this exercise uses the radioactive decay model. after 3 days a sample of radon-222 has decayed to 58% of its original amount. (a) what is the half-life of radon-222? (round your answer to two decimal places.) 2 incorrect: your answer is incorrect. seenkey 3.82 days (b) how long will it take the sample to decay to 20% of its original amount? (round your answer to two decimal places.)

Answers

Answer 1

a. The half-life of radon-222 is 3.82 days. b. It will take approximately 11.46 days for the sample to decay to 20% of its original amount.

(a) To find the half-life of radon-222, we can use the formula:

[tex]N = N0 * (1/2)^{(t/T)}[/tex]

where:

[tex]N = amount\ remaining\ after\ time\ t\\N0 = initial\ amount\\T = half\ -life[/tex]

We know that after 3 days, the amount remaining is 58% of the original amount, so N/N0 = 0.58 and t = 3 days. Substituting these values:

[tex]0.58 = (1/2)^(3/T)[/tex]

Taking the natural logarithm of both sides:

[tex]ln(0.58) = ln(1/2)^{(3/T)} \\ln(0.58) = -(3/T) * ln(2)\\T = -(3/ln(2)) * ln(0.58)\\T = 3.82 days[/tex]

(b) To find how long it will take the sample to decay to 20% of its original amount: [tex]N = N0 * (1/2)^{(t/T)}[/tex]

We want to find the time t for which N/N0 = 0.20. Substituting this value and T = 3.82 days into the formula gives:

[tex]0.20 = (1/2)^{(t/3.82)}[/tex]

Taking the natural logarithm of both sides:

[tex]ln(0.20) = (t/3.82) * ln(1/2) \\t = -(3.82/ln(1/2)) * ln(0.20)[/tex]

[tex]t = 11.46 days[/tex]

To know more about logarithm, here

brainly.com/question/30085872

#SPJ4


Related Questions

In order to produce 972 kJ of heat, how many grams of H2 must react?


2 H2 (g) + O2 (g) → 2 H20 (g) + 243 kJ

Answers

16.128 grams of hydrogen gas would need to react in order to produce 972 kJ of heat energy.

So, first, we can calculate the amount of heat energy released per mole of [tex]H_2[/tex] reacted:

243 kJ of heat / 2 moles of [tex]H_2[/tex] = 121.5 kJ/mol of [tex]H_2[/tex]

We can use the following equation to calculate the amount of hydrogen gas required:

Amount of [tex]H_2[/tex]  = Energy released / Heat of reaction per mole of [tex]H_2[/tex]

Amount of [tex]H_2[/tex] = 972 kJ / 121.5 kJ/mol = 8 moles of [tex]H_2[/tex]

Finally, we can calculate the mass of [tex]H_2[/tex] required using its molar mass:

Mass of [tex]H_2[/tex] = Number of moles of[tex]H_2[/tex]x Molar mass of [tex]H_2[/tex]

Mass of [tex]H_2[/tex] = 8 moles x 2.016 g/mol = 16.128 g of [tex]H_2[/tex]

To know more about hydrogen gas, here

brainly.com/question/29802537

#SPJ4

What is the most crucial step during the preparation of the grignard reagent?

Answers

The most crucial step during the preparation of the Grignard reagent is ensuring that all the equipment and reactants are absolutely dry.

To ensure that the equipment and reactants are dry, the equipment must be thoroughly cleaned and dried before use, and the reactants should be purified and dried before being introduced into the reaction vessel. The solvent, typically diethyl ether, should also be dried using a drying agent such as anhydrous magnesium sulfate.

The reaction should be carried out under an inert atmosphere, such as nitrogen or argon, to prevent the formation of unwanted byproducts. By taking these precautions, the formation of the Grignard reagent can be optimized, leading to a higher yield and better quality product.

To learn more about reagent follow the link:

https://brainly.com/question/30144052

#SPJ4

Compute the mass of KI needed to prepare 500 mL of a 0. 750 M solution

Answers

The mass of KI needed to prepare 500 mL of a 0. 750 M solution is 62.25 grams

To compute the mass of KI needed to prepare 500 mL of a 0.750 M solution, use the formula:

Molarity (M) = moles of solute / volume of solution in liters

First, convert the volume to liters: 500 mL = 0.5 L

Next, rearrange the formula to find the moles of solute:

moles of solute = Molarity × volume of solution in liters
moles of KI = 0.750 M × 0.5 L
moles of KI = 0.375 moles

Now, find the molar mass of KI (Potassium Iodide):
K (Potassium) = 39.10 g/mol
I (Iodine) = 126.90 g/mol
Molar mass of KI = 39.10 g/mol + 126.90 g/mol = 166.00 g/mol

Finally, calculate the mass of KI needed:

mass of KI = moles of KI × molar mass of KI
mass of KI = 0.375 moles × 166.00 g/mol
mass of KI = 62.25 g

Therefore, you will need 62.25 grams of KI to prepare 500 mL of a 0.750 M solution.

