H2
Factors that affect the rate of diffusion of a gas including the density of the gas temperature concentration difference and diffusion distance. The density of the diffusing gas depends on how high light is or how heavy the gas is.
a 0.1 m acid solution at 298 k would conduct electricity best of the acid had ka value of
As the conductivity of a 0.1 M acid solution at 298 K depends on the acid's strength, a specific Ka value cannot be determined.
How can you figure out the acid's ka value, which would allow it to conduct electricity most effectively?We may utilize the following relationship between Ka and the level of ionization to estimate the Ka value that would produce the maximum conductivity for a 0.1 M acid solution at 298 K:
α²/(1-α) = Ka/[H+]
α²/(1-α) = Ka/0.1
1²/(1-1) = Ka/0.1\sKa = 0
Given that only strong acids completely breakdown into ions in solution, it follows that the acid would need to be strong with a Ka value significantly greater than zero in order to conduct electricity most effectively.
To learn more about conductivity of acid visit:
brainly.com/question/28721140
#SPJ1
Formic acid has a Ka of 1.77 * 10 - 4.1To 55.0 mL of 0.25 M solution 75.0 mL of 0.12 M NaOH is added. What is the resulting pH .
The resulting pH of the solution is calculated as to be approximately 2.97.
What is formic acid?Formic acid is the simplest carboxylic acid that has the chemical formula HCOOH and structure H−C−O−H.
Balanced equation is : HCOOH + NaOH → NaCOOH + H₂O
n(HCOOH) = V x C = 55.0 mL x 0.25 mol/L = 0.01375 mol HCOOH
And 75.0 mL of 0.12 M NaOH solution contains: n(NaOH) = V x C = 75.0 mL x 0.12 mol/L = 0.009 mol NaOH
n(HCOOH remaining) = n(HCOOH) - n(NaOH) = 0.01375 mol - 0.009 mol = 0.00475 mol
pH = pKa + log([A-]/[HA])
pKa is acid dissociation constant for HCOOH, [A-] is concentration of formate ion (HCOO-), and [HA] is concentration of unreacted formic acid.
n(HCOO-) = n(NaOH) = 0.009 mol
V = 55.0 mL + 75.0 mL = 130 mL = 0.13 L
Therefore, concentration of unreacted formic acid is: [HA] = n(HCOOH remaining) / V = 0.00475 mol / 0.13 L = 0.0365 M
pH = pKa + log([A-]/[HA]) = -log(1.77 x 10⁻⁴ + log(0.009/0.0365) = 2.97
Therefore, resulting pH of the solution is approximately 2.97.
To know more about formic acid, refer
https://brainly.com/question/10738052
#SPJ1
Help with homework for work sheet
The theoretical yield of the ammonia that is produced in this reaction is 43.9g.
What is the moles?The mole is commonly used to express the amount of a substance in a chemical reaction or to compare the amount of different substances.
Number of moles of N2
1 mole of N2 occupy 22.4 L
x moles of N2 occupies 29 L
x = 1.29 moles
Number of moles of H2 is;
14g/ 2 g/mol = 7 moles
Now;
1 mole of N2 reacts with 3 moles of H2
x moles of N2 reacts with 7 moles of H2
x = 2.33 moles
Then N2 is the limiting reactant
If 1 mole of N2 produces 2 moles of NH3
1.29 moles of N2 will produce 1.29 * 2/1
= 2.58 moles
Mass of NH3 = 2.58 moles * 17 g/mol
= 43.9g
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
Which is NOT a compound?
A. silicon dioxide
B. water
C. carbon dioxide gas
D. oxygen gas
Answer: Oxygen
Explanation: Its found on the periodic table as an element.
HCI + NaOH ->>
NaCl + H₂O
What volume of sodium hydroxide (NaOH) 0.9 M would be required to titrate 250 mL of hydrochloric acid (HCI)
0.25 M?
62.5 mL NaOH
(yellow)
69.44 mL NaOH
(purple)
90 mL NaOH
(blue)
Please help!!!!
The balanced chemical equation for the reaction between hydrochloric acid (HCI) and sodium hydroxide (NaOH) is:
HCI + NaOH -> NaCl + H2O
From the equation, we can see that 1 mole of HCI reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.
