In the menstrual system a release of an ovum is called what??

Iodine-131 is a radioactive isotope with a half life of 8 days. radioactive decay is a first order reaction. the initial concentration of i-131 is 0.1802 m. The concentration of iodine-131 after 31.0 days is 0.0113 m.

Radioactive decay is the procedure by which unstable atomic nuclei lose energy by emitting particles or radiation. This transformation of a radioactive nucleus into a more stable one typically involves the emission of one or more particles or photons. The products of radioactive decay are atoms of one or more various elements, known as radiogenic isotopes, that have chemical characteristics distinct from those of the original radioactive material. Let's now address the question.

The concentration of iodine-131 after 31.0 days can be calculated using the half-life of the isotope and the initial concentration. The concentration of I-131 can be determined using the following formula:

Nf = N0 (1/2)^(t/T1/2)

Where: Nf = final concentrationN0 = initial concentration, t = time elapsedT1/2 = half-life of the isotope

Given values are as follows:

Initial concentration N0 = 0.1802 m

Half-life T1/2 = 8 days

Elapsed time t = 31.0 days

Using the formula,

Nf = N0 (1/2)^(t/T1/2)

Nf = 0.1802 m (1/2)^(31.0/8)

Nf = 0.0113 m

Therefore, the concentration of iodine-131 after 31.0 days is 0.0113 m.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11

The material W is most likely a metal. The higher the thermal conductivity of a material, the faster heat will be transferred through it.

Thermal conductivity is the ability of a material to conduct heat, i.e., how quickly heat can be transferred through a material. It is a measure of the rate at which heat flows through a material when a temperature difference exists between two points in the material.

Materials with high thermal conductivity are good conductors of heat, meaning they allow heat to flow easily through them. Examples of materials with high thermal conductivity include metals like copper, aluminum, and silver. Materials with low thermal conductivity are poor conductors of heat, meaning they do not allow heat to flow easily through them. Examples of materials with low thermal conductivity include insulators like wood, plastic, and air.

To determine which material is most likely a metal, we need to look for the material with the highest thermal conductivity.

Material              Temperature after 30 seconds

W                         50°C

X                          40°C

Y                          30°C

Z                          20°C

From the table, we can see that material W had the highest temperature after 30 seconds, followed by material X, Y, and Z. This indicates that material W is the best conductor of heat, making it the most likely to be a metal.

To know more about thermal conductivity, visit:

https://brainly.com/question/7643131

#SPJ1

UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-

CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.


The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.

To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.

For more similar questions on topic dissociate

brainly.com/question/15321204

#SPJ11

The molar mass of the solute x is 85.32 g/mol.

The mass of the unknown, non-volatile, non-electrolyte solute = 12.0 g

Mass of the solvent = 100 g

The vapor pressure of the solvent before adding the solute = 100 torr

The vapor pressure of the solvent after adding the solute = 91.4 torr

Temperature = 299 K

Raoult's law can be written as:

P₂ = X₂ * P₁

Where:

P₁ = the vapor pressure of the pure solvent

P₂ = the vapor pressure of the solution

X₂ = the mole fraction of the solute

Solving for

X₂;X₂ = P₂/P₁ = 91.4/100

    X₂ = 0.914

Calculate the moles of benzene;

n = 100g / 78.11 g/mol = 1.28 moles

X₂ = moles of solute / (moles of solute + moles of benzene)

Substituting the value of X₂ and moles of benzene;

n = 0.1406 moles

Now we need to calculate the moles of the solute;

Mass of solute = 12.0 g

Now, we will use the following formula to calculate the molar mass of the solute;

Molar mass = Mass of solute / Moles of solute

Molar mass = 12.0 g / 0.1406 moles

Molar mass of the solute is 85.32 g/mol.

Learn more about molar mass at https://brainly.com/question/837939

#SPJ11

The activation energy for a forward reaction is not the same as the activation energy for the reverse of the same reaction. It is because of the reason that activation energy is the energy needed for a reaction to occur.

The energy barrier for a forward reaction is distinct from the energy barrier for a backward reaction. The energy required to break bonds in the reactants is known as activation energy.

