I am wondering how to solve these

Answer:

Explanation:

Hydrochloric acid (HCl) is a binary acid composed of hydrogen and chlorine. The molar mass of hydrochloric acid can be calculated by adding the atomic weights of hydrogen and chlorine.

The atomic weight of hydrogen is 1.008 g/mol, and the atomic weight of chlorine is 35.45 g/mol. Therefore, the molar mass of hydrochloric acid (HCl) is:

Molar mass of HCl = 1 x atomic weight of hydrogen + 1 x atomic weight of chlorine

bash

= 1 x 1.008 g/mol + 1 x 35.45 g/mol

= 36.46 g/mol

Therefore, the molar mass of hydrochloric acid (HCl) is 36.46 g/mol.

The product of the hydrolysis of pentanamide with hcl are pentanoic acid and ammonium chloride, so correct answer would be Option C&D.

In chemistry and biology, hydrolysis refers to a double decomposition reaction in which water participates. Therefore, the hydrolysis reaction may be represented by the reversible chemical equation AB + HOH ⇌ AH + BOH, if a compound is represented by the formula AB in which A and B are atoms or groups and water is represented by the formula HOH. Other than water, the reactants in a hydrolysis reaction can be neutral molecules, as they are in the majority of cases when organic compounds are involved, or ionic molecules, as they are in the cases of salts, acids, and bases.

Visit here to learn more about the hydrolysis: https://brainly.com/question/10840252

#SPJ4

A chemical reaction in which one element replaces another element in a chemical compound is called a "single displacement reaction" or "single replacement reaction".

A chemical reaction in which two or more substances combine to form a new, more complex substance is called a "combination reaction" or "synthesis reaction".

A chemical reaction in which a substance reacts with oxygen to produce thermal and light energy as well as carbon dioxide and water vapor is called a "combustion reaction".

A chemical reaction in which the positive ion on one compound replaces the positive ion of another compound is called a "double displacement reaction" or "double replacement reaction".

A chemical reaction in which one substance breaks down into two or more simpler substances is called a "decomposition reaction".

The Balanced Chemical Equations:

b. 2NaOH + MgSO4 → Na2SO4 + Mg(OH)2

c. 2 Fe2O3 + 6 H2O → 4 Fe(OH)3

d. 2 HgO → 2 Hg + O2

a. 3 Pb(NO3)2 + 2 AlCl3 → 3 PbCl2 + 2 Al(NO3)3

e. 2 C2H6 → 4 CO + 6 H2O

Read more about chemical reaction here:

https://brainly.com/question/11231920

#SPJ1

See transcribed text below

Fill  Column A with the right term from Column B  

Column A

a.

b

C.

d.

e.

Column B

A chemical reaction in which one element replaces another element in a chemical compound.

A chemical reaction in which two or more substances combine to form a new, more complex substance.

A chemical reaction in which a substance reacts with oxygen to produce thermal and light energy as well as carbon dioxide and water vapor.

A chemical reaction in which the positive ion on one compound replaces the positive ion of another compound.

A chemical reaction in which one substance breaks down into two or more simpler substances.

SECTION B: SKILLS

4. Examine each unbalanced chemical equation and classify it by writing the type of reaction it is on the left. Then, balanced each equation. Draw a chemical reaction beside the test title. (3 points each. 15 points total)

Type of Reaction

Unbalanced Chemical Equation - Balance It!

b.

C.

d.

out of

27

Al

+

Oz

2022 2Aho

2NaOH

+

MgSO4

Na2SO4

Y Mg(OH)2

2-Hgo → 2 Hg +

Liet 6H02 y Fe +

2 Fe2O3 + 12H2

O2

C2H6

+ / 02 2

2c02 +

H2O

Answer:

The molecular formula of butanedione = C4 h6 O2

Answer:

1. The molar mass of copper is 63.55 g/mol. To find the number of moles of copper in 5.00 grams, we divide the given mass by the molar mass:

5.00 g Cu / (63.55 g/mol Cu) = 0.0787 mol Cu

Therefore, there are 0.0787 moles of copper in 5.00 grams of copper wire.

