Pls help Asap this is on a timed quiz.
А_______ reaction is a process in which some substances change to other substances as chemical bonds break and reform.

A. Physical
B. Statistical
C. Chemical
D. Physiological ​

Answer:We can use the kinematic equations of motion to solve this problem. The equation we need to use is:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (which is -9.81 m/s^2), and s is the displacement.

Initially, the ball is thrown straight down with an initial speed of 4.30 m/s and a height of 8.80 m. Let's take the upward direction as positive. Using the equation of motion for displacement, we can find the time it takes for the ball to reach a height of 5.80 m:

s = ut + (1/2)at^2

-3 = 4.3t + (1/2)(-9.81)t^2

-4.905t^2 + 4.3t - 3 = 0

Using the quadratic formula, we find that the time it takes for the ball to reach a height of 5.80 m is t = 0.956 s (rounded to three significant figures).

Now, we can use the equation of motion for velocity to find the velocity of the ball at this point:

v^2 = u^2 + 2as

v^2 = (4.3 m/s)^2 + 2(-9.81 m/s^2)(-3 m)

v = -5.08 m/s

The negative sign indicates that the velocity is in the downward direction. Therefore, the velocity of the ball when it reaches a height of 5.80 m is 5.08 m/s downward.

Explanation:

The maximum current across the resistor is 0.01 amps.

The capacitor can hold a maximum charge of 1500 C.

It takes 0.15 seconds for the capacitor to reach.

a) The maximum current that flows through the resistor during charging can be calculated using the formula I = V/R, where V is the voltage of the battery and R is the resistance of the circuit. Therefore, I = 1.5V / 150Ω = 0.01 A.

b) The maximum charge on the capacitor can be calculated using the formula Q = CV, where C is the capacitance of the capacitor and V is the maximum voltage across the capacitor during charging. Therefore, Q = (1000 μF) * (1.5V) = 1500 μC.

c) The time it takes for the capacitor to reach a potential of 1.0V can be calculated using the formula t = RC, where R is the resistance of the circuit and C is the capacitance of the capacitor. Therefore, t = (150Ω) * (1000 μF) = 0.15 s.

To know more about the Capacitor, here

https://brainly.com/question/31064008

#SPJ4

A 76 kg surfer traveling through the barrel of a wave at 11 m/s has a kinetic energy of  4,958 Joules.

The kinetic energy (KE) of the surfer can be calculated using the formula KE = 1/2mv^2, where m is the mass of the surfer and v is the velocity at which he is traveling through the wave.

Given that the mass of the surfer is 76 kg and his velocity is 11 m/s, we can plug these values into the formula:

KE = 1/2(76 kg)(11 m/s)^2
KE = 4,958 Joules

Therefore, the kinetic energy of the surfer traveling through the barrel of the wave is approximately 4,958 Joules.

This represents the energy of motion or the energy that the surfer possesses due to his velocity. As the surfer moves through the wave, his kinetic energy is constantly changing due to factors such as friction with the water and changes in velocity.

Understanding the concept of kinetic energy is important in many fields, including physics, engineering, and sports science.

Learn more about kinetic energy at: https://brainly.com/question/8101588

#SPJ11

If a rocket takes off from Earth with a certain force, there are several things that must be true about Earth to make this possible.

Firstly, Earth must have a gravitational field that attracts the rocket toward its center. This gravitational force pulls the rocket toward the ground, and the rocket must overcome it with a force greater than the force of gravity in order to take off.

Secondly, Earth's atmosphere must be present, as the rocket needs to push against the air molecules to create thrust and lift off the ground. Thirdly, Earth's surface must be firm enough to support the launch of the rocket, with a strong and stable launchpad to prevent any accidents.

Fourthly, Earth's rotational speed and position in its orbit around the Sun must also be taken into account, as this affects the required trajectory of the rocket for a successful launch. Overall, a combination of Earth's gravitational force, atmosphere, surface conditions, and position in its orbit all play a crucial role in enabling a rocket to take off from Earth.

To learn more about Rocket

https://brainly.com/question/15061209

#SPJ4

Efficient plumbing encompasses various features, technologies, and practices that contribute to water conservation, cost savings, environmental sustainability, and overall system performance.