Only those molecules with sufficient kinetic energy can overcome the activation energy barrier and form new products. The energy that must be overcome in order to transform reactants into products is referred to as activation energy. If the activation energy for a reaction is lower, the reaction will proceed more quickly than if it were higher.

The activation energy of a forward reaction is not the same as the activation energy of a reverse reaction since the energy requirements for each reaction are unique.

To learn more about activation energy refer - https://brainly.com/question/13565255

#SPJ11

This mistake would lead to inaccurate results because the unknown acid wasn't completely transferred into the flask. As a result, the recorded results won’t reflect the true acid concentration of the unknown acid.

In order to obtain accurate results, all of the unknown acid must be completely transferred into the flask before titrating with a NaOH solution that was correctly standardized.

When this step is not taken, the amount of acid titrated will not be an accurate representation of the unknown acid's concentration. This leads to a lower than expected titration result, which in turn leads to inaccurate results.

It is important to remember to transfer all of the unknown acid into the flask before titrating with a standardized NaOH solution. Doing so ensures that the titration results will accurately reflect the concentration of the unknown acid.

To know more about titration click on below link:

https://brainly.com/question/2728613#

#SPJ11

A cell must keep a similar concentration of dissolved substances with the fluid surrounding them because it helps in maintaining homeostasis.

Homeostasis is the ability of the body to regulate its internal environment in order to maintain a stable, constant condition. For example, the body regulates temperature, blood sugar levels, pH levels, and other factors to maintain a stable internal environment.

When there is an imbalance in the concentration of dissolved substances between the cell and its surrounding fluid, the cell is at risk of losing or gaining too much water. This can cause the cell to swell or shrink, which can interfere with its normal functions.

To maintain homeostasis, the cell needs to regulate the movement of substances across its membrane in response to changes in the concentration of dissolved substances in the surrounding fluid. By doing so, the cell can maintain a stable internal environment and function properly.

For more question on homeostasis click on

https://brainly.com/question/13127022

#SPJ11

Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.

Convert the mass of sulfur given to moles.

1.9 g / 32 g/mol = 0.09 mol

The moles by the number of trials you need to do:

0.09 mol x 3 trials = 0.27 mol

The moles back to grams to make sure you have enough sulfur:

0.27 mol x 32 g/mol = 8.64 g

Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.

to know more about sulfur refer here:

https://brainly.com/question/1478186#

#SPJ11

The VSEPR model explains that each atom in a molecule with a central atom will achieve a geometry of the molecule which minimizes the repulsion between electrons of the molecule in the valence shell of that atom.

VSEPR Model can be used to predict the structure of any molecule with a central metal atom present in it. In the polyatomic molecules which is the molecules made up of three or more atoms and one of the constituent atoms is determined as the central atom to which all other atoms belonging to the molecule are linked together.

VSEPR theory explains five main shapes of simple molecules consisting the central atom. Those five structure basically are linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral geometry. Using the VSEPR theory, we predict that the electron bond pairs and lone pairs on the center atom will help us to predict the shape of a central atom of a molecule. Using this theory the shape of a molecule is determined by the location of the nuclei and its electrons of the molecule.

To learn more about VSEPR Model

https://brainly.com/question/14992767

#SPJ4

They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.

When the amount of forward reaction speed equal a rate of backward reaction, chemical equilibrium has occurred. In other words, neither the reactant nor product concentrations have changed significantly.

What is a good example of chemical equilibrium?

reactions where the total number of molecules as in reactants and products is equal. O2 (g) Plus N2 (g) 2NO, for instance (g) reactions in which there are more molecules in the reactants than in the products as a whole. Cl2 (g) Plus CO (g) COCl2, for instance (g)

They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.

To know more about equilibrium visit:

brainly.com/question/30694482

#SPJ9

question is - In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. why?

The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.

In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.

Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:

N2 + 3H2 → 2NH3

To know more about catalyst click on below link :

https://brainly.com/question/24430084#

#SPJ11

The mass in g of sucrose required to make 250 ml of 12.5% (w/v) sucrose solution is: 31.25 g

To calculate the mass of sucrose required to make 250 mL of a 12.5% (w/v) sucrose solution, we need to use the formula

mass of solute (g) = (desired %)(volume of solution (mL))/100.

