Answer:
I think that it is Trachea
honeybees are covered with tiny hairs. what function do you think the hairs perform as the bee travels from flower to flower
Answer:
To pick up extra pollen while flying from flower to flower, also it helps to pollinate other flowers
Explanation:
If I’m wrong im sorry
Answer:
It carrys pollen from one flower to another.
Explanation:
Based on the three formulas shown, use one of them to solve for the purple yellow and red box and explain how you did it.
P = 11.133 atm (purple)
T = -236.733 °C(yellow)
n = 0.174 mol(red)
Further explanationSome of the laws regarding gas, can apply to ideal gas (volume expansion does not occur when the gas is heated),:
Boyle's law at constant T, P = 1 / V Charles's law, at constant P, V = T Avogadro's law, at constant P and T, V = nSo that the three laws can be combined into a single gas equation, the ideal gas equation
In general, the gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm
V = volume, liter
n = number of moles
R = gas constant = 0.08206 L.atm / mol K
T = temperature, Kelvin
To choose the formula used, we refer to the data provided
Because the data provided are temperature, pressure, volume and moles, than we use the formula PV = nRT
Purple box
T= 10 +273.15 = 373.15 K
V=5.5 L
n=2 mol
[tex]\tt P=\dfrac{nRT}{V}\\\\P=\dfrac{2\times 0.08205\times 373.15}{5.5}\\\\P=11.133~atm[/tex]
Yellow boxV=8.3 L
P=1.8 atm
n=5 mol
[tex]\tt T=\dfrac{PV}{nR}\\\\T=\dfrac{1.8\times 8.3}{5\times 0.08205}\\\\T=36.42~K=-236.733^oC[/tex]
Red boxT = 12 + 273.15 = 285.15 K
V=3.4 L
P=1.2 atm
[tex]\tt n=\dfrac{PV}{RT}\\\\n=\dfrac{1.2\times 3.4}{0.08205\times 285.15}\\\\n=0.174~mol[/tex]
Which statement correctly describes the reactivity of noble gases, according to the octet rule?
Their atoms have one electron in their valence shells, so noble gases are very reactive.
Their atoms have eight electrons in their valence shells, so noble gases are very unreactive.
Their atoms have one electron in their valence shells, so noble gases are very unreactive.
Their atoms have eight electrons in their valence shells, so noble gases are very reactive.
What properties of matter are the same for that substance no matter how much there is?
Answer:
physical properties
Explanation:
Intensive properties: A physical property that will be the same regardless of the amount of matter.
density: ρ=mv
color: The pigment or shade
conductivity: electricity to flow through the substance
malleability: if a substance can be flattened
luster: how shiny the substance looks
Boat A and Boat B have the same mass. Boat A's velocity is three times greater than that of Boat B. Compared to the
kinetic energy of Boat B, the kinetic energy of Boat A is
O one-third as much.
3
O three times as much.
O six times as much.
O nine times as much.
Answer:nine times as much
Explanation:
Answer: 9x as much
Explanation:
Who would most likely be required to work with sodium hydroxide?
a plumber
a gardener
a bricklayer
a mechanic
Need answer ASAP
Sodium hydroxide NaOH is proven to be an active agent for improving the mechanical properties of the bricks. Hence, bricklayer most likely need sodium hydroxide.
What is sodium hydroxide?Sodium hydroxide is an ionic compound formed by the metallic sodium and water. Sodium hydroxide has the chemical formula NaOH. It is a strong base and used as a reagent in many chemical synthesis which has to be carried in presence of a base.
Sodium hydroxide has an effect on the drying kinetics of bricks which are made with clay. Studies reported that the drying duration is linearly related with the concentration of NaOH.
Drying duration of bricks layers increases with increase in concentration of NaOH as well as the material porosity decreases. and hence the bricks will not show the visible cracks. Therefore, bricklayer need NaOH.
To find more on NaOH, refer here;
https://brainly.com/question/28177652
#SPJ5
Answer:
A) a plumber
Explanation:
I need help please answer
Where do the glucose molecules that our cells need come from?
Answer:
glucose molecules that our cells need from is plants
It is MOST accurate to say that body mass index (BMI) provides information about __________.
A.
body composition
B.
an individual's height-weight ratio
C.
cardiorespiratory fitness levels
D.
an individual's height
It is most accurate to say that body mass index (BMI) provides information about an individual's height-weight ratio.
What is body mass index?
BMI takes into account natural variations in body shape, giving a healthy weight range for a particular height.
As well as measuring your BMI, healthcare professionals may take other factors into account when assessing if you're a healthy weight individual.
Muscle is much denser than fat, so very muscular people, such as heavyweight boxers, weight trainers and athletes, may be a healthy weight even though their BMI is classed as obese.