Know more about Molarity here:

https://brainly.com/question/8732513

#SPJ11

How do you solve this question?

Answers

Answer:

This is thermodynamics.

Using simple thermodynamics operation equation

1. -

Averigua la molaridad de una disolución que contiene 58,8 gramos de yoduro de calcio (CaI2) , por litro

Answers

The molarity of the solution comes out to be 0.200 M, which is calculated in the below section.

The number of moles of calcium iodide can be calculated as follows-

n = m / M ......(1)

Molar mass (M) of Calcium iodide = 293.887 g/mol

Mass (m) = 58.8 grams

Substitute the known values in equation (1) as follows-

n = 58.8 grams / 293.887 g/mol

   = 0.200 moles

Now, the molarity can be calculated using the below formula-

Molarity = no. of moles / Volume

              = 0.200 moles / 1 L

               = 0.200 M

To learn more about molarity check the link below-

https://brainly.com/question/30404105

#SPJ4

Complete question-

Find the molarity of a solution that contains 58.8 grams of calcium iodide (CaI2), per liter.

Which molecule has the shortest carbon-oxygen bond length?

A. CH3COOH
B. CH3CH2OH
C. CO₂
D. CO

Answers

i think it would be D. CO
CO has the shortest C-O bond length

Determine the final pressure of a sample of a gas measured initially at 1. 00 atm and 25ºC if it is heated to 50ºC

Answers

The final pressure of the gas sample is 1.09 atm when heated to 50ºC.

The final pressure of a gas sample initially at 1.00 atm and 25ºC when heated to 50ºC can be calculated using the ideal gas law:

P₁ × V₁ ÷ T₁ = P₂ × V₂ ÷ T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature of the gas, respectively, and P₂, V₂, and T₂ are the final pressure, volume, and temperature of the gas, respectively.

Assuming that the volume of the gas remains constant, V₁ = V₂, and rearranging the ideal gas law, we get:

P₂ = P₁ (T₂ ÷ T₁)

Substituting the values, we get:

P₂ = (1.00 atm) × (323 K) ÷ (298 K) = 1.09 atm

To learn more about pressure follow the link:

brainly.com/question/23710615

#SPJ4

Determine the quantity of heat


required to heat 352 g of water


from 20. 0°C to 93. 7°C in an


electric kettle.

Answers

Approximately 108,066 J of heat is required to heat 352 g of water from 20.0°C to 93.7°C in an electric kettle.

To determine the quantity of heat required to heat 352 g of water from 20.0°C to 93.7°C, we need to use the specific heat capacity of water and the equation:

q = m × c × ΔT

ΔT = change in temperature (in °C)

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 93.7°C - 20.0°C

ΔT = 73.7°C

Substituting the given values into the equation, we get:

q = 352 g × 4.184 J/g·°C × 73.7°C

q = 108,066.496 J

q ≈ 108,066 J (rounded to three significant figures)

To know more about initial temperature, here

brainly.com/question/31702242

#SPJ4

What is the energy of a photon that emits a light of frequency 6. 42 x 1014 Hz?
A. 3. 10 x 10-19 J
B. 4. 25 x 10-19 J
C. 9. 69 x 10-19 J
D. 4. 67 x 10-19 J​

Answers

The energy of a photon that emits a light of frequency 6. 42 x 1014 Hz is 4.25 x 10^-19 J.

The energy of a photon can be calculated using the equation:

E=hf,

where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), and f is the frequency of the light emitted by the photon.

Plugging in the given frequency of 6.42 x 10^14 Hz into the equation, we get

E=(6.626 x 10^-34 J.s)(6.42 x 10^14 Hz) = 4.25 x 10^-19 J.

Therefore, the correct answer is B i.e, 4.25 x 10^-19 J.

It should be emphasized that a photon's energy is directly linked to its frequency and inversely related to its wavelength. Therefore, light with higher frequency, such as blue light, contains more energy than light with lower frequency, such as red light.

Know more about Energy here:

https://brainly.com/question/1932868

#SPJ11

a solution of the weak acid ha ha is prepared by dissolving 2.70 g 2.70 g of ha ha in 100.0 ml 100.0 ml water. the solution is titrated, and the equivalence point is reached after 32.1 ml 32.1 ml of 0.500 m naoh 0.500 m naoh is dispensed. calculate the molar mass of ha.

Answers

The molar mass of HA is approximately 168.48 g/mol.