First, let's calculate the number of moles of HCI in 250 mL of 0.25 M solution:
Molarity (M) = moles of solute / volume of solution (L)
0.25 M = moles of HCI / 0.25 L
moles of HCI = 0.25 L x 0.25 M = 0.0625 moles
Since 1 mole of NaOH reacts with 1 mole of HCI, we will need 0.0625 moles of NaOH to neutralize the HCI.
Now, let's calculate the volume of 0.9 M NaOH solution needed to provide 0.0625 moles of NaOH:
Molarity (M) = moles of solute / volume of solution (L)
0.9 M = 0.0625 moles of NaOH / volume of NaOH solution (L)
volume of NaOH solution (L) = 0.0625 moles / 0.9 M = 0.0694 L = 69.44 mL
Therefore, 69.44 mL of 0.9 M NaOH solution would be required to titrate 250 mL of 0.25 M HCI solution.
A sample of hydrogen nitrite or nitrous acid, HNO2 contains 8.8 x 1022 atoms. a. How many moles of nitric acid are in the sample? b. How much mass of nitric acid are in the sample?
Answer: The formula for nitrous acid is HNO2, not nitric acid (HNO3).
a. To find the number of moles of HNO2, we need to divide the number of atoms by Avogadro's number (6.022 x 10^23 atoms per mole):
moles = 8.8 x 10^22 atoms / 6.022 x 10^23 atoms/mol
moles = 0.146 mol HNO2
b. To find the mass of HNO2, we need to multiply the number of moles by the molar mass. The molar mass of HNO2 is:
1(1.008) + 1(14.01) + 2(15.99) = 63.01 g/mol
mass = 0.146 mol x 63.01 g/mol
mass = 9.20 g HNO2
Explanation:
The (C4H1 0)3N represents a _______ amine.
Answer:
Tertiary amine
Explanation:
An amine in which the nitrogen atom is directly bonded to three carbons of any hybridization which cannot be carbonyl group carbons.
In studying normal and mutant forms of a particular human enzyme, a geneticist came across a very interesting mutant form of the enzyme. The normal enzyme is 227-amino acids long, but the mutant form was 312-amino acid long, having that extra 85 amino acid as the block in the middle of the normal sequence. What are possible explanations for this phenomenon? How would you distinguish among them?
Determining the underlying cause of the mutant form of the enzyme would require a combination of genetic, molecular, and biochemical techniques to identify any differences.
What is the explanation?The mutation may have resulted from an insertion of extra DNA sequence in the gene encoding the enzyme. This could occur due to a replication error or as a result of exposure to mutagens.
To distinguish this from other possibilities, one could sequence the DNA of the normal and mutant forms of the enzyme to identify the differences.
Learn more about enzyme:https://brainly.com/question/14953274
#SPJ1
Calculate the PH of the solution in the Image
The solution has a pH of around 5.93.
Why is the buffer system of CH3COOH and CH3COONa used?When a weak acid or a weak base is applied in modest amounts, buffer solutions withstand the pH shift. A buffer made of a weak acid and its salt is an example of which is an acetic acid and sodium acetate solution (CH3COOH + CH3COONa).
The weak acid is then partially dissociated in water, resulting in the conjugate base and hydrogen ions:
CH3COOH + H2O ⇌ H3O+ + CH3COO-
The acid dissociation constant, Ka, which is what this reaction's equilibrium constant is, is as follows:
Ka = [H3O+][CH3COO-]/[CH3COOH]
The Henderson-Hasselbalch equation may be used to determine the pH of a solution:
pH = pKa + log([A-]/[HA])
To begin with, we must figure out how much CH3COOH is present in the solution:
moles of CH3COOH = M x V = 0.15 mol/L x 0.050 L = 0.0075 mol
mass of CH3COOH = moles x molar mass = 0.0075 mol x 60.05 g/mol = 0.450 g
After adding sodium acetate, the solution's residual CH3COOH will be:
0.450 g - 1.00 g
= -0.55 g
The amount of sodium acetate supplied may be used to determine the CH3COO- concentration:
moles of CH3COO-=1.00g/82.03 g/mol
=0.0122 mol
The concentration of CH3COO- in the solution will be:
0.0122 mol/0.050 L=0.244 M
The Henderson-Hasselbalch equation may now be used to determine the pH of the solution:
pH = pKa + log([A-]/[HA])
pKa = -log(Ka) = -log(1.75 x 10⁻⁵) = 4.756
[A-]/[HA] = [CH3COO-]/[CH3COOH]
= 0.244 M / 0.0075 M = 32.53
pH = 4.756 + log(32.53)
= 5.93
To know more about solution visit:-
https://brainly.com/question/22695394
#SPJ1
Given the complex [Fe(en)2(NO2)2]NO2
1) What is the oxidation state of the metal?