In this case, the mass of sucrose is equal to (12.5)(250 mL)/100 = 31.25 g.

To explain the calculation further, the term "w/v" indicates the weight-to-volume ratio of the solution, meaning 12.5 g of sucrose per 100 mL of solution.

To calculate the mass of sucrose needed for 250 mL of the solution, you must multiply the desired percentage of 12.5 by the desired volume of the solution of 250 mL and then divide by 100. This gives us 31.25 g, which is the answer to one decimal place.

To know more about sucrose refer here:

https://brainly.com/question/29186350#

#SPJ11

Answer: In the movie Dark Waters, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by the chemical company DuPont.

Explanation: In the movie Dark Waters, the call from the Kigers is the key moment that sets off the plot. The Kigers, who are farmers in West Virginia, call Robert Bilott, a corporate defense attorney, and ask for his help in investigating the strange deaths of their cattle. Bilott is reluctant to take on the case at first, but he eventually agrees to visit the Kigers' farm and see the situation for himself.

During his visit, Bilott discovers that the Kigers are just one of many families in the area who have experienced unexplained deaths and illnesses among their livestock, as well as health problems among their own family members. Bilott begins to suspect that the cause of these health issues is pollution from a nearby chemical plant owned by DuPont, a multinational chemical company.

Bilott takes on the case and begins a long and difficult legal battle against DuPont, uncovering evidence that the company had long known about the dangers of the chemicals it was using - specifically a substance called PFOA, which was used in the production of Teflon - but had covered up the evidence and misled regulators and the public about the risks.

In the end, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by DuPont, and sets off a series of events that ultimately lead to the exposure of corporate wrongdoing and the pursuit of justice for those affected by the pollution. The Kigers' call is a catalyst for change, prompting Bilott to take action and exposing the truth about a powerful and deceitful corporation.

Hope this helps, and have a great day!

Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Explanation:

Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.

Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.

The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.

Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Learn more about diamagnetism here:

https://brainly.com/question/15462756#

#SPJ11

When potassium chloride (KCl) is dissolved in water, it produces both potassium (K+) and chloride (Cl-) ions. Therefore, the correct answer is K+ &  Cl-.

When KCl is dissolved in water, the ions K+ and Cl- are produced. The molecular formula for potassium chloride is KCl. It's a salt that is made up of two ions: potassium ions (K+) and chloride ions (Cl-). When the salt is put into water, the ions dissociate, causing the salt to dissolve.

Water is a polar molecule, which means it has a positive and negative end. When KCl is put in water, the negatively charged chlorine atoms are drawn to the positive end of the water molecule, and the positively charged potassium atoms are drawn to the negative end.

As a result, the salt dissolves completely, producing the K+ and Cl- ions in the solution. Thus, the correct answer is ions K+ and Cl-.

To know more about KCl, refer here:

https://brainly.com/question/23614978#

#SPJ11

As temperature increases, vapor pressure of substance also increases due to an increase in  kinetic energy of the molecules. The correct answers are options: 1, 2, 3, 4.

As temperature increases, vapor pressure of a substance also increases due to an increase in  kinetic energy of molecules Substances with stronger intermolecular forces will have lower vapor pressure because it requires more energy to break bonds between molecules and transition into  gas phase. An increase in external pressure will decrease  vapor pressure. Molecular size and shape of a substance can affect intermolecular forces and therefore its vapor pressure. For example, larger molecules tend to have stronger intermolecular forces, which result in lower vapor pressures. Options are 1, 2, 3, 4  correct .

To know more about vapor pressures, here

brainly.com/question/26127294

#SPJ4

--The complete Question is, which of the following will affect the vapor pressure of a pure molecular substance?

select all that apply.

1. the external pressure

2. the structure of the substance

3. the strength of the intermolecular forces

4. the temperature

5. the weather conditions--

The half-life of the isotope is 11.2 years.