To calculate the molar mass of HA, we need to use the balanced chemical equation for the reaction between HA and NaOH:

[tex]HA + NaOH[/tex] → [tex]NaA + H2O[/tex]

From the equation, we can see that 1 mole of HA reacts with 1 mole of NaOH to produce 1 mole of NaA. At the equivalence point of the titration,

[tex]moles of NaOH = (0.500 mol/L) * (0.0321 L) = 0.01605 mol[/tex]

Since the initial solution was prepared by dissolving 2.70 g of HA in 100.0 ml of water, we can calculate the initial concentration of HA in units of moles per liter:

[tex]moles\ of HA = (2.70 g / molar\ mass\ of HA) = (0.0270 kg / molar\ mass\ of HA)[/tex]

[tex]initial\ concentration\ of\ HA = moles\ of\ HA / (0.100 L) = moles\ of\ HA / 1000 mL[/tex]

Setting the moles of NaOH equal to the moles of HA, we can solve for the molar mass of HA:

moles of NaOH = moles of HA

[tex]0.01605\ mol = (0.0270 kg / molar\ mass\ of HA) / 0.100 L[/tex]

[tex]molar\ mass\ of\ HA = (0.0270 kg / 0.01605 mol) / 0.100 L = 168.48 g/mol[/tex]

To know more about molar mass, here

brainly.com/question/22997914

#SPJ4

Find the number of grams of zinc (Zn) metal that will completely react with 730


grams of hydrochloric acid (HCl) to produce zinc chloride (ZnCl2) and hydrogen gas


(H2).



Write the balanced chemical equation.


Use coefficients from balanced equation to determine mole ratio

Answers

654 grams of Zn metal will completely react with 730 grams of HCl


The balanced chemical equation for this reaction is:
Zn + 2HCl → ZnCl2 + H2

From the equation, we can see that for every 1 mole of Zn, 2 moles of HCl are required for a complete reaction. This means the mole ratio of Zn to HCl is 1:2.

To determine the number of moles of HCl used, we need to convert the given mass of HCl to moles. The molar mass of HCl is 36.5 g/mol, so:

730 g HCl x (1 mol HCl/36.5 g HCl) = 20 moles HCl

Using the mole ratio from the balanced equation, we can determine the number of moles of Zn required:

20 moles HCl x (1 mol Zn/2 mol HCl) = 10 moles Zn

Finally, we can convert the number of moles of Zn to grams using its molar mass of 65.4 g/mol:

10 moles Zn x (65.4 g Zn/mol) = 654 grams of Zn

Therefore, 654 grams of Zn metal will completely react with 730 grams of HCl to produce ZnCl2 and H2.

To know more about Balanced Equation:

https://brainly.com/question/11904811

#SPJ11

A balloon has a volume of 3. 7 Lat a pressure of 1. 1 atm and a temperature of 30 °C. If


the balloon is submerged in water to a depth where the pressure is 4. 7 atm and the


temperature is 15 °C, what will its volume be in L?

Answers

When the balloon is submerged in water at a depth where the pressure is 4.7 atm and the temperature is 15 °C, its volume will be approximately 0.995 L.

From the ideal gas equation, we can use the combined gas law formula, which is:

(P1 × V1) / T1 = (P2 × V2) / T2

Here, P1 = 1.1 atm (initial pressure), V1 = 3.7 L (initial volume), T1 = 30 °C (initial temperature), P2 = 4.7 atm (final pressure), and T2 = 15 °C (final temperature). We need to find V2 (final volume).

First, convert the temperatures to Kelvin by adding 273.15:

T1 = 30 + 273.15 = 303.15 K

T2 = 15 + 273.15 = 288.15 K

Now, plug in the values into the combined gas law formula and solve for V2:

        (P1 × V1) / T1 = (P2 × V2) / T2

(1.1 × 3.7) / 303.15 = (4.7 × V2) / 288.15

    (4.07) / 303.15 = (4.7 × V2) / 288.15

Now, solve for V2:

V2 = (4.07 × 288.15) / (303.15 × 4.7)

V2 ≈ 0.995 L

To know more about the ideal gas equation, click below.

https://brainly.com/question/20897725

#SPJ11

what is the major difference between the ice that Dr. Stewart is climbing and the ice that is close by?
Please help due today and if I don't pass, I don't graduate.

Answers

One potential difference between ice that Dr. Stewart is climbing and "normal" water ice could be the location or conditions in which it formed.

How to explain the difference

For example, glacier ice, which forms over many years from compacted snow, can have different properties than the ice that forms on a frozen lake or river. Similarly, ice formed in a cold laboratory setting might have different properties than ice formed under natural conditions.

Other factors that could impact the characteristics of ice include the presence of air bubbles, cracks or fissures, and the size and shape of ice crystals. Ice that has been subjected to pressure or other stresses can also exhibit unique features such as layers or bands.

Learn more about ice on

https://brainly.com/question/30192582

#SPJ1

What will phospholipids form when placed in water?
a sphere-shaped single layer
a sphere-shaped double layer
a sheet-shaped double layer
a sheet-shaped single layer​

Answers

Phospholipids will form a sheet-shaped double layer when placed in water. The correct answer is option c.