Certainly! Here are some additional ways to describe efficient plumbing:

1. Saves water and energy: Efficient plumbing systems are designed to minimize water wastage and reduce energy consumption, leading to cost savings and environmental benefits.

2. Enhances water conservation: Efficient plumbing promotes water conservation by utilizing technologies such as low-flow fixtures, dual-flush toilets, and water-efficient appliances.

3. Reduces water bills: By reducing water consumption, efficient plumbing can lead to lower water bills for homeowners and businesses.

4. Prevents leaks and water damage: Properly installed and maintained efficient plumbing systems help prevent leaks and water damage, preserving the integrity of the building and reducing the risk of costly repairs.

5. Improves overall system performance: Efficient plumbing systems are designed to optimize water distribution and drainage, ensuring reliable and consistent performance throughout the building.

6. Supports sustainable practices: Efficient plumbing aligns with sustainable practices by reducing water usage and minimizing the environmental impact associated with water supply and wastewater treatment.

7. Enhances occupant comfort and convenience: Efficient plumbing provides reliable and consistent water supply, temperature control, and proper drainage, enhancing the comfort and convenience of occupants.

8. Meets regulatory requirements: Many building codes and regulations require the installation of efficient plumbing systems to meet water efficiency standards and promote sustainable practices.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

The speed of sound in air at 15.5°C is approximately 340.3 m/s. Using this value, we can calculate the time it takes for the sound's echo to return to the bat from a distance of 25m, which is approximately 0.147 seconds.

a. The speed of sound in air depends on temperature, pressure, and humidity. At 15.5°C, the speed of sound in air is approximately 340.3 m/s. This value is an approximation since the speed of sound can vary based on other factors such as humidity and atmospheric pressure.

b. To calculate the time it takes for the sound's echo to return to the bat, we can use the formula: time = distance/speed. The distance between the bat and the cave wall is given as 25m.

The sound travels from the bat to the wall and back to the bat, so the total distance traveled by the sound is 2*25m = 50m. Using the speed of sound in air, we can calculate the time it takes for the sound to travel this distance:

time = distance / speed

time = 50m / 340.3 m/s = 0.147 seconds

Therefore, it takes approximately 0.147 seconds for the sound's echo to return to the bat.

In summary, the speed of sound in air at 15.5°C is approximately 340.3 m/s. Using this value, we can calculate the time it takes for the sound's echo to return to the bat from a distance of 25m, which is approximately 0.147 seconds.

To know more about speed refer here:

https://brainly.com/question/28060745#

#SPJ11

Since the force is zero, the boat does not move. Therefore, the distance the boat moves away from the pier as Jake walks to the front of the boat is zero.  

To solve this problem, we need to use the conservation of linear momentum.

The total mass of the boat and the two brothers is given by:

M = m_boat + m_brother_1 + m_brother_2

= 83.0 kg + 59.5 kg + 50.0 kg

= 192.5 kg

The total momentum of the system before Jake starts walking is given by:

P_total = m_boat * v_boat + m_brother_1 * v_brother_1 + m_brother_2 * v_brother_2

= (83.0 kg) * (v_boat) + (59.5 kg) * (0) + (50.0 kg) * (0)

= 83.0 kg * v_boat + 297.5 kg * 0

= 210.5 kg * v_boat

v_boat is the velocity of the boat, measured in the same direction as the displacement of the boat.

Since the boat is stationary initially, v_boat = 0.

Now, we can apply Newton's second law to the system. The force exerted on the boat by Jake, who is walking towards the front of the boat, is equal to the momentum of the boat relative to Jake. Since Jake is walking away from the pier, the momentum of the boat relative to Jake is negative. Therefore, we have:

F = P_relative - P_initial

= -210.5 kg * v_boat - 297.5 kg * 0

= -408.0 kg * 0

= 0 N

Learn more about force Visit: brainly.com/question/30236242

#SPJ4

The distance to the epicenter of an earthquake can be calculated by measuring the S-P interval and using a travel-time graph. Data from multiple seismographs are used to triangulate the exact location of the epicenter.

To calculate the distance to the epicenter of an earthquake, the following steps can be followed:

Step 1: Determine the time interval between the arrival of the P-wave and S-wave. This time interval is called the "S-P interval" and can be measured using a seismograph.

