The pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K would be 3.91 x 10^-23 Pa.
Ideal gas problemIn a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K, we can use the ideal gas law to calculate the pressure. However, it is important to note that the ideal gas law assumes that the gas molecules are in constant motion and interact with each other through perfectly elastic collisions, which may not be entirely accurate for outer space conditions.
The ideal gas law is given by:
PV = nRT
where P is the pressure in pascals (Pa), V is the volume in cubic meters (m3), n is the number of moles of gas, R is the gas constant (8.314 J/(mol·K)), and T is the temperature in Kelvin (K).
We are given that there is 1 molecule/cm3 in this region of outer space. This can be converted to the number of moles of gas using Avogadro's number:
1 molecule/cm3 = 1.66 x 10^-24 mol/m3
The volume can be assumed to be very large since we are in outer space, so we can approximate it as infinity (i.e., V = ∞).
Now we can plug in the values:
PV = nRT
P(∞) = (1.66 x 10^-24)(8.314)(3)
P = 3.91 x 10^-23 Pa
Therefore, the pressure in a region of outer space where there is 1 molecule/cm3 and the temperature is 3 K is approximately 3.91 x 10^-23 Pa.
More on ideal gas can be found here: https://brainly.com/question/3961783
#SPJ1
What is the pure substance that cannot be broken down into simpler substances?
A pure substance that cannot be broken down into simpler substances is water.
A pure substance is a substance made up of one type of atom or molecule that cannot be broken down into simpler substances. This means that the substance has a fixed chemical composition that does not vary from sample to sample. Examples of pure substances include water, carbon dioxide, and salt.
The pure substance that cannot be broken down into simpler substances is called an element. An element is a substance that is made up of only one type of atom. Examples of elements include hydrogen, oxygen, and iron. Each element has a unique set of chemical and physical properties that distinguish it from other elements.
Elements are organized into the periodic table based on their atomic structure and properties. Elements can combine to form compounds, which are made up of two or more different elements chemically bonded together. Compounds can be broken down into their constituent elements by chemical means, but elements cannot be broken down into simpler substances.
Therefore, elements are considered pure substances that cannot be broken down any further.
To know more about pure substance refer here:
https://brainly.com/question/24462192#
#SPJ11
what are some enthalpy changes involved in ionic crystal formation?
Explanation:
In the formation of an ionic crystal, several enthalpy changes are involved. These include:
Lattice energy: The energy released when gaseous ions come together to form a solid ionic compound.
Ionization energy: The energy required to remove an electron from an atom or ion in the gas phase.
Electron affinity: The energy released when an electron is added to an atom or ion in the gas phase.
Hydration energy: The energy released when an ion is surrounded by water molecules in solution.
Heat of solution: The energy absorbed or released when a solute dissolves in a solvent.
Overall, the formation of an ionic crystal involves a complex interplay of these different enthalpy changes. The strength of the forces holding the ions together in the crystal lattice depends on the balance between these different energy contributions.
Question 25b please.
Will give branliest!!!
25 (b) 106 g of Na2CO3 is needed to produce 22.4 dm³ of CO2 at STP in this reaction.
What is meant by molar volume?Volume occupied by one mole of a substance at a given temperature and pressure is known as molar volume.
Balanced equation shows that 1 mole of Na2CO3 produces 1 mole of CO2. Therefore, the number of moles of CO2 produced in 22.4 dm^3 of gas at STP is:
n = V/VM = 22.4/22.4 = 1 mol
So we need 1 mole of Na2CO3 to produce this amount of CO2.
Molar mass of Na2CO3 is:
2Na + C + 3O = (2x23) + 12 + (3x16) = 106 g/mol
Therefore, mass of Na2CO3 needed is:
As mass = n x molar mass = 1 mol x 106 g/mol = 106 g
So, 106 g of Na2CO3 is needed to produce 22.4 dm³ of CO2 at STP in this reaction.
To know more about molar volume, refer
https://brainly.com/question/11676583
#SPJ1
tungsten-halogen lamps operate at very high temperatures (high enough to literally fry eggs) and should not be used in fixtures that have paper- or cellulose-lined sockets. group of answer choices true false
The statement that tungsten-halogen lamps operate at very high temperatures (high enough to literally fry eggs) and should not be used in fixtures that have paper- or cellulose-lined sockets is TRUE.