The half-life of a radioactive isotope is the time it takes for half of the atoms in a sample to undergo radioactive decay. For a radioactive isotope with a decay rate of 6.2 percent per year, the half-life can be calculated as follows:

Half-life = ln(2) / (decay rate) = ln(2) / 0.062 = 11.2 years (rounded to the nearest tenth)

To understand this calculation in further detail, it is helpful to consider the concept of radioactive decay in terms of probability. After one half-life has elapsed, there is a 50 percent chance that an atom will have decayed, and a 50 percent chance that it will remain undecayed. After two half-lives have elapsed, there is a 75 percent chance that an atom will have decayed, and a 25 percent chance that it will remain undecayed.

This concept can be applied to the equation above, as the probability of decay during a single time interval is equal to the decay rate multiplied by the length of the time interval. By solving this equation, the half-life of a given radioactive isotope can be determined.

Learn more about half-life here: https://brainly.com/question/1160651.

#SPJ11

The volume of the solution in milliliters is 547.13 mL.

How to calculate the volume of the solution in milliliters?

The molarity of the solution is given by;

Molarity = Number of moles of solute / Volume of solution in liters

Using the above formula, we can calculate the volume of the solution as;

Volume of solution in liters = Number of moles of solute / Molarity

Number of moles of CuNO3 can be determined as follows:

Number of moles = Given mass of the substance / Molar mass of the substance

= 7.66 g / (Cu: 63.55 g/mol + N: 14.01 g/mol + 3O: 3 x 16 g/mol)

= 0.05 mol

Substituting the values of molarity and number of moles of CuNO3 in the formula of volume of solution, we get:

Volume of solution in liters = Number of moles of solute / Molarity

= 0.05 mol / 0.140 M = 0.357 L

Converting the volume in liters to milliliters;

Volume in milliliters = Volume in liters × 1000

= 0.357 L × 1000= 357 mL

Thus, the volume of the solution in milliliters is 357 mL.

Learn more about volume of the solution here:

https://brainly.com/question/14710169#

#SPJ11

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of photosynthetic organisms like cyanobacteria releasing oxygen as a byproduct of their metabolism.

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of the lack of oxygenic photosynthesis. The first known oxygen-producing organisms were cyanobacteria, which appeared around 2.3 billion years ago.

Cyanobacteria was the first organism that could perform photosynthesis and release oxygen into the atmosphere as a by-product. They converted the Earth's anaerobic atmosphere into an oxygen-rich environment. The oxygenation event occurred over several hundred million years, transforming the Earth's atmosphere from oxygen-poor to oxygen-rich.

Anaerobic bacteria thrived in the planet's atmosphere because the available oxygen was scarce. The lack of oxygenic photosynthesis resulted in low levels of oxygen in the Earth's atmosphere. However, oxygenic photosynthesis by cyanobacteria increased the levels of oxygen in the atmosphere.

The planet's atmospheric composition is currently around 78 percent nitrogen, 21 percent oxygen, and a few other trace gases.

To know more about photosynthetic organisms, refer here:

https://brainly.com/question/5870637

#SPJ11

The balanced chemical equation for the reaction between carbon dioxide gas and liquid water to produce aqueous carbonic acid is given below.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

Here, the forward reaction is the dissolution of carbon dioxide in water, and the reverse reaction is the release of carbon dioxide from carbonic acid.

Carbonic acid is a weak acid that forms when carbon dioxide reacts with water. It can be shown that the reaction between carbon dioxide and water is a reversible reaction, which means that the carbonic acid can also dissociate into carbon dioxide and water.

To write a balanced chemical equation, we follow these steps:

Using the above steps we get the following balanced chemical equation for the reaction of carbon dioxide and liquid water.

[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]

To learn more about balanced chemical equations refer - https://brainly.com/question/14427845

#SPJ11

The equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Therefore 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

The chemical equation Ca + 2HCl -> CaCl2 + H2 represents the reaction between calcium (Ca) and hydrochloric acid (HCl) to produce calcium chloride (CaCl2) and hydrogen gas (H2).

To balance this equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have:

Therefore, the equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Thus 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

To learn more about hydrogen; https://brainly.com/question/24433860

#SPJ11

The structure of 5-hydroxy-2-phenyl-3-hexanone is as follows:

The structure of 5-hydroxy-2-phenyl-3-hexanone is made up of a hexanone backbone, which is a six-carbon chain with a ketone functional group attached to the second carbon atom. The carbonyl group on the hexanone backbone has a phenyl group and a hydroxy group, which is a hydroxyl group connected to the fifth carbon atom of the hexanone backbone, attached to it.