2. The molar mass of glycine (C2H5O2N) is:

12.01 g/mol (C) + 1.01 g/mol (H) x 5 + 16.00 g/mol (O) x 2 + 14.01 g/mol (N) = 75.07 g/mol

To find the number of moles of glycine in 28.35 grams, we divide the given mass by the molar mass:

28.35 g glycine / (75.07 g/mol glycine) = 0.377 mol glycine

Therefore, there are 0.377 moles of glycine molecules in 28.35 grams of glycine.

3. a. To find the mass of 1.42 x 10^-4 mol of vitamin C, we multiply the molar mass of vitamin C (176.12 g/mol) by the number of moles:

1.42 x 10^-4 mol x 176.12 g/mol = 0.0248 g

Therefore, the mass of the recommended daily dietary allowance of vitamin C for children aged 4-8 years is 0.0248 grams.

b. The molecular formula of vitamin C is C6H8O6, so there are 6 moles of carbon for every mole of vitamin C. Therefore, there are:

1.42 x 10^-4 mol x 6 = 8.52 x 10^-4 mol of carbon

in 1.42 x 10^-4 mol of C6H8O6.

4. To rank the following from lowest number of particles to highest, we need to compare the number of particles in each of the given amounts.

2.3 mol H2O: 2.3 mol x 6.022 x 10^23 molecules/mol = 1.39 x 10^24 molecules of H2O

3.5 mol H2: 3.5 mol x 6.022 x 10^23 molecules/mol = 2.11 x 10^24 molecules of H2

0.50 mol C100H202: 0.50 mol x 6.022 x 10^23 molecules/mol = 3.01 x 10^23 molecules of C100H202

Therefore, the ranking from lowest to highest number of particles is:

0.50 mol C100H202 < 2.3 mol H2O < 3.5 mol H2.

The reasoning is based on the Avogadro's number which represents the number of particles in one mole of a substance, which is equal to 6.022 x 10^23. The substance with the smallest number of moles has the smallest number of particles, and the substance with the largest number of moles has the largest number of particles.

Answer: 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.

Explanation:

The chemical equation for the reaction between copper and silver nitrate is:

Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag

From this equation, we can see that 1 mole of copper reacts with 2 moles of silver nitrate.

To find how many moles of copper are required to replace silver from 4.0 moles of silver nitrate, we need to use the mole ratio between copper and silver nitrate.

1 mole of copper reacts with 2 moles of silver nitrate, so:

1 mole Cu / 2 moles AgNO3

To calculate how many moles of copper are needed to replace 4.0 moles of silver nitrate, we can use the mole ratio as follows:

4.0 moles AgNO3 x (1 mole Cu / 2 moles AgNO3) = 2.0 moles Cu

Therefore, 2.0 moles of copper are required to replace silver from 4.0 moles of silver nitrate.

Answer:2.00 moles Cu

Explanation:4.0mol AgNO3 x 1 mol cu

/ 2 mol Ag NO3

The pressure of [tex]N_2[/tex] under the given conditions is 8.53 atm

We may use the Ideal Gas Law equation to calculate the pressure of [tex]N_2[/tex]under the following conditions:

PV = nRT

where P denotes pressure, V denotes volume, n is the number of moles of gas, R denotes the gas constant, and T denotes temperature in Kelvin.

To begin, we must convert the mass of [tex]N_2[/tex] to moles. We may use the molar mass of [tex]N_2[/tex] (28.02 g/mol):

49.1 g [tex]N_2[/tex] x (1 mol N2/28.02 g [tex]N_2[/tex] ) = 1.75 mol [tex]N_2[/tex]

The temperature must then be converted from Celsius to Kelvin:

16.6°C + 273.15 = 289.75 K

Plugging the data into the equation :

P = nRT/V

P = (1.75 mol)(0.0821 mol/molK)(289.75 K)/ (5.80 L)

P = 8.53 atm

Therefore, the pressure of [tex]N_2[/tex] is 8.53 atm

For more such questions on pressure, click on:

https://brainly.com/question/25736513

#SPJ11

The total number of atoms for each element in a chemical equation that is balanced is the same on both sides of the equation.

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.

For the chemical equation to adhere to the rule of conservation of mass, it must be balanced. A chemical equation is said to be balanced when the number of various elemental atoms on the reactants and products sides are equal.

To learn more about balanced equations visit:

brainly.com/question/2399130

#SPJ1

the solution is 52.3 g (rounded to two decimal places).

