we need to mix 3.68 g of Na2HPO4 and 2.89 g of NaH2PO4 to prepare 1.00 L of a buffer with a total phosphate concentration of 0.0500 M and a pH of 7.45.
pH = pKa + log([base]/[acid])
Substituting the values:
7.45 = 7.20 + log([Na2HPO4]/[NaH2PO4])
0.25 = log([Na2HPO4]/[NaH2PO4])
Antilog(0.25) = [Na2HPO4]/[NaH2PO4]
1.78 = [Na2HPO4]/[NaH2PO4]
Let x be the amount of Na2HPO4 in moles and y be the amount of NaH2PO4 in moles.
Then:
x + y = 0.0500 (total moles of phosphate)
141.96x + 119.98y = (0.0500)(141.96 + 119.98) (total mass of phosphate)
Solving these equations simultaneously, we get:
x = 0.0259 mol
y = 0.0241 mol
Mass of Na2HPO4 = 0.0259 mol × 141.96 g/mol = 3.68 g
Mass of NaH2PO4 = 0.0241 mol × 119.98 g/mol = 2.89 g
Concentration in chemistry refers to the amount of a substance dissolved in a given volume of a solvent. It is a fundamental concept in chemistry and is used to describe the strength of a solution. The concentration of a solution is usually expressed in terms of the amount of solute present per unit volume of the solution. There are several ways to express concentration, including molarity, molality, mole fraction, and percent by mass or volume.
Molarity is the most commonly used unit of concentration and is defined as the number of moles of solute per liter of solution. The concentration of a solution plays an important role in determining its properties and behavior. For example, a highly concentrated solution of salt will have a higher boiling point and lower freezing point than a dilute solution. Concentration also affects the rate of chemical reactions, as higher concentrations of reactants typically result in faster reaction rates.
To learn more about Concentration visit here:
brainly.com/question/10725862
#SPJ4
Without checking their boiling points, how would you expect Cl2’s boiling point to compare to Br2's? Explain.
Based on their molecular properties, I would expect that the boiling point of Cl2 would be lower than that of Br2.
How does the boiling points compare?The boiling point of a substance is largely determined by the strength of the intermolecular forces between its molecules. In particular, substances with stronger intermolecular forces tend to have higher boiling points.
Both Cl2 and Br2 are halogens and exist as diatomic molecules. However, Br2 has more electrons than Cl2, and as a result, it has more electrons available for intermolecular interactions.
This means that Br2 molecules can form stronger London dispersion forces with each other than Cl2 molecules can. London dispersion forces are the weakest intermolecular force, but they still contribute to the overall strength of intermolecular attractions.
Learn more about boiling point:https://brainly.com/question/2153588
#SPJ1
Acceleration refers to the rate of change in an object’s 5.________
Answer:
velocity
Explanation:
How many total atoms are there in 62.5 g
of carbon disulfide ( CS2)?
Total atoms:
Answer:
first molecular mass of cs2= 12+2×32=76amu
no of moles=62.5/76=0.822moles
total no of molecules=6.022×[tex]10^{23}[/tex]×0.822=4.95×[tex]10^{23}[/tex]
total no of atoms ( one carbon disulfide has 3 atoms)=3×4.95×[tex]10^{23}[/tex]=14.85×[tex]10^{23}[/tex] atoms
Explanation:
i hope you find it helpful, have a nice day
In 62.5 g of carbon disulfide (CS2), there are approximately 1.48 x 10^24 total atoms. This is calculated by first finding the number of moles in 62.5 g, then multiplying this by the number of atoms in each mole (Avogadro's number).
Explanation:To calculate the total atoms in a 62.5 g of carbon disulfide (CS2), you need to first find the molar mass of CS2 which is 76.14 g/mol (12.01 g for C + 2 * 32.06 g for S). Using Avogadro's number (6.02 x 10^23) which represents the number of entities in a mole, we can calculate the number of moles and then the total number of atoms.
