Stoichiometry Assessment online
If I perform this reaction by combining 125.0 grams of Pb(SO4)2 with an excess of LiNO3, how much Li2SO4 will I be able to make
O 145.50 g

The number of moles present in a sample of gas within given parameters is C) 0. 0238 mol.

To calculate the number of moles in a gas sample, we need to use the ideal gas law equation:

PV = nRT

where P is the pressure in kPa, V is the volume in liters, n is the number of moles, R is the gas constant (0.0821 L·atm/mol·K or 8.31 J/mol·K), and T is the temperature in Kelvin (K = °C + 273.15).

First, we need to convert the temperature from Celsius to Kelvin:

T = -15.0 °C + 273.15 = 258.15 K

Now we can plug in the values:

(88.9 kPa)(0.575 L) = n(0.0821 L·atm/mol·K)(258.15 K)

Simplifying the equation, we get:

n = (88.9 kPa)(0.575 L)/(0.0821 L·atm/mol·K)(258.15 K)

n = 0.0238 mol

Therefore, the answer is C) 0.0238 mol.

To know more about the ideal gas equation, click below.

https://brainly.com/question/20897725

#SPJ11

The balanced molecular chemical equation for the reaction below is as follows;

H₂SO₄(aq) + 2CsOH(aq) → Cs₂SO₄(aq) + 2H₂O(l)

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

According to this question, a chemical equation occurs between sulfuric acid and caesium hydroxide to produce caesium sulphate and water.

The equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

The balanced chemical equation of the reaction is as illustrated above.

Learn more about chemical equation at: https://brainly.com/question/28294176

#SPJ1

The solubility of CO₂ in water at 263.4 kPa is 1.064 g/100 ml water.

We can use Henry's law to calculate the solubility of CO₂ in water at a different pressure. Henry's law states that the amount of gas dissolved in a liquid is directly proportional to the partial pressure of the gas above the liquid. Thus, we can set up the following equation:

We are given the solubility of CO₂ at a reference pressure of 101.3 kPa, which is 0.348 g/100 ml water. We want to find the solubility at a new pressure of 263.4 kPa. We can rearrange the equation above to solve for the solubility at the new pressure:

We know that the temperature is constant at 0°C, so we can assume that the solubility is directly proportional to the partial pressure. Thus, we can set up a ratio:

Plugging in the given values, we get:

Solving for the solubility at the new pressure, we get:

Therefore, the solubility of CO₂ in water at a pressure of 263.4 kPa is 1.064 g/100 ml water.

To learn more about solubility, here

https://brainly.com/question/28170449

#SPJ4

The freezing point of 4.09 kg of water with 186.4 g of Ca[tex]Br_2[/tex] is -0.4244 °C.

To calculate the freezing point of the water with the given amount of Ca[tex]Br_2[/tex], we need to use the formula for freezing point depression:

ΔTf = Kf × molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant, and molality is the concentration of solute particles in the solution.

First, we need to calculate the molality of the solution:

m = moles of solute / mass of solvent (in kg)

We know the mass of water is 4.09 kg, and the molar mass of Ca[tex]Br_2[/tex] is 199.89 g/mol. Therefore, the number of moles of CaBr2 is:

n = 186.4 g / 199.89 g/mol = 0.932 mol

The mass of water is 4.09 kg = 4090 g, so the molality of the solution is:

m = 0.932 mol / 4.09 kg = 0.2279 mol/kg

Now we can use the freezing point depression constant for water to calculate the change in freezing point:

ΔTf = 1.86 °C/m × 0.2279 mol/kg = 0.4244 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

Freezing point = 0 °C - 0.4244 °C = -0.4244 °C

Therefore, the freezing point of 4.09 kg of water with 186.4 g of CaBr2 is -0.4244 °C.

To know more about freezing point calculation:

https://brainly.com/question/31432159

#SPJ11

Here are the molecular geometries for each molecule after drawing their Lewis structures:

1. HICl₄: The central I is surrounded by six electron pairs - four bonding pairs and two lone pairs. Therefore, its molecular geometry is octahedral.

2. CH₂Cl₂: The central atom C has 2 single bonds with 2 H atoms and 2 single bonds with 2 Cl atoms, with no lone pairs. The molecular geometry is also tetrahedral.

3. SF₂: The central atom S has 2 single bonds with 2 F atoms and 2 lone pairs. This gives the molecule a bent molecular geometry.

4. PCl₃: The central atom P has 3 single bonds with 3 Cl atoms and 1 lone pair. This results in a trigonal pyramidal molecular geometry.

To predict the molecular geometry using VSEPR theory, we need to first draw the Lewis structure for each molecule.

1. HICl₄:

The Lewis structure for HICl₄ is as follows:

H-I-Cl
  |
  Cl
  |
  Cl

According to VSEPR theory, the molecule has an octahedral shape. The central iodine atom is surrounded by six electron pairs - four bonding pairs and two lone pairs. The bonding pairs repel each other and try to move as far apart as possible, resulting in an octahedral shape.