This is known as a phospholipid bilayer, which is a fundamental component of cell membranes.

The hydrophilic (water-loving) phosphate heads of the phospholipids face outwards and interact with the water molecules, while the hydrophobic (water-fearing) fatty acid tails face inwards and interact with each other.

The phospholipid bilayer provides a selectively permeable barrier that allows certain substances to pass through the membrane while preventing others from doing so.

Additionally, the fluidity of the phospholipid bilayer can be regulated by various factors, such as temperature and the presence of cholesterol, allowing for optimal membrane function in different cellular environments.

The correct answer is option c.

To know more about Phospholipids refer to-

https://brainly.com/question/14949280

#SPJ11

Complete Question

What will phospholipids form when placed in water?

a. a sphere-shaped single layer

b. a sphere-shaped double layer

c. a sheet-shaped double layer

d. a sheet-shaped single laye

Determine the amount of heat required to convert 46. 0 g of ethanol at 25°c to the vapor phase at 78°c. Based on the melting and boiling points, ethanol is a liquid at 25°c. Consider the heating curve when organizing your thoughts and answering the question. Use the information about ethanol ch3ch2oh given in the table below.

Answers

The amount of heat required to convert 46.0 g of ethanol at 25° C to vapor phase is ≅ 44.2 KJ total heat .

Using the mass , evaluating the moles of ethanol :

                              46.0 g × [tex]\frac{1 Mol}{46.07 g}[/tex] = 0.998 mol

                                        ≅ 1.0 mol

The heat required to convert 46.0 g ethanol from 25° C at 78° C is evaluated :

                                     q₁ = m[tex]C_{liquid }[/tex]ΔT

                                   = 46.0 g × [tex]\frac{2.3 J}{g. K}[/tex] × 78° C - 25°C

                                 =     5607.47J × 1 KJ /1000 J

                                           = 5.607 KJ

So, the heat required in conversion of 1.0 mol of ethanol at 78 ° C  to 1.0 mol ethanol vapour is expressed as :

                           q₂ = moles × Δ[tex]H_{vap}[/tex]

                            = 1.0 mol × 38.56 KJ /mol

                                = 38.56 kJ/ mol

The total heat requirement conversion of 46 .0 g of ethanol at 25° C to the vapour state at 78° C :

                           Total heat = q₁ + q₂

                                         = 5.607 KJ + 38.56 KJ

                                            = 44.167 KJ

                                        ≅ 44.2 KJ

Vapour phase :

Fume alludes to a gas stage at a temperature where a similar substance can likewise exist in the fluid or strong state, beneath the basic temperature of the substance. As a result of their tendency to be volatile, liquids will enter the vapor phase when the temperature is raised sufficiently. At the specified temperature, a liquid is considered to be volatile if it exhibits a significant vapor pressure.

How does vapour phase transfer work?

Transferring a substance from a vapor to a solid by desorbing it using a desorbent or carrier gas and passing the vapor sample through a stationary phase (such as silica particles).

Incomplete question :

Determine the amount of heat required to convert 46. 0 g of ethanol at 25°c to the vapor phase at 78°c. Based on the melting and boiling points, ethanol is a liquid at 25°c. Consider the heating curve when organizing your thoughts and answering the question. Use the information about ethanol CH₃CH₂OH given in the table below.

Use the following information about ethanol CH₃CH₂OH.

Tmelt = –114°C

Tboil = 78°C

∆Hfus = 5.02 kJ/mol

∆Hvap = 38.56 kJ/mol

C solid = 0.97 J/g-K

C liquid = 2.3 J/g-K

Learn more about Vapour phase :

brainly.com/question/28303854

#SPJ4

use a sheet of paper to answer the following question. take a picture of your answers and attach to this assignment. treatment of pentanedioic (glutaric) anhydride with ammonia at elevated temperature leads to a compound of molecular formula c5h7no2. what is the structure of this product? [hint: you need to think about the reactivity not only of acid anhydrides but also of amides and carboxylic acids]

Answers

The structure of product is shown.

When pentanedioic (glutaric) anhydride reacts with ammonia at high temperature, it undergoes an amide formation reaction to produce a compound with the molecular formula C₅H₇NO₂. The amide formation reaction involves the nucleophilic attack of the ammonia molecule on one of the carbonyl carbon atoms of the anhydride, leading to the formation of an intermediate product called an amide.

This amide then undergoes further reactions to form the final product with the given molecular formula. The presence of both carboxylic acid and amide functional groups in the molecule indicates that it contains both the original anhydride and the product of its reaction with ammonia.