2) What is the coordination number for the complex ion?
3) What is the shape of the complex ion?
4) Are the ligands strong or weak?
5) Is the compound high or low spin?
6) Is the Epairing < or > delta?
7) Using Crystal Field splitting to show many unpaired electrons are present in the compound?
8) Draw all geometric isomers if they exist.
9) Draw all optical isomers if they exist.
The oxidation state of the iron ion in the complex [Fe(en)2(NO2)2]NO2 is +1.
What is Oxidation State?
Oxidation state, also known as oxidation number, is a number assigned to an atom in a chemical compound that represents the number of electrons that atom has gained or lost relative to its neutral state.
In other words, oxidation state is a measure of the degree of oxidation of an atom in a molecule or ion. An atom is considered to be oxidized if it loses electrons, and reduced if it gains electrons.
In the given complex [Fe(en)2(NO2)2]NO2, the metal is iron (Fe). To determine the oxidation state of the iron ion in the complex, we can use the oxidation states of the other atoms and the charge of the complex.
The en ligand is ethylenediamine (C2H8N2), which has a neutral charge. The NO2 ligand is nitrite, which has a -1 charge. The overall charge of the complex is -1 due to the NO2^- counterion.
Let x be the oxidation state of the iron ion.
From the ethylenediamine ligands, we have a total charge of +4 (2 x +2).
From the nitrite ligands, we have a total charge of -4 (2 x -1 x 2).
From the complex charge, we have a total charge of -1.
Setting the sum of these charges equal to the charge of the iron ion (x) gives us:
+4 - 4 - 1 = x
Simplifying the equation gives us:
-x = -1
Solving for x gives us:
x = +1
Learn more about Oxidation State from given link
https://brainly.com/question/25551544
#SPJ1
The energy diagram shows the changes in energy during a chemical reaction.
Which statement best describes the total energy change of the system?
Potential energy
Reaction progress
A. The reactants have lower potential energy, and energy is
absorbed.
B. The reactants have lower potential energy, and energy is released.
C. The reactants have higher potential energy, and energy is released.
• D. The reactants have higher potential energy, and energy is
absorbed.
Answer: D.
Explanation:
In an exothermic reaction, the reactants have higher potential energy than the products, and energy is released. In an endothermic reaction, the reactants have lower potential energy than the products, and energy is absorbed. In this case, the statement that best describes the total energy change of the system is D. The reactants have higher potential energy, and energy is absorbed.
I hope this helps. Let me know if you have any other questions!
Help and i will give you brislied
The answer to your question is D) An invasive species is not native to the ecosystem and causes harm.
Invasive species of plants and animals typically tend to overtake an ecosystem that they do not naturally occur in. Due to this, it causes the resources within the ecosystem to diminish which ultimately harms other species that naturally occur in said ecosystem.
Which of the chemicals in the equation below is acting as a base?
b. [tex]C_5N_4H_4O_3[/tex] is the chemical in the equation which acts as a base.
A base that can dissolve in water is referred to as being alkali. These chemicals produce salts when they interact chemically with acids. Red litmus can turn blue when bases are present. Depending on the specific way that the qualities of acidity and basicity are examined, the terms acid and base have been defined in a variety of ways.A base is defined as a compound which is capable of accepting a proton or a hydrogen ion in a chemical reaction.
Chemically, the equation is [tex]C_3N_2H_4+C_5N_4H_4O_3 \rightarrow C_3N_2H_5^+ +C_5N_4H_3O_3^-[/tex]
In this equation, [tex]C_5N_4H_4O_3[/tex] is the compound that is accepting a proton (or hydrogen ion) to form [tex]C_3N_2H_5^{+[/tex] and [tex]C_5N_4H_3O_3^-[/tex]. Therefore, [tex]C_5N_4H_4O_3[/tex] is the base in this equation.
learn more about hydrogen ion Refer:brainly.com/question/15082545
#SPJ1
How is an oxbow lake and a deep meander different? its for 14 points.