The prefix 5-hydroxy-2-phenyl-3-hexanone indicates that the hydroxyl group is attached to the fifth carbon atom of the hexanone backbone, while the phenyl group is attached to the second carbon atom of the hexanone backbone.

The structural formula of 5-hydroxy-2-phenyl-3-hexanone is as follows:

In summary, the correct structure for 5-hydroxy-2-phenyl-3-hexanone is a hexanone backbone with a ketone functional group on the second carbon atom, a phenyl group attached to the second carbon atom, and a hydroxyl group attached to the fifth carbon atom. The structural formula of 5-hydroxy-2-phenyl-3-hexanone is given above.

To know more about  Hexanone backbone refer here:

https://brainly.com/question/30156644#

#SPJ11

The thiocyanate ion (SCN-) concentration equals the complex ion concentration in beakers 2-7 because the reaction that took place was a 1:1 stoichiometric reaction. This means that the moles of SCN- reactant is equal to the moles of complex product formed.

The thiocyanate ion concentration in beakers 2-7 can be assumed to equal the complex ion concentration because the reaction between the iron(III) ion and thiocyanate ion is practically irreversible. According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion.

Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.Let's use this information to provide an HTML-formatted answer below:

In beakers 2-7, the thiocyanate ion concentration is assumed to equal the complex ion concentration because the reaction between iron(III) ions and thiocyanate ions is practically irreversible.

According to the given information below:

2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)

The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion. Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.

For more such questions on stoichiometric reaction , Visit:

https://brainly.com/question/29007372

#SPJ11

The pH and the citrate ion concentration for a 0.05 M solution of citric acid which is a tricrotic acid and is present in citrus fruits are to be calculated. The formula of citric acid is C6H8O7.

It's three hydrogen atoms (H) have three different pKa values because of the differences in the proton-donating properties, which will be used to calculate the citrate ion concentration. The given formula of Citric acid is C6H8O7There are three acidic hydrogens in citric acid.

The acid dissociation constant, Ka, for citric acid is given as follows: Ka1 = 7.4 × 10−4Ka2 = 1.7 × 10−5Ka3 = 4.0 × 10−7Step 1: Writing the equation for the first dissociationKa1 = [H+][C6H7O7–] / [C6H8O7]where [H+] is hydrogen ion concentration, [C6H7O7–] is citrate ion concentration, and [C6H8O7] is citric acid concentration. Citrate ion concentration = C6H7O7–Citrate ion concentration = (0.05 − [H+C6H7O7−])/2= (0.05 − 3.7 × 10−5) / 2= 0.0248The concentration of the citrate ion is 0.0248.Step 6: Computing the pH from the hydrogen ion concentration pH = −log10[H+]pH = −log10(3.7 × 10−5)= 4.43The pH of a 0.05 M solution of citric acid is 4.43.

Read more about concentration :

https://brainly.com/question/17206790

#SPJ11

The reaction scheme is as follows:

Styrene (monomer) + Azobisisobutyronitrile (initiator) →  Radical polymers + Nitrile groups

Radical polymers then undergo combination or disproportionation as the possible modes of termination:

Combination:

Radical polymers + Radical polymers → Polystyrene (end product)

Disproportionation:

Radical polymers → Polystyrene + Styrene (monomer)

Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.

During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.

These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,

where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.

Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.

This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.

The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.

to know more about styrene refer here:

https://brainly.com/question/14546335#

#SPJ11

There are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

To find out how many atoms are in 0.30 moles of sulfur dioxide (SO2), we need to first determine the number of molecules and then find out the total number of atoms.

A mole is a unit that represents 6.022 x 10^23 entities (atoms, molecules, ions, etc.) of a substance. This number is called Avogadro's number.

Determine the number of SO2 molecules in 0.30 moles:

Calculate the total number of atoms in the SO2 molecules:

Each molecule of sulfur dioxide (SO2) consists of one sulfur atom and two oxygen atoms. Thus, there are three atoms per SO2 molecule.