Your ethnic group can also affect your risk of some health conditions. For example, adults of South Asian origin may have a higher risk of some health problems, such as diabetes, with a BMI of 23, which is usually considered healthy.
Learn more about body mass index,here:
https://brainly.com/question/10694067
#SPJ2
Calculate the following expression and round your answer to the correct number of significant figures.
52.6cm x 1.214cm
Answer:
63.9 cm
Explanation:
What is the chemical name for Se2CI
Answer: caesium oxide
Explanation:I think sorry if I’m wrong
What is the name of the the following formula Cd(HOOCCOO)2
Answer:
I think that is called oxalic acid
Explanation:
Choose all the answers that apply.
What are the habits of mind that a scientist must possess?
creativity
skepticism
artistic ability
reasoning
bias
Answer:
Creativity
Skepticism
Reasoning
Explanation:
Scientists must see a creative way to solve problems in the world. Scientists must also be skeptic about what is said, because if they were not, no one would disagree and the problems would never be solved. Reasoning is a must, as reasoning is involved in the scientific process and writing conclusions to their studies.
Hope this help!
Which phase change requires more heat energy, Heat of fusion or Heat of
vaporization? Explain in terms of particle arrangements.
Answer:
heat of fusion
Explanation:
heat of fusion is melting which requires more heat energy than heat of vaporization
When an extended structure is dissolved in water, it releases potassium (K) and chlorine (Cl) atoms in the
water
Which statement correctly describes the nature of this substance?
A.It is made of K and Cl atoms.
B.It is made of K molecules and Cl atoms.
C.It is made of K atoms and Cl molecules.
D.It is made of KCl molecules
Answer:
A.It is made of K and Cl atoms.
Explanation:
An atom is the smallest indivisible unit of an element while a molecule is the smallest particle of an element/compound that retains its chemical properties. However, the molecule is two or more atoms held together by means of a chemical bond e.g. Cl2 molecule consists of two atoms of Chlorine.
Hence, if an extended structure dissolves in water to release pottasium (K) and Chlorine (Cl) atoms, it means it is made up of K and Cl atoms. This is because the substance will dissociate l, in the presence of water, into it's simplest form which is the atomic level.
A chemist prepares a solution of sodium carbonate by measuring out of sodium carbonate into a volumetric flask and filling the flask to the mark with water. Calculate the concentration in of the chemist's sodium carbonate solution. Be sure your answer has the correct number of significant digits.
Answer:
The correct answer will be "[tex]9.45\times 10^{-5} \ mol/L[/tex]".
Explanation:
We have:
Moles of solute (Na₂Co₃) = [tex]18.9 \mu \ mol[/tex]
= [tex]18.9\times 10^{-6}[/tex]
[tex]1 \mu \ mol[/tex] = [tex]10^{-6} \ mol[/tex]
Now,
The volume of the solution will be:
⇒ [tex]0.200 \ L[/tex]
∴ [tex]{1 \ mL=0.001 \ L}[/tex]
The formula to find the concentration will be:
⇒ [tex]Concentration = \frac{moles \ of \ solute \ (mol)}{Volume \ of \ solution \ (L)}[/tex]
On substituting the given values, we get
⇒ [tex]=\frac{18.9\times 10^{-6}}{0.200}[/tex]
⇒ [tex]=9.45\times 10^{-5} \ mol/L[/tex]
The Periodic Table is a chart of elements arranged in rows and columns according to their what
physical properties.
chemical properties.
name.
place of origin.
A chemist forms 16.6 g of potassium iodide by combining 3.9 g of potassium with 12.7 g of iodine. Show that these results are consistent with the law of conservation of mass.
The law of conservation of mass states that mass can neither be created nor destroyed by chemical reactions or physical transformations.
The mass of potassium iodide can be calculated from the sum of the mass of potassium and iodine.
The mass of potassium iodide is as follows:-
[tex]Mass\ of \ potassium\ iodide=3.9\ g+12.7\ g\\=16.6\ g[/tex]
So, the total mass of potassium iodide is equal to the mass of potassium plus iodine. So, these results are consistent with the law of conservation of mass.
To know more about:-
brainly.com/question/14502981
what is magnetism? please answer
Answer:
a physical phenomenon produced by the motion of electric charge, resulting in attractive and repulsive forces between objects.
:0
Explanation:
Answer:
Explanation:
Magnetism is the power to attract. It refers to the attraction to iron and other metals in electric currents and magnets, or to the other kind of attraction — where people want to be close to each other.
plz mark as brainliest
if the density of a bar of gold is 19.3g/cm^3and you cut it into four pieces , what is its density of each piece of gold
Considering the definition of density and intensive and extensive properties, the density of each piece of gold is 19.3 [tex]\frac{g}{cm^{3} }[/tex]
Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space. In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance.
Intensive properties are those that will remain unchanged even though the amount of matter varies, while extensive properties vary depending on the amount of matter in a body.