Answer: Oxbow-shaped meanders have two sets of curves: one curving away from the straight path of the river and one curving back. An oxbow lake starts out as a curve, or meander, in a river.
Explanation:
Which equation would be used to calculate the rate constant from initial
concentrations?
O A. Kea
OB. PV = nRT
O C. k=
[Cror
[A] [B]
O D.
Rate
[A] [BY
-Ea
k = Ae RT
The equation that would be used to calculate the rate constant from initial concentrations is option C:
k = [C] / ([A] [B])
What is Concentration?
It is a measure of how much of a particular substance is dissolved in a given volume of a solution.
where [A] and [B] are the initial concentrations of the reactants and [C] is the concentration of the product at a given time. This equation is known as the rate law for a second-order reaction.
The other equations listed are:
A. Kea - This is not a standard equation used to calculate rate constants from initial concentrations.
B. PV = nRT - This is the ideal gas law, which relates the pressure, volume, temperature, and number of moles of an ideal gas.
Learn more about Concentration from given link
https://brainly.com/question/26255204
#SPJ1
Macmillan Learning
Calculate the standard change in Gibbs free energy for the reaction at 25 °C. Standard Gibbs free energy of formation values can
be found in this table.
Fe₂O3(s) + 2Al(s)
AG=
先
Bi
B
1
Al₂O₂ (s) + 2 Fe(s)
45°F Cloudy
kJ/mol
4 ENG
9:05 PM
3/23/2003
48
4
+
B
*
The standard change in Gibbs free energy for the reaction at 25 °C is 278.0 kJ/mol for the given enthalpy of reaction .
What is Gibbs free energy ?The Gibbs free energy (or Gibbs energy as the preferred name; symbol G) is a thermodynamic potential that can be used to calculate the maximum amount of non-volume expansion work that a thermodynamically closed system can perform at constant temperature and pressure. It also serves as a prerequisite for processes like chemical reactions that may place under these conditions. The Gibbs free energy is denoted by the symbol G(p,T) = U+pV-TS = H-TS, where p denotes pressure, T denotes temperature, U denotes internal energy, V denotes volume, H denotes enthalpy, and S denotes entropy.
What is enthalpy of reaction ?A thermodynamic quantity equal to a system's entire heat content. It is equivalent to the system's internal energy plus the product of pressure and volume.
According to the table, the standard Gibbs free energy of formation values are;
Fe₂O₃ (s) = -822.1 kJ/mol
Al₂O₃ (s) = -1675.2 kJ/mol
Al (s) = -1477.7 kJ/mol
Fe (s) = 0 kJ/mol
The reaction is:
Fe₂O₃ (s) + 2 Al (s) → Al₂O₃ (s) + 2 Fe (s).
Therefore, the standard change in Gibbs free energy for the reaction at 25 °C is:
AG = -822.1 kJ/mol + (2 x -1477.7 kJ/mol) - (-1675.2 kJ/mol) - (2 x 0 kJ/mol) = 278.0 kJ/mol
To know more about Gibbs free energy ,visit ;
https://brainly.com/question/20358734
#SPJ1
use particle diagram to present the reactant and products of a reaction between aluminium and hydrochloric acid
pls draw
During the reaction, the hydrochloric acid molecules break apart into hydrogen ions (H+) and chloride ions (Cl-), which then react with the aluminium atoms to form aluminium chloride (AlCl₃) and hydrogen gas (H₂).
Calculation-HCl HCl
| |
Al Al aluminium
| |
HCl HCl
| |
H₂ Cl₂
Here's a particle diagram to represent the reaction between aluminium and hydrochloric acid.In the diagram, the reactants (hydrochloric acid and aluminium) are shown on the left-hand side, while the products (hydrogen gas and aluminium chloride) are shown on the right-hand side. The circles represent individual particles, with the blue circles representing aluminium atoms, the green circles representing chlorine atoms from hydrochloric acid, and the white circles representing hydrogen atoms from hydrochloric acid.
to know more about aluminium and hydrochloric acid here:
brainly.com/question/31305643
#SPJ1
A solution prepared by dissolving 66.0 g of urea (NH2)2CO in 950 g of water
had a density of 1.018 g mL–1. Express the concentration of urea in
a- weight-percent; b- mole fraction; c- molarity; d- molality.
