3CO2K, we get:

pH = pKa + log ([0.0009] / [0.003])
pH = 4.74 + log (0.3)
pH = 4.74 - 0.52
pH = 4.22

Therefore, the pH of the solution prepared by mixing 30.00 ml of 0.10 M CH3CO2H with 30.00 ml of 0.030 M CH3CO2K is 4.22.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The freezing point depression (ΔTf) of a solvent is related to the molality of the solution by the equation:

ΔTf = Kf × molality

where Kf is the freezing point depression constant for the solvent.

For water, Kf is 1.86 °C/m.

(a) If the freezing point of the water solution is -9.3°C, then the freezing point depression is:

ΔTf = 0°C - (-9.3°C) = 9.3°C

Using the equation above and the value of Kf for water, we can solve for the molality of the solution:

9.3°C = 1.86 °C/m × molality

molality = 9.3°C / 1.86 °C/m = 5.00 m

Therefore, the molality of the water solution is 5.00 m.

(b) If the freezing point of the water solution is -27.9°C, then the freezing point depression is:

ΔTf = 0°C - (-27.9°C) = 27.9°C

Using the equation above and the value of Kf for water, we can solve for the molality of the solution:

27.9°C = 1.86 °C/m × molality

molality = 27.9°C / 1.86 °C/m = 15.0 m

Therefore, the molality of the water solution is 15.0 m.

To know more about depression refer here

https://brainly.com/question/28810167#

#SPJ11

I would expect a C24 molecule to boil at a higher temperature than a C8 molecule.

The boiling point of a molecule depends on the strength of intermolecular forces between the individual molecules. Intermolecular forces are forces that exist between molecules and they include dipole-dipole forces, hydrogen bonding, London dispersion forces, and ion-dipole forces.

This is because the boiling point of a molecule is directly related to its size and the strength of its intermolecular forces. A larger molecule such as C24 has more electrons and a larger surface area, which results in stronger intermolecular forces such as London dispersion forces.

These stronger forces require more energy to be overcome and thus result in a higher boiling point. In contrast, a smaller molecule such as C8 has weaker intermolecular forces and requires less energy to overcome them, resulting in a lower boiling point.

Read more about temperature  here:

https://brainly.com/question/25677592

#SPJ1