First, calculate the number of moles in 62.5 g of CS2: 62.5 g / 76.14 g/mol = 0.820 moles
Second, calculate the total atoms: 0.820 moles * 3 atoms/mole * 6.02 x 10^23 = 1.48 x 10^24 atoms
Learn more about Atom Count here:https://brainly.com/question/31881632
#SPJ3
what is steam distillation ?
Answer:
Steam distillation is a specialized method of distillation used to extract essential oils, aromatic compounds, and other volatile substances from plants or other materials that are sensitive to high temperatures. This technique involves passing steam through the plant material, which vaporizes the volatile compounds, and then condensing the steam and the vaporized compounds into a liquid form.
The steam distillation process is typically carried out in a distillation apparatus, which consists of a boiling flask, a condenser, and a receiver. The plant material is placed in the boiling flask and steam is introduced into the flask from a separate boiler or steam generator. The steam then passes through the plant material, vaporizing the essential oils and other volatile compounds. The steam and the vaporized compounds then pass through the condenser, where they are cooled and condensed into a liquid form, which is collected in the receiver.
Steam distillation is particularly useful for extracting essential oils and aromatic compounds from plant materials that are too delicate to withstand the high temperatures required for traditional distillation techniques. It is commonly used in the production of essential oils for use in perfumes, aromatherapy, and other applications. Additionally, steam distillation is a relatively simple and inexpensive method of extracting volatile compounds from plant materials, making it a popular choice for small-scale producers and hobbyists.
What is the molarity (M) of a bleach solution containing 9.50 grams of bleach (NaOCI) in 2,000 ml of solution? BLEACH
show work
The molarity of the bleach solution is 0.0637 M.
Steps
To find the molarity (M) of the bleach solution, we first need to calculate the number of moles of NaOCl present in the given mass of bleach. We can use the formula:
moles = mass / molar mass
where the molar mass of NaOCl is 74.44 g/mol.
mass of NaOCl = 9.50 g
molar mass of NaOCl = 74.44 g/mol
moles of NaOCl = 9.50 g / 74.44 g/mol = 0.1274 mol
Next, we need to calculate the volume of the solution in liters, since molarity is defined as the number of moles of solute per liter of solution:
volume of solution = 2,000 ml = 2.000 L
Now we can calculate the molarity of the bleach solution:
Molarity = moles of NaOCl / volume of solution
= 0.1274 mol / 2.000 L
= 0.0637 M
Therefore, the molarity of the bleach solution is 0.0637 M.
learn more about molarity here
https://brainly.com/question/26873446
#SPJ1
The volume of a sample of hydrogen gas was decreased from 10.89 L
to 4.18 L
at constant temperature. If the final pressure exerted by the hydrogen gas sample was 8.95 atm,
what pressure did the hydrogen gas exert before its volume was decreased?
Answer:
3.44 atm
Explanation:
boyles law
p1v1=p2v2
p1*10.89 L=4.18 L*8.95 atm
p1*10.89=4.18*8.95
p1*10.89 = 37.411
p1 = 37.411/10.89
p1 = 3.43535353535
A solid chloride sample weighing 0.3147 g required 43.75 mL of 0.05273 M AgNO, to reach the Ag,CrO, end point.
a. How many moles Cl ion were present in the sample? (Use Eqs. 2 and 3.)
b. How many grams Cl- ion were present? (Use Eq. 4.)
c. What was the mass percent C ion in the sample? (Use Eq. 5.) moles Cr g Cr % Cr
Answer:its a
Explanation: i juts know it is hope it helps
50 points
Which type of process is this.
Chemical Process
Physical Process
Nuclear Process
Explanation:
That's Nucleus process
What is the maximum mass of aluminum chloride that can be formed when reacting 28.0 g of aluminum with 33.0 g of chlorine?
Aluminum and chlorine react to generate aluminium chloride, according to a balanced chemical equation: 2Al + 3Cl2 2AlCl3. A quantity of aluminium chloride up to 139.5 g can be produced.