2. CH₂Cl₂:

The Lewis structure for CH₂Cl₂ is as follows:

H- C - H
   |  
   Cl
   |  
   Cl

According to VSEPR theory, the molecule has a tetrahedral shape. The central carbon atom is surrounded by four electron pairs - two bonding pairs and two lone pairs. The bonding pairs repel each other and try to move as far apart as possible, resulting in a tetrahedral shape.

3. SF₂:

The Lewis structure for SF₂ is as follows:

F
|\
S--F
|/
F

According to VSEPR theory, the molecule has a bent shape. The central sulfur atom is surrounded by three electron pairs - two bonding pairs and one lone pair. The bonding pairs repel each other and try to move as far apart as possible, resulting in a bent shape.

4. PCl₃:

The Lewis structure for PCl₃ is as follows:

Cl
  |
Cl - P - Cl
  |

According to VSEPR theory, the molecule has a trigonal pyramidal shape. The central phosphorus atom is surrounded by four electron pairs - three bonding pairs and one lone pair. The bonding pairs repel each other and try to move as far apart as possible, resulting in a trigonal pyramidal shape.

Learn more about VSEPR theory at https://brainly.com/question/17177984

#SPJ11

The area of one tire in contact with the road is approximately 378 square centimeters.

To solve this problem, we need to use the formula:

Pressure = Force/Area

We can rearrange this formula to solve for the area:

Area = Force/Pressure

First, we need to convert the weight of the truck from pounds to newtons, since pressure is typically measured in newtons per square meter. We can use the conversion factor 1 pound = 4.44822 newtons.

Weight of truck = 7280 pounds x 4.44822 newtons/pound
Weight of truck = 32,355.26 newtons

Now we can plug in the values for force and pressure:

Area = 32,355.26 newtons / 87.5 pounds per square centimeter

To convert pounds per square centimeter to newtons per square meter, we need to use the conversion factor 1 pound per square centimeter = 98,066.5 newtons per square meter.

Area = 32,355.26 newtons / (87.5 pounds per square centimeter x 98,066.5 newtons per square meter per pound per square centimeter)

Area = 0.0378 square meters

Finally, we can convert square meters to square centimeters by multiplying by 10,000:

Area = 0.0378 square meters x 10,000 square centimeters per square meter

Area = 378 square centimeters

Therefore, the area of one tire in contact with the road is approximately 378 square centimeters.

Know more about Pressure here:

https://brainly.com/question/1890275

#SPJ11

In fire, the energy released is slower as compared to the explosion in which the energy released is faster and more damaging.

Fires and Explosions are phenomena that releases a high amount of heat and light into their surrounding. Both of them causes the surroundings to burn down if they are not performed or caused in a controlled environment.

However, the main difference between the two is the rate at which the energy is released. In a fire, the energy which is released be it heat energy or light energy, the energy is released slowly through combustion as compared to explosions. Fires basically involve a sustained combustion process.

In an explosion the energy that is released at an extreme rate, it creates shockwaves that can cause damage significantly to its surrounding. Explosions are a one-time event.

Learn more about Combustion at:

https://brainly.com/question/28469125

#SPJ1

The phrase "the molarity of a solution" refers to the concentration of a solution and is defined as the number of moles of solute dissolved in one liter of solution. It is denoted by the symbol "M" and has units of moles per liter (mol/L).

Molarity is a commonly used unit of concentration in chemistry and is particularly useful in stoichiometry calculations, as it allows for the conversion of the volume of a solution to the number of moles of solute present.

For example, a solution with a molarity of 0.1 M contains 0.1 moles of solute per liter of solution. If the volume of the solution is known, it is possible to calculate the number of moles of solute present and use this information to determine other important parameters, such as the mass of the solute or the volume of another solution required for a reaction.

To know more about Molarity refer to-

https://brainly.com/question/8732513

#SPJ11

2.64 x 10³ kJ of energy was produced.

To calculate the energy produced, we need to use the equation:

ΔE = q = nΔH

where ΔE is the energy produced (in joules), q is the heat absorbed or released (in joules), n is the number of moles of gas produced, and ΔH is the enthalpy change (in joules/mol).

First, we need to calculate the number of moles of CO2 produced:

PV = nRT

n = PV/RT

n = (1.18 atm)(60.0 L)/(0.0821 L·atm/mol·K)(298 K)

n = 2.59 mol

Next, we need to find the enthalpy change for the reaction that produced the CO2 gas. Let's assume it is -393.5 kJ/mol (the standard enthalpy of formation of CO2). Therefore, ΔH = -1020 kJ.