What is a tungsten halogen lamp?A tungsten halogen lamp is a type of incandescent lamp that contains a small amount of halogen gas such as iodine or bromine inside the bulb, which reacts with the tungsten filament when the bulb is turned on. Tungsten halogen lamps are widely used in stage lighting, film projection, automobile headlights, and other applications that require high-intensity lighting.
They generate a lot of heat when in operation, reaching temperatures high enough to cook an egg. The high operating temperature of tungsten halogen lamps can melt paper or cellulose-lined sockets, posing a potential fire hazard.
Tungsten halogen lamps should not be used in fixtures with paper- or cellulose-lined sockets because the heat generated by the lamp can melt the lining and cause the fixture to catch fire. Instead, fixtures that use tungsten halogen lamps should be designed to withstand the high temperatures they generate.
To know more about tungsten-halogen lamps, refer here:
https://brainly.com/question/2625320#
#SPJ11
Describe the method of separateing salt and water from their solutions
Answer:
Water and salt can be separated through the process of distillation or evaporation. The water is boiled till it evaporates into vapor and leaves salt behind as a solid. The boiling point of water is lower compared to the boiling point of salt.
Explanation:
The method of separating salt and water from their solutions is called evaporation or condensation
Here are the steps:
1. Pour the saltwater solution into a heat-resistant container, such as a glass or metal beaker.
2. Place the container on a heat source, such as a hot plate or stove.
3. Heat the solution until the water begins to evaporate. The salt will remain in the container as the water turns into steam.
4. Once all the water has evaporated, turn off the heat source and allow the container to cool.
5. As the steam cools, it will condense back into liquid form, leaving the salt behind.
6. Carefully remove the salt from the container using a utensil, such as a spatula or a spoon.
7. Discard the remaining water, or save it for other uses.
To know more about evaporation or condensation,
https://brainly.com/question/5019199?referrer=searchResults
https://brainly.com/question/18200686?referrer=searchResults
when carbonyl compounds are reduced with a reagent such as lialh4 or nabh4 and a new stereogenic center is formed, what will the composition of the product mixture be?
When carbonyl compounds are reduced with a reagent such as LiAlH₄ or NaBH₄ and new stereogenic center is formed, chemical change will lead to form products that form a racemic mixture of two enantiomers with alcohol as its composition.
A Chemical change is defined as a change which occurs when a substance combines with another substance to form a new substance as product. Also, when a substance decomposes to give new substances it is also considered as a chemical change.
The reduction of an unsymmetrical ketone with the reducing agents LiAlH4 or NaBH4 gives a pair of stereoisomers. This is because the hydride ion can attack from either face of a planar carbonyl group. And , If no other chiral center is present, then the product is a racemic mixture of two enantiomers. The carbonyl group is converted to alcohol in the end product of such reactions.
To know more about carbonyl compounds here
https://brainly.com/question/24351517
#SPJ4
Draw a graph of number of electrons in the halogen molecule against the boiling point of the halogen. Label each point in your graph with the formula halogen and molecule. Can you see a trend. Make notes on your observation, draw a horizontal line in your graph to show room temperature.
As we travel down in the group, the halogens' boiling points rise. The resultant molecules may have a single carbon atom or as many as a million.
What relationship exists between the boiling point of a halogen and the amount of electrons in its molecule?The attractive force grows as the number of electrons decreases in the group, and more energy is needed to counteract these forces, raising the boiling point.
What is the pattern of halogens' boiling points?Fluorine's boiling point of -188°C, Chlorine's of -34.6°C, Bromine's of 58.8°C, and iodine's of 184°C, as well as the trend in melting temperatures, are explained by the strengthening intermolecular interactions that bind the halogen molecules together.
To know more about halogens visit:-
brainly.com/question/11156152
#SPJ1
Copper, like cobalt, is also an important metal in the making of smartphones. How should a company like Apple respond to learning about such an environmental mining disaster at a copper mine from which the company acquires material? Explain.Post a detailed response to the Company Accountability Discussion prompt. Then respond to two classmates' posts.
If a company like Apple were to learn about an environmental mining disaster at a copper mine from which they acquire materials, they should respond by taking immediate action to address the situation.
How should the environmental impact be handled?Firstly, the company should investigate the impact of the disaster on the local environment and the communities living in the area. They should work with independent experts and local stakeholders to understand the extent of the damage and the potential long-term consequences. This information will be crucial in determining the appropriate response.