What is the most amount of aluminium chloride that can be created when 27 g of aluminium and 32 g of chlorine are combined?When the limiting reagent is totally transformed into products, the maximum amount of product is produced. Two moles of aluminium chloride are created by a full reaction between three moles of chlorine. Hence, 46.4 g of aluminium chloride is the maximum mass that can be produced.
The amount of aluminium and chlorine in the specified masses can be calculated as follows:
Number of moles of aluminum = 28.0 g / 27 g/mol = 1.04 mol
Number of moles of chlorine = 33.0 g / 35.5 g/mol = 0.93 mol
We may get the theoretical yield of aluminium chloride using the balanced equation: 2Al + 3Cl2 → 2AlCl3
1.04 mol Al × (2 mol AlCl3 / 2 mol Al) × (133.34 g AlCl3 / 1 mol AlCl3) = 139.5 g AlCl3
To know more about aluminium chloride visit:-
https://brainly.com/question/16088530
#SPJ1
C2H6O + 3 O2 → 2 CO2 + 3 H2O
How many moles of CO2 is produced with 8.5 g of O2
0.32 mol
5.7 mol
0.53 mol
0.18 mol
The number of moles of CO₂ produced from the reaction of 8.5 g of oxygen gas, O₂ is 0.18 mole (last option)
How do i determine the number of mole of CO₂ produced?We shall begin by obtaining the mole in 8.5 g of oxygen gas, O₂. Details below:
Mass of oxygen gas, O₂ = 8.5 grams Molar mass of oxygen gas, O₂ = 32 g/mol Mole of oxygen gas, O₂ =?Mole = mass / molar mass
Mole of oxygen gas, O₂ = 8.5 / 32
Mole of oxygen gas, O₂ = 0.266 mole
Finally, we shall determine the number of mole of CO₂ produced. Details below:
C₂H₆O + 3O₂ -> 2CO₂ + 3H₂O
From the balanced equation above,
3 moles of O₂ reacted to produce 2 moles of CO₂
Therefore,
0.266 mole of O₂ will react to produce = (0.266 × 2) / 3 = 0.18 mole of CO₂
Thus, the number of mole of CO₂ produced is 0.18 mole (last option)
Learn more about number of mole:
https://brainly.com/question/13375719
#SPJ1
How is an oxbow lake and a deep meander different? its for 14 points.
Answer: Oxbow-shaped meanders have two sets of curves: one curving away from the straight path of the river and one curving back. An oxbow lake starts out as a curve, or meander, in a river.
Explanation:
WORTH 100 POINTS, ANSWER ALL PARTS
INFO. An unknown compound containing tellurium and bromine is analyzed and it is determined that 28.53% of the compound by mass is composed of tellurium.
Part A. What quantity in moles of Te are present in 100.00 g of the compound?
Part B. What is the mass percent of Br in the compound?
Part C. What quantity in moles of Br are present in 100.00 g of the compound?
Part D. Determine the empirical formula of the unknown compound.
Part E. Provide the correct IUPAC name of the unknown compound.
The energy diagram shows the changes in energy during a chemical reaction.
Which statement best describes the total energy change of the system?
Potential energy
Reaction progress
A. The reactants have lower potential energy, and energy is
absorbed.
B. The reactants have lower potential energy, and energy is released.
C. The reactants have higher potential energy, and energy is released.
• D. The reactants have higher potential energy, and energy is
absorbed.
Answer: D.
Explanation:
In an exothermic reaction, the reactants have higher potential energy than the products, and energy is released. In an endothermic reaction, the reactants have lower potential energy than the products, and energy is absorbed. In this case, the statement that best describes the total energy change of the system is D. The reactants have higher potential energy, and energy is absorbed.
I hope this helps. Let me know if you have any other questions!