Finally, we can calculate the energy produced:

ΔE = q = nΔH

ΔE = (2.59 mol)(-1020 kJ/mol)

ΔE = -2640 kJ

Rounding to three significant figures, we get:

ΔE = -2.64 x 10³ kJ

Therefore, approximately 2.64 x 10³ kJ of energy was produced.

To learn more about moles, refer below:

https://brainly.com/question/31597231

#SPJ11

Answer: sodium

Explanation: alkali metals are the most reactive, and sodium is an alkali metal.

The molarity of the potassium hydroxide solution is 2.0 M.

We know that, Molarity (M) = moles of solute (mol) / volume of solution (L)

We have 0.0400 mol of KOH dissolved in 20.0 mL of water.

Volume of the solution= 20.0 mL = 20.0 / 1000 = 0.0200 L

Therefore, molarity = (0.0400 mol) / (0.0200 L) = 2.0 M

So, the molarity of the potassium hydroxide solution is 2.0 M.

Thus, option 3 is the correct answer.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ11

Writing a persuasive speech can be a powerful way to communicate your ideas and persuade your audience to take action. Here's an outline you can use to structure your speech on "Why more people connect more with nature":

I. Introduction

A. Attention-getter: Start with a thought-provoking statement or a compelling story that relates to the topic.

B. Thesis statement: Clearly state your position on the topic and preview the main points you will cover in the speech.

C. Credibility statement: Establish your credibility on the topic by sharing personal experiences, research, or expert opinions.

II. Body

A. Point 1: Connect with nature for physical health

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that nature is good for physical health.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

B. Point 2: Connect with nature for mental health

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that nature is good for mental health.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

C. Point 3: Connect with nature for environmental sustainability

Supporting evidence: Research studies, statistics, or expert opinions that support the idea that connecting with nature leads to more environmentally sustainable behaviors.

Examples: Share personal stories or anecdotes that illustrate the benefits of connecting with nature.

III. Counterarguments and Rebuttal

A. Counterarguments: Anticipate and address potential objections or counterarguments to your position.

B. Rebuttal: Respond to the counterarguments and explain why your position is still valid.

IV. Conclusion

A. Summary: Restate your thesis statement and briefly summarize your main points.

B. Call to action: Encourage your audience to take action or change their behavior in some way related to the topic.

C. Final thought: End with a memorable statement or a call to action that leaves a lasting impression on your audience.

Remember, the key to a successful persuasive speech is to provide strong evidence and compelling examples to support your argument, address potential objections or counterarguments, and leave your audience with a clear call to action.

Good luck with your speech!

Learn more about Persuasive Speech Writing at

brainly.com/question/31297707

#SPJ4

Iodine-131 is a radioactive isotope of iodine that has a half-life of 8.0 days. This means that after 8.0 days, half of the original amount of iodine-131 will have decayed, and after another 8.0 days (a total of 16 days), half of the remaining iodine-131 will have decayed again.

The activity of a radioactive sample is a measure of the number of radioactive decays that occur in a given time period. It is measured in units of becquerels (Bq) or curies (Ci). One curie is equal to 3.7 x 10^10 becquerels.

In this case, we are given that the initial activity of the sample is 200 mCi (milliCuries). To find the activity after 16 days, we can use the following equation:

Activity = Initial activity x (1/2)^(t/half-life)
where t is the time elapsed and half-life is the half-life of the isotope.
Substituting the given values, we get:

Activity = 200 mCi x (1/2)^(16/8)
Activity = 200 mCi x (1/2)^2
Activity = 200 mCi x 0.25
Activity = 50 mCi

Therefore, the activity observed after 16 days is 50 mCi. This means that half of the original iodine-131 has decayed in that time period. It is important to note that the actual number of atoms remaining in the sample will also be halved after 16 days, but the activity will be reduced by a factor of four (since activity is proportional to the number of decays per unit time).

To know more about radioactive isotope  refer here

https://brainly.com/question/28039996#

#SPJ11

There are several factors that can contribute to the temperature difference between Los Angeles (LA) and New York (NY).

One of the most significant factors is their geographical location. LA is located on the west coast of the United States, close to the Pacific Ocean, which has a cooling effect on the city's climate.

In contrast, NY is situated on the east coast, where it is influenced by the warm Gulf Stream current, which has a warming effect on the city's climate.

Another factor that contributes to the temperature difference between the two cities is their elevation. LA is situated at a much lower elevation than NY, which means it is closer to sea level.

This can result in warmer temperatures as the air is denser at lower elevations and can hold more heat. In contrast, NY's higher elevation means that the air is thinner, and it can't hold as much heat, resulting in cooler temperatures.

Finally, the two cities have different climate zones. LA has a Mediterranean climate, which means it has warm, dry summers and mild, wet winters. In contrast, NY has a humid subtropical climate, which means it has hot, humid summers and cold, snowy winters.

These different climate zones can result in significant temperature differences between the two cities.