Secondly, the company should review their supply chain and identify any potential risks or issues related to the mining operations. They should engage with their suppliers and work together to address the situation and ensure that responsible mining practices are being followed.
Learn more about environmental impact:https://brainly.com/question/29638468
#SPJ1
select all of the compounds from the following list that are strong acids in aqueous solution. a. HF b. H2SO4 c. HBr d. H2CO3.
The compounds HF, [tex]H_2SO_4[/tex], and HBr are strong acids in aqueous solution.
Strong acids are molecules that can easily donate protons to water molecules in aqueous solution. This dissociation of protons from the acid molecules creates a solution that is highly acidic, often with a pH of less than 7.Hydrofluoric acid (HF), sulfuric acid ([tex]H_2SO_4[/tex]), and hydrobromic acid (HBr) are all strong acids in aqueous solution. This is because the conjugate bases of these acids are generally much less stable than the acids themselves, which makes them more likely to dissociate and donate protons in water.The higher the difference in stability, the more likely it is that the acid will dissociate in water and the stronger the acid will be.
learn more about aqueous solution Refer:brainly.com/question/26856926
#SPJ1
if you were asked to dissolve a solid into an aqueous solution, how could you speed this process up? how could you slow it down? listed below are a number of possible ways to alter the rate of this process. place them in the proper category. if you need help, think about putting sugar in your tea. items: add the solute in large chunks. add the solute slowly. increase the atmospheric pressure. stir or agitate the solution.
The answer is it will take longer to dissolve the solute in the solution. Add the solute slowly. Stir or agitate the solution. Increase the atmospheric pressure. Add the solute in large chunks. If a solute is added slowly, it will take longer to dissolve in the solution.
Stirring or agitating the solution will improve the rate at which the solute dissolves in the solution because it helps to break up the solute particles into smaller pieces, which increases the solute's contact with the solvent. Increasing the atmospheric pressure has the potential to improve the rate of dissolving a solid in a solution. The atmospheric pressure is the weight of the air over the surface of the solution. The higher the pressure, the more gas molecules are present in the atmosphere, and the more they will be compressed against the surface of the solution. The rate of dissolving of a solid in a solution can be slowed down by adding the solute in large chunks. As a result, it will take longer to dissolve the solute in the solution.
for more such question on atmospheric pressure
https://brainly.com/question/19587559
#SPJ11
consider combustion of coal in pure oxygen (oxycombustion) and in air. the percent theoretical oxidizer in each case is 100%. which case will have a higher adiabatic flame temperature?
The adiabatic flame temperature is the temperature of the flame when no heat is lost to the surroundings during combustion. In pure oxygen (oxycombustion), the combustion process involves the reaction of coal with pure oxygen.
This process provides a higher concentration of oxygen, leading to higher combustion temperatures compared to combustion in air. In contrast, air contains only 21% oxygen, and the combustion process is less efficient due to the presence of nitrogen, which acts as a heat sink.
Therefore, combustion in pure oxygen will have a higher adiabatic flame temperature than combustion in air. This higher temperature can be advantageous in certain industrial processes that require high temperatures, such as steel production, glass manufacturing, and chemical synthesis. However, pure oxygen is expensive to produce, so the cost of oxycombustion may be higher than combustion in air.
To learn more about combustion refer to:
brainly.com/question/29139908
#SPJ4
How many grams of CO2 would be made from 3.0 g of C6H6
the chemical structure of vitamin b12 contains cobalt. T or F
the given statement is true. The construction of B12 depends on a corrin ring, which is like the porphyrin ring tracked down in heme. The focal metal particle is cobalt.
As secluded as an air-stable strong and accessible monetarily, cobalt in vitamin B12 (cyanocobalamin and other vitamers) is available in its +3 oxidation state.
Cyanocobalamin is a cobalt-containing coordination compound produced by digestive organisms and a characteristic water-solvent nutrient of the B-complex family that should consolidate with Inborn Elements for retention by the digestive system. Cyanocobalamin is important for hematopoiesis, neural metabolism, DNA and RNA creation, and starch, fat, and protein metabolism. B12 works on iron capabilities in the metabolic cycle and helps folic corrosive in choline union. B12 metabolism is interconnected with that of folic corrosive. Lack of vitamin B12 causes noxious iron deficiency, megaloblastic weakness, and neurologic injuries.
to know more about Vitamin B12 click here:
https://brainly.com/question/22468338
#SPJ4
PLS HELP I WILL MARK BRAINLIEST!!!!!
