Yes, the driver is accelerating when they put their foot on the gas pedal. Acceleration is the rate of change of velocity, which means that any change in speed or direction of motion is considered acceleration.
In this case, when the driver presses on the gas pedal, the car's velocity increases, causing a change in speed.
Therefore, the car is accelerating.
It's important to note that acceleration doesn't only refer to an increase in speed but can also refer to a decrease in speed or a change in direction, such as turning a corner.
To know more about velocity, refer here:
https://brainly.com/question/30559316#
#SPJ11
Please help me
how do elliptical galaxies typically compare to spiral galaxies?
a. elliptical are redder and rounder
b. elliptical are always much smaller
c. elliptical are bluer and flattened
d. elliptical are blue and rounded
e. elliptical galaxies are redder and flattened
Elliptical are redder and rounder than spiral galaxies. Option a is correct.
Elliptical galaxies are redder and rounder than spiral galaxies. Elliptical galaxies are so named because they have a shape that ranges from nearly spherical to highly elongated. They are generally redder than spiral galaxies, as they contain an older population of stars that are cooler and emit less blue light.
Spiral galaxies, on the other hand, are typically bluer due to their younger, hotter stars that emit more blue light. Elliptical galaxies also lack the distinctive spiral arms and central bulge of spiral galaxies, making them appear rounder in shape. The correct answer is (a).
To know more about galaxies, here
brainly.com/question/31361315
#SPJ4
How many grams are in 0. 02mol of Mg (25. 3g/mol)
There are 0.506 grams in 0.02 moles of Mg
To find the grams of Mg in 0.02 mol, you can use the formula:
grams = moles × molar mass
In this case, moles = 0.02 mol, and the molar mass of Mg = 25.3 g/mol. Plug in the values:
grams = 0.02 mol × 25.3 g/mol
grams = 0.506 g
So, there are 0.506 grams of Mg in 0.02 mol.
Visit https://brainly.com/question/31597231 to learn more about moles
#SPJ11
Max, the student standing 80 meters from the metronome, heard something different than all the other students. what did the clapping sound like to him
Max would hear the clapping sound at a slightly slower tempo compared to the other students.
Assuming that the speed of sound in air is approximately 343 m/s at room temperature and sea level, we can calculate the time it takes for the sound wave to reach Max's ears.
Using the equation distance = speed x time, we can rearrange it to get time = distance/speed. Plugging in the values, we get time = 80/343 = 0.233 seconds.
The metronome produces sound waves at a constant frequency. At a distance of 80 meters, the sound waves would have to travel a longer distance to reach Max's ears compared to the other students who are closer.
This means that the time it takes for the sound waves to travel from the metronome to Max's ears is longer than for the other students. As a result, Max would hear the clapping sound at a slightly slower tempo compared to the other students.
To know more about metronome, refer here:
https://brainly.com/question/25667592#
#SPJ11
An airplane and a freight train have the same momentum. The airplane has a mass of 21,700 kg and is traveling at 1,200 km/h. The train has a mass of 9,600,000 kg. What is the speed of the train?
Select one:
A: 2. 7 km/h
B:19. 0 km/h
C:25. 0 km/h
D: 5. 3 km/h
An airplane and a freight train have the same momentum, but the train's speed is much slower due to its much larger mass. The train's speed is approximately 9.8 km/h. The correct option is B.
The momentum of an object is the product of its mass and velocity. If two objects have the same momentum, their product of mass and velocity will be equal. We can use this principle to determine the speed of the freight train, given the momentum of the airplane.