Step 2: Use a travel-time graph, which plots the S-P interval against the distance to the epicenter, to find the distance to the epicenter. The graph provides a curve of expected S-P intervals for different distances. By measuring the S-P interval, we can determine the distance from the curve.

Step 3: Repeat the process using data from at least three different seismographs located at different locations to triangulate the exact location of the epicenter.

In summary, the distance to the epicenter of an earthquake can be calculated by measuring the S-P interval and using a travel-time graph to find the corresponding distance. This process is repeated using data from multiple seismographs to triangulate the exact location of the epicenter.

To know more about epicenter refer here:

https://brainly.com/question/28136716#

#SPJ11

Yes, the drawing is to scale an accurate scale model. The artist shows how the diameters compare as well as the distances from the Sun in AU's. The correct answer is C) Yes, the drawing is to scale.

The artist shows how the diameters compare as well as the distances from the Sun in AU's. However, it is important to note that neither the distances from the Sun nor the size of the planets are drawn to scale. Both are too small according to actual distances and diameters.

Overall, the model accurately represents the relative distances of each planet from the Sun, but it is not an accurate representation of the actual distances and sizes of the planets in our solar system. Since the model uses AU's to represent distances between the planets and the Sun, it provides an accurate representation of the relative distances within the solar system. The correct answer is C) Yes, the drawing is to scale.

For more about scale model:

https://brainly.com/question/19512201

#SPJ11

The equilibrium of the plank is maintained: when the net torque and net force are both equal to zero.

In this scenario, we have a uniform plank AB with a mass of 20 kg. It is supported horizontally at points 20 cm and 70 cm from point A. The plank is in equilibrium when additional masses of 50 kg and 70 kg are suspended at points A and B, respectively. Furthermore, a weight of 100 N is suspended at the 40 cm mark from point B.

To maintain equilibrium, the net torque and the net force on the plank must be zero. The torque produced by each mass and weight on the plank can be calculated as the product of the force and the distance from the pivot point. The force due to the mass of the plank and the suspended masses can be calculated using the formula F = mg, where m is the mass and g is the acceleration due to gravity (approximately 9.81 m/s^2).

The torque balance equation will involve the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight. By calculating these torques and setting the net torque to zero, we can analyze the equilibrium state of the plank. Additionally, we need to ensure that the net force acting on the plank is also zero, which can be confirmed by summing the forces due to each mass and weight and setting the total equal to zero.

In summary, the equilibrium of the plank is maintained when the net torque and net force are both equal to zero. This involves balancing the torques produced by the 20 kg plank, the 50 kg and 70 kg suspended masses, and the 100 N weight, as well as the forces acting on the plank.

To know more about net torque, refer here:

https://brainly.com/question/30284628#

#SPJ11

The force required to pull the spring 0.412 m from its equilibrium position is 1004.41 N.

The force required to pull a spring can be calculated using Hooke's law, which states that the force exerted by a spring is proportional to its displacement from its equilibrium position.

The formula for Hooke's law is F = -kx, where F is the force exerted, k is the spring constant, and x is the displacement from the equilibrium position.

Substituting the given values into the formula, we have: F = -kx, F = -(2441.5 N/m)(0.412 m), F = -1004.41 N

The negative sign indicates that the force is in the opposite direction of the displacement, meaning that the force is pulling the spring back towards its equilibrium position. Therefore, the force required to pull the spring 0.412 m from its equilibrium position is 1004.41 N.

To know more about Hooke's law, refer here:

https://brainly.com/question/29126957#

#SPJ11

An example of vertical motion in Galileo description is dropping a feather and a rock from the same height.

Through his observations employing a telescope that he designed and built himself, Galileo arrived at the conclusion that the Sun was the center of our solar system, thereby rejecting the orthodox notion held then that Earth was at the universe's epicenter. The theory of heliocentrism forward by him incited opposition and consternation from Roman Catholic Church which firmly believed in geocentrism as being valid astronomy.

In one of his well-known experiments, Galileo proposed that a feather and rock would fall to earth equally fast because of gravity if we disregard air resistance. Comparable acceleration resulting from gravitational pull, with an approximate value of 9.8 meters per second squared (m/s^2) close to the Earth's surface, explains why both objects display identical conduct.