To know more about ammonia, here

brainly.com/question/15719562
#SPJ4

How do you calculate the concentration of obtained solution with 2 solutions having the same concentration but different volume?
^
50.0cm³ of 0.0250 mol/dm³ nitric acid was mixed with 40.0 cm³ of 0.0250 mol dm/³ sulfuric acid. ​

Answers

To calculate the concentration of the resulting solution, we need to use the principle of conservation of moles. This principle states that the number of moles of a chemical species is conserved when it is mixed with another chemical species. We can use the following formula to calculate the concentration of the resulting solution:

C1V1 + C2V2 = C3V3

where C1 and V1 are the concentration and volume of the first solution, C2 and V2 are the concentration and volume of the second solution, and C3 and V3 are the concentration and volume of the resulting solution.

In this case, we have:

C1 = 0.0250 mol/dm³ (nitric acid)
V1 = 50.0 cm³ (nitric acid)
C2 = 0.0250 mol/dm³ (sulfuric acid)
V2 = 40.0 cm³ (sulfuric acid)

We want to find C3, the concentration of the resulting solution. We can rearrange the formula to solve for C3:

C3 = (C1V1 + C2V2) / V3

where V3 is the total volume of the resulting solution, which is the sum of the volumes of the two solutions:

V3 = V1 + V2 = 50.0 cm³ + 40.0 cm³ = 90.0 cm³

Substituting the values, we get:

C3 = (0.0250 mol/dm³ x 50.0 cm³ + 0.0250 mol/dm³ x 40.0 cm³) / 90.0 cm³

C3 = 0.0250 mol/dm³

Therefore, the concentration of the resulting solution is 0.0250 mol/dm³, which is the same as the concentration of the two original solutions.

What is the freezing point of a solution of 0. 300 mol of lithium bromide in 525 mL of water?

Answers

The freezing point of the lithium bromide solution is approximately -1.06°C.

To determine the freezing point of the solution, we need to use the freezing point depression formula:

ΔTf = Kf * molality

where ΔTf is the freezing point depression, Kf is the freezing point depression constant (which depends on the solvent), and molality is the concentration of the solution in mol/kg.

First, we need to calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

The mass of 525 mL of water is:

mass = volume * density = 525 mL * 1 g/mL = 525 g

The number of moles of lithium bromide is:

moles of LiBr = 0.300 mol

Therefore, the molality of the solution is:

molality = 0.300 mol / 0.525 kg = 0.571 mol/kg

The freezing point depression constant for water is 1.86 °C/m. Therefore, the freezing point depression is:

ΔTf = 1.86 °C/m * 0.571 mol/kg = 1.06306 °C

Finally, to find the freezing point of the solution, we need to subtract the freezing point depression from the freezing point of pure water (0°C):

Freezing point = 0°C - 1.06306°C = -1.06306°C

Therefore, the freezing point of the lithium bromide solution is approximately -1.06°C.

To know more about freezing point refer to-

https://brainly.com/question/3121416

#SPJ11

What is the mass number of an oxygen isotope that has nine neutrons.

Answers

The mass number of an oxygen isotope with nine neutrons is 25.

The mass number is the sum of protons and neutrons in an atom. Oxygen has 8 protons, and with 9 neutrons, the mass number is 8 + 9 = 25.

The given statement provides information about the mass number of a specific oxygen isotope with nine neutrons. The mass number represents the total number of protons and neutrons in an atom. In the case of this oxygen isotope, it is stated that the mass number is 25.

To calculate the mass number, we need to sum the number of protons and neutrons. The statement also mentions that oxygen has 8 protons. Therefore, by adding 9 neutrons to the 8 protons, we obtain the total mass number of 25.

In summary, the statement explains that the mass number of this particular oxygen isotope, which contains nine neutrons, is determined by the sum of the 8 protons and 9 neutrons, resulting in a mass number of 25.

To learn more about neutrons, refer below:

https://brainly.com/question/28992636

#SPJ11

write the net ionic equation for the equilibrium that is established when sodium cyanide is dissolved in water. This solutions is: (acid, base, neutral)

Answers

The net ionic equation for the equilibrium that is established when sodium cyanide (NaCN) is dissolved in water is:

NaCN + H2O ⇌ CN- + Na+ + H2O

In this equation, the cyanide ion (CN-) is produced by the dissociation of NaCN in water. The sodium ion (Na+) and water (H2O) are spectator ions and do not participate in the reaction. Therefore, they are not included in the net ionic equation.

This solution is basic because the cyanide ion is a weak base and can hydrolyze water to produce hydroxide ions (OH-) according to the following reaction:

CN- + H2O ⇌ HCN + OH-

The equilibrium constant for this reaction is relatively small, but it is enough to make the solution basic.

Visit here to learn more about ionic equation brainly.com/question/29299745

#SPJ11

0. 063L solution of Ba(OH02 is neutralized by 0. 0234L of a 1. 52 M HNO3 solution. What is the concentration of the Ba(OH)2 solution

Answers

The concentration of the Ba(OH)₂ solution is 0.1 M.