10. For the reaction
2C(s)+N2(g)+5H2⇌2CH3NH2(g)
with K=1.8×10−6. If you begin the reaction with 1.0 mol of N2, 2.0 mol of H2, and sufficient C(s) in a 2.00 L container, what are the concentrations of N2 and CH3NH2 at equilibrium? What happens to K if the concentration of H2 is doubled?
Answer: The balanced chemical equation for the given reaction is:
2C(s) + N2(g) + 5H2(g) ⇌ 2CH3NH2(g)
The equilibrium constant expression for the reaction is:
Kc = [CH3NH2]^2/([N2][H2]^5)
At the beginning of the reaction, the concentration of N2 is 1.0 mol/2.00 L = 0.50 M and the concentration of H2 is 2.0 mol/2.00 L = 1.0 M. The concentration of C(s) is not given, but it is assumed to be large enough that its concentration does not change significantly during the reaction. Let the concentration of CH3NH2 at equilibrium be x mol/L. Then, according to the stoichiometry of the reaction, the equilibrium concentrations of N2 and H2 are (0.50 - x) mol/L and (1.0 - 5x) mol/L, respectively.
Substituting these values into the equilibrium constant expression and solving for x, we get:
Kc = [CH3NH2]^2/([N2][H2]^5)
1.8×10−6 = x^2/[(0.50 - x)(1.0 - 5x)^5]
1.8×10−6 (0.50 - x)(1.0 - 5x)^5 = x^2
1.8×10−6 (0.50 - x)(1 - 5x)^5 = x^2
This is a cubic equation that can be solved numerically to find the value of x, which represents the equilibrium concentration of CH3NH2. Using a numerical solver, we find that x = 5.42×10^-4 M. Therefore, the equilibrium concentrations of N2 and CH3NH2 are 0.50 - x = 0.499 M and x = 5.42×10^-4 M, respectively.
If the concentration of H2 is doubled, its concentration at equilibrium becomes 2.0 M - 5x. Substituting this new value into the equilibrium constant expression, we get:
K'c = [CH3NH2]^2/([N2][H2]^5)
K'c = (x^2)/[(0.50 - x)(2.0 - 5x)^5]
The value of K'c is different from Kc because it depends on the new concentration of H2. To find the ratio of K'c to Kc, we can divide the two expressions:
K'c/Kc = [(x^2)/[(0.50 - x)(2.0 - 5x)^5]] / [(x^2)/[(0.50 - x)(1.0 - 5x)^5]]
K'c/Kc = [(2.0 - 5x)^5]/[(1.0 - 5x)^5]
Substituting x = 5.42×10^-4, we get:
K'c/Kc = [(2.0 - 5(5.42×10^-4))^5]/[(1.0 - 5(5.42×10^-4))^5]
K'c/Kc = 1.31
Therefore, if the concentration of H2 is doubled, the equilibrium constant Kc increases by a factor of 1.31.
At standard temperature and pressure, a given sample of water vapor occupies a volume of 2.80 L. What is the weight of the water?
Explanation:
The weight of water vapor can be determined by using the ideal gas law, which relates the pressure, volume, and temperature of a gas to the number of moles of gas present. We can then use the molar mass of water to calculate the weight of the water vapor.
At standard temperature and pressure (STP), the pressure is 1 atm and the temperature is 273.15 K. The ideal gas law is expressed as:
PV = nRT
where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K), and T is the temperature in Kelvin.
Rearranging this equation to solve for n, we have:
n = PV/RT
Substituting the values we know, we get:
n = (1 atm)(2.80 L) / (0.08206 L·atm/mol·K)(273.15 K)
n = 0.1082 mol
The molar mass of water is 18.01528 g/mol, so the weight of the water vapor is:
weight = n x molar mass
weight = 0.1082 mol x 18.01528 g/mol
weight = 1.952 g
Therefore, the weight of the water vapor is 1.952 g.