C3H8 + 4 O2 ➞ 3 CO2 + 5 H2O
How many moles of CO2 are produced from the combustion of 6.40 mol C3H8 ?
Answer: 19.2 mols
Explanation:
3*6.40 mol so 19.2 mols are produced. This is because the ratio of C3H8 to CO2 is 1 to 3 so there are three times as many moles of CO2 as C3H8.
how much heat does it take to increase the temperature of 2.90 moles of a diatomic ideal gas by an amount 25.0 k if the gas is held at constant volume? the gas molecules can translate and rotate but not vibrate. express your answer using three significant figures.
The heat does it take to increase the temperature of 2.90 moles of a diatomic gas by an amount 25.0 K if the gas is held at the constant volume is 1506.9 J.
The number of moles of the gas = 2.90 moles
The change in the temperature of the gas ΔT = 25 K
For the constant volume process , the expression is as :
Q = n CΔT
For the diatomic ideal gas , the specific heat capacity at the constant volume is : C = 5/2 R
Q = 2.90 × 5/2 × 8.314 × 25
Q = 1506.9 J
Thus, the heat need it take to increase the temperature is 1506.9 J.
To learn more about diatomic gas here
https://brainly.com/question/21119359
#SPJ4
Does the haloform test proceed more rapidly as more of the protons are substituted
The haloform test does not proceed more quickly as more of the protons are replaced.
This is because the haloform test is not influenced by the presence of protons. The haloform reaction is a well-known test for carbonyl compounds that react with hypochlorite (NaClO) in the presence of a base (OH) to produce haloforms. The haloform reaction is a typical aldehydic and ketonic carbonyl group reaction that yields a haloform (e.g., CHX3, where X is halogen) and a carboxylate. The haloform reaction proceeds with a carbonyl group as the starting material. The alpha hydrogen on the carbonyl group is removed by base and oxidized by hypochlorite to form the haloform.
When the reaction occurs, three alpha hydrogen atoms are replaced by halogen atoms, resulting in the formation of haloform. The presence of protons in a molecule does not speed up the reaction rate of the haloform reaction. The haloform test reaction rate is influenced by the concentration of NaOH (a base) and hypochlorite (NaClO). As a result, the haloform test does not proceed more quickly as more protons are replaced.
For more questions on haloform test
https://brainly.com/question/10710179
#SPJ11
Please help me!!!I will give full stars and points!!!
The temperature of a given volume of water changes as heat is added at a consistent pace, as shown by the water heating curve. The temperature of the water does not vary throughout a phase shift, creating a plateau on the graph.
What does chemistry's heating process entail?When a substance is heated to a material-specific phase-change temperature, the phase transition from solid to liquid occurs immediately.
How does one heat water using a formula?Water has a specific heat capacity of 4.18 J/g/°C. The amount of heat, or Q, is what we want to know. To do this, we would apply the formula Q = m•C•T. Knowing the m and C allows for the calculation of the T.
To know more about temperature visit:-
brainly.com/question/29072206
#SPJ1
when running the ldh assay using the lactate stock solution, what is the lactate concentration in the cuvette? why do you need to know this value? (hint: this is an important question!)
Lactate concentration in the cuvette for LDH assay can not be determined as this value would need to be specified in the experimental setup. The value should be known to assess lactate dehydrogenase activity.
The lactate concentration in the cuvette can be calculated using the Beer-Lambert law, which relates the absorbance of a sample to its concentration. The equation is A = εlc, where A is the absorbance, ε is the molar absorptivity coefficient, l is the path length of the cuvette (usually 1 cm), and c is the concentration in moles per liter.
Knowing the lactate concentration in the cuvette is important because it allows us to determine the activity of lactate dehydrogenase (LDH), the enzyme being assayed. LDH catalyzes the conversion of lactate to pyruvate, and the rate of this reaction depends on the concentration of lactate. By measuring the change in absorbance over time, we can calculate the initial rate of the reaction and use this information to determine the activity of LDH.
Learn more about LDH here.https://brainly.com/question/14663795
#SPJ11
lime is used in farming to reduce the acidity of the soil. the chemical name for lime is calcium oxide. when water in the soil reacts with lime, what base is formed?