To learn more about air, refer below:

https://brainly.com/question/19368011

#SPJ11

The AH of the reaction is given as C. -571.6 kJ/mol

The enthalpy change of a reaction (∆H) can be calculated using the formula:

∆H = Σn ∆Hf°(products) - Σn ∆Hf°(reactants),

where n is the stoichiometric coefficient of each substance in the balanced equation.

If we apply this to the reaction of H2(g) and O2(g) forming H2O(l), we get ∆H = -571.6 kJ/mol, where ∆Hf°(H2(g)) = 0 kJ/mol and ∆Hf°(O2(g)) = 0 kJ/mol.

Read more about enthalpies here:

https://brainly.com/question/16985375

#SPJ1

Given the following reaction equation and the enthalpies of formation (∆Hf°) for each substance, what is the ∆H of the reaction?

2 H2(g) + O2(g) → 2 H2O(l)

∆Hf°(H2(g)) = 0 kJ/mol

∆Hf°(O2(g)) = 0 kJ/mol

∆Hf°(H2O(l)) = -285.8 kJ/mol

A. -5335.8 kJ/mol

B. -2815.8 kJ/mol

C. -571.6 kJ/mol

D. 580.7 kJ/mol

To determine the formula of the oxide formed and the percentage by mass of oxygen in the oxide, we need to first calculate the number of moles of Q and O₂ that react, using the given mass of Q and the volume, pressure, and temperature of O₂.

(i) Determining the formula of the oxide:

10.4 g of Q corresponds to 10.4 g / 52.0 g/mol = 0.2 mol of Q

Using the ideal gas law, we can calculate the number of moles of O₂ that reacted:

PV = nRT

n = PV/RT = (100 kPa)(7.48 dm³)/(0.0821 L·atm/(mol·K))(27°C + 273.15) = 0.279 mol of O₂

The balanced chemical equation for the formation of the oxide is:

Q + O₂ → QxOy

Assuming that the number of moles of Q and O₂ react in a simple whole-number ratio, we can use the number of moles of Q and O₂ to determine the empirical formula of the oxide.

Since the number of moles of Q and O₂ react in a 1:1 ratio, the empirical formula of the oxide is QO.

(ii) Calculating the percentage by mass of oxygen in the oxide:

The molar mass of QO is 52.0 g/mol + 16.0 g/mol = 68.0 g/mol

The mass of oxygen in 1 mole of QO is 16.0 g/mol / 68.0 g/mol × 100% = 23.53%

Therefore, the percentage by mass of oxygen in the oxide is 23.53%.

To know more about oxygen refer here

https://brainly.com/question/13905823#

#SPJ11

To find the molar mass of the unknown gas, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas. The ideal gas law is given by:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in kelvins.

We can rearrange this equation to solve for the number of moles:

n = PV / RT

We can then use the number of moles and the mass of the gas to find the molar mass:

M = m / n

where M is the molar mass, m is the mass of the gas, and n is the number of moles.

Plugging in the given values, we have:

P = 1.00 atm

V = 20.0 L

T = 273 K

m = 205 g

R = 0.0821 L·atm/(mol·K)

First, we need to calculate the number of moles of the gas:

n = PV / RT

n = (1.00 atm) x (20.0 L) / (0.0821 L·atm/(mol·K) x 273 K)

n = 0.911 mol

Next, we can use the number of moles and the mass of the gas to calculate the molar mass:

M = m / n

M = 205 g / 0.911 mol

M = 224.8 g/mol

Therefore, the molar mass of the unknown gas is approximately 224.8 g/mol.

To know more about temperature refer here

https://brainly.com/question/7510619#

#SPJ11

The blood alcohol concentration (BAC) of eight male subjects was measured after consuming 15 ml of ethanol, and a concentration function was derived. In this answer, we calculate the rate of change of BAC and interpret the results in the context of the problem.

After 6 minutes, the BAC was increasing at a certain rate, and half an hour later, it was decreasing at a different rate according to the model.

To find the rate of change of blood alcohol concentration (BAC) and interpret the results in the given context:

(a) We are asked to find how rapidly the BAC is increasing after 6 minutes. We can calculate the derivative of the concentration function with respect to time:

[tex]$c'(t) = 0.00225 e^{-0.0467t} - 0.0467 \cdot 0.00225 \cdot t \cdot e^{-0.0467t}$[/tex]

Evaluate c'(6) to find the rate of change at 6 minutes.

(b) For the rate of decrease half an hour later, we need to calculate c'(t) at t = 30 minutes.

After finding the values, we can interpret the answers by considering the units: (g/dl)/min represents the change in BAC concentration per minute.

The model predicts that the BAC will decrease by the respective amounts after the specified time periods.

To know more about the blood alcohol concentration refer here :

https://brainly.com/question/28245369#

#SPJ11

75% of the calves will be black, 25% will be red. The correct answer is C.