Glutamic acid is an amino acid with pKa values of 2.19, 4.25 and 9.67, a-ketoglutarate is a bivalent organic acid. What is the approximate charge
difference between glutamic acid and a-ketoglutarate at pH 9.5?
a) 1 1/2
b) 2
c) 0
d) 1/2
e) 1
The approximate charge difference between glutamic acid and a-ketoglutarate at pH 9.5 would be 1. Option E.
Charge difference between 2 amino acidsAt pH 9.5, the protonation state of glutamic acid and a-ketoglutarate can be determined as follows:
Glutamic acid: At pH 9.5, the carboxyl group (-COOH) will be deprotonated, and the amino group (-NH2) will be protonated, giving the species -COO-CH2-CH(NH3+)-COO-.
The side chain carboxyl group (-COOH) can also be deprotonated to a small extent, giving the species -COO-CH2-CH(NH3+)-COO- and -COO-CH2-CH(NH2)-COO-. At this pH, the predominant species will be the first one, since the pKa of the carboxyl group is 2.19, which means that it will be mostly deprotonated at pH 9.5.
a-ketoglutarate: At pH 9.5, both carboxyl groups (-COOH) will be deprotonated, giving the species -COO-CH2-CO-CH2-COO-.
Therefore, the charge difference between glutamic acid and a-ketoglutarate at pH 9.5 can be calculated by subtracting the number of positive charges (protonated amino group) and negative charges (deprotonated carboxyl groups) in a-ketoglutarate from the corresponding charges in glutamic acid:
Glutamic acid: -1 (protonated amino group) - 2 (deprotonated carboxyl groups) = -3
a-ketoglutarate: 0 (no protonated amino group) - 2 (deprotonated carboxyl groups) = -2
Therefore, the charge difference is: -3 - (-2) = -1
More on amino acids can be found here: https://brainly.com/question/15687833
#SPJ1
The (C4H1 0)3N represents a _______ amine.
Answer:
Tertiary amine
Explanation:
An amine in which the nitrogen atom is directly bonded to three carbons of any hybridization which cannot be carbonyl group carbons.
The CF4 molecule has a central C atom bonded to four F atoms, as shown in the figure. Which of the following statements about the CF4 molecule is or are true?
I. The electrons in the C-F bonds are attracted to both the C and F nuclei.
II. The Lewis structure of CF4 shows four bonding pairs of electrons and no nonbonding pairs.
III. Every atom in the CF4 molecule satisfies the octet rule.
A: I and III are true.
B: II and III are true.
C: Only one of the statements is true.
D: All three statements are true.
E: I and II are true.
The correct answer is B. The Lewis structure of CF4 indicates four bonding pairs of electrons and no nonbonding pairs. and Every atom in the CF4 molecule satisfies the octet rule.
Lewis structures are used to determine the molecular geometry and bonding patterns in molecules. It is named after Gilbert N. Lewis, who introduced the concept of the chemical bond and valence electrons. In a Lewis structure, each atom is represented by its chemical symbol, and its valence electrons are shown as dots or lines around the symbol. The dots represent electrons that are not involved in chemical bonding, while the lines represent covalent bonds between atoms.
Covalent bonds are formed by the sharing of electrons between atoms, and the number of electrons shared between atoms determines the strength of the bond. They also help in predicting the polarity and reactivity of molecules. For example, a molecule with a polar covalent bond will have a dipole moment and will be more reactive in chemical reactions. Overall, the Lewis structure is a fundamental tool in chemistry that allows us to understand the behavior of molecules and their interactions with other molecules.
To learn more about Lewis structure visit here:
brainly.com/question/20300458
#SPJ4
I need the answer for number 2
Answer:
+ Triple covalent bond (CB) > double CB > single CB in terms of bond strength and energy needed to break the bonds
+ Triple bonds are the most reactive, double bonds are reactive but single bonds are unreactive
+ Single bond > double bond > triple bond in bond length
+ in single bond, 2 electrons are shared
+ in double bond, 4 electrons are shared
+ in triple bond, 6 electrons are shared
If a negatively charged object is brought near a neutrally charged sphere what will happen
Answer:
If a negatively charged object is brought near a neutral sphere, the electrons in the neutral sphere will move away from the negatively charged object, causing one side of the sphere to become slightly negative and the other side to become slightly positive.