The chemical reaction of lime (calcium oxide) with water in the soil produces calcium hydroxide, a base. This reaction occurs when water molecules interact with the calcium oxide molecules, forming calcium hydroxide. The equation for this reaction is CaO + H₂O → Ca(OH)₂
Calcium oxide is produced by heating limestone to a high temperature. When calcium oxide is mixed with water, calcium hydroxide is produced. It is also called slaked lime.
Calcium hydroxide, a base, helps to reduce the acidity of the soil. It can do this because it has a pH greater than 7. The reaction between lime and water helps to neutralize the soil pH by releasing hydroxide ions which bond with hydrogen ions in the soil, causing the acidity to decrease. This is especially beneficial for plants, as acidic soil can stunt their growth.
Calcium hydroxide is used in a variety of applications, including the production of cement.
Overall, when water reacts with lime (calcium oxide) in the soil, calcium hydroxide is formed. This base helps to reduce the acidity of the soil, making it more suitable for plant growth.
To know more about Calcium hydroxide, refer here:
https://brainly.com/question/9584549#
#SPJ11
Convert a anthracite coal price of$90/ton to$/MMBtu. Heat content of anthracite coal is 15,000 Btu/pound.$15.52/MMBtu\$3/MMBtu \$90.00/MMBtu 3.86/MMBtu
The coal cost of $90/ton with an intensity content of 7000 BTU for every pound is D: $6.42/MMBtu.
The recipe to compute MMBtu from tons is as per the following -
Cost per mmbtu = cost per ton × 500/BTU per pound
Keep the qualities in the equation to find the cost per MMBtu
Cost per mmbtu = (90×500)/7000
Performing augmentation in the numerator on Right Hand Side of the situation
Cost per mmbtu = 45000/7000
Performing division on Right Hand Side of the situation to find the cost per MMBtu for coal
Cost per mmbtu = $6.42/mmbtu
Accordingly, the right choice is D: $6.42/MMBtu.
to know more about the coal click here:
brainly.com/question/22647554
#SPJ4
an atom of a mystery element contains 7 protons, 7 neutrons, and 7 electrons. what is the mass number?
the mass number of the mystery element is 14. The mass number of an atom is the total number of protons and neutrons in its nucleus.
The mass number of an atom is the sum of the number of protons and neutrons in its nucleus. This number represents the total number of particles (protons and neutrons) in the atom's nucleus.
In the case of the mystery element, it has 7 protons and 7 neutrons, which means its mass number is 14. The number of electrons in an atom is equal to the number of protons in its nucleus, which in this case is also 7.
The mass number is an important property of an atom as it determines the atom's atomic weight, which is the average weight of all the isotopes of an element. Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei, and therefore have different mass numbers. The atomic weight is calculated by taking the average of the mass numbers of all the isotopes of an element, weighted by their relative abundance.
Understanding the mass number is essential in many areas of science, including chemistry and nuclear physics, as it helps to describe the structure, stability, and behavior of atoms and their interactions with other atoms.
To know more about mass number, visit: brainly.com/question/4408975
#SPJ4
Can you guys please tell me what to write
A grease fire started on the stove, it was then covered completely with a fire blanket so that the fire goes out. Identify the limiting reactant in this situation.
A.the grease
B.the blanket
C.the fire
D.oxygen
Oxygen, abbreviated O2, is the limiting reactant in this scenario. Limiting Reactor: The fire equation is O2 + Fuel = CO2 + H2O
How fire is exhausted?When a pile of leaves is set on fire and the fire is covered with a fire blanket to put it out, the blanket restricts the amount of oxygen the fire can access, which lowers the amount of oxygen present and lowers the amount of CO2 and H2O that can be created.
How can limiting reagents be discovered?By dividing the volume of each solution by its molarity, you can get the number of moles of each reactant. By dividing the number of moles of each reactant by its stoichiometric coefficient in the balanced chemical equation, you may determine which reactant is the limiting one.
To know more about limiting reactant visit:-
brainly.com/question/14225536
#SPJ1
determine the empirical formula and/or molecular formula of a compound from percent composition or mass data
The empirical formula of the compound is: CH4.