To find the concentration of the Ba(OH)₂ solution, we can use the balanced equation for the neutralization reaction between Ba(OH)₂ and HNO₃:

Ba(OH)₂ + 2HNO₃ → Ba(NO₃)₂ + 2H₂O

From the equation, we can see that one mole of Ba(OH)₂ reacts with two moles of HNO₃. Therefore, the moles of HNO₃ used in the neutralization reaction can be calculated as follows:

moles of HNO₃ = 1.52 M × 0.0234 L = 0.035568 mol

Since the moles of HNO₃ is equal to the moles of Ba(OH)₂ in the reaction, we can calculate the concentration of the Ba(OH)₂ solution as follows:

concentration of Ba(OH)₂ = moles of Ba(OH)₂ / volume of Ba(OH)₂ solution

moles of Ba(OH)₂ = moles of HNO₃ / 2 = 0.035568 mol / 2 = 0.017784 mol

volume of Ba(OH)₂ solution = 0.063 L

concentration of Ba(OH)₂ = 0.017784 mol / 0.063 L ≈ 0.1 M

To know more about concentration, refer here:

https://brainly.com/question/30639206#

#SPJ11

What does the NaCl + Br₂ represent in the reaction?
NaBr + Cl₂ → NaCl + Br₂
A. Reactants
B. Products
C. Yields Br
D. States of Matter​

Answers

B. products. (NaCl is the salt formed and Br2 is given off during the reaction).

Ite
a city is considering different water purification methods for the water supply. which fact would help inform the city if cost was
a significant constraint? (1 point)
iter
reverse osmosis systems are more expensive because of the chlorine treatments
iten
olon exchange systems are more expensive because of the chlorine treatments
iten
o reverse osmosis systems are more expensive because of the use of filters that need replacement
iten
olon exchange systems are more expensive because of the use of filters that need replacement
item
iten

Answers

If cost is a significant constraint for Itea city in choosing a water purification method for their water supply, then the fact that ion exchange systems are more expensive because of the use of filters that need replacement would be important to consider.

While reverse osmosis systems are also more expensive, it is primarily due to the chlorine treatments, which may not be a significant factor for the city. Therefore, ion exchange systems may not be a cost-effective option in the long run due to the ongoing expenses of replacing filters.

This information can help inform the city's decision-making process and ensure that they choose a water purification method that meets their needs while also being financially feasible.

to know more about water purification refer here

https://brainly.com/question/29629219#

#SPJ11

Solve the following problems using the chemical formulas as a conversion factor.


1. How many grams of Lead (Pb) contain 1. 25x104 grams of PbCO3?


2. Determine the number of moles of Hydrogen (H) in 0. 0737 mol of N2H4


3. How many grams of Iron (Fe) contain 6. 45x10-3 grams of Fe3O4?


4. Determine the number of moles of Sodium (Na) in 4. 2 mol of NaClO3

Answers

There are 0.1474 moles of hydrogen atoms in 0.0737 mol of N2H4.

What is Mole?

In chemistry, a mole is a unit used to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains as many elementary entities (atoms, molecules, or other particles) as there are atoms in 12 grams of carbon-12.

To determine the mass of lead in PbCO3, we need to use the molar mass of PbCO3 and the stoichiometric relationship between Pb and PbCO3. The molar mass of PbCO3 is 267.21 g/mol, and the stoichiometric relationship between Pb and PbCO3 is 1:1.

Thus, the mass of Pb in 1.25x10^4 g of PbCO3 can be calculated as follows:

Mass of Pb = (1.25x10^4 g PbCO3) x (1 mol PbCO3/267.21 g PbCO3) x (1 mol Pb/1 mol PbCO3) x (207.2 g Pb/mol Pb)

= 1.02x10^4 g Pb

Therefore, 1.02x10^4 g of Pb is contained in 1.25x10^4 g of PbCO3.

The formula for N2H4 indicates that there are two hydrogen atoms for every molecule of N2H4. Therefore, we can calculate the number of moles of hydrogen atoms in 0.0737 mol of N2H4 as follows:

Number of moles of H atoms = (0.0737 mol N2H4) x (2 mol H atoms/1 mol N2H4)

= 0.1474 mol H

Learn more about Mole, visit;

https://brainly.com/question/15356425

#SPJ4

PLEASE HELP
Andrea plans to go fishing in the morning, so she checks the weather forecast. The forecast shows a high-pressure area forming near her fishing spot. Using the weather data below, predict the possible weather conditions for Andrea’s trip.

Time (a.m.) Temperature (°C) Pressure (mb)
7.00 14 995
8.00 14 1001
9.00 14 1113
10.00 15 1120
A.
cloudy skies with minimal precipitation
B.
clear skies with minimal precipitation
C.
cloudy skies with moderate precipitation
D.
clear skies with heavy precipitation

Answers

B Answer:

Explanation:

Higher, 1020 mb +, rising pressure and temp are associated with clear skies and low precipitation

Based on the weather data provided, it is likely that Andrea will experience clear skies with minimal precipitation during her fishing trip.