Explanation:
This is because the negative charge repels the electrons in the neutral sphere, creating an imbalance of charges on the sphere.
look at the reaction and Ans
zinc carbonate+ sulfuric acid = zinc sulfate + carbon Dioxide + water
where did the hydrogen in water come from the reaction?
where did carbon from carbon dioxide come from?
In the given reaction:
zinc carbonate + sulfuric acid = zinc sulfate + carbon dioxide + water
The sulfuric acid was the source of the hydrogen in water. In the process, zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) combine to create zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).
The carbon in zinc carbonate is what produces carbon dioxide (CO2). (ZnCO3). Zinc carbonate (ZnCO3) and sulfuric acid (H2SO4) interact during the process to produce zinc sulfate (ZnSO4), carbon dioxide (CO2), and water. (H2O).
The sulfuric solution is where water gets its hydrogen from. A substance called sulfuric acid is made up of the elements of hydrogen, sulfur, and oxygen.
Hydrogen ions (H+), which combine with the hydroxide ions (OH-) from the zinc carbonate to create water, are released into the solution when sulfuric acid reacts with zinc carbonate.
The carbon particle in the zinc carbonate molecule is where the carbon in carbon dioxide originates. Compounds containing zinc, carbon, and oxygen make up zinc carbonate. The carbon atom joins two oxygen atoms from the sulfuric acid during the reaction to create carbon dioxide. (CO2).
learn more about sulfuric acid here
https://brainly.com/question/10220770
#SPJ1
An object can be moving at a constant speed and still accelerating if it is changing 6.______
If an object is changing directions, it can be moving at a constant speed while yet accelerating.
This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.
StepsAn object's acceleration vector also changes as it changes direction, which causes the object's velocity vector to change.
As a result, even though the item is moving at a constant speed, the change in its velocity vector is causing it to accelerate.
Centripetal acceleration is the term for the type of acceleration that keeps objects moving in a circular motion.
Even though an object's speed is constant while it moves in a circular pattern, it is still accelerating.
This is due to the fact that acceleration is a vector number that takes into consideration the speed of an object both in magnitude and direction.
As an item follows a circular course, its acceleration vector also constantly changes direction along with its velocity vector.
learn more about constant speed here
https://brainly.com/question/2681210
#SPJ1
you’ve had a light snack that has 14 grams of glucose, 4 grams of olive oil, and 3 grams of amino acids. How many calories are in your snack?
The total number of calories in snack that has 14 grams of glucose, 4 grams of olive oil, and 3 grams of amino acids is 141calories.
Given the mass of glucose = 14g
The mass of olive oil = 4g
The mass of amino acids = 3g
To calculate the amount of calories in the snack, we first need to look at the calories per gram of each component of the snack:
Glucose: 4 calories per gram
14 grams of glucose x 4 calories per gram = 56 calories
Olive oil: 9 calories per gram
4 grams of olive oil x 9 calories per gram = 36 calories
Amino Acids: 4 calories per gram
3 grams of amino acids x 4 calories per gram = 12 calories
Now that we have the calories per gram for each component, we can add them together to get the total number of calories in the snack:
56 calories from glucose + 36 calories from olive oil + 12 calories from amino acids = 104 calories
Finally, we can add a 10% calorie adjustment for the other components of the snack (such as fat and fiber) to get the total number of calories:
104 calories + 10% (10.4 calories) = 141.4 calories
Therefore, the total number of calories in your snack is 141.
To learn more about amino acids click here https://brainly.com/question/1837143
#SPJ1
20.00 moles of helium are mixed with 5.00 mole of oxygen gas in a 15.00 L container at 22.0 0C. Calculate the mole fraction of oxygen gas in the mixture.