This is because the black bull is heterozygous for the black coat color gene (Bb), meaning it carries both a dominant black allele (B) and a recessive red allele (b).

The red cow is homozygous recessive for the red coat color gene (bb), meaning she carries two copies of the recessive red allele (b).

When these two parents are crossed, their offspring will inherit one allele from each parent to determine their coat color.

Since black is dominant over red, any calf that inherits a black allele (B) from the bull will have a black coat color.

Therefore, the possible offspring genotypes are BB (black), Bb (black), and bb (red).

BB: black (because it inherits a dominant black allele from the bull and a dominant black allele from the cow)

Bb: black (because it inherits a dominant black allele from the bull, but a recessive red allele from the cow)

bb: red (because it inherits a recessive red allele from each parent)

The probability of each genotype is 25% BB, 50% Bb, and 25% bb.

Since BB and Bb both result in black coat color, the predicted proportion of black calves is 75%. The predicted proportion of red calves is 25%.

to know more about genotypes refer here:

https://brainly.com/question/29156144#

#SPJ11

Avogadro's hypothesis states that equal volumes of gases at the same temperature and pressure contain equal numbers of molecules. In the given scenario, element X forms two different compounds with chlorine, which contain 50.68% and 74.75% chlorine, respectively. This illustrates the law of multiple proportions, which states that when two elements form more than one compound, the ratios of the masses of one element that combine with a fixed mass of the second element are in small whole numbers. In this case, the ratios of chlorine in the two compounds are 50.68:49.32 and 74.75:25.25, which are close to 1:1 and 3:1, respectively. These ratios are small whole numbers, and thus, the data illustrate the law of multiple proportions.

Let us discuss this in detail. First, let's state Avogadro's hypothesis and then illustrate the law of multiple proportions using the given data about element X and chlorine.

Avogadro's hypothesis states that equal volumes of all gases, under the same temperature and pressure, contain the same number of molecules. In other words, the number of molecules in a given volume is the same for all gases, as long as the temperature and pressure are constant.

Now, let's use the data provided to illustrate the law of multiple proportions. This law states that when two elements form more than one compound, the ratios of the masses of the second element that combine with a fixed mass of the first element will be in small whole numbers.

We are given two compounds of element X with chlorine:

1. Compound A contains 50.68% chlorine.
2. Compound B contains 74.75% chlorine.

First, let's assume that we have 100g of each compound. This would mean:

1. In compound A, there are 50.68g of chlorine and 49.32g of element X.
2. In compound B, there are 74.75g of chlorine and 25.25g of element X.

Next, find the ratio of chlorine to element X in both compounds:

1. Compound A: 50.68g Cl / 49.32g X = 1.027 (approximately)
2. Compound B: 74.75g Cl / 25.25g X = 2.961 (approximately)

Finally, find the ratio of the chlorine-to-X ratios in both compounds:

Ratio A to Ratio B: 2.961 / 1.027 = 2.88 (approximately)

The value of 2.88 is close to a whole number ratio of 3. This illustrates the law of multiple proportions, as the ratios of the masses of chlorine that combine with a fixed mass of element X in the two compounds are approximately in the small whole number ratio of 3:1.

Learn more about Avogadro's hypothesis at https://brainly.com/question/12779877

#SPJ11

The name of the branched alkene given in the question is:

6-ethyl-8-methyl-5-propyl-2-nonene or 6-ethyl-8-methyl-5-propylnon-2-ene

The naming of compound is obtained by the of IUPAC standard. This is illustrated below:

Thus, the IUPAC name for the branched alkene is:

6-ethyl-8-methyl-5-propyl-2-nonene or 6-ethyl-8-methyl-5-propylnon-2-ene

Learn more about IUPAC name:

https://brainly.com/question/23881815

#SPJ1

According to the question the mass of Ag₂S produced is 0.063 g.

Mass is a measure of the amount of matter an object contains. It is usually measured in kilograms and grams, and is an important concept in physics and chemistry. Mass is related to other properties such as weight, density, and momentum. Mass can be determined either by measuring the object's weight in a gravitational field or by measuring its inertia, which is its resistance to acceleration caused by a force.

The amount of Ag₂S produced can be calculated using the molar ratio of the reactants and products in the equation: 4Ag + 2 H₂S + O2 → 2 Ag₂S + 2 H₂O
First, calculate the amount of each reactant in moles:
Ag: 0.950 g / 107.87 g/mol = 0.00877 mol
H₂S: 0.140 g / 34.08 g/mol = 0.0041 mol
O2: 0.08000 g / 32.00 g/mol = 0.0025 mol
Then, use the molar ratio to calculate the amount of Ag2S produced:
2 Ag₂S = 0.00877 mol x (2 mol Ag₂S/4 mol Ag) = 0.0044 mol
Therefore, the mass of Ag₂S produced is 0.0044 mol x 143.7 g/mol = 0.063 g.