Perform the conversions.
958.5 mmHg=
atm
2.325 atm=
Torr
444.4 kPa=
atm
1427.2 mmHg=
Pa
Answer: To perform the conversions, we can use the following conversion factors:
1 atm = 760 mmHg
1 atm = 101.325 kPa
1 atm = 14.696 psi
1 atm = 101325 Pa
1 Torr = 1/760 atm
1 Pa = 1/101325 atm
Using these conversion factors, we can perform the conversions as follows:
958.5 mmHg = 958.5/760 atm = 1.2625 atm (rounded to 4 decimal places)
2.325 atm = 2.325 x 760 Torr = 1767 Torr (rounded to the nearest whole number)
444.4 kPa = 444.4/101.325 atm = 4.3817 atm (rounded to 4 decimal places)
1427.2 mmHg = 1427.2/760 atm = 1.8789 atm
= 1.8789 x 101325 Pa = 190694.87 Pa (rounded to 2 decimal places)
Therefore, the conversions are:
958.5 mmHg = 1.2625 atm
2.325 atm = 1767 Torr
444.4 kPa = 4.3817 atm
1427.2 mmHg = 190694.87 Pa
The conversions is given as: 958.5 mmHg=1.26 atm, 2.325 atm=1767.9 Torr, 444.4 kPa=4.381 atm and 1427.2 mmHg= 190237.2 Pa
Conversions refer to the process of changing a quantity or value from one unit of measurement to another. It involves converting the numerical value while maintaining the same physical quantity.
1 atm = 760 mmHg (Torr)
1 atm = 101.325 kPa
1 mmHg (Torr) = 133.322 Pa
Converting 958.5 mmHg to atm:
958.5 mmHg × (1 atm / 760 mmHg) = 1.26 atm
Converting 2.325 atm to Torr:
2.325 atm ×(760 mmHg / 1 atm) = 1767.9 Torr
Converting 444.4 kPa to atm:
444.4 kPa × (1 atm / 101.325 kPa) = 4.381 atm
Converting 1427.2 mmHg to Pa:
1427.2 mmHg × (133.322 Pa / 1 mmHg) = 190237.2 Pa
To know more about conversions, here:
https://brainly.com/question/33338623
#SPJ6
Martha has a large amount of 1.25 M H₂SO4 in her lab. She needs 36 grams of H₂SO4
for a chemical reaction she wants to perform. How many liters of the solution should she use?
Show work to receive credit.
Martha needs to use 0.294 liters or 294 milliliters of the 1.25 M H₂SO4 solution to obtain 36 grams of H₂SO4.
What is Chemical Reaction?
In a chemical reaction, the atoms and molecules of the reactants are rearranged to form new compounds or products. Chemical reactions involve the breaking and forming of chemical bonds between atoms and molecules, which involves the absorption or release of energy.
We can use the formula:
to find the volume of the 1.25 M H₂SO4 solution that contains 36 grams of H₂SO4.
First, we need to calculate the number of moles of H₂SO4 in 36 grams:
molar mass of H₂SO4 = 2 x atomic mass of H + atomic mass of S + 4 x atomic mass of O
= 2 x 1.008 + 32.06 + 4 x 16.00
= 98.08 g/mol
moles of H₂SO4 = mass / molar mass
= 36 g / 98.08 g/mol
= 0.3675 mol
Now we can use the formula above to solve for the volume of the solution:
1.25 M = 0.3675 mol / volume (in liters)
volume (in liters) = 0.3675 mol / 1.25 M
= 0.294 L
= 294 mL
Learn more about Chemical Reaction from given link
https://brainly.com/question/25769000
#SPJ1
2. What happens when heat is removed from a substance at a critical temperature?
O A. The substance releases heat but won't change temperature until the state changes completely.
B. The temperature of the substance will change rapidly as heat is lost until the state changes completely.
C. The heat is cycled back into the substance, causing the temperature to increase.
D. The substance changes temperature at the same rate before, during, and after the change of state.
20.00 moles of helium are mixed with 5.00 mole of oxygen gas in a 15.00 L container at 22.0 0C. Calculate the mole fraction of oxygen gas in the mixture.