The total Mole fraction of oxygen is 0.20 or 20% .
What is the gas mixture's formula?P=n(RTV)=n×const. Only the quantity is affected by the gas's nature in the calculation. Let's assume that we have a mixture of two ideal gases that are present in equal quantities based on this supposition.
The total moles of gas in the combination must first be determined:
Total moles of gas = moles of helium + moles of oxygen
Total moles of gas = 20.00 + 5.00
Total moles of gas = 25.00 moles
Next, we need to calculate the mole fraction of oxygen gas:
Mole fraction of oxygen = moles of oxygen / total moles of gas
Mole fraction of oxygen = 5.00 / 25.00
Mole fraction of oxygen = 0.20 or 20% (rounded to two decimal places)
To know more about Mole fraction visit:-
https://brainly.com/question/29808190
#SPJ1
B) Dilution Problems. Calculate the concentration of a) each solute and b) each ion when the following are mixed.
50.0 mL of 0.750 M KOH and 25.0 mL of 0.500 M KOH
a. The final concentration of KOH is 0.500 M.
b. The concentration of K+ and OH- ions is 0.500 M.
Step by step explanationTo solve this problem, we need to use the equation:
M1V1 = M2V2
where M1 is the initial concentration of the solution, V1 is the initial volume of the solution, M2 is the final concentration of the solution, and V2 is the final volume of the solution.
a) To find the concentration of each solute, we need to first determine the final volume of the solution:
Final volume = 50.0 mL + 25.0 mL = 75.0 mL
Now we can use the equation above to find the final concentration of KOH:
M1V1 = M2V2
(0.750 M)(50.0 mL) = M2(75.0 mL)
M2 = (0.750 M)(50.0 mL) / (75.0 mL)
M2 = 0.500 M
Therefore, the final concentration of KOH is 0.500 M.
b) To find the concentration of each ion, we need to use the final concentration of KOH and the fact that KOH dissociates into K+ and OH- ions in solution. The concentration of K+ and OH- ions will be the same as the final concentration of KOH:
[ K+ ] = 0.500 M
[ OH- ] = 0.500 M
Therefore, the concentration of K+ and OH- ions is 0.500 M.
Learn more about ionic concentration here https://brainly.com/question/27586088
#SPJ1
About how many elements are known to form bonds with atoms
Answer:
The number refers to the number of bonds each of the element makes: Hydrogen makes 1 bond, Oxygen makes 2 bonds, Nitrogen makes 3 bonds and Carbon makes 4 bonds. These four elements are widely used when it comes to drawing Lewis structures at introductory chemistry level.
Explanation:
if it helped you please mark me a brainliest :))
HELPPPP
A student dissolves 0.03450 mol of solid salt in 49.83 g of distilled water and observes the temperature of the water rise from 25.2˚C to a final temperature of 31.4˚C. If the calorimeter constant is 37.4 J/˚C, what is the calculated enthalpy of the reaction of the salt in units of kJ/mol? Explain how you would go about solving the problem and show all work for each step in your solution.
The heat of reaction for the dissolution of the salt can be obtained to be 335 kJ/mol.
What is the heat capacity?Heat capacity is the amount of heat energy required to raise the temperature of a substance by a certain amount. More specifically, it is defined as the amount of heat energy required to raise the temperature of a substance by one degree Celsius or one Kelvin. The heat capacity is typically measured in units of joules per degree Celsius (J/°C) or joules per Kelvin (J/K).
We know that the heat that is absorbed can be obtained from;
H = mcdT
H = 49.83 g * 37.4 J/˚C * ( 31.4˚C - 25.2˚C)
H = 11.55 kJ
Then we have;
Hrxn = 11.55 kJ/ 0.03450 mol
= 335 kJ/mol
Learn more about heat capacity:https://brainly.com/question/28302909
#SPJ1
The pOH of a solution is 8.3. Which of the following is true about the solution?
a
It is acidic and has a pH of 5.7.
b
It is acidic and has a pH of 3.8.
c
It is basic and has a pH of 5.7.
d
It is basic and has a pH of 3.8.