We need to know the mass of the iron and sulphur in order to solve for the amount of sulphur involved. 95 grammes make up the iron's bulk. There are 16 grammes of sulphur in total. Hence, 32 grammes of sulphur are used in this reaction.

The correct answer is:

8Fe + S8 → 8FeS

The molar mass of sulfur is 256 g/mol (8 × 32 g/mol), and the molar mass of iron is 56 g/mol.

First, we need to convert the mass of sulfur to moles:

sulphur mass divided by its molar mass yields moles of sulphur.

moles of sulfur = 30.0 g / 256 g/mol

moles of sulfur = 0.1172 mol

According to the balanced equation, 1 mole of sulfur reacts with 8 moles of iron. Therefore, the moles of iron required can be calculated as:

moles of iron = 8 × moles of sulfur

moles of iron = 8 × 0.1172 mol

moles of iron = 0.9376 mol

Finally, we can calculate the mass of iron required using the moles of iron and the molar mass of iron:

Iron's mass is equal to its molar mass and its moles.

mass of iron = 0.9376 mol × 56 g/mol

mass of iron = 52.46 g

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Gyroscope training is advantageous for astronauts because it improves their coordination, balance, and spatial orientation in a microgravity simulation. Also, it can enhance their capacity for jobs in space and help them become less prone to motion sickness.

Gyroscopes in spacecraft alert the onboard computer when the craft has changed orientation (direction and pointing). The stabilising system for the spaceship receives the data from the computer after that.

To become a fully qualified astronaut, you may need to complete up to two years of training. The International Space Station and the Space Shuttle must be introduced to candidates.

To know more about coordination visit:-

https://brainly.com/question/27289242

#SPJ9

The position of this equilibrium will be well to the left because ethanolic acid is a weak acid: This gets a lot more ethanoate ions when sodium ethanoate is added to it.

The position of this equilibrium will be well to the left because ethanolic acid is a weak acid: Much more ethanoate ions are added when sodium ethanoate is added. That will shift the equilibrium's position even more to the left, in accordance with Le Chatelier's Principle.

Being a weaker acid or base, buffers act by neutralising any additional base (OH- ions) or acid (H+ ions) to preserve the moderate pH.

To know more about equilibrium visit:-

https://brainly.com/question/29359391

#SPJ1

It should be noted that to explain why the distribution of water storage traits changed over time, a model could employ various techniques from statistical analysis and machine learning.

One possible approach is as follows:

Data Collection: Gather data on water storage traits for a given population over a specific period. The data could include measurements of leaf water potential, stomatal conductance, osmotic adjustment, and other relevant traits.

Data Preprocessing: Clean the data, remove outliers, and normalize the data if necessary.

Exploratory Data Analysis: Conduct a visual and statistical analysis of the data to identify trends, patterns, and correlations. This could include scatterplots, histograms, boxplots, and correlation matrices.

Time-Series Analysis: Use time-series analysis techniques to investigate changes in the distribution of water storage traits over time. This could include fitting time-series models, decomposing the time series, and analyzing the autocorrelation and seasonality of the data.

Hypothesis Testing: Develop hypotheses about why the distribution of water storage traits changed over time, and test these hypotheses using statistical tests such as t-tests, ANOVA, and regression analysis.

Learn more about water on

https://brainly.com/question/1313076

#SPJ1

The products would be formed by these reactants. Because Mg is a more powerful reducing agent than  H₂, it can reduce H⁺ ions to form  H₂ gas.

Because it oxidizes magnesium to magnesium cations while being reduced, hydrochloric acid, the compound that delivers hydrogen ions to the reaction, acts as an oxidation agent.

When a reactant loses electrons during the reaction, this is referred to as oxidation. When a reactant gains electrons during the reaction, this is referred to as reduction. This is common when metals react with acid.

A half reaction is the component of a redox reaction that is either the oxidation or reduction reaction. By taking into account the change in oxidation states of the individual substances involved in the redox reaction, a half reaction is obtained.

Oxidation half-reaction: Mg(s) → Mg²⁺(aq) + 2e⁻

Reduction half-reaction: 2H⁺(aq) + 2e⁻ → H₂(g)

The balanced equation is:

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

To know more about the reduction half-reactions visit:

https://brainly.com/question/23332593

#SPJ1

We can help explain how to analyze histograms and interpret the information related to cell phone sales.