Density is an intensive property, so it is independent of the sample size. This is because the solute will be present in a certain proportion with respect to the solvent. That ratio will not change unless more solute or more solvent is added. Consequently, the concentration remains constant (concentration is an intensive property) and density too.
Finally, the density of each piece of gold is 19.3 [tex]\frac{g}{cm^{3} }[/tex]
Learn more about density:
brainly.com/question/952755?referrer=searchResults brainly.com/question/1462554?referrer=searchResults
The smallest particle of any particular type of matter is known by which of the following terms?
Group of answer choices
Compound
Chemical
Element
Atom
50 Points!! 25 Each Points Please Help ASAP!! View Attached Image!! Will Mark Brainliest If All Are Answered!!
Answer:
f
a
c
e
b
reactant
b
f
a
e
d
c
b
Explanation:
Which is the jellylike substance within cells? plasma membrane DNA cytoplasm ribosomes
Answer:
Cytoplasm is the semi fluid gel like substance of a cell that is present within the cellular membranes and surrounds the nucleus.
Explanation:
Hope this helps :)
Answer:
cytoplasm is correct
Explanation:
i took the test
what is balance equation
Answer:
Balanced equations are those whose coefficients result in equal numbers of atoms for each element in the reactants and products.
In science class, Blaine’s teacher puts one glow stick in a cup of hot water and another glow stick in a cup of cold water. She asks the students to think about how the temperature of the water will affect the chemical reaction that occurs inside the glow stick once it is bent and starts to glow.
Which glow stick will be brighter once it is bent? Explain your answer.
Answer:
The glow stick in hot water will be brighter
Explanation:
The glow stick in hot water will be brighter than the glow stick in cold water because the heat from the hot water will cause the molecules in the glow stick to move faster. The faster the molecules move in the glow stick, the sooner and brighter the reaction will be. The cold water will cause molecules to move slowly and it will take longer for the reaction to occur, which will also make it less bright.
Answer:
The glow stick that was in the cup of hot water will be brighter once it is bent. The production of more light is evidence that the chemical reaction in the glow stick is happening faster. The reaction happens faster, because increasing the temperature increases the rate of a chemical reaction.
Explanation:
Just took assignment
An atom of potassium has 19 protons and 20 neutrons. Its mass number is
Answer:
the mass no. is 39.0983 that is... 40
A car traveling at a constant speed of 75 miles/hr for 7.5 hours will go how far?
a
10 miles
562.5 miles
b
O.c
Od
751.5 miles
199 miles
Answer:
The answer is 562.5 milesExplanation:
The distance covered by an object given it's velocity and time taken can be found by using the formula
distance = velocity × time
From the question we have
distance = 75 × 7.5
We have the final answer as
562.5 milesHope this helps you
Mr. Stark thinks that a special juice will increase the productivity of workers. He creates two groups of 50 workers each and assigns each group the same task (in this case, they're supposed to staple a set of papers). Group A is given the special juice to drink while they work. Group B is not given the special juice. After an hour, Mr. Stark counts how many stacks of papers each group has made. Group A made 1,587 stacks, Group B made 2,113 stacks.
Identify the independent variable and dependent variable
Identify the control group and experimental group
Explanation:
taking a special juice independent variable
the number of stuck of paper dependent variable
the control group is group B
experimental group is Group A
for more information study on thougtco
Find the volume of a gold ring that has a mass of 12.00 grams. The density of gold is 19.30 g/mL. The volume is
Answer:
The answer is 0.622 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 12 g
density = 19.30 g/mL
We have
[tex]volume = \frac{12}{19.30} \\ = 0.62176165...[/tex]
We have the final answer as
0.622 mLHope this helps you
Which of the following types of soil has the greatest permeability?
A. Loam
B. Sandy
C. Clay
D. Silty
Answer:
Sandy soil
Explanation:
Sandy soil has the greatest permeability of all soil types. It has a high amount of pore space and grain size.
Permeability is the ability of fluids to pass between the grains of a substance, here soil. It is usually a function of the size of the pore spaces and the grain size.
Sandy soils are usually made up of particles with sand-sized shapes and dimension. They have bigger and finer grains with little to no cement. This allows for a high level of permeability with no impediment to flow.Clay soil has very fine grain and with very low permeability. Silty soils have fair enough permeability and the permeability of loam straddles between that of sand and clay.Permeability is very important for determining the quality of soils.
For each compound, write the cation and anion with the appropriate charge. Then write the chemical formula for each compound.
Example: sodium fluoride: Na+1, F-1 NaF
a. Magnesium oxide
b. Strontium iodide
c. Aluminum chloride
d. Calcium phosphide
Answer:
Magnesium oxideStrontium iodideAluminum chlorideCalcium phosphide5% and NanO2 Cax[tex]x^{2}[/tex]