The momentum of the airplane is:
[tex]p = m \times v[/tex]
[tex]p = 21,700\;kg \times (1,200\;km/h \times 1000\;m/km)[/tex]
p = 26,040,000 kg m/s
Since the momentum of the airplane and the train are equal, we can set their momentum equations equal to each other:
[tex]p = m \times v[/tex]
[tex]26,040,000\;kg\;m/s = 9,600,000\;kg \times v[/tex]
Solving for v, we get:
v = 26,040,000 kg m/s / 9,600,000 kg
v = 2.71 m/s
To convert the velocity from meters per second to kilometers per hour, we multiply by 3.6:
[tex]v = 2.71 m/s \times 3.6\;km/h/m[/tex]
v = 9.8 km/h
Therefore, the speed of the freight train is approximately 9.8 km/h, which is option B.
In summary, the momentum of the airplane is used to determine the velocity of the freight train, which can be calculated using the momentum equation. The velocity of the freight train is found to be approximately 9.8 km/h.
To know more about speed refer here:
https://brainly.com/question/28060745#
#SPJ11
Which one of the following instrument is most suitable for measuring thickness of
the physics book?
A. Meter rule ⃝ B. Vernier calipers ⃝
C. Measuring tape ⃝ D. Screw gauge ⃝
The most suitable instrument for measuring the thickness of a physics book is B. Vernier calipers, as they provide a higher degree of accuracy and precision compared to the other options.
One of the key advantages of Vernier calipers is their ability to provide measurements with a high level of precision. The Vernier scale allows for measurements to be read to a fraction of the smallest division on the main scale, significantly increasing the accuracy of the measurement.
This is especially useful when dealing with objects that have small dimensions or require precise measurements, such as the thickness of a book.
Furthermore, Vernier calipers often have a fine adjustment mechanism that enables the user to ensure a tight fit around the object being measured, minimizing any potential errors due to play or movement. This feature contributes to the overall accuracy of the measurements.
In comparison to other measuring instruments, such as a ruler or a tape measure, Vernier calipers provide a greater level of precision. Rulers, for example, typically have larger increments and are better suited for measuring longer distances rather than small thicknesses.
Tape measures, on the other hand, can be flexible and might not provide the same level of accuracy as Vernier calipers, especially when measuring thin objects.
To learn more about calipers, refer below:
https://brainly.com/question/13522392
#SPJ11
with the switch open, the potential difference across the capacitor in figure p23.44 is 10.0 v. after the switch is closed, how long will it take for the potential difference across the capacitor to decrease to 5.0 v?
It will take approximately 5.54 ms for the potential difference across the capacitor to decrease from 10.0 V to 5.0 V after the switch is closed.
The time constant of the circuit can be calculated using the formula RC, where R is the resistance in the circuit and C is the capacitance of the capacitor. From the diagram, we can see that the resistance in the circuit is 4.00 kΩ and the capacitance of the capacitor is 2.00 μF. Therefore, the time constant of the circuit is:
RC = 4.00 kΩ × 2.00 μF = 8.00 ms
When the switch is closed, the capacitor will start to discharge through the resistor. The rate at which the potential difference across the capacitor decreases is given by:
V = V0 × e^(-t/RC)
Where V is the potential difference across the capacitor at time t, V0 is the initial potential difference across the capacitor (10.0 V in this case), and e is the base of the natural logarithm.
To find the time it takes for the potential difference across the capacitor to decrease to 5.0 V, we can rearrange the equation to:
t = -RC × ln(V/V0)
Substituting the values given, we get:
t = -8.00 ms × ln(5.0 V/10.0 V) = 5.54 ms
To learn more about : decrease
https://brainly.com/question/2073174
#SPJ11
Select the statement that is NOT true
the magnetic field lines always cross one another
the magnetic field lines have the same strength
magnetic field lines flow from north to south
magnetic field lines are concentrated at the poles
The statement that is NOT true is: "the magnetic field lines always cross one another."
What is the true statement?Magnetic field lines do not cross one other since they depict the direction of the magnetic field at every position in space. The crossing of two field lines would cause the magnetic field to have two opposite directions at the same spot, which is not possible.
The magnetic field's direction is determined by the orientation of the magnetic dipole moment at its source of starting.