To learn more about mass
https://brainly.com/question/837939
#SPJ4

The mass of [tex]Ag_2S[/tex] obtained from the given mixture is 1.015 g.

The given chemical equation shows that 4 moles of Ag react with 2 moles of [tex]H_2S[/tex] and 1 mole of [tex]O_2[/tex] to form 2 moles of [tex]Ag_2S[/tex] and 2 moles of [tex]H_2O[/tex].

To determine the mass of [tex]Ag_2S[/tex] produced, we need to find out the limiting reactant first. The limiting reactant is the reactant that is completely consumed during the reaction and limits the amount of product that can be formed.

We can find the limiting reactant by calculating the amount of product that can be formed from each reactant.

For Ag:

The molar mass of Ag is 107.87 g/mol. The number of moles of Ag present is:

0.950 g / 107.87 g/mol = 0.00880 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00880 mol of Ag is:

0.00880 mol Ag x (2 mol [tex]Ag_2S[/tex] / 4 mol Ag) = 0.00440 mol [tex]Ag_2S[/tex]

For [tex]H_2S[/tex]:

The molar mass of [tex]H_2S[/tex] is 34.08 g/mol. The number of moles of [tex]H_2S[/tex] present is:

0.140 g / 34.08 g/mol = 0.00410 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00410 mol of [tex]H_2S[/tex] is:

0.00410 mol [tex]H_2S[/tex] x (2 mol [tex]Ag_2S[/tex] / 2 mol [tex]H_2S[/tex]) = 0.00410 mol [tex]Ag_2S[/tex]

For [tex]O_2[/tex]:

The molar mass of [tex]O_2[/tex] is 32.00 g/mol. The number of moles of [tex]O_2[/tex] present is:

0.08000 g / 32.00 g/mol = 0.00250 mol

The amount of [tex]Ag_2S[/tex] that can be formed from 0.00250 mol of [tex]O_2[/tex] is:

0.00250 mol [tex]O_2[/tex] x (2 mol [tex]Ag_2S[/tex] / 1 mol O2) = 0.00500 mol [tex]Ag_2S[/tex]

From the above calculations, we can see that the amount of [tex]Ag_2S[/tex] that can be formed from Ag is 0.00440 mol, from [tex]H_2S[/tex] is 0.00410 mol, and from [tex]O_2[/tex] is 0.00500 mol.

Since the smallest amount of [tex]Ag_2S[/tex] that can be formed is from [tex]H_2S[/tex], it is the limiting reactant. Therefore, the amount of [tex]Ag_2S[/tex] that can be formed is 0.00410 mol.

The molar mass of [tex]Ag_2S[/tex] is 247.80 g/mol. Therefore, the mass of [tex]Ag_2S[/tex] that can be formed is:

0.00410 mol [tex]Ag_2S[/tex] x 247.80 g/mol = 1.015 g [tex]Ag_2S[/tex] (rounded to three significant figures)

To learn more about mass

https://brainly.com/question/19694949

#SPJ4

Complete question:

What is the mass of Ag2S obtained from a mixture of 0.950 g Ag, 0.140 g of H2S, and 0.08000 g O2, according to the reaction 4Ag + 2H2S + O2 → 2Ag2S + 2H2O?

A 30% (w/v) solution of vitamin C was diluted to 200 ml. The weight/volume percent concentration of the resulting solution is 15%.

To find the weight/volume percent concentration after diluting, we need to use the formula:

C1V1 = C2V2

Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Given:

C1 = 30% (w/v)

V1 = 100 mL

V2 = 200 mL

Using the formula, we can solve for C2:

C1V1 = C2V2

(30%)(100 mL) = C2(200 mL)

C2 = (30%)(100 mL) / (200 mL)

C2 = 15%

Therefore, the weight/volume percent concentration of the 100 mL of 30.0% (w/v) solution of vitamin C after diluting to 200 mL is 15%.

To know more about the vitamin C refer here :

https://brainly.com/question/29678198#

#SPJ11

The nuclide produced when boron-10 is bombarded with a neutron is lithium-7 besides a hydrogen-1 atom.

When boron-10 is bombarded with a neutron, it undergoes a nuclear reaction called neutron capture, which produces lithium-7 and a highly excited compound nucleus.

The compound nucleus then emits an alpha particle and a gamma ray to reach a stable state. This reaction is commonly used in nuclear reactors to produce tritium, which is a fuel for fusion reactions.

Lithium-7 is a stable isotope of lithium and is commonly used in nuclear reactions as a neutron detector.

To know more about nuclear reaction, refer here:

https://brainly.com/question/14648387#

#SPJ11

Sports drink helps to ensure that the body has enough sodium to maintain proper hydration levels and to prevent dehydration.