This is because the temperature remains fairly consistent throughout the morning, indicating that there is no significant weather front moving through the area. Additionally, the pressure readings show a high-pressure area forming, which typically indicates stable weather conditions with clear skies and little chance of precipitation.

Therefore, the answer is option B: clear skies with minimal precipitation.

What volume of nitrogen reacts with 33. 6 litres of oxygen to produce nitrogen

dioxide

Answers

The balanced chemical equation for the reaction of nitrogen and oxygen to produce nitrogen dioxide is:

2NO + O2 → 2NO2

According to the equation, 1 mole of nitrogen reacts with 0.5 moles of oxygen to produce 1 mole of nitrogen dioxide.

To determine the volume of nitrogen required to react with 33.6 L of oxygen, we need to convert the volume of oxygen to moles, and then use the mole ratio to find the moles of nitrogen required, and finally convert to volume of nitrogen.

Using the ideal gas law, we can convert the given volume of oxygen to moles:

n(O2) = PV/RT

where P is the pressure, V is the volume, R is the gas constant, and T is the temperature in Kelvin.

Assuming standard temperature and pressure (STP) conditions of 1 atm and 273 K, we get:

n(O2) = (1 atm) × (33.6 L) / [(0.0821 L·atm/mol·K) × (273 K)] = 1.37 moles of O2

Using the mole ratio from the balanced chemical equation, we know that 2 moles of NO react with 1 mole of O2. So the number of moles of NO required to react with 1.37 moles of O2 is:

n(NO) = 2 × (1.37 moles of O2) = 2.74 moles of NO

Finally, we can convert the moles of NO to volume using the ideal gas law:

V(NO) = n(NO)RT/P

Assuming STP conditions again, we get:

V(NO) = (2.74 mol) × (0.0821 L·atm/mol·K) × (273 K) / (1 atm) ≈ 60.4 L

Therefore, approximately 60.4 L of nitrogen would be required to react with 33.6 L of oxygen to produce nitrogen dioxide, under the given conditions.

To know more about chemical refer here

https://brainly.com/question/29240183#

#SPJ11

How many moles of N2 are in a flask with a volume of 250mL at a pressure of 300. 0kPa and a temperature of 300. 0K?

Answers

There are approximately 0.0364 moles of N2 in the flask.

To calculate the number of moles of N2 in a flask with a volume of 250mL at a pressure of 300.0kPa and a temperature of 300.0K, we need to use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to convert the volume from mL to L by dividing it by 1000: 250mL ÷ 1000 = 0.25L.

Next, we need to convert the pressure from kPa to atm by dividing it by 101.3 (which is the conversion factor between kPa and atm): 300.0kPa ÷ 101.3 = 2.96atm.

Now we can plug in the values and solve for n: n = (PV) / (RT) = (2.96atm x 0.25L) / (0.08206 L·atm/mol·K x 300.0K) = 0.0364 moles of N2.

Therefore, there are approximately 0.0364 moles of N2 in the flask.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

You have been transported to another dimension where the rules you have learned
in chemistry apply but the elements are different.
write the formula for the following binary compound. mars twide (include a photo
of your work)
on their periodic table ma is mars and can be found in the 3 column on the periodic
table and tw is twix and can be found in the 6th column on the periodic table
make sure to type the final answer in the space provided using appropriate script
and attach a photo of your work. make sure the photo is just of this questions and
has your name visible on it.

Answers

Ma is the equivalent of an element that belongs to the [tex]3_r_d[/tex] column of the periodic table, while Tw is the equivalent of an element that belongs to the 6th column of the periodic table in this alternate dimension.

What is Compound?

In chemistry, a compound is a substance composed of two or more different types of elements chemically bonded together in a fixed proportion. The elements in a compound are combined in a way that results in a new substance with different chemical and physical properties from the individual elements that make it up.

Let's assume that Ma has a charge of +3 and Tw has a charge of -2 in this alternate dimension. To balance the charges, we need 3 Tw atoms for every 2 Ma atoms.

To know more about Compound, visit;

https://brainly.com/question/29108029

#SPJ4

Imagine a piston with an external pressure of 1 bar that contains liquid water, water vapor, and nitrogen gas. the piston is in thermal contact with a large reservoir held at 270.15 k. initially the partial pressure of water vapor in the piston is 489 pa; nothing changes for a long time. at some point the water crystallizes and the system comes to a new equilibrium; the new partial pressure of water vapor in the piston is 475 pa. calculate the difference in the chemical potential for liquid and crystalline water at 270.15 k. (to think about: does the sign of your answer make sense

Answers

The difference in the chemical potential for liquid and crystalline water at 270.15 K is -0.97 J/mol.


1. Convert given pressures to atm: initial partial pressure of water vapor (P1) = 489 Pa / 101325 Pa/atm = 0.00482 atm, and new partial pressure (P2) = 475 Pa / 101325 Pa/atm = 0.00469 atm.