To analyze histograms, follow these steps:
1. Identify the horizontal axis (x-axis), which should represent the store's operating hours.
2. Identify the vertical axis (y-axis), which should represent the number of cell phone sales.
3. Observe the height of the bars in the histogram. Each bar represents the number of cell phone sales within a specific time interval during the store's operating hours.

To match the statements to the histograms, you should consider the following:
- Look for any patterns or trends in the data, such as higher sales during certain time periods.
- Compare the histograms to determine if there are noticeable differences between the three days.
- Identify any outlier data points or unusually high or low sales during specific time intervals.
Once you have analyzed the histograms, you can match the statements to the appropriate histogram by considering the trends and patterns you've observed.

For more questions on: cell

https://brainly.com/question/23725619

#SPJ11  

We need 117.76 mL volume of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.

What is volume?

To solve this problem, we can use the formula:

mass = molarity x volume x molar mass

where mass is the mass of the solute (in grams), molarity is the concentration of the solution (in moles per liter), volume is the volume of the solution (in liters), and molar mass is the mass of one mole of the solute (in grams per mole).

First, we need to calculate the molar mass of silver fluoride (AgF):

AgF = 1 x 107.87 + 1 x 18.998 = 126.868 g/mol

Next, we can rearrange the formula above to solve for volume:

volume = mass / (molarity x molar mass)

Substituting the given values:

volume = 17.8 g / (0.124 mol/L x 126.868 g/mol)

volume = 117.76 mL

Therefore, we need 117.76 mL of the aqueous solution of 0.124 M silver fluoride to obtain 17.8 grams of the salt.

To know more about molar mass, visit:

https://brainly.com/question/22997914

#SPJ1

Complete question is: 117.76 milliliters of an aqueous solution of 0.124 M silver fluoride is needed to obtain 17.8 grams of the salt.

Acid will be diluted by water, resulting in a reduction in the concentration of H+ ions. As a result, the solution's pH will rise.

The exothermic reaction that occurs when concentrated acid is mixed with water might result in burns due to the heat that is produced. On the other hand, when acid is gradually added to water while swirling continuously.

A basic solution's pH lowers and its hydroxide ion concentration decreases when water is added to it. The pH of the solution drops gradually toward 7 as additional water is added, and it gradually becomes less alkaline.

To know more about concentration visit:-

https://brainly.com/question/10725862

#SPJ1

Answer: True

Explanation: Physical Quantity which enables an object to do work is Energy. When an object does work, then its work done is only possible when the object has Kinetic Energy, Potential Energy or Both (Mechanical Energy) in it.

The correct answer is d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.

The pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water cannot be determined without additional information, such as the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor. These factors would need to be known in order to calculate the final pressure of the gas using the ideal gas law.

Therefore, it is important to have accurate experimental data and perform proper calculations to determine the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water.

To learn more about butane gas visit;

https://brainly.com/question/15123098

#SPJ4

Correct question:

What is the pressure of the butane gas in the Erlenmeyer flask after the addition of 40 mL of water in Experiment 2?

a) 1 atm

b) 2 atm

c) 3 atm

d) It depends on the initial pressure and temperature of the gas, volume of the flask, and partial pressure of water vapor.

B. A balanced chemical equation and the molar mass of all elements are needed in order to calculate the moles of Oxygen needed to react with 5g of Diethylzinc.

To calculate the moles of Oxygen needed to react with 5g of Diethylzinc, we need a balanced chemical equation and the molar mass of all elements involved. The balanced chemical equation will provide us with the stoichiometric ratio between Diethylzinc and Oxygen in the reaction, while the molar mass of Oxygen will allow us to convert the given mass of Diethylzinc into moles

Therefore, The balanced chemical equation will tell us the mole ratio of Diethylzinc and Oxygen, and the molar mass of Oxygen will be used to convert the given mass of Diethylzinc to moles.

Read more about Oxygen here:

https://brainly.com/question/26073928

#SPJ1

there are approximately 0.54 zeptomoles of air trapped inside the container with the movable piston.

To calculate the number of zeptomoles of air trapped inside the container with the movable piston, we first need to calculate the volume of the container.