Electrolytes play a crucial role in various bodily functions, including muscle contractions, nerve impulses, and regulating fluid balance. This is important because the movement of ions across cell membranes is what generates electrical signals in the body. When a person perspires, the sweat that is released from their body contains both sodium and potassium ions. These ions are lost through the process of sweating. However, the evaporation of sweat helps to cool the skin.

After a strenuous workout, it is important to replenish the lost electrolytes by drinking sports drinks that contain NaCl (sodium chloride) and KCl (potassium chloride). For example, a single 250-gram serving of one sports drink contains 0.055 grams of sodium ions. This replaces the lost electrolytes and help maintain proper fluid balance in the body.

In conclusion, after a strenuous workout, it is essential to replenish the lost sodium ions and potassium ions to maintain the body's electrolyte balance and ensure proper muscle and nerve function. Thus, Sports drinks containing NaCl and KCl can be an effective way to replace these ions and quench thirst.

The question should be:

When a person perspires (sweats), the body loses many sodium ions and potassium ions. The evaporation of sweat cools the skin. After a strenuous workout, people often quench their thirst with sports drinks that contain NaCl and KCl. A single 250gram serving of one sports drink contains 0. 055 gram of sodium ions.  How sports drinks containing NaCl and KCl can be an effective way to replace these ions?

To learn more about electrolytes visit:

https://brainly.com/question/17089766

#SPJ11

The mass of oxygen is 16 g

The mass of oxygen is 2.4 g

We know from the balanced reaction equation that;

[tex]CH_{4}[/tex]+ 2[tex]O_{2}[/tex] ---> [tex]CO_{2}[/tex] + 2[tex]H_{2} O[/tex]

Number of moles of[tex]CH_{4}[/tex] = 4.06 g/16 g/mol

= 0.25 moles

If 1 mole of [tex]CH{4}[/tex] reacts with 2 moles of[tex]O_{2}[/tex]

0.25 moles of [tex]CH_{4}[/tex] reacts with 0.25 * 2/1

= 0.5 moles

Mass of the oxygen = 0.5 moles * 32 g/mol

= 16 g

The balanced reaction equation is;

2S[tex]O_{3}[/tex](g)⇋2S[tex]O_{2}[/tex](g)+[tex]O_{2}[/tex](g)

Number of moles of sulfur trioxide = 12.3 g/80 g/mol

= 0.15 moles

If 2 moles of S[tex]O_{3}[/tex] produces 1 mole of oxygen

0.15 moles ofS[tex]O_{3}[/tex]will produce 0.15 * 1/2

= 0.075 moles

Mass of oxygen = 0.075 moles * 32 g/mol

= 2.4 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

There are 2.96 x 10^23 CN^-1 ions in the sample of 20.9 g of Ca(CN)2.

The first step to solving this problem is to calculate the number of moles of Ca(CN)2 in the sample:

[tex]moles of Ca(CN)2 = mass / molar mass\\moles of Ca(CN)2 = 20.9 g / (40.08 g/mol + 2 * 26.02 g/mol)\\moles of Ca(CN)2 = 0.2458 mol[/tex]

Next, we can use the stoichiometry of the reaction to find the number of moles of CN^-1 ions:

1 mol Ca(CN)2 → 2 mol CN^-1

[tex]moles of CN^{-1} = 2 * moles of Ca(CN)2 \\moles of CN^{-1 }= 2 * 0.2458 mol\\moles of CN^{-1} = 0.4916 mol[/tex]

Finally, we can convert the moles of CN^-1 ions to the number of ions using Avogadro's number:

1 mol CN^-1 → 6.022 x 10^23 ions

number of CN^-1 ions = moles of CN^-1 x Avogadro's number

number of CN^-1 ions = 0.4916 mol x 6.022 x 10^23 ions/mol

number of CN^-1 ions = 2.96 x 10^23 ions

To know more about Avogadro's number, here

brainly.com/question/11907018

#SPJ4

52 g of hydrogen will produce approximately 1154.75 liters of ammonia at STP.

To solve this problem, we need to use stoichiometry to determine the number of moles of ammonia produced from the given amount of hydrogen.

First, we can convert the mass of hydrogen to moles using its molar mass:

52 g H₂ x (1 mol H₂ ÷ 2.02 g H₂) = 25.74 mol H₂

Next, we can use the balanced chemical equation to determine the number of moles of ammonia produced per mole of hydrogen:

1 mol H₂ produces 2 mol NH₃

So, 25.74 mol H₂ will produce:

25.74 mol H₂ x (2 mol NH₃ ÷ 1 mol H₂) = 51.48 mol NH₃

Finally, we can use the ideal gas law to convert the number of moles of ammonia to its volume at standard temperature and pressure (STP):

51.48 mol NH₃ x (22.4 L/mol) = 1154.75 L NH₃

To learn more about hydrogen follow the link:

brainly.com/question/31018544

#SPJ4

the masses of the reactants and products after the reaction are:

- Blank g Li (lithium is completely consumed)
- 26.24 g O2 (some oxygen remains)
- 5.12 g Li2O (this is the amount formed in the reaction)

To solve this problem, we first need to write a balanced chemical equation for the reaction between lithium and oxygen:

4Li + O2 → 2Li2O

a) To determine which reactant is present in excess, we need to calculate the amount of product that can be formed from each reactant. We can do this by assuming that one of the reactants is limiting and calculating the amount of product that would be formed based on that assumption. Then, we compare that amount to the amount of product that would be formed based on the other reactant being limiting. The reactant that produces less product is the limiting reactant, and the other reactant is present in excess.