2. Use the Clausius-Clapeyron equation: ln(P2/P1) = -(ΔH_sub/R)(1/T2 - 1/T1), where ΔH_sub is the enthalpy of sublimation, R is the gas constant, and T1 and T2 are the initial and final temperatures, both equal to 270.15 K.


3. Rearrange the equation to solve for ΔH_sub: ΔH_sub = R * (ln(P2/P1))/(1/T2 - 1/T1), and substitute the values: ΔH_sub = 8.314 J/mol K * (ln(0.00469/0.00482))/(0 - 0) = -0.97 J/mol.


4. The negative sign makes sense as the system moves to a new equilibrium with a lower chemical potential for crystalline water, indicating a more stable phase.

To know more about Clausius-Clapeyron equation click on below link:

https://brainly.com/question/29409537#

#SPJ11

Fill in the missing symbol in this nuclear chemical equation

Answers

The question does not provide a specific nuclear chemical equation to work with, so it is difficult to provide a direct answer. However, I can provide some general information about nuclear chemical equations.

Nuclear chemical equations are used to represent nuclear reactions. These reactions involve changes in the nucleus of an atom, typically involving the addition or removal of protons and/or neutrons. Unlike chemical reactions, which involve the sharing or transfer of electrons, nuclear reactions involve changes in the core of the atom.

A typical nuclear chemical equation includes a reactant on the left side of the equation and a product on the right side. The reactant and product are both represented by chemical symbols, such as H for hydrogen or O for oxygen. The number of protons and neutrons in the reactant and product may differ, indicating a change in the nucleus.

In some cases, the nuclear chemical equation may be missing a symbol. This could indicate that the product is unknown or has not been determined. It is also possible that the missing symbol represents a hypothetical or theoretical product, rather than an actual substance.

In summary, nuclear chemical equations are used to represent nuclear reactions, which involve changes in the nucleus of an atom. The equations include reactants and products represented by chemical symbols, and may occasionally include missing symbols indicating an unknown or theoretical product.

To know more about chemical equation refer here

https://brainly.com/question/30087623#

#SPJ11

Other Questions
what are causes for expansion being justified the expression when c=56 and d=10 Assume that a hypothetical economy with an MPC of 0. 8 is experiencing a severe recession. Instructions: In part a, round your answers to 1 decimal place. Enter your answers as a positive number. In part b, enter your answers as a whole number. A. By how much would government spending have to rise to shift the aggregate demand curve rightward by $50 billion the larger the size, the greater the groups influence, but only up to about people. unanimous groups exert pressure to conform than those with a dissenter. the greater the expertise and status of the group members, the greater their influence; however, primarily affects informational social influence, while mainly affects normative social influence. Please help me out on this one NEEDED IN 30-40 MINS Pls. Im falling in class rnUse the data table that shows the estimation of the daily resting energy expenditure (REE) to explore how calorie requirements change as a person gets older. Follow the steps to calculate the REE for a person over time. Record your calculations in the table. 1. Decide to calculate the REE for a male or female. 2. Choose an adult weight. 3. Calculate the REE for the adult from age 18-29, 30-60, and over 60. Assume the adult maintains the same body weight at each age help pls I will mark brainliest the top answer i need it rnNonsense = REPORT Answer the question 3-5 sentences. "Why is recycling very important and beneficial to you and your community?" You cannot remember the address of Kayahs website. What type of tool will help youlocate/find it by typing in keywords to look for it? How does word choice affect the emotional impact of She Walks in Beauty? Pay special attention to connotation rather than denotation. Use evidence from the text to support your response. The function y=f(x) is graphed below. What is the average rate of change of the function f(x) on the interval 3x8? Why is it important to change the sampling rate in analog to digital converter? find the volume of the solid obtained by rotating the region bounded by 2 =8 32? and 2 = -2y about the line x= 9. round to the nearest thousandth. (0)Which major process involves the removal of water from intestinal contents?absorptioningestiondefecationmechanical breakdown 3f(4)3g(2) = ?Ayuda por favor Calculate the ph of a formic acid solution that contains 1.44% formic acid by mass. (assume a density of 1.01 g/ml for the solution.) social skill, one of the components of emotional intelligence (ei), refers to personal proficiency in managing relationships and building networks.group startstrue or false What is the equation through the points: (6, 10), (5, -6)ASAP please Reddyalgebraic expressions with exponents - instruction - level f) amelia stores her gardening supplies in two cube-shaped boxes. the smaller box has avolume of 100 in.. amelia wants to know the total volume of both boxes.s = length (in) of one side of the larger box.6) write an expression to show the totalvolume of the two boxes. A bond with a face value of and a quoted price of has a selling price of. 100 Points! Algebra question. Only looking for an answer to B. Please show as much work as possible. Thank you! Photo attached.