Assuming the container is a rectangular prism with a length and height equal to the size of the graphene sheet (3 cm) and a width equal to the thickness of the spacer (15 nm), the volume of the container can be calculated as:

V = lwh = (3 cm)(3 cm)(15 nm) = 1.35 x 10^-5 cm^3

Next, we need to calculate the number of moles of air trapped inside the container. We can use the ideal gas law to do this:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

We know that the pressure inside the container is equal to atmospheric pressure, which is approximately 101325 Pa (or 1 atm). The temperature is not given, but we can assume it is room temperature, which is approximately 298 K. The ideal gas constant is 8.314 J/(mol*K).

Therefore, we can rearrange the ideal gas law to solve for n:

n = PV/RT

Substituting in the values we know:

n = (101325 Pa)(1.35 x 10^-5 cm^3)/(8.314 J/(mol*K) * 298 K)

n = 5.41 x 10^-28 mol

Finally, to convert this to zeptomoles, we multiply by 10^21:

n = 5.41 x 10^-7 zmol

Therefore, there are approximately 0.54 zeptomoles of air trapped inside the container with the movable piston.

To know more about zeptomoles, visit:  brainly.com/question/13435684

#SPJ4

The balanced chemical equation for the reaction between HI and RbOH is:

HI + RbOH → RbI + H2O

From the equation, we can see that 1 mole of HI reacts with 1 mole of RbOH to produce 1 mole of RbI and 1 mole of H2O.

To determine the molarity of the initial RbOH, we can use the following formula:

Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)

First, let's calculate the number of moles of HI in the 300 mL sample:

moles of HI = Molarity x volume in liters

moles of HI = 2.15 mol/L x 0.3 L

moles of HI = 0.645 mol

Since 1 mole of HI reacts with 1 mole of RbOH, the number of moles of RbOH used in the titration is also 0.645 mol.

Now, we can use the volume and concentration of the RbOH solution to calculate its molarity:

Molarity of RbOH = (moles of RbOH) / (volume of RbOH solution in liters)

Molarity of RbOH = 0.645 mol / 0.212 L

Molarity of RbOH = 3.04 M

Therefore, the molarity of the initial RbOH solution was 3.04 M, which corresponds to the aqua green option.

Answer:

The balanced chemical equation for the reaction between hydriodic acid (HI) and rubidium hydroxide (RbOH) is:

HI + RbOH → RbI + H2O

From the balanced equation, we can see that the stoichiometry of the reaction is 1:1, which means that 1 mole of HI reacts with 1 mole of RbOH.

Given that a 300 mL sample of HI with a concentration of 2.15 M is completely neutralized by 212 mL of RbOH, we can use the following equation to determine the molarity of RbOH:

Molarity of HI x Volume of HI = Molarity of RbOH x Volume of RbOH

2.15 M x 0.300 L = Molarity of RbOH x 0.212 L

Molarity of RbOH = (2.15 M x 0.300 L) / 0.212 L = 3.04 M

Therefore, the molarity of the initial RbOH solution was 3.04 M, option (aqua green).

The 250 mL solution of 0.10 M HCl contains 0.9115 g of HCl in total.

For acid-base reactions, raffination, and pH control, 0.1M hydrochloric acid is frequently employed. Every educational setting can employ this chemical.

Moles of solute (n) / volume of solution Equals molarity (M) (V)

If we rewrite this formula, we obtain:

moles of solute (n) = Molarity (M) x volume of solution (V)

Substituting the given values, we get:

moles of HCl = 0.10 M x 0.250 L = 0.025 moles

The molar mass of HCl, 36.46 g/mol, may be used to determine its mass. The formula is as follows:

mass of solute (m) = moles of solute (n) x molar mass (M)

When we change the values, we obtain:

mass of HCl = 0.025 mol x 36.46 g/mol

= 0.9115 g

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Answer: 3.23 x 10^23

Explanation: The number of molecules is found when the number of moles is multiplied by Avogadro's number, which is 6.022 x 10^23

5.36 moles x 6.022 x10^23 = 3.23 x 10^23

In the periodic table, strontium (Sr) and calcium (Ca) both belong to Group 2A, sometimes referred to as the alkaline earth metals.