The total Mole fraction of oxygen is 0.20 or 20% .
What is the gas mixture's formula?P=n(RTV)=n×const. Only the quantity is affected by the gas's nature in the calculation. Let's assume that we have a mixture of two ideal gases that are present in equal quantities based on this supposition.
The total moles of gas in the combination must first be determined:
Total moles of gas = moles of helium + moles of oxygen
Total moles of gas = 20.00 + 5.00
Total moles of gas = 25.00 moles
Next, we need to calculate the mole fraction of oxygen gas:
Mole fraction of oxygen = moles of oxygen / total moles of gas
Mole fraction of oxygen = 5.00 / 25.00
Mole fraction of oxygen = 0.20 or 20% (rounded to two decimal places)
To know more about Mole fraction visit:-
https://brainly.com/question/29808190
#SPJ1
3. In your experiment, you will weigh out between 0.25 g and 0.50 g of sodium hydrogen
carbonate. If you start with 0.45 g of sodium hydrogen carbonate, how much 3.0 M
HCI should you add to get the most NaCl?
you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.
StepsTo determine how much 3.0 M HCl is needed to react with 0.45 g of sodium hydrogen carbonate (NaHCO3) and get the most NaCl, you need to first calculate the number of moles of NaHCO3 that you have:
molar mass of NaHCO3 = 84.01 g/mol
moles of NaHCO3 = mass / molar mass = 0.45 g / 84.01 g/mol = 0.00536 mol
Next, you need to determine the stoichiometry of the reaction between NaHCO3 and HCl. The balanced chemical equation for this reaction is:
NaHCO3 + HCl → NaCl + H2O + CO2
From this equation, you can see that one mole of NaHCO3 reacts with one mole of HCl to produce one mole of NaCl. Therefore, you need 0.00536 moles of HCl to react with 0.00536 moles of NaHCO3.
To calculate the volume of 3.0 M HCl needed to provide 0.00536 moles of HCl, you can use the following equation:
moles of solute = concentration x volume of solution (in liters)
Rearranging this equation to solve for the volume of solution gives:
the volume of solution = moles of solute/concentration
Plugging in the values gives:
volume of solution = 0.00536 mol / 3.0 mol/L = 0.00179 L or 1.79 mL
Therefore, you need to add 1.79 mL of 3.0 M HCl to react with 0.45 g of NaHCO3 and produce the most NaCl.
learn more about sodium hydrogen carbonate here
https://brainly.com/question/14240995
#SPJ1
A 0.5998g sample of a new compound has been analyzed and found to contain the following masses of elements: carbon = 0.1.565g ; hydrogen = 0.02627g ; oxygen = 0.4170g. Calculate the empirical formula of the compound.
The empirical formula of a novel compound is CH2O if an analysis of a 0.5998g sample reveals that it contains the following masses of elements: carbon (0.1.565g), hydrogen (0.02627g), and oxygen (0.4170g).
What's in a 23.0 g sample of a substance?You need to be aware of a compound's molar mass in order to ascertain its molecular formula. You can then decide which multiple of the empirical formula corresponds to the right molecular formula. 12.0g of carbon, 3.0g of hydrogen, and 8.0g of oxygen make up a compound in a 23.0g sample.
Which chemical has an empirical formula that is 92.3% carbon and 7.7% hydrogen?In a hydrocarbon, carbon makes up 92.3% of the mass and hydrogen makes up 7.7%.
To know more about empirical formula visit:-
https://brainly.com/question/14044066
#SPJ1
if equal 20g of both So2 and O2 are reacted. which substance is alimiting reacted ? how many grams of are formed ?
Answer: The balanced chemical equation for the reaction between SO2 and O2 is:
2 SO2 + O2 → 2 SO3
According to the equation, 1 mole of O2 reacts with 2 moles of SO2 to form 2 moles of SO3.
To determine which substance is the limiting reactant, we need to calculate the amount of product that can be formed by each reactant and choose the reactant that produces the least amount of product.