So, there are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

Read more about atoms here:

https://brainly.com/question/17545314

#SPJ1

Manganese (Mn) is a chemical element with the symbol Mn and atomic number 25. It is a transition metal that is essential for bone growth, among other things. The mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is to be calculated.

The atomic mass of manganese is 54.94 g/mol, which means that 1 mol of manganese weighs 54.94 g. Since 1 kg equals 1000 g, the number of moles of manganese in 1 kg of bone is determined by dividing 1000 g by 54.94 g/mol.18.20 moles of manganese can be obtained by solving this equation as follows:1000 g ÷ 54.94 g/mol = 18.20 molIt is known that there are 6.02 x 10^23 atoms in 1 mole of any element.

Multiply the number of moles by Avogadro's number to obtain the number of atoms:18.20 mol x 6.02 x 10^23 atoms/mol = 1.096 x 10^25 atomsIn the bone, there are 1.096 x 10^25 manganese atoms. Because we want to determine the mass of 3.22 x 10^20 Mn atoms.

we must first convert the number of atoms into moles.1.796 x 10^-6 moles can be obtained by dividing 3.22 x 10^20 atoms by Avogadro's number:3.22 x 10^20 atoms ÷ 6.02 x 10^23 atoms/mol = 1.796 x 10^-6 mol Finally, we must convert this number of moles to grams.

Multiply the number of moles by the atomic mass to obtain the number of grams: 1.796 x 10^-6 mol x 54.94 g/mol = 9.88 x 10^-5 gThe mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is 9.88 x 10^-5 g.

To know more about Manganese refer here:

https://brainly.com/question/29743410#

#SPJ11

Answer:

0.0161 M

Explanation:

To find the molarity of the NaCl solution, we need to use the formula:

Molarity (M) = moles of solute / liters of solution

First, we need to calculate the number of moles of NaCl in the solution. We can do this by dividing the mass of NaCl by its molar mass. The molar mass of NaCl is 58.44 g/mol.

moles of NaCl = mass of NaCl / molar mass of NaCl

moles of NaCl = 6.24 g / 58.44 g/mol

moles of NaCl = 0.1066 mol

Now we can use the formula for molarity:

Molarity (M) = moles of solute / liters of solution

Molarity (M) = 0.1066 mol / 6.62 L

Molarity (M) = 0.0161 M

Therefore, the molarity of the student's NaCl solution is 0.0161 M.

"The melting of a substance at its melting point is an isothermal process" is true.

An isothermal process is a thermodynamic method in which the temperature of a substance remains constant as heat is added or removed.

A reversible expansion or contraction of a gas is the most straightforward example of an isothermal process.

When a gas expands, it does work on the surroundings, and the energy from the gas is transferred to the surroundings. An isothermal process occurs when the gas expands slowly enough that the temperature remains constant.

Here are some additional points to remember: If the pressure on a gas increases, the gas compresses and loses energy in the form of heat. An isothermal process is one in which the temperature of the gas remains constant. So, when a gas is compressed in an isothermal process, the energy lost as heat is transferred back to the gas as work.

The opposite happens during a process in which the gas expands. The energy expended in work is absorbed by the gas, and the heat lost is restored to the gas. The temperature of the gas remains constant during the process.

To know more about  Isothermal process refer here:

https://brainly.com/question/12023162#

#SPJ11

Answer:

factor = 5.5 3 sig figs = 5.50

The pressure will: decrease by the same factor

Explanation:

24.2/4.40

The volume will increase by a factor of 5.5.

The ideal gas law states that;

PV = nRT,

where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature expressed in kelvin (K).

However, in this case, the temperature is constant, which means that we can simplify the formula to

PV = constant

or

V₁P₁ = V₂P₂

where V₁ is the initial volume, P₁ is the initial pressure, V₂ is the final volume, and P₂ is the final pressure.

Since the pressure is constant in this case, the equation becomes

V₁ = V₂ (when P is constant).

Therefore, the volume increased by a factor of:

V₂/V₁ = 24.2 L/4.40 L = 5.5 times.

To learn more about the volume of a gas refer -https://brainly.com/question/28961686

#SPJ11