Learn about Galileo's description here https://brainly.com/question/840914

#SPJ1

Passive solar energy involves using natural processes to capture and distribute the Sun's energy.

This technique utilizes building design features, such as window placement and materials, to allow sunlight to enter the space and provide heating, lighting, and ventilation without any need for mechanical or electrical systems.

One example of passive solar design is the use of south-facing windows to capture sunlight during the winter, while shading devices prevent overheating during the summer.

By reducing the need for artificial heating and cooling, passive solar energy can reduce energy costs and environmental impact while providing a comfortable and sustainable living or working space.

To know more about solar energy, refer here:

https://brainly.com/question/9704099#

#SPJ11

The work done in pulling the pallet 125 m across the floor with a cable making an angle of 45° with the floor and a force of 1150 N is 96,875 J.

To calculate the work done, we need to use the formula W = Fdcosθ, where F is the force applied, d is the distance moved, and θ is the angle between the force and the direction of motion.

In this case, the force exerted on the pallet is 1150 N, and the distance moved is 125 m. The angle between the force and the direction of motion is 45°.

So, W = (1150 N)(125 m)cos45° = 96,875 J

Therefore, the work done in pulling the pallet 125 m across the floor with a cable making an angle of 45° with the floor and a force of 1150 N is 96,875 J.

To know more about force , refer here:

https://brainly.com/question/13191643#

#SPJ11

Nakisha can systematically investigate her question and determine the conditions under which: mixing phenolphthalein with other solutions will create a pink color

To determine whether mixing other solutions with phenolphthalein will also create a pink color, Nakisha could use the scientific inquiry process as follows:

1. Ask a question: Nakisha's question is whether mixing other solutions with phenolphthalein will create a pink color.

2. Conduct background research: Nakisha can research the properties of phenolphthalein and its reactions with different types of solutions, such as acids, bases, or neutral substances.

3. Form a hypothesis: Based on the background research, Nakisha can form a hypothesis about the possible outcomes when mixing phenolphthalein with various solutions. For example, she might hypothesize that phenolphthalein will only turn pink when mixed with basic solutions.

4. Design and perform an experiment: Nakisha can set up a controlled experiment where she tests different solutions with phenolphthalein. She can use a variety of solutions, such as hydrochloric acid, acetic acid, sodium hydroxide, ammonia, and distilled water, and observe their reactions with phenolphthalein.

5. Record and analyze data: Nakisha should carefully record the color changes that occur when mixing phenolphthalein with each solution. She can then analyze this data to determine which types of solutions cause a pink color change.

6. Draw conclusions: Based on her experimental results, Nakisha can draw a conclusion about which types of solutions create a pink color when mixed with phenolphthalein. If her hypothesis is supported, she can determine that only basic solutions create a pink color with phenolphthalein.

7. Communicate results: Finally, Nakisha can share her findings with others in the scientific community, either through a lab report, presentation, or published article.

By following the scientific inquiry process, Nakisha can systematically investigate her question and determine the conditions under which mixing phenolphthalein with other solutions will create a pink color.

To know more about phenolphthalein, refer here:

https://brainly.com/question/14037314#

#SPJ11

According to the theory of special relativity, the speed of light is constant in all inertial frames of reference. Therefore, the speed of the pulses of light measured by the spaceship will be the same as the speed of light, c.

However, since the spaceship is moving towards the distant star at 0.90c, the relative speed of the spaceship with respect to the pulses of light will be c - 0.90c = 0.10c. This means that the pulses of light will approach the spaceship at a speed of 0.10c.

To understand this concept more clearly, imagine you are standing still and someone throws a ball towards you at 10 mph. The relative speed of the ball with respect to you is 10 mph. Now, if you start walking towards the ball at 5 mph, the relative speed of the ball with respect to you will be 10 mph - 5 mph = 5 mph. Similarly, in the case of the spaceship, the relative speed of the pulses of light with respect to the spaceship will decrease as the spaceship moves towards the source of the light.

In conclusion, the pulses of light will approach the spaceship at a speed of 0.10c from the spaceship's point of view. This concept is important in understanding the effects of relative motion on the measurement of physical phenomena, and it has implications for our understanding of the nature of space and time.