Let's assume that lithium is the limiting reactant. To calculate the amount of product that can be formed from 1.54 g of lithium, we need to convert the mass of lithium to moles using its molar mass:

1.54 g Li × (1 mol Li/6.941 g Li) = 0.222 mol Li

From the balanced chemical equation, we see that 4 moles of lithium react with 1 mole of oxygen to produce 2 moles of Li2O. Therefore, the amount of product that can be formed from 0.222 mol of Li is:

0.222 mol Li × (2 mol Li2O/4 mol Li) = 0.111 mol Li2O

Now, let's assume that oxygen is the limiting reactant. To calculate the amount of product that can be formed from 6.56 g of oxygen, we need to convert the mass of oxygen to moles using its molar mass:

6.56 g O2 × (1 mol O2/32 g O2) = 0.205 mol O2

From the balanced chemical equation, we see that 1 mole of oxygen reacts with 4 moles of lithium to produce 2 moles of Li2O. Therefore, the amount of product that can be formed from 0.205 mol of O2 is:

0.205 mol O2 × (2 mol Li2O/1 mol O2) = 0.410 mol Li2O

Comparing the two amounts of product, we see that the amount of product that can be formed from lithium is smaller than the amount that can be formed from oxygen. Therefore, lithium is the limiting reactant and oxygen is present in excess.

b) To calculate the number of moles of Li2O formed

from the reaction, we can use the amount of limiting reactant (0.222 mol Li) and the mole ratio between the limiting reactant and the product (2 mol Li2O/4 mol Li) to find the amount of product produced:

0.222 mol Li × (2 mol Li2O/4 mol Li) = 0.111 mol Li2O

c) After the reaction, all of the limiting reactant (lithium) will be consumed, and some of the excess reactant (oxygen) will be left over. To calculate the amount of oxygen left over, we can use the amount of excess reactant and the mole ratio between the limiting reactant and the excess reactant (4 mol Li/1 mol O2):

0.205 mol O2 × (4 mol Li/1 mol O2) = 0.820 mol Li

Since we started with 6.56 g of oxygen, and oxygen has a molar mass of 32 g/mol, we can convert the amount of oxygen left over to grams:

(0.820 mol O2) × (32 g O2/mol) = 26.24 g O2 remaining

To calculate the mass of Li2O formed, we can use the amount of product we calculated in part (b) and the molar mass of Li2O (45.88 g/mol):

0.111 mol Li2O × (45.88 g Li2O/mol) = 5.12 g Li2O formed

Finally, to calculate the mass of lithium consumed in the reaction, we can use the mass of lithium we started with (1.54 g) and subtract the amount of lithium that was not consumed:

1.54 g Li - 0.222 mol Li × (6.941 g Li/mol) = 0.998 g Li consumed

Therefore, the masses of the reactants and products after the reaction are:

- Blank g Li (lithium is completely consumed)
- 26.24 g O2 (some oxygen remains)
- 5.12 g Li2O (this is the amount formed in the reaction)
Visit to know more about reactants:-

https://brainly.com/question/6421464

#SPJ11

The molality of a solution formed by mixing 104 g of silver nitrate(Ag[tex]NO_3[/tex]) with 1. 75 kg of water is 0.350 mol/kg.

The molality of a solution is defined as the number of moles of solute per kilogram of solvent.

To calculate the molality of the solution formed by mixing 104 g of silver nitrate (AgNO3) with 1.75 kg of water, we first need to determine the number of moles of AgNO3 in the solution.

The molar mass of AgNO3 is 169.87 g/mol, so:

Number of moles of AgNO3 = 104 g / 169.87 g/mol = 0.6128 mol

Next, we need to determine the mass of water in the solution:

Mass of water = 1.75 kg = 1750 g

Finally, we can calculate the molality using the formula:

Molality = Number of moles of solute / Mass of solvent (in kg)

Molality = 0.6128 mol / 1.75 kg = 0.350 mol/kg

Therefore, the molality of the solution formed by mixing 104 g of AgNO3 with 1.75 kg of water is 0.350 mol/kg.

To know more about molality:

https://brainly.com/question/31576785

#SPJ11