To determine the empirical formula and/or molecular formula of a compound from percent composition or mass data, follow the steps below:
Empirical Formula:
Step 1: Calculate the mass of each element present in the compound.Step 2: Divide the mass of each element by its atomic weight.Step 3: Calculate the mole ratio by dividing each element's mole value by the smallest mole value.Step 4: Write the empirical formula by multiplying each subscript by the smallest integer that will produce whole numbers.Molecular Formula:
Step 1: Calculate the empirical formula mass by adding the atomic masses of all atoms in the empirical formula.Step 2: Calculate the mass of the empirical formula and divide the molecular mass of the compound by the empirical formula mass.Step 3: Multiply each subscript of the empirical formula by the result of step 2 to get the molecular formula.Example: What is the empirical formula of a compound that contains 14.3 g of carbon and 4.8 g of hydrogen?
Step 1: Calculate the mass of each element present in the compound. C = 14.3 gH = 4.8 gStep 2: Divide the mass of each element by its atomic weight. C = 14.3 g / 12.01 g/mol = 1.19 molTo know more about "Empirical formula" & "Molecular formula" refer here:
https://brainly.com/question/13058832#
#SPJ11
the compound [18f]2-fluoro-2-deoxyglucose is a(n): group of answer choices antibiotic. imaging agent used to detect tumors. positive regulator of glycolysis. potent anticancer agent. intermediate in glycolysis.
The compound [18F]2-fluoro-2-deoxyglucose is an imaging agent used to detect tumors.
[18F]2-fluoro-2-deoxyglucose is a radiolabeled glucose analogue that is used in positron emission tomography (PET) imaging. The compound is taken up by cells in the body and accumulates in tissues with high glucose metabolism, such as tumors.
The radiolabeled fluorine-18 emits positrons, which interact with electrons in the body to produce gamma rays that can be detected by a PET scanner. The signal from the gamma rays is then used to produce images of the tissues that have taken up the compound.
The use of [18F]2-fluoro-2-deoxyglucose in PET imaging has become an important tool for the detection and staging of tumors, as well as for monitoring the response to treatment. It is particularly useful for imaging tumors that are difficult to detect with other imaging techniques, such as small or metastatic tumors.
To know more about detect tumors, refer here:
https://brainly.com/question/14584081#
#SPJ11
the buoyant force acting on the Lucia before the torpedo attack
The buoyant force acting on the Lucia before the torpedo attack was the upward force on the submarine due to the water it displaces when submerged.
This force is determined by the submarine's volume and the density of the water it is submerged in. This force essentially counteracts the downward force of gravity, allowing the Lucia to remain at a constant depth underwater.The buoyant force acting on the Lucia before the torpedo attack was the force of the water pushing up on the hull of the ship, which counteracted the force of gravity pulling it down. This buoyancy kept the ship afloat, allowing it to remain afloat even when it was loaded with cargo and crew.
learn more about buoyant force Refer:brainly.com/question/21990136
#SPJ1
complete question:Describe the buoyant force acting on the Lucia before the torpedo attack.
3 screenshots! Please help
1. The volume of the 12.0 g of methane, CH₄ is 16.8 L
2. The new celsius temperature of the gas is -153.8 °C
3i. The partial pressure for CO₂ is 0.575 atm
3ii. The partial pressure for O₂ is 0.2875 atm
3iii. The partial pressure for water is 0.2875 atm
1. How do i determine the volume of the gas?First, we shall obtain the mole of the gas. This shown below:
Mass of methane, CH₄ (m) = 12 gramsMolar mass of methane, CH₄ (M) = 16 g/molMole of methane, CH₄ =?Mole = mass / molar mass
Mole of methane, CH₄ = 12 / 16
Mole of methane, CH₄ = 0.75 mole
Finally, we shall determine the volume of the methane, CH₄
Mole of methane, CH₄ = 0.75 moleVolume of methane, CH₄ =?From ideal gas equation,
1 mole of methane, CH₄ = 22.4 L
Therefore,
0.75 mole of methane, CH₄ = 0.75 × 22.4
0.75 mole of methane, CH₄ = 16.8 L
Thus, the volume of methane, CH₄ is 16.8 L
2. How do i determine the new temperature?The new temperature of the gas can be obtained as follow:
Initial temperature (T₁) = 25 °C = 25 + 273 = 298 KInitial volume (V₁) = 10 LNew volume (V₂) = 4 LNew temperature (T₂) =?Charles' law equation is given as follow:
V₁ / T₁ = V₂ / T₂
Inputting the variables, we have
10 / 298 = 4 / T₂
Cross multiply
10 × T₂ = 298 × 4
Divide both side by 10
T₂ = (298 × 4) / 10
T₂ = 119.2 K
Subtract 273 to obtain answer in °C
T₂ = 119.2 - 273 K