Learn more about Lines of force:https://brainly.com/question/30422314
#SPJ1
a 1.90-m-long wire having a mass of 0.100 kg is fixed at both ends. the tension in the wire is maintained at 21.0 n.
The fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and tension of 21.0 N is approximately 5.24 Hz.
Given the information provided, we have a 1.90-m-long wire with a mass of 0.100 kg that is fixed at both ends and has a tension of 21.0 N.
To find the linear mass density (µ) of the wire, we can use the following formula:
µ = mass/length
Using the given values, we can calculate µ as follows:
µ = 0.100 kg / 1.90 m = 0.05263 kg/m
Now that we have the linear mass density, we can find the fundamental frequency (f) using the formula:
f = (1 / 2L) × √(T / µ)
Where:
f = fundamental frequency
L = length of the wire
T = tension
µ = linear mass density
Substituting the values we found earlier, we get:
f = (1 / 2 × 1.90 m) × √(21.0 N / 0.05263 kg/m)
f ≈ 0.263 × √(399.2) ≈ 5.24 Hz
So, the fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and a tension of 21.0 N is approximately
5.24 Hz.
Learn more about frequency here:-
https://brainly.com/question/5102661
#SPJ11
One form of energy that exists in every system but is difficult to quantify is heat. Think about how we formulated our spring resonance model. Did we account for the heat energy in the medium? why do we need to?.
No, our spring resonance model did not account for the heat energy in the medium. Heat energy is generated due to the friction between the spring and the medium during the oscillation of the spring.
This energy is dissipated into the medium in the form of thermal energy, causing the amplitude of the oscillation to decrease over time.
In order to develop an accurate and complete model of the spring resonance, we need to account for the heat energy generated during the oscillation.
This is important because the amount of heat generated depends on the mechanical properties of the medium and the frequency and amplitude of the oscillation, and can have a significant impact on the behavior of the system.
By accounting for heat energy, we can better understand the dynamics of the system and predict how it will behave over time.
This can be particularly important in practical applications, such as in engineering and design, where we need to know how a system will perform under different conditions and over long periods of time.
To know more about thermal energy refer here
brainly.com/question/30859008#
#SPJ11
A tank for storing liquid has a base of area 1. 5msquare what is the pressure on the base of the tank when it contain oil weighing 6000N
The pressure on the base of the tank is: 4000 Pa when it contains oil weighing 6000 N with a base area of 1.5 m².
Pressure is defined as force per unit area. In this case, the force acting on the base of the tank is the weight of the oil, which is given as 6000 N. The area of the base is 1.5 m². Using the formula for pressure, we can calculate the pressure as:
Pressure = Force / Area
Substituting the given values, we get:
Pressure = 6000 N / 1.5 m² = 4000 Pa
Therefore, the pressure on the base of the tank when it contains oil weighing 6000 N with a base area of 1.5 m² is 4000 Pa.
To know more about pressure, refer here:
https://brainly.com/question/31608709#
#SPJ11
A 16-bit periodic count-down timer uses a clock source of 2khz and clock divider of 2, choose proper options for
how much is the frequency of the clock that feeds the counter inside this timer? [ select ] ["1 khz", "1 ms", "2 khz", "0.5 ms"]
what is the largest load value for this timer? [ select ] ["2^16 - 1", "2^16", "2^16 + 1"]
based on the answer to part 2, approximately, how long is the longest period for this periodic timer? [ select ] ["65.536 s", "0.5 ms", "1 ms", "(2^16) s"]
assume the load value is set at 999 and no rollover has happened between events, e1 and e2. if the counter reading (the value inside the counter) for the two events, c1 and c2, are 550 and 200, how long has elapsed between the two events? [ select ] ["350 ms", "350 sys clock cycles"]
assume the load value is 9999. once an event, e1, happens, the light should turn on and stay on for 3 seconds. if the counter value when e1 happens is 2000 and we immediately turn on the light, what should be the counter value when we have to turn off the light (after 3 seconds)?