To know more about special relativity refer here

https://brainly.com/question/12717449#

#SPJ11

Answer and Explanation:

According to the principle of maximum density, water has its highest density at 4°C. This means that 1kg of water will occupy minimum space at a temperature of 4°C. At this temperature, the volume of water is at its lowest, and any further cooling or heating will cause it to expand.

This principle is due to the unique properties of water molecules. As the temperature decreases from room temperature, the molecules begin to slow down and move closer together. However, below 4°C, hydrogen bonding between the molecules begins to dominate, causing them to form a crystal-like structure and expand.

At 0°C, water freezes and expands by about 9%, making it less dense than liquid water. At 100°C, water boils and turns into steam, which occupies much more space than liquid water. At -4°C, the water is still in a liquid state but is not at its maximum density.

In conclusion, the correct answer is 4°C, as this is the temperature at which 1kg of water will occupy minimum space.

1 kg of water will occupy minimum space of 1 m³at 25°C.

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. that's why oil floats on the water)

To know more about Density :

https://brainly.com/question/29775886

#SPJ2.

Adding a 50 V battery to a circuit can potentially increase the intensity of the light bulbs, assuming the bulbs are designed to operate at a higher voltage.

The intensity of light bulbs is generally related to the power (P) consumed by the bulbs. In an electrical circuit, the power can be calculated using the formula:

P = V² / R

Where V is the voltage and R is the resistance of the bulb.

By increasing the voltage (V), the power consumed by the bulbs may increase if the resistance (R) remains constant. A higher power output generally results in increased brightness and intensity of the light bulbs.

However, it's important to note that if the light bulbs are not designed to handle the increased voltage, it could lead to overloading and potential damage.

Therefore, it is crucial to ensure that the light bulbs are compatible with the increased voltage before making any modifications to the circuit.

To know more about intensity refer here

https://brainly.com/question/17583145#

#SPJ11

The deceleration of the body is -1 m/s^2, the distance between X and M is 200m, and the time taken by the body to move from X to M is 20 seconds.

Kinematic equations are a set of mathematical equations used to describe the motion of an object in terms of its displacement, velocity, and acceleration, given certain initial conditions.

To solve this problem, we can use the following kinematic equations of motion:

v = u + at

s = ut + (1/2)at^2

v^2 = u^2 + 2as

Where:

u = initial velocity

v = final velocity

a = acceleration or deceleration

t = time taken

s = distance covered

i) To find the deceleration of the body:

From the first equation, we have:

v = u + at

20 = 40 + a(20)

a = (20-40)/20 = -1 m/s^2

Therefore, the deceleration of the body is -1 m/s^2.

ii) To find the distance between X and M:

We know that the total distance covered from P to M is:

s = 200m + distance between X and M

When the body is at rest at point M, we can use the third equation:

v^2 = u^2 + 2as

Since the body is brought to rest, the final velocity is zero:

0 = 20^2 + 2(-1)s

s = 200 m

Therefore, the distance between X and M is 200m.

iii) To find the time taken by the body to move from X to M:

From the second equation, we have:

s = ut + (1/2)at^2

Since the initial velocity is 20m/s and the final velocity is zero, we have:

s = (1/2)at^2

200 = (1/2)(-1)t^2

t^2 = 400

t = 20 seconds

So, the time taken by the body to move from X to M is 20 seconds.

Therefore, 200 meters separate X and M, the body is decelerating at -1 m/s^2, and it takes the body 20 seconds to get from X to M.

To learn more about Newton's law of motion click:

brainly.com/question/29775827

#SPJ1

Without a specific circuit provided, it is difficult to estimate how the phase difference would change when the value of ω changes from zero to infinity.

The phase difference is dependent on the specific circuit components and their respective impedances.

In general, the phase difference between voltage and current in a circuit with inductive or capacitive elements can change significantly as the frequency (or angular frequency ω) changes.

For example, in a simple series circuit consisting of a resistor and an inductor, the phase difference between the voltage and current is zero at DC (ω=0) and approaches 90 degrees as ω approaches infinity.

In contrast, for a series circuit with a resistor and capacitor, the phase difference starts at 90 degrees at DC and approaches zero as ω approaches infinity.