T₂ = -153.8 °C
Thus, the new temperature is -153.8 °C
3. How do i determine the partial pressure?i. Partial pressure for CO₂ can be obtained as follow:
Percentage of CO₂ = 50%Total percentage = 100%Total pressure = 1.15 atmPartial pressure of CO₂ =?Partial pressure of CO₂ = (percentage of CO₂ / total percent) × total pressure
Partial pressure of CO₂ = (50 / 100) × 1.15
Partial pressure of CO₂ = 0.575 atm
ii. Partial pressure for O₂ can be obtained as follow:
Percentage of O₂ = 25%Total percentage = 100%Total pressure = 1.15 atmPartial pressure of O₂ =?Partial pressure of O₂ = (percentage of O₂ / total percent) × total pressure
Partial pressure of CO₂ = (25 / 100) × 1.15
Partial pressure of O₂ = 0.2875 atm
iii. Partial pressure for water can be obtained as follow:
Partial pressure of CO₂ = 0.575 atmPartial pressure of O₂ = 0.2875 atmTotal pressure = 1.15 atmPartial pressure of water =?Total pressure = Partial pressure of CO₂ + partial pressure of O₂ + partial pressure of water
1.15 = 0.575 + 0.2875 + partial pressure of water
1.15 = 0.8625 + partial pressure of water
Collect like terms
Partial pressure of water = 1.15 - 0.8625
Partial pressure of water = 0.2875 atm
Learn more about partial pressure:
https://brainly.com/question/15577259
#SPJ1
Who thought that, if left unchecked, a population would outgrow its food source?
Reverend Thomas Robert Malthus initially put forth the Malthusian hypothesis of population growth in 1798, which predicts that an unrestrained population would surpass its food supply.
What is stated by the Malthusian theory of population growth?According to the hypothesis, sickness, starvation, war, and other calamities will eventually ensue when the food supply cannot keep up with the increase in the human population. Malthus established the Statistical Society of London and was a well-known statistician and political economist.
Does the Malthusian theory contend that there will be an imbalance between population and food production?Thomas Robert Malthus famously prophesied in 1798 that if human population expansion outpaced food production, short-term advances in living standards would inevitably be undermined and pull living standards back towards subsistence.
To know more about hypothesis visit:-
https://brainly.com/question/16362295
#SPJ1
Explain to me in detail why Sulfur (S) has a negative charge of 2-. What is it trying to fulfill? *
What does this make it?
Sulfur has a negative charge of 2 because it has gained two electrons to fulfill its octet rule.
Sulfur and octet ruleSulfur (S) has a negative charge of 2 because it has gained two electrons to fulfill its octet rule, which is a guideline in chemistry stating that atoms tend to gain, lose or share electrons to achieve a stable electron configuration of eight valence electrons (except for hydrogen and helium, which need only two electrons).
Sulfur is in Group 6 of the periodic table, which means it has six valence electrons. In order to fulfill the octet rule and achieve a stable electron configuration, it needs to gain two more electrons. When sulfur gains two electrons, it forms a stable S2- ion, which has a total of eight valence electrons.
The negative charge on the S2- ion arises because electrons are negatively charged particles. When sulfur gains two electrons, the total negative charge of the ion is increased by the charge of the two electrons, which is -2. Therefore, the S2- ion has a net charge of -2.
This makes sulfur an anion, which is a negatively charged ion. Anions are formed by gaining electrons, which leads to an excess of negative charge. In contrast, cations are positively charged ions, which are formed by losing electrons, resulting in an excess of positive charge.
More on sulfur can be found here: https://brainly.com/question/1478186
#SPJ1
What purpose does the sulfuric acid play in the Fischer esterification reaction?What is the purpose of the Dean-Stark trap?
In the Fischer esterification reaction, sulfuric acid acts as a catalyst that facilitates the reaction between a carboxylic acid and an alcohol to form an ester. The sulfuric acid protonates the carboxylic acid, making it more reactive towards the alcohol.
The acid also facilitates the removal of water from the reaction mixture, which drives the equilibrium towards the formation of the ester. This results in a higher yield of the ester product. The Dean-Stark trap is a piece of equipment used in the Fischer esterification reaction to remove water from the reaction mixture. It is a special type of condenser that collects the water formed during the reaction and allows it to separate from the organic layer.
To know more about Fischer esterification, here
brainly.com/question/31041190
#SPJ4