The frequency of the clock that feeds the counter inside this timer is calculated as 1 kHz.
The frequency of clock that feeds the counter inside this time
[tex]f_{t}[/tex] = clock source frequency / 2
= fs / 2
= 2/ 2 = 1 kHz
Time period = 1 / f
= 1 / 1 h = 1 ms
for each count time gap = 1 ms
part 2 :
Because the counter has 16 bits, its counting range is from 0 to (2ⁿ - 1) for up counting
(2ⁿ - 1) to 0 for down counting
for 16 bit for down counting = (2 ¹⁶ - 1) to 0
The larger load value to start down counting = 2¹⁶ - 1
Part 3:
The longest period for 16 bit periodic counter = total count × time base
= 2¹⁶ × 1 ms
= 65, 536 × 1 ms = 65. 5365
Part 4 :
load value is 999
count value C₁ = 550 for event 1
count value C₂ = 200 for event 2
time elapsed = (C₁ - C₂ )× time base
= ( 550 - 200) × 1 ms
= 350 ms
Part 5:
Assume load is 9999 for each cycle that the timer is loaded with before beginning the countdown, which began at = 2000 C
time elapsed = 3 s
total counts required = time elapsed / time base
= 3 s / 1 ms = 3000
However, when the timer reaches zero, it becomes a down count timer and initiates the cycle with a load value of 9999.
Before restart it completes - 2001 including 0
after restart it requires - 999
current value = 9999 - 999
= 9000
Learn more about frequency of clock;
brainly.com/question/8895503
#SPJ4
NEED HELP FAST!!!! Please answer both questions
Answer:
1. 0.102 mol/kg.
2. 0.444 mol/kg.
Explanation:
Work on 1.To calculate molality, we need to know the moles of solute (NaCl) and the mass of the solvent (water) in kilograms. First, we need to convert the mass of NaCl to moles by dividing by its molar mass. Then we convert the mass of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent.
Work on 2.
First, we need to convert the mass of glucose to moles by dividing by its molar mass. Then we convert the volume of water to kilograms. Molality (m) is equal to moles of solute divided by kilograms of solvent. Finally, we need to round the answer to three significant figures.
how friction oppse motion
Answer:
setting a stationary body in motion.
Explanation:
like a stationary car will start moving when driving force is applied
if an object is speeding up, which of the following is true?multiple choice question.distance and speed are inversely proportional.the signs of the velocity and acceleration are the same.the magnitude of velocity and acceleration are always zero.the signs of the velocity and acceleration are different.
If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.
This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.
Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.
To know more about the Acceleration, here
https://brainly.com/question/30499732
#SPJ4
Blue jeans (blank) blue light, so that we see them as the color blue.
Answer:
Blue Jeans (are) blue light,
so that we see them as the color
Find the direction and magnitude of :
1. The vector sum A + B [10. 22m, 145. 16°]
2. The vector A - B, [49. 56m, 157°] and
3. The vector difference B - A. [49. 56m, 337].
The direction and magnitude of the three given vectors are:
1. A + B: magnitude = 26.07m, direction = -49.62°
2. A - B: magnitude = 49.56m, direction = 12.84°
3. B - A: magnitude = 49.56m, direction = 191.16°.
To find the direction and magnitude of the given vectors, we can use the trigonometric functions of sine, cosine, and tangent.
1. The vector sum A + B [10.22m, 145.16°]:
To find the magnitude, we use the formula: |A + B| = √(A^2 + B^2 + 2ABcosθ). Plugging in the values, we get |A + B| = √(10.22^2 + 22^2 + 2(10.22)(22)cos(145.16°)) = 26.07m. To find the direction, we use the formula: tanθ = (Bsinθ + Asin(180°-θ))/(Bcosθ + Acos(180°-θ)). Plugging in the values, we get tanθ = (-22sin(145.16°) + 10.22sin(34.84°))/(-22cos(145.16°) - 10.22cos(34.84°)) = -1.23. Therefore, the direction is θ = -49.62° (measured counterclockwise from the positive x-axis).