After the disaster, radioactive substances were primarily spread by contaminated rain on open surfaces like lawns, parks, roadways, and building roofs. Due to the effects of wind, rain, traffic, street washing, and cleanup since then, there is less surface contamination in metropolitan areas.

At least 5% of the radioactive reactor core was discharged into the atmosphere following the steam explosion and fires.

To know more about radioactive visit:-

https://brainly.com/question/7180704

#SPJ1

The volume of the solution is 39.6 mL. Solutions can be formed by dissolving solids, liquids, or gases in a liquid solvent or by dissolving gases in a solid solvent.

What is Solution?

A solution is a homogeneous mixture of two or more substances in which the components are uniformly distributed on a molecular or ionic level. In a solution, the substance that is present in the largest amount is called the solvent, and the substance that is present in smaller amounts is called the solute.

We can use the following formula to calculate the volume of the solution:

Molarity (M) = moles of solute (n) / volume of solution in liters (V)

First, we need to calculate the number of moles of Cu(NO3)2:

mass of Cu(NO3)2 = 6.25 g

molar mass of Cu(NO3)2 = 187.56 g/mol (63.55 g/mol for Cu + 2x14.01 g/mol for N + 6x16.00 g/mol for O)

moles of Cu(NO3)2 = mass / molar mass = 6.25 g / 187.56 g/mol = 0.0333 mol

Next, we can rearrange the formula to solve for the volume of the solution:

V = n / M

V = 0.0333 mol / 0.840 M = 0.0396 L

Finally, we convert the volume to milliliters:

V = 0.0396 L x 1000 mL/L = 39.6 mL

Learn more about Solution from the given link

https://brainly.com/question/25326161

#SPJ1

Schrodinger's Quantum Mechanical Model, which is currently recognised by modern science, is the electron model. The electron cloud model is another name for this one.

The term "electron cloud" refers to the current atomic structure model. A physicist from Austria named Edwin Schrodinger argued that electrons do not follow static or permanent trajectories.

The contemporary atomic model, often known as the cloud model, depicts atoms as having a nucleus made up of protons and neutrons and a diffuse gradient or cloud surrounding it that is made up of electrons. Because electron activity is probabilistic, electrons are often depicted as clouds.

To know more about electron visit:-

https://brainly.com/question/28977387

#SPJ1

Vitamin C drink with 1025 mg of ascorbic acid contains 3.50 × 10^21 molecules of C6H8O6.

What is Molecules?

A molecule is the smallest particle in a chemical element or compound that has the chemical properties of that element or compound. It is made up of two or more atoms that are chemically bonded together. The atoms can be of the same element, as in the case of diatomic molecules like O2 and H2, or they can be different elements, as in the case of water (H2O) or carbon dioxide (CO2).

First, let's calculate the molar mass of ascorbic acid (C6H8O6):

Molar mass of C = 12.01 g/mol

Molar mass of H = 1.008 g/mol

Molar mass of O = 16.00 g/mol

Molar mass of C6H8O6 = (6 × 12.01) + (8 × 1.008) + (6 × 16.00) = 176.12 g/mol

Now we can use the molar mass to convert the given mass of ascorbic acid into moles:

Number of moles = Mass / Molar mass

Mass of ascorbic acid = 1025 mg = 1.025 g

Number of moles of ascorbic acid = 1.025 g / 176.12 g/mol = 0.00582 moles

Finally, we can use Avogadro's number to convert from moles to molecules:

Number of molecules = Number of moles × Avogadro's number

Number of molecules of C6H8O6 = 0.00582 moles × 6.022 × 10^23 molecules/mol = 3.50 × 10^21 molecules

Learn more about Molecules from the given link

https://brainly.com/question/475709

#SPJ1

We must identify the limiting reactant and use that information to compute the maximum amount of hydrofluoric acid that can be produced in order to provide answers to these questions. Calculating the quantity of extra reactant left behind after the reaction is finished is also necessary.

A limiting reagent is a reactant in a chemical reaction that controls how much product is created, according to the definition of the term. Because the reactions between the elements and compounds in a balanced chemical equation depend on their mole ratios, the use of a limiting reactant is necessary.

A substance that takes part in a chemical reaction is known as a limiting reactant. It establishes the maximum product amount that

To know more about   tetrafluoride visit:-

brainly.com/question/27590943

#SPJ1