First, we need to determine the number of moles of SO2 and O2 present:
Number of moles of SO2 = mass / molar mass = 20 g / 64.06 g/mol = 0.312 moles
Number of moles of O2 = mass / molar mass = 20 g / 32.00 g/mol = 0.625 moles
Now we can calculate the amount of product formed by each reactant:
Amount of SO3 formed from SO2 = 0.312 moles × (2 moles SO3 / 2 moles SO2) × (80.06 g/mol SO3) = 12.48 g SO3
Amount of SO3 formed from O2 = 0.625 moles × (2 moles SO3 / 1 mole O2) × (80.06 g/mol SO3) = 100.10 g SO3
From the calculations, we can see that the limiting reactant is SO2, as it produces the least amount of product (12.48 g of SO3). Therefore, 12.48 g of SO3 is formed when 20 g of both SO2 and O2 are reacted.
Explanation:
How many particles of gold is 2.7 moles of gold?
Answer:
1.63 × 10²⁴ particles
Explanation:
The equation to find the number of particles is:
Number of particles = Number of moles × Avagadro's constant
Number of particles = 2.7 × 6.02 × 10²³
∴ Number of particles = 1.63 × 10²⁴
The lethal dose of aspirin is 50 mg per kg of body weight. How many 325 mg tablets would be deadly for a 60 lb child?
To determine the number of 325 mg tablets of aspirin that would be deadly for a 60 lb child, we first need to convert the weight to kg.
1 lb is equal to 0.453592 kg. Therefore, a 60 lb child weighs approximately 27.2155 kg (60 x 0.453592).
The lethal dose of aspirin is 50 mg per kg of body weight. Therefore, for a 27.2155 kg child, the lethal dose would be 1,360.775 mg (27.2155 x 50).
Each aspirin tablet is 325 mg. Therefore, the number of tablets that would be deadly for the child would be 4.19 (1,360.775 / 325).
However, it is important to note that even a slightly higher dose of aspirin can be harmful to a child, and it is never recommended to give aspirin to children without consulting a doctor first.
To know more about aspirin, visit :
https://brainly.com/question/29133232
#SPJ1
If 24.00 grams of aluminum react with 30.00 grams of chlorine, how much aluminum chloride will be produced?
18.80 g
37.61 g
118.6 g
42.63 g
Special rules or laws to predict predominant products for alcohols and ethers in organic chemistry
As alcohols and ethers undergo various reactions, there are a number of organic chemistry rules and principles that may be utilised to anticipate the main products that will result from those reactions.
How does Markovnikov's law relate to alcoholic beverages?Given that the water molecule can be thought of as H—OH, the Markovnikov's rule-following regioselectivity of alcohol products indicates that the hydrogen atom joins to the double bond carbon that has more hydrogen atoms, and the OH group attaches to the carbon that has fewer hydrogen atoms.
The Markovnikov rule is what?According to Markovnikov's rule, when an asymmetrical alkene is combined with an asymmetrical reagent, the reagent's negative half will connect to the carbon atom that has the fewest hydrogen atoms.
To know more about organic chemistry visit:-
https://brainly.com/question/14623424
#SPJ1
What is the maximum mass of aluminum chloride that can be formed when reacting 28.0 g of aluminum with 33.0 g of chlorine?
Aluminum and chlorine react to generate aluminium chloride, according to a balanced chemical equation: 2Al + 3Cl2 2AlCl3. A quantity of aluminium chloride up to 139.5 g can be produced.
What is the most amount of aluminium chloride that can be created when 27 g of aluminium and 32 g of chlorine are combined?When the limiting reagent is totally transformed into products, the maximum amount of product is produced. Two moles of aluminium chloride are created by a full reaction between three moles of chlorine. Hence, 46.4 g of aluminium chloride is the maximum mass that can be produced.
The amount of aluminium and chlorine in the specified masses can be calculated as follows:
Number of moles of aluminum = 28.0 g / 27 g/mol = 1.04 mol
Number of moles of chlorine = 33.0 g / 35.5 g/mol = 0.93 mol
We may get the theoretical yield of aluminium chloride using the balanced equation: 2Al + 3Cl2 → 2AlCl3
1.04 mol Al × (2 mol AlCl3 / 2 mol Al) × (133.34 g AlCl3 / 1 mol AlCl3) = 139.5 g AlCl3
To know more about aluminium chloride visit:-
https://brainly.com/question/16088530
#SPJ1