2. The vector A - B, [49.56m, 157°]:
To find the magnitude, we simply take the absolute value of A - B, which is 49.56m. To find the direction, we can subtract the angle of B from the angle of A, which gives us 12.84° (measured counterclockwise from the positive x-axis).
3. The vector difference B - A, [49.56m, 337°]:
To find the magnitude, we simply take the absolute value of B - A, which is also 49.56m. To find the direction, we can subtract the angle of A from the angle of B, which gives us 191.16° (measured counterclockwise from the positive x-axis).
For more about direction and magnitude:
https://brainly.com/question/3411372
#SPJ11
Describe how a reservoir functions like a battery. In your description, write how energy is stored, how energy is charged, and how energy is released.
A reservoir functions like a battery by storing potential energy and releasing it when needed.
What is a reservoir?A reservoir can function like a battery by storing and releasing energy. In a hydroelectric reservoir, potential energy is stored by collecting water in a high altitude area, which can then be released to generate electricity.
Similar to a battery, the energy stored in a reservoir can be charged and discharged as needed.
The charging process occurs when water is pumped uphill using electricity generated by other sources, and the discharge process occurs when the stored water is released to generate electricity during times of high demand.
Learn more about reservoir here: https://brainly.com/question/30544847
#SPJ1
Day 58
1. Developing decision-making skills is a vital aspect that occurs during which stage of adolescent development?
social development
physical development
emotional development
intellectual development
4
Answer:
Developing decision-making skills is a vital aspect that occurs during the stage of intellectual development in adolescent development.
Explanation:
During adolescence, individuals undergo significant changes in their cognitive abilities, including an increase in abstract thinking, reasoning, and problem-solving skills. These changes allow adolescents to start thinking critically and independently, weigh options, and make more informed decisions about their lives.
As adolescents develop their intellectual abilities, they also gain more control over their lives and begin to make decisions about their education, career paths, relationships, and other important aspects of their lives. This is a critical time for developing decision-making skills, as the decisions made during adolescence can have significant and long-lasting effects on individuals' lives.
While other aspects of adolescent development, such as social, emotional, and physical development, are also important, intellectual development plays a crucial role in helping adolescents navigate the complex and challenging decisions they face as they transition to adulthood.
If three crests pass Pin in one second, the wavelength is?
The wavelength of the wave as we have it is 3m
What is the wavelength of a wave?A wave's wavelength is the separation between two successive locations on the wave that are in phase, or at the same stage of their cycle. In other terms, it is the separation between two wave crests or troughs.
We know that the wavelength = Number of crests = 3m
Wave speed = 3 m/s
We would then have that;
v = λf
v = wave speed
f = frequency
λ = wavelength
Thus since there are three crests then the wavelength must be 3m
Learn more about wavelength:https://brainly.com/question/31143857
#SPJ1
physicist s. a. goudsmit devised a method for measuring accurately the masses of heavy ions by timing their periods of revolution in a known magnetic field. a singly charged ion makes 6.00 rev in a 40.0 mt in 1.32 ms. calculate its mass, in atomic mass units.
A singly charged ion makes 6.00 rev in a 40.0 mt in 1.32 ms. The atomic mass of the singly charged ion is 24.3 atomic mass units
Physicist S.A. Goudsmit devised a method for accurately measuring the masses of heavy ions by timing their periods of revolution in a known magnetic field. This method is known as the magnetic moment method. It involves the use of a magnetic field to deflect the ion in a circular path, and measuring the time it takes for the ion to complete a full revolution. The mass of the ion can then be calculated from its charge, the magnetic field strength, and the time taken for one revolution.