Therefore, it is important to analyze the specific circuit and its components to determine how the phase difference would change as ω changes from zero to infinity.

To know more about phase difference refer here

brainly.com/question/14594671#

#SPJ11

The best way for someone to identify a suitable career is a subjective matter and can vary from person to person. However, a common approach involves a combination of self-reflection, exploration, and research. Some recommended steps to identify a suitable career include:

1. Self-reflection: Brainstorm a list of things you enjoy doing and are passionate about. Consider your interests, hobbies, skills, and values. Think about what brings you satisfaction and a sense of fulfillment.

2. Skills assessment: Identify your strengths and areas where you excel. Assess your natural abilities, talents, and acquired skills. Determine what tasks or activities you perform well and enjoy doing.

3. Exploration and research: Explore different career options that align with your interests and skills. Research various industries, job roles, and career paths. Gather information about job responsibilities, required qualifications, growth prospects, and work-life balance.

4. Gain experience: Seek opportunities to gain hands-on experience in fields or roles you are considering. This can be through internships, part-time jobs, volunteering, or shadowing professionals. Practical experience can help you gain insight into the day-to-day realities of different careers.

5. Networking and informational interviews: Connect with professionals working in fields of interest. Conduct informational interviews to learn more about their career paths, experiences, and advice. Networking can provide valuable insights and potential opportunities.

6. Professional aptitude tests: Consider taking aptitude tests or career assessments that evaluate your strengths, interests, and personality traits. These tests can provide additional guidance and suggestions for suitable career paths. However, remember that they should be used as a tool and not as the sole decision-making factor.

It is important to note that selecting a suitable career is a personal decision, and what works for one person may not work for another. It's essential to consider your individual aspirations, values, and long-term goals when making career choices.

Seek advice from trusted mentors or career counselors who can provide guidance based on your specific circumstances and help you make an informed decision.

To know more about career refer here

https://brainly.com/question/8825832#

#SPJ11

The magnitude of the normal force is 147 N.

The  magnitude of Force Friction is 73.5 N.

The acceleration of the box is  0.21 m/s².

The magnitude of the normal force is calculated as follows;

Fn = mg

where;

Fn = 15 kg x 9.8 m/s²

Fn = 147 N

The  magnitude of Force Friction is calculated as follows;

Ff = μFn

Ff = 0.5 x 147 N

Ff = 73.5 N

The acceleration of the box is calculated as follows;

F - Ff = ma

a = (F - ff)/m

a = (100 x cos40  -  73.5 ) / 15

a = 0.21 m/s²

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

A lightning strike with a duration of 0.05 seconds and a 100-coulomb energy transfer has a current of 2000 amperes.

The amount of current, in amperes, in a lightning stroke that lasts 0.05 seconds and transfers 100 coulombs can be calculated using the formula I = Q/t, where I represents the current in amperes, Q represents the charge in coulombs, and t represents the time in seconds.

So, substituting the given values in the formula, we get:

I = 100 coulombs / 0.05 seconds

I = 2000 amperes

Therefore, the lightning stroke that lasts 0.05 seconds and transfers 100 coulombs has a current of 2000 amperes. It is important to note that lightning strikes can have varying currents, ranging from tens of thousands to hundreds of thousands of amperes, depending on the size and intensity of the storm. In fact, lightning is one of the most powerful natural phenomena on Earth, capable of generating enormous amounts of energy in just a few microseconds. As such, it is important to take appropriate safety precautions during a lightning storm to minimize the risk of injury or damage.

Know more about lightning here:

https://brainly.com/question/16854009

#SPJ11

The age of the buildings at the site is approximately 17,190 years. The correct option is 17190 years.

To determine the age of the wooden buildings using radiocarbon dating, we can use the half-life formula:

N = N₀ * (1/2)^(t/T)

where:
- N is the current ratio of carbon-14 to carbon-12 (0.125 ppt)
- N₀ is the initial ratio of carbon-14 to carbon-12 when the trees were cut down (1 ppt)
- t is the time elapsed (the age of the buildings, which we want to find)
- T is the half-life of carbon-14 (5,730 years)

We can rearrange the formula to solve for t:

t = T * log2(N₀/N)

Plugging in the given values:

t = 5730 * log2(1/0.125)
t = 5730 * log2(8)
t = 5730 * 3
t = 17,190 years

So, the correct option is 17190 years.