An answer has a pOH of 8.3. True about the solution is that it is basic and has a pH of 5.7.
What does "solution" mean in its simplest form?When one or more solutes are dissolved in a solvent, the result is a homogenous mixture known as a solution. a solvent is a substance that helps a solute dissolve so that a homogenous mixture results. When a substance dissolves in a solvent, it forms a homogenous mixture, which is known as a solute.
Why is a solution important in chemistry?A continuous variation in the relative proportions of a number of substances that is homogeneous and can be changed up to the solubility limit. Although the word "solution" is typically used to describe the liquids state of a substance, it is also possible for gases and solids to form solutions.
To know more about Solution visit:
https://brainly.com/question/30665317
#SPJ1
The correct answer is that it is acidic and has a pH of 5.7.
30/3/2023
7 Num 224/321094
CHM 106
irse
Assignment
What Do you understand by the term
florescence the forth
Alatrone
of
Carbon
2 Bxplain it's uses. as Mano tubules, Nano Structures,
Nano Chemist
Fluorescence is a phenomenon where a substance absorbs light at a specific wavelength and then emits light at a longer wavelength. This process occurs when an electron in a molecule or atom absorbs energy, becomes excited, and then returns to its ground state by releasing the absorbed energy as light.
Carbon is a versatile element that forms various allotropes such as graphite, diamond, and fullerenes. In the context of nanotechnology, carbon is used to create nanostructures like carbon nanotubes, graphene, and other related materials.
Carbon nanotubes (CNTs) are cylindrical nanostructures made up of carbon atoms, and they have extraordinary mechanical, electrical, and thermal properties. These properties make CNTs useful in various applications such as electronics, energy storage, and composite materials.
Graphene, another carbon nanostructure, is a single layer of carbon atoms arranged in a hexagonal lattice. It exhibits remarkable electronic, thermal, and mechanical properties. Graphene has potential applications in fields like electronics, sensors, and energy storage.
A nanochemist is a scientist who specializes in studying the synthesis, characterization, and applications of nanomaterials, including carbon-based nanostructures.
In summary, fluorescence is a light emission process that can be observed in certain substances, while carbon nanostructures like carbon nanotubes and graphene are materials with unique properties that have promising applications in nanotechnology.
For more questions on: phenomenon
https://brainly.com/question/23850381
#SPJ11
Suppose 7.64g of iron(II) iodide is dissolved in 250. mL of a 0.20M aqueous solution of silver nitrate.
Calculate the final molarity of iodide anion in the solution. You can assume the volume of the solution doesn't change when the iron(II) iodide is dissolved in it.
Be sure your answer has the correct number of significant digits.
Iodide anion's final molarity in the solution is 0.13388 M.
We can utilise the molarity formula, which is [tex]molarity =\frac{ moles of solute}{liters of solution}[/tex], to solve this problem.
First, we need to calculate the moles of iron(II) iodide.
Use the formula to accomplish this. [tex]moles =\frac{ mass}{molar mass}[/tex]. The molar mass of iron(II) iodide is 227.88 g/mol,
so the moles of iron(II) iodide is [tex]\frac{7.64 g }{227.88 g/mol }= 0.03347 moles[/tex]
Now, we can calculate the molarity of iodide anion.[tex]Molarity of iodide anion = \frac{moles of iodide anion}{liters of solution}[/tex].Since each mole of iron(II) iodide contains 1 mole of iodide anion, the moles of iodide anion is 0.03347 moles.
The liters of solution is 0.250 liters, so the molarity of iodide anion is [tex]\frac{0.03347 moles}{0.250 liters }= 0.13388 M.[/tex]
Therefore, the final molarity of iodide anion in the solution is 0.13388 M.
learn more about iodide anion Refer:brainly.com/question/16751517
#SPJ1