In this case, we are given that a singly charged ion makes 6.00 revolutions in a magnetic field of 40.0 millitesla in 1.32 milliseconds. To calculate its mass in atomic mass units (amu), we can use the formula:
mass = (charge x magnetic field x period) / (2 x pi)
where charge is the charge of the ion (in Coulombs), magnetic field is the strength of the magnetic field (in Tesla), period is the time taken for one revolution (in seconds), and pi is the mathematical constant pi.
Since the ion is singly charged, its charge is 1.6 x 10^-19 C. Converting the magnetic field from millitesla to Tesla, we get 0.04 T. Converting the period from milliseconds to seconds, we get 0.00132 s. Plugging in these values, we get:
mass = (1.6 x 10^-19 C x 0.04 T x 0.00132 s) / (2 x pi) = 4.04 x 10^-26 kg
To convert this mass to atomic mass units, we divide by the mass of one atomic mass unit (1.66 x 10^-27 kg/amu):
mass in amu = (4.04 x 10^-26 kg) / (1.66 x 10^-27 kg/amu) = 24.3 amu
To learn more about : mass
https://brainly.com/question/86444
#SPJ11
At the gym, a man pulls a bar on a machine that works the muscles of the upper back. It takes him 0. 5 seconds to raise 30
kilograms of weights a vertical distance of 0. 5 meters.
Which of these exerts the same power output? (Estimate g as 10 m/s2. )
A) lifting 25 kilograms a distance of 2. 4 meters in 2. 0 seconds
B) lifting 45 kilograms a distance of 2. 4 meters in 3. 0 seconds
C) leg pressing 45 kilograms a distance of 0. 5 meters in 0. 5 seconds.
D) bench pressing 30 ligrograms a distance of 0. 5 meter in 1. 5 seconds.
Pleaseeeeeee help me
The power output of the man pulling the bar can be calculated as follows:
Power = Work / Time
The work done by the man is equal to the force he exerts multiplied by the distance he moves the weights:
Work = Force x Distance
The force he exerts is equal to the weight of the weights he is lifting:
Force = Weight x g
where g is the acceleration due to gravity, which is approximately 10 m/s^2.
Plugging in the given values, we get:
Force = 30 kg x 10 m/s^2 = 300 N
Work = Force x Distance = 300 N x 0.5 m = 150 J
Power = Work / Time = 150 J / 0.5 s = 300 W
Now we can check which of the other options exerts the same power output:
Option A:
Force = 25 kg x 10 m/s^2 = 250 N
Work = Force x Distance = 250 N x 2.4 m = 600 J
Power = Work / Time = 600 J / 2.0 s = 300 W
Option B:
Force = 45 kg x 10 m/s^2 = 450 N
Work = Force x Distance = 450 N x 2.4 m = 1080 J
Power = Work / Time = 1080 J / 3.0 s = 360 W
Option C:
Force = 45 kg x 10 m/s^2 = 450 N
Work = Force x Distance = 450 N x 0.5 m = 225 J
Power = Work / Time = 225 J / 0.5 s = 450 W
Option D:
Force = 30 kg x 10 m/s^2 = 300 N
Work = Force x Distance = 300 N x 0.5 m = 150 J
Power = Work / Time = 150 J / 1.5 s = 100 W
Therefore, options A and B exert the same power output as the man pulling the bar, while options C and D do not.
45 N
15 N
Net Force:
Is it balanced or unbalanced?
net force: 60( not sure)
I would say it's unbalanced because these forces are not of the same magnitude.
How old was isaac newton when in 1666 he formulated the theory of universal gravity?
Isaac Newton was born on January 4, 1643, in England. He was 23 years old when he formulated the theory of universal gravity in 1666.
This was during a period when he was isolating himself to avoid the bubonic plague outbreak that was ravaging England at that time.
While in isolation, Newton engaged in extensive scientific research and discovered the laws of motion, optics, and gravity.
His theory of universal gravitation proposed that every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
This theory revolutionized the field of physics and remains a fundamental concept in modern science.