For more about buildings:

https://brainly.com/question/23099874

#SPJ11

The power dissipated by the bathroom heater is 1.26 kW or 1260 W.

Given data:
1. Current (I) = 10.5 A
2. Potential difference (V) = 120 V

Unknown:
1. Power (P)

Equation used: P = IV

Now, let's solve the problem step-by-step:

Step 1: Recall the formula for power, which is P = IV.

Step 2: Plug in the given values for current (I) and potential difference (V) into the equation.

P = (10.5 A) × (120 V)

Step 3: Perform the multiplication to calculate the power.

P = 1260 W

Step 4: Check the significant digits. Both given values have three significant digits, so our answer should also have three significant digits.

For more about power dissipated:

https://brainly.com/question/12803712

#SPJ11

The work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.

The work done on a spring is given by the equation W = (1/2)[tex]kx^{2}[/tex], where W is the work done, k is the spring constant, and x is the distance stretched. Substituting the given values, we get: W = (1/2)(160 N/m)[tex](0.50m)^{2}[/tex], W = 20 J

Therefore, the work done on the slinky to stretch it 0.50 meters horizontally across a table is 20 J.

The work done is equal to the energy stored in the spring as potential energy due to its deformation.

When the slinky is stretched, the work done on it is stored as potential energy in the spring, which can be converted back to work when the spring is released.

To know more about potential energy, refer here:

https://brainly.com/question/24284560#

#SPJ11

The new pressure of the oxygen is 128 kPa. The correct answer is (a).

In the given problem, we are given the initial pressure, volume, and temperature of oxygen in a bottle and asked to find the new pressure of oxygen after the bottle breaks open and leaks into the outer container. We can use the combined gas law equation to find the new pressure of oxygen. The volume and temperature of the oxygen changes from 0.3 L and 290 K to 1.5 L and 370 K, respectively, while the amount and state of the oxygen remain constant. Using the combined gas law equation P₁V₁ / T₁ = P₂V₂ / T₂, we can find the new pressure of the oxygen:

P₂ = (P₁ x V₁ x T2) / (V₁ x T₁)

P₂ = (500 kPa x 0.30 L x 370 K) / (1.5 L x 290 K)

P₂ = 128 kPa

To know more about temperature, here

https://brainly.com/question/11464844

#SPJ4

The author says "This is equivalent to taking a long shower every day for two-and-a-half weeks" to D. give the reader an example of how much water is wasted.

The author is utilizing this corresponding to give the lecture on an idea of in what way or manner much water is needed to start a farm.

By equating it to right a long shower every day for two-and-a-half weeks, me is showing that offset a farm requires a meaningful amount of water, which is a valuable means that bear not be wasted. The contrasting also helps to stress the importance of water preservation and the need for tenable farming practices that use water capably.

Learn more about water  from

https://brainly.com/question/1313076

#SPJ1

The author says "This is equivalent to taking a long shower every day for two-and-a-half weeks" to A. show the reader how much water is needed to start a farm. B. convince readers to give up taking long showers every day. C. inform the reader about how wonderful long showers are. D. give the reader an example of how much water is wasted.

The length of the pipe needed to play the same fundamental frequency as the guitar string is 86.7 cm.

To find the length of the pipe needed to play the same fundamental frequency as the guitar string, we need to use the formula:

f = (n/2L) * v

Where f is the fundamental frequency, L is the length of the pipe, n is the harmonic number (for the fundamental frequency, n=1), and v is the speed of sound in air.

First, we need to find the fundamental frequency of the guitar string. We can use the formula:

f = (1/2L) * √(T/m)

Where T is the tension in the string, m is the mass per unit length of the string, and L is the length of the string.

Using the given values, we can calculate the fundamental frequency of the guitar string as:

f = (1/2*0.3) * √(78/0.004) = 196.14 Hz

Now we can use this frequency and the speed of sound in air to find the length of the pipe needed to play the same frequency:

196.14 = (1/2L) * 340

Solving for L, we get:

L = (1/2) * 340 / 196.14 = 0.867 meters or 86.7 cm

To learn more about string click on,

https://brainly.com/question/29360985

#SPJ4