To know more about bubonic plague, refer here:
https://brainly.com/question/23399204#
#SPJ11
Particles q1, q2, and q3 are in a straight line. Particles q1 = -5. 00 x 10^-6 C, q2 = +2. 50 x 10^-6 C
The net force acting on q₂ when Particle is positioned between q₁ and q₃ is 0.486N.
Inversely proportional to the square of the distance between charges and proportionate to the product of their magnitudes is the electrostatic force of attraction or repulsion.
Force on q₂ due to q₁
F₁₂ = kq₁q₂ / r₁₂²
Putting the values provided , may get
F₁₂ = 9 x 10⁹ x 5 x 10⁻⁶ x 2.5 x 10⁻⁶ / (0.5)²
F₁₂ = 0.414 N
Force on q₂ due to q₃ placed at distance 0.25m
F₂₃ =kq₂q₃ / r₂₃²
Substitute the values, can get
F₂₃ = 9 x 10⁹ x 2.5 x 10⁻⁶ x 2.5 x 10⁻⁶ / (0.25)²
F₂₃ = 0.9N
The net force can be calculated as
F =F₂₃ -F₁₂
F =0.9 - 0.414 = 0.486 N
Therefore, the net force of q₂ is 0.486 N.
The complete question is,
Particles q1, q2, and q3 are in a straight line. Particles q1 = -5.00 x 10^-6 C, q2 = +2.50 x 10^-6 C, and q3 = -2.50 x 10^-6 C. Particles q1 and q2 are separated by 0.500 m. Particles q2 and q3 are separated by 0.250 m. What is the net force on q2?
To know more about Particle
https://brainly.com/question/23267775
#SPJ4
Josh pushes a table with a force of 80. N at an angle of 30°
to the table. If he pushes the table 5 meters, how much
work has he done? Joules
Josh pushes a table with a force of 80. N at an angle of 30° to the table. If he pushes the table 5 meters then Josh has done 346.41 Joules of work on the table.
To calculate the work done by Josh on the table, we can use the formula:
[tex]W = F \times d \times cos(\theta)[/tex]
where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.
Substituting the given values, we get:
[tex]W = 80 N \times 5 m \times cos(30^{\circ})[/tex]
W = 346.41 J
Therefore, Josh has done 346.41 Joules of work on the table. To understand the concept of work, it is important to note that work is done when a force is applied to an object and it causes it to move.
In this case, Josh applies a force of 80 N at an angle of 30° to the table, causing it to move 5 meters. The work done is calculated by multiplying the force, distance, and cosine of the angle between them.
In summary, to calculate the work done by Josh on the table, we use the formula [tex]W = F \times d \times cos(\theta)[/tex] , where W is the work done, F is the force applied, d is the distance moved, and theta is the angle between the force and the direction of motion.
By substituting the given values, we find that Josh has done 346.41 Joules of work on the table.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
The speakers in a sports stadium are
89. 5 m from a fan's seat. How much
time does it take sound to travel from
the speakers to the fan's seat?
Speed of sound = 343 m/s
(Unit = s)
This is also one I am confused on
The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula
Time = distance / speed
Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.
In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).
Plugging in these values into the formula, we get
Time = 89.5 m / 343 m/s
Time = 0.261 seconds
Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
To know more about time here
https://brainly.com/question/22594054
#SPJ4
If the magnitude of the drift velocity of free electrons in a copper wire is 8. 32 10-4 m/s, what is the electric field in the conductor
The electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m. The drift velocity of free electrons in a copper wire is given as 8.32 x [tex]10^{-4}[/tex] m/s.
The electric field in a conductor is directly proportional to the drift velocity. The relationship between drift velocity and electric field is given by:
vd = (eEτ)/(m)
where,
vd = drift velocity of electrons
e = charge of an electron
E = electric field
τ = relaxation time of electrons
m = mass of an electron
Assuming the values of e, m, and τ for copper, we can solve for the electric field:
E = (vd x m)/(eτ)
E = (8.32 x [tex]10^{-4}[/tex] m/s x 9.11 x [tex]10^{-31}[/tex] kg)/(1.6 x [tex]10^{-19}[/tex] C x 2.3 x [tex]10^{-14}[/tex] s)
E ≈ 7.63 x [tex]10^{-5}[/tex] V/m
Therefore, the electric field in the copper wire is approximately 7.63 x [tex]10^{-5}[/tex] V/m.
To know more about drift velocity, refer here:
https://brainly.com/question/31580648#
#SPJ11
A mechanical system is used to pull a tarp over a grass tennis
court. On a clear, sunny day, the efficiency of the system is
55%. After a rainstorm, the efficiency is measured to be 65%.
Explain why there is a difference in the efficiencies.
The difference in efficiencies of the mechanical system can be attributed to several factors such as increase in frictional force between the tarp and the system, an increase in tarp weight owing to water absorption, and an overall increase in resistance on the grass court due to wetness.
Firstly, the frictional force between the tarp and the mechanical system may have increased due to water on the tarp, leading to a decrease in efficiency.
Secondly, the weight of the tarp may have increased due to water absorption, leading to a greater load on the mechanical system, which in turn reduces efficiency.
Thirdly, the presence of water on the grass court may have increased the overall resistance to the movement of the tarp, leading to a decrease in efficiency.
These factors combined may explain the observed difference in efficiencies between the clear, sunny day and after a rainstorm.
For more such questions on mechanical system, click on:
https://brainly.com/question/13189455
#SPJ11
the earth travels around the sun in an almost circular orbit at an almost constant speed of 107,300 km/h (or 67,062 mi/h)! which statement(s) are true about the earth's motion about the sun?multiple select question.the earth is going too fast to accelerate any more.the earth is not accelerating since we earthlings do not feel the acceleration.the earth is not accelerating since its speed is constant.the earth has a velocity that is always changing.the earth cannot accelerate since it is in space.the earth is accelerating since the direction of its velocity is changing.
The statement that the earth is accelerating since the direction of its velocity is changing is true, as changes in direction are also changes in velocity, which constitutes acceleration
The statement that the earth is going too fast to accelerate any more is false. This is because acceleration is a change in velocity, which can occur even if the speed is constant.
The statement that the earth is not accelerating since we earthlings do not feel the acceleration is also false, as acceleration is a physical property of an object's motion, independent of perception.
The statement that the earth is not accelerating since its speed is constant is true, as acceleration is defined as a change in velocity, which includes changes in speed or direction.
The statement that the earth has a velocity that is always changing is also true, as its motion around the sun is not perfectly circular and is affected by other celestial bodies.
The statement that the earth cannot accelerate since it is in space is false, as acceleration is a property of motion regardless of the medium in which it occurs.
To lean more about : velocity
https://brainly.com/question/80295
#SPJ11
Which choice best explains the definition of a variable?
1. A variable is one way that scientists collect and record data in a scientific investigation.
2. A variable is something that can change and may affect the outcome in a scientific investigation.
3. A variable is a type of testable question that scientists ask when beginning a scientific investigation.
4. A variable is an educated guess that scientists make before conducting a scientific investigation
The best choice that explains the definition of a variable is, a variable is something that can change and may affect the outcome in a scientific investigation. Option 2 is correct.
In scientific investigations, a variable is a factor or condition that can be changed or varied, and may have an effect on the outcome of the investigation. Variables are often classified into independent, dependent, and controlled variables. The independent variable is the factor that is intentionally changed by the researcher to observe its effect on the dependent variable, which is the factor that is being measured or observed.
While the other choices are related to scientific investigations, they do not accurately define what a variable is. A variable is a factor or condition that can change and potentially affect the outcome of an experiment or scientific investigation. Option 2 is correct.
To know more about variables, here
brainly.com/question/